Pp Kee Anchor Web Version
0 likes293 views
This document provides information on various anchor systems produced by Kee Safety Ltd including: 1) The Weightanka, a class E deadweight anchor device for roof access that can be used for fall arrest or restraint and supports multiple users or loads. 2) The Accessanka, a portable deadweight system that works with the Weightanka to provide rope access anchor points for a single worker or rescue scenario. 3) The Class B & E portable deadweight anchor system for rope access that conforms to standards for work-positioning and fall arrest during rope access work.
Pp Kee Anchor Web Version
- 2. Class E Class E Deadweight Class B & E Deadweight Anchor System Portable Anchor Device and Class ‘C’ Deadweight Horizontal Lifeline Anchor system for to EN 795:1996 system Rope Access ISO 14567 to EN 795:1996 to EN 795:1996 2
- 3. Features For roofs up to 5 degrees pitch Suitable for wet or dry roof surface Easy and quick assembly Galvanised to BS EN ISO 1461 3
- 4. Base weights Base weights fully encased in rubber Rubber moulding means base weights aren’t prone to peeling Unique design adds to performance Reduces thermal bridging 4
- 5. Galvanised Counter weights Each counterweight weighs 25kg and incorporate carrying handles Different roof types require different Counterweight quantities 5
- 6. Placement Ensure outside of Kee Anchor product is at least 2.5m from any roof edge, open void or fall hazard. Do not position in areas where there is a risk of contamination or accumulation of water, oil, grease or algae On Gravel covered roofs, brush gravel to allow anchor bases direct contact with roof material 6
- 7. Placement Suitable Roof Types- Up to 5º Pitch Types- Concrete Asphalt Mineral Felt Stone chippings Single ply Steel membrane cladding (Smooth) 7
- 8. Limitations Use with suitable PPE Ensure roof structure is suitable, any doubts Kee Safety recommends seeking the advice of a structural engineer 8
- 9. Fall Restraint Combination of anchor position and PPE supplied ensures no user is able to reach a position of 0.5m of any roof edge, roof open or other fall hazard 9
- 10. Cleaning/Storage The assemblies should be kept clean, using detergent if necessary, by wiping or hosing down with clean water and dried. Storage should be in a dry, chemically inert environment, away from sources of damage and Store in such a way that dismantled products will not become lost or misplaced. Where the Weightanka has been left in position an optional cover is available. 10
- 11. Before installation It is strongly recommended that installers assemble and disassemble one in a place of safety, away from the worksite to familiarise themselves with the product 11
- 12. 12
- 13. Class E Deadweight Anchor Device to EN 795:1996 ISO 14567 CE Certified to PPE Directive 13
- 14. Portable, Non Penetrative, Temporary or permanent solution Ideal for Where Roof build up is unknown No Roof Alterations required Good for refurbishment projects Quick to assemble No part of the Weightanka weighs more than 25kg 14
- 15. Number Of Users Fall Arrest- Single User Arrest- Restraint- Restraint- Two Users Tell Kee Safety at time of purchasing Supplied with 2nd Eyebolt & Restraint PPE disc. 15
- 16. Number of weights 250kg (Six Galvanised weights) assembly for: Asphalt/Mastic Mineral Felt Concrete (Brushed) Stone chippings on Bitumen 300kg (Eight Galvanised weights) assembly for: Single ply membrane (Smooth) Steel cladding (Brushed) Stone chippings on Asphalt/Mastic. 16
- 17. Stack weights opposite each other vertically 17
- 18. Assembly TOOLS REQUIRED FOR ASSEMBLY: 12mm A/F Hex Allen key 18
- 19. 19
- 20. Class ‘E’ Deadweight Anchor System and Class ‘C’ Horizontal Flexible Lifeline to EN 795:1996 and BS 7883 CE Certified to PPE Directive 20
- 21. Non penetrative EN795 ‘Class C’ Wire cable system Allows users to be continuously attached Up to 15 m spans For temporary or permanent installation No need to water proof System incorporates corners Fall arrest or restraint 21
- 22. Non penetrative EN795 ‘Class C’ Wire cable system Allows users to be continuously attached Up to 15 m spans For temporary or permanent installation No need to water proof System incorporates corners Fall arrest or restraint 22
- 23. Layout options SINGLE EXTREMITY ANCHORS Fall Arrest for a single user -Or alternatively- Fall Restraint for up to 3 users (maximum 2 users in a single span) 23
- 24. Layout options DOUBLE EXTREMITY/CORNER ANCHORS Fall Arrest for 2 users in separate spans 24
- 25. Edge distances and maximum spans FALL ARREST SYSTEMS Min. Edge Distance 2.5m 2.5m 3.0m 3.0m 4.0m 4.0m Min. Free Fall Distance 5.2m 5.4m 5.8m 6.2m 6.6m 7.2m Maximum span 5m 6m 8m 10m 12m 15m FALL RESTRAINT Maximum 10 m spans Minimum edge distance of 2.5m 25
- 26. 26
- 27. Portable Deadweight System for Rope Access Conforms to BS EN 795, & ISO 14567 class B&E CE Approved to PPE Directive Single user for Roped Access applications Two users in a rescue situation 27
- 28. Separate anchor points for working line and back up line Internal force balanced system allows the assembly to remain static. Requires no attachment to structural members Easily moved across roof surface, removing need for multiple attachment points Rope lines held away from edge of building reducing risk of abrasion 28
- 29. Used with a 250kg Weightanka Assembly for any roof type Sold separately for use with existing Weightanka or as complete system Aluminium, galvanised and rubber coated parts Minimum maintenance Provides full fall arrest protection before approaching edge 29
- 30. Usage Accessanka is an accessory to Weightanka and must always be used in combination with it. This combination provides a mobile deadweight anchor device for use in rope access systems in accordance with: Industrial Rope Access Trade Association (IRATA) guidelines and/or: BS7985:2002 – Code of practice for the use of rope access methods for industrial purposes 30
- 31. More information Identification labels Assembly and operating instructions Sales Literature Sales team Technical support www.keesafety.co.uk 31
- 32. Kee Safety Ltd 1 Boulton Road Reading RG2 0NH United Kingdom Tel: +44 (0) 118 931 1022 Fax: +44 (0) 118 931 1146 Email: sales@keesafety.com www.keesafety.co.uk 32