Plsql quick guide

PL/SQL - QUICK GUIDE
http://www.tutorialspoint.com/plsql/plsql_quick_guide.htm Copyright © tutorialspoint.com

The PL/SQL programming language was developed by Oracle Corporation in the late 1980s as procedural extension
language for SQL and the Oracle relational database. Following are notable facts about PL/SQL:

PL/SQL is a completely portable, high-performance transaction-processing language.

PL/SQL provides a built-in interpreted and OS independent programming environment.

PL/SQL can also directly be called from the command-line SQL*Plus interface.

Direct call can also be made from external programming language calls to database.

PL/SQL's general syntax is based on that of ADA and Pascal programming language.

Apart from Oracle, PL/SQL is available in TimesTen in-memory database and IBM DB2.

PL/SQL - ENVIRONMENT SETUP
PL/SQL is not a stand-alone programming language; it is a tool within the Oracle programming environment. SQL*
Plus is an interactive tool that allows you to type SQL and PL/SQL statements at the command prompt. These
commands are then sent to the database for processing. Once the statements are processed, the results are sent back and
displayed on screen.

To run PL/SQL programs you should have Oracle RBDMS Server installed in your machine which will take care of
executing SQL commands. Most recent version of Oracle RDBMS is 11g. You can download a trial version of Oracle
11g from the following link:

Download Oracle 11g Express Edition

You will have to download either 32bit or 64 bit version of the installation as per your operating system. Usually there
are two files, as I have downloaded for 64 bit Windows7. You will also use similar steps on your operating system, does
not matter if it is Linux or Solaris.

win64_11gR2_database_1of2.zip

win64_11gR2_database_2of2.zip

After donwloading above two files, you will need to unzip them in a single directory database and under that you will
find following sub-directories:

Finally click on setup file to start the installation and follow the given steps till the end. If everything has been done
successfully then its time to verify your installation. At your command prompt use the following command if you are
using Windows:

sqlplus "/ as sysdba"

If everything is fine, you should have SQL prompt where you will write your PL/SQL commands and scripts:

Text Editor

Running large programs from command prompt may land you in inadvertently losing some of the work. So a better
option is to use command files. To use the command files:

Type your code in a text editor, like Notepad, Notepad+, or EditPlus etc.

Save the file with the .sql extension in the home directory.

Launch SQL*Plus command prompt from the directory where you created your PL/SQL file.

Type @file_name at the SQL*Plus command prompt to execute your program.

If you are not using a file to execute PL/SQL scripts, then simply copy your PL/SQL code and then right click on the
black window having SQL prompt and use paste option to paste complete code at the command prompt. Finally, just
press enter to execute the code, if it is not already executed.

PL/SQL - BASIC SYNTAX
PL/SQL is a block-structured language, meaning that PL/SQL programs are divided and written in logical blocks of
code. Each block consists of three sub-parts:

S.N. Sections & Description

1 Declarations
This section starts with the keyword DECLARE. It is an optional section and defines all variables, cursors,
subprograms, and other elements to be used in the program.

2 Executable Commands
This section is enclosed between the keywords BEGIN and END and it is a mandatory section. It consists of
the executable PL/SQL statements of the program. It should have at least one executable line of code, which

may be just a NULL command to indicate that nothing should be executed.

3 Exception Handling
This section section starts with the keyword EXCEPTION. This section is again optional and contains
exception(s) that handle errors in the program.

Every PL/SQL statement end with a semicolon (;). PL/SQL blocks can be nested within other PL/SQL blocks using
BEGIN and END. Here is the basic structure of a PL/SQL block:

DECLARE
<declarations section>
BEGIN
<executable command(s)>
EXCEPTION
<exception handling>
END;

The 'Hello World' Example:

DECLARE
message varchar2(20):= 'Hello, World!';
BEGIN
dbms_output.put_line(message);
END;
/

The end; line signals the end of the PL/SQL block. To run the code from SQL command line, you may need to type /
at the beginning of the first blank line after the last line of the code. When the above code is executed at SQL prompt, it
produces following result:

Hello World

PL/SQL procedure successfully completed.

PL/SQL - DATA TYPES
PL/SQL variables, constants and parameters must have a valid data types which specifies a storage format, constraints,
and valid range of values. This tutorial will take you through SCALAR and LOB data types available in PL/SQL and
other two data types will be covered in other chapters.

Category Description

Scalar Single values with no internal components, such as a NUMBER, DATE, or
BOOLEAN.

Large Object (LOB) Pointers to large objects that are stored separately from other data items, such as text,
graphic images, video clips, and sound waveforms.

Composite Data items that have internal components that can be accessed individually. For
example, collections and records.

Reference Pointers to other data items.

PL/SQL Scalar Data Types and Subtypes

PL/SQL Scalar Data Types and Subtypes come under the following categories:

Date Type Description

Numeric Numeric values, on which arithmetic operations are performed.

Character Alphanumeric values that represent single characters or strings of characters.

Boolean Logical values, on which logical operations are performed.

Datetime Dates and times.

PL/SQL provides subtypes of data types. For example, the data type NUMBER has a subtype called INTEGER. You
can use subtypes in your PL/SQL program to make the data types compatible with data types in other programs while
embedding PL/SQL code in another program, such as a Java program.

PL/SQL Numeric Data Types and Subtypes

Following is the detail of PL/SQL pre-defined numeric data types and their sub-types:

Data Type Description

PLS_INTEGER Signed integer in range -2,147,483,648 through 2,147,483,647, represented in 32 bits

BINARY_INTEGER Signed integer in range -2,147,483,648 through 2,147,483,647, represented in 32 bits

BINARY_FLOAT Single-precision IEEE 754-format floating-point number

BINARY_DOUBLE Double-precision IEEE 754-format floating-point number

NUMBER(prec, scale) Fixed-point or floating-point number with absolute value in range 1E-130 to (but not
including) 1.0E126. A NUMBER variable can also represent 0.

DEC(prec, scale) ANSI specific fixed-point type with maximum precision of 38 decimal digits.

DECIMAL(prec, scale) IBM specific fixed-point type with maximum precision of 38 decimal digits.

NUMERIC(pre, secale) Floating type with maximum precision of 38 decimal digits.

DOUBLE PRECISION ANSI specific floating-point type with maximum precision of 126 binary digits
(approximately 38 decimal digits)

FLOAT ANSI and IBM specific floating-point type with maximum precision of 126 binary
digits (approximately 38 decimal digits)

INT ANSI specific integer type with maximum precision of 38 decimal digits

INTEGER ANSI and IBM specific integer type with maximum precision of 38 decimal digits

SMALLINT ANSI and IBM specific integer type with maximum precision of 38 decimal digits

REAL Floating-point type with maximum precision of 63 binary digits (approximately 18
decimal digits)

Following is a valid declaration:

DECLARE
num1 INTEGER;
num2 REAL;
num3 DOUBLE PRECISION;
BEGIN
null;
END;
/

When the above code is compiled and executed, it produces following result:

PL/SQL procedure successfully completed

PL/SQL Character Data Types and Subtypes

Following is the detail of PL/SQL pre-defined character data types and their sub-types:

Data Type Description

CHAR Fixed-length character string with maximum size of 32,767 bytes

VARCHAR2 Variable-length character string with maximum size of 32,767 bytes

RAW Variable-length binary or byte string with maximum size of 32,767 bytes, not
interpreted by PL/SQL

NCHAR Fixed-length national character string with maximum size of 32,767 bytes

NVARCHAR2 Variable-length national character string with maximum size of 32,767 bytes

LONG Variable-length character string with maximum size of 32,760 bytes

LONG RAW Variable-length binary or byte string with maximum size of 32,760 bytes, not
interpreted by PL/SQL

ROWID Physical row identifier, the address of a row in an ordinary table

UROWID Universal row identifier (physical, logical, or foreign row identifier)

PL/SQL Boolean Data Types

The BOOLEAN data type stores logical values that are used in logical operations. The logical values are the Boolean
values TRUE and FALSE and the value NULL.

However, SQL has no data type equivalent to BOOLEAN. Therefore Boolean values cannot be used in:

SQL statements

Built-in SQL functions (such as TO_CHAR)

PL/SQL functions invoked from SQL statements

PL/SQL Datetime and Interval Types

The DATE datatype to store fixed-length datetimes, which include the time of day in seconds since midnight. Valid
dates range from January 1, 4712 BC to December 31, 9999 AD.

The default date format is set by the Oracle initialization parameter NLS_DATE_FORMAT. For example, the default
might be 'DD-MON-YY', which includes a two-digit number for the day of the month, an abbreviation of the month
name, and the last two digits of the year, for example, 01-OCT-12.

Each DATE includes the century, year, month, day, hour, minute, and second. The following table shows the valid
values for each field:

Field Name Valid Datetime Values Valid Interval Values

YEAR -4712 to 9999 (excluding year 0) Any nonzero integer

MONTH 01 to 12 0 to 11

DAY 01 to 31 (limited by the values of MONTH and Any nonzero integer
YEAR, according to the rules of the calendar for the
locale)

HOUR 00 to 23 0 to 23

MINUTE 00 to 59 0 to 59

SECOND 00 to 59.9(n), where 9(n) is the precision of time 0 to 59.9(n), where 9(n) is the
fractional seconds precision of interval fractional
seconds

TIMEZONE_HOUR -12 to 14 (range accommodates daylight savings time Not applicable
changes)

TIMEZONE_MINUTE 00 to 59 Not applicable

TIMEZONE_REGION Found in the dynamic performance view Not applicable
V$TIMEZONE_NAMES

TIMEZONE_ABBR Found in the dynamic performance view Not applicable
V$TIMEZONE_NAMES

PL/SQL Large Object (LOB) Data Types

Large object (LOB) data types refer large to data items such as text, graphic images, video clips, and sound waveforms.
LOB data types allow efficient, random, piecewise access to this data. Following are the predefined PL/SQL LOB data
types:

Data Type Description Size

BFILE Used to store large binary objects in operating system System-dependent. Cannot
files outside the database. exceed 4 gigabytes (GB).

BLOB Used to store large binary objects in the database. 8 to 128 terabytes (TB)

CLOB Used to store large blocks of character data in the 8 to 128 TB
database.

NCLOB Used to store large blocks of NCHAR data in the 8 to 128 TB
database.

PL/SQL User-Defined Subtypes

A subtype is a subset of another data type, which is called its base type. A subtype has the same valid operations as its
base type, but only a subset of its valid values.

PL/SQL predefines several subtypes in package STANDARD. For example, PL/SQL predefines the subtypes
CHARACTER and INTEGER as follows:

SUBTYPE CHARACTER IS CHAR;
SUBTYPE INTEGER IS NUMBER(38,0);

You can define and use your own subtypes. The following program illustrates defining and using a user-defined
subtype:

DECLARE
SUBTYPE name IS char(20);
SUBTYPE message IS varchar2(100);
salutation name;
greetings message;
BEGIN
salutation := 'Reader ';
greetings := 'Welcome to the World of PL/SQL';
dbms_output.put_line('Hello ' || salutation || greetings);
END;
/

When the above code is executed at SQL prompt, it produces following result:

Hello Reader Welcome to the World of PL/SQL


NULLs in PL/SQL

PL/SQL NULL values represent missing or unknown data and they are not an integer, a character, or any other specific
data type. Note that NULL is not the same as an empty data string or the null character value '0'. A null can be
assigned but it cannot be equated with anything, including itself.

PL/SQL - VARIABLES
The name of a PL/SQL variable consist of a letter optionally followed by more letters, numerals, dollar signs,
underscores, and number signs and should not exceed 30 characters. By default, variable names are not case-sensitive.
You cannot use a reserved PL/SQL keywords as a variable name.

Variable Declaration in PL/SQL

PL/SQL variables must be declared in the declaration section or in a package as a global variable. When you declare a
variable, PL/SQL allocates memory for the variable's value and the storage location is identified by the variable name.

The syntax for declaring a variable is:

variable_name [CONSTANT] datatype [NOT NULL] [:= | DEFAULT initial_value]

Where, variable_name is a valid identifier in PL/SQL, datatype must be a valid PL/SQL data type or any user defined
data type which we already have discussed in last chapter. Some valid variable declarations along with their definition
are shown below:

sales number(10, 2);
pi CONSTANT double precision := 3.1415;
name varchar2(25);
address varchar2(100);

When you provide a size, scale or precision limit with the data type, it is called a constrained declaration. Constrained
declarations require less memory than unconstrained declarations, For example:

sales number(10, 2);
name varchar2(25);
address varchar2(100);

Initializing Variables in PL/SQL

Whenever you declare a variable, PL/SQL assigns it a default value of NULL. If you want to initialize a variable with
a value other than the NULL value, you can do so during the declaration, using either of the following:

The DEFAULT keyword

The assignment operator

For example:

counter binary_integer := 0;
greetings varchar2(20) DEFAULT 'Have a Good Day';

You can also specify that a variable should not have a NULL value using the NOT NULL constraint. If you use the
NOT NULL constraint, you must explicitly assign an initial value for that variable.

It is a good programming practice to initialize variables properly otherwise, sometime program would produce
unexpected result. Try following example which makes use of various types of variables:

DECLARE
a integer := 10;
b integer := 20;
c integer;
f real;
BEGIN
c := a + b;
dbms_output.put_line('Value of c: ' || c);
f := 70.0/3.0;
dbms_output.put_line('Value of f: ' || f);
END;
/

When the above code is executed, it produces following result:

Value of c: 30
Value of f: 23.333333333333333333


Variable Scope in PL/SQL

PL/SQL allows the nesting of Blocks i.e., each program block may contain another inner block. If a variable is declared
within an inner block, it is not accessible to the outer block. However, if a variable is declared and accessible to an outer

Block, it is also accessible to all nested inner Blocks. There are two types of variable scope:

Local variables - variables declared in an inner block and not accessible to outer blocks.

Global variables - variables declared in the outermost block or a package.

Following example shows the usage of Local and Global variables in its simple form:

DECLARE
-- Global variables
num1 number := 95;
num2 number := 85;
BEGIN
dbms_output.put_line('Outer Variable num1: ' || num1);
dbms_output.put_line('Outer Variable num2: ' || num2);
DECLARE
-- Local variables
num1 number := 195;
num2 number := 185;
BEGIN
dbms_output.put_line('Inner Variable num1: ' || num1);
dbms_output.put_line('Inner Variable num2: ' || num2);
END;
END;
/

When the above code is executed, it produces following result:

Outer Variable num1: 95
Outer Variable num2: 85
Inner Variable num1: 195
Inner Variable num2: 185


PL/SQL - CONSTANTS AND LITERALS
A constant holds a value that once declared, does not change in the program. A constant declaration specifies its name,
data type, and value, and allocates storage for it. The declaration can also impose the NOT NULL constraint.

Declaring a Constant

A constant is declared using the CONSTANT keyword. It requires an initial value and does not allow that value to be
changed, For example:

PI CONSTANT NUMBER := 3.141592654;

DECLARE
-- constant declaration
pi constant number := 3.141592654;
-- other declarations
radius number(5,2);
dia number(5,2);
circumference number(7, 2);
area number (10, 2);
BEGIN
-- processing
radius := 9.5;
dia := radius * 2;
circumference := 2.0 * pi * radius;
area := pi * radius * radius;
-- output
dbms_output.put_line('Radius: ' || radius);
dbms_output.put_line('Diameter: ' || dia);

dbms_output.put_line('Circumference: ' || circumference);
dbms_output.put_line('Area: ' || area);
END;
/

When the above code is executed at SQL prompt, it produces the following result:

Radius: 9.5
Diameter: 19
Circumference: 59.69
Area: 283.53

Pl/SQL procedure successfully completed.

The PL/SQL Literals

A literal is an explicit numeric, character, string, or Boolean value not represented by an identifier. For example,
TRUE, 786, NULL, 'tutorialspoint' are all literals of type Boolean, number, or string. PL/SQL, literals are case-
sensitive. PL/SQL supports the following kinds of literals:

Numeric Literals

Character Literals

String Literals

BOOLEAN Literals

Date and Time Literals

The following table provides examples from all these categories of literal values.

Literal Type Example:

Numeric Literals 050 78 -14 0 +32767
6.6667 0.0 -12.0 3.14159 +7800.00
6E5 1.0E-8 3.14159e0 -1E38 -9.5e-3

Character Literals 'A' '%' '9' ' ' 'z' '('

String Literals 'Hello, world!'
'Tutorials Point'
'19-NOV-12'

BOOLEAN Literals TRUE, FALSE, and NULL.

Date and Time Literals DATE '1978-12-25';
TIMESTAMP '2012-10-29 12:01:01';

To embed single quotes within a string literal, place two single quotes next to each other as shown below:

DECLARE
message varchar2(20):= ''That''s tutorialspoint.com!'';
BEGIN
dbms_output.put_line(message);
END;
/


That's tutorialspoint.com!


PL/SQL - OPERATORS
An operator is a symbol that tells the compiler to perform specific mathematical or logical manipulations. PL/SQL
language is rich in built-in operators and provides following type of operators:

Arithmetic operators

Relational operators

Comparison operators

Logical operators

String operators

This tutorial will explain the arithmetic, relational, comparison and logical operators one by one. The String operators
will be discussed under the chapter: PL/SQL - Strings.

Arithmetic Operators

Following table shows all the arithmetic operators supported by PL/SQL. Assume variable A holds 10 and variable B
holds 5 then:

Operator Description Example

+ Adds two operands A + B will give 15

- Subtracts second operand from the first A - B will give 5

* Multiply both operands A * B will give 50

/ Divide numerator by de-numerator A / B will give 2

** Exponentiation operator, raises one operand to the power of A ** B will give 100000
other

Relational Operators

Relational operators compare two expressions or values and return a Boolean result. Following table shows all the
relational operators supported by PL/SQL. Assume variable A holds 10 and variable B holds 20 then:


= Checks if the value of two operands is equal or not, if yes then (A = B) is not true.
condition becomes true.

!= Checks if the value of two operands is equal or not, if values (A != B) is true.
<> are not equal then condition becomes true.

~=

> Checks if the value of left operand is greater than the value of (A > B) is not true.
right operand, if yes then condition becomes true.

< Checks if the value of left operand is less than the value of (A < B) is true.
right operand, if yes then condition becomes true.

>= Checks if the value of left operand is greater than or equal to (A >= B) is not true.
the value of right operand, if yes then condition becomes true.

<= Checks if the value of left operand is less than or equal to the (A <= B) is true.
value of right operand, if yes then condition becomes true.

Comparison Operators

Comparison operators are used for comparing one expression to another. The result is always either TRUE, FALSE, OR
NULL.


LIKE The LIKE operator compares a character, string, or CLOB If 'Zara Ali' like 'Z% A_i' returns
value to a pattern and returns TRUE if the value matches the a Boolean true, whereas, 'Nuha Ali'
pattern and FALSE if it does not. like 'Z% A_i' returns a Boolean
false.

BETWEEN The BETWEEN operator tests whether a value lies in a If x = 10 then, x between 5 and 20
specified range. x BETWEEN a AND b means that x >= a returns true, x between 5 and 10
and x <= b. returns true, but x between 11 and
20 returns false.

IN The IN operator tests set membership. x IN (set) means that x If x = 'm' then, x in ('a', 'b', 'c')
is equal to any member of set. returns boolean false but x in ('m',
'n', 'o') returns Boolean true.

IS NULL The IS NULL operator returns the BOOLEAN value TRUE if If x = 'm', then 'x is null' returns
its operand is NULL or FALSE if it is not NULL. Boolean false.
Comparisons involving NULL values always yield NULL.

Logical Operators

Following table shows the Logical operators supported by PL/SQL. All these operators work on Boolean operands and
produces Boolean results. Assume variable A holds true and variable B holds false then:


and Called logical AND operator. If both the operands are true (A and B) is false.
then condition becomes true.

or Called logical OR Operator. If any of the two operands is true (A or B) is true.
then condition becomes true.

not Called logical NOT Operator. Used to reverse the logical state not (A and B) is true.
of its operand. If a condition is true then Logical NOT
operator will make it false.

PL/SQL Operator Precedence

Operator precedence determines the grouping of terms in an expression. This affects how an expression is evaluated.
Certain operators have higher precedence than others; for example, the multiplication operator has higher precedence
than the addition operator:

For example x = 7 + 3 * 2; Here x is assigned 13, not 20 because operator * has higher precedence than + so it first get
multiplied with 3*2 and then adds into 7.

Here operators with the highest precedence appear at the top of the table, those with the lowest appear at the bottom.
Within an expression, higher precedence operators will be evaluated first.

Operator Operation

** exponentiation

+, - identity, negation

*, / multiplication, division

+, -, || addition, subtraction, concatenation

=, <, >, <=, >=, <>, !=, ~=, ^=, comparison
IS NULL, LIKE, BETWEEN, IN

NOT logical negation

AND conjunction

OR inclusion

PL/SQL - CONDITIONS
Decision making structures require that the programmer specify one or more conditions to be evaluated or tested by the
program, along with a statement or statements to be executed if the condition is determined to be true, and optionally,
other statements to be executed if the condition is determined to be false.

IF-THEN STATEMENT
It is the simplest form of IF control statement, frequently used in decision making and changing the control flow of the
program execution.

The IF statement associates a condition with a sequence of statements enclosed by the keywords THEN and END IF.
If the condition is TRUE, the statements get executed and if the condition is FALSE or NULL then the IF statement
does nothing.

Syntax:

Syntax for IF-THEN statement is:

IF condition THEN
S;
END IF;

Where condition is a Boolean or relational condition and S is a simple or compound statement. Example of an IF-
THEN statement is:

IF (a <= 20) THEN
c:= c+1;
END IF;

If the boolean expression condition evaluates to true then the block of code inside the if statement will be executed. If
boolean expression evaluates to false then the first set of code after the end of the if statement (after the closing end if)
will be executed.

Flow Diagram:

IF-THEN-ELSE STATEMENT
A sequence of IF-THEN statements can be followed by an optional sequence of ELSE statements, which executes when
the condition is FALSE.

Syntax:

Syntax for the IF-THEN-ELSE statement is:

IF condition THEN
S1;
ELSE
S2;
END IF;

Where, S1 and S2 are different sequence of statements. In the IF-THEN-ELSE statements, when the test condition is
TRUE, the statement S1 is executed and S2 is skipped; when the test condition is FALSE, then S1 is bypassed and
statement S2 is executed, For example,

IF color = red THEN
dbms_output.put_line('You have chosen a red car')
ELSE
dbms_output.put_line('Please choose a color for your car');
END IF;

If the boolean expression condition evaluates to true then the if-then block of code will be executed otherwise the else
block of code will be executed.

Flow Diagram:

IF-THEN-ELSIF STATEMENT
The IF-THEN-ELSIF statement allows you to choose between several alternatives. An IF-THEN statement can be
followed by an optional ELSIF...ELSE statement. The ELSIF clause lets you add additional conditions.

When using IF-THEN-ELSIF statements there are few points to keep in mind.

Its ELSIF not ELSEIF

An IF-THEN statement can have zero or one ELSE's and it must come after any ELSEIF's.

An IF-THEN statement can have zero to many ELSIF's and they must come before the ELSE.

Once an ELSIF succeeds, none of the remaining ELSIF's or ELSE's will be tested.

Syntax:

The syntax of an IF-THEN-ELSIF Statement in PL/SQL programming language is:

IF(boolean_expression 1)THEN
S1; -- Executes when the boolean expression 1 is true
ELSIF( boolean_expression 2) THEN
ELSIF( boolean_expression 3) THEN
ELSE
S4; -- executes when the none of the above condition is true
END IF;

CASE STATEMENT

Like the IF statement, the CASE statement selects one sequence of statements to execute. However, to select the
sequence, the CASE statement uses a selector rather than multiple Boolean expressions. A selector is an expression
whose value is used to select one of several alternatives.

Syntax:

The syntax for case statement in PL/SQL is:

CASE selector
WHEN 'value1' THEN S1;
...
ELSE Sn; -- default case
END CASE;

Flow Diagram:

SEARCHED CASE STATEMENT
The searched CASE statement has no selector, and it's WHEN clauses contain search conditions that give Boolean
values.

Syntax:

The syntax for searched case statement in PL/SQL is:

CASE
WHEN selector = 'value1' THEN S1;

...
ELSE Sn; -- default case
END CASE;

Flow Diagram:

NESTED IF-THEN-ELSE STATEMENTS

It is always legal in PL/SQL programming to nest IF-ELSE statements, which means you can use one IF or ELSE IF
statement inside another IF or ELSE IF statement(s).

Syntax:

IF( boolean_expression 1)THEN
-- executes when the boolean expression 1 is true
IF(boolean_expression 2) THEN
-- executes when the boolean expression 2 is true
sequence-of-statements;
END IF;
ELSE
-- executes when the boolean expression 1 is not true
else-statements;
END IF;

PL/SQL - LOOPS
There may be a situation when you need to execute a block of code several number of times. In general statements are
executed sequentially: The first statement in a function is executed first, followed by the second, and so on.

Programming languages provide various control structures that allow for more complicated execution paths.

A loop statement allows us to execute a statement or group of statements multiple times and following is the general
from of a loop statement in most of the programming languages:

BASIC LOOP STATEMENT
Basic loop structure encloses sequence of statements in between the LOOP and END LOOP statements. With each
iteration, the sequence of statements is executed and then control resumes at the top of the loop.

Syntax:

The syntax of a basic loop in PL/SQL programming language is:

LOOP
Sequence of statements;
END LOOP;

Here sequence of statement(s) may be a single statement or a block of statements. An EXIT statement or an EXIT
WHEN statement is required to break the loop.

WHILE LOOP STATEMENT
A WHILE LOOP statement in PL/SQL programming language repeatedly executes a target statement as long as a
given condition is true.

Syntax:

WHILE condition LOOP
sequence_of_statements
END LOOP;

FOR LOOP STATEMENT
A FOR LOOP is a repetition control structure that allows you to efficiently write a loop that needs to execute a
specific number of times.

Syntax:

FOR counter IN initial_value .. final_value LOOP
sequence_of_statements;
END LOOP;

Following are some special characteristics of PL/SQL for loop:

The initial_value and final_value of the loop variable or counter can be literals, variables, or expressions but
must evaluate to numbers. Otherwise, PL/SQL raises the predefined exception VALUE_ERROR.

The initial_value need not to be 1; however, the loop counter increment (or decrement) must be 1.

PL/SQL allows determine the loop range dynamically at run time.

NESTED LOOPS
PL/SQL allows using one loop inside another loop. Following section shows few examples to illustrate the concept.

The syntax for a nested basic LOOP statement in PL/SQL is as follows:

LOOP
Sequence of statements1
LOOP
Sequence of statements2
END LOOP;
END LOOP;

The syntax for a nested FOR LOOP statement in PL/SQL is as follows:

FOR counter1 IN initial_value1 .. final_value1 LOOP
sequence_of_statements1
FOR counter2 IN initial_value2 .. final_value2 LOOP
END LOOP;
END LOOP;

The syntax for a nested WHILE LOOP statement in Pascal is as follows:

WHILE condition1 LOOP
WHILE condition2 LOOP
END LOOP;
END LOOP;

EXIT STATEMENT
The EXIT statement in PL/SQL programming language has following two usages:

When the EXIT statement is encountered inside a loop, the loop is immediately terminated and program control
resumes at the next statement following the loop.

If you are using nested loops (i.e. one loop inside another loop), the EXIT statement will stop the execution of
the innermost loop and start executing the next line of code after the block.

Syntax:

The syntax for a EXIT statement in PL/SQL is as follows:

EXIT;

Flow Diagram:

CONTINUE STATEMENT
The CONTINUE statement causes the loop to skip the remainder of its body and immediately retest its condition prior
to reiterating. In other words, it forces the next iteration of the loop to take place, skipping any code in between.

Syntax:

The syntax for a CONTINUE statement is as follows:

CONTINUE;

Flow Diagram:

GOTO STATEMENT

A GOTO statement in PL/SQL programming language provides an unconditional jump from the GOTO to a labeled
statement in the same subprogram.

NOTE: Use of GOTO statement is highly discouraged in any programming language because it makes difficult to trace
the control flow of a program, making the program hard to understand and hard to modify. Any program that uses a
GOTO can be rewritten so that it doesn't need the GOTO.

Syntax:

The syntax for a GOTO statement in PL/SQL is as follows:

GOTO label;
..
..
<< label >>
statement;

Flow Diagram:

PL/SQL - STRINGS
The string in PL/SQL is actually a sequence of characters with an optional size specification. The characters could be
numeric, letters, blank, special characters or a combination of all. PL/SQL offers three kinds of strings:

Fixed-length strings: In such strings, programmers specify the length while declaring the string. The string is
right-padded with spaces to the length so specified.

Variable-length strings: In such strings, a maximum length upto 32,767, for the string is specified and no
padding takes place.

Character large objects (CLOBs): These are variable-length strings that can be up to 128 terabytes.

PL/SQL strings could be either variables or literals. A string literal is enclosed within quotation marks. For example,

'This is a string literal.' Or 'hello world'

To include a single quote inside a string literal, you need to type two single quotes next to one another, like:

'this isn''t what it looks like'

Declaring String Variables

Oracle database provides numerous string datatypes , like, CHAR, NCHAR, VARCHAR2, NVARCHAR2, CLOB, and
NCLOB. The datatypes prefixed with an 'N' are 'national character set' datatypes, that store Unicode character data.

If you need to declare a variable-length string, you must provide the maximum length of that string. For example, the
VARCHAR2 data type. The following example illustrates declaring and using some string variables:

DECLARE
name varchar2(20);
company varchar2(30);
introduction clob;
choice char(1);
BEGIN
name := 'John Smith';
company := 'Infotech';
introduction := ' Hello! I''m John Smith from Infotech.';
choice := 'y';
IF choice = 'y' THEN
dbms_output.put_line(name);
dbms_output.put_line(company);
dbms_output.put_line(introduction);
END IF;
END;
/


John Smith
Infotech Corporation
Hello! I'm John Smith from Infotech.

PL/SQL procedure successfully completed

To declare a fixed-length string, use the CHAR datatype. Here you do not have to specify a maximum length for a
fixed-length variable. If you leave off the length constraint, Oracle Database automatically uses a maximum length
required. So following two declarations below are identical:

red_flag CHAR(1) := 'Y';
red_flag CHAR := 'Y';

PL/SQL - ARRAYS
PL/SQL programming language provides a data structure called the VARRAY, which can store a fixed-size sequential
collection of elements of the same type. A varray is used to store an ordered collection of data, but it is often more
useful to think of an array as a collection of variables of the same type.

All varrays consist of contiguous memory locations. The lowest address corresponds to the first element and the highest
address to the last element.

An array is a part of collection type data and it stands for variable-size arrays. We will study other collection types in a
later chapter 'PL/SQL Collections'.

Each element in a varray has an index associated with it. It also has a maximum size that can be changed dynamically.

Creating a Varray Type

A varray type is created with the CREATE TYPE statement. You must specify the maximum size and the type of
elements stored in the varray.

The basic syntax for creating a VRRAY type at the schema level is:

CREATE OR REPLACE TYPE varray_type_name IS VARRAY(n) of <element_type>

Where,

varray_type_name is a valid attribute name,

n is the number of elements (maximum) in the varray,

element_type is the data type of the elements of the array.

Maximum size of a varray can be changed using the ALTER TYPE statement.

For example,

CREATE Or REPLACE TYPE namearray AS VARRAY(3) OF VARCHAR2(10);
/

Type created.

The basic syntax for creating a VRRAY type within a PL/SQL block is:

TYPE varray_type_name IS VARRAY(n) of <element_type>

For example:

TYPE namearray IS VARRAY(5) OF VARCHAR2(10);
Type grades IS VARRAY(5) OF INTEGER;

PL/SQL - PROCEDURES

A subprogram is a program unit/module that performs a particular task. These subprograms are combined to form
larger programs. This is basically called the 'Modular design'. A subprogram can be invoked by another subprogram or
program, which is called the calling program.

A subprogram can be created:

At schema level

Inside a package

Inside a PL/SQL block

A schema level subprogram is a standalone subprogram. It is created with the CREATE PROCEDURE or CREATE
FUNCTION statement. It is stored in the database and can be deleted with the DROP PROCEDURE or DROP
FUNCTION statement.

A subprogram created inside a package is a packaged subprogram. It is stored in the database and can be deleted only
when the package is deleted with the DROP PACKAGE statement. We will discuss packages in the chapter 'PL/SQL -
Packages'.

PL/SQL subprograms are named PL/SQL blocks that can be invoked with a set of parameters. PL/SQL provides two
kinds of subprograms:

Functions: these subprograms return a single value, mainly used to compute and return a value.

Procedures: these subprograms do not return a value directly, mainly used to perform an action.

This chapter is going to cover important aspects of a PL/SQL procedure and we will cover PL/SQL function in next
chapter.

Parts of a PL/SQL Subprogram

Each PL/SQL subprogram has a name, and may have a parameter list. Like anonymous PL/SQL blocks and, the named
blocks a subprograms will also have following three parts:

S.N. Parts & Description

1 Declarative Part
It is an optional part. However, the declarative part for a subprogram does not start with the DECLARE
keyword. It contains declarations of types, cursors, constants, variables, exceptions, and nested subprograms.
These items are local to the subprogram and cease to exist when the subprogram completes execution.

2 Executable Part
This is a mandatory part and contains statements that perform the designated action.

3 Exception-handling
This is again an optional part. It contains the code that handles run-time errors.

Creating a Procedure

A procedure is created with the CREATE OR REPLACE PROCEDURE statement. The simplified syntax for the
CREATE OR REPLACE PROCEDURE statement is as follows:

CREATE [OR REPLACE] PROCEDURE procedure_name
[(parameter_name [IN | OUT | IN OUT] type [, ...])]
{IS | AS}
BEGIN
< procedure_body >
END procedure_name;

Where,

procedure-name specifies the name of the procedure.

[OR REPLACE] option allows modifying an existing procedure.

The optional parameter list contains name, mode and types of the parameters. IN represents that value will be
passed from outside and OUT represents that this parameter will be used to return a value outside of the
procedure.

procedure-body contains the executable part.

The AS keyword is used instead of the IS keyword for creating a standalone procedure.

PL/SQL - FUNCTIONS
A PL/SQL function is same as a procedure except that it returns a value.

Creating a Function

A standalone function is created using the CREATE FUNCTION statement. The simplified syntax for the CREATE OR
REPLACE PROCEDURE statement is as follows:

CREATE [OR REPLACE] FUNCTION function_name
[(parameter_name [IN | OUT | IN OUT] type [, ...])]
RETURN return_datatype
{IS | AS}
BEGIN
< function_body >
END [function_name];

Where,

function-name specifies the name of the function.

[OR REPLACE] option allows modifying an existing function.

The optional parameter list contains name, mode and types of the parameters. IN represents that value will be
passed from outside and OUT represents that this parameter will be used to return a value outside of the
procedure.

RETURN clause specifies that data type you are going to return from the function.

function-body contains the executable part.

function-body must contain a RETURN statement.

The AS keyword is used instead of the IS keyword for creating a standalone function.

PL/SQL - CURSORS
Oracle creates a memory area, known as context area, for processing an SQL statement, which contains all information
needed for processing the statement, for example, number of rows processed etc.

A cursor is a pointer to this context area. PL/SQL controls the context area through a cursor. A cursor holds the rows
(one or more) returned by a SQL statement. The set of rows the cursor holds is referred to as the active set.

You can name a cursor so that it could be referred to in a program to fetch and process the rows returned by the SQL
statement, one at a time. There are two types of cursors:

Implicit cursors

Explicit cursors

Implicit Cursors

Implicit cursors are automatically created by Oracle whenever an SQL statement is executed, when there is no explicit
cursor for the statement. Programmers cannot control the implicit cursors and the information in it.

Whenever a DML statement (INSERT, UPDATE and DELETE) is issued, an implicit cursor is associated with this
statement. For INSERT operations, the cursor holds the data that need to be inserted. For UPDATE and DELETE
operations, the cursor identifies the rows that would be affected.

In PL/SQL, you can refer to the most recent implicit cursor as the SQL cursor, which always has the attributes like
%FOUND, %ISOPEN, %NOTFOUND, and %ROWCOUNT. The SQL cursor has additional attributes,
%BULK_ROWCOUNT and %BULK_EXCEPTIONS, designed for use with the FORALL statement.

Explicit Cursors

Explicit cursors are programmer defined cursors for gaining more control over the context area. An explicit cursor
should be defined in the declaration section of the PL/SQL Block. It is created on a SELECT Statement which returns
more than one row.

The syntax for creating an explicit cursor is :

CURSOR cursor_name IS select_statement;

Working with an explicit cursor involves four steps:

Declaring the cursor for initializing in the memory

Opening the cursor for allocating memory

Fetching the cursor for retrieving data

Closing the cursor to release allocated memory

Declaring the Cursor

Declaring the cursor defines the cursor with a name and the associated SELECT statement. For example:

CURSOR c_customers IS
SELECT id, name, address FROM customers;

Opening the Cursor

Opening the cursor allocates memory for the cursor, and makes it ready for fetching the rows returned by the SQL
statement into it. For example, we will open above defined cursor as follows:

OPEN c_customers;

Fetching the Cursor

Fetching the cursor involves accessing one row at a time. For example we will fetch rows from the above opend cursor
as follows:

FETCH c_customers INTO c_id, c_name, c_addr;

Closing the Cursor

Closing the cursor means releasing the allocated memory. For example, we will close above opened cursor as follows:

CLOSE c_customers;

Example:

Following is a complete example to illustrate the concepts of explicit curosrs:

DECLARE
c_id customers.id%type;
c_name customers.name%type;
c_addr customers.address%type;
CURSOR c_customers is
SELECT id, name, address FROM customers;
BEGIN
OPEN c_customers;
LOOP
FETCH c_customers into c_id, c_name, c_addr;
dbms_output.put_line(c_id || ' ' || c_name || ' ' || c_addr);
EXIT WHEN c_customers%notfound;
END LOOP;
CLOSE c_customers;
END;
/


1 Ramesh Ahmedabad
2 Khilan Delhi
3 kaushik Kota
4 Chaitali Mumbai
5 Hardik Bhopal
6 Komal MP


PL/SQL - RECORDS

A PL/SQL record is a data structure that can hold data items of different kinds. Records consist of different fields,
similar to a row of a database table.

PL/SQL can handle following types of records:

Table-based

Cursor-based records

User-defined records

Table-Based Records

The %ROWTYPE attribute enables a programmer to create table-based and cursor-based records.

The following example would illustrate the concept of table-based records. We will be using the CUSTOMERS table
we had created and used in the previous chapters:

DECLARE
customer_rec customers%rowtype;

BEGIN
SELECT * into customer_rec
FROM customers
WHERE id = 5;

dbms_output.put_line('Customer ID: ' || customer_rec.id);
dbms_output.put_line('Customer Name: ' || customer_rec.name);
dbms_output.put_line('Customer Address: ' || customer_rec.address);
dbms_output.put_line('Customer Salary: ' || customer_rec.salary);
END;
/


Customer ID: 5
Customer Name: Hardik
Customer Address: Bhopal
Customer Salary: 9000


Cursor-Based Records

The following example would illustrate the concept of cursor-based records. We will be using the CUSTOMERS table
we had created and used in the previous chapters:

DECLARE
CURSOR customer_cur is
SELECT id, name, address
FROM customers;
customer_rec customer_cur%rowtype;
BEGIN
OPEN customer_cur;
LOOP
FETCH customer_cur into customer_rec;
EXIT WHEN customer_cur%notfound;
DBMS_OUTPUT.put_line(customer_rec.id || ' ' || customer_rec.name);
END LOOP;
END;
/


1 Ramesh
2 Khilan
3 kaushik
4 Chaitali
5 Hardik
6 Komal


User-Defined Records

PL/SQL provides a user-defined record type that allows you to define different record structures. Records consist of
different fields. Suppose you want to keep track of your books in a library. You might want to track the following
attributes about each book:

Title

Author

Subject

Book ID

Defining a Record

The record type is defined as:

TYPE
type_name IS RECORD
( field_name1 datatype1 [NOT NULL] [:= DEFAULT EXPRESSION],
field_name2 datatype2 [NOT NULL] [:= DEFAULT EXPRESSION],
...
field_nameN datatypeN [NOT NULL] [:= DEFAULT EXPRESSION);
record-name type_name;

Here is the way you would declare the Book record:

DECLARE
TYPE books IS RECORD
(title varchar(50),
author varchar(50),
subject varchar(100),
book_id number);
book1 books;
book2 books;

Accessing Fields

To access any field of a record, we use the dot (.) operator. The member access operator is coded as a period between
the record variable name and the field that we wish to access. Following is the example to explain usage of record:

DECLARE
type books is record
(title varchar(50),
author varchar(50),
subject varchar(100),
book_id number);
book1 books;
book2 books;
BEGIN
-- Book 1 specification
book1.title := 'C Programming';
book1.author := 'Nuha Ali ';
book1.subject := 'C Programming Tutorial';
book1.book_id := 6495407;

-- Book 2 specification
book2.title := 'Telecom Billing';
book2.author := 'Zara Ali';
book2.subject := 'Telecom Billing Tutorial';
book2.book_id := 6495700;

-- Print book 1 record
dbms_output.put_line('Book 1 title : '|| book1.title);
dbms_output.put_line('Book 1 author : '|| book1.author);
dbms_output.put_line('Book 1 subject : '|| book1.subject);
dbms_output.put_line('Book 1 book_id : ' || book1.book_id);

-- Print book 2 record
dbms_output.put_line('Book 2 title : '|| book2.title);
dbms_output.put_line('Book 2 author : '|| book2.author);
dbms_output.put_line('Book 2 subject : '|| book2.subject);
dbms_output.put_line('Book 2 book_id : '|| book2.book_id);
END;
/


Book 1 title : C Programming
Book 1 author : Nuha Ali
Book 1 subject : C Programming Tutorial
Book 1 book_id : 6495407
Book 2 title : Telecom Billing
Book 2 author : Zara Ali
Book 2 subject : Telecom Billing Tutorial
Book 2 book_id : 6495700


PL/SQL - EXCEPTIONS
An error condition during a program execution is called an exception in PL/SQL. PL/SQL supports programmers to
catch such conditions using EXCEPTION block in the program and an appropriate action is taken against the error
condition. There are two types of exceptions:

Systen-defined exceptions

User-defined exceptions

Syntax for Exception Handling

The General Syntax for exception handling is as follows. Here you can list down as many as exceptions you want to
handle. The default exception will be handled using WHEN others THEN :

DECLARE
<declarations section>
BEGIN
<executable command(s)>
EXCEPTION
<exception handling goes here >
WHEN exception1 THEN
exception1-handling-statements
........
WHEN others THEN
END;

Example

Let us write some simple code to illustrate the concept. We will be using the CUSTOMERS table we had created and
used in the previous chapters:

DECLARE
c_id customers.id%type := 8;
c_name customers.name%type;
c_addr customers.address%type;
BEGIN
SELECT name, address INTO c_name, c_addr
FROM customers
WHERE id = c_id;

DBMS_OUTPUT.PUT_LINE ('Name: '|| c_name);
DBMS_OUTPUT.PUT_LINE ('Address: ' || c_addr);
EXCEPTION
WHEN no_data_found THEN
dbms_output.put_line('No such customer!');
WHEN others THEN
dbms_output.put_line('Error!');

END;
/


No such customer!


The above program displays the name and address of a customer whose ID is given. Since there is no customer with ID
value 8 in our database, the program raises the run-time exception NO_DATA_FOUND which is captured in
EXCEPTION block.

PL/SQL - TRIGGERS
Triggers are stored programs, which are automatically executed or fired when some events occur. Triggers are in fact,
written to be executed in response to any of the following events:

A database manipulation (DML) statement (DELETE, INSERT, or UPDATE).

A database definition (DDL) statement (CREATE, ALTER, or DROP).

A database operation (SERVERERROR, LOGON, LOGOFF, STARTUP, or SHUTDOWN).

Triggers could be defined on the table, view, schema, or database with which the event is associated.

Creating Triggers

The Syntax for creating a trigger is:

CREATE [OR REPLACE ] TRIGGER trigger_name
{BEFORE | AFTER | INSTEAD OF }
{INSERT [OR] | UPDATE [OR] | DELETE}
[OF col_name]
ON table_name
[REFERENCING OLD AS o NEW AS n]
[FOR EACH ROW]
WHEN (condition)
DECLARE
Declaration-statements
BEGIN
Executable-statements
EXCEPTION
Exception-handling-statements
END;

Where,

CREATE [OR REPLACE] TRIGGER trigger_name : Creates or replace an existing trigger with the
trigger_name.

{BEFORE | AFTER | INSTEAD OF} : This specifies when the trigger would be executed. The INSTEAD OF
clause is used for creating trigger on a view.

{INSERT [OR] | UPDATE [OR] | DELETE}: This specifies the DML operation.

[OF col_name]: This specifies the column name that would be updated.

[ON table_name]: This specifies the name of the table associated with the trigger.

[REFERENCING OLD AS o NEW AS n]: This allows you to refer new and old values for various DML

statements, like INSERT, UPDATE, and DELETE.

[FOR EACH ROW]: This specifies a row level trigger, i.e., the trigger would be executed for each row being
affected. Otherwise the trigger will execute just once when the SQL statement is executed, which is called a table
level trigger.

WHEN (condition): This provides a condition for rows for which the trigger would fire. This clause is valid
only for row level triggers.

Example:

To start with, we will be using the CUSTOMERS table:

Select * from customers;

+----+----------+-----+-----------+----------+
| ID | NAME | AGE | ADDRESS | SALARY |
+----+----------+-----+-----------+----------+
| 1 | Ramesh | 32 | Ahmedabad | 2000.00 |
| 2 | Khilan | 25 | Delhi | 1500.00 |
| 3 | kaushik | 23 | Kota | 2000.00 |
| 4 | Chaitali | 25 | Mumbai | 6500.00 |
| 5 | Hardik | 27 | Bhopal | 8500.00 |
| 6 | Komal | 22 | MP | 4500.00 |
+----+----------+-----+-----------+----------+

The following program creates a row level trigger for the customers table that would fire for INSERT or UPDATE or
DELETE operations performed on the CUSTOMERS table. This trigger will display the salary difference between the
old values and new values:

CREATE OR REPLACE TRIGGER display_salary_changes
BEFORE DELETE OR INSERT OR UPDATE ON customers
FOR EACH ROW
WHEN (NEW.ID > 0)
DECLARE
sal_diff number;
BEGIN
sal_diff := :NEW.salary - :OLD.salary;
dbms_output.put_line('Old salary: ' || :OLD.salary);
dbms_output.put_line('New salary: ' || :NEW.salary);
dbms_output.put_line('Salary difference: ' || sal_diff);
END;
/


Trigger created.

Here following two points are important and should be noted carefully:

OLD and NEW references are not available for table level triggers, rather you can use them for record level
triggers.

If you want to query the table in the same trigger, then you should use the AFTER keyword, because triggers can
query the table or change it again only after the initial changes are applied and the table is back in a consistent
state.

Above trigger has been written in such a way that it will fire before any DELETE or INSERT or UPDATE
operation on the table, but you can write your trigger on a single or multiple operations, for example BEFORE
DELETE, which will fire whenever a record will be deleted using DELETE operation on the table.

PL/SQL - PACKAGES
PL/SQL packages are schema objects that groups logically related PL/SQL types, variables and subprograms.

A package will have two mandatory parts:

Package specification

Package body or definition

Package Specification

The specification is the interface to the package. It just DECLARES the types, variables, constants, exceptions, cursors,
and subprograms that can be referenced from outside the package. In other words, it contains all information about the
content of the package, but excludes the code for the subprograms.

All objects placed in the specification are called public objects. Any subprogram not in the package specification but
coded in the package body is called a private object.

The following code snippet shows a package specification having a single procedure. You can have many global
variables defined and multiple procedures or functions inside a package.

CREATE PACKAGE cust_sal AS
PROCEDURE find_sal(c_id customers.id%type);
END cust_sal;
/


Package created.

Package Body

The package body has the codes for various methods declared in the package specification and other private declarations,
which are hidden from code outside the package.

The CREATE PACKAGE BODY Statement is used for creating the package body. The following code snippet shows
the package body declaration for the cust_sal package created above. I assumed that we already have CUSTOMERS
table created in our database as mentioned in PL/SQL - Variables chapter.

CREATE OR REPLACE PACKAGE BODY cust_sal AS
PROCEDURE find_sal(c_id customers.id%TYPE) IS
c_sal customers.salary%TYPE;
BEGIN
SELECT salary INTO c_sal
FROM customers
WHERE id = c_id;
dbms_output.put_line('Salary: '|| c_sal);
END find_sal;
END cust_sal;
/


Package body created.

Using the Package Elements

The package elements ( variables, procedures or functions) are accessed with the following syntax:

package_name.element_name;

Consider, we already have created above package in our database schema, the following program uses the find_sal
method of the cust_sal package:

DECLARE
code customers.id%type := &cc_id;
BEGIN
cust_sal.find_sal(code);
END;
/

When the above code is executed at SQL prompt, it prompt to enter customer ID and when you enter an ID, it displays
corresponding salary as follows:

Enter value for cc_id: 1
Salary: 3000


PL/SQL - COLLECTIONS
A collection is an ordered group of elements having the same data type. Each element is identified by a unique subscript
that represents its position in the collection.

PL/SQL provides three collection types:

Index-by tables or Associative array

Nested table

Variable-size array or Varray

Index-By Table

An index-by table (also called an associative array) is a set of key-value pairs. Each key is unique, and is used to locate
the corresponding value. The key can be either an integer or a string.

An index-by table is created using the following syntax. Here we are creating an index-by table named table_name
whose keys will be of subscript_type and associated values will be of element_type

TYPE type_name IS TABLE OF element_type [NOT NULL] INDEX BY subscript_type;

table_name type_name;

Example:

Following example how to create a table to store integer values along with names and later it prints the same list of
names.

DECLARE
TYPE salary IS TABLE OF NUMBER INDEX BY VARCHAR2(20);
salary_list salary;
name VARCHAR2(20);
BEGIN
-- adding elements to the table
salary_list('Rajnish') := 62000;

salary_list('Minakshi') := 75000;
salary_list('Martin') := 100000;
salary_list('James') := 78000;

-- printing the table
name := salary_list.FIRST;
WHILE name IS NOT null LOOP
dbms_output.put_line
('Salary of ' || name || ' is ' || TO_CHAR(salary_list(name)));
name := salary_list.NEXT(name);
END LOOP;
END;
/


Salary of Rajnish is 62000
Salary of Minakshi is 75000
Salary of Martin is 100000
Salary of James is 78000


Nested Tables

A nested table is like a one-dimensional array with an arbitrary number of elements. However, a nested table differs
from an array in the following aspects:

An array has a declared number of elements, but a nested table does not. The size of a nested table can increase
dynamically.

An array is always dense i.e., it always has consecutive subscripts. A nested array is dense initially, but it can
become sparse when elements are deleted from it.

An nested table is created using the following syntax:

TYPE type_name IS TABLE OF element_type [NOT NULL];

table_name type_name;

This declaration is similar to declaration of an index-by table, but there is no INDEX BY clause.

A nested table can be stored in a database column and so it could be used for simplifying SQL operations where you
join a single-column table with a larger table. An associative array cannot be stored in the database.

Example:

The following examples illustrate the use of nested table:

DECLARE
TYPE names_table IS TABLE OF VARCHAR2(10);
TYPE grades IS TABLE OF INTEGER;

names names_table;
marks grades;
total integer;
BEGIN
names := names_table('Kavita', 'Pritam', 'Ayan', 'Rishav', 'Aziz');
marks:= grades(98, 97, 78, 87, 92);
total := names.count;
dbms_output.put_line('Total '|| total || ' Students');
FOR i IN 1 .. total LOOP
dbms_output.put_line('Student:'||names(i)||', Marks:' || marks(i));
end loop;

END;
/


Total 5 Students
Student:Kavita, Marks:98
Student:Pritam, Marks:97
Student:Ayan, Marks:78
Student:Rishav, Marks:87
Student:Aziz, Marks:92


PL/SQL - TRANSACTIONS
A database transaction is an atomic unit of work that may consist of one or more related SQL statements. It is called
atomic because the database modifications brought about by the SQL statements that constitute a transaction can
collectively be either committed i.e. made permanent to the database or rolled back (undone) from the database.

A successfully executed SQL statement and a committed transaction are not same. Even if an SQL statement is executed
successfully, unless the transaction containing the statement is committed, it can be rolled back and all changes made by
the statement(s) can be undone.

Starting an Ending a Transaction

A transaction has a beginning and an end. A transaction starts when one of the following events take place:

The first SQL statement is performed after connecting into the database.

At each new SQL statement issued after a transaction is completed.

A transaction ends when one of the following events take place:

A COMMIT or a ROLLBACK statement is issued.

A DDL statement, like CREATE TABLE statement, is issued; because in that case a COMMIT is automatically
performed.

A DCL statement, such as a GRANT statement, is issued; because in that case a COMMIT is automatically
performed.

User disconnects from the database.

User exits from SQL*PLUS by issuing the EXIT command, a COMMIT is automatically performed.

SQL*Plus terminates abnormally, a ROLLBACK is automatically performed.

A DML statement fails; in that case a ROLLBACK is automatically performed for undoing that DML statement.

Committing a Transaction

A transaction is made permanent by issuing the SQL command COMMIT. The general syntax for the COMMIT
command is:

COMMIT;

Rolling Back Transactions

Changes made to the database without COMMIT could be undone using the ROLLBACK command.

The general syntax for the ROLLBACK command is:

ROLLBACK [TO SAVEPOINT < savepoint_name>];

When a transaction is aborted due to some unprecedented situation, like system failure, the entire transaction since a
commit is automatically rolled back. if you are not using savepoiny then simply use the following statement to rollback
all the changes:

ROLLBACK;

Savepoints

Savepoints are sort of markers that help in splitting a long transaction into smaller units by setting some checkpoints. By
setting savepoints within a long transaction, you can roll back to a checkpoint if required. This is done by issuing the
SAVEPOINT command.

The general syntax for the SAVEPOINT command is:

SAVEPOINT < savepoint_name >;

Automatic Transaction Control

To execute a COMMIT automatically whenever an INSERT, UPDATE or DELETE command is executed, you can set
the AUTOCOMMIT environment variable as:

SET AUTOCOMMIT ON;

You can turn-off auto commit mode using the following command:

SET AUTOCOMMIT OFF;

PL/SQL - DATE & TIME
PL/SQL provides two classes of date and time related data types:

Datetime data types

Interval data types

The Datetime data types are:

DATE

TIMESTAMP

TIMESTAMP WITH TIME ZONE

TIMESTAMP WITH LOCAL TIME ZONE

The Interval data types are:

INTERVAL YEAR TO MONTH

INTERVAL DAY TO SECOND

The Datetime Data Types

Following are the Datetime data types:

DATE - it stores date and time information in both character and number datatypes. It is made of information on
century, year, month, date, hour, minute, and second. It is specified as:

TIMESTAMP - it is an extension of the DATE datatype. It stores the year, month, and day of the DATE
datatype, along with hour, minute, and second values. It is useful for storing precise time values.

TIMESTAMP WITH TIME ZONE - it is a variant of TIMESTAMP that includes a time zone region name or
a time zone offset in its value. The time zone offset is the difference (in hours and minutes) between local time
and UTC. This datatype is useful for collecting and evaluating date information across geographic regions.

TIMESTAMP WITH LOCAL TIME ZONE - it is another variant of TIMESTAMP that includes a time zone
offset in its value.

Examples:

SELECT SYSDATE FROM DUAL;

Output:

08/31/2012 5:25:34 PM

SELECT TO_CHAR(CURRENT_DATE, 'DD-MM-YYYY HH:MI:SS') FROM DUAL;

Output:

31-08-2012 05:26:14

SELECT ADD_MONTHS(SYSDATE, 5) FROM DUAL;

Output:

01/31/2013 5:26:31 PM

SELECT LOCALTIMESTAMP FROM DUAL;

Output:

8/31/2012 5:26:55.347000 PM

The Interval Data Types

Following are the Interval data types:

INTERVAL YEAR TO MONTH - it stores a period of time using the YEAR and MONTH datetime fields.

INTERVAL DAY TO SECOND - it stores a period of time in terms of days, hours, minutes, and seconds.

PL/SQL - DBMS OUTPUT
The DBMS_OUTPUT is a built in package that enables you to display output, display debugging information, and send
messages from PL/SQL blocks, subprograms, packages, and triggers.

Example:

DECLARE
lines dbms_output.chararr;
num_lines number;
BEGIN
-- enable the buffer with default size 20000
dbms_output.enable;

dbms_output.put_line('Hello Reader!');
dbms_output.put_line('Hope you have enjoyed the tutorials!');
dbms_output.put_line('Have a great time exploring pl/sql!');

num_lines := 3;

dbms_output.get_lines(lines, num_lines);

FOR i IN 1..num_lines LOOP
dbms_output.put_line(lines(i));
END LOOP;
END;
/


Hello Reader!
Hope you have enjoyed the tutorials!
Have a great time exploring pl/sql!


PL/SQL - OBJECT ORIENTED
PL/SQL allows defining an object type, which helps in designing object-oriented database in Oracle. An object type
allows you to crate composite types. Using objects allow you implementing real world objects with specific structure of
data and methods for operating it. Objects have attributes and methods. Attributes are properties of an object and are
used for storing an object's state; and methods are used for modeling its behaviors.

Objects are created using the CREATE [OR REPLACE] TYPE statement. Below is an example to create a simple
address object consisting of few attributes:

CREATE OR REPLACE TYPE address AS OBJECT
(house_no varchar2(10),
street varchar2(30),
city varchar2(20),
state varchar2(10),
pincode varchar2(10)
);
/


Type created.

Let's create one more object customer where we will wrap attributs and methods together to have object oriented
feeling:

CREATE OR REPLACE TYPE customer AS OBJECT
(code number(5),
name varchar2(30),
contact_no varchar2(12),
addr address,
member procedure display

);
/


Type created.

Instantiating an Object

Defining an object type provides a blueprint for the object. To use this object, you need to create instances of this
object. You can access the attributes and methods of the object using the instance name and the access operator (.) as
follows:

DECLARE
residence address;
BEGIN
residence := address('103A', 'M.G.Road', 'Jaipur', 'Rajasthan','201301');
dbms_output.put_line('House No: '|| residence.house_no);
dbms_output.put_line('Street: '|| residence.street);
dbms_output.put_line('City: '|| residence.city);
dbms_output.put_line('State: '|| residence.state);
dbms_output.put_line('Pincode: '|| residence.pincode);
END;
/


House No: 103A
Street: M.G.Road
City: Jaipur
State: Rajasthan
Pincode: 201301


Inheritance for PL/SQL Objects:

PL/SQL allows creating object from existing base objects. To implement inheritance, the base objects should be
declared as NOT FINAL. The default is FINAL.

The following programs illustrates inheritance in PL/SQL Objects. Let us create another object named TableTop which
is inheriting from the Rectangle object. Creating the base rectangle object:

CREATE OR REPLACE TYPE rectangle AS OBJECT
(length number,
width number,
member function enlarge( inc number) return rectangle,
NOT FINAL member procedure display) NOT FINAL
/


Type created.

Creating the base type body:

CREATE OR REPLACE TYPE BODY rectangle AS
MEMBER FUNCTION enlarge(inc number) return rectangle IS
BEGIN
return rectangle(self.length + inc, self.width + inc);
END enlarge;

MEMBER PROCEDURE display IS
BEGIN
dbms_output.put_line('Length: '|| length);
dbms_output.put_line('Width: '|| width);
END display;
END;
/


Type body created.

Creating the child object tabletop:

CREATE OR REPLACE TYPE tabletop UNDER rectangle
(
material varchar2(20);
OVERRIDING member procedure display
)
/


Type created.

Creating the type body for the child object tabletop:

CREATE OR REPLACE TYPE BODY tabletop AS
OVERRIDING MEMBER PROCEDURE display IS
BEGIN
dbms_output.put_line('Length: '|| length);
dbms_output.put_line('Width: '|| width);
dbms_output.put_line('Material: '|| material);
END display;
/


Type body created.

Using the tabletop object and its member functions:

DECLARE
t1 tabletop;
t2 tabletop;
BEGIN
t1:= tabletop(20, 10, 'Wood');
t2 := tabletop(50, 30, 'Steel');
t1.display;
t2.display;
END;
/


Length: 20
Width: 10
Material: Wood
Length: 50
Width: 30
Material: Steel


Abstract Objects in PL/SQL

The NOT INSTANTIABLE clause allows you to declare an abstract object. You cannot use an abstract object as it is;
you will have to create a subtype or child type of such objects to use its functionalities.

For example,

CREATE OR REPLACE TYPE rectangle AS OBJECT
(length number,
width number,
NOT INSTANTIABLE NOT FINAL MEMBER PROCEDURE display)
NOT INSTANTIABLE NOT FINAL
/


Type created.

Plsql quick guide

More Related Content

What's hot (20)

Viewers also liked (14)

Similar to Plsql quick guide (20)

Plsql quick guide