python_computer engineering_semester_computer_language.pptx

A practical introduction to
Python

An introduction to coding with Python
An introductory coding course with Python…

Interpretive vs compiled languages
• Python is an interpretive language.
• This means that your code is not directly run by the hardware. It is
instead passed to a virtual machine, which is just another programme
that reads and interprets your code. If your code used the ‘+’ operation,
this would be recognised by the interpreter at run time, which would
then call its own internal function ‘add(a,b)’, which would then execute the
machine code ‘ADD’.
• This is in contrast to compiled languages, where your code is translated
into native machine instructions, which are then directly executed by the
hardware. Here, the ‘+’ in your code would be translated directly in the
‘ADD’ machine code.

Advantages of Python?
Because Python is an interpretive
language, it has a number of
advantages:
• Automatic memory management.
• Expressivity and syntax that is ‘English’.
• Ease of programming.
• Minimises development time.
• Python also has a focus on importing
modules, a feature that makes it useful
for scientific computing.

Disadvantages
• Interpreted languages are slower than compiled languages.
• The modules that you import are developed in a decentralised
manner; this can cause issues based upon individual assumptions.
• Multi-threading is hard in Python

Which language is the best
• No one language is
better than all others.
• The ‘best’ language
depends on the task
you are using it for and
your personal
preference.

• Introduction to Python Programming

python_computer engineering_semester_computer_language.pptx

Operators
• Python divides the operators in the following groups:
• Arithmetic operators
• Assignment operators
• Comparison operators
• Logical operators
• Identity operators
• Membership operators
• Bitwise operators

10&6
10: 00001010
6: 00000110
-------------------
00000010
10|6
10: 00001010
6: 00000110
-------------------
00001110
10^6
10: 00001010
6: 00000110
-------------------
00001100
5<<2
5: 00000101
-------------------
00010100->20
5>>2
5: 00000101
-------------------
000000011
~11
11: 00001011
-------------------
~11:11110100
12’s complement

Variables
• Variables in python can contain alphanumerical characters and some
special characters.
• By convention, it is common to have variable names that start with
lower case letters and have class names beginning with a capital
letter; but you can do whatever you want.
• Some keywords are reserved and cannot be used as variable names
due to them serving an in-built Python function; i.e. and, continue, break.
Your IDE will let you know if you try to use one of these.
• Python is dynamically typed; the type of the variable is derived from
the value it is assigned.

Variable types
• Integer (int)
• Float (float)
• String (str)
• Boolean (bool)
• Complex (complex)
• […]
• User defined (classes)
• A variable is assigned using the = operator; i.e:
In: Out:
• Create an integer, float, and string variable.
• Print these to the screen.
• Play around using different variable names,
etc.
• The print() function is used to print something
to the screen.

• You can always check the type of a variable using the type() function.
In: Out:
• Check the type of one of your variables.

• Variables can be cast to a different type.
In: Out:

Arithmetic operators
The arithmetic operators:
• Addition: +
• Subtract: -
• Multiplication: *
• Division: /
• Power: **
• Write a couple of operations
using the arithmetic operators,
and print the results to the
screen.
In: Out:

A quick note on the increment operator
shorthand
• Python has a common idiom that is not necessary, but which is used frequently and is
therefore worth noting:
x += 1
Is the same as:
x = x + 1
• This also works for other operators:
x += y # adds y to the value of x
x *= y # multiplies x by the value y
x -= y # subtracts y from x
x /= y # divides x by y

Boolean operators
• Boolean operators are useful when making conditional statements,
we will cover these in-depth later.
• and
• or
• not

Comparison operators
• Greater than: >
• Lesser than: <
• Greater than or equal to: >=
• Lesser than or equal to: <=
• Is equal to: ==
In:
Out:
• Write a couple of operations using
comparison operators; i.e.

In: Out:
Working with strings
• Create a string variable.
• Work out the length of the string.

Dictionaries
• Dictionaries are lists of key-valued pairs.
In:
Out:

Indexing
• Indexing in Python is 0-based, meaning that the first element in a
string, list, array, etc, has an index of 0. The second element then has
an index of 1, and so on.
In: Out:
• You can cycle backwards through a list, string, array, etc, by placing a
minus symbol in front of the index location.
In: Out:

In: Out:
In: Out:
• Create a string that is 10 characters in length.
• Print the second character to the screen.
• Print the third to last character to the screen.
• Print all characters after the fourth character.
• Print characters 2-8.

Tuples
• Tuples are containers that are immutable; i.e. their contents cannot
be altered once created.
In: Out:
In: Out:

Lists
• Lists are essentially containers of
arbitrary type.
• They are probably the container
that you will use most frequently.
• The elements of a list can be of
different types.
• The difference between tuples
and lists is in performance; it is
much faster to ‘grab’ an element
stored in a tuple, but lists are
much more versatile.
• Note that lists are denoted by []
and not the () used by tuples.
In:
Out:
• Create a list and populate it with
some elements.

• Lists are mutable; i.e. their contents can be changed. This can be done
in a number of ways.
• With the use of an index to replace a current element with a new one.
In: Out:
Adding elements to a list
• Replace the second element in your string with the integer 2.

• You can use the insert() function in order to add an element to a list at
a specific indexed location, without overwriting any of the original
elements.
In: Out:
• Use insert() to put the integer 3 after the 2 that you just added to your
string.

• You can add an element to the end of a list using the append() function.
In: Out:
• Use append() to add the string “end” as the last element in your list.

Removing elements from a list
• You can remove an element from a list based upon the element value.
• Remember: If there is more than one element with this value, only
the first occurrence will be removed.
In: Out:

• It is better practice to remove elements by their index using the del
function.
In: Out:
• Use del to remove the 3 that you added to the list earlier.

For loops
• The for loop is used to iterate over elements in a sequence, and is
often used when you have a piece of code that you want to repeat a
number of times.
• For loops essentially say:
“For all elements in a sequence, do something”

An example
• We have a list of species:
• The command underneath the list then cycles through each entry in the species list
and prints the animal’s name to the screen. Note: The i is quite arbitrary. You could
just as easily replace it with ‘animal’, ‘t’, or anything else.

Another example
• We can also use for loops for operations other than printing to a screen.
For example:
• Using the list you made a moment ago, use a for loop to print each
element of the list to the screen in turn.

The range() function
• The range() function generates a list of numbers, which is generally used to iterate
over within for loops.
• The range() function has two sets of parameters to follow:
range(stop)
stop: Number of integers
(whole numbers) to generate,
starting from zero. i.e:
range([start], stop[, step])
start: Starting number of the sequence.
stop: Generate numbers up to, but not including this number.
step: Difference between each number in the sequence
i.e.:
Note:
• All parameters must be integers.
• Parameters can be positive or negative.
• The range() function (and Python in general) is 0-index based, meaning list indexes start at 0, not 1. eg. The syntax to
access the first element of a list is mylist[0]. Therefore the last integer generated by range() is up to, but not including,
stop.

• Create an empty list.
• Use the range() and append() functions to add the integers 1-20 to
the empty list.
• Print the list to the screen, what do you have?
Output:

The break() function
• To terminate a loop, you can use the break() function.
• The break() statement breaks out of the innermost enclosing for or while
loop.

• The continue() statement is used to tell Python to skip the rest of the
statements in the current loop block, and then to continue to the next
iteration of the loop.
The continue () function

While loops
• The while loop tells the computer to do something as long as a specific
condition is met.
• It essentially says:
“while this is true, do this.”
• When working with while loops, its important to remember the nature of
various operators.
• While loops use the break() and continue() functions in the same way as a for
loop does.

• Create a variable and set it to zero.
• Write a while loop that states that, while the variable is less than 250,
add 1 to the variable and print the variable to the screen.
• Replace the < with <=, what happens?
In: Out:

For loop vs. while loop
• You will use for loops more often than while loops.
• The for loop is the natural choice for cycling through a list, characters
in a string, etc; basically, anything of determinate size.
• The while loop is the natural choice if you are cycling through
something, such as a sequence of numbers, an indeterminate number
of times until some condition is met.

Nested loops
• In some situations, you may want a loop within a loop; this is known
as a nested loop.
In:
Out:
• What will the code on the right
produce?
• Recreate this code and run it, what do
you get?

Conditionals
• There are three main conditional statements in Python; if, else, elif.
• We have already used if when looking at while loops.
In: Out:
In: Out:

Functions
• A function is a block of code which
only runs when it is called.
• They are really useful if you have
operations that need to be done
repeatedly; i.e. calculations.
• The function must be defined
before it is called. In other words,
the block of code that makes up
the function must come before the
block of code that makes use of
the function.
In:
Out:

In:
Out:
• Create a function that takes two inputs, multiplies them, and then returns the result. It should look
some like:
def function_name(a, b):
do something
return something
• Create two different lists of integers.
• Using your function, write a nested for loop that cycles through each entries in the first list and
multiples it by each of the entries in the second list, and prints the result to the screen.

Multiple returns
• You can have a function return multiple outputs.
In: Out:

Reading and writing to files in Python: The file
object
• File handling in Python can easily be done with the built-in object file.
• The file object provides all of the basic functions necessary in order to
manipulate files.
• Open up notepad or notepad++. Write some text and save the file
to a location and with a name you’ll remember.

The open() function
• Before you can work with a file, you first have to open it using Python’s in-built
open() function.
• The open() function takes two arguments; the name of the file that you wish to use
and the mode for which we would like to open the file
• By default, the open() function opens a file in ‘read mode’; this is what the ‘r’ above
signifies.
• There are a number of different file opening modes. The most common are: ‘r’=
read, ‘w’=write, ‘r+’=both reading and writing, ‘a’=appending.
• Use the open() function to read the file in.

The close() function
• Likewise, once you’re done working with a file, you can close it with the close() function.
• Using this function will free up any system resources that are being used up by having
the file open.

Reading in a file and printing to screen
example
Using what you have now learned about for loops, it is possible to open
a file for reading and then print each line in the file to the screen using
a for loop.
• Use a for loop and the variable name that you assigned the open file to in
order to print each of the lines in your file to the screen.
In: Out:

The read() function
• However, you don’t need to use any loops to access file contents.
Python has three in-built file reading commands:
1. <file>.read() = Returns the entire contents of the file as a single string:
2. <file>.readline() = Returns one line at a time:
3. <file>.readlines() = Returns a list of lines:

The write() function
• Likewise, there are two similar in-built functions for getting Python to
write to a file:
1. <file>.write() = Writes a specified sequence of characters to a file:
2. <file>.writelines() = Writes a list of strings to a file:
• Important: Using the write() or writelines() function will overwrite anything contained
within a file, if a file of the same name already exists in the working directory.

Practice – writing to a file in Python
Part 1:
• Open the file you created in the last practice and ready it for being written to.
• Write a string to that file. Note: this will overwrite the old contents.
• Remember to close the file once you are done.
Part 2:
• Create a list of strings.
• Use the open() function to create a new .txt file and write your list of strings to
this file.

The append() function
• If you do not want to overwrite a file’s contents, you can use the append() function.
• To append to an existing file, simply put ‘a’ instead of ‘r’ or ‘w’ in the open() when opening a file.

Practice – appending to a file in Python
• Open the text file you created in part two of the writing to a file practice, and ready it
for appending.
• Define a string object.
• Appending this new string object to the file.

A word on import
• To use a package in your code, you must first make it accessible.
• This is one of the features of Python that make it so popular.
In:
• There are pre-built Python packages for pretty much everything.
In:

Plotting in Python
• Before creating an plots, it is worth spending sometime familiarising
ourselves with the matplotlib module. It will save a lot of time later on.

Some history….
• Matplotlib was originally developed by a neurobiologist in order to
emulate aspects of the MATLAB software.
• The pythonic concept of importing is not utilised by MATLAB, and this
is why something called Pylab exists.
• Pylab is a module within the Matplotlib library that was built to mimic
the MATLAB style. It only exists in order to bring aspects of NumPy and
Matplotlib into the namespace, thus making for an easier transition for
ex-MATLAB users, because they only had to do one import in order to
access the necessary functions:
• However, using the above command is now considered bad practice,
and Matplotlib actually advises against using it due to the way in which it
creates many opportunities for conflicted name bugs.

Getting started
• Without Pylab, we can normally get away with just one canonical
import; the top line from the example below.
• We are also going to import NumPy, which we are going to use to
generate random data for our examples.

Different graph types
• A simple line graph can be plotted with plot().
• A histogram can be created with hist().
• A bar chart can be created with bar().
• A pie chart can be created with pie().
• A scatter plot can be created with scatter().
• The table() function adds a text table to an axes.
• Plus many more….

Our first plot
• You may be wondering why the x-axis ranges from
0-3 and the y-axis from 1-4.
• If you provide a single list or array to the plot()
command, Matplotlib assumes it is a sequence of
y values, and automatically generates the x values
for you.
• Since python ranges start with 0, the default x
vector has the same length as y but starts with 0.
• Hence the x data are [0,1,2,3].

The plot() function
• The plot() argument is quite versatile,
and will take any arbitrary collection
of numbers. For example, if we add an
extra entry to the x axis, and replace
the last entry in the Y axis and add
another entry:

The plot() function
• The plot() function has an optional third argument that specifies the
appearance of the data points.
• The default is b-, which is the blue solid line seen in the last two
examples. The full list of styles can be found in the documentation for the
plot() on the Matplotlib page

The plot() function
• You can quite easily alter the properties of the line with the plot() function.

Altering tick labels
• The plt.xticks() and plt.yticks()
allows you to manually
alter the ticks on the x-axis
and y-axis respectively.
• Note that the tick values
have to be contained
within a list object.

Practice- Basic line graph
Let’s write a Python program to draw a line graph with suitable labels
for the x-axis and y-axis. Include a title.

The setp() function
• The setp() allows you to set multiple properties for a list of lines, if you want all the lines to be
matching.
• You can use the setp() function along with either the line or lines function in order to get
a list of settable line properties.

The axis() function
• The axis() function allows us to specify the range of the axis.
• It requires a list that contains the following:
[The min x-axis value, the max x-axis value, the min y-axis, the max y-axis value]

Matplotlib and NumPy arrays
• Normally when working with numerical data, you’ll be using NumPy
arrays.
• This is still straight forward to do in Matplotlib; in fact all sequences are
converted into NumPy arrays internally anyway.

Working with text
• There are a number of different ways in which to add
text to your graph:
- title() = Adds a title to your graph, takes a
string as an argument
- xlabel() = Add a title to the x-axis, also
takes a string as an argument
- ylabel() = Same as xlabel()
- text() = Can be used to add text to an
arbitrary location on your graph. Requires
the following arguments:
text(x-axis location, y-axis location, the string of
text to be added)
• Matplotlib uses TeX equation expressions. So, as an
example, if you wanted to put in one of the text
blocks, you would write plt.title(r'$sigma_i=15$').

Annotating data points
• The annotate() function allows you to easily annotate data points or
specific area on a graph.

Legends
• The location of a legend is specified by
the loc command. There are a number of
in-built locations that can be altered by
replacing the number. The Matplotlib
website has a list of all locations in the
documentation page for location().
• You can then use the bbox_to_anchor()
function to manually place the legend,
or when used with loc, to make slight
alterations to the placement.

Saving a figure as a file
• The plt.savefig() allows you to
save your plot as a file.
• It takes a string as an
argument, which will be the
name of the file. You must
remember to state which file
type you want the figure
saved as; i.e. png or jpeg.
• Make sure you put the
plt.savefig() before the plt.show()
function. Otherwise, the file
will be a blank file.

Scatter plot exercise
Let’s write a Python program to plot quantities which have an x and y position; a scatter
graph.

Debugging
• Debugging is in fundamental aspect of coding, and you will probably spend more
time debugging than actually writing code.
• EVERYONE has to debug, it is nothing to be ashamed of.
• In fact, you should be particularly concerned if you do write a programme that does
not display any obvious errors, as it likely means that you are just unaware of them.
• There are a number of debugging programmes available to coders. However,
debugging the most common issues that you’ll encounter when developing
programmes can be done by following a few key principles.
• However, always remember that sometimes fixing a
bug can create new bugs.

Print everything
• When debugging, the most important function at your disposal is the
print command. Every coder uses this as a debugging tool, regardless
of their amount of experience.
• You should have some sense as to what every line of code you have
written does. If not, print those lines out. You will then be able to see
how the values of variables are changing as the programme runs
through.
• Even if you think you know what each line does, it is still
recommended that you print out certain lines as often this can aid
you in realising errors that you may have overlooked.

Print examples
I want the value of variable to be 10 upon
completion of the for loop. Did the for loop work
correctly?
Yes, it did.
Did this chunk of code run?
No.

Run your code when you make changes
• Do not sit down and code for a hour or so without running the code
you are writing. Chances are, you will never get to the bottom of all of
the errors that your programme reports when it runs.
• Instead, you should run your script every few minutes. It is not
possible to run your code too many times.
• Remember, the more code you write or edit between test runs, the
more places you are going to have to go back an investigate when
your code hits an error.

Read your error messages
• Do not be disheartened when you get an error message. More often
than not, you’ll realise what the error is as soon as you read the
message; i.e. the for loop doesn’t work on a list because the list is
empty.
• This is particularly the case with Python, which provides you with
error messages in ‘clear English’ compared to the cryptic messages
given by offered by other languages.
• At the very least, the error message will let you know which lines is
experiencing the error. However, this may not be the line causing the
error. Still, this offers a good starting point for your bug search.

Google the error message
• This can sometimes be a bit of a hit-or-miss, depending on the nature of the error.
• If your error is fairly specific, then there will nearly always be a webpage where
someone has already asked for help with an error that is either identical or very
similar to the one you are experiencing; stackoverflow.com is the most common page
you’ll come across in this scenario.
• Do make sure that you read the description
of the problem carefully to ensure that the
problem is the same as the one you are
dealing with. Then read the first two or
three replies to see if page contains a
workable solution.
• If you cannot work out the cause of an error
message, google the error code and description.

Comment out code
• You can often comment out bits of code that are not related to the
chunk of code that contains the error.
• This will obviously make the code run faster and might make it easier
to isolate the error.

Binary searches
• This method draws upon a lot of the methods we have already
covered.
• Here, you want to break the code into chunks; normally two chunks,
hence this method’s name.
• You then isolate which chunk of code the error is in.
• After which, you take the chunk of code in question, and divide that
up, and work out which of these new chunks contains the error.
• So on until you’ve isolate the cause of the error.

Walk away
• If you have been trying to fix an error for a prolonged period of time,
30 minutes or so, get up and walk away from the screen and do
something else for a while.
• Often the answer to your issue will present itself upon your return to
the computer, as if by magic.

Phrase your problem as a question
• Many software developers have been
trained to phrase their problem as a
question.
• The idea here is that phrasing your issue in
this manner often helps you to realise the
cause of the problem.
• This often works!

Ask someone
• If all else fails, do not hesitate to ask a colleague or friend who is a
coder and maybe familiar with the language for help.
• They may not even need to be a specialist, sometimes a fresh pair of
eyes belonging to someone who is not invested in the project is more
efficient at helping you work out your issue than spending hours
trying to solve the issue on your own or getting lost the internet trying
to find a solution.

Useful resources
• There are two great online resources for learning this language
through practical examples. These are the Code Academy (
https://www.codecademy.com/catalog/subject/web-development)
and Data Camp (
https://www.datacamp.com/?utm_source=adwords_ppc&utm_camp
aignid=805200711&utm_adgroupid=39268379982&utm_device=c&u
tm_keyword=data%20camp&utm_matchtype=e&utm_network=g&ut
m_adpostion=1t1&utm_creative=230953641482&utm_targetid=kwd-
298095775602&utm_loc_interest_ms=&utm_loc_physical_ms=10067
07&gclid=EAIaIQobChMI3o2iqtbV2wIVTkPTCh2QRA19EAAYASAAEgLZ
dPD_BwE
).

python_computer engineering_semester_computer_language.pptx

More Related Content

Similar to python_computer engineering_semester_computer_language.pptx (20)

Recently uploaded (20)

python_computer engineering_semester_computer_language.pptx