Technical Data Sheet
                  Polyoxymethylene POM-C

 I. Physical Properties
                                                          Test method                   Unit                   Value
 1. Specific gravity (ρ)                                     ISO 1183                   g/cm³                    1,39
 2. Water absorption                                         DIN 53495                    %                       0,2
 3. Maximum permissible service temp                             -                         -                       -
   (no stronger mechanical stress involved)
                    Upper temperature limit                        -                      °C                     110
                    Lower temperature limit                        -                      °C                     -50

 II. Mechanical Properties
                                                          Test method                   Unit                   Value
 1. Tensile strength at yield                                 ISO 527                   MPa                      63
 2. Elongation at yield. (εS)                                 ISO 527                     %                      10
 3. Tensile strength at break (σR)                            ISO 527                   MPa                       -
 4. Elongation at break (εR)                                  ISO 527                     %                      31
 5. Impact strength (an)                                      ISO 179                   kJ/m2                 no break
 6. Notch impact strength (ak)                                ISO 179                   kJ/m2                    6
 7. Ball indentation / Rockwell hardness                    ISO 2039-1                  MPa                     135
 8. Shore-D                                                  DIN 53505                                           85
 9. Flexural strength (σB 3,5 %)                              ISO 178                    MPa                      -
 10. Modulus of elasticity (Et)                               ISO 527                    MPa                    2600

 III. Thermal Properties
                                                          Test method                   Unit                   Value
 1. Vicat-softening point                 VST/B/50            ISO 306                    °C                      150
                                          VST/A/50            ISO 306                    °C                        -
 2. Heat deflection temperature HDT/B                          ISO 75                    °C                      155
                                          HDT/A                ISO 75                    °C                       95
 3. Coefficient of linear thermal expansion α                DIN 53752                K-1∗10-4                    1,1
 4. Thermal conductivity at 20 °C (λ)                        DIN 52612                W/(m∗K)                    0,31

 IV. Electrical Properties
                                                          Test method                   Unit                   Value
 1. Volume resistivity                                       VDE 0303                   Ω∗cm                   ≥1013
 2. Surface resistivity (Ro)                                 VDE 0303                    Ω                     ≥1013
 3. Dielectric constant at 1MHz (εr)                         DIN 53483                    -                     3,8
 4. Dielectric loss factor at 1 MHz (tanδ)                   DIN 53483                    -                    0,005
 5. Dielectric strength                                      VDE 0303                  kV/mm                     40
 6. Tracking resistance                                      DIN 53480                    -                   CTI 600

 V. Additional Data
                                                          Test method                   Unit                   Value
 1. Bond ability                                                 -                         -                     fair
 2. Friction coefficient                                     DIN 53375                     -                     0,35
 3. Flammability                                               UL 94                       -                      HB
 4. UV stabilisation                                             -                         -                     fair

All values are attributes of the used raw materials.




The physical data contained in this table are typical values. They are obtained on test specimens under specific conditions and
represent average values of a large number of tests. The results obtained on this tests specimens cannot be applied to finished
parts without reservations, as behaviour is influenced by processing and shaping. Reproduction only with our definite permis-
sion.

Subject to change without notice.                          Page 1 of 1                                       Date: 11/04

More Related Content

PDF
Molas e coxins - Elastômeros mais usados
PPTX
Glass ceramics
PPTX
SHAPE MEMORY POLYMERS
PDF
Elastomeros etileno acrilato_metila_vamac
PPTX
An Introduction to Self healing polymers
PDF
PPTX
Manufacturing process of tiles
Molas e coxins - Elastômeros mais usados
Glass ceramics
SHAPE MEMORY POLYMERS
Elastomeros etileno acrilato_metila_vamac
An Introduction to Self healing polymers
Manufacturing process of tiles

What's hot (20)

PPTX
Short fiber reinforcements
PPTX
Magnesium and its alloys
PPTX
ALUMINIUM METAL MATRIX COMPOSITE BY STIR CASTING METHODS
PDF
6 phase and phase equilibrium chapter
PPTX
Developments in High Temperature Silicone Lubrication
PDF
08 escolha da borracha
PPTX
C 4
PPTX
Ceramic materials
PPTX
Manufacturing process of ceramic tiles
PPTX
Nickel -Titanium alloys (NiTi) PPT.pptx
PPTX
Composite materials
PPTX
FERROUS AND NON FERROUS METALS
PPTX
EFFECT OF ASH IN ALLUMINIUM HYBRID METAL MATRIX COMPOSITION
PPT
Design optimization of Sandwich Structures.
PDF
Kil ve kil mineralleri
PPT
Compression moulding
PPT
5.material selection criteria
PPTX
Aluminum forging presentation
PPTX
Glass in Materials Science
Short fiber reinforcements
Magnesium and its alloys
ALUMINIUM METAL MATRIX COMPOSITE BY STIR CASTING METHODS
6 phase and phase equilibrium chapter
Developments in High Temperature Silicone Lubrication
08 escolha da borracha
C 4
Ceramic materials
Manufacturing process of ceramic tiles
Nickel -Titanium alloys (NiTi) PPT.pptx
Composite materials
FERROUS AND NON FERROUS METALS
EFFECT OF ASH IN ALLUMINIUM HYBRID METAL MATRIX COMPOSITION
Design optimization of Sandwich Structures.
Kil ve kil mineralleri
Compression moulding
5.material selection criteria
Aluminum forging presentation
Glass in Materials Science
Ad

Similar to Pom properties data sheet _ gehr (20)

PDF
Pe uhmw properties data-sheet _ gehr
PDF
Pvc u properties data sheet _ gehr
PDF
Pvdf properties data sheet_ gehr
PDF
Polypropilene properties data sheet_ gehr
PDF
Pmma properties data sheet _ gehr
PDF
Peek virgin properties data sheet _ gehr
PDF
Peek mod properties data-sheet_ gehr
PDF
Ectfe properties data sheet _ gehr
PDF
Peek mod properties datasheet tecapeek_pvx_ensinger
PDF
Peek virgin properties datasheet tecapeek_ensinger
PDF
Pom properties data sheet_tecaform_ah__black_ensinger
PDF
Ficha Técnica - Styrolution Lustran H604
PDF
Ficha Técnica - Styrolution Lustran H702
PDF
Pmma properties data sheet_ gevacril
PDF
Ficha Técnica - Styrolution Lustran H802
PDF
Ficha Técnica - Styrolution Novodur P2M-AT
PDF
Ficha Técnica - Styrolution Lustran H950
PDF
Ficha Técnica - Styrolution Novodur P2MC
PDF
Ficha Técnica - Styrolution Novodur P2H-AT
PDF
Ficha Técnica - Styrolution Lustran E211 lNS013
Pe uhmw properties data-sheet _ gehr
Pvc u properties data sheet _ gehr
Pvdf properties data sheet_ gehr
Polypropilene properties data sheet_ gehr
Pmma properties data sheet _ gehr
Peek virgin properties data sheet _ gehr
Peek mod properties data-sheet_ gehr
Ectfe properties data sheet _ gehr
Peek mod properties datasheet tecapeek_pvx_ensinger
Peek virgin properties datasheet tecapeek_ensinger
Pom properties data sheet_tecaform_ah__black_ensinger
Ficha Técnica - Styrolution Lustran H604
Ficha Técnica - Styrolution Lustran H702
Pmma properties data sheet_ gevacril
Ficha Técnica - Styrolution Lustran H802
Ficha Técnica - Styrolution Novodur P2M-AT
Ficha Técnica - Styrolution Lustran H950
Ficha Técnica - Styrolution Novodur P2MC
Ficha Técnica - Styrolution Novodur P2H-AT
Ficha Técnica - Styrolution Lustran E211 lNS013
Ad

More from mandalika3 (20)

PDF
Pvc u sheet komadur wa kommerling
PDF
Food certpp
PDF
Guidelines for machining gehr
PDF
Guidelines for machining ensinger
PDF
Brochure plexyglas gs solid sheet (cast acrylic) evonik
PDF
Pvc u sheet komadur wa kommerling
PDF
Katalog pvc u gehr
PDF
Katalog pp gehr
PDF
Katalog pom c tecaform ensinger
PDF
Katalog pom c gehr
PDF
Katalog peek tecapeek ensinger
PDF
Katalog peek gehr
PDF
Katalog pe uhmw gehr
PDF
Katalog acrylic tube gehr
PDF
Brochure pe uhmw murdotec
PDF
Agru purad pharmaceutical and bio pharmaceuticals
PDF
Agru purad high purity piping systems pvdf uhp, pp pure, polypure, ectfe, pvd...
PDF
Agru polypure natural polypropylene piping system
PDF
Agru one stop shopping ectfe system
PDF
Agru industrial piping systems for industrial application
Pvc u sheet komadur wa kommerling
Food certpp
Guidelines for machining gehr
Guidelines for machining ensinger
Brochure plexyglas gs solid sheet (cast acrylic) evonik
Pvc u sheet komadur wa kommerling
Katalog pvc u gehr
Katalog pp gehr
Katalog pom c tecaform ensinger
Katalog pom c gehr
Katalog peek tecapeek ensinger
Katalog peek gehr
Katalog pe uhmw gehr
Katalog acrylic tube gehr
Brochure pe uhmw murdotec
Agru purad pharmaceutical and bio pharmaceuticals
Agru purad high purity piping systems pvdf uhp, pp pure, polypure, ectfe, pvd...
Agru polypure natural polypropylene piping system
Agru one stop shopping ectfe system
Agru industrial piping systems for industrial application

Pom properties data sheet _ gehr

  • 1. Technical Data Sheet Polyoxymethylene POM-C I. Physical Properties Test method Unit Value 1. Specific gravity (ρ) ISO 1183 g/cm³ 1,39 2. Water absorption DIN 53495 % 0,2 3. Maximum permissible service temp - - - (no stronger mechanical stress involved) Upper temperature limit - °C 110 Lower temperature limit - °C -50 II. Mechanical Properties Test method Unit Value 1. Tensile strength at yield ISO 527 MPa 63 2. Elongation at yield. (εS) ISO 527 % 10 3. Tensile strength at break (σR) ISO 527 MPa - 4. Elongation at break (εR) ISO 527 % 31 5. Impact strength (an) ISO 179 kJ/m2 no break 6. Notch impact strength (ak) ISO 179 kJ/m2 6 7. Ball indentation / Rockwell hardness ISO 2039-1 MPa 135 8. Shore-D DIN 53505 85 9. Flexural strength (σB 3,5 %) ISO 178 MPa - 10. Modulus of elasticity (Et) ISO 527 MPa 2600 III. Thermal Properties Test method Unit Value 1. Vicat-softening point VST/B/50 ISO 306 °C 150 VST/A/50 ISO 306 °C - 2. Heat deflection temperature HDT/B ISO 75 °C 155 HDT/A ISO 75 °C 95 3. Coefficient of linear thermal expansion α DIN 53752 K-1∗10-4 1,1 4. Thermal conductivity at 20 °C (λ) DIN 52612 W/(m∗K) 0,31 IV. Electrical Properties Test method Unit Value 1. Volume resistivity VDE 0303 Ω∗cm ≥1013 2. Surface resistivity (Ro) VDE 0303 Ω ≥1013 3. Dielectric constant at 1MHz (εr) DIN 53483 - 3,8 4. Dielectric loss factor at 1 MHz (tanδ) DIN 53483 - 0,005 5. Dielectric strength VDE 0303 kV/mm 40 6. Tracking resistance DIN 53480 - CTI 600 V. Additional Data Test method Unit Value 1. Bond ability - - fair 2. Friction coefficient DIN 53375 - 0,35 3. Flammability UL 94 - HB 4. UV stabilisation - - fair All values are attributes of the used raw materials. The physical data contained in this table are typical values. They are obtained on test specimens under specific conditions and represent average values of a large number of tests. The results obtained on this tests specimens cannot be applied to finished parts without reservations, as behaviour is influenced by processing and shaping. Reproduction only with our definite permis- sion. Subject to change without notice. Page 1 of 1 Date: 11/04