oracle forms book

Oracle®
Forms Developer
Form Builder Reference, Volume 1
Release 6i
January, 2000
Part No: A73074-01

Oracle Forms Developer: Form Builder Reference, Release 6i
Volume 1
Part No: A73074-01
Copyright © 1999, Oracle Corporation. All rights reserved.
Contributors: Fred Bethke, Joan Carter, Ken Chu, Kate Dumont, Tom Haunert, Colleen McCann, Leanne
Soylemez, Poh Lee Tan, Tony Wolfram
The programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently
dangerous applications. It shall be the licensee’s responsibility to take all appropriate fail-safe, backup,
redundancy, and other measures to ensure the safe use of such applications if the programs are used for such
purposes, and Oracle Corporation disclaims liability for any damages caused by such use of the programs.
The programs (which include both the software and documentation) contain proprietary information of Oracle
Corporation; they are provided under a license agreement containing restrictions on use and disclosure and are
also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering,
disassembly, or decompilation of the programs is prohibited.
The information contained in this document is subject to change without notice. If you find any problems in the
documentation, please report them to us in writing. Oracle Corporation does not warrant that this document is
error free. Except as may be expressly permitted in your license agreement for these programs, no part of these
programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of Oracle Corporation.
If the programs are delivered to the U.S. Government or anyone licensing or using the programs on behalf of
the U.S. Government, the following notice is applicable:
Restricted Rights Notice Programs delivered subject to the DOD FAR Supplement are "commercial computer
software" and use, duplication, and disclosure of the programs, including documentation, shall be subject to the
licensing restrictions set forth in the applicable Oracle license agreement. Otherwise, programs delivered
subject to the Federal Acquisition Regulations are "restricted computer software" and use, duplication, and
disclosure of the programs shall be subject to the restrictions in FAR 52.227-19, Commercial Computer
Software - Restricted Rights (June, 1987). Oracle Corporation, 500 Oracle Parkway, Redwood City, CA 94065.
Oracle is a registered trademark, and JDeveloper, JInitiator, Oracle7, Oracle8, Oracle8i, and PL/SQL are
trademarks or registered trademarks of Oracle Corporation. All other company or product names mentioned are
used for identification purposes only and may be trademarks of their respective owners.

i
Table of Contents
TABLE OF CONTENTS ..................................................................................................I
SEND US YOUR COMMENTS.................................................................................XIII
PREFACE.......................................................................................................................XV
BUILT-IN SUBPROGRAMS .......................................................................................... 1
Built-ins overview...................................................................................................................................1
Built-in syntax.........................................................................................................................................1
Built-in named parameters......................................................................................................................2
Built-in code examples............................................................................................................................2
Built-in object IDs...................................................................................................................................2
Built-in form coordinate units.................................................................................................................2
Built-in uppercase return values..............................................................................................................3
Restricted built-in subprograms ..............................................................................................................3
Built-in constants ....................................................................................................................................4
Individual built-in descriptions ...............................................................................................................4
ABORT_QUERY built-in.......................................................................................................................5
ACTIVATE_SERVER built-in...............................................................................................................6
ADD_GROUP_COLUMN built-in.........................................................................................................7
ADD_GROUP_ROW built-in ................................................................................................................9
ADD_LIST_ELEMENT built-in ..........................................................................................................11
ADD_OLEARGS built-in.....................................................................................................................13
ADD_PARAMETER built-in ...............................................................................................................14
ADD_TREE_DATA built-in ................................................................................................................16
ADD_TREE_NODE built-in ................................................................................................................19
APPLICATION_PARAMETER built-in..............................................................................................21
BELL built-in........................................................................................................................................22
BLOCK_MENU built-in.......................................................................................................................23
BREAK built-in ....................................................................................................................................24
CALL_FORM built-in ..........................................................................................................................25
CALL_INPUT built-in..........................................................................................................................28
CALL_OLE ..........................................................................................................................................29
CALL_OLE_<returntype> built-in.......................................................................................................30
CANCEL_REPORT_OBJECT built-in ................................................................................................31
CHECKBOX_CHECKED built-in .......................................................................................................32
CHECK_RECORD_UNIQUENESS built-in .......................................................................................34
CLEAR_BLOCK built-in .....................................................................................................................35
CLEAR_EOL built-in...........................................................................................................................37
CLEAR_FORM built-in........................................................................................................................38
CLEAR_ITEM built-in.........................................................................................................................40
CLEAR_LIST built-in ..........................................................................................................................41
CLEAR_MESSAGE built-in ................................................................................................................43

ii
CLEAR_RECORD built-in...................................................................................................................44
CLOSE_FORM built-in........................................................................................................................45
CLOSE_SERVER built-in....................................................................................................................46
COMMIT_FORM built-in ....................................................................................................................47
CONVERT_OTHER_VALUE built-in ................................................................................................49
COPY built-in.......................................................................................................................................50
COPY_REGION built-in ......................................................................................................................52
COPY_REPORT_OBJECT_OUTPUT built-in ...................................................................................53
COUNT_QUERY built-in ....................................................................................................................54
CREATE_GROUP built-in...................................................................................................................56
CREATE_GROUP_FROM_QUERY built-in......................................................................................58
CREATE_OLEOBJ built-in..................................................................................................................60
CREATE_PARAMETER_LIST built-in..............................................................................................61
CREATE_QUERIED_RECORD built-in.............................................................................................63
CREATE_RECORD built-in ................................................................................................................65
CREATE_TIMER built-in....................................................................................................................66
CREATE_VAR built-in........................................................................................................................68
CUT_REGION built-in.........................................................................................................................69
DBMS_ERROR_CODE built-in...........................................................................................................70
DBMS_ERROR_TEXT built-in ...........................................................................................................72
DEBUG_MODE built-in ......................................................................................................................74
DEFAULT_VALUE built-in ................................................................................................................75
DELETE_GROUP built-in ...................................................................................................................76
DELETE_GROUP_ROW built-in ........................................................................................................77
DELETE_LIST_ELEMENT built-in....................................................................................................79
DELETE_PARAMETER built-in.........................................................................................................81
DELETE_RECORD built-in.................................................................................................................82
DELETE_TIMER built-in ....................................................................................................................84
DELETE_TREE_NODE built-in..........................................................................................................86
DESTROY_PARAMETER_LIST built-in ...........................................................................................88
DESTROY_VARIANT built-in............................................................................................................89
DISPATCH_EVENT built-in ...............................................................................................................90
DISPLAY_ERROR built-in..................................................................................................................91
DISPLAY_ITEM built-in .....................................................................................................................92
DOWN built-in .....................................................................................................................................94
DO_KEY built-in..................................................................................................................................95
DUMMY_REFERENCE built-in .........................................................................................................97
DUPLICATE_ITEM built-in................................................................................................................98
DUPLICATE_RECORD built-in..........................................................................................................99
EDIT_TEXTITEM built-in.................................................................................................................100
ENFORCE_COLUMN_SECURITY built-in .....................................................................................102
ENTER built-in...................................................................................................................................103
ENTER_QUERY built-in ...................................................................................................................104
ERASE built-in...................................................................................................................................106
ERROR_CODE built-in......................................................................................................................107
ERROR_TEXT built-in ......................................................................................................................108
ERROR_TYPE built-in.......................................................................................................................109
EXEC_VERB built-in.........................................................................................................................111
EXECUTE_QUERY built-in..............................................................................................................113
EXECUTE_TRIGGER built-in ..........................................................................................................115
EXIT_FORM built-in .........................................................................................................................117
FETCH_RECORDS built-in...............................................................................................................119
FIND_ALERT built-in........................................................................................................................121
FIND_BLOCK built-in.......................................................................................................................123
FIND_CANVAS built-in ....................................................................................................................124

iii
FIND_COLUMN built-in ...................................................................................................................125
FIND_EDITOR built-in......................................................................................................................126
FIND_FORM built-in .........................................................................................................................127
FIND_GROUP built-in.......................................................................................................................128
FIND_ITEM built-in...........................................................................................................................129
FIND_LOV built-in ............................................................................................................................130
FIND_MENU_ITEM built-in .............................................................................................................131
FIND_OLE_VERB built-in ................................................................................................................132
FIND_RELATION built-in.................................................................................................................134
FIND_REPORT_OBJECT built-in.....................................................................................................135
FIND_TAB_PAGE built-in ................................................................................................................136
FIND_TIMER built-in........................................................................................................................137
FIND_TREE_NODE built-in .............................................................................................................138
FIND_VA built-in...............................................................................................................................140
FIND_VIEW built-in..........................................................................................................................141
FIND_WINDOW built-in...................................................................................................................142
FIRST_RECORD built-in...................................................................................................................143
FORM_FAILURE built-in..................................................................................................................144
FORM_FATAL built-in......................................................................................................................146
FORM_SUCCESS built-in .................................................................................................................148
FORMS_DDL built-in........................................................................................................................150
GENERATE_SEQUENCE_NUMBER built-in .................................................................................153
GET_APPLICATION_PROPERTY built-in......................................................................................154
GET_BLOCK_PROPERTY built-in ..................................................................................................158
GET_CANVAS_PROPERTY built-in ...............................................................................................164
GET_CUSTOM_PROPERTY built-in ...............................................................................................166
GET_FILE_NAME built-in................................................................................................................167
GET_FORM_PROPERTY built-in ....................................................................................................169
GET_GROUP_CHAR_CELL built-in................................................................................................173
GET_GROUP_DATE_CELL built-in ................................................................................................175
GET_GROUP_NUMBER_CELL built-in..........................................................................................177
GET_GROUP_RECORD_NUMBER built-in....................................................................................179
GET_GROUP_ROW_COUNT built-in..............................................................................................181
GET_GROUP_SELECTION built-in.................................................................................................182
GET_GROUP_SELECTION_COUNT built-in .................................................................................184
GET_INTERFACE_POINTER built-in .............................................................................................185
GET_ITEM_INSTANCE_PROPERTY built-in ................................................................................186
GET_ITEM_PROPERTY built-in......................................................................................................188
GET_LIST_ELEMENT_COUNT built-in .........................................................................................198
GET_LIST_ELEMENT_LABEL built-in ..........................................................................................200
GET_LIST_ELEMENT_VALUE built-in..........................................................................................201
GET_LOV_PROPERTY built-in .......................................................................................................202
GET_MENU_ITEM_PROPERTY built-in ........................................................................................204
GET_MESSAGE built-in ...................................................................................................................206
GET_OLE_<proptype> built-in..........................................................................................................207
GET_OLEARG_<type> built-in.........................................................................................................208
GET_OLE_MEMBERID built-in.......................................................................................................209
GET_PARAMETER_ATTR built-in..................................................................................................210
GET_PARAMETER_LIST built-in....................................................................................................211
GET_RADIO_BUTTON_PROPERTY built-in .................................................................................212
GET_RECORD_PROPERTY built-in................................................................................................215
GET_RELATION_PROPERTY built-in............................................................................................218
GET_REPORT_OBJECT_PROPERTY built-in ................................................................................220
GET_TAB_PAGE_PROPERTY built-in ...........................................................................................222
GET_TREE_NODE_PARENT built-in..............................................................................................224

iv
GET_TREE_NODE_PROPERTY built-in.........................................................................................226
GET_TREE_PROPERTY built-in......................................................................................................228
GET_TREE_SELECTION built-in ....................................................................................................230
GET_VA_PROPERTY built-in..........................................................................................................232
GET_VAR_BOUNDS built-in ...........................................................................................................234
GET_VAR_DIMS built-in..................................................................................................................235
GET_VAR_TYPE built-in..................................................................................................................236
GET_VERB_COUNT built-in............................................................................................................237
GET_VERB_NAME built-in..............................................................................................................239
GET_VIEW_PROPERTY built-in .....................................................................................................240
GET_WINDOW_PROPERTY built-in ..............................................................................................242
GO_BLOCK built-in...........................................................................................................................244
GO_FORM built-in.............................................................................................................................245
GO_ITEM built-in ..............................................................................................................................246
GO_RECORD built-in........................................................................................................................247
HELP built-in......................................................................................................................................248
HIDE_MENU built-in.........................................................................................................................249
HIDE_VIEW built-in..........................................................................................................................250
HIDE_WINDOW built-in...................................................................................................................251
HOST built-in .....................................................................................................................................253
ID_NULL built-in...............................................................................................................................255
IMAGE_SCROLL built-in..................................................................................................................257
IMAGE_ZOOM built-in.....................................................................................................................258
INIT_OLEARGS built-in....................................................................................................................260
INITIALIZE_CONTAINER built-in ..................................................................................................261
INSERT_RECORD built-in................................................................................................................262
ISSUE_ROLLBACK built-in .............................................................................................................263
ISSUE_SAVEPOINT built-in.............................................................................................................264
ITEM_ENABLED built-in .................................................................................................................266
LAST_OLE_ERROR built-in.............................................................................................................267
LAST_OLE_EXCEPTION built-in ....................................................................................................268
LAST_RECORD built-in....................................................................................................................269
LIST_VALUES built-in......................................................................................................................270
LOCK_RECORD built-in...................................................................................................................271
LOGON built-in..................................................................................................................................272
LOGON_SCREEN built-in.................................................................................................................274
LOGOUT built-in ...............................................................................................................................276
MENU_CLEAR_FIELD built-in........................................................................................................277
MENU_NEXT_FIELD built-in ..........................................................................................................278
MENU_PARAMETER built-in..........................................................................................................279
MENU_PREVIOUS_FIELD built-in .................................................................................................280
MENU_REDISPLAY built-in ............................................................................................................281
MENU_SHOW_KEYS built-in..........................................................................................................282
MESSAGE built-in .............................................................................................................................283
MESSAGE_CODE built-in ................................................................................................................285
MESSAGE_TEXT built-in.................................................................................................................286
MESSAGE_TYPE built-in .................................................................................................................287
MOVE_WINDOW built-in.................................................................................................................289
NAME_IN built-in..............................................................................................................................291
NEW_FORM built-in .........................................................................................................................295
NEXT_BLOCK built-in......................................................................................................................298
NEXT_FORM built-in........................................................................................................................299
NEXT_ITEM built-in .........................................................................................................................300
NEXT_KEY built-in...........................................................................................................................301
NEXT_MENU_ITEM built-in............................................................................................................302

v
NEXT_RECORD built-in...................................................................................................................303
NEXT_SET built-in............................................................................................................................304
OLEVAR_EMPTY built-in ................................................................................................................305
OPEN_FORM built-in ........................................................................................................................306
PASTE_REGION built-in...................................................................................................................309
PAUSE built-in...................................................................................................................................310
PLAY_SOUND built-in......................................................................................................................311
POPULATE_GROUP built-in............................................................................................................312
POPULATE_GROUP_FROM_TREE built-in...................................................................................313
POPULATE_GROUP_WITH_QUERY built-in ................................................................................315
POPULATE_LIST built-in.................................................................................................................317
POPULATE_TREE built-in ...............................................................................................................319
POST built-in......................................................................................................................................320
PREVIOUS_BLOCK built-in.............................................................................................................321
PREVIOUS_FORM built-in ...............................................................................................................322
PREVIOUS_ITEM built-in.................................................................................................................323
PREVIOUS_MENU built-in...............................................................................................................324
PREVIOUS_MENU_ITEM built-in...................................................................................................325
PREVIOUS_RECORD built-in ..........................................................................................................326
PRINT built-in ....................................................................................................................................327
PTR_TO_VAR built-in.......................................................................................................................328
QUERY_PARAMETER built-in........................................................................................................329
READ_IMAGE_FILE built-in............................................................................................................331
READ_SOUND_FILE built-in...........................................................................................................333
RECALCULATE built-in...................................................................................................................335
REDISPLAY built-in..........................................................................................................................336
RELEASE_OBJ built-in .....................................................................................................................337
REPLACE_CONTENT_VIEW built-in .............................................................................................338
REPLACE_MENU built-in ................................................................................................................340
REPORT_OBJECT_STATUS built-in...............................................................................................342
RESET_GROUP_SELECTION built-in.............................................................................................343
RESIZE_WINDOW built-in...............................................................................................................344
RETRIEVE_LIST built-in ..................................................................................................................346
RUN_PRODUCT built-in...................................................................................................................347
RUN_REPORT_OBJECT built-in .....................................................................................................350
SCROLL_DOWN built-in ..................................................................................................................351
SCROLL_UP built-in..........................................................................................................................352
SCROLL_VIEW built-in ....................................................................................................................353
SELECT_ALL built-in........................................................................................................................355
SELECT_RECORDS built-in.............................................................................................................356
SERVER_ACTIVE built-in................................................................................................................357
SET_ALERT_BUTTON_PROPERTY built-in .................................................................................358
SET_ALERT_PROPERTY built-in....................................................................................................359
SET_APPLICATION_PROPERTY built-in ......................................................................................361
SET_BLOCK_PROPERTY built-in...................................................................................................362
SET_CANVAS_PROPERTY built-in ................................................................................................367
SET_CUSTOM_ITEM_PROPERTY built-in ....................................................................................369
SET_CUSTOM_PROPERTY built-in................................................................................................370
SET_FORM_PROPERTY built-in .....................................................................................................372
SET_GROUP_CHAR_CELL built-in ................................................................................................376
SET_GROUP_DATE_CELL built-in.................................................................................................377
SET_GROUP_NUMBER_CELL built-in ..........................................................................................379
SET_GROUP_SELECTION built-in..................................................................................................380
SET_INPUT_FOCUS built-in ............................................................................................................381
SET_ITEM_INSTANCE_PROPERTY built-in .................................................................................382

vi
SET_ITEM_PROPERTY built-in ......................................................................................................385
SET_LOV_COLUMN_PROPERTY built-in .....................................................................................397
SET_LOV_PROPERTY built-in ........................................................................................................398
SET_MENU_ITEM_PROPERTY built-in .........................................................................................400
SET_OLE built-in...............................................................................................................................402
SET_PARAMETER_ATTR built-in ..................................................................................................403
SET_RADIO_BUTTON_PROPERTY built-in..................................................................................404
SET_RECORD_PROPERTY built-in ................................................................................................407
SET_RELATION_PROPERTY built-in ............................................................................................409
SET_REPORT_OBJECT_PROPERTY built-in ................................................................................411
SET_TAB_PAGE_PROPERTY built-in ............................................................................................413
SET_TIMER built-in ..........................................................................................................................415
SET_TREE_NODE_PROPERTY built-in .........................................................................................417
SET_TREE_PROPERTY built-in ......................................................................................................419
SET_TREE_SELECTION built-in .....................................................................................................422
SET_VA_PROPERTY built-in...........................................................................................................424
SET_VAR built-in ..............................................................................................................................426
SET_VIEW_PROPERTY built-in......................................................................................................427
SET_WINDOW_PROPERTY built-in...............................................................................................429
SHOW_ALERT built-in .....................................................................................................................432
SHOW_EDITOR built-in ...................................................................................................................433
SHOW_KEYS built-in........................................................................................................................435
SHOW_LOV built-in..........................................................................................................................436
SHOW_MENU built-in ......................................................................................................................438
SHOW_VIEW built-in........................................................................................................................439
SHOW_WINDOW built-in.................................................................................................................440
SYNCHRONIZE built-in....................................................................................................................441
TERMINATE built-in.........................................................................................................................442
TO_VARIANT built-in.......................................................................................................................443
UNSET_GROUP_SELECTION built-in............................................................................................445
UP built-in...........................................................................................................................................446
UPDATE_CHART built-in.................................................................................................................447
UPDATE_RECORD built-in..............................................................................................................448
USER_EXIT built-in ..........................................................................................................................449
VALIDATE built-in............................................................................................................................451
VARPTR_TO_VAR built-in ..............................................................................................................453
VAR_TO_TABLE built-in .................................................................................................................454
VAR_TO_<type> built-in...................................................................................................................455
VAR_TO_VARPTR built-in ..............................................................................................................456
VBX.FIRE_EVENT built-in...............................................................................................................457
VBX.GET_PROPERTY built-in ........................................................................................................459
VBX.GET_VALUE_PROPERTY built-in.........................................................................................461
VBX.INVOKE_METHOD built-in ....................................................................................................462
VBX.SET_PROPERTY built-in.........................................................................................................463
VBX.SET_VALUE_PROPERTY built-in..........................................................................................465
WEB.SHOW_DOCUMENT built-in..................................................................................................466
WHERE_DISPLAY built-in...............................................................................................................467
WRITE_IMAGE_FILE built-in..........................................................................................................468
WRITE_SOUND_FILE built-in .........................................................................................................470
OPTIONS....................................................................................................................... 472
About Form Builder Components.......................................................................................................472
Starting Form Builder Components ....................................................................................................473
Starting Form Builder Components from the Command Line ............................................................474

vii
Logging on to the Database.................................................................................................................477
Forms Runtime Options......................................................................................................................478
Array (Forms Runtime).......................................................................................................................480
Block_Menu (Forms Runtime) ...........................................................................................................481
Buffer_Records (Forms Runtime).......................................................................................................482
Debug (Forms Runtime)......................................................................................................................483
Debug_Messages (Forms Runtime)....................................................................................................484
Help (Forms Runtime) ........................................................................................................................485
Interactive (Forms Runtime)...............................................................................................................486
Keyin (Forms Runtime) ......................................................................................................................487
Keyout (Forms Runtime) ....................................................................................................................488
Logon_Screen (Forms Runtime).........................................................................................................489
Optimize SQL Processing (Forms Runtime).......................................................................................490
Optimize Transaction Mode Processing (Forms Runtime) .................................................................491
Options_Screen (Forms Runtime).......................................................................................................492
Output_File (Forms Runtime).............................................................................................................493
PECS (Forms Runtime).......................................................................................................................494
Query_Only (Forms Runtime) ............................................................................................................495
Quiet (Forms Runtime) .......................................................................................................................496
Statistics (Forms Runtime)..................................................................................................................497
Term (Forms Runtime) .......................................................................................................................498
Window_State (Forms Runtime).........................................................................................................499
Setting Form Compiler Options..........................................................................................................500
Add_Triggers (Form Compiler)..........................................................................................................502
Batch (Form Compiler).......................................................................................................................503
Build (Form Compiler) .......................................................................................................................504
Compile_All (Form Compiler)............................................................................................................505
CRT_File (Form Compiler) ................................................................................................................506
Debug (Form Compiler)......................................................................................................................507
Delete (Form Compiler)......................................................................................................................508
Extract (Form Compiler).....................................................................................................................509
Help (Form Compiler) ........................................................................................................................510
Insert (Form Compiler) .......................................................................................................................511
Logon (Form Compiler)......................................................................................................................512
Module_Access (Form Compiler).......................................................................................................513
Module_Type (Form Compiler)..........................................................................................................514
Nofail (Form Compiler)......................................................................................................................515
Options_Screen (Form Compiler).......................................................................................................516
Output_File (Form Compiler).............................................................................................................517
Parse (Form Compiler)........................................................................................................................518
Script (Form Compiler).......................................................................................................................519
Statistics (Form Compiler)..................................................................................................................520
Strip_Source (Form Compiler) ...........................................................................................................521
Upgrade (Form Compiler) ..................................................................................................................522
Upgrade_Roles (Form Compiler) .......................................................................................................523
Version (Form Compiler)....................................................................................................................524
Widen_Fields (Form Compiler)..........................................................................................................525
Setting Form Builder Preferences .......................................................................................................526
Color Mode.........................................................................................................................................528
Color Palette .......................................................................................................................................529
Build Before Running.........................................................................................................................530
Help (Form Builder) ...........................................................................................................................531
HTML File Name ...............................................................................................................................532
Access preference (Form Builder) ......................................................................................................533
Module_Type (Form Builder).............................................................................................................534

viii
Printer .................................................................................................................................................535
Run Modules Asynchronously............................................................................................................536
Save Before Building..........................................................................................................................537
Subclassing Path .................................................................................................................................538
Suppress Hints ....................................................................................................................................539
Term (Form Builder)...........................................................................................................................540
USESDI (Forms Runtime and Web Forms Runtime) .........................................................................541
Use System Editor...............................................................................................................................542
User Preference File............................................................................................................................543
Welcome Dialog .................................................................................................................................544
Welcome Pages...................................................................................................................................545
PROPERTIES............................................................................................................... 546
What are properties? ...........................................................................................................................546
About setting and modifying properties..............................................................................................546
Reading property descriptions.............................................................................................................547
About Control property.......................................................................................................................548
Access Key property...........................................................................................................................549
Alert Style property.............................................................................................................................550
Alias property......................................................................................................................................551
Allow Expansion property ..................................................................................................................552
Allow Empty Branches property.........................................................................................................553
Allow Multi-Line Prompts property....................................................................................................554
Allow Start-Attached Prompts property..............................................................................................555
Allow Top-Attached Prompts property...............................................................................................556
Application Instance property.............................................................................................................557
Arrow Style property...........................................................................................................................558
Associated Menus property.................................................................................................................559
Audio Channels property ....................................................................................................................560
Automatic Column Width property.....................................................................................................561
Automatic Display property................................................................................................................562
Automatic Position property ...............................................................................................................563
Automatic Query property ..................................................................................................................564
Automatic Refresh property................................................................................................................565
Automatic Select property...................................................................................................................567
Automatic Skip (Item) property..........................................................................................................568
Automatic Skip (LOV) property .........................................................................................................569
Background_Color property ...............................................................................................................570
Bevel property.....................................................................................................................................571
Block Description property.................................................................................................................572
Bottom Title (Editor) property............................................................................................................573
Bounding Box Scalable property ........................................................................................................574
Builtin_Date_Format property............................................................................................................575
Button 1 Label, Button 2 Label, Button 3 Label properties ................................................................577
Calculation Mode property .................................................................................................................578
Calling_Form property........................................................................................................................579
Canvas property ..................................................................................................................................580
Canvas Type property .........................................................................................................................581
Cap Style property ..............................................................................................................................582
Case Insensitive Query property .........................................................................................................583
Case Restriction property....................................................................................................................584
Character Cell WD/HT properties ......................................................................................................585
Chart Type property............................................................................................................................586
Chart Subtype property .......................................................................................................................587

ix
Check Box Mapping of Other Values property...................................................................................588
Checked property................................................................................................................................589
Clip Height property ...........................................................................................................................590
Clip Width property ............................................................................................................................591
Clip X Position property .....................................................................................................................592
Clip Y Position property .....................................................................................................................593
Close Allowed property ......................................................................................................................594
Closed property...................................................................................................................................595
Column Mapping Properties property.................................................................................................596
Column Name property.......................................................................................................................598
Column Specifications property..........................................................................................................599
Column Title (LOV) property.............................................................................................................601
Column Value (Record Group) property ............................................................................................602
Command Text property .....................................................................................................................603
Command Type property ....................................................................................................................604
Comments property.............................................................................................................................606
Communication Mode (Chart) property..............................................................................................607
Communication Mode (Report) property............................................................................................608
Compress property..............................................................................................................................609
Compression Quality property ............................................................................................................610
Conceal Data property ........................................................................................................................611
Connect_String property.....................................................................................................................612
Console Window property ..................................................................................................................613
Control Help property.........................................................................................................................614
Control Properties property.................................................................................................................615
Coordinate System property................................................................................................................616
Coordination property.........................................................................................................................618
Coordination_Status property .............................................................................................................620
Copy Value from Item property..........................................................................................................621
Current Record Visual Attribute Group property................................................................................622
Current_Form property .......................................................................................................................623
Current_Form_Name property............................................................................................................624
Current_Record property ....................................................................................................................625
Current_Row_Background_Color property........................................................................................626
Current_Row_Fill_Pattern property....................................................................................................627
Current_Row_Font_Name property....................................................................................................628
Current_Row_Font_Size property ......................................................................................................629
Current_Row_Font_Spacing property ................................................................................................630
Current_Row_Font_Style property.....................................................................................................631
Current_Row_Font_Weight property..................................................................................................632
Current_Row_Foreground_Color property.........................................................................................633
Current_Row_White_On_Black property...........................................................................................634
Cursor Mode property.........................................................................................................................635
Cursor_Style property.........................................................................................................................637
Custom Spacing property....................................................................................................................638
Dash Style property.............................................................................................................................639
Data Block Description property ........................................................................................................640
Data Query property............................................................................................................................641
Data Source Data Block (Chart) property ...........................................................................................642
Data Source Data Block (Report) property .........................................................................................643
Data Source X Axis property ..............................................................................................................644
Data Source Y Axis property ..............................................................................................................645
Data Type property .............................................................................................................................646
Data Type (Record Group) property ...................................................................................................651
Database Block property.....................................................................................................................652

x
Database_Value property....................................................................................................................653
Datasource property............................................................................................................................654
Date_Format_Compatibility_Mode property......................................................................................655
Default Alert Button property .............................................................................................................656
Default Button property ......................................................................................................................657
Default Font Scaling property.............................................................................................................658
Deferred property................................................................................................................................659
Defer Required Enforcement property................................................................................................660
Delete Allowed property.....................................................................................................................661
Delete Procedure Arguments property................................................................................................662
Delete Procedure Name property........................................................................................................663
Delete Procedure Result Set Columns property ..................................................................................664
Delete Record Behavior property .......................................................................................................665
Detail Block property..........................................................................................................................666
Detail Reference Item property...........................................................................................................667
Direction property...............................................................................................................................668
Display Hint Automatically property..................................................................................................672
Display in ’Keyboard Help’/’Keyboard Text’ property.........................................................................673
Display Quality property.....................................................................................................................674
Display Width (LOV) property...........................................................................................................675
Display without Privilege property .....................................................................................................676
Display_Height property.....................................................................................................................677
Display_Width property......................................................................................................................678
Displayed property..............................................................................................................................679
Distance Between Records property ...................................................................................................680
Dither property....................................................................................................................................681
DML Array Size property...................................................................................................................682
DML Data Target Name property.......................................................................................................683
DML Data Target Type property ........................................................................................................684
DML Returning Value property..........................................................................................................685
Edge Background Color property .......................................................................................................686
Edge Foreground Color property ........................................................................................................687
Edge Pattern property .........................................................................................................................688
Editor property....................................................................................................................................689
Editor X Position, Editor Y Position properties ..................................................................................690
Elements in List property....................................................................................................................691
Enabled (Item) property......................................................................................................................692
Enabled (Menu Item) property............................................................................................................693
Enabled (Tab Page) property ..............................................................................................................694
End Angle property.............................................................................................................................695
Enforce Column Security property......................................................................................................696
Enforce Primary Key (Block) property...............................................................................................697
Enterable property...............................................................................................................................698
Error_Date/Datetime_Format property...............................................................................................699
Execution Mode properties .................................................................................................................700
Execution Mode (Chart) property .......................................................................................................701
Execution Mode (Report) property .....................................................................................................702
Execution Hierarchy property.............................................................................................................703
Filename property ...............................................................................................................................704
Fill property ........................................................................................................................................705
Fill_Pattern property ...........................................................................................................................706
Filter Before Display property ............................................................................................................707
Fire in Enter-Query Mode property ....................................................................................................708
First Navigation Block property..........................................................................................................709
First_Block property ...........................................................................................................................710

xi
First_Detail_Relation property............................................................................................................711
First_Item property .............................................................................................................................712
First_Master_Relation property ..........................................................................................................713
Fixed Bounding Box property.............................................................................................................714
Fixed Length (Item) property..............................................................................................................715
Fixed Length (Menu Substitution Parameter) property.......................................................................716
Flag User Value Too Long property ...................................................................................................717
Font_Name property ...........................................................................................................................718
Font_Size property..............................................................................................................................719
Font_Spacing property........................................................................................................................720
Font_Style property.............................................................................................................................721
Font_Weight property.........................................................................................................................722
Foreground_Color property ................................................................................................................723
Form Horizontal Toolbar Canvas property .........................................................................................724
Form Vertical Toolbar Canvas property .............................................................................................725
INDEX............................................................................................................................ 726

xiii
Send Us Your Comments
Forms Developer Form Builder Reference, Release 6i
Volume 1
Part No: A73074-01
Oracle Corporation welcomes your comments and suggestions on the quality and usefulness of this
publication. Your input is an important part of the information used for revision.
• Did you find any errors?
• Is the information clearly presented?
• Do you need more information? If so, where?
• Are the examples correct? Do you need more examples?
• What features did you like most about this manual?
If you find any errors or have any other suggestions for improvement, please indicate the part number,
chapter, section, and page number (if available). You can send comments to us by electronic mail to
oddoc@us.oracle.com.
If you have any problems with the software, please contact your local Oracle World Wide Support Center.

xv
Preface
Welcome to Release 6i of the Forms Developer Form Builder Reference.
This reference guide includes information to help you effectively work with Forms Developer Form Builder
and contains detailed information about the following:
• Built-in subprograms
• Options
• Properties
• System variables
• Triggers
This preface explains how this user’s guide is organized and introduces other sources of information that
can help you use Forms Developer Form Builder.
Prerequisites
You should be familiar with your computer and its operating system. For example, you should know the
commands for deleting and copying files and understand the concepts of search paths, subdirectories, and
path names. Refer to your Microsoft Windows 95 or NT and DOS product documentation for more
information. You should also understand the fundamentals of Microsoft Windows, such as the elements of
an application window. You should also be familiar with such programs as the Explorer, Taskbar or Task
Manager, and Registry.
Notational Conventions
The following typographical conventions are used in this guide:
Convention Meaning
fixed-width font Text in a fixed-width font indicates commands that you enter exactly as shown.
Text typed on a PC is not case-sensitive unless otherwise noted.
In commands, punctuation other than brackets and vertical bars must be entered
exactly as shown.
lowercase Lowercase characters in a command statement represent a variable. Substitute
and appropriate value.
UPPERCASE Uppercase characters within the text represent command names, SQL reserved
words, and keywords.
boldface Boldface is used to indicate user interface items such as menu choices and
buttons.
C> Represents the DOS prompt. Your prompt may differ.

1
Built-in Subprograms
Built-ins overview
Form Builder provides built-in subprograms that you can call from triggers and user-named subprograms
that you write yourself. Built-ins provide programmatic control over standard application functions,
including navigation, interface control, and transaction processing.
This section includes information on the following:
• Built-in syntax
• Built-in named parameters
• Built-in code examples
• Built-in object IDs
• Restricted built-in subprograms
• Built-in constants
Built-in syntax
Named parameters are shown in an italic monospaced font. You can replace any named parameter with
the actual parameter, which can be a constant, a literal, a bind variable, or a number.
SET_TIMER(timer_name, milliseconds, iterate);
In this example, the timer name you supply must be enclosed in single quotes, because the timer_name is
a CHAR value. The milliseconds parameter is passed as a number and, as such, does not require single
quotes. The iterate parameter is passed as a constant, and, as such, must be entered exactly as shown in
the parameter description, without single quotes. Capitalization is unimportant.
In those cases where a number of optional elements are available, various alternate syntax statements are
presented. These alternatives are presented to preclude having to decipher various complicated
syntactical conventions.
Note that you sometimes use variables instead of including a specific object name. In those cases, do not
enclose the variable within single quotes. The following example illustrates a When-Timer-Expired
trigger that calls the SET_TIMER built-in and references a variable that contains a valid timer name:
DECLARE
the_timer CHAR := GET_APPLICATION_PROPERTY(TIMER_NAME);
BEGIN
SET_TIMER(the_timer, 60000, REPEAT);
END;

2
Built-in named parameters
The named parameter should be followed with the equal/greater than signs (=>), which point to the
actual parameter that follows the named parameter. For example, if you intend to change the
milliseconds in the SET_TIMER Built-in you can directly use that parameter with the following syntax:
SET_TIMER(timer_name => ’my_timer’, milliseconds => 12000,
iterate => NO_REPEAT);
Also, you can continue to call the built-in with the following syntax:
SET_TIMER(’my_timer’, 12000, NO_REPEAT);
Built-in code examples
Examples have been included for the built-in subprograms. Some examples are simple illustrations of
the syntax. Others are more complex illustrations of how to use the Built-in either alone or in
conjunction with other built-ins. A few points to keep in mind regarding the syntax of examples:
• Examples are shown exactly as they can be entered.
• Casing and use of italics can be ignored and is included for readability.
• Built-in names and other PL/SQL reserved words, such as IF, THEN, ELSE, BEGIN, and END are
shown in capital letters for easier readability.
• Named parameters, when illustrated, are shown in an italic typeface. If you choose to use named
parameters, enter these parameter names exactly as shown, without quotes and follow them with the
equal/greater than symbols (=>).
• CHAR type arguments must be enclosed in single quotes.
• Any other data type argument should not be enclosed in quotes.
• Special characters other than single quotes (’), commas (,), parentheses, underscores (_), and
semicolons(;) should be ignored.
Built-in object IDs
Some built-in subprograms accept object IDs as actual parameters. An object ID is an internal, opaque
handle that is assigned to each object when created in the Form Builder. Object IDs are internally
managed and cannot be externally viewed by the user. The only method you can use to retrieve the ID is
to define a local or global variable and assign the return value of the object to the variable.
You make the assignment by way of the FIND_ built-in functions. Once you have used FIND_ within a
PL/SQL block, you can use the variable as an object ID while still in that block. The valid PL/SQL type
for each object is included in the syntax descriptions for each parameter. The description for the
FIND_BLOCK built-in provides an example of how to obtain an object ID.
Built-in form coordinate units
Many built-in subprograms allow you to specify size and position coordinates, using properties such as:
• HEIGHT

3
• WIDTH
• DISPLAY_POSITION
• VIEWPORT_X_POS
• VIEWPORT_Y_POS
• VIEW_SIZE
• VIEWPORT_X_POS_ON_CANVAS
• VIEWPORT_Y_POS_ON_CANVAS
When you specify coordinates or width and height, you express these measurements in units of the
current form coordinate system, set on the Form Module property sheet. The form coordinate system
defines the units for specifying size and position coordinates of objects in the Form Builder. Use the
Coordinate System form module property to set the form’s coordinate units:
• character cells or
• real units:
inches
centimeters
pixels
points
When you design in the character cell coordinate system, all object dimensions and position coordinates
are expressed in character cells, so Form Builder accepts only whole numbers for size and position
properties.
When you design using real units (inches, centimeters, or points), all object dimensions and position
coordinates are expressed in the units you specify, so Form Builder will accept decimals as well as whole
numbers for size and position properties. The precision of real units is three digits, so you can specify
coordinates to thousandths. If you use pixels or character cells, coordinates are truncated to whole
numbers.
Built-in uppercase return values
The GET_X_PROPERTY built-ins, such as GET_FORM_PROPERTY, return CHAR arguments as
uppercase values. This will affect the way you compare results in IF statements.
Restricted built-in subprograms
Restricted built-ins affect navigation in your form, either external screen navigation, or internal
navigation. You can call these built-ins only from triggers while no internal navigation is occurring.
Restricted built-ins cannot be called from the Pre and Post triggers, which fire when Form Builder is
navigating from object to another.
Restricted built-ins can be called from the When triggers that are specific to interface items, such as
When-Button-Pressed or When-Checkbox-Changed. Restricted built-ins can also be called from any of
the When-New-"object"-Instance triggers and from key triggers.
Unrestricted built-ins do not affect logical or physical navigation and can be called from any trigger.

4
The built-in descriptions include a heading, Built-In Type, that indicates if the built-in is restricted or
unrestricted.
Built-in constants
Many of the built-in subprograms take numeric values as arguments. Often, constants have been defined
for these numeric arguments. A constant is a named numeric value. When passing a constant to a built-
in do not enclose the constant value in quotation marks.
Constants can only appear on the right side of an operator in an expression.
In some cases, a built-in can take a number of possible constants as arguments. Possible constants are
listed in the descriptions for each parameter.
In the following example, BLOCK_SCOPE is a constant that can be supplied for the parameter constant
VALIDATION_UNIT. Other constants listed in the description are FORM, RECORD, and ITEM.
SET_FORM_PROPERTY(’my_form’, VALIDATION_UNIT, BLOCK_SCOPE);
Individual built-in descriptions
The remainder of this chapter presents individual built-in descriptions. Each built-in is presented in the
following format or a subset of the format, as applicable:
Syntax
Describes the syntax of the built-in. If there are multiple formats for a Built-in then all formats are
shown. For example, if the target object of a built-in can be called by name or by object ID, then both
forms of syntax are displayed
Built-in Type Indicates whether the built-in is restricted or unrestricted
Returns Indicates the return value or data type of a built-in function
Enter Query Mode Indicates the capability to call the built-in during enter query mode.
Description
Indicates the general purpose and use of the built-in.
Parameters
Describes the parameters that are included in the syntax diagrams. Underlined parameters usually are the
default.
Individual built-in descriptions restrictions
Indicates any restrictions.
Individual built-in descriptions examples
Provides an actual example that can be used in conjunction with the syntax to develop a realistic call to
the built-in.

5
ABORT_QUERY built-in
Description
Closes a query that is open in the current block.
A query is open between the time the SELECT statement is issued and the time when all the rows have
been fetched from the database. In particular, a query is not open when the form is in Enter Query mode,
because the SELECT statement has not yet been issued.
Syntax
PROCEDURE ABORT_QUERY;
Built-in Type unrestricted procedure
Enter Query Mode yes
A query is open between the time the SELECT statement is issued and the time when all the rows have
been fetched from the database. In particular, a query is not open when the form is in Enter Query mode,
because the SELECT statement has not yet been issued.
Parameters
none
Usage Notes
ABORT_QUERY is not the equivalent of the Query, Cancel runtime default menu command. It does not
prevent the initial fetch from the database, but rather interrupts fetch processing, thus preventing
subsequent fetches.
ABORT_QUERY restrictions
Do not use ABORT_QUERY in the following triggers:
• On-Fetch. The On-Fetch trigger is provided for applications using transactional triggers to replace
default Form Builder functions when running against non-Oracle data sources. To signal that your
On-Fetch trigger is done fetching rows, exit the On-Fetch trigger without issuing the
CREATE_QUERIED_RECORD built-in.
• Pre-Query. The Pre-Query trigger fires before the query is open, so there is no open query to close
and ABORT_QUERY is ignored. To programmatically cancel Enter Query mode, call the built-in
EXIT_FORM, using a When-New-Record-Instance trigger to check a flag as follows:
IF (:global.cancel_query = ’Y’
and :system.mode = ’ENTER-QUERY’)
THEN
Exit_Form;
:global.cancel_query = ’N’;
END IF;
• Then set the flag to ’TRUE’ either from a Pre-Query trigger or an On-Error trigger that traps for the
FRM-40301 error.

6
ACTIVATE_SERVER built-in
Description
Activates an OLE server associated with an OLE container and prepares the OLE server to receive OLE
automation events from the OLE container.
Syntax
PROCEDURE ACTIVATE_SERVER
(item_id Item);
PROCEDURE ACTIVATE_SERVER
(item_name VARCHAR2);
Enter Query Mode no
Parameters
item_id Specifies the unique ID that Form Builder assigns to the item when created.
Use the FIND_ITEM built-in to return the ID to an appropriately typed
variable. The data type of the ID is Item.
item_name Specifies the name of the object created at design time. The data type of
the name is VARCHAR2 string.
Usage Notes
• The OLE container must contain an OLE object and the OLE Server must be available for
activation.
ACTIVATE_SERVER restrictions
Valid only on Microsoft Windows and Macintosh.
ACTIVATE_SERVER examples
/*
** Built-in: ACTIVATE_SERVER
** Example: Activates the OLE server associated with the object
** in the OLE container.
** trigger: When-Button-Pressed
*/
DECLARE
item_id ITEM;
item_name VARCHAR(25) := ’OLEITM’;
BEGIN
item_id := Find_Item(item_name);
IF Id_Null(item_id) THEN
message(’No such item: ’||item_name);
ELSE
Forms_OLE.Activate_Server(item_id);
END IF;
END;

7
ADD_GROUP_COLUMN built-in
Description
Adds a column of the specified type to the given record group.
Syntax
FUNCTION ADD_GROUP_COLUMN
(recordgroup_id RecordGroup,
groupcolumn_name VARCHAR2,
column_type NUMBER);
(recordgroup_name VARCHAR2,
column_type NUMBER);
(recordgroup_id, RecordGroup
column_type NUMBER,
column_width NUMBER);
column_type NUMBER,
column_width NUMBER);
Built-in Type unrestricted function
Returns GroupColumn
Parameters
recordgroup_id The unique ID that Form Builder assigns when it creates the group. The
data type of the ID is RecordGroup.
recordgroup_name The name you gave to the record group when creating it. The data type of
the name is VARCHAR2.
groupcolumn_name Specifies the name of the column. The data type of the column name is
VARCHAR2.
column_type Specifies the data type of the column. The allowable values are the
following constants:
CHAR_COLUMN Specify if the column can only accept VARCHAR2
data.
DATE_COLUMN Specify if the column can only accept DATE data.
LONG_COLUMN Specify if the column can only accept LONG data.
NUMBER_COLUMN Specify if the column can only accept NUMBER
data.

8
column_width If you specify CHAR_COLUMN as the column_type, you must indicate the
maximum length of the data. COLUMN_WIDTH cannot exceed 2000,
and must be passed as a whole number.
Error Conditions:
An error is returned under the following conditions:
• You enter the name of a non-existent record group.
• You specify the name for a group or a column that does not adhere to standard Oracle naming
conventions.
• You enter a column type other than CHAR, NUMBER, DATE, or LONG.
ADD_GROUP_COLUMN restrictions
• You must add columns to a group before adding rows.
• You cannot add a column to a group that already has rows; instead, delete the rows with
DELETE_GROUP_ROW, then add the column.
• You can only add columns to a group after it is created with a call to CREATE_GROUP.
• If the column corresponds to a database column, the width of CHAR_COLUMN-typed columns
cannot be less than the width of the corresponding database column.
• If the column corresponds to a database column, the width of CHAR_COLUMN-typed columns can
be greater than the width of the corresponding database column.
• Only columns of type CHAR_COLUMN require the width parameter.
• Performance is affected if a record group has a large number of columns.
• There can only be one LONG column per record group.
ADD_GROUP_COLUMN examples
/*
** Built-in: ADD_GROUP_COLUMN
** Example: Add one Number and one Char column to a new
** record group.
*/
PROCEDURE Create_My_Group IS
rg_name VARCHAR2(15) := ’My_Group’;
rg_id RecordGroup;
gc_id GroupColumn;
BEGIN
/*
** Check to see if Record Group already exists
*/
rg_id := Find_Group( rg_name );
/*
** If Not, then create it with one number column and one
** Char column
*/
IF Id_Null(rg_id) THEN
rg_id := Create_Group( rg_name );
gc_id := Add_Group_Column(rg_id, ’NumCol’,NUMBER_COLUMN);
gc_id := Add_Group_Column(rg_id, ’CharCol’,CHAR_COLUMN,15);
END IF;
END;

9
ADD_GROUP_ROW built-in
Description
Adds a row to the given record group.
Syntax
PROCEDURE ADD_GROUP_ROW
row_number NUMBER);
PROCEDURE ADD_GROUP_ROW
row_number NUMBER);
Parameters
row_number A whole number that specifies a row in the group. If you add a row to any
but the last position in a group, all rows below that are logically
renumbered. To add a row to the end of a group, use the
END_OF_GROUP constant.
Error Conditions:
Form Builder returns a runtime error given either of the following conditions:
• If you enter the name of a non-existent record group.
• If you supply a row number that is out of range or is invalid (for example, an alphabetic character).
ADD_GROUP_ROW restrictions
• A group can consist of 0 or more rows.
• You can add rows to a group only after it has been created and columns have been added.
• If you specify a row number greater than the number of rows already in the group (or a negative
number), the row is inserted at the end of the group.
• You cannot add rows to a static group without a query.
ADD_GROUP_ROW examples
/*
** Built-in: ADD_GROUP_ROW
** Example: Add ten rows to a new record group and populate.
*/

10
PROCEDURE Populate_My_Group IS
rg_name VARCHAR2(20) := ’My_Group’;
rg_col1 VARCHAR2(20) := rg_name||’.NumCol’;
rg_col2 VARCHAR2(20) := rg_name||’.CharCol’;
rg_id RecordGroup;
gc_id GroupColumn;
in_words VARCHAR2(15);
BEGIN
/*
** Check to see if Record Group already exists
*/
/*
** If it does, then clear all the rows from the group and
** populate ten rows with the numbers from 1..10 along
** with the equivalent number in words.
**
** Row# NumCol CharCol
** ---- ------ -------
** 1 1 one
** 2 2 two
** : : :
** 10 10 ten
*/
IF NOT Id_Null(rg_id) THEN
Delete_Group_Row( rg_id, ALL_ROWS );
FOR i IN 1..10 LOOP
/*
** Add the i-th Row to the end (bottom) of the
** record group, and set the values of the two cells
*/
in_words := TO_CHAR(TO_DATE(i,’YYYY’),’year’);
Add_Group_Row( rg_id, END_OF_GROUP );
Set_Group_Number_Cell( rg_col1, i, i);
Set_Group_Char_Cell( rg_col2, i, in_words);
END LOOP;
END IF;
END;

11
ADD_LIST_ELEMENT built-in
Description
Adds a single element to a list item.
Syntax
PROCEDURE ADD_LIST_ELEMENT
(list_name VARCHAR2,
list_index, NUMBER
list_label VARCHAR2,
list_value NUMBER);
PROCEDURE ADD_LIST_ELEMENT
(list_id ITEM,
list_index VARCHAR2,
list_label VARCHAR2,
list_value NUMBER);
Parameters
list_id Specifies the unique ID that Form Builder assigns when it creates the list
item. Use the FIND_ITEM built-in to return the ID to an appropriately
typed variable. The data type of the ID is ITEM.
list_name The name you gave to the list item when you created it. The data type of
list_index Specifies the list index value. The list index is 1 based.
list_label Specifies the VARCHAR2 string that you want displayed as the label of the
list element.
list_value The actual list element value you intend to add to the list item.
ADD_LIST_ELEMENT restrictions
For a base table list with the List Style property set to Poplist or T-list, Form Builder does not allow you
to add another values element when the block contains queried or changed records. Doing so causes an
error. This situation can occur if you have previously used DELETE_LIST_ELEMENT or
CLEAR_LIST to remove the other values element that was specified at design time by the Mapping of
Other Values list item property setting.
Note: The block status is QUERY when a block contains queried records. The block status is
CHANGED when a block contains records that have been either inserted or updated.
ADD_LIST_ELEMENT examples
/*
** Built-in: ADD_LIST_ELEMENT
** Example: Deletes index value 1 and adds the value "1994" to

12
** the list item called years when a button is
pressed.
*/
BEGIN
Delete_List_Element(’years’,1);
Add_List_Element(’years’, 1, ’1994’, ’1994’);
END;

13
ADD_OLEARGS built-in
Description
Establishes the type and value of an argument that will be passed to the OLE object’s method.
Syntax
PROCEDURE ADD_OLEARG
(newvar NUMBER, vtype VT_TYPE := VT_R8);
...or...
(newvar VARCHAR2, vtype VT_TYPE := VT_BSTR);
...or...
(newvar OLEVAR, vtype VT_TYPE := VT_VARIANT);
Parameters
newvar The value of this argument. Its type (NUMBER,
VARCHAR2, or OLEVAR) is its FORMS or PL/SQL data
type.
vtype The type of the argument as understood by the OLE method
For a NUMBER argument, the default is VT_TYPE :=
VT_R8.
For a VARCHAR2 argument, the default is VT_TYPE :=
VT_BSTR.
For an OLEVAR argument, the default is VT_TYPE :=
VT_VARIANT.
Usage Notes
A separate ADD_OLEARG call is needed for each argument to be passed. The calls should be in order,
starting with the first argument.
A list of the supported OLE VT_TYPEs can be found in OLE Variant Types .

14
ADD_PARAMETER built-in
Description
Adds parameters to a parameter list. Each parameter consists of a key, its type, and an associated value.
Syntax
PROCEDURE ADD_PARAMETER
(list VARCHAR2,
key VARCHAR2,
paramtype VARCHAR2,
value VARCHAR2);
PROCEDURE ADD_PARAMETER
(name VARCHAR2,
key VARCHAR2,
paramtype VARCHAR2,
value VARCHAR2);
Parameters
list or name Specifies the parameter list to which the parameter is assigned. The actual
parameter can be either a parameter list ID of type PARAMLIST, or the
VARCHAR2 name of the parameter list.
key The name of the parameter. The data type of the key is VARCHAR2.
paramtype Specifies one of the following two types:
TEXT_PARAMETER A VARCHAR2 string literal.
DATA_PARAMETER A VARCHAR2 string specifying the name of a
record group defined in the current form. When Form Builder passes a data
parameter to Report Builder or Graphics Builder, the data in the specified
record group can substitute for a query that Report Builder or Graphics
Builder would ordinarily execute to run the report or display.
value The actual value you intend to pass to the called module. If you are passing
a text parameter, the maximum length is 64K characters. Data type of the
value is VARCHAR2.
ADD_PARAMETER restrictions
• A parameter list can consist of 0 (zero) or more parameters.
• You cannot create a parameter list if one already exists; to do so will cause an error. To avoid this
error, use ID_NULL to check to see if a parameter list already exists before creating one. If a
parameter list already exists, delete it with DESTROY_PARAMETER_LIST before creating a new
list.
• You cannot add a parameter of type DATA_PARAMETER if the parameter list is being passed to
another form.

15
ADD_PARAMETER examples
/*
** Built-in: ADD_PARAMETER
** Example: Add a value parameter to an existing Parameter
** List ’TEMPDATA’, then add a data parameter to
** the list to associate named query ’DEPT_QUERY’
** with record group ’DEPT_RECORDGROUP’.
*/
DECLARE
pl_id ParamList;
BEGIN
pl_id := Get_Parameter_List(’tempdata’);
IF NOT Id_Null(pl_id) THEN
Add_Parameter(pl_id,’number_of_copies’,TEXT_PARAMETER,’19’);
Add_Parameter(pl_id, ’dept_query’, DATA_PARAMETER,
’dept_recordgroup’);
END IF;
END;

16
ADD_TREE_DATA built-in
Description
Adds a data set under the specified node of a hierarchical tree item.
Syntax
PROCEDURE ADD_TREE_DATA
(item_id ITEM,
node FTREE.NODE,
offset_type NUMBER,
offset NUMBER,
data_source NUMBER,
data VARCHAR2);
(item_name VARCHAR2,
node FTREE.NODE,
offset_type NUMBER,
offset NUMBER,
data_source NUMBER,
data VARCHAR2);
node FTREE.NODE,
offset_type NUMBER,
offset NUMBER,
data_source NUMBER,
data RECORDGROUP);
(item_id ITEM,
node FTREE.NODE,
offset_type NUMBER,
offset NUMBER,
data_source NUMBER,
data RECORDGROUP);
Enter Query Mode no
Parameters
item_name Specifies the name of the object created at design time.
The data type of the name is VARCHAR2 string.
Item_id Specifies the unique ID that Form Builder assigns to the
item when created. Use the FIND_ITEM built-in to
return the ID to an appropriately typed variable. The
data type of the ID is ITEM.
node Specifies a valid node.

17
offset_type Specifies the type of offset for the node. Possible values
are:
PARENT_OFFSET
SIBLING_OFFSET
If offset_type is PARENT_OFFSET, adds a data subset
immediately under the specified node at the location
among its children indicated by offset.
If offset_type is SIBLING_OFFSET, adds the new data
as a sibling to the specified node.
offset Indicates the position of the new node.
If offset_type is PARENT_OFFSET, then offset can be
either 1-n or LAST_CHILD.
If offset_type is SIBLING_OFFSET, then offset can be
either NEXT_NODE or PREVIOUS_NODE.
data_source Indicates the type of data source. Possible values are:
RECORD_GROUP
QUERY_TEXT
data Specifies the data to be added. If data source is
QUERY_TEXT, then data is the text of the query. If
data source is RECORD_GROUP, then data is an item
of type RECORDGROUP or the name of a record
group.
ADD_TREE_DATA examples
/*
** Built-in: ADD_TREE_DATA
*/
-- This code copies a set of values from a record group
-- and adds them as a top level node with any children
-- nodes specified by the structure of the record group.
-- The new top level node will be inserted as the last
-- top level node.
DECLARE
htree ITEM;
rg_data RECORDGROUP;
BEGIN
-- Find the tree itself.
htree := Find_Item(’tree_block.htree3’);
-- Find the record group.
rg_data := FIND_GROUP(’new_data_rg’);

18
-- Add the new node at the top level and children.
Ftree.Add_Tree_Data(htree,
Ftree.ROOT_NODE,
Ftree.PARENT_OFFSET,
Ftree.LAST_CHILD,
Ftree.RECORD_GROUP,
rg_data);
END;

19
ADD_TREE_NODE built-in
Description
Adds a data element to a hierarchical tree item.
Syntax
FUNCTION ADD_TREE_NODE
node FTREE.NODE,
offset_type NUMBER,
offset NUMBER,
state NUMBER,
label VARCHAR2,
icon VARCHAR2,
value VARCHAR2);
FUNCTION ADD_TREE_NODE
(item_id ITEM,
node FTREE.NODE,
offset_type NUMBER,
offset NUMBER,
state NUMBER,
label VARCHAR2,
icon VARCHAR2,
value VARCHAR2);
Returns NODE
Enter Query Mode no
Parameters
offset_type Specifies the type of offset for the node. Possible values
are:
PARENT_OFFSET
SIBLING_OFFSET
offset Indicates the position of the new node.

20
If offset_type is PARENT_OFFSET, then offset can be
either 1-n or LAST_CHILD.
If offset_type is SIBLING_OFFSET, then offset can be
either NEXT_NODE or PREVIOUS_NODE.
state Specifies the state of the node. Possible vaues are:
COLLAPSED_NODE
EXPANDED_NODE
LEAF_NODE
label The displayed text for the node.
icon The filename for the node’s icon.
value Specifies the VARCHAR2 value of the node.
ADD_TREE_NODE examples
/*
** Built-in: ADD_TREE_NODE
*/
-- This code copies a value from a Form item and
-- adds it to the tree as a top level node. The
-- value is set to be the same as the label.
DECLARE
htree ITEM;
top_node FTREE.NODE;
new_node FTREE.NODE;
item_value VARCHAR2(30);
BEGIN
-- Copy the item value to a local variable.
item_value := :wizard_block.new_node_data;
-- Add an expanded top level node to the tree
-- with no icon.
new_node := Ftree.Add_Tree_Node(htree,
Ftree.ROOT_NODE,
Ftree.PARENT_OFFSET,
Ftree.LAST_CHILD,
Ftree.EXPANDED_NODE,
item_value,
NULL,
item_value);
END;

21
APPLICATION_PARAMETER built-in
Description
Displays all the parameters associated with the current menu, and their current values, in the Enter
Parameter Values dialog box.
Syntax
PROCEDURE APPLICATION_PARAMETER;
Failure:
If no parameters are defined for the current menu, Form Builder
issues error message FRM-10201: No parameters needed.

22
BELL built-in
Description
Sets the terminal bell to ring the next time the terminal screen synchronizes with the internal state of the
form. This synchronization can occur as the result of internal processing or as the result of a call to the
SYNCHRONIZE built-in subprogram.
Syntax
PROCEDURE BELL;
Parameters
none
BELL examples
The following example rings the bell three times:
FOR i in 1..3 LOOP
BELL;
SYNCHRONIZE;
END LOOP;

23
BLOCK_MENU built-in
Description
Displays a list of values (LOV) containing the sequence number and names of valid blocks in your form.
Form Builder sets the input focus to the first enterable item in the block you select from the LOV.
Syntax
PROCEDURE BLOCK_MENU;
Built-in Type restricted procedure
Enter Query Mode yes; however, it is illegal to navigate out of the current block in Enter Query mode
Parameters
none
BLOCK_MENU examples
/*
** Built-in: BLOCK_MENU
** Example: Calls up the list of blocks in the form when the
** user clicks a button, and prints a message if
** the user chooses a new block out of the list to
** which to navigate.
*/
DECLARE
prev_blk VARCHAR2(40) := :System.Cursor_Block;
BEGIN
BLOCK_MENU;
IF :System.Cursor_Block <> prev_blk THEN
Message(’You successfully navigated to a new block!’);
END IF;
END;

24
BREAK built-in
Description
Halts form execution and displays the Debugger, while the current form is running in debug mode. From
the Debugger you can make selections to view the values of global and system variables. The BREAK
built-in is primarily useful when you need to inspect the state of a form during trigger execution.
Syntax
PROCEDURE BREAK;
Parameters
none
BREAK restrictions
If the current form is not running in debug mode, issuing a call to the BREAK built-in subprogram has
no effect.
BREAK examples
/*
** Built-in: BREAK
** Example: Brings up the debugging window for a particular
** value of the ’JOB’ item anytime the user
** changes records.
** trigger: When-New-Record-Instance
*/
BEGIN
IF :Emp.Job = ’CLERK’ THEN
Break;
Call_Form(’clerk_timesheet’);
Break;
END IF;
END;

25
CALL_FORM built-in
Description
Runs an indicated form while keeping the parent form active. Form Builder runs the called form with the
same Runform preferences as the parent form. When the called form is exited Form Builder processing
resumes in the calling form at the point from which you initiated the call to CALL_FORM.
Syntax
PROCEDURE CALL_FORM
(formmodule_name VARCHAR2);
PROCEDURE CALL_FORM
(formmodule_name VARCHAR2,
display NUMBER);
PROCEDURE CALL_FORM
display NUMBER,
switch_menu NUMBER);
PROCEDURE CALL_FORM
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER);
PROCEDURE CALL_FORM
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
data_mode NUMBER);
PROCEDURE CALL_FORM
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
paramlist_id PARAMLIST);
PROCEDURE CALL_FORM
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
paramlist_name VARCHAR2);
PROCEDURE CALL_FORM
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
data_mode NUMBER,
PROCEDURE CALL_FORM
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
data_mode NUMBER,

26
Parameters
formmodule_name The name of the called form (must be enclosed in single quotes). Datatype
is VARCHAR2.
display HIDE (The default.) Form Builder will hide the calling form before
drawing the called form.
NO_HIDE Form Builder will display the called form without hiding the
calling form.
switch_menu NO_REPLACE (The default.) Form Builder will keep the default menu
module of the calling form active for the called form.
DO_REPLACE Form Builder will replace the default menu module of the
calling form with the default menu module of the called form.
query_mode NO_QUERY_ONLY (The default.) Form Builder will run the indicated
form in normal mode, allowing the end user to perform inserts, updates,
and deletes from within the called form.
QUERY_ONLY Form Builder will run the indicated form in query-only
mode, allowing the end user to query, but not to insert, update, or delete
records.
data_mode NO_SHARE_LIBRARY_DATA (The default.) At runtime, Form
Builder will not share data between forms that have identical libraries
attached (at design time).
SHARE_LIBRARY_DATA At runtime, Form Builder will share data
between forms that have identical libraries attached (at design time).
paramlist_id The unique ID Form Builder assigns when it creates the parameter list.
You can optionally include a parameter list as initial input to the called
form. Datatype is PARAMLIST.
paramlist_name The name you gave the parameter list object when you defined it. Datatype
is VARCHAR2.
CALL_FORM restrictions
• Form Builder ignores the query_mode parameter when the calling form is running in
QUERY_ONLY mode. Form Builder runs any form that is called from a QUERY_ONLY form as a
QUERY_ONLY form, even if the CALL_FORM syntax specifies that the called form is to run in
NO_QUERY_ONLY (normal) mode.
• A parameter list passed to a form via CALL_FORM cannot contain parameters of type
DATA_PARAMETER. Only text parameters can be passed with CALL_FORM.
• Some memory allocated for CALL_FORM is not deallocated until the Runform session ends.
Exercise caution when creating a large stack of called forms.
• When you execute CALL_FORM in a Pre-Logon, On-Logon, or Post-Logon trigger, always specify
the DO_REPLACE parameter to replace the calling form’s menu with the called form’s menu.
Failing to specify DO_REPLACE will result in no menu being displayed for the called form. (An
alternative solution is to call the REPLACE_MENU built-in from a When-New-Form-Instance
trigger in the called form.)

27
CALL_FORM examples
/* Example 1:
** Call a form in query-only mode.
*/
BEGIN
CALL_FORM(’empbrowser’, no_hide, no_replace, query_only);
END;
/* Example 2:
** Call a form, pass a parameter list (if it exists)
*/
DECLARE
pl_id PARAMLIST;
theformname VARCHAR2(20);
BEGIN
theformname := ’addcust’;
/* Try to lookup the ’TEMPDATA’ parameter list */
pl_id := GET_PARAMETER_LIST(’tempdata’);
IF ID_NULL(pl_id) THEN
CALL_FORM(theformname);
ELSE
CALL_FORM(theformname,
hide,
no_replace,
no_query_only,
pl_id);
END IF;
CALL_FORM(’lookcust’, no_hide, do_replace, query_only);
END;

28
CALL_INPUT built-in
Description
Accepts and processes function key input from the end user. When CALL_INPUT is terminated, Form
Builder resumes processing from the point at which the call to CALL_INPUT occurred.
Syntax
PROCEDURE CALL_INPUT;
Enter Query Mode no
Parameters
none
CALL_INPUT restrictions
CALL_INPUT is included for compatibility with previous versions. You should not include this built-in
in new applications.

29
CALL_OLE
Description
Passes control to the identified OLE object’s method.
Syntax
PROCEDURE CALL_OLE
(obj OLEOBJ, memberid PLS_INTEGER);
Parameters
obj Name of the OLE object.
memberid Member ID of the method to be run.
Usage Notes
• Before this call is issued, the number, type, and value of the arguments must have been established,
using the INIT_OLEARGS and ADD_OLEARGS procedures.
• As a procedure call, no values are returned. To obtain a return value from the method, use one of
the function versions of this call (CALL_OLE_CHAR, _NUM, _OBJ, or _VAR).
• The method can raise a FORM_OLE_FAILURE exception. If so, you can use the function
LAST_OLE_EXCEPTION to obtain more information.

30
CALL_OLE_<returntype> built-in
Description
Passes control to the identified OLE object’s method. Receives a return value of the specified type.
There are four versions of the function (denoted by the value in returntype), one for each of the argument
types CHAR, NUM, OBJ, and VAR.
Syntax
FUNCTION CALL_OLE_CHAR
(obj OLEOBJ, memberid PLS_INTEGER)
RETURN returnval VARCHAR2;
...or...
FUNCTION CALL_OLE_NUM
RETURN returnval NUMBER;
...or...
FUNCTION CALL_OLE_OBJ
RETURN returnval OLEOBJ;
...or...
FUNCTION CALL_OLE_VAR
RETURN returnval OLEVAR;
Returns the method’s return value in the specified format
Parameters
obj Name of the OLE object.
memberid Member ID of the object’s method.
Usage Notes
• Before this call is issued, the number, type, and value of the arguments must have been established,
using the INIT-OLEARGS and ADD-OLEARGS procedures.
• The method can raise a FORM_OLE_FAILURE exception. If so, you can use the function
LAST_OLE_EXCEPTION to obtain more information.

31
CANCEL_REPORT_OBJECT built-in
Description
Cancels a long-running, asynchronous report. You should verify the report is canceled by checking the
status of the report using REPORT_OBJECT_STATUS .
Syntax
PROCEDURE CANCEL_REPORT_OBJECT
(report_id VARCHAR2
);
Parameters
report_id The VARCHAR2 value returned by the RUN_REPORT_OBJECT built-in.
This value uniquely identifies the report that is currently running either
locally or on a remote report server.
Usage Notes
• CANCEL_REPORT_OBJECT is useful only when a report is run asynchronously. You cannot
cancel an report that is run synchronously.

32
CHECKBOX_CHECKED built-in
Description
A call to the CHECKBOX_CHECKED function returns a BOOLEAN value indicating the state of the
given check box. If the item is not a check box, Form Builder returns the following error:
FRM-41038: Item <item_name> is not a check box.
Syntax
FUNCTION CHECKBOX_CHECKED
(item_id ITEM);
FUNCTION CHECKBOX_CHECKED
Returns BOOLEAN
A call to GET_ITEM_PROPERTY(item_name, ITEM_TYPE) can be used to verify the item type
before calling CHECKBOX_CHECKED.
To set the value of a check box programmatically, assign a valid value to the check box using standard
bind variable syntax.
Parameters
item_id Specifies the unique ID that Form Builder assigns to the item when it
creates it. The data type of the ID is ITEM.
item_name Specifies the string you defined as the name of the item at design time. The
data type of the name is VARCHAR2.
CHECKBOX_CHECKED restrictions
The CHECKBOX_CHECKED built-in returns a BOOLEAN value regarding the state of the given check
box. It does not return the actual value of the check box nor does it return the value you might have
indicated for the Mapping of Other Values property.
CHECKBOX_CHECKED examples
/*
** Built-in: CHECKBOX_CHECKED
** Example: Sets the query case-sensitivity of the item
** whose name is passed as an argument, depending
** on an indicator checkbox item.
*/
PROCEDURE Set_Case_Sensitivity( it_name VARCHAR2) IS
indicator_name VARCHAR2(80) := ’control.case_indicator’;
it_id Item;
BEGIN
it_id := Find_Item(it_name);

33
IF Checkbox_Checked(indicator_name) THEN
/*
** Set the item whose name was passed in to query case-
** sensitively (i.e., Case Insensitive is False)
*/
Set_Item_Property(it_id, CASE_INSENSITIVE_QUERY,
PROPERTY_FALSE );
ELSE
/*
** Set the item whose name was passed in to query case-
** insensitively (ie Case Insensitive True)
*/
Set_Item_Property(it_id,CASE_INSENSITIVE_QUERY,PROPERTY_TRUE);
END IF;
END;

34
CHECK_RECORD_UNIQUENESS built-in
Description
When called from an On-Check-Unique trigger, initiates the default Form Builder processing for
checking the primary key uniqueness of a record.
This built-in is included primarily for applications that will run against a non-ORACLE data source.
Syntax
PROCEDURE CHECK_RECORD_UNIQUENESS;
Parameters
none
CHECK_RECORD_UNIQUENESS restrictions
Valid only in an On-Check-Unique trigger.
CHECK_RECORD_UNIQUENESS examples
/*
** Built-in: CHECK_RECORD_UNIQUENESS
** Example: Perform Form Builder record uniqueness checking
** from the fields in the block that are marked as
** primary keys based on a global flag setup at
** startup by the form, perhaps based on a
** parameter.
** trigger: On-Check-Unique
*/
BEGIN
/*
** Check the global flag we set during form startup
*/
IF :Global.Using_Transactional_Triggers = ’TRUE’ THEN
User_Exit(’chkuniq block=EMP’);
/*
** Otherwise, do the right thing.
*/
ELSE
Check_Record_Uniqueness;
END IF;
END;

35
CLEAR_BLOCK built-in
Description
Causes Form Builder to remove all records from, or "flush," the current block.
Syntax
PROCEDURE CLEAR_BLOCK;
PROCEDURE CLEAR_BLOCK
(commit_mode NUMBER);
Enter Query Mode no
Parameters
If the end user has made changes to records in the current block that have not been posted or committed,
Form Builder processes the records, following the directions indicated by the argument supplied for the
commit_mode parameter:
commit_mode The optional action parameter takes the following possible constants as
arguments:
ASK_COMMIT Form Builder prompts the end user to commit the
changes during CLEAR_BLOCK processing.
DO_COMMIT Form Builder validates the changes, performs a commit,
and flushes the current block without prompting the end user.
NO_COMMIT Form Builder validates the changes and flushes the current
block without performing a commit or prompting the end user.
NO_VALIDATE Form Builder flushes the current block without
validating the changes, committing the changes, or prompting the end user.
CLEAR_BLOCK examples
/*
** Built-in: CLEAR_BLOCK
** Example: Clears the current block without validation, and
** deposits the primary key value which the user
** has typed into a global variable which a
** Pre-Query trigger will use to include it as a
** query criterion.
** trigger: When-New-Item-Instance
*/
BEGIN
IF :Emp.Empno IS NOT NULL THEN
:Global.Employee_Id := :Emp.Empno;
Clear_Block(No_Validate);
END IF;
END;
/*
** trigger: Pre-Query
*/

36
BEGIN
Default_Value(NULL, ’Global.Employee_Id’);
IF :Global.Employee_Id IS NOT NULL THEN
:Emp.Empno := :Global.Employee_Id;
END IF;
END;

37
CLEAR_EOL built-in
Description
Clears the current text item’s value from the current cursor position to the end of the line.
Syntax
PROCEDURE CLEAR_EOL;
CLEAR_EOL examples
/*
** Built-in: CLEAR_EOL
** Example: Clears out the contents of any number field when
** the end user navigates to it.
*/
BEGIN
IF Get_Item_Property(:System.trigger_Item, DATATYPE) =
’NUMBER’ THEN
Clear_Eol;
END IF;
END;

38
CLEAR_FORM built-in
Description
Causes Form Builder to remove all records from, or flush, the current form, and puts the input focus in
the first item of the first block.
Syntax
POROCEDURE CLEAR_FORM;
PROCEDURE CLEAR_FORM
PROCEDURE CLEAR_FORM
(commit_mode NUMBER,
rollback_mode NUMBER);
Enter Query Mode no
Parameters
If the end user has made changes to records in the current form or any called form, and those records
have not been posted or committed, Form Builder processes the records, following the directions
indicated by the argument supplied for the following parameter:
commit_mode ASK_COMMIT Form Builder prompts the end user to commit the
changes during CLEAR_FORM processing.
and flushes the current form without prompting the end user.
NO_COMMIT Form Builder validates the changes and flushes the current
form without performing a commit or prompting the end user.
NO_VALIDATE Form Builder flushes the current form without
validating the changes, committing the changes, or prompting the end user.
rollback_mode TO_SAVEPOINT Form Builder rolls back all uncommitted changes
(including posted changes) to the current form’s savepoint.
FULL_ROLLBACK Form Builder rolls back all uncommitted changes
(including posted changes) which were made during the current Runform
session. You cannot specify a FULL_ROLLBACK from a form that is
running in post-only mode. (Post-only mode can occur when your form
issues a call to another form while unposted records exist in the calling
form. To prevent losing the locks issued by the calling form, Form Builder
prevents any commit processing in the called form.)
CLEAR_FORM restrictions
If you use a PL/SQL ROLLBACK statement in an anonymous block or a user-defined subprogram, Form
Builder interprets that statement as a CLEAR_FORM built-in subprogram with no parameters.

39
CLEAR_FORM examples
/*
** Built-in: CLEAR_FORM
** Example: Clear any changes made in the current form,
** without prompting to commit.
*/
BEGIN
Clear_Form(No_Validate);
END;

40
CLEAR_ITEM built-in
Description
Clears the value from the current text item, regardless of the current cursor position, and changes the text
item value to NULL.
Syntax
PROCEDURE CLEAR_ITEM;
CLEAR_ITEM examples
/*
** Built-in: CLEAR_ITEM
** Example: Clear the current item if it does not represent
** the first day of a month.
*/
BEGIN
IF TO_CHAR(:Emp.Hiredate,’DD’) <> ’01’ THEN
Clear_Item;
Message(’This date must be of the form 01-MON-YY’);
END IF;
END;

41
CLEAR_LIST built-in
Description
Clears all elements from a list item. After Form Builder clears the list, the list will contain only one
element (the null element), regardless of the item’s Required property.
Syntax
PROCEDURE CLEAR_LIST
(list_id ITEM);
PROCEDURE CLEAR_LIST
(list_name VARCHAR2);
Parameters
Usage Notes
• Do not use the CLEAR_LIST built-in if the Mapping of Other Values property is defined and there
are queried records in the block. Doing so may cause Form Builder to be unable to display records
that have already been fetched.
For example, assume that a list item contains the values A, B, and C and the Mapping of Other Values
property is defined. Assume also that these values have been fetched from the database (a query is
open). At this point, if you clear the list with CLEAR_LIST, an error will occur because Form Builder
will attempt to display the previously fetched values (A, B, and C), but will be unable to because the
list was cleared.
Before clearing a list, close any open queries. Use the ABORT_QUERY built-in to close an open
query.
CHANGED when a block contains records that have been either inserted or updated (queried records
have been modified).
CLEAR_LIST restrictions
• For a Poplist or T-list-style list item, CLEAR_LIST will not clear the default value element or the
other values element from the list if they do not meet the criteria specified for deleting these
elements with DELETE_LIST_ELEMENT.

42
When either the default value or other values element cannot be deleted, CLEAR_LIST leaves these
elements in the list and clears all other elements. Refer to the restrictions on
DELETE_LIST_ELEMENT for more information.
CLEAR_LIST examples
/*
** Built-in: CLEAR_LIST
** Example: See POPULATE_LIST
*/

43
CLEAR_MESSAGE built-in
Description
Removes the current message from the screen message area.
Syntax
PROCEDURE CLEAR_MESSAGE;
CLEAR_MESSAGE examples
/*
** Built-in: CLEAR_MESSAGE
** Example: Clear the message from the message line.
*/
BEGIN
Message(’Working...’,No_Acknowledge);
SELECT current_tax
INTO :Emp.Tax_Rate
FROM tax_table
WHERE state_abbrev = :Emp.State;
Clear_Message;
END;

44
CLEAR_RECORD built-in
Description
Causes Form Builder to remove, or flush, the current record from the block, without performing
validation. If a query is open in the block, Form Builder fetches the next record to refill the block, if the
record space is no longer filled after removing the current record.
A database record that has been cleared is not processed as a delete by the next Post and Commit
Transactions process.
In a default master-detail block relation, clearing the master record causes all corresponding detail
records to be cleared without validation.
Syntax
PROCEDURE CLEAR_RECORD;
CLEAR_RECORD examples
/*
** Built-in: CLEAR_RECORD
** Example: Clear the current record if it’s not the last
** record in the block.
*/
BEGIN
IF :System.Last_Record = ’TRUE’ AND :System.Cursor_Record =
’1’ THEN
Message(’You cannot clear the only remaining entry.’);
Bell;
ELSE
Clear_Record;
END IF;
END;

45
CLOSE_FORM built-in
Description
In a multiple-form application, closes the indicated form. When the indicated form is the current form,
CLOSE_FORM is equivalent to EXIT_FORM.
Syntax
PROCEDURE CLOSE_FORM
(form_name VARCHAR2);
PROCEDURE CLOSE_FORM
(form_id FORMMODULE);
Enter Query Mode no
Parameters
form_name Specifies the name of the form to close as a VARCHAR2.
form_id The unique ID that is assigned to the form dynamically when it is
instantiated at runtime. Use the FIND_FORM built-in to an appropriately
typed variable. The data type of the form ID is FORMMODULE.
CLOSE_FORM restrictions
• You cannot close a form that is currently disabled as a result of having issued CALL_FORM to
invoke a modal called form.
• You cannot close a form that has called you. For example, if Form_A calls Form_B, then Form_B
cannot close Form_A.

46
CLOSE_SERVER built-in
Description
Deactivates the OLE server associated with an OLE container. Terminates the connection between an
OLE server and the OLE container.
Syntax
PROCEDURE CLOSE_SERVER
(item_id Item);
PROCEDURE CLOSE_SERVER
Enter Query Mode no
Parameters
CLOSE_SERVER restrictions
CLOSE_SERVER examples
/*
** Built-in: CLOSE_SERVER
** Example: Deactivates the OLE server associated with the
object
*/
DECLARE
item_id ITEM;
BEGIN
ELSE
Forms_OLE.Close_Server(item_id);
END IF;
END;

47
COMMIT_FORM built-in
Description
Causes Form Builder to update data in the database to match data in the form. Form Builder first
validates the form, then, for each block in the form, deletes, inserts, and updates to the database, and
performs a database commit. As a result of the database commit, the database releases all row and table
locks.
If the end user has posted data to the database during the current Runform session, a call to the
COMMIT_FORM built-in commits this data to the database.
Following a commit operation, Form Builder treats all records in all base-table blocks as if they are
queried records from the database. Form Builder does not recognize changes that occur in triggers that
fire during commit processing.
Syntax
PROCEDURE COMMIT_FORM;
Enter Query Mode no
COMMIT_FORM restrictions
If you use a PL/SQL COMMIT statement in an anonymous block or a form-level procedure, Form
Builder interprets that statement as a call to the COMMIT_FORM built-in.
COMMIT_FORM examples
Example 1
/*
** Built-in: COMMIT_FORM
** Example: If there are records in the form to be
** committed, then do so. Raise an error if the
** commit was not successful.
*/
BEGIN
/*
** Force validation to happen first
*/
Enter;
IF NOT Form_Success THEN
RAISE Form_trigger_Failure;
END IF;
/*
** Commit if anything is changed
*/
IF :System.Form_Status = ’CHANGED’ THEN
Commit_Form;
/*
** A successful commit operation sets Form_Status back
** to ’QUERY’.
*/

48
IF :System.Form_Status <> ’QUERY’ THEN
Message(’An error prevented your changes from being
committed.’);
Bell;
END IF;
END IF;
END;
Example 2
/*
** Built-in: COMMIT_FORM
** Example: Perform Form Builder database commit during commit
** processing. Decide whether to use this Built-in
** or a user exit based on a global flag setup at
**
** trigger: On-Commit
*/
BEGIN
/*
*/
User_Exit(’my_commit’);
/*
*/
ELSE
Commit_Form;
END IF;
END;

49
CONVERT_OTHER_VALUE built-in
Description
Converts the current value of a check box, radio group, or list item to the value associated with the
current check box state (Checked/Unchecked), or with the current radio group button or list item
element.
Syntax
PROCEDURE CONVERT_OTHER_VALUE
(item_id ITEM);
PROCEDURE CONVERT_OTHER_VALUE
Parameters
creates the item. The data type of the ID is ITEM.
item_name Specifies the VARCHAR2 string you defined as the name of the item at
design time.
CONVERT_OTHER_VALUE restrictions
If the item is not a check box, radio group, or list item, Form
Builder returns error FRM-41026: Item does not understand
operation. To avoid this error, determine the item type by
issuing a call to GET_ITEM_PROPERTY(item_name, ITEM_TYPE) before
calling CONVERT_OTHER_VALUE.
CONVERT_OTHER_VALUE examples
/*
** Built-in: CONVERT_OTHER_VALUE
** Example: Ensure that a particular checkbox’s value
** represents either the checked or unchecked
** value before updating the record.
** trigger: Pre-Update
*/
BEGIN
Convert_Other_Value(’Emp.Marital_Status’);
END;

50
COPY built-in
Description
Copies a value from one item or variable into another item or global variable. Use specifically to write a
value into an item that is referenced through the NAME_IN built-in. COPY exists for two reasons:
• You cannot use standard PL/SQL syntax to set a referenced item equal to a value.
• You might intend to programmatically place characters such as relational operators in NUMBER
and DATE fields while a form is in Enter Query mode.
Syntax
PROCEDURE COPY
(source VARCHAR2,
destination VARCHAR2);
Parameters
source The source is a literal value.
destinatioThe destination can be either a text item or another global variable.
Usage Notes
• When using COPY with date values, the format defined in the BUILTIN_DATE_FORMAT
property will be used if the DATE_FORMAT_COMPATIBILITY_MODE property is set to 5.0. If
this property is set to 4.5 COPY will expect date strings to be formatted using the default American
format.
• To use a text item as the source reference, you can use the following code:
COPY(NAME_IN(source), destination);
COPY restrictions
No validation is performed on a value copied to a text item. However, for all other types of items,
standard validation checks are performed on the copied value.
COPY examples
Example 1
/*
** Built-in: COPY
** Example: Force a wildcard search on the EmpNo item during
** query.
** trigger: Pre-Query
*/
DECLARE
cur_val VARCHAR2(40);
BEGIN

51
/*
** Get the value of EMP.EMPNO as a string
*/
cur_val := Name_In(’Emp.Empno’);
/*
** Add a percent to the end of the string.
*/
cur_val := cur_val || ’%’;
/*
** Copy the new value back into the item so Form Builder
** will use it as a query criterion.
*/
Copy( cur_val, ’Emp.Empno’ );
END;
Example 2
/*
** Built-in: COPY
** Example: Set the value of a global variable whose name is
** dynamically constructed.
*/
DECLARE
global_var_name VARCHAR2(80);
BEGIN
IF :Selection.Choice = 5 THEN
global_var_name := ’Storage_1’;
ELSE
global_var_name := ’Storage_2’;
END IF;
/*
** Use the name in the ’global_var_name’ variable as the
** name of the global variable in which to copy the
** current ’Yes’ value.
*/
COPY( ’Yes’, ’GLOBAL.’||global_var_name );
END;

52
COPY_REGION built-in
Description
Copies the selected region of a text item or image item from the screen and stores it in the paste buffer
until you cut or copy another selected region.
Syntax
PROCEDURE COPY_REGION;
Parameters
none
Usage Notes
Use COPY_REGION, as well as the other editing functions, on text and image items only. The cut and
copy functions transfer the selected region into the system clipboard until you indicate the paste target.
At that time, the cut or copied content is pasted onto the target location.

53
COPY_REPORT_OBJECT_OUTPUT built-in
Description
Copies the output of a report to a file.
Syntax
PROCEDURE COPY_REPORT_OBJECT_OUTPUT
(report_id VARCHAR2(20),
output_file VARCHAR2
);
Parameters
output_file The name of the file where the report output will be copied.
Usage Notes
• Use the Report Destination Type property to specify the format of the output file.
• To copy the output of a report from a remote machine, you must set the Report Destination Type
property to Cache.
COPY_REPORT_OBJECT_OUTPUT examples
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
BEGIN
repid := find_report_object(’report4’);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
if rep_status = ’FINISHED’ then
message(’Report Completed’);
copy_report_object_output(v_rep,’d:templocal.pdf’);
host(’netscape d:templocal.pdf’);
else
message(’Error when running report.’);
end if;
END;

54
COUNT_QUERY built-in
Description
In an On-Count trigger, performs the default Form Builder processing for identifying the number of rows
that a query will retrieve for the current block, and clears the current block. If there are changes to
commit in the block, Form Builder prompts the end user to commit them during COUNT_QUERY
processing. Form Builder returns the following message as a result of a valid call to COUNT_QUERY:
FRM-40355: Query will retrieve <number> records.
Syntax
PROCEDURE COUNT_QUERY;
Parameters
none
COUNT_QUERY restrictions
Valid only in triggers that allow restricted built-ins.
COUNT_QUERY examples
Example 1
/*
** Built-in: COUNT_QUERY
** Example: Display the number of records that will be
retrieved
** by the current query.
*/
BEGIN
Count_Query;
END;
Example 2
/*
** Built-in: COUNT_QUERY
** Example: Perform Form Builder count query hits processing.
** Decide whether to use this Built-in or a user
** exit based on a global flag setup at startup by
** the form, perhaps based on a parameter.
** trigger: On-Count
*/
BEGIN
/*
*/

55
/*
** User exit returns query hits count back into the
** CONTROL.HITS item.
*/
User_Exit(’my_count’);
/*
** Deposit the number of query hits in the appropriate
** block property so Form Builder can display its normal
** status message.
*/
Set_Block_Property(:System.trigger_Block,QUERY_HITS,
:control.hits);
/*
*/
ELSE
Count_Query;
END IF;
END;

56
CREATE_GROUP built-in
Description
Creates a non-query record group with the given name. The new record group has no columns and no
rows until you explicitly add them using the ADD_GROUP_COLUMN, the ADD_GROUP_ROW, and
the POPULATE_GROUP_WITH_QUERY built-ins.
Syntax
FUNCTION CREATE_GROUP
scope NUMBER,
array_fetch_size NUMBER);
Returns RecordGroup
Parameters
recordgroup_name The string you defined as the name of the record group at design time.
When Form Builder creates the record group object it also assigns the
object a unique ID of type RecordGroup. You can call the record group by
name or by ID in later calls to record group or record group column built-
in subprograms.
scope Specifies whether tlhe record group can be used only within the current
form or within every form in a multi-form application. Takes the following
constants as arguments:
FORM_SCOPE Indicates that the record group can by used only within the current
form. This is the default value.
GLOBAL_SCOPE Indicates that the record group is global, and that it can be used
within all forms in the application. Once created, a global record group persists for
the remainder of the runtime session.
array_fetch_size Specifies the array fetch size. The default array size is 20.
CREATE_GROUP examples
/*
** Built-in: CREATE_GROUP
** Example: Creates a record group and populates its values
** from a query.
*/
DECLARE
rg_name VARCHAR2(40) := ’Salary_Range’;
rg_id RecordGroup;
gc_id GroupColumn;
errcode NUMBER;
BEGIN
/*
** Make sure the record group does not already exist.

57
*/
rg_id := Find_Group(rg_name);
/*
** If it does not exist, create it and add the two
** necessary columns to it.
*/
rg_id := Create_Group(rg_name);
/* Add two number columns to the record group */
gc_id := Add_Group_Column(rg_id, ’Base_Sal_Range’,
NUMBER_COLUMN);
gc_id := Add_Group_Column(rg_id, ’Emps_In_Range’,
NUMBER_COLUMN);
END IF;
/*
** Populate group with a query
*/
errcode := Populate_Group_With_Query( rg_id,
’SELECT SAL-MOD(SAL,1000),COUNT(EMPNO) ’
||’FROM EMP ’
||’GROUP BY SAL-MOD(SAL,1000) ’
||’ORDER BY 1’);
END;

58
CREATE_GROUP_FROM_QUERY built-in
Description
Creates a record group with the given name. The record group has columns representing each column
you include in the select list of the query. Add rows to the record group with the POPULATE_GROUP
built-in.
Note: If you do not pass a formal column name or alias for a
column in the SELECT statement, Form Builder creates ICRGGQ with
a dummy counter <NUM>. This happens whenever the column name
would have been invalid. The first dummy name-counter always
takes the number one. For example, the query SELECT 1 + 1 FROM
DUAL would result in a column named ICRGGQ_1.
Syntax
FUNCTION CREATE_GROUP_FROM_QUERY
query VARCHAR2,
scope NUMBER,
array_fetch_size NUMBER);
Returns RecordGroup
Parameters
recordgroup_name The name of the record group. When Form Builder creates the record
group object it also assigns the object a unique ID of type RecordGroup.
query A valid SQL SELECT statement, enclosed in single quotes. Any columns
retrieved as a result of the query take the data types of the columns in the
table. If you restrict the query to a subset of the columns in the table, then
Form Builder creates only those columns in the record group
scope Specifies whether tlhe record group can be used only within the current
form or within every form in a multi-form application. Takes the following
constants as arguments:
FORM_SCOPE Indicates that the record group can by used only within the current
form. This is the default value.
GLOBAL_SCOPE Indicates that the record group is global, and that it can be used
within all forms in the application. Once created, a global record group persists for
the remainder of the runtime session.
array_fetch_size Specifies the array fetch size. The default array size is 20.
CREATE_GROUP_FROM_QUERY restrictions
• If a global record group is created from (or populated with) a query while executing form A, and the

59
query string contains bind variable references which are local to A (:block.item or
:PARAMETER.param), when form A terminates execution, the global query record group is
converted to a global non-query record group (it retains the data, but a subsequent call to
POPULATE_GROUP is considered an error).
CREATE_GROUP_FROM_QUERY examples
/*
** Built-in: CREATE_GROUP_FROM_QUERY
** Example: Create a record group from a query, and populate
it.
*/
DECLARE
rg_name VARCHAR2(40) := ’Salary_Range’;
rg_id RecordGroup;
errcode NUMBER;
BEGIN
/*
** Make sure group doesn’t already exist
*/
/*
** If it does not exist, create it and add the two
** necessary columns to it.
*/
rg_id := Create_Group_From_Query( rg_name,
’SELECT SAL-MOD(SAL,1000) BASE_SAL_RANGE,’
||’COUNT(EMPNO) EMPS_IN_RANGE ’
||’FROM EMP ’
||’GROUP BY SAL-MOD(SAL,1000) ’
||’ORDER BY 1’);
END IF;
/*
** Populate the record group
*/
errcode := Populate_Group( rg_id );
END;

60
CREATE_OLEOBJ built-in
Description
In its first form, creates an OLE object, and establishes the object’s persistence. In its second form, alters
the persistence of a previously-instantiated OLE object.
Syntax
FUNCTION CREATE_OLEOBJ
(name OLEOBJ, persistence_boolean := TRUE)
RETURN objpointer OLEOBJ;
...or...
FUNCTION CREATE_OLEOBJ
(localobject VARCHAR2,
persistence_boolean := TRUE)
RETURN objpointer OLEOBJ;
Returns pointer to the OLE object
Parameters
name The program ID of the OLE object’s server.
localobject A pointer to the OLE object whose status is to be
changed from non-persistent to persistent.
persistence_boolean A boolean value of TRUE establishes the object as
persistent. This is an optional parameter. If not
supplied, the default value is persistent.
Usage Notes
A persistent object exists across trigger invocations. A non-persistent object exists only as long as the
trigger that spawned the call runs.

61
CREATE_PARAMETER_LIST built-in
Description
Creates a parameter list with the given name. The parameter list has no parameters when it is created;
they must be added using the ADD_PARAMETER built-in subprogram. A parameter list can be passed
as an argument to the CALL_FORM, NEW_FORM, OPEN_FORM, and RUN_PRODUCT built-in
subprograms.
Syntax
FUNCTION CREATE_PARAMETER_LIST
(name VARCHAR2);
Returns ParamList
Parameters
name Specifies the VARCHAR2 name of the parameter list object.
When Form Builder creates the object, it assigns it a unique ID of type
PARAMLIST. You can call the parameter list by name or by ID in later
calls to parameter list-related built-in subprograms.
CREATE_PARAMETER_LIST restrictions
• You cannot create a parameter list named DEFAULT. DEFAULT is reserved for the parameter list
that Form Builder creates at the initiation of a runtime session.
• You cannot create a parameter list if one already exists; to do so will cause an error. To avoid this
error, use ID_NULL to check to see if a parameter list already exists before creating one. If a
parameter list already exists, delete it before creating a new list.
CREATE_PARAMETER_LIST examples
/*
** Built-in: CREATE_PARAMETER_LIST
** Example: Create a parameter list named ’TEMPDATA’. First
** make sure the list does not already exist, then
** attempt to create a new list. Signal an error
** if the list already exists or if creating the
** list fails.
*/
DECLARE
pl_id ParamList;
pl_name VARCHAR2(10) := ’tempdata’;
BEGIN
pl_id := Get_Parameter_List(pl_name);
IF Id_Null(pl_id) THEN
pl_id := Create_Parameter_List(pl_name);
IF Id_Null(pl_id) THEN
Message(’Error creating parameter list ’||pl_name);

62
END IF;
ELSE
Message(’Parameter list ’||pl_name||’ already exists!’);
END IF;
END;

63
CREATE_QUERIED_RECORD built-in
Description
When called from an On-Fetch trigger, creates a record on the block’swaiting list. The waiting list is an
intermediary record buffer that contains records that have been fetched from the data source but have not
yet been placed on the block’s list of active records. This built-in is included primarily for applications
using transactional triggers to run against a non-ORACLE data source.
Note that there is no way to remove a record from the waiting list. Consequently, the application must
ensure that there is data available to be used for populating the record programmatically.
Syntax
PROCEDURE CREATE_QUERIED_RECORD;
Enter Query Mode no
Parameters
none
CREATE_QUERIED_RECORD restrictions
• In blocks with a large number of records, this procedure can have side effects on disk I/O, memory
allocation, or both.
CREATE_QUERIED_RECORD examples
/*
** Built-in: CREATE_QUERIED_RECORD
** Example: Fetch the next N records into this block. Record
** count kept in Global.Record_Count.
** trigger: On-Fetch
*/
DECLARE
fetch_count NUMBER;
FUNCTION The_Next_Seq
RETURN NUMBER IS
CURSOR next_seq IS SELECT uniq_seq.NEXTVAL FROM DUAL;
tmp NUMBER;
BEGIN
OPEN next_seq;
FETCH next_seq INTO tmp;
CLOSE next_seq;
RETURN tmp;
END;
BEGIN
/*
** Determine how many records Form Builder is expecting us to
** fetch
*/
fetch_count := Get_Block_Property(’MYBLOCK’,RECORDS_TO_FETCH);
FOR i IN 1..fetch_count LOOP
/*

64
** Create the Queried Record into which we’ll deposit
** the values we’re about to fetch;
*/
Create_Queried_Record;
:Global.Record_Count := NVL(:Global.Record_Count,0)+1;
/*
** Populate the item in the queried record with a
** sequence function we declared above
*/
:myblock.numbercol := the_next_seq;
END LOOP;
END;

65
CREATE_RECORD built-in
Description
Creates a new record in the current block after the current record. Form Builder then navigates to the
new record.
Syntax
PROCEDURE CREATE_RECORD;
Enter Query Mode no
Parameters
none
CREATE_RECORD examples
/*
** Built-in: CREATE_RECORD
** Example: Populate new records in a block based on return
** values from a query
*/
PROCEDURE Populate_Rows_Into_Block( projid NUMBER) IS
CURSOR tempcur( cp_projid NUMBER ) IS
SELECT milestone_name, due_date
FROM milestone
WHERE project_id = cp_projid
ORDER BY due_date;
BEGIN
/* Add these records to the bottom of the block */
Last_Record;
/* Loop thru the records in the cursor */
FOR rec IN tempcur( projid ) LOOP
/*
** Create an empty record and set the current row’s
** Milestone_Name and Due_Date items.
*/
Create_Record;
: Milestone.Milestone_Name := rec.milestone_name;
: Milestone.Due_Date := rec.due_date;
END LOOP;
First_Record;
END;

66
CREATE_TIMER built-in
Description
Creates a new timer with the given name. You can indicate the interval and whether the timer should
repeat upon expiration or execute once only. When the timer expires, Form Builder fires the When-
Timer-Expired trigger.
Syntax
FUNCTION CREATE_TIMER
(timer_name VARCHAR2,
milliseconds NUMBER,
iterate NUMBER);
Returns Timer
Parameters
timer_name Specifies the timer name of up to 30 alphanumeric characters. The name
must begin with an alphabetic character. The data type of the name is
VARCHAR2.
milliseconds Specifies the duration of the timer in milliseconds. The range of values
allowed for this parameter is 1 to 2147483648 milliseconds. Values >
2147483648 will be rounded down to 2147483648. Note that only
positive numbers are allowed. The data type of the parameter is
NUMBER. See Restrictions below for more information.
iterate Specifies whether the timer should repeat or not upon expiration. Takes the
following constants as arguments:
REPEAT Indicates that the timer should repeat upon expiration. Default.
NO_REPEAT Indicates that the timer should not repeat upon expiration,
but is to be used once only, until explicitly called again.
CREATE_TIMER restrictions
• Values > 2147483648 will be rounded down to 2147483648.
• Milliseconds cannot be expressed as a decimal.
• No two timers can share the same name in the same form instance, regardless of case.
• If there is no When-Timer-Expired trigger defined at the execution of a timer, Form Builder returns
an error.
• If there is no When-Timer-Expired trigger defined at the execution of a timer, and the timer is a
repeating timer, subsequent repetitions are canceled, but the timer is retained.
• If there is no When-Timer-Expired trigger defined at the execution of a timer, and the timer is not a

67
repeating timer, the timer is deleted.
CREATE_TIMER examples
The following example creates a timer called EMP_TIMER, and sets it to 60 seconds and an iterate
value of NO_REPEAT:
DECLARE
timer_id Timer;
one_minute NUMBER(5) := 60000;
BEGIN
timer_id := CREATE_TIMER(’emp_timer’, one_minute,
NO_REPEAT);
END;

68
CREATE_VAR built-in
Description
Creates an empty, unnamed variant.
There are two versions of the function, one for scalars and the other for arrays.
Syntax
FUNCTION CREATE_VAR
(persistence BOOLEAN)
RETURN newvar OLEVAR;
...or...
FUNCTION CREATE_VAR
(bounds OLE_SAFEARRAYBOUNDS,
vtype VT_TYPE,
persistence BOOLEAN)
Returns the created OLE variant.
Parameters
persistence Controls the persistence of the variant after its creation. A
boolean value of TRUE establishes the variant as
persistent; a value of FALSE establishes the variant as
non-persistent.
This is an optional parameter. If not specified, the default
value is non-persistent.
bounds A PL/SQL table that specifies the dimensions to be given
to the created array.
For more information about the contents and layout of this
parameter and the type OLE_SAFEARRAYBOUNDS,
see ARRAY TYPES FOR OLE SUPPORT.
vtype The OLE variant type (VT_TYPE) of the elements in the
created array. If the array will contain mixed element
types, specify VT_VARIANT.
Usage Notes
• The created variant is untyped, unless it is an array -- in which case its elements have the type you
specify.
• The created variant is also without a value. Use the SET_VAR function to assign an initial value
and type to the variant.
• A persistent variant exists across trigger invocations. A non-persistent variant exists only as long as
the trigger that spawned the call runs. See also DESTROY_VARIANT

69
CUT_REGION built-in
Description
Removes a selected region of a text item or an image item from the screen and stores it in the paste
buffer until you cut or copy another selected region.
Syntax
PROCEDURE CUT_REGION;
Parameters
none
Usage Notes
Use CUT_REGION, as well as the other editing functions, on text and image items only. The cut and

70
DBMS_ERROR_CODE built-in
Description
Returns the error number of the last database error that was detected.
Syntax
FUNCTION DBMS_ERROR_CODE;
Parameters
none
Usage Notes
For recursive errors, this built-in returns the code of the first message in the stack, so the error text must
be parsed for numbers of subsequent messages.
DBMS_ERROR_CODE examples
/*
** Built-in: DBMS_ERROR_CODE,DBMS_ERROR_TEXT
** Example: Reword certain Form Builder error messages by
** evaluating the DBMS error code that caused them
** trigger: On-Error
*/
DECLARE
errcode NUMBER := ERROR_CODE;
dbmserrcode NUMBER;
dbmserrtext VARCHAR2(200);
BEGIN
IF errcode = 40508 THEN
/*
** Form Builder had a problem INSERTing, so
** look at the Database error which
** caused the problem.
*/
dbmserrcode := DBMS_ERROR_CODE;
dbmserrtext := DBMS_ERROR_TEXT;
IF dbmserrcode = -1438 THEN
/*
** ORA-01438 is "value too large for column"
*/
Message(’Your number is too large. Try again.’);
ELSIF dbmserrcode = -1400 THEN
/*
** ORA-01400 is "Mandatory column is NULL"
*/
Message(’You forgot to provide a value. Try again.’);
ELSE
/*
** Printout a generic message with the database
** error string in it.

71
*/
Message(’Insert failed because of ’||dbmserrtext);
END IF;
END IF;
END;

72
DBMS_ERROR_TEXT built-in
Description
Returns the message number (such as ORA-01438) and message text of the database error.
Syntax
FUNCTION DBMS_ERROR_TEXT;
Parameters
none
Usage Notes
You can use this function to test database error messages during exception handling routines.
DBMS_ERROR_TEXT returns the entire sequence of recursive errors.
DBMS_ERROR_TEXT examples
/*
** Built-in: DBMS_ERROR_CODE,DBMS_ERROR_TEXT
** Example: Reword certain Form Builder error messages by
** evaluating the DBMS error code that caused them
*/
DECLARE
errcode NUMBER := ERROR_CODE;
dbmserrcode NUMBER;
dbmserrtext VARCHAR2(200);
BEGIN
IF errcode = 40508 THEN
/*
** Form Builder had a problem INSERTing, so
** look at the Database error which
** caused the problem.
*/
dbmserrcode := DBMS_ERROR_CODE;
dbmserrtext := DBMS_ERROR_TEXT;
IF dbmserrcode = -1438 THEN
/*
** ORA-01438 is "value too large for column"
*/
Message(’Your number is too large. Try again.’);
ELSIF dbmserrcode = -1400 THEN
/*
** ORA-01400 is "Mandatory column is NULL"
*/
Message(’You forgot to provide a value. Try again.’);
ELSE
/*

73
** Printout a generic message with the database
** error string in it.
*/
Message(’Insert failed because of ’||dbmserrtext);
END IF;
END IF;
END;

74
DEBUG_MODE built-in
Description
Toggles debug mode on and off in a menu. When debug mode is on in a menu, Form Builder issues an
appropriate message when a menu item command executes.
Syntax
PROCEDURE DEBUG_MODE;
Parameters
none
DEBUG_MODE restrictions
The DEBUG_MODE applies only to a menu module. It does not place the form in Debug Mode.

75
DEFAULT_VALUE built-in
Description
Copies an indicated value to an indicated variable if the variable’s current value is NULL. If the
variable’s current value is not NULL, DEFAULT_VALUE does nothing. Therefore, for text items this
built-in works identically to using the COPY built-in on a NULL item. If the variable is an undefined
global variable, Form Builder creates the variable.
Syntax
PROCEDURE DEFAULT_VALUE
(value_string VARCHAR2,
variable_name VARCHAR2);
Parameters
value_string A valid VARCHAR2 string, variable, or text item containing a valid string.
variable_name A valid variable, global variable, or text item name. The data type of the
variable_name is VARCHAR2. Any object passed as an argument to this
built-in must be enclosed in single quotes.
DEFAULT_VALUE restrictions
The DEFAULT_VALUE built-in is not related to the Initial Value item property.
DEFAULT_VALUE examples
/*
** Built-in: DEFAULT_VALUE
** Example: Make sure a Global variable is defined by
** assigning some value to it with Default_Value
*/
BEGIN
/*
** Default the value of GLOBAL.Command_Indicator if it is
** NULL or does not exist.
*/
Default_Value(’***’,’global.command_indicator’);
/*
** If the global variable equals the string we defaulted
** it to above, then it must have not existed before
*/
IF :Global.Command_Indicator = ’***’ THEN
Message(’You must call this screen from the Main Menu’);
END IF;
END;

76
DELETE_GROUP built-in
Description
Deletes a programmatically created record group.
Syntax
PROCEDURE DELETE_GROUP
(recordgroup_id RecordGroup);
PROCEDURE DELETE_GROUP
(recordgroup_name VARCHAR2);
Parameters
DELETE_GROUP restrictions
This built-in cannot be used to delete a record group that was created at design time.
DELETE_GROUP examples
/*
** Built-in: DELETE_GROUP
** Example: Delete a programmatically created record group
*/
PROCEDURE Remove_Record_Group( rg_name VARCHAR2 ) IS
rg_id RecordGroup;
BEGIN
/*
** Make sure the Record Group exists before trying to
** delete it.
*/
IF NOT Id_Null(rg_id) THEN
Delete_Group( rg_id );
END IF;
END;

77
DELETE_GROUP_ROW built-in
Description
Deletes the indicated row or all rows of the given record group. Form Builder automatically decrements
the row numbers of all rows that follow a deleted row. When rows are deleted, the appropriate memory
is freed and available to Form Builder.
If you choose to delete all rows of the group by supplying the ALL_ROWS constant, Form Builder
deletes the rows, but the group still exists until you perform the DELETE_GROUP subprogram.
When a single row is deleted, subsequent rows are renumbered so that row numbers remain contiguous.
Syntax
PROCEDURE DELETE_GROUP_ROW
row_number NUMBER);
PROCEDURE DELETE_GROUP_ROW
row_number NUMBER);
Parameters
recordgroup_id The unique ID that Form Builder assigns the group when it creates it. The
recordgroup_name The name you gave to the record group when you created it. The data type
of the name is VARCHAR2.
row_number Specifies the row to be deleted from the record group. Rows are
automatically numbered from 1 to n. Row number parameter data type is
NUMBER.
ALL_ROWS Specifies that Form Builder is to delete all rows without
deleting the record group. ALL_ROWS is a constant.
DELETE_GROUP_ROW restrictions
This built-in cannot be used to delete rows from a static record group.
DELETE_GROUP_ROW examples
/*
** Built-in: DELETE_GROUP_ROW
** Example: Delete certain number of records from the tail
** of the specified record group.
*/
PROCEDURE Delete_Tail_Records( recs_to_del NUMBER,
rg_name VARCHAR2 ) IS
rg_id RecordGroup;

78
rec_count NUMBER;
BEGIN
/*
** Check to see if Record Group exists
*/
/*
** Get a count of the records in the record group
*/
rec_Count := Get_Group_Row_Count( rg_id );
IF rec_Count < recs_to_del THEN
Message(’There are only ’||TO_CHAR(rec_Count)||
’ records in the group.’);
END IF;
/*
** Loop thru and delete the last ’recs_to_del’ records
*/
FOR j IN 1..recs_to_del LOOP
Delete_Group_Row( rg_id, rec_Count - j + 1 );
END LOOP;
END;

79
DELETE_LIST_ELEMENT built-in
Description
Deletes a specific list element from a list item.
Syntax
PROCEDURE DELETE_LIST_ELEMENT
list_index NUMBER);
PROCEDURE DELETE_LIST_ELEMENT
(list_id, ITEM
list_index NUMBER);
Parameters
list_index Specifies the list index value. The list index is 1 based.
Usage Notes
• Do not use the DELETE_LIST_ELEMENT built-in if the Mapping of Other Values property is
defined and there are queried records in the block. Doing so may cause Form Builder to be unable
to display records that have already been fetched.
open). At this point, if you delete B from the list using DELETE_LIST_ELEMENT, an error will
occur because Form Builder will attempt to display the previously fetched values (A, B, and C), but
will be unable to because B was deleted from the list.
Before deleting a list element, close any open queries. Use the ABORT_QUERY built-in to close an
open query.
Note: A list does not contain an other values element if none was specified at design time or if it was
programmatically deleted from the list at runtime.
DELETE_LIST_ELEMENT restrictions
For a Poplist or T-list-style list item, Form Builder returns
error FRM-41331: Could not delete element from <list_item> if
you attempt to delete the default value element.
The default value element is the element whose label or value was specified at design time for the Initial
Value property setting.

80
For a Combobox list item, you can delete the default value element only if the Initial Value property was
set to an actual value, rather than an element label.
For a base table Poplist or T-list list item, Form Builder
returns error FRM-41331: Could not delete element from
<list_item> if you:
• attempt to delete the other values element when the block contains queried or changed records.
• attempt to delete any element from a list that does not contain an other values element when the
block contains queried or changed records.
CHANGED when a block contains records that have been either inserted or updated (queried records
have been modified).
DELETE_LIST_ELEMENT examples
/*
** Built-in: DELETE_LIST_ELEMENT
** Example: See ADD_LIST_ELEMENT
*/

81
DELETE_PARAMETER built-in
Description
Deletes the parameter with the given key from the parameter list.
Syntax
PROCEDURE DELETE_PARAMETER
(list VARCHAR2,
key VARCHAR2);
PROCEDURE DELETE_PARAMETER
(name VARCHAR2,
key VARCHAR2);
Parameters
list or name Specifies the parameter list, either by list ID or name. The actual parameter
can be either a parameter list ID of type PARAMLIST, or the
key The name of the parameter. The data type of the key is VARCHAR2.
DELETE_PARAMETER restrictions
• Deleting the last parameter from a list does not automatically delete the list itself. To delete the
parameter list, issue a call to the DESTROY_PARAMETER_LIST subprogram.
DELETE_PARAMETER examples
/*
** Built-in: DELETE_PARAMETER
** Example: Remove the ’NUMBER_OF_COPIES’ parameter from the
** already existing ’TEMPDATA’ parameter list.
*/
BEGIN
Delete_Parameter(’tempdata’,’number_of_copies’);
END;

82
DELETE_RECORD built-in
Description
When used outside an On-Delete trigger, removes the current record from the block and marks the record
as a delete. Records removed with this built-in are not removed one at a time, but are added to a list of
records that are deleted during the next available commit process.
If the record corresponds to a row in the database, Form Builder locks the record before removing it and
marking it as a delete.
If a query is open in the block, Form Builder fetches a record to refill the block if necessary. See also the
description for the CLEAR_RECORD built-in subprogram.
In an On-Delete trigger, DELETE_RECORD initiates the default Form Builder processing for deleting a
record during the Post and Commit Transaction process, as shown in Example 2 below.
Syntax
PROCEDURE DELETE_RECORD;
Enter Query Mode no
Parameters
none
DELETE_RECORD examples
Example 1
/*
** Built-in: DELETE_RECORD
** Example: Mark the current record in the current block for
** deletion.
*/
BEGIN
Delete_Record;
END;
Example 2
/*
** Built-in: DELETE_RECORD
** Example: Perform Form Builder delete record processing
** during commit-time. Decide whether to use this
** Built-in or a user exit based on a global flag
** setup at startup by the form, perhaps based on
** a parameter.
** trigger: On-Delete
*/
BEGIN
/*
*/
User_Exit(’my_delrec block=EMP’);

83
/*
*/
ELSE
Delete_Record;
END IF;
END;

84
DELETE_TIMER built-in
Description
Deletes the given timer from the form.
Syntax
PROCEDURE DELETE_TIMER
(timer_id Timer);
PROCEDURE DELETE_TIMER
(timer_name VARCHAR2);
Parameters
timer_id Specifies the unique ID that Form Builder assigns when it creates the timer,
specifically as a response to a successful call to the CREATE_TIMER
built-in. Use the FIND_TIMER built-in to return the ID to an
appropriately typed variable. That data type of the ID is Timer.
timer_name Specifies the name you gave the timer when you defined it. The data type
of the timer_name is VARCHAR2.
DELETE_TIMER restrictions
• If you delete a timer, you must issue a FIND_TIMER call before attempting to call ID_NULL to
check on availability of the timer object. For instance, the following example is incorrect because
the call to DELETE_TIMER does not set the value of the ID. In other words, the timer is deleted,
but the ID continues to exist, yet points to a non-existent timer, hence, it is not null.
-- Invalid Example
timer_id := Find_Timer(’my_timer’);
Delete_Timer(timer_id);
IF (ID_Null(timer_id))...
DELETE_TIMER examples
/*
** Built-in: DELETE_TIMER
** Example: Remove a timer after first checking to see if
** it exists
*/
PROCEDURE Cancel_Timer( tm_name VARCHAR2 ) IS
tm_id Timer;
BEGIN
tm_id := Find_Timer( tm_name );
IF NOT Id_Null(tm_id) THEN
Delete_Timer(tm_id);
ELSE
Message(’Timer ’||tm_name||’ has already been cancelled.’);
END IF;

86
DELETE_TREE_NODE built-in
Description
Removes the data element from the tree.
Syntax
PROCEDURE DELETE_TREE_NODE
node NODE);
PROCEDURE DELETE_TREE_NODE
(item_id ITEM,
node NODE);
Enter Query Mode no
Parameters
Usage Notes
Removing a branch node also removes all child nodes.
DELETE_TREE_NODE examples
/*
** Built-in: DELETE_TREE_NODE
*/
-- This code finds a node with the label "Zetie"
-- and deletes it and all of its children.
DECLARE
htree ITEM;
delete_node FTREE.NODE;
BEGIN

87
-- Find the node with a label of "Zetie".
-- Start searching from the root of the tree.
delete_node := Ftree.Find_Tree_Node(htree,
’Zetie’,
Ftree.FIND_NEXT,
Ftree.NODE_LABEL,
Ftree.ROOT_NODE,
Ftree.ROOT_NODE);
-- Delete the node and all of its children.
IF NOT Ftree.ID_NULL(delete_node) then
Ftree.Delete_Tree_Node(htree, delete_node);
END IF;
END;

88
DESTROY_PARAMETER_LIST built-in
Description
Deletes a dynamically created parameter list and all parameters it contains.
Syntax
PROCEDURE DESTROY_PARAMETER_LIST
(list VARCHAR2);
PROCEDURE DESTROY_PARAMETER_LIST
(name VARCHAR2);
Parameters
list or name Specifies the parameter list, either by list ID or name. The actual parameter
can be either a parameter list ID of type PARAMLIST, or the
Usage Notes:
When a parameter list is destroyed using DESTROY_PARAMETER_LIST the parameter list handle is
NOT set to NULL.
Use the GET_PARAMETER_LIST built-in to return the ID to a variable of the type PARAMLIST.
DESTROY_PARAMETER_LIST examples
/*
** Built-in: DESTROY_PARAMETER_LIST
** Example: Remove the parameter list ’tempdata’ after first
** checking to see if it exists
*/
DECLARE
pl_id ParamList;
BEGIN
pl_id := Get_Parameter_List(’tempdata’);
Destroy_Parameter_List(pl_id);
END IF;
END;

89
DESTROY_VARIANT built-in
Description
Destroys a variant that was created by the CREATE_VAR function.
Syntax
PROCEDURE DESTROY_VARIANT (variant OLEVAR);
Parameters
variant The OLE variant to be destroyed.

90
DISPATCH_EVENT built-in
Description
Specifies the dispatch mode for ActiveX control events. By default, all PL/SQL event procedures that are
associated with ActiveX events are restricted. This means that go_item cannot be called from within the
procedure code and OUT parameters are not observed. However, there are instances when the same
event may apply to multiple items and a go_item is necessary. This requires that the event be dispatched
as unrestricted. Using the On-Dispatch-Event trigger, you can call DISPATCH_EVENT to specify the
dispatch mode as either restricted or unrestricted. For more information about working with ActiveX
control events, see Responding to ActiveX Control Events in the online help system.
Syntax
PROCEDURE DISPATCH_EVENT
(sync NUMBER,
);
PROCEDURE DISPATCH_EVENT
);
Parameters
sync Specifies the dispatch mode as either restricted (RESTRICTED), or
unrestricted (RESTRICTED_ALLOWED).
DISPATCH_EVENT examples
/*
ON-DISPATCH-EVENT trigger
*/
BEGIN
IF :SYSTEM.CUSTOM_ITEM_EVENT = 4294966696 THEN
/*when event occurs, allow it to apply to different
items */
FORMS4W.DISPATCH_EVENT(RESTRICTED_ALLOWED);
ELSE
/*run the default, that does not allow applying any
other item */
FORMS4W.DISPATCH_EVENT(RESTRICTED);
END IF;
END;

91
DISPLAY_ERROR built-in
Description
Displays the Display Error screen if there is a logged error. When the operator presses a function key
while viewing the Display Error screen, Form Builder redisplays the form. If there is no error to display
when you call this built-in, Form Builder ignores the call and does not display the DISPLAY ERROR
screen.
Syntax
PROCEDURE DISPLAY_ERROR;
Parameters
none

92
DISPLAY_ITEM built-in
Description
Maintained for backward compatibility only. For new applications, you should use the
SET_ITEM_INSTANCE_PROPERTY built-in. DISPLAY_ITEM modifies an item’s appearance by
assigning a specified display attribute to the item. DISPLAY_ITEM has the side-effect of also changing
the appearance of any items that mirror the changed instance. SET_ITEM_INSTANCE_PROPERTY
does not change mirror items.
You can reference any item in the current form.
Any change made by a DISPLAY_ITEM built-in is effective until:
• the same item instance is referenced by another DISPLAY_ITEM built-in, or
• the same item instance is referenced by the SET_ITEM_INSTANCE_PROPERTY built-in (with
VISUAL_ATTRIBUTE property), or
• the instance of the item is removed (e.g., through a CLEAR_RECORD or a query), or
• you modify a record (whose status is NEW), navigate out of the record, then re-enter the record, or
• the current form is exited
Syntax
PROCEDURE DISPLAY_ITEM
(item_id ITEM,
attribute VARCHAR2);
PROCEDURE DISPLAY_ITEM
attribute VARCHAR2);
Parameters
creates the item. The data type of the ID is ITEM.
item_name Specifies the VARCHAR2 string you gave to the item when you created it.
attribute Specifies a named visual attribute that should exist. You can also specify a
valid attribute from your Oracle*Terminal resource file. Form Builder will
search for named visual attribute first. Note: You can specify Normal as
a method for applying the default attributes to an item, but only if your
form does not contain a visual attribute or logical (character mode or
otherwise) called Normal. You can also specify NULL as a method for
returning an item to its initial visual attributes (default, custom, or named).
DISPLAY_ITEM examples
/*
** Built-in: DISPLAY_ITEM

93
** Example: Change the visual attribute of each item in the
** current record.
*/
DECLARE
cur_itm VARCHAR2(80);
cur_block VARCHAR2(80) := :System.Cursor_Block;
BEGIN
cur_itm := Get_Block_Property( cur_block, FIRST_ITEM );
WHILE ( cur_itm IS NOT NULL ) LOOP
cur_itm := cur_block||’.’||cur_itm;
Display_Item( cur_itm, ’My_Favorite_Named_Attribute’);
cur_itm := Get_Item_Property( cur_itm, NEXTITEM );
END LOOP;
END;

94
DOWN built-in
Description
Navigates to the instance of the current item in the record with the next higher sequence number. If
necessary, Form Builder fetches a record. If Form Builder has to create a record, DOWN navigates to
the first navigable item in the record.
Syntax
PROCEDURE DOWN;
Enter Query Mode no
Parameters
none

95
DO_KEY built-in
Description
Executes the key trigger that corresponds to the specified built-in subprogram. If no such key trigger
exists, then the specified subprogram executes. This behavior is analogous to pressing the corresponding
function key.
Syntax
PROCEDURE DO_KEY
(built-in_subprogram_name VARCHAR2);
Parameters
built-in_subprogram_name Specifies the name of a valid built-in subprogram.
Built-in Key trigger Associated Function Key
BLOCK_MENU Key-MENU [Block Menu]
CLEAR_BLOCK Key-CLRBLK [Clear Block]
CLEAR_FORM Key-CLRFRM [Clear Form]
CLEAR_RECORD Key-CLRREC [Clear Record]
COMMIT_FORM Key-COMMIT [Commit]
COUNT_QUERY Key-CQUERY [Count Query Hits]
CREATE_RECORD Key-CREREC [Insert Record]
DELETE_RECORD Key-DELREC [Delete Record]
DOWN Key-DOWN [Down]
DUPLICATE_ITEM Key-DUP-ITEM [Duplicate Item]
DUPLICATE_RECORD Key-DUPREC [Duplicate Record]
EDIT_TEXTITEM Key-EDIT [Edit]
ENTER Key-ENTER [Enter]
ENTER_QUERY Key-ENTQRY [Enter Query]
EXECUTE_QUERY Key-EXEQRY [Execute Query]
EXIT_FORM Key-EXIT [Exit/Cancel]
HELP Key-HELP [Help]

96
LIST_VALUES Key-LISTVAL [List]
LOCK_RECORD Key-UPDREC [Lock Record]
NEXT_BLOCK Key-NXTBLK [Next Block]
NEXT_ITEM Key-NEXT-ITEM [Next Item]
NEXT_KEY Key-NXTKEY [Next Primary Key Fld]
NEXT_RECORD Key-NXTREC [Next Record]
NEXT_SET Key-NXTSET [Next Set of Records]
PREVIOUS_BLOCK Key-PRVBLK [Previous Block]
PREVIOUS_ITEM Key-PREV-ITEM [Previous Item]
PREVIOUS_RECORD Key-PRVREC [Previous Record]
PRINT Key-PRINT [Print]
SCROLL_DOWN Key-SCRDOWN [Scroll Down]
SCROLL_UP Key-SCRUP [Scroll Up]
UP Key-UP [Up]
DO_KEY restrictions
DO_KEY accepts built-in names only, not key names: DO_KEY(ENTER_QUERY). To accept a
specific key name, use the EXECUTE_TRIGGER built-in: EXECUTE_TRIGGER(’KEY_F11’).
DO_KEY examples
/*
** Built-in: DO_KEY
** Example: Simulate pressing the [Execute Query] key.
*/
BEGIN
Do_Key(’Execute_Query’);
END;

97
DUMMY_REFERENCE built-in
Description
Provides a mechanism for coding an explicit reference to a bind variable that otherwise would be
referred to only indirectly in a formula (or in a function or procedure called by the formula). Use
DUMMY_REFERENCE to ensure that a formula calculated item (that contains indirect references to
bind variables) will be marked for recalculation by Form Builder.
The expression can be an arbitrary expression of type Char, Number, or Date. Typically the expression
will consist of a single reference to a bind variable.
Note: DUMMY_REFERENCE need not be executed for the referenced bind variable to be recognized
by Form Builder (thereby causing the related formula calculated item to be marked for recalcuation).
Syntax
PROCEDURE DUMMY_REFERENCE(expression);
Parameters
none
DUMMY_REFERENCE restrictions
none

98
DUPLICATE_ITEM built-in
Description
Assigns the current item the same value as the instance of this item in the previous record.
Syntax
PROCEDURE DUPLICATE_ITEM;
Enter Query Mode no
Parameters
none
DUPLICATE_ITEM restrictions
A previous record must exist in your current session, or Form
Builder returns error FRM-41803: No previous record to copy
value from.

99
DUPLICATE_RECORD built-in
Description
Copies the value of each item in the record with the next lower sequence number to the corresponding
items in the current record. The current record must not correspond to a row in the database. If it does,
an error occurs.
Note: The duplicate record does not inherit the record status of the source record; instead, its record
status is INSERT.
Syntax
PROCEDURE DUPLICATE_RECORD;
Enter Query Mode no
Parameters
none
DUPLICATE_RECORD restrictions
A previous record must exist in your current session.
DUPLICATE_RECORD examples
/*
** Built-in: DUPLICATE_RECORD;
** Example: Make a copy of the current record and increment
** the "line_sequence" item by one.
*/
DECLARE
n NUMBER;
BEGIN
/*
** Remember the value of the ’line_sequence’ from the
** current record
*/
n := :my_block.line_sequence;
/*
** Create a new record, and copy all the values from the
** previous record into it.
*/
Create_Record;
Duplicate_Record;
/*
** Set the new record’s ’line_sequence’ to one more than
** the last record’s.
*/
:my_block.line_sequence := n + 1;
END;

100
EDIT_TEXTITEM built-in
Description
Invokes the Runform item editor for the current text item and puts the form in Edit mode.
Syntax
PROCEDURE EDIT_TEXTITEM;
PROCEDURE EDIT_TEXTITEM
(x NUMBER,
y NUMBER);
PROCEDURE EDIT_TEXTITEM
(x NUMBER,
y NUMBER,
width, NUMBER
height NUMBER);
Parameters
x Specifies the x coordinate on the screen where you want to place the upper
left corner of the pop-up item editor.
y Specifies the y coordinate on the screen where you want to place the upper
left corner of the pop-up item editor.
width Specifies the width of the entire editor window, including buttons.
height Specifies the height of the entire editor window, including buttons.
If you specify a height less than 6 character cells, or its equivalent, Form
Builder sets the height equal to 6.
You can use the optional EDIT_TEXTITEM parameters to specify the location and dimensions of the
pop-up window with which the item editor is associated. If you do not use these parameters, Form
Builder invokes the item editor with its default location and dimensions.
EDIT_TEXTITEM restrictions
• The Width must be at least wide enough to display the buttons at the bottom of the editor window.
EDIT_TEXTITEM examples
/*
** Built-in: EDIT_TEXTITEM
** Example: Determine the x-position of the current item
** then bring up the editor either on the left
** side or right side of the screen so as to not
** cover the item on the screen.
*/
DECLARE
itm_x_pos NUMBER;

101
BEGIN
itm_x_pos := Get_Item_Property(:System.Cursor_Item,X_POS);
IF itm_x_pos > 40 THEN
Edit_TextItem(1,1,20,8);
ELSE
Edit_TextItem(60,1,20,8);
END IF;
END;

102
ENFORCE_COLUMN_SECURITY built-in
Description
Executes default processing for checking column security on a database column. This built-in is
included primarily for applications that run against a non-ORACLE data source, and use transactional
triggers to replace default Form Builder transaction processing.
Default Check Column Security processing refers to the sequence of events that occurs when Form
Builder enforces column-level security for each block that has the Enforce Column Security block
property set Yes. To enforce column security, Form Builder queries the database to determine the base
table columns to which the current form operator has update privileges. For columns to which the
operator does not have update privileges, Form Builder makes the corresponding base table items in the
form non-updateable by setting the Update Allowed item property to No dynamically. By default, Form
Builder performs this operation at form startup, processing each block in sequence.
For more information, refer to Form Builder Advanced Techniques, Chapter 4, "Connecting to Non-
Oracle Data Sources."
Syntax
PROCEDURE ENFORCE_COLUMN_SECURITY
Usage Notes
You can include this built-in subprogram in the On-Column-Security trigger if you intend to augment the
behavior of that trigger rather than completely replace the behavior. For more information, refer to
Chapter , "Triggers," in this manual.
ENFORCE_COLUMN_SECURITY restrictions
Valid only in an On-Column-Security trigger.

103
ENTER built-in
Description
Validates data in the current validation unit. (The default validation unit is Item.)
Syntax
PROCEDURE ENTER;
Parameters
none
ENTER examples
/*
** Built-in: ENTER
** Example: Force Validation to occur before calling another
** form
*/
BEGIN
Enter;
END IF;
Call_Form(’newcust’);
END;

104
ENTER_QUERY built-in
Description
The behavior of ENTER_QUERY varies depending on any parameters
you supply.
Syntax
PROCEDURE ENTER_QUERY;
PROCEDURE ENTER_QUERY
(keyword_one VARCHAR2);
(keyword_two VARCHAR2);
(keyword_one VARCHAR2,
keyword_two VARCHAR2);
keyword_two VARCHAR2,
locking VARCHAR2);
Enter Query Mode yes (to redisplay the example record from the last query executed in the block)
Parameters
no parameters ENTER_QUERY flushes the current block and puts the
form in Enter Query mode. If there are changes to commit, Form
Builder prompts the operator to commit them during the
ENTER_QUERY process.
keyword_one ENTER_QUERY(ALL_RECORDS) performs the same actions
as ENTER_QUERY except that when EXECUTE_QUERY is invoked, Form
Builder fetches all of the selected records.
keyword_two ENTER_QUERY(FOR_UPDATE) performs the same actions
as ENTER_QUERY except that when EXECUTE_QUERY is invoked, Form
Builder attempts to lock all of the selected records
immediately.
keyword_one/ keyword_two ENTER_QUERY(ALL_RECORDS, FOR_UPDATE)
performs the same actions as ENTER_QUERY except that when
EXECUTE_QUERY is invoked, Form Builder attempts to lock all of
the selected records immediately and fetches all of the selected
records.
locking Can be set to NO_WAIT anytime that you use the FOR_UPDATE
parameter. When you use NO_WAIT, Form Builder displays a dialog to
notify the operator if a record cannot be reserved for update immediately.
Without the NO_WAIT parameter, Form Builder keeps trying to obtain a
lock without letting the operator cancel the process.
Use the NO_WAIT parameter only when running against a data source that
supports this functionality.

105
ENTER_QUERY restrictions
Use the ALL_RECORDS and FOR_UPDATE parameters with caution. Locking and fetching a large
number of rows can result in long delays due to the many resources that must be acquired to accomplish
the task.
ENTER_QUERY examples
/*
** Built-in: ENTER_QUERY
** Example: Go Into Enter-Query mode, and exit the form if
** the user cancels out of enter-query mode.
*/
BEGIN
Enter_Query;
/*
** Check to see if the record status of the first record
** is ’NEW’ immediately after returning from enter-query
** mode. It should be ’QUERY’ if at least one row was
** returned.
*/
IF :System.Record_Status = ’NEW’ THEN
Exit_Form(No_Validate);
END IF;
END;

106
ERASE built-in
Description
Removes an indicated global variable, so that it no longer exists, and releases the memory associated
with the global variable. Globals always allocate 255 bytes of storage. To ensure that performance is
not impacted more than necessary, always erase any global variable when it is no longer needed.
Syntax
PROCEDURE ERASE
(global_variable_name VARCHAR2);
Parameters
global_variable_name Specifies the name of a valid global variable.
ERASE examples
ERASE(’global.var’);

107
ERROR_CODE built-in
Description
Returns the error number of the Form Builder error.
Syntax
PROCEDURE ERROR_CODE;
Parameters
none
ERROR_CODE examples
/*
** Built-in: ERROR_CODE,ERROR_TEXT,ERROR_TYPE
** Example: Reword certain FRM error messages by checking
** the Error_Code in an ON-ERROR trigger
*/
DECLARE
errnum NUMBER := ERROR_CODE;
errtxt VARCHAR2(80) := ERROR_TEXT;
errtyp VARCHAR2(3) := ERROR_TYPE;
BEGIN
IF errnum = 40301 THEN
Message(’Your search criteria identified no matches...
Try Again.’);
ELSIF errnum = 40350 THEN
Message(’Your selection does not correspond to an
employee.’);
ELSE
/*
** Print the Normal Message that would have appeared
**
** Default Error Message Text Goes Here
*/
Message(errtyp||’-’||TO_CHAR(errnum)||’: ’||errtxt);
END IF;
END;

108
ERROR_TEXT built-in
Description
Returns the message text of the Form Builder error.
Syntax
FUNCTION ERROR_TEXT;
Description
Returns the message text of the Form Builder error.
Parameters
none
Usage Notes
You can use this function to test error messages during exception handling subprograms.
ERROR_TEXT examples
/*
*/
DECLARE
BEGIN
Message(’Your search criteria identified no matches...
Try Again.’);
Message(’Your selection does not correspond to an
employee.’);
ELSE
/*
**
*/
END IF;

109
ERROR_TYPE built-in
Description
Returns the error message type for the action most recently performed during the current Runform
session.
Syntax
FUNCTION ERROR_TYPE;
Returns ERROR_TYPE returns one of the following values for the error message type:
FRM Indicates an Form Builder error.
ORA Indicates an ORACLE error.
Parameters
none
Usage Notes
You can use this function to do one of the following:
• test the outcome of a user action, such as pressing a key, to determine processing within an On-Error
trigger
• test the outcome of a built-in to determine further processing within any trigger
To get the correct results in either type of test, you must perform the test immediately after the action
executes, before any other action occurs.
ERROR_TYPE examples
/*
*/
DECLARE
BEGIN
Message(’You cannot navigate to this non-displayed item...
Try again.’);
Message(’If you want to leave this block,
you must first cancel Enter Query mode.’);
ELSE
/*

110
**
*/
END IF;
END;

111
EXEC_VERB built-in
Description
Causes the OLE server to execute the verb identified by the verb name or the verb index. An OLE verb
specifies the action that you can perform on an OLE object.
Syntax
PROCEDURE EXEC_VERB
(item_id Item,
verb_index VARCHAR2);
PROCEDURE EXEC_VERB
(item_id Item,
verb_name VARCHAR2);
PROCEDURE EXEC_VERB
PROCEDURE EXEC_VERB
Enter Query Mode no
Parameters
verb_index Specifies the numeric index of a verb. Use the
Forms_OLE.Find_OLE_Verb built-in to obtain this value. The data type
of index is VARCHAR2 string.
verb_name Specifies the name of a verb. Use the Forms_OLE.Get_Verb_Name built-
in to obtain this value. The data type of the name is VARCHAR2 char.
EXEC_VERB restrictions
EXEC_VERB examples
/*
** Built-in: EXEC_VERB
** Example: Deactivates the OLE server associated with the
object
*/
DECLARE

112
item_id ITEM;
verb_cnt_str VARCHAR(20);
verb_cnt NUMBER;
verb_name VARCHAR(20);
loop_cntr NUMBER;
BEGIN
ELSE
verb_cnt_str := Forms_OLE.Get_Verb_Count(item_id);
verb_cnt := TO_NUMBER(verb_cnt_str);
FOR loop_cntr in 1..verb_cnt LOOP
verb_name := Forms_OLE.Get_Verb_Name(item_id,loop_cntr);
IF verb_name = ’Edit’ THEN
EXEC_VERB(item_id,verb_name);
END IF;
END LOOP;
END IF;
END;

113
EXECUTE_QUERY built-in
Description
Flushes the current block, opens a query, and fetches a number of selected records. If there are changes
to commit, Form Builder prompts the operator to commit them before continuing EXECUTE_QUERY
processing.
Syntax
PROCEDURE EXECUTE_QUERY;
PROCEDURE EXECUTE_QUERY
(keyword_one VARCHAR2);
(keyword_two VARCHAR2);
keyword_two VARCHAR2);
keyword_two VARCHAR2,
locking VARCHAR2);
Parameters
no parameters EXECUTE_QUERY flushes the current block, opens a
query, and fetches a number of selected records.
keyword_one EXECUTE_QUERY(ALL_RECORDS) performs the same
actions as EXECUTE_QUERY except that Form Builder fetches all of
the selected records.
keyword_two EXECUTE_QUERY(FOR_UPDATE) performs the same
actions as EXECUTE_QUERY except that Form Builder attempts to
lock all of the selected records immediately.
keyword_one/ keyword_two EXECUTE_QUERY(ALL_RECORDS, FOR_UPDATE)
performs the same actions as EXECUTE_QUERY except that Form
Builder attempts to lock all of the selected records immediately
and fetches all of the selected records.
locking Can be set to NO_WAIT anytime that you use the FOR_UPDATE
parameter. When you use NO_WAIT, Form Builder displays a dialog to
notify the operator if a record cannot be reserved for update immediately.
Without the NO_WAIT parameter, Form Builder keeps trying to obtain a
lock without letting the operator cancel the process.
Use the NO_WAIT parameter only when running against a data source that
supports this functionality.

114
EXECUTE_QUERY restrictions
Oracle Corporation recommends that you use the ALL_RECORDS and FOR_UPDATE parameters with
caution. Fetching a large number of rows could cause a long delay. Locking a large number of rows at
once requires many resources.
EXECUTE_QUERY examples
/*
** Built-in: EXECUTE_QUERY
** Example: Visit several blocks and query their contents,
** then go back to the block where original block.
*/
DECLARE
block_before VARCHAR2(80) := :System.Cursor_Block;
BEGIN
Go_Block(’Exceptions_List’);
Execute_Query;
Go_Block(’User_Profile’);
Execute_Query;
Go_Block(’Tasks_Competed’);
Execute_Query;
Go_Block( block_before );
END;

115
EXECUTE_TRIGGER built-in
Description
EXECUTE_TRIGGER executes an indicated trigger.
Syntax
PROCEDURE EXECUTE_TRIGGER
(trigger_name VARCHAR2);
Built-in Type restricted procedure (if the user-defined trigger calls any restricted built-in subprograms)
Note: EXECUTE_TRIGGER is not the preferred method for executing a user-named trigger: writing a
user-named subprogram is the preferred method.
Parameters
trigger_name Specifies the name of a valid user-named trigger.
Usage Notes
Because you cannot specify scope for this built-in, Form Builder always looks for the trigger starting at
the lowest level, then working up.
To execute a built-in associated with a key, use the DO_KEY built-in instead of EXECUTE_TRIGGER.
For example, rather than:
Execute_trigger (’KEY-NEXT-ITEM’);
Use instead:
Do_Key(’NEXT_ITEM’);
EXECUTE_TRIGGER restrictions
Although you can use EXECUTE_TRIGGER to execute a built-in trigger as well as a user-named
trigger, this usage is not recommended, because the default fail behavior follows a different rule than
when invoked automatically by Form Builder as part of default processing. For example, in default
processing, if the When-Validate-Item trigger fails, it raises an exception and stops the processing of the
form. However, if the When-Validate-Item trigger fails when it is invoked by EXECUTE_TRIGGER,
that failure does not stop the processing of the form, but only sets Form_Failure to FALSE on return
from the EXECUTE_TRIGGER built-in.
EXECUTE_TRIGGER examples
/*
** Built-in: EXECUTE_TRIGGER
** Example: Execute a trigger dynamically from the PL/SQL
** code of a Menu item, depending on a menu
** checkbox.
*/
DECLARE
Cur_Setting VARCHAR2(5);

116
Advanced_Mode BOOLEAN;
BEGIN
/*
** Check whether the ’Advanced’ menu item under the
** ’Preferences’ submenu is checked on or not.
*/
Cur_Setting := Get_Menu_Item_Property
(’Preferences.Advanced’,CHECKED);
/*
** If it is checked on, then Advanced_Mode is boolean
** true.
*/
Advanced_Mode := (Cur_Setting = ’TRUE’);
/*
** Run the appropriate trigger from the underlying form
**
*/
IF Advanced_Mode THEN
Execute_trigger(’Launch_Advanced_Help’);
ELSE
Execute_trigger(’Launch_Beginner_Help’);
END IF;
END;

117
EXIT_FORM built-in
Description
Provides a means to exit a form, confirming commits and specifying rollback action.
• In most contexts, EXIT_FORM navigates outside the form. If there are changes in the current form
that have not been posted or committed, Form Builder prompts the operator to commit before
continuing EXIT_FORM processing.
• If the operator is in Enter Query mode, EXIT_FORM navigates out of Enter Query mode, not out of
the form.
• During a CALL_INPUT, EXIT_FORM terminates the CALL_INPUT function.
Syntax
PROCEDURE EXIT_FORM;
PROCEDURE EXIT_FORM
PROCEDURE EXIT_FORM
(commit_mode NUMBER,
Parameters
commit_mode ASK_COMMIT Form Builder prompts the operator to commit the
changes during EXIT_FORM processing.
However, if RECORD_STATUS is INSERT but the record is not valid,
Form Builder instead asks the operator if the form should be closed. If the
operator says yes, the changes are rolled back before the form is closed.
and exits the current form without prompting the operator.
NO_COMMIT Form Builder validates the changes and exits the current
form without performing a commit or prompting the operator.
NO_VALIDATE Form Builder exits the current form without validating
the changes, committing the changes, or prompting the operator.
rollback_mode TO_SAVEPOINT Form Builder rolls back all uncommitted changes
(including posted changes) to the current form’s savepoint.
(including posted changes) that were made during the current Runform
form. To prevent losing the locks issued by the calling form, Form Builder

118
NO_ROLLBACK Form Builder exits the current form without rolling
back to a savepoint. You can leave the top level form without performing a
rollback, which means that you retain the locks across a NEW_FORM
operation. These locks can also occur when running Form Builder from an
external 3GL program. The locks remain in effect when Form Builder
returns control to the program.
Usage Notes
Because the default parameters of EXIT_FORM are ASK_COMMIT for commit_mode and
TO_SAVEPOINT for rollback_mode, invoking EXIT_FORM without specifying any parameters in
some contexts may produce undesired results. For example, if the form is in POST only mode and
EXIT_FORM is invoked without parameters, the user will be prompted to commit the changes.
However, regardless of the user’s input at that prompt, the default rollback_mode of TO_SAVEPOINT
rolls back the changes to the form despite a message confirming that changes have been made. To avoid
conflicts explicitly specify parameters.
EXIT_FORM examples
/*
** Built-in: EXIT_FORM and POST
** Example: Leave the called form, without rolling back the
** posted changes so they may be posted and
** committed by the calling form as part of the
** same transaction.
*/
BEGIN
Post;
/*
** Form_Status should be ’QUERY’ if all records were
** successfully posted.
*/
Message(’An error prevented the system from posting
changes’);
END IF;
/*
** By default, Exit_Form asks to commit and performs a
** rollback to savepoint. We’ve already posted, so we do
** not need to commit, and we don’t want the posted changes
** to be rolled back.
*/
Exit_Form(NO_COMMIT, NO_ROLLBACK);
END;

119
FETCH_RECORDS built-in
Description
When called from an On-Fetch trigger, initiates the default Form Builder processing for fetching records
that have been identified by SELECT processing.
Syntax
PROCEDURE FETCH_RECORDS;
Enter Query Mode no
Parameters
none
FETCH_RECORDS examples
/*
** Built-in: FETCH_RECORDS
** Example: Perform Form Builder record fetch processing
during
** query time. Decide whether to use this built-in
** or a user exit based on a global flag setup at
** parameter. The block property RECORDS_TO_FETCH
** allows you to know how many records Form Builder
** is expecting.
** trigger: On-Fetch
*/
DECLARE
numrecs NUMBER;
BEGIN
/*
*/
/*
** How many records is the form expecting us to
** fetch?
*/
numrecs := Get_Block_Property(’EMP’,RECORDS_TO_FETCH);
/*
** Call user exit to determine if there are any
** more records to fetch from its cursor. User Exit
** will return failure if there are no more
** records to fetch.
*/
User_Exit(’my_fetch block=EMP remaining_records’);
/*
** If there ARE more records, then loop thru
** and create/populate the proper number of queried
** records. If there are no more records, we drop through
** and do nothing. Form Builder takes this as a signal that

120
** we are done.
*/
IF Form_Success THEN
/* Create and Populate ’numrecs’ records */
FOR j IN 1..numrecs LOOP
/*
** User exit returns false if there are no more
** records left to fetch. We break out of the
** if we’ve hit the last record.
*/
User_Exit(’my_fetch block=EMP get_next_record’);
EXIT;
END IF;
END LOOP;
END IF;
/*
*/
ELSE
Fetch_Records;
END IF;
END;

121
FIND_ALERT built-in
Description
Searches the list of valid alerts in Form Builder. When the given alert is located, the subprogram returns
an alert ID. You must return the ID to an appropriately typed variable. Define the variable with a type
of Alert.
Syntax
FUNCTION FIND_ALERT
(alert_name VARCHAR2);
Returns Alert
Parameters
alert_name Specifies the VARCHAR2 alert name.
FIND_ALERT examples
/*
** Built-in: FIND_ALERT
** Example: Show a user-warning alert. If the user presses
** the OK button, then make REALLY sure they want
** to continue with another alert.
*/
DECLARE
al_id Alert;
al_button NUMBER;
BEGIN
al_id := Find_Alert(’User_Warning’);
IF Id_Null(al_id) THEN
Message(’User_Warning alert does not exist’);
ELSE
/*
** Show the warning alert
*/
al_button := Show_Alert(al_id);
/*
** If user pressed OK (button 1) then bring up another
** alert to confirm -- button mappings are specified
** in the alert design
*/
IF al_button = ALERT_BUTTON1 THEN
al_id := Find_Alert(’Are_You_Sure’);
IF Id_Null(al_id) THEN
Message(’The alert named: Are you sure? does not
exist’);
ELSE
al_button := Show_Alert(al_id);

122
IF al_button = ALERT_BUTTON2 THEN
Erase_All_Employee_Records;
END IF;
END IF;
END IF;
END IF;
END;

123
FIND_BLOCK built-in
Description
Searches the list of valid blocks and returns a unique block ID. You must define an appropriately typed
variable to accept the return value. Define the variable with a type of Block.
Syntax
FUNCTION FIND_BLOCK
(block_name VARCHAR2);
Returns Block
Parameters
block_name Specifies the VARCHAR2 block name.
FIND_BLOCK examples
/*
** Built-in: FIND_BLOCK
** Example: Return true if a certain blockname exists
*/
FUNCTION Does_Block_Exist( bk_name VARCHAR2 )
RETURN BOOLEAN IS
bk_id Block;
BEGIN
/*
** Try to locate the block by name
*/
bk_id := Find_Block( bk_name );
/*
** Return the boolean result of whether we found it.
** Finding the block means that its bk_id will NOT be NULL
*/
RETURN (NOT Id_Null(bk_id));
END;

124
FIND_CANVAS built-in
Description
Searches the list of canvases and returns a canvas ID when it finds a valid canvas with the given name.
You must define an appropriately typed variable to accept the return value. Define the variable with a
type of Canvas.
Syntax
FUNCTION FIND_CANVAS
(canvas_name VARCHAR2);
Returns Canvas
Parameters
canvas_name Specifies the VARCHAR2 canvas name you gave the canvas when defining
it.
FIND_CANVAS examples
DECLARE
my_canvas Canvas;
BEGIN
my_canvas := Find_Canvas(’my_canvas’);
END;

125
FIND_COLUMN built-in
Description
Searches the list of record group columns and returns a groupcolumn ID when it finds a valid column
with the given name. You must define an appropriately typed variable to accept the return value. Define
the variable with a type of GroupColumn.
Syntax
FUNCTION FIND_COLUMN
(recordgroup.groupcolumn_name VARCHAR2);
Returns GroupColumn
Parameters
recordgroup. groupcolumn_name Specifies the fully qualified VARCHAR2 record group column name.
FIND_COLUMN examples
/*
** Built-in: FIND_COLUMN
** Example: Get column IDs for three columns in a record
** group before performing multiple Get’s or Set’s
** of the record group’s column values
*/
PROCEDURE Record_Machine_Stats( mach_number NUMBER,
pph NUMBER,
temperature NUMBER) IS
rg_id RecordGroup;
col1 GroupColumn;
col2 GroupColumn;
col3 GroupColumn;
row_no NUMBER;
BEGIN
rg_id := Find_Group(’machine’);
col1 := Find_Column(’machine.machine_no’);
col2 := Find_Column(’machine.parts_per_hour’);
col3 := Find_Column(’machine.current_temp’);
/*
** Add a new row at the bottom of the ’machine’ record
** group, and make a note of what row number we just
** added.
*/
Add_Group_Row( rg_id, END_OF_GROUP);
row_no := Get_Group_Row_Count(rg_id);
Set_Group_Number_Cell(col1, row_no, mach_number);
Set_Group_Number_Cell(col2, row_no, pph);
Set_Group_Number_Cell(col3, row_no, temperature);
END;

126
FIND_EDITOR built-in
Description
Searches the list of editors and returns an editor ID when it finds a valid editor with the given name. You
must define an appropriately typed variable to accept the return value. Define the variable with a type of
Editor.
Syntax
FUNCTION FIND_EDITOR
(editor_name VARCHAR2);
Returns Editor
Parameters
editor_name Specifies a valid VARCHAR2 editor name.
FIND_EDITOR examples
/*
** Built-in: FIND_EDITOR
** Example: Find and show a user-defined editor
*/
DECLARE
ed_id Editor;
status BOOLEAN;
BEGIN
ed_id := Find_Editor(’Happy_Edit_Window’);
IF NOT Id_Null(ed_id) THEN
Show_Editor(ed_id, NULL, :emp.comments, status);
ELSE
Message(’Editor "Happy_Edit_Window" not found’);
END IF;
END;

127
FIND_FORM built-in
Description
Searches the list of forms and returns a form module ID when it finds a valid form with the given name.
type of Formmodule.
Syntax
FUNCTION FIND_FORM
Returns FormModule
Parameters
formmodule_name Specifies a valid VARCHAR2 form name.
FIND_FORM examples
/*
** Built-in: FIND_FORM
** Example: Find a form’s Id before inquiring about several
** of its properties
*/
DECLARE
fm_id FormModule;
tmpstr VARCHAR2(80);
BEGIN
fm_id := Find_Form(:System.Current_Form);
tmpstr := Get_Form_Property(fm_id,CURSOR_MODE);
tmpstr :=
tmpstr||’,’||Get_Form_Property(fm_id,SAVEPOINT_MODE);
Message(’Form is configured as: ’||tmpstr);
END;

128
FIND_GROUP built-in
Description
Searches the list of record groups and returns a record group ID when it finds a valid group with the
given name. You must define an appropriately typed variable to accept the return value. Define the
variable with a type of RecordGroup.
Syntax
FUNCTION FIND_GROUP
Returns RecordGroup
Parameters
recordgroup_name Specifies the valid VARCHAR2 record group name.
FIND_GROUP restrictions
Performance of this function depends upon the number of record groups.
FIND_GROUP examples
/*
** Built-in: FIND_GROUP
** Example: See CREATE_GROUP and DELETE_GROUP_ROW
*/

129
FIND_ITEM built-in
Description
Searches the list of items in a given block and returns an item ID when it finds a valid item with the given
name. You must define an appropriately typed variable to accept the return value. Define the variable
with a type of Item.
Syntax
FUNCTION FIND_ITEM
(block.item_name VARCHAR2);
Returns Item
Parameters
block_name. item_name Specifies the fully qualified item name. The data type of the name is
VARCHAR2.
FIND_ITEM examples
/*
** Built-in: FIND_ITEM
** Example: Find an item’s Id before setting several
** of its properties.
*/
PROCEDURE Hide_an_Item( item_name VARCHAR2, hide_it BOOLEAN) IS
it_id Item;
BEGIN
it_id := Find_Item(item_name);
IF Id_Null(it_id) THEN
Message(’No such item: ’||item_name);
ELSE
IF hide_it THEN
Set_Item_Property(it_id,VISIBLE,PROPERTY_FALSE);
ELSE
Set_Item_Property(it_id,VISIBLE,PROPERTY_TRUE);
Set_Item_Property(it_id,ENABLED,PROPERTY_TRUE);
Set_Item_Property(it_id,NAVIGABLE,PROPERTY_TRUE);
END IF;
END IF;
END;

130
FIND_LOV built-in
Description
Searches the list of LOVs and returns an LOV ID when it finds a valid LOV with the given name. You
LOV.
Syntax
FUNCTION FIND_LOV
(LOV_name VARCHAR2);
Returns LOV
Parameters
LOV_name Specifies the valid VARCHAR2 LOV name.
FIND_LOV examples
/*
** Built-in: FIND_LOV
** Example: Determine if an LOV exists before showing it.
*/
DECLARE
lv_id LOV;
status BOOLEAN;
BEGIN
lv_id := Find_LOV(’My_Shared_LOV’);
/*
** If the ’My_Shared_LOV’ is not part of the current form,
** then use the ’My_Private_LOV’ instead.
*/
IF Id_Null(lv_id) THEN
lv_id := Find_LOV(’My_Private_LOV’);
END IF;
status := Show_LOV(lv_id,10,20);
END;

131
FIND_MENU_ITEM built-in
Description
Searches the list of menu items and returns a menu item ID when it finds a valid menu item with the
given name. You must define an appropriately typed variable to accept the return value. Define the
variable with a type of MenuItem.
Syntax
FUNCTION FIND_MENU_ITEM
(menu_name.menu_item_name VARCHAR2);
Returns MenuItem
Parameters
menu_name. menu_item_name Specifies a valid fully-qualified VARCHAR2 menu item name.
FIND_MENU_ITEM examples
/*
** Built-in: FIND_MENU_ITEM
** Example: Find the id of a menu item before setting
** multiple properties
*/
PROCEDURE Toggle_AutoCommit_Mode IS
mi_id MenuItem;
val VARCHAR2(10);
BEGIN
mi_id := Find_Menu_Item(’Preferences.AutoCommit’);
/*
** Determine the current checked state of the AutoCommit
** menu checkbox item
*/
val := Get_Menu_Item_Property(mi_id,CHECKED);
/*
** Toggle the checked state
*/
IF val = ’TRUE’ THEN
Set_Menu_Item_Property(mi_id,CHECKED,PROPERTY_FALSE);
ELSE
Set_Menu_Item_Property(mi_id,CHECKED,PROPERTY_TRUE);
END IF;
END;

132
FIND_OLE_VERB built-in
Description
Returns an OLE verb index. An OLE verb specifies the action that you can perform on an OLE object,
and each OLE verb has a corresponding OLE verb index. The OLE verb index is returned as a
VARCHAR2 string and must be converted to NUMBER when used in FORMS_OLE.EXE_VERB. You
must define an appropriately typed variable to accept the return value.
Syntax
FUNCTION FIND_OLE_VERB
(item_id Item,
FUNCTION FIND_OLE_VERB
Returns VARCHAR2
Enter Query Mode no
Parameters
verb_name Specifies the name of an OLE verb. An OLE verb specifies the action that
you can perform on an OLE object. Use the Forms_OLE.Get_Verb_Name
built-in to obtain this value. The data type of the name is VARCHAR2
string.
FIND_OLE_VERB restrictions
FIND_OLE_VERB examples
/*
** Built-in: EXEC_VERB
** Example: Finds an OLE verb index for use with the
** Forms_OLE.Exec_Verb built-in.
*/
DECLARE
item_id ITEM;
verb_index_str VARCHAR(20);
verb_index NUMBER;

133
BEGIN
ELSE
verb_index_str := Forms_OLE.Find_OLE_Verb(item_id,’Edit’);
verb_index := TO_NUMBER(verb_index_str);
Forms_OLE.Exec_Verb(item_id,verb_index);
END IF;
END;

134
FIND_RELATION built-in
Description
Searches the list of relations and returns a relation ID when it finds a valid relation with the given name.
type of Relation.
Syntax
FUNCTION FIND_RELATION
(relation_name VARCHAR2);
Returns Relation
Parameters
relation_name Specifies a valid VARCHAR2 relation name.
FIND_RELATION examples
/*
** Built-in: FIND_RELATION
** Example: Find the id of a relation before inquiring about
** multiple properties
*/
FUNCTION Detail_of( Relation_Name VARCHAR2 )
RETURN VARCHAR2 IS
rl_id Relation;
BEGIN
rl_id := Find_Relation( Relation_Name );
/*
** Signal error if relation does not exist
*/
IF Id_Null(rl_id) THEN
Message(’Relation ’||Relation_Name||’ does not exist.’);
ELSE
RETURN Get_Relation_Property(rl_id,DETAIL_NAME);
END IF;
END;

135
FIND_REPORT_OBJECT built-in
Description
Returns the report_id for a specified report. You can use this ID as a parameter for other built-ins, such
as RUN_REPORT_OBJECT .
Syntax
FUNCTION FIND_REPORT_OBJECT
(report_name VARCHAR2
);
Returns report_id of data type REPORT
Parameters
report_name Specifies the unique name of the report to be found.
•
FIND_REPORT_OBJECT examples
DECLARE
BEGIN
....
END;

136
FIND_TAB_PAGE built-in
Description
Searches the list of tab pages in a given tab canvas and returns a tab page ID when it finds a valid tab
page with the given name. You must define a variable of type TAB_PAGE to accept the return value.
Syntax
FUNCTION FIND_TAB_PAGE
(tab_page_name VARCHAR2);
Returns tab_page
Parameters
tab_page_name The unique tab page name. Datatype is VARCHAR2. (Note: if multiple
tab canvases have tab pages with identical names, you must provide a
fully-qualified name for the tab page (i.e.,
MY_TAB_CVS.TAB_PAGE_1).
FIND_TAB_PAGE examples
/* Use FIND_TAB_PAGE to find the ID of the top-most tab
** page on tab canvas TAB_PAGE_1, then use the ID to set
** properties of the tab page:
*/
DECLARE
tp_nm VARCHAR2(30);
tp_id TAB_PAGE;
BEGIN
tp_nm := GET_CANVAS_PROPERTY(’tab_page_1’, topmost_tab_page);
tp_id := FIND_TAB_PAGE(tp_nm);
SET_TAB_PAGE_PROPERTY(tp_id, visible, property_true);
SET_TAB_PAGE_PROPERTY(tp_id, label, ’Order Info’);
END;

137
FIND_TIMER built-in
Description
Searches the list of timers and returns a timer ID when it finds a valid timer with the given name. You
Timer.
Syntax
FUNCTION FIND_TIMER
(timer_name VARCHAR2);
Returns Timer
Parameters
timer_name Specifies a valid VARCHAR2 timer name.
FIND_TIMER examples
/*
** Built-in: FIND_TIMER
** Example: If the timer exists, reset it. Otherwise create
** it.
*/
PROCEDURE Reset_Timer_Interval( Timer_Name VARCHAR2,
Timer_Intv NUMBER ) IS
tm_id Timer;
tm_interval NUMBER;
BEGIN
/*
** User gives the interval in seconds, the timer subprograms
** expect milliseconds
*/
tm_interval := 1000 * Timer_Intv;
/* Lookup the timer by name */
tm_id := Find_Timer(Timer_Name);
/* If timer does not exist, create it */
IF Id_Null(tm_id) THEN
tm_id := Create_Timer(Timer_Name,tm_interval,NO_REPEAT);
/*
** Otherwise, just restart the timer with the new interval
*/
ELSE
Set_Timer(tm_id,tm_interval,NO_REPEAT);
END IF;
END;

138
FIND_TREE_NODE built-in
Description
Finds the next node in the tree whose label or value matches the search string.
Syntax
FUNCTION FIND_TREE_NODE
search_string VARCHAR2,
search_type NUMBER,
search_by NUMBER,
search_root NODE,
start_point NODE);
FUNCTION FIND_TREE_NODE
(item_id ITEM,
search_string VARCHAR2,
search_type NUMBER,
search_by NUMBER,
search_root NODE,
start_point NODE);
Returns NODE
Enter Query Mode no
Parameters
search_strin
g
Specifies the VARCHAR2 search string.
search_type Specifies the NUMBER search type. Possible values are:
FIND_NEXT
FIND_NEXT_CHILD Searches just the children of the
search_root node.
search_by Specifies the NUMBER to search by. Possible values
are:
NODE_LABEL
NODE_VALUE

139
search_root Specifies the root of the search tree.
start_point Specifies the starting point in the NODE search.
FIND_TREE_NODE examples
/*
** Built-in: FIND_TREE_NODE
*/
-- This code finds a node with a label of "Doran"
-- within the subtree beginning with the a node
-- with a label of "Zetie".
DECLARE
htree ITEM;
find_node Ftree.NODE;
BEGIN
-- Find the node with a label "Zetie".
find_node := Ftree.Find_Tree_Node(htree, ’Zetie’,
Ftree.FIND_NEXT,
Ftree.NODE_LABEL, Ftree.ROOT_NODE,
Ftree.ROOT_NODE);
-- Find the node with a label "Doran"
-- starting at the first occurance of "Zetie".
find_node := Ftree.Find_Tree_Node(htree, ’Doran’,
Ftree.FIND_NEXT,
Ftree.NODE_LABEL, find_node, find_node);
IF NOT Ftree.ID_NULL(find_node) then
...
END IF;
END;

140
FIND_VA built-in
Description
Searches for the visual attributes of an item in a given block and returns the value of that attribute as a
text string.
Syntax
FUNCTION FIND_VA
(va_name PROPERTY);
Returns Visual Attribute
Parameters
va_name The name you gave the visual attribute when you created
it. The data type is VARCHAR2.

141
FIND_VIEW built-in
Description
Searches the list of canvases and returns a view ID when it finds a valid canvas with the given name.
type of ViewPort.
Syntax
FUNCTION FIND_VIEW
(viewcanvas_name VARCHAR2);
Returns ViewPort
Parameters
viewcanvas_name Specifies the VARCHAR2 name of the canvas.
FIND_VIEW examples
/*
** Built-in: FIND_VIEW
** Example: Change the visual attribute and display position
** of a stacked view before making it visible to
** the user.
*/
DECLARE
vw_id ViewPort;
BEGIN
vw_id := Find_View(’Sales_Summary’);
Set_Canvas_Property(’Sales_Summary’, VISUAL_ATTRIBUTE,
’Salmon_On_Yellow’);
Set_View_Property(vw_id, VIEWPORT_X_POS, 30);
Set_View_Property(vw_id, VIEWPORT_Y_POS, 5);
Set_View_Property(vw_id, VISIBLE, PROPERTY_TRUE);
END;

142
FIND_WINDOW built-in
Description
Searches the list of windows and returns a window ID when it finds a valid window with the given name.
type of Window.
Syntax
FUNCTION FIND_WINDOW
(window_name VARCHAR2);
Returns Window
Parameters
window_name Specifies the valid VARCHAR2 window name.
FIND_WINDOW examples
/*
** Built-in: FIND_WINDOW
** Example: Anchor the upper left corner of window2 at the
** bottom right corner of window1.
*/
PROCEDURE Anchor_Bottom_Right( Window2 VARCHAR2, Window1
VARCHAR2) IS
wn_id1 Window;
wn_id2 Window;
x NUMBER;
y NUMBER;
w NUMBER;
h NUMBER;
BEGIN
/* ** Find Window1 and get its (x,y) position, width,
** and height.
*/
wn_id1 := Find_Window(Window1);
x := Get_Window_Property(wn_id1,X_POS);
y := Get_Window_Property(wn_id1,Y_POS);
w := Get_Window_Property(wn_id1,WIDTH);
h := Get_Window_Property(wn_id1,HEIGHT);
/*
** Anchor Window2 at (x+w,y+h)
*/
Set_Window_Property(wn_id2,X_POS, x+w );
Set_Window_Property(wn_id2,Y_POS, y+h );
END;

143
FIRST_RECORD built-in
Description
Navigates to the first record in the block’s list of records.
Syntax
PROCEDURE FIRST_RECORD;
Enter Query Mode no
Parameters
none
FIRST_RECORD examples
/*
** Built-in: FIRST_RECORD
** Example: Have a button toggle between the first and last
** records in a block.
*/
BEGIN
/*
** If we’re not at the bottom, then go to the last record
*/
IF :System.Last_Record <> ’TRUE’ THEN
Last_Record;
ELSE
First_Record;
END IF;
END;

144
FORM_FAILURE built-in
Description
Returns a value that indicates the outcome of the action most recently performed during the current
Runform session.
Outcome Returned Value
success FALSE
failure TRUE
fatal error FALSE
If no action has executed in the current Runform session, FORM_FAILURE returns FALSE.
Use FORM_FAILURE to test the outcome of a built-in to determine further processing within any
trigger. To get the correct results, you must perform the test immediately after the action executes. That
is, another action should not occur prior to the test.
Note: "Another action" includes both built-ins and PL/SQL assignment statements. If another action
occurs, FORM_FAILURE may not reflect the status of the built-in you are testing, but of the other,
more recently executed action. A more accurate technique is, for example, when performing a
COMMIT_FORM, to check that the SYSTEM.FORM_STATUS variable is set to ’QUERY’ after the
operation is done.
Syntax
FUNCTION FORM_FAILURE;
Returns BOOLEAN
Parameters
none
FORM_FAILURE examples
/*
** Built-in: FORM_FAILURE
** Example: Determine if the most recently executed built-in
** failed.
*/
BEGIN
GO_BLOCK(’Success_Factor’);
/*
** If some validation failed and prevented us from leaving
** the current block, then stop executing this trigger.

145
**
** Generally it is recommended to test
** IF NOT Form_Success THEN ...
** Rather than explicitly testing for FORM_FAILURE
*/
IF Form_Failure THEN
END IF;
END;

146
FORM_FATAL built-in
Description
Returns the outcome of the action most recently performed during the current Runform session.
success FALSE
failure FALSE
fatal error TRUE
Use FORM_FATAL to test the outcome of a built-in to determine further processing within any trigger.
To get the correct results, you must perform the test immediately after the action executes. That is,
another action should not occur prior to the test.
Note: "Another action" includes both built-ins and PL/SQL assignment statements. If another action
occurs, FORM_FATAL may not reflect the status of the built-in you are testing, but of the other, more
recently executed action. A more accurate technique is, for example, when performing a
COMMIT_FORM, to check that the SYSTEM.FORM_STATUS variable is set to ’QUERY’ after the
operation is done.
Syntax
FUNCTION FORM_FATAL;
Return Type:
BOOLEAN
Parameters
none
FORM_FATAL examples
/*
** Built-in: FORM_FATAL
** Example: Check whether the most-recently executed built-in
** had a fatal error.
*/
BEGIN
User_Exit(’Calculate_Line_Integral control.start
control.stop’);
/*
** If the user exit code returned a fatal error, print a
** message and stop executing this trigger.

147
**
** Generally it is recommended to test **
** IF NOT FORM_SUCCESS THEN ... **
** Rather than explicitly testing for FORM_FATAL
*/
IF Form_Fatal THEN
Message(’Cannot calculate the Line Integral due to internal
error.’);
END IF;
END;

148
FORM_SUCCESS built-in
Description
Returns the outcome of the action most recently performed during the current Runform session.
success TRUE
failure FALSE
fatal error FALSE
Syntax
FUNCTION FORM_SUCCESS;
Return Type:
BOOLEAN
Parameters
none
Usage Notes
• Use FORM_SUCCESS to test the outcome of a built-in to determine further processing within any
trigger. To get the correct results, you must perform the test immediately after the action executes.
That is, another action should not occur prior to the test. "Another action" includes both built-ins
and PL/SQL assignment statements. If another action occurs, FORM_SUCCESS may not reflect
the status of the built-in you are testing, but of the other, more recently executed action.
• FORM_SUCCESS should not be used to test whether a COMMIT_FORM or POST built-in has
succeeded. Because COMMIT_FORM may cause many other triggers to fire, when you evaluate
FORM_SUCCESS it may not reflect the status of COMMIT_FORM but of some other, more
recently executed built-in. A more accurate technique is to check that the
SYSTEM.FORM_STATUS variable is set to ’QUERY’ after the operation is done.
• On Microsoft Windows NT, when using HOST to execute a 16-bit application, the
FORM_SUCCESS built-in will return TRUE whether the application succeeds or fails. This is a
Microsoft a Win32 issue. 32-bit applications and OS commands will correctly return TRUE if
executed sucessfully and FALSE if failed. Invalid commands will return FALSE.
• On Windows 95 platforms the FORM_SUCCESS built-in will always return TRUE for HOST
commands which fail. This includes calls to command.com or OS functions, any 16-bit DOS or

149
GUI application, or an invalid command. FORM_SUCCESS will return TRUE for 32-bit
applications executed sucessfully and FALSE if failed.
FORM_SUCCESS examples
/*
** Built-in: FORM_SUCCESS
** Example: Check whether the most-recently executed built-in
** succeeded.
*/
BEGIN
/*
** Force validation to occur
*/
Enter;
/*
** If the validation succeeded, then Commit the data.
**
*/
Commit;
Message(’Error prevented Commit’);
END IF;
END IF;
END;

150
FORMS_DDL built-in
Description
Issues dynamic SQL statements at runtime, including server-side PL/SQL and DDL.
Note: All DDL operations issue an implicit COMMIT and will end the current transaction without
allowing Form Builder to process any pending changes.
Syntax
FUNCTION FORMS_DDL
(statement VARCHAR2);
Parameters
statement Any string expression up to 32K:
a literal
an expression or a variable representing the text of a block of
dynamically created PL/SQL code
a DML statement or
a DDL statement
Usage Notes
Commit (or roll back) all pending changes before you issue the FORMS_DDL command. All DDL
operations issue an implicit COMMIT and will end the current transaction without allowing Form
Builder to process any pending changes, as well as losing any locks Form Builder may have acquired.
Some supplied stored procedures issue COMMIT or ROLLBACK commands as part of their logic.
Make sure all pending changes in the form are committed or rolled back before you call those built-ins.
Use the SYSTEM.FORM_STATUS variable to check whether there are pending changes in the current
form before you issue the FORMS_DDL command. (See Example 4.)
If you use FORMS_DDL to execute a valid PL/SQL block:
• Use semicolons where appropriate.
• Enclose the PL/SQL block in a valid BEGIN/END block structure.
• Do not end the PL/SQL block with a slash.
• Line breaks, while permitted, are not required.
If you use FORMS_DDL to execute a single DML or DDL statement:
• Omit the trailing semicolon to avoid an invalid character error.
To check whether the statement issued using FORMS_DDL executed correctly, use the
FORM_SUCCESS or FORM_FAILURE Boolean functions. If the statement did not execute correctly,
check the error code and error text using DBMS_ERROR_CODE and DBMS_ERROR_TEXT. Note
that the values of DBMS_ERROR_CODE and DBMS_ERROR_TEXT are not automatically reset

151
following successful execution, so their values should only be examined after an error has been detected
by a call to FORM_SUCCESS or FORM_FAILURE.
FORMS_DDL restrictions
The statement you pass to FORMS_DDL may not contain bind variable references in the string, but the
values of bind variables can be concatenated into the string before passing the result to FORMS_DDL.
For example, this statement is not valid:
Forms_DDL (’Begin Update_Employee (:emp.empno); End;’);
However, this statement is valid, and would have the desired effect:
Forms_DDL (’Begin Update_Employee (’||TO_CHAR(:emp.empno)
||’);End;’);
However, you could also call a stored procedure directly, using Oracle8’s shared SQL area over multiple
executions with different values for emp.empno:
Update_Employee (:emp.empno);
SQL statements and PL/SQL blocks executed using FORMS_DDL cannot return results to Form Builder
directly. (See Example 4.)
In addition, some DDL operations cannot be performed using FORMS_DDL, such as dropping a table or
database link, if Form Builder is holding a cursor open against the object being operated upon.
FORMS_DDL examples
Example 1
/*
** Built-in: FORMS_DDL
** Example: The expression can be a string literal.
*/
BEGIN
Forms_DDL(’create table temp(n NUMBER)’);
Message (’Table Creation Failed’);
ELSE
Message (’Table Created’);
END IF;
END;
Example 2
/*
** Example: The string can be an expression or variable.
** Create a table with n Number columns.
** TEMP(COL1, COL2, ..., COLn).
*/
PROCEDURE Create_N_Column_Number_Table (n NUMBER) IS
my_stmt VARCHAR2(2000);
BEGIN
my_stmt := ’create table tmp(COL1 NUMBER’;
FOR I in 2..N LOOP
my_stmt := my_stmt||’,COL’||TO_CHAR(i)||’ NUMBER’;
END LOOP;
my_stmt := my_stmt||’)’;
/*
** Now, create the table...

152
*/
Forms_DDL(my_stmt);
Message (’Table Creation Failed’);
ELSE
Message (’Table Created’);
END IF;
END;
Example 3:
/*
** Example: The statement parameter can be a block
** of dynamically created PL/SQL code.
*/
DECLARE
procname VARCHAR2(30);
BEGIN
IF :global.flag = ’TRUE’ THEN
procname := ’Assign_New_Employer’;
ELSE
procname := ’Update_New_Employer’;
END IF;
Forms_DDL(’Begin ’|| procname ||’; End;’);
Message (’Employee Maintenance Failed’);
ELSE
Message (’Employee Maintenance Successful’);
END IF;
END;
Example 4:
/*
** Example: Issue the SQL statement passed in as an argument,
** and return a number representing the outcome of
** executing the SQL statement.
** A result of zero represents success.
*/
FUNCTION Do_Sql (stmt VARCHAR2, check_for_locks BOOLEAN := TRUE)
RETURN NUMBER
IS
SQL_SUCCESS CONSTANT NUMBER := 0;
BEGIN
IF stmt IS NULL THEN
Message (’DO_SQL: Passed a null statement.’);
RETURN SQL_SUCCESS;
END IF;
IF Check_For_Locks AND :System.Form_Status = ’CHANGED’ THEN
Message (’DO_SQL: Form has outstanding locks pending.’);
RETURN SQL_SUCCESS;
END IF;
Forms_DDL(stmt);
RETURN SQL_SUCCESS;
ELSE
RETURN Dbms_Error_Code;
END IF;
END;

153
GENERATE_SEQUENCE_NUMBER built-in
Description
Initiates the default Form Builder processing for generating a unique sequence number when a record is
created. When a sequence object is defined in the database, you can reference it as a default value for an
item by setting the Initial Value property to SEQUENCE.my_seq.NEXTVAL. By default, Form Builder
gets the next value from the sequence whenever a record is created. When you are connecting to a non-
ORACLE data source, you can include a call to this built-in in the On-Sequence-Number trigger
Syntax
PROCEDURE GENERATE_SEQUENCE_NUMBER;
Parameters
none
GENERATE_SEQUENCE_NUMBER restrictions
Valid only in an On-Sequence-Number trigger.
GENERATE_SEQUENCE_NUMBER examples
/*
** Built-in: GENERATE_SEQUENCE_NUMBER
** Example: Perform Form Builder standard sequence number
** processing based on a global flag setup at
** parameter.
** trigger: On-Sequence-Number
*/
BEGIN
/*
** Check the global flag we setup at form startup
*/
User_Exit(’my_seqnum seq=EMPNO_SEQ’);
/*
*/
ELSE
Generate_Sequence_Number;
END IF;
END;

154
GET_APPLICATION_PROPERTY built-in
Description
Returns information about the current Form Builder application. You must call the built-in once for each
value you want to retrieve.
Syntax
FUNCTION GET_APPLICATION_PROPERTY
(property NUMBER);
Returns VARCHAR2
Parameters
property Specify one of the following constants to return information about your
application:
APPLICATION_INSTANCE Returns the pointer value of an instance
handle. Only applies to the Microsoft Windows platform. For all other
platforms, Form Builder returns NULL.
BUILTIN_DATE_FORMAT Returns the current value of the Builtin
date format mask (which is held in the Builtin_Date_Format property).
CALLING_FORM Returns the name of the calling form if the current
form was invoked by the CALL_FORM built-in. If the current form is not
a called form, Form Builder returns NULL.
CONNECT_STRING Returns the database connect string of the current
operator. If the current operator does not have a connect string, Form
Builder returns NULL.
CURRENT_FORM Returns the .FMX file name of the form currently
being executed.
CURRENT_FORM_NAME Returns the name of the current form as
indicated by the form module Name property.
CURSOR_STYLE Returns the name of the current cursor style property.
Valid VARCHAR2 return values are BUSY, CROSSHAIR, DEFAULT,
HELP, and INSERTION.
DATASOURCE Returns the name of the database that is currently in use.
Valid return values are NULL, ORACLE, DB2, NONSTOP, TERADATA,
NCR/3600/NCR/3700, and SQLSERVER. This call returns the database
name only for connections established by Form Builder, not for connections
established by On-Logon triggers.
DATE_FORMAT_COMPATIBILITY_MODE Returns the compatibility
setting contained in this property.

155
DISPLAY_HEIGHT Returns the height of the display. The size of each
unit depends on how you defined the Coordinate System property for the
form module.
DISPLAY_WIDTH Returns the width of the display. The size of each
unit depends on how you defined the Coordinate System property for the
form module.
ERROR_DATE/DATETIME_FORMAT Returns the current value of the
error date or datetime format mask (which is established in the
FORMSnn_Error_Date/Datetime_Format environment variable).
FLAG_USER_VALUE_TOO_LONG Returns the current value of this
property, either ‘TRUE’ or ‘FALSE’, which controls truncation of user-
entered values that exceed an item’s Maximum Length property.
OPERATING_SYSTEM Returns the name of the operating system that is
currently in use. Valid return values are MSWINDOWS,
MSWINDOWS32, WIN32COMMON, UNIX, SunOS, MACINTOSH,
VMS, and HP-UX.
OUTPUT_DATE/DATETIME_FORMAT Returns the current value of the
output date or datetime format mask (which is established in the
FORMSnn_Output_Date/Datetime_Format environment variable).
PASSWORD Returns the password of the current operator.
PLSQL_DATE_FORMAT Returns the current value of the PLSQL date
format mask (which is held in the PLSQL_Date_Format property).
RUNTIME_COMPATIBILITY_MODE Returns the compatibility setting
contained in this property.
SAVEPOINT_NAME Returns the name of the last savepoint Form
Builder has issued. This call is valid only from an On-Savepoint or On-
Rollback trigger. It is included primarily for developers who are using
transactional triggers to access a non-ORACLE data source.
TIMER_NAME Returns the name of the most recently expired timer.
Form Builder returns NULL in response to this constant if there is no timer.
USER_DATE/DATETIME_FORMAT Returns the current value of the
user date or datetime format mask (which is established in the
FORMSnn_User_Date/Datetime_Format environment variable).
USER_INTERFACE Returns the name of the user interface that is
currently in use. Valid return values are MOTIF, MACINTOSH,
MSWINDOWS, MSWINDOWS32, WIN32COMMON, WEB, PM,
CHARMODE, BLOCKMODE, X, and UNKNOWN.
USER_NLS_CHARACTER_SET Returns the current value of the
character set portion only of the USER_NLS_LANG environment variable
defined for the form operator. If USER_NLS_LANG is not explicitly set, it
defaults to the setting of NLS_LANG.
USER_NLS_LANG Returns the complete current value of the
USER_NLS_LANG environment variable defined for the form operator,
for national language support. If USER_NLS_LANG is not explicitly set, it
defaults to the setting of NLS_LANG. USER_NLS_LANG is the

156
equivalent of concatenating USER_NLS_LANGUAGE,
USER_NLS_TERRITORY, and USER_NLS_CHARACTER_SET.
USER_NLS_LANGUAGE Returns the current value of the language
portion only of the USER_NLS_LANG environment variable defined for
the form operator. If USER_NLS_LANG is not explicitly set, it defaults to
the setting of NLS_LANG.
USER_NLS_TERRITORY Returns the current value of the territory
portion only of the USER_NLS_LANG environment variable defined for
the form operator. If USER_NLS_LANG is not explicitly set, it defaults to
the setting of NLS_LANG
USERNAME Returns the name of the current operator. Note: If the user
connects by using an OPS$ account,
GET_APPLICATION_PROPERTY(USERNAME) will not return the
actual username. In this case, you should use
GET_APPLICATION_PROPERTY(CONNECT_STRING) to retrieve
username information.
Usage Notes
To request a complete login, including an appended connect string, use the Username, Password, and
Connect_String properties. For instance, assume that the user has initiated an Microsoft Windows
Runform session specifying the following connect string:
ifrun60 my_form scott/tiger@corpDB1
Form Builder returns the following string as the result of a call to
GET_APPLICATION_PROPERTY(USERNAME):
scott
GET_APPLICATION_PROPERTY(PASSWORD):
tiger
GET_APPLICATION_PROPERTY(CONNECT_STRING):
corpDB1
GET_APPLICATION_PROPERTY restrictions
To retrieve the timer name of the most recently executed timer, you must initiate a call to
GET_APPLICATION_PROPERTY from within a When-Timer-Expired trigger. Otherwise, the results
of the built-in are undefined.
GET_APPLICATION_PROPERTY examples
Example 1
/*
** Built-in: GET_APPLICATION_PROPERTY
** Example: Determine the name of the timer that just
** expired, and based on the username perform a
** task.
** trigger: When-Timer-Expired
*/

157
DECLARE
tm_name VARCHAR2(40);
BEGIN
tm_name := Get_Application_Property(TIMER_NAME);
IF tm_name = ’MY_ONCE_EVERY_FIVE_MINUTES_TIMER’ THEN
:control.onscreen_clock := SYSDATE;
ELSIF tm_name = ’MY_ONCE_PER_HOUR_TIMER’ THEN
Go_Block(’connected_users’);
Execute_Query;
END IF;
END;
Example 2
/*
** Built-in: GET_APPLICATION_PROPERTY
** Example: Capture the username and password of the
** currently logged-on user, for use in calling
** another Tool.
*/
PROCEDURE Get_Connect_Info( the_username IN OUT VARCHAR2,
the_password IN OUT VARCHAR2,
the_connect IN OUT VARCHAR2) IS
BEGIN
the_username := Get_Application_Property(USERNAME);
the_password := Get_Application_Property(PASSWORD);
the_connect := Get_Application_Property(CONNECT_STRING);
END;

158
GET_BLOCK_PROPERTY built-in
Description
Returns information about a specified block. You must issue a call to the built-in once for each property
value you want to retrieve.
Syntax
FUNCTION GET_BLOCK_PROPERTY
(block_id Block,
property NUMBER);
FUNCTION GET_BLOCK_PROPERTY
(block_name VARCHAR2,
property NUMBER);
Returns VARCHAR2
Parameters
block_id The unique ID Form Builder assigned to the block when you created it.
Datatype is BLOCK.
block_name The name you gave the block when you created it. Datatype is
VARCHAR2.
property Specify one of the following constants to return information about the given
block:
ALL_RECORDS Specifies whether all the records matching the query
criteria should be fetched into the data block when a query is executed.
BLOCKSCROLLBAR_X_POS Returns the x position of the block’s
scroll bar as a number specified in the form coordinate units indicated by
the Coordinate System form property.
BLOCKSCROLLBAR_Y_POS Returns the y position of the block’s
scroll bar as a number specified in the form coordinate units indicated by
the Coordinate System form property.
COLUMN_SECURITY Returns the VARCHAR2 value of TRUE if
column security is set to Yes, and the VARCHAR2 string FALSE if it is set
to No.
COORDINATION_STATUS For a block that is a detail block in a
master-detail block relation, this property specifies the coordination status
of the block with respect to its master block(s). Returns the VARCHAR2
value COORDINATED if the block is coordinated with all of its master
blocks. If it is not coordinated with all of its master blocks, the built-in
returns the VARCHAR2 value NON_COORDINATED. Immediately after
records are fetched to the detail block, the status of the detail block is
COORDINATED. When a different record becomes the current record in

159
the master block, the status of the detail block again becomes
NON_COORDINATED.
CURRENT_RECORD Returns the number of the current record.
CURRENT_RECORD_ATTRIBUTE Returns the VARCHAR2 name of
the named visual attribute of the given block.
CURRENT_ROW_BACKGROUND_COLOR The color of the object’s
background region.
CURRENT_ROW_FILL_PATTERN The pattern to be used for the
object’s fill region. Patterns are rendered in the two colors specified by
Background Color and Foreground Color.
CURRENT_ROW_FONT_NAME The font family, or typeface, that
should be used for text in the object. The list of fonts available is system-
dependent.
CURRENT_ROW_FONT_SIZE The size of the font, specified in points.
CURRENT_ROW_FONT_SPACING The width of the font, that is, the
amount of space between characters (kerning).
CURRENT_ROW_FONT_STYLE The style of the font.
CURRENT_ROW_FONT_WEIGHT The weight of the font.
CURRENT_ROW_FOREGROUND_COLOR The color of the object’s
foreground region. For items, the Foreground Color attribute defines the
color of text displayed in the item.
CURRENT_ROW_WHITE_ON_BLACK Specifies that the object is to
appear on a monochrome bitmap display device as white text on a black
background.
DEFAULT_WHERE Returns the default WHERE clause in effect for the
block, as indicated by the current setting of the WHERE block property.
DELETE_ALLOWED Returns the VARCHAR2 value TRUE if the
Delete Allowed block property is Yes, FALSE if it is No. This property
determines whether the operator or the application is allowed to delete
records in the block.
DML_DATA_TARGET_NAME Returns the VARCHAR2 name of the
block’s DML data source.
DML_DATA_TARGET_TYPE Returns the VARCHAR2 value that
indicates the current setting of the DML Data Target Type property. Return
values for this property are NONE, TABLE, STORED PROCEDURE, or
TRANSACTIONAL TRIGGER.
ENFORCE_PRIMARY_KEY Returns the VARCHAR2 value TRUE if
the Enforce Primary Key property is set to Yes for the block. Otherwise, if
the Enforce Primary Key property is set to No, this parameter returns the
VARCHAR2 value FALSE.
ENTERABLE Returns the VARCHAR2 value TRUE if the block is
enterable, that is, if any item in the block has its Enabled and Keyboard

160
Navigable properties set to Yes. Returns the VARCHAR2 string FALSE if
the block is not enterable.
FIRST_DETAIL_RELATION Returns the VARCHAR2 name of the first
relation in which the given block is a detail. Returns NULL if one does not
exist.
FIRST_ITEM Returns the VARCHAR2 name of the first item in the given
block.
FIRST_MASTER_RELATION Returns the VARCHAR2 name of the
first relation in which the given block is a master. Returns NULL if one
does not exist.
INSERT_ALLOWED Returns the VARCHAR2 value TRUE if the Insert
Allowed block property is Yes, FALSE if it is No. This property
determines whether the operator or the application is allowed to insert
KEY_MODE Returns the VARCHAR2 value that indicates the current
setting of the Key Mode block property. Return values for this property are
UNIQUE_KEY, UPDATEABLE_PRIMARY_KEY, or
NON_UPDATEABLE_PRIMARY_KEY.
LAST_ITEM Returns the name of the last item in the given block.
LAST_QUERY Returns the SQL statement of the last query in the
specified block.
LOCKING_MODE Returns the VARCHAR2 value IMMEDIATE if
rows are to be locked immediately on a change to a base table item;
otherwise, it returns the VARCHAR2 value DELAYED if row locks are to
be attempted just prior to a commit.
MAX_QUERY_TIME Returns the VARCHAR2 value that indicates the
current setting of the Maximum Query Time property. This property
determines whether the operator can abort a query when the elapsed time of
the query exceeds the value of this property.
MAX_RECORDS_FETCHED Returns a number representing the
maximum number of records that can be fetched. This property is only
useful when the Query All Records property is set to Yes.
NAVIGATION_STYLE Returns the VARCHAR2 value that indicates the
current setting of the block’s NAVIGATION_STYLE property, either
SAME_RECORD, CHANGE_RECORD, or CHANGE_BLOCK.
NEXTBLOCK Returns the name of the next block. Returns NULL if the
indicated block is the last block in the form. Note that the setting of the
block’s NEXT_NAVIGATION_BLOCK property has no effect on the value
of NEXTBLOCK.
NEXT_NAVIGATION_BLOCK Returns the VARCHAR2 name of the
block’s next navigation block. By default, the next navigation block is the
next block as defined by the order of blocks in the Object Navigator;
however, the NEXT_NAVIGATION_BLOCK block property can be set to
override the default block navigation sequence.

161
OPTIMIZER_HINT Returns a hint in the form of a VARCHAR2 string
that Form Builder passes on to the RDBMS optimizer when constructing
queries.
ORDER_BY Returns the default ORDER BY clause in effect for the
block, as indicated by the current setting of the ORDER BY block property.
PRECOMPUTE_SUMMARIES[Under Construction]
PREVIOUSBLOCK Returns the name of the block that has the next lower
sequence in the form, as defined by the order of blocks in the Object
Navigator. Returns NULL if the indicated block is the first block in the
form. Note that the setting of the block’s
PREVIOUS_NAVIGATION_BLOCK property has no effect on the value
of PREVIOUSBLOCK.
PREVIOUS_NAVIGATION_BLOCK Returns the VARCHAR2 name of
the block’s previous navigation block. By default, the previous navigation
block is the block with the next lower sequence, as defined by the order of
blocks in the Object Navigator; however, the
NEXT_NAVIGATION_BLOCK block property can be set to override the
default block navigation sequence.
QUERY_ALLOWED Returns the VARCHAR2 value TRUE if the Query
Allowed block property is Yes, FALSE if it is No. This property
determines whether the operator or the application is allowed to query
QUERY_DATA_SOURCE_NAME Returns the VARCHAR2 name of
the block’s query data source.
QUERY_DATA_SOURCE_TYPE Returns the VARCHAR2 value that
indicates the current setting of the Query Data Source Type property.
Return values for this property are NONE, TABLE, STORED
PROCEDURE, TRANSACTIONAL TRIGGER, or SUB-QUERY.
QUERY_HITS Returns the VARCHAR2 value that indicates the number
of records identified by the COUNT_QUERY operation. If this value is
examined while records are being retrieved from a query, QUERY_HITS
specifies the number of records that have been retrieved.
QUERY_OPTIONS Returns the VARCHAR2 values VIEW,
FOR_UPDATE, COUNT_QUERY, or a null value if there are no options.
You can call GET_BLOCK_PROPERTY with this parameter from within a
transactional trigger when your user exit needs to know what type of query
operation Form Builder would be doing by default if you had not
circumvented default processing.
RECORDS_DISPLAYED Returns the number of records that the given
block can display. Corresponds to the Number of Records Displayed block
property.
RECORDS_TO_FETCH Returns the number of records Form Builder
expects an On-Fetch trigger to fetch and create as queried records.
STATUS Returns the VARCHAR2 value NEW if the block contains only
new records, CHANGED if the block contains at least one changed record,

162
and QUERY if the block contains only valid records that have been
retrieved from the database.
TOP_RECORD Returns the record number of the topmost visible record
in the given block.
UPDATE_ALLOWED Returns the VARCHAR2 value TRUE if the
Update Allowed block property is Yes, FALSE if it is No. This property
determines whether the operator or the application is allowed to update
UPDATE_CHANGED_COLUMNS Specifies that only those columns
updated by an operator will be sent to the database. When Update Changed
Columns Only is set to No, all columns are sent, regardless of whether they
have been updated. This can result in considerable network traffic,
particularly if the block contains a LONG data type.
GET_BLOCK_PROPERTY examples
/*
** Built-in: GET_BLOCK_PROPERTY
** Example: Return the screen line of the current record in
** a multi-record block. Could be used to
** dynamically position LOV to a place on the
** screen above or below the current line so as to
** not obscure the current record in question.
*/
FUNCTION Current_Screen_Line
RETURN NUMBER IS
cur_blk VARCHAR2(40) := :System.Cursor_Block;
cur_rec NUMBER;
top_rec NUMBER;
itm_lin NUMBER;
cur_lin NUMBER;
bk_id Block;
BEGIN
/*
** Get the block id since we’ll be doing multiple
** Get_Block_Property operations for the same block
*/
bk_id := Find_Block( cur_blk );
/*
** Determine the (1) Current Record the cursor is in,
** (2) Current Record which is visible at the
** first (top) line of the multirecord
** block.
*/
cur_rec := Get_Block_Property( bk_id, CURRENT_RECORD);
top_rec := Get_Block_Property( bk_id, TOP_RECORD);
/*
** Determine the position on the screen the first field in
** the multirecord block
*/
itm_lin := Get_Item_Property( Get_Block_Property
(bk_id,FIRST_ITEM),Y_POS);
/*
** Add the difference between the current record and the
** top record visible in the block to the screen position
** of the first item in the block to get the screen
** position of the current record:
*/

163
cur_lin := itm_lin + (cur_rec - top_rec);
RETURN cur_lin;
END;

164
GET_CANVAS_PROPERTY built-in
Description
Returns the given canvas property for the given canvas. .
Syntax
FUNCTION GET_CANVAS_PROPERTY
(canvas_id Canvas,
property NUMBER);
FUNCTION GET_CANVAS_PROPERTY
(canvas_name VARCHAR2,
property NUMBER);
Returns VARCHAR2
Parameters
canvas_id The unique ID that Form Builder assigns the canvas object when it creates
it. Use the FIND_CANVAS built-in to return the ID to a variable with
datatype of CANVAS.
canvas_name The name you gave the canvas object when you defined it.
property The property for which you want to get a value for the given canvas. You
can enter the following constants for return values:
BACKGROUND_COLOR The color of the object’s background region.
FILL_PATTERN The pattern to be used for the object’s fill region.
Patterns are rendered in the two colors specified by Background Color and
Foreground Color.
FONT_NAME The font family, or typeface, that should be used for text in
the object. The list of fonts available is system-dependent.
FONT_SIZE The size of the font, specified in points.
FONT_SPACING The width of the font, that is, the amount of space
between characters (kerning).
FONT_STYLE The style of the font.
FONT_WEIGHT The weight of the font.
FOREGROUND_COLOR The color of the object’s foreground region.
For items, the Foreground Color attribute defines the color of text displayed
in the item.
HEIGHT Returns the height of the canvas, specified in the form
coordinate units indicated by the Coordinate System form property.

165
TAB_PAGE_X_OFFSET Returns the distance between the left edge of
the tab canvas and the left edge of the tab page. The value returned
depends on the form coordinate system—pixel, centimeter, inch, or point.
TAB_PAGE_Y_OFFSET Returns the distance between the top edge of
the tab canvas and the top edge of the tab page. The value returned
depends on the form coordinate system—pixel, centimeter, inch, or point.
TOPMOST_TAB_PAGE Returns the name of the tab page currently top-
most on the named tab canvas.
WHITE_ON_BLACK Specifies that the object is to appear on a
monochrome bitmap display device as white text on a black background.
WIDTH Returns the width of the canvas, specified in the form coordinate
units indicated by the Coordinate System form property.
VISUAL_ATTRIBUTE Returns the name of the visual attribute currently
in force. If no named visual attribute is assigned to the canvas, returns
CUSTOM for a custom visual attribute or DEFAULT for a default visual
attribute.
GET_CANVAS_PROPERTY examples
/*
** Built-in: GET_CANVAS_PROPERTY
** Example: Can get the width/height of the canvas.
*/
DECLARE
the_width NUMBER;
the_height NUMBER;
cn_id CANVAS;
BEGIN
cn_id := FIND_CANVAS(’my_canvas_1’);
the_width := GET_CANVAS_PROPERTY(cn_id, WIDTH);
the_height := GET_CANVAS_PROPERTY(cn_id,HEIGHT);
END;

166
GET_CUSTOM_PROPERTY built-in
Description
Gets the value of a user-defined property in a Java pluggable component.
Syntax
The built-in returns a VARCHAR2 value containing the string, numeric, or boolean data.
GET_CUSTOM_PROPERTY
(item,
row-number,
prop-name);
Returns VARCHAR2
Parameters
item The name or ID of the item associated with the target Java pluggable
component. The name can be in the form of either a varchar2 literal or a
variable set to the value of the name.
row-number The row number of the instance of the item that you want to get. (Instance
row numbers begin with 1.)
prop-name The particular property of the Java component that you want to get.
Usage Notes
• In the Java pluggable component, each custom property type must be represented by a single
instance of the ID class, created by using ID.registerProperty.
• For each Get_Custom_Property built-in executed in the form, the Java component’s getProperty
method is called.
• The name of the item can be gained through either Find_Item(‘Item_Name’), or simply via
‘Item_Name’.

167
GET_FILE_NAME built-in
Description
Displays the standard open file dialog box where the user can select an existing file or specify a new file.
Syntax
FUNCTION GET_FILE_NAME
(directory_name VARCHAR2,
file_name VARCHAR2,
file_filter VARCHAR2,
message VARCHAR2,
dialog_type NUMBER,
select_file BOOLEAN;
Returns VARCHAR2
Parameters
directory_name Specifies the name of the directory containing the file you want to open.
The default value is NULL. If directory_name is NULL, subsequent
invocations of the dialog may open the last directory visited.
file_name Specifies the name of the file you want to open. The default value is
NULL.
file_filter Specifies that only particular files be shown. The default value is NULL.
File filters take on different forms, and currently are ignored on the motif
and character mode platforms. On Windows, they take the form of Write
Files (*.WRI)|*.WRI| defaulting to All Files (*.*)|*.*| if NULL. On the
Macintosh the attribute currently accepts a string such as Text.
message Specifies the type of file that is being selected. The default value is NULL.
dialog_type Specifies the intended dialog to OPEN_FILE or SAVE_FILE. The default
value is OPEN_FILE.
select_file Specifies whether the user is selecting files or directories. The default
value is TRUE. If dialog_type is set to SAVE_FILE, select_file is
internally set to TRUE.
GET_FILE_NAME examples
/*
** Built-in: GET_FILE_NAME
** Example: Can get an image of type TIFF.
*/

168
DECLARE
filename VARCHAR2(256)
BEGIN
filename := GET_FILE_NAME(File_Filter=> ’TIFF Files
(*.tif)|*.tif|’);
READ_IMAGE_FILE(filename, ’TIFF’, ’block5.imagefld);
END;

169
GET_FORM_PROPERTY built-in
Description
Returns information about the given form. If your application is a multi-form application, then you can
call this built-in to return information about the calling form, as well as about the current, or called form.
Syntax
FUNCTION GET_FORM_PROPERTY
(formmodule_id FormModule,
property NUMBER);
FUNCTION GET_FORM_PROPERTY
property NUMBER);
Returns VARCHAR2
Parameters
formmodule_id Specifies the unique ID Form Builder assigns when it creates the form
module. Use the FIND_FORM built-in to return the ID to an appropriately
typed variable. The data type of the ID is FormModule.
formmodule_name Specifies the VARCHAR2 name that you gave to the form module when
you defined it.
property Returns information about specific elements of the form based on which of
the following constants are supplied to the built-in:
CHARACTER_CELL_HEIGHT Returns the dimensions of the character
cell in the form units specified by the Coordinate System property. When
Coordinate System is Character Cells, the value is returned in pixels.
CHARACTER_CELL_WIDTH Returns the dimensions of the character
cell in the form units specified by the Coordinate System property. When
Coordinate System is Character Cells, the value is returned in pixels.
COORDINATE_SYSTEM Returns a VARCHAR2 string indicating the
coordinate system used in the form module.
CHARACTER_CELL if the current coordinate system for the form is
character cell based.
POINTS if the current coordinate system for the form is points.
CENTIMETERS if the current coordinate system for the form is
centimeters.
INCHES if the current coordinate system for the form is inches.
PIXELS if the current coordinate system for the form is pixels.
the named visual attribute that should be used for the current row.

170
background region.
dependent.
background.
CURSOR_MODE Returns the setting that indicates the intended effect of
a commit action on existing cursors.
DEFER_REQUIRED_ENFORCEMENT Returns the setting that
indicates whether enforcement of required fields has been deferred from
item validation to record validation. Valid return values are TRUE, 4.5,
and FALSE.
DIRECTION Returns the layout direction for bidirectional objects. Valid
return values are RIGHT_TO_LEFT, LEFT_TO_RIGHT.
FILE_NAME Returns the name of the file where the named form is
stored.
FIRST_BLOCK Returns the name of the block with the lowest sequence
number in the indicated form.
FIRST_NAVIGATION_BLOCK Returns the name of the block into
which Form Builder attempts to navigate at form startup. By default, the
first navigation block is the first block defined in the Object Navigator;
however, the FIRST_NAVIGATION_BLOCK block property can be set to
specify a different block as the first block at form startup.
FORM_NAME Returns the name of the form.
INTERACTION_MODE Returns the interaction mode for the form. Valid
return values are BLOCKING or NONBLOCKING.
ISOLATION_MODE Returns the form’s isolation mode setting, either
READ_COMMITTED or SERIALIZABLE.

171
LAST_BLOCK Returns the name of the block with the highest sequence
number in the indicated form.
MAX_QUERY_TIME Returns the VARCHAR2 value that indicates the
current setting of the Maximum Query Time property. This property
determines whether the operator can abort a query when the elapsed time of
the query exceeds the value of this property.
MAX_RECORDS_FETCHED Returns a number representing the
maximum number of records that can be fetched. This property is only
useful when the Query All Records property is set to Yes.
MODULE_NLS_CHARACTER_SET Returns the current value of the
character set portion only of the DEVELOPER_NLS_LANG environment
variable defined for the form. If DEVELOPER_NLS_LANG is not
explicitly set, it defaults to the setting of NLS_LANG.
MODULE_NLS_LANG Returns the complete current value for national
language support contained in the DEVELOPER_NLS_LANG
environment variable defined for the form. If DEVELOPER_NLS_LANG
is not explicitly set, it defaults to the setting of NLS_LANG.
MODULE_NLS_LANG is the equivalent of concatenating
MODULE_NLS_LANGUAGE, MODULE_NLS_TERRITORY, and
MODULE_NLS_CHACTER_SET.
MODULE_NLS_LANGUAGE Returns the current value of the language
portion only of the DEVELOPER_NLS_LANG environment variable
defined for the form. If DEVELOPER_NLS_LANG is not explicitly set, it
MODULE_NLS_TERRITORY Returns the current value of the territory
portion only of the DEVELOPER_NLS_LANG environment variable
defined for the form. If DEVELOPER_NLS_LANG is not explicitly set, it
SAVEPOINT_MODE Returns PROPERTY_ON or PROPERTY_OFF
to indicate whether savepoints are supported in the data source.
VALIDATION Returns TRUE or FALSE to indicate whether default
Form Builder validation is enabled.
VALIDATION_UNIT Returns a VARCHAR2 string indicating the
current validation unit for the form:
FORM_SCOPE if the current validation unit is the form.
BLOCK_SCOPE if the current validation unit is the block.
RECORD_SCOPE if the current validation unit is the record.
ITEM_SCOPE if the current validation unit is the item or if the
current validation unit is set to DEFAULT.
GET_FORM_PROPERTY examples
Example 1
/*
** Built-in: GET_FORM_PROPERTY
** Example: Determine the name of the first block in the form.

172
*/
DECLARE
curform VARCHAR2(40);
blkname VARCHAR2(40);
BEGIN
curform := :System.Current_Form;
blkname := Get_Form_Property(curform,FIRST_BLOCK);
END;
Example 2
/*
** Built-in: GET_FORM_PROPERTY
** Example: Evaluate the current setting of the
** Validate property.
*/
BEGIN
IF Get_Form_Property(’curform’, VALIDATION) = ’FALSE’
THEN
Message (’Form currently has Validation turned OFF’);
END IF;
END;

173
GET_GROUP_CHAR_CELL built-in
Description
Returns the VARCHAR2 or LONG value for a record group cell identified by the given row and column.
A cell is an intersection of a row and column.
Syntax
FUNCTION GET_GROUP_CHAR_CELL
(groupcolumn_id GroupColumn,
row_number NUMBER);
FUNCTION GET_GROUP_CHAR_CELL
(groupcolumn_name VARCHAR2,
row_number NUMBER);
Returns VARCHAR2
Parameters
groupcolumn_id Specifies the unique ID that Form Builder assigns when it creates the record
group column. Use the FIND_COLUMN built-in to return the ID to an
appropriately typed variable. The data type of the ID is GroupColumn.
groupcolumn_name Specifies the fully qualified VARCHAR2 record group column name you
gave the column when you defined it, preceded by the record group name
and a dot, as in recordgroup_name.groupcolumn_name. If the column was
defined as a result of a query, its name is the same as its corresponding
database column.
row_number Specifies the row from which to retrieve the value of the cell.
GET_GROUP_CHAR_CELL restrictions
The row_number specified must be within the bounds implied by the number of rows in the record
group. A non-existent row_number results in an index out of bounds error.
GET_GROUP_CHAR_CELL examples
/*
** Built-in: GET_GROUP_CHAR_CELL
** Example: Search thru names in a static record group to
** determine if the value passed into this subprogram
** exists in the list. Returns the row number
** where the record was first located, or zero (0)
** if no match was found.
*/
FUNCTION Is_Value_In_List( the_value VARCHAR2,
the_rg_name VARCHAR2,
the_rg_column VARCHAR2)

174
RETURN NUMBER IS
the_Rowcount NUMBER;
rg_id RecordGroup;
gc_id GroupColumn;
col_val VARCHAR2(80);
Exit_Function Exception;
BEGIN
/*
** Determine if record group exists, and if so get its ID.
*/
rg_id := Find_Group( the_rg_name );
Message(’Record Group ’||the_rg_name||’ does not exist.’);
RAISE Exit_Function;
END IF;
/*
** Make sure the column name specified exists in the
** record Group.
*/
gc_id := Find_Column( the_rg_name||’.’||the_rg_column );
IF Id_Null(gc_id) THEN
Message(’Column ’||the_rg_column||’ does not exist.’);
END IF;
/*
** Get a count of the number of records in the record
** group
*/
the_Rowcount := Get_Group_Row_Count( rg_id );
/*
** Loop through the records, getting the specified column’s
** value at each iteration and comparing it to ’the_value’
** passed in. Compare the values in a case insensitive
** manner.
*/
FOR j IN 1..the_Rowcount LOOP
col_val := GET_GROUP_CHAR_CELL( gc_id, j );
/*
** If we find a match, stop and return the
** current row number.
*/
IF UPPER(col_val) = UPPER(the_value) THEN
RETURN j;
END IF;
END LOOP;
/*
** If we get here, we didn’t find any matches.
*/
EXCEPTION
WHEN Exit_Function THEN
RETURN 0;
END;

175
GET_GROUP_DATE_CELL built-in
Description
Returns the DATE value for a record group cell identified by the given row and column. A cell is an
intersection of a row and column.
Syntax
FUNCTION GET_GROUP_DATE_CELL
row_number NUMBER);
FUNCTION GET_GROUP_DATE_CELL
row_number NUMBER);
Returns DATE
Parameters
group column. Use the FIND_COLUMN built-in to return the ID to an appropriately typed variable.
The data type of the ID is GroupColumn.
database column.
GET_GROUP_DATE_CELL restrictions
GET_GROUP_DATE_CELL examples
/*
** Built-in: GET_GROUP_DATE_CELL
** Example: Lookup a row in a record group, and return the
** minimum order date associated with that row in
** the record group. Uses the ’is_value_in_list’
** function from the GET_GROUP_CHAR_CELL example.
*/
FUNCTION Max_Order_Date_Of( part_no VARCHAR2 )
RETURN DATE IS
fnd_row NUMBER;
BEGIN

176
/*
** Try to lookup the part number among the temporary part
** list record group named ’TMPPART’ in its ’PARTNO’
** column.
*/
fnd_row := Is_Value_In_List( part_no, ’TMPPART’, ’PARTNO’);
IF fnd_row = 0 THEN
Message(’Part Number ’||part_no||’ not found.’);
RETURN NULL;
ELSE
/*
** Get the corresponding Date cell value from the
** matching row.
*/
RETURN Get_Group_Date_Cell( ’TMPPART.MAXORDDATE’, fnd_row );
END IF;
END;

177
GET_GROUP_NUMBER_CELL built-in
Description
Returns the NUMBER value for a record group cell identified by the given row and column. A cell is an
intersection of a row and column.
Syntax
FUNCTION GET_GROUP_NUMBER_CELL
row_number NUMBER);
FUNCTION GET_GROUP_NUMBER_CELL
row_number NUMBER);
Returns NUMBER
Parameters
group column. Use the FIND_COLUMN built-in to return the ID to an
database column.
GET_GROUP_NUMBER_CELL restrictions
GET_GROUP_NUMBER_CELL examples
/*
** Built-in: GET_GROUP_NUMBER_CELL
** Example: Lookup a row in a record group, and return the
** minimum order quantity associated with that row
** in the record group. Uses the
** ’is_value_in_list’ function from the
** GET_GROUP_CHAR_CELL example.
*/
FUNCTION Min_Order_Qty_Of( part_no VARCHAR2 )
RETURN NUMBER IS
fnd_row NUMBER;

178
BEGIN
/*
** Try to lookup the part number among the temporary part
** list record group named ’TMPPART’ in its ’PARTNO’
** column.
*/
IF fnd_row = 0 THEN
RETURN NULL;
ELSE
/*
** Get the corresponding Number cell value from the
** matching row.
*/
RETURN Get_Group_Number_Cell( ’TMPPART.MINQTY’, fnd_row );
END IF;
END;

179
GET_GROUP_RECORD_NUMBER built-in
Description
Returns the record number of the first record in the record group with a column value equal to the
cell_value parameter. If there is no match, 0 (zero) is returned.
Syntax
FUNCTION GET_GROUP_RECORD_NUMBER
cell_value NUMBER);
FUNCTION GET_GROUP_RECORD_NUMBER
cell_value NUMBER);
Returns NUMBER
Parameters
groupcolumn_id Specifies the unique ID that Form Builder assigns to the record group
column when it creates it. Use the FIND_COLUMN built-in to return the
ID to a variable. The data type of the ID is GroupColumn.
groupcolumn_name Specifies the name of the record group column that you gave to the group
when creating it. The data type of the name is VARCHAR2.
cell_value Specifies the value to find in the specified record group column. The data
type of the name is VARCHAR2, NUMBER, or DATE.
GET_GROUP_RECORD_NUMBER restrictions
The dataype of the cell_value parameter must match the datatype of the record group column. The
comparison is case-sensitive for VARCHAR2 comparisons.
GET_GROUP_RECORD_NUMBER examples
/*
** Built-in: GET_GROUP_RECORD_NUMBER
** Example: Find the first record in the record group with a
** cell in a column that is identical to the value
** specified in the cell_value parameter.
*/
DECLARE
rg_id RecordGroup;
match NUMBER := 2212;
status NUMBER;
the_recordnum NUMBER;
BEGIN
rg_id := Create_Group_From_Query(’QGROUP’,
’SELECT ENAME,EMPNO,SAL FROM EMP ORDER BY SAL DESC’);

180
status := Populate_Group( rg_id );
*/ *** Zero status is success*** /
IF status = 0 THEN
the_recordnum
:=Get_Group_Record_Number(’QGROUP.ENAME’,match);
Message(’The first match is record number
’||to_CHAR(the_recordnum));
ELSE
Message(’Error creating query record group.’);
END IF;
END;

181
GET_GROUP_ROW_COUNT built-in
Description
Returns the number of rows in the record group.
Syntax
FUNCTION GET_GROUP_ROW_COUNT
FUNCTION GET_GROUP_ROW_COUNT
Returns NUMBER
Parameters
recordgroup_id Specifies the unique ID that Form Builder assigns to the record group when
it creates it. Use the FIND_GROUP built-in to return the ID to a variable.
The data type of the ID is RecordGroup.
recordgroup_name Specifies the name of the record group that you gave to the group when
creating it. The data type of the name is VARCHAR2.
GET_GROUP_ROW_COUNT examples
/*
** Built-in: GET_GROUP_ROW_COUNT
** Example: Determine how many rows were retrieved by a
** Populate_Group for a query record group.
*/
DECLARE
rg_id RecordGroup;
status NUMBER;
the_rowcount NUMBER;
BEGIN
rg_id := Create_Group_From_Query(’MY_QRY_GROUP’,
’SELECT ENAME,EMPNO,SAL FROM EMP ORDER BY SAL DESC’);
status := Populate_Group( rg_id );
*/ *** Zero status is success*** /
IF status = 0 THEN
the_rowcount := Get_Group_Row_Count( rg_id );
Message(’The query retrieved ’||to_CHAR(the_rowcount)||
’ record(s)’);
ELSE
Message(’Error creating query record group.’);
END IF;
END;

182
GET_GROUP_SELECTION built-in
Description
Retrieves the sequence number of the selected row for the given group.
Syntax
FUNCTION GET_GROUP_SELECTION
selection_number NUMBER);
FUNCTION GET_GROUP_SELECTION
selection_number NUMBER);
Returns NUMBER
Parameters
creating it.
selection_number Identifies the selected rows in order of their selection. For example, given
that rows 3, 7, and 21 are selected, their respective selection values are 1,
2, and 3. The selection_number argument takes a value of the NUMBER
data type.
GET_GROUP_SELECTION examples
/*
** Built-in: GET_GROUP_SELECTION
** Example: Return a comma-separated list (string) of the
** selected part numbers from the presumed
** existent PARTNUMS record group.
*/
FUNCTION Comma_Separated_Partnumbers
RETURN VARCHAR2 IS
tmp_str VARCHAR2(2000);
rg_id RecordGroup;
gc_id GroupColumn;
sel_row NUMBER;
the_val VARCHAR2(20);
BEGIN
rg_id := Find_Group(’PARTNUMS’);
gc_id := Find_Column(’PARTNUMS.PARTNO’);
/*
** Get a count of how many rows in the record group have

183
** been marked as "selected"
*/
the_Rowcount := Get_Group_Selection_Count( rg_id );
/*
** Get the Row number of the J-th selected row.
*/
sel_row := Get_Group_Selection( rg_id, j );
/*
** Get the (VARCHAR2) value of the J-th row.
*/
the_val := Get_Group_CHAR_Cell( gc_id, sel_row );
IF j = 1 THEN
tmp_str := the_val;
ELSE
tmp_str := tmp_str||’,’||the_val;
END IF;
END LOOP;
RETURN tmp_str;
END;

184
GET_GROUP_SELECTION_COUNT built-in
Description
Returns the number of rows in the indicated record group that have been programmatically marked as
selected by a call to SET_GROUP_SELECTION.
Syntax
FUNCTION GET_GROUP_SELECTION_COUNT
FUNCTION GET_GROUP_SELECTION_COUNT
Returns NUMBER
Parameters
creating it.
GET_GROUP_SELECTION_COUNT examples
/*
** Built-in: GET_GROUP_SELECTION_COUNT
** Example: See GET_GROUP_SELECTION
*/

185
GET_INTERFACE_POINTER built-in
Description
Returns a handle to an OLE2 automation object.
Syntax
FUNCTION GET_INTERFACE_POINTER
(item_id Item);
FUNCTION GET_INTERFACE_POINTER
Returns PLS_INTEGER
Enter Query Mode no
Parameters
GET_INTERFACE_POINTER restrictions
GET_INTERFACE_POINTER examples
/*
** Built-in: GET_INTERFACE_POINTER
** Example: Finds a handle to an OLE object
*/
FUNCTION HandleMap(MapName VARCHAR2) RETURN OLE2.obj_type is
BEGIN
RETURN(Get_interface_Pointer(MapName));
END;

186
GET_ITEM_INSTANCE_PROPERTY built-in
Description
Returns property values for the specified item instance. GET_ITEM_INSTANCE_PROPERTY returns
the initial value or the value last specified by SET_ITEM_INSTANCE_PROPERTY for the specified
item instance. It does not return the effective value of a property (i.e. the value derived from combining
properties specified at the item instance, item, and block levels). See
SET_ITEM_INSTANCE_PROPERTY for information about effective property values.
Syntax
FUNCTION GET_ITEM_INSTANCE_PROPERTY
(item_id ITEM,
record_number NUMBER,
property NUMBER);
FUNCTION GET_ITEM_INSTANCE_PROPERTY
property NUMBER);
Returns VARCHAR2
Parameters
item_id The unique ID that Form Builder assigns to the object when it creates it.
Use the FIND_ITEM built-in to return the ID to a variable of datatype
ITEM.
item_name The name you gave the object when you created it.
record_number A record number or CURRENT_RECORD.
property The property the value of which you want to get for the given item. Valid
properties are:
BORDER_BEVEL Returns RAISED, LOWERED, or PLAIN if the
BORDER_BEVEL property is set to RAISED, LOWERED, or PLAIN,
respectively at the item instance level. If BORDER_BEVEL is not specfied
at the item instance level, this property returns " ".
INSERT_ALLOWED Returns the VARCHAR2 string TRUE if the item
instance INSERT_ALLOWED property is set to true. Returns the string
FALSE if the property is set to false.
NAVIGABLE Returns the VARCHAR2 string TRUE if the item instance
NAVIGABLE property is set to true. Returns the string FALSE if the
property is set to false.
REQUIRED Returns the VARCHAR2 string TRUE if the item instance
REQUIRED property is set to true. Returns the string FALSE if the
property is set to false.

187
SELECTED_RADIO_BUTTON Returns the label of the selected radio
button within the radio group in the specified record. Returns NULL if the
radio group for the specified record does not have a selected radio button or
if the specified record has been scrolled out of view.
UPDATE_ALLOWED Returns the VARCHAR2 string TRUE if the item
instance UPDATE_ALLOWED property is set to true. Returns the string
in force. If no named visual attribute is assigned to the item instance,
returns DEFAULT for a default visual attribute. Returns ’’ if
VISUAL_ATTRIBUTE is not specified at the item instance level.

188
GET_ITEM_PROPERTY built-in
Description
Returns property values for the specified item. Note that in some cases you may be able to get—but not
set—certain object properties.
Syntax
FUNCTION GET_ITEM_PROPERTY
(item_id, ITEM
property NUMBER);
FUNCTION GET_ITEM_PROPERTY
property NUMBER);
Returns VARCHAR2
Parameters
item_id The unique ID that Form Builder assigns to the object when it creates it.
Use the FIND_ITEM built-in to return the ID to a variable of datatype
ITEM.
item_name The name you gave the object when you created it.
property The property the value of which you want to get for the given item. Valid
properties are:
AUTO_HINT Returns the VARCHAR2 string TRUE if the Automatic
Hint property is set to Yes, and the VARCHAR2 string FALSE if it is set to
No.
AUTO_SKIP Returns the VARCHAR2 string TRUE if Automatic Skip is
set to Yes for the item, and the string FALSE if it is set to No for the item.
BACKGROUND_COLOR The color of the object's background region.
BLOCK_NAME Returns the VARCHAR2 block name for the item.
BORDER_BEVEL Returns RAISED, LOWERED, or PLAIN if the
BORDER_BEVEL property is set to RAISED, LOWERED, or PLAIN,
respectively at the item level.
CASE_INSENSITIVE_QUERY Returns the VARCHAR2 string TRUE
if this property is set to Yes for the item, and the string FALSE if the
property is set to No.
CASE_RESTRICTION Returns UPPERCASE if text for the item is to
display in upper case, LOWERCASE if the text is to display in lower case,
or NONE if no case restriction is in force.

189
COLUMN_NAME Returns the name of the column in the database to
which the datablock item is associated.
COMPRESS Returns a value (either TRUE or FALSE) that indicates
whether the sound object being read into a form from a file should be
compressed when converting to the Oracle internal format.
CONCEAL_DATA Returns the VARCHAR2 string TRUE if the text an
operator types into the text item is to be hidden, and the VARCHAR2 string
FALSE if the text an operator types into the text item is to be displayed.
the named visual attribute of the given item.
background region.
dependent.
background.
DATABASE_VALUE For a base table item, returns the value that was
originally fetched from the database.
DATATYPE Returns the data type of the item: ALPHA, CHAR, DATE,
JDATE, EDATE, DATETIME, INT, RINT, MONEY, RMONEY,
NUMBER, RNUMBER, TIME, LONG, GRAPHICS, or IMAGE. Note
that some item types, such as buttons and charts, do not have data types. To
avoid an error message in these situations, screen for item type before
getting data type.
DISPLAYED Returns the VARCHAR2 string TRUE or FALSE.

190
ECHO Returns the VARCHAR2 string TRUE if the Conceal Data
property is set to No for the item, and the VARCHAR2 string FALSE if the
Conceal Data property is set to Yes for the item.
EDITOR_NAME Returns the name of the editor attached to the text item.
EDITOR_X_POS Returns the x coordinate of the editor attached to the
text item. (Corresponds to the Editor Position property.)
EDITOR_Y_POS Returns the y coordinate of the editor attached to the
edit item. (Corresponds to the Editor Position property.)
ENFORCE_KEY Returns the name of the item whose value is copied to
this item as a foreign key when a new record is created as part of a master-
detail relation. (Corresponds to the Copy property.)
ENABLED Returns TRUE if enabled property is set to Yes, FALSE if set
to No.
Foreground Color.
FIXED_LENGTH Returns the VARCHAR2 string TRUE if the property
is set to Yes for the item, and the VARCHAR2 string FALSE if the
property is set to No for the item.
FONT_SIZE The size of the font, specified in hundredths of a point (i.e.,
an item with a font size of 8 points will return 800).
in the item.
FORMAT_MASK Returns the format mask used for the text item.
HEIGHT Returns the height of the item. The size of the units depends on
the Coordinate System and default font scaling you specified for the form.
HINT_TEXT Returns the item-specific help text displayed on the message
line at runtime.
ICON_NAME Returns the file name of the icon resource associated with a
button item having the iconic property set to TRUE.
ICONIC_BUTTON Returns the VARCHAR2 value TRUE if the button is
defined as iconic, and the VARCHAR2 value FALSE if it is not an iconic
button.
IMAGE_DEPTH Returns the color depth of the specified image item.

191
IMAGE_FORMAT Returns the format of the specified image item.
INSERT_ALLOWED Returns the VARCHAR2 string TRUE if the
INSERT_ALLOWED property is set to true at the item level. Returns the
string FALSE if the property is set to false.
ITEM_CANVAS Returns the name of the canvas to which the item is
assigned.
ITEM_IS_VALID Returns the VARCHAR2 string TRUE if the current
item is valid, and the VARCHAR2 string FALSE if the current item is not
valid.
ITEM_NAME Returns the name of the item.
ITEM_TAB_PAGE Returns the name of the tab page to which the item is
assigned. Note that the item must be assigned to a tab canvas in order for
Form Builder to return the name of the item’s tab page.
ITEM_TYPE Returns the type of the item. Returns BUTTON if the item
is a button, CHART ITEM if the item is a chart item, CHECKBOX if the
item is a check box, DISPLAY ITEM if the item is a display item, IMAGE
if the item is an image item, LIST if the item is a list item, OLE OBJECT if
the item is an OCX control or an OLE container, RADIO GROUP if the
item is a radio group, TEXT ITEM if the item is a text item, USER AREA
if the item is a user area, and VBX CONTROL if the item is a custom item
that is a VBX control.
JUSTIFICATION Returns the text alignment for text items and display
items only. Valid return values are START, END, LEFT, CENTER,
RIGHT.
KEEP_POSITION Returns the VARCHAR2 string TRUE if the cursor is
to re-enter at the identical location it was in when it left the item, and the
VARCHAR2 string FALSE if the cursor is to re-enter the item at its default
position.
LABEL Returns the VARCHAR2 value defined for the item’s Label
property. This property is valid only for items that have labels, such as
buttons and check boxes.
LIST Returns the VARCHAR2 string TRUE if the item is a text item to
which a list of values (LOV) is attached; otherwise returns the VARCHAR2
string FALSE.
LOCK_RECORD_ON_CHANGE Returns the VARCHAR2 string
TRUE if Form Builder should attempt to lock a row based on a potential
change to this item, and returns the VARCHAR2 string FALSE if no lock
should be attempted.
LOV_NAME Returns the VARCHAR2 name of the LOV associated with
the given item. If the LOV name does not exist, you will get an error
message.
LOV_X_POS Returns the x coordinate of the LOV associated with the text
item. (Corresponds to the List X Position property.)

192
LOV_Y_POS Returns the y coordinate of the LOV associated with the
text item. (Corresponds to the List Y Position property.)
MAX_LENGTH Returns the maximum length setting for the item. The
value is returned as a whole NUMBER.
MERGE_CURRENT_ROW_VA Merges the contents of the specified
visual attribute with the current row’s visual attribute (rather than replacing
it).
MERGE_TOOLTIP_ATTRIBUTE Merges the contents of the specified
visual attribute with the tooltip’s current visual attribute (rather than
replacing it).
MERGE_VISUAL_ATTRIBUTE Merges the contents of the specified
visual attribute with the object’s current visual attribute (rather than
replacing it).
MOUSE_NAVIGATE Returns the VARCHAR2 string TRUE if Mouse
Navigate is set to Yes for the item, and the VARCHAR2 string FALSE if it
is set to No for the item.
MULTI_LINE Returns the VARCHAR2 value TRUE if the item is a
multi-line text item, and the VARCHAR2 string FALSE if it is a single-line
text item.
NAVIGABLE Returns the VARCHAR2 string TRUE if the
NAVIGABLE property is set to true at the item level. Returns the string
NEXTITEM Returns the name of the next item in the default navigation
sequence, as defined by the order of items in the Object Navigator.
NEXT_NAVIGATION_ITEM Returns the name of the item that is
defined as the "next navigation item" with respect to this current item.
POPUPMENU_CONTENT_ITEM Returns the setting for any of the
OLE popup menu item properties:
POPUPMENU_COPY_ITEM
POPUPMENU_CUT_ITEM
POPUPMENU_DELOBJ_ITEM
POPUPMENU_INSOBJ_ITEM
POPUPMENU_LINKS_ITEM
POPUPMENU_OBJECT_ITEM
POPUPMENU_PASTE_ITEM
POPUPEMNU_PASTESPEC_ITEM
Returns the VARCHAR2 string HIDDEN if the OLE popup menu item is
not displayed. Returns the VARCHAR2 string ENABLED if the OLE
popup menu item is displayed and enabled. Returns the VARCHAR2
string DISABLED if the OLE popup menu item is displayed and not
enabled. Returns the VARCHAR2 string UNSUPPORTED if the platform
is not Microsoft Windows.
PREVIOUSITEM Returns the name of the previous item.

193
PREVIOUS_NAVIGATION_ITEM Returns the name of the item that is
defined as the "previous navigation item" with respect to this current item.
PRIMARY_KEY Returns the VARCHAR2 value TRUE if the item is a
primary key, and the VARCHAR2 string FALSE if it is not.
PROMPT_ALIGNMENT_OFFSET Returns the distance between the
item and its prompt as a VARCHAR2 value.
PROMPT_BACKGROUND_COLOR The color of the object’s
background region.
PROMPT_DISPLAY_STYLE Returns the prompt’s display style, either
FIRST_RECORD, HIDDEN, or ALL_RECORDS.
PROMPT_EDGE Returns a value that indicates which edge the item’s
prompt is attached to, either START, END, TOP, or BOTTOM.
PROMPT_EDGE_ALIGNMENT Returns a value that indicates which
edge the item’s prompt is aligned to, either START, END, or CENTER.
PROMPT_EDGE_OFFSET Returns the distance between the item and
its prompt as a VARCHAR2 value.
PROMPT_FILL_PATTERN The pattern to be used for the object's fill
region. Patterns are rendered in the two colors specified by Background
Color and Foreground Color.
PROMPT_FONT_NAME The font family, or typeface, that should be
used for text in the object. The list of fonts available is system-dependent.
PROMPT_FONT_SIZE The size of the font, specified in points.
PROMPT_FONT_SPACING The width of the font, that is, the amount
of space between characters (kerning).
PROMPT_FONT_STYLE The style of the font.
PROMPT_FONT_WEIGHT The weight of the font.
PROMPT_FOREGROUND_COLOR The color of the object's
PROMPT_TEXT Returns the text label that displays for an item.
PROMPT_TEXT_ALIGNMENT Returns a value that indicates how the
prompt is justified, either START, LEFT, RIGHT, CENTER, or END.
PROMPT_VISUAL_ATTRIBUTE Returns a value that indicates the
prompt’s named visual attribute .
PROMPT_WHITE_ON_BLACK Specifies that the object is to appear
on a monochrome bitmap display device as white text on a black
background.
QUERYABLE Returns the VARCHAR2 string TRUE if the item can be
included in a query, and the VARCHAR2 string FALSE if it cannot.

194
QUERY_LENGTH Returns the number of characters an operator is
allowed to enter in the text item when the form is in Enter Query mode.
QUERY_ONLY Returns the VARCHAR2 string TRUE if property is set
to Yes for the item, and the VARCHAR2 string FALSE if the property is
set to No for the item.
RANGE_HIGH Returns the high value of the range limit. (Corresponds
to the Range property.)
RANGE_LOW Returns the low value of the range limit. (Corresponds to
the Range property.)
REQUIRED For multi-line text items, returns the VARCHAR2 string
TRUE if the REQUIRED property is set to true at the item level. Returns
the string FALSE if the property is set to false.
SCROLLBAR Returns the VARCHAR2 string TRUE if the Show Scroll
Bar property is Yes, and the VARCHAR2 string FALSE if the Show Scroll
Bar property is No.
SHOW_FAST_FORWARD_BUTTON Returns the VARCHAR2 value
TRUE if is displayed on the specified sound item, FALSE if not.
SHOW_PALETTE Returns the VARCHAR2 value TRUE if the image-
manipulation palette is displayed adjacent to the specified image item,
FALSE if not.
SHOW_PLAY_BUTTON Returns the VARCHAR2 value TRUE if is
displayed on the specified sound item, FALSE if not.
SHOW_RECORD_BUTTON Returns the VARCHAR2 value TRUE if
is displayed on the specified sound item, FALSE if not.
SHOW_REWIND_BUTTON Returns the VARCHAR2 value TRUE if
SHOW_SLIDER Returns the VARCHAR2 value TRUE if the Slider
position control is displayed on the specified sound item, FALSE if not.
SHOW_TIME_INDICATOR Returns the VARCHAR2 value TRUE if
SHOW_VOLUME_CONTROL Returns the VARCHAR2 value TRUE
if is displayed on the specified sound item, FALSE if not.
TOOLTIP_BACKGROUND_COLOR The color of the object’s
background region.
TOOLTIP_FILL_PATTERN The pattern to be used for the object’s fill
TOOLTIP_FONT_NAME The font family, or typeface, that should be
TOOLTIP_FONT_SIZE The size of the font, specified in points.

195
TOOLTIP_FONT_SPACING The width of the font, that is, the amount
TOOLTIP_FONT_STYLE The style of the font.
TOOLTIP_FONT_WEIGHT The weight of the font.
TOOLTIP_FOREGROUND_COLOR The color of the object’s
TOOLTIP_WHITE_ON_BLACK Specifies that the object is to appear
background.
TOOLTIP_TEXT Returns the item’s tooltip text.
UPDATE_ALLOWED Returns the VARCHAR2 string TRUE if the
UPDATE_ALLOWED property is set to true at the item level. Returns the
string FALSE if the property is set to false.
UPDATE_COLUMN Returns the VARCHAR2 string TRUE if Form
Builder should treat the item as updated, and FALSE if it should not.
UPDATE_NULL Returns the VARCHAR2 string TRUE if the item
should be updated only if it is NULL, and the VARCHAR2 string FALSE if
it can always be updated. (Corresponds to the Update if NULL property.)
UPDATE_PERMISSION Returns the VARCHAR2 string TRUE if the
UPDATE_PERMISSION property is set to ON, turning on the item's
UPDATEABLE and UPDATE_NULL properties. The VARCHAR2 string
FALSE indicates that UPDATEABLE and UPDATE_NULL are turned off.
VALIDATE_FROM_LIST Returns the VARCHAR2 string TRUE if
Form Builder should validate the value of the text item against the values in
the attached LOV; otherwise returns the VARCHAR2 string FALSE.
VISIBLE Returns the VARCHAR2 string TRUE if the property is set to
Yes for the item, and the VARCHAR2 string FALSE if the property is set
to No for the item.
in force. If no named visual attribute is assigned to the item, returns
DEFAULT for a default visual attribute.
WIDTH Returns the width of the item.
WINDOW_HANDLE Returns the a unique internal VARCHAR2
constant that is used to refer to objects. Returns the VARCHAR2 value ‘0’
if the platform is not Microsoft Windows.
WRAP_STYLE Returns VARCHAR2 if the item has wrap style set to
VARCHAR2, WORD if word wrap is set, NONE if no wrap style is
specified for the item.

196
X_POS Returns the x coordinate that reflects the current placement of the
item’s upper left corner relative to the upper left corner of the canvas.
Y_POS Returns the y coordinate that reflects the current placement of the
item’s upper left corner relative to the upper left corner of the canvas.
Usage Notes
If you attempt to use GET_ITEM_PROPERTY to get a property for an item that is not valid for that
item, an error will occur. For example, an error will occur when you attempt to get LIST from a radio
group because LIST is valid only for text items.
GET_ITEM_PROPERTY examples
/*
** Built-in: GET_ITEM_PROPERTY
** Example: Navigate to the next required item in the
** current block. */
PROCEDURE Go_Next_Required_Item IS
cur_blk VARCHAR2(40);
orig_itm VARCHAR2(80);
first_itm VARCHAR2(80);
wrapped BOOLEAN := FALSE;
found BOOLEAN := FALSE;
Exit_Procedure EXCEPTION;
/*
** Local function returning the name of the item after the
** one passed in. Using NVL we make the item after the
** last one in the block equal the first item again.
*/
FUNCTION The_Item_After(itm VARCHAR2)
RETURN VARCHAR2 IS
BEGIN
RETURN cur_blk||’.’||
NVL(Get_Item_Property(itm,NEXTITEM),
first_itm);
END;
BEGIN
cur_blk := :System.Cursor_Block;
first_itm := Get_Block_Property( cur_blk, FIRST_ITEM );
orig_itm := :System.Cursor_Item;
cur_itm := The_Item_After(orig_itm);
/*
** Loop until we come back to the item name where we started
*/
WHILE (orig_itm <> cur_itm) LOOP
/*
** If required item, set the found flag and exit procedure
*/
IF Get_Item_Property(cur_itm,REQUIRED) = ’TRUE’ THEN
found := TRUE;
RAISE Exit_Procedure;
END IF;
/*
** Setup for next iteration
*/
cur_itm := The_Item_After(cur_itm);
END LOOP;
/*

197
** If we get here we wrapped all the way around the
** block’s item names
*/
wrapped := TRUE;
RAISE Exit_Procedure;
EXCEPTION
WHEN Exit_Procedure THEN
/*
** If we found a required item and we didn’t come back
** to the item we started in, then navigate there
*/
IF found AND NOT wrapped THEN
Go_Item(cur_itm);
END IF;
END;

198
GET_LIST_ELEMENT_COUNT built-in
Description
Returns the total number of list item elements in a list, including elements with NULL values.
Syntax
FUNCTION GET_LIST_ELEMENT_COUNT
(list_id Item);
FUNCTION GET_LIST_ELEMENT_COUNT
(list_name VARCHAR2);
Returns VARCHAR2
Parameters
GET_LIST_ELEMENT_COUNT examples
/*
** Built-in: GET_LIST_ELEMENT_COUNT
** Example: Add an element to the list item. Before adding
** the element, verify that the element is not in
** the current list.
*/
DECLARE
total_list_count NUMBER(2);
loop_index_var NUMBER(2) := 1;
list_element VARCHAR2(50);
list_element_value VARCHAR2(50);
list_element_to_add VARCHAR2(50);
list_value_to_add VARCHAR2(50);
element_match VARCHAR2(5) := ’TRUE’;
value_match VARCHAR2(5) := ’TRUE’;
BEGIN
/*
** Determine the total number of list elements.
*/
total_list_count := Get_List_Element_Count(list_id);
/*
** Compare the current list item elements with the element that
** will be added.
*/
LOOP
list_element := Get_List_Element_Value(list_id,
loop_index_var);

199
loop_index_var := loop_index_var + 1;
IF list_element_to_add = list_element THEN
element_match := ’FALSE’;
END IF;
EXIT WHEN list_element = list_element_to_add OR
loop_index_var = total_list_count;
END LOOP;
/*
** Compare the current list item values with the value that
** will be added.
*/
loop_index_var := 1;
LOOP
list_element_value:= Get_List_Element_Value(list_id,
loop_index_var);
loop_index_var := loop_index_var + 1;
IF list_value_to_add = list_element_value THEN
value_match := ’FALSE’;
END IF;
EXIT WHEN list_element_value = list_value_to_add OR
loop_index_var = total_list_count;
END LOOP;
/*
** Add the element and value if it is not in the current list
*/
IF element_match AND value_match = ’TRUE’ THEN
Add_List_Element(list_id, list_name, list_element_to_add,
list_value_to_add);
END IF
END;

200
GET_LIST_ELEMENT_LABEL built-in
Description
Returns information about the requested list element label.
Syntax
FUNCTION GET_LIST_ELEMENT_LABEL
(list_id ITEM,
list_name VARCHAR2,
list_index NUMBER);
FUNCTION GET_LIST_ELEMENT_LABEL
list_index NUMBER);
Returns VARCHAR2
Parameters
list_index Specifies the list index value. The list index is 1 based. If the index is
greater than the count of elements in the list,
GET_LIST_ELEMENT_LABEL will fail.
Usage Notes
The value associated with a list item element is not necessarily the list item’s current value. That is, the
value of :block.list_item.
GET_LIST_ELEMENT_LABEL examples
/*
** Built-in: GET_LIST_ELEMENT_LABEL
** Example: See GET_LIST_ELEMENT_COUNT
*/

201
GET_LIST_ELEMENT_VALUE built-in
Description
Returns the value associated with the specified list item element.
Syntax
FUNCTION GET_LIST_ELEMENT_VALUE
(list_id ITEM,
list_index NUMBER);
FUNCTION GET_LIST_ELEMENT_VALUE
list_index NUMBER);
Returns VARCHAR2
Parameters
list_index Specifies the list index value. The list index is 1 based. It will return a
string containing the value of the requested element. If the index is greater
than the count of elements in the list, GET_LIST_ELEMENT_VALUE
will fail.
GET_LIST_ELEMENT_VALUE examples
/*
** Built-in: GET_LIST_ELEMENT_VALUE
** Example: See GET_LIST_ELEMENT_COUNT
*/

202
GET_LOV_PROPERTY built-in
Description
Returns information about a specified list of values (LOV).
You must issue a call to the built-in once for each property value you want to retrieve.
Syntax
FUNCTION GET_LOV_PROPERTY
(lov_id, property LOV);
FUNCTION GET_LOV_PROPERTY
(lov_name VARCHAR2,
property NUMBER);
Returns VARCHAR2
Parameters
lov_id Specifies the unique ID that Form Builder assigns the object at the time it
creates it. Use the FIND_LOV built-in to return the ID to an appropriately
typed variable. The data type of the ID is LOV.
lov_name Specifies the name that you gave the object when creating it.
property Specifies the property you want to set for the given LOV. The possible
properties are as follows:
AUTO_REFRESH Returns the VARCHAR2 string TRUE if the property
is set to Yes; that is, if Form Builder re-executes the query each time the
LOV is invoked. Returns the VARCHAR2 string FALSE if the property is
set to No.
GROUP_NAME Returns the name of the record group currently
associated with this LOV. The data type of the name is VARCHAR2.
HEIGHT Returns the height of the LOV. The size of the units depends
on the Coordinate System and default font scaling you specified for the
form.
WIDTH Returns the width of the LOV. The size of the units depends on
the Coordinate System and default font scaling you specified for the form.
LOV’s upper left corner relative to the upper left corner of the screen.
LOV’s upper left corner relative to the upper left corner of the screen.

203
GET_LOV_PROPERTY examples
/*
** Built-in: GET_LOV_PROPERTY
** Example: Can get the width/height of the LOV.
*/
DECLARE
the_width NUMBER;
the_height NUMBER;
lov_id LOV;
BEGIN
lov_id := Find_LOV(’My_LOV_1’);
the_width := Get_LOV_Property(lov_id, WIDTH);
the_height := Get_LOV_Property(lov_id,HEIGHT);
END;

204
GET_MENU_ITEM_PROPERTY built-in
Description
Returns the state of the menu item given the specific property. You can use this built-in function to get
the state and then you can change the state of the property with the SET_MENU_ITEM_PROPERTY
built-in.
Syntax
FUNCTION GET_MENU_ITEM_PROPERTY
(menuitem_id MenuItem,
property NUMBER);
FUNCTION GET_MENU_ITEM_PROPERTY
(menu_name.menuitem_name VARCHAR2,
property NUMBER);
Returns VARCHAR2
Parameters
menuitem_id The unique ID Form Builder assigns to the menu item when you create it.
Use the FIND_MENU_ITEM built-in to return the ID to an appropriately
typed variable. Datatype is MenuItem.
menu_name. menuitem_nameThe name you gave the menu item when you created it. If you specify the
menu item by name, include the qualifying menu name, for example,
menu_name.menuitem_name. Datatype is VARCHAR2.
property Specify one of the following constants to retrieve information about the
menu item:
CHECKED Returns the VARCHAR2 string TRUE if a check box menu
item is checked, FALSE if it is unchecked. Returns the VARCHAR2 string
TRUE if a radio menu item is the selected item in the radio group, FALSE
if some other radio item in the group is selected. Returns TRUE for other
menu item types.
ENABLED Returns the VARCHAR2 string TRUE if a menu item is
enabled, FALSE if it is disabled (thus grayed out and unavailable).
menu item having the Icon in Menu property set to TRUE.
LABEL Returns the VARCHAR2 string for the menu item label.
VISIBLE Returns the VARCHAR2 string TRUE if a menu item is visible,
FALSE if it is hidden from view.
GET_MENU_ITEM_PROPERTY examples

205
/*
** Built-in: GET_MENU_ITEM_PROPERTY
** Example: Toggle the enabled/disable status of the menu
** item whose name is passed in. Pass in a string
** of the form ’MENUNAME.MENUITEM’.
*/
PROCEDURE Toggle_Enabled( menuitem_name VARCHAR2) IS
mi_id MenuItem;
BEGIN
mi_id := Find_Menu_Item( menuitem_name );
IF Get_Menu_Item_Property(mi_id,ENABLED) = ’TRUE’ THEN
Set_Menu_Item_Property(mi_id,ENABLED,PROPERTY_FALSE);
ELSE
Set_Menu_Item_Property(mi_id,ENABLED,PROPERTY_TRUE);
END IF;
END;

206
GET_MESSAGE built-in
Description
Returns the current message, regardless of type.
Syntax
FUNCTION GET_MESSAGE;
Returns VARCHAR2
Parameters
none
GET_MESSAGE restrictions
GET_MESSAGE is only instantiated when a message is directed to the display device, either by Form
Builder or by a call to the MESSAGE built-in. If you redirect messages using the On-Message trigger, a
call to GET_MESSAGE does not return a value. Refer to the On-Message trigger for more information.
GET_MESSAGE examples
/*
** Built-in: GET_MESSAGE
** Example: Capture the contents of the Message Line in a
** local variable
*/
DECLARE
string_var VARCHAR2(200);
BEGIN
string_var := Get_Message;
END;

207
GET_OLE_<proptype> built-in
Description
Obtains an OLE property.
There are four versions of the function (denoted by the value in proptype), one for each of the argument
types CHAR, NUM, OBJ, and VAR.
Syntax
FUNCTION GET_OLE_CHAR
RETURN oleprop VARCHAR2;
...or...
FUNCTION GET_OLE_NUM
RETURN oleprop NUMBER;
...or...
FUNCTION GET_OLE_OBJ
RETURN oleprop OLEOBJ;
...or...
FUNCTION GET_OLE_VAR
(obj OLEOBJ, memberid PLS_INTEGER,
RETURN oleprop OLEVAR;
Returns the OLE property. Note that the type varies according to the form of the function chosen.
Parameters
obj A pointer to the OLE object.
memberid The member ID of the OLE property.
persistenc
e
Controls the persistence of the OLEVAR argument after
its retrieval. This is an optional parameter; if not
specified, the default value is FALSE (that is, non-
persistent).
Usage Notes
• If INIT_OLEARGS and ADD_OLEARG calls precede this GET_OLE_type call, and there have
been no intervening GET_OLE, SET_OLE, or CALL_OLE calls, then this call will retrieve the
property by using the arguments specified in those INIT_OLEARGS and ADD_OLEARG calls.
• In contrast to a returned OLEVAR argument, whose persistence can be user-controlled, a returned
OLEOBJ argument is always set to be non-persistent.

208
GET_OLEARG_<type> built-in
Description
Obtains the nth argument from the OLE argument stack.
There are four versions of the function (denoted by the value in type), one for each of the argument types
CHAR, NUM, OBJ, and VAR.
Syntax
FUNCTION GET_OLEARG_CHAR
(which NUMBER)
RETURN olearg VARCHAR2;
...or...
FUNCTION GET_OLEARG_NUM
(which NUMBER)
RETURN olearg NUMBER;
...or...
FUNCTION GET_OLEARG_OBJ
(which NUMBER)
RETURN olearg OLEOBJ;
...or...
FUNCTION GET_OLEARG_VAR
(which NUMBER, persistence BOOLEAN)
RETURN olearg OLEVAR;
Returns the indicated argument. Note that the type varies according to the form of the function
used.
Parameters
which A relative number indicating which argument in the OLE
argument stack should be retrieved.
persistence Controls the persistence of the OLEVAR argument after
its retrieval. This is an optional parameter; if not
specified, the default value is FALSE (that is, non-
persistent).
Usage Notes
• Use this function to retrieve arguments whose value might change as a result of the method call.
• In contrast to a returned OLEVAR argument, whose persistence can be user-controlled, a returned
OLEOBJ argument is always set to be non-persistent.

209
GET_OLE_MEMBERID built-in
Description
Obtains the member ID of a named method or property of an OLE object.
Syntax
FUNCTION GET_OLE_MEMBERID
(obj OLEOBJ, name VARCHAR2)
RETURN memberid PLS_INTEGER;
Returns member ID of the method or property
Parameters
obj Pointer to the OLE object.
name Name of the object’s method or property.
Usage Notes
The member ID is a hard-coded value. The result returned may vary depending on the language used to
run the OLE server.

210
GET_PARAMETER_ATTR built-in
Description
Returns the current value and type of an indicated parameter in an indicated parameter list.
Syntax
FUNCTION GET_PARAMETER_ATTR
(list VARCHAR2,
key VARCHAR2,
paramtype NUMBER,
value VARCHAR2);
FUNCTION GET_PARAMETER_ATTR
(name VARCHAR2,
key VARCHAR2,
paramtype NUMBER,
value VARCHAR2);
Built-in Type unrestricted procedure that returns two OUT parameters
Parameters
list or name Specifies the parameter list to which the parameter is assigned. The actual
parameter can be either a parameter list ID of type PARAMLIST, or the
key The VARCHAR2 name of the parameter.
paramtype An OUT parameter of type NUMBER. The actual parameter you supply
must be a variable of type NUMBER, and cannot be an expression.
Executing the parameter sets the value of the variable to one of the
following numeric constants:
DATA_PARAMETER Indicates that the parameter’s value is the name of
a record group.
TEXT_PARAMETER Indicates that the parameter’s value is an actual
data value.
value An OUT parameter of type VARCHAR2. If the parameter is a data type
parameter, the value is the name of a record group. If the parameter is a
text parameter, the value is an actual text parameter.
For an overview of using OUT parameters with PL/SQL procedures, refer to the PL/SQL 2.0 User’s
Guide and Reference.

211
GET_PARAMETER_LIST built-in
Description
Searches the list of parameter lists and returns a parameter list ID when it finds a valid parameter list
with the given name. You must define an variable of type PARAMLIST to accept the return value. This
function is similar to the FIND_ functions available for other objects.
Syntax
FUNCTION GET_PARAMETER_LIST
(name VARCHAR2);
Returns ParamList
Parameters
name Specifies a valid VARCHAR2 parameter list name.
GET_PARAMETER_LIST examples
See CREATE_PARAMETER_LIST

212
GET_RADIO_BUTTON_PROPERTY built-in
Description
Returns information about a specified radio button.
Syntax
FUNCTION GET_RADIO_BUTTON_PROPERTY
(item_id ITEM,
button_name VARCHAR2,
property NUMBER);
FUNCTION GET_RADIO_BUTTON_PROPERTY(
item_name VARCHAR2,
property NUMBER);
Returns VARCHAR2
Parameters
item_id Specifies the radio group item ID. Form Builder assigns the unique ID at
the time it creates the object. Use the FIND_ITEM built-in to return the
ID to an appropriately typed variable. The data type of the ID is ITEM.
item_name Specifies the name of the radio group. The radio group is the owner or
parent of its subordinate radio buttons. The data type of the name is
VARCHAR2.
button_name Specifies the name of the radio button whose property you want. The data
type of the name is VARCHAR2.
property Specifies the property for which you want the current state. The possible
property constants you can indicate are as follows:
ENABLED Returns the VARCHAR2 string TRUE if property is set to
Yes, and the VARCHAR2 string FALSE if property is set to No.
Foreground Color.

213
in the item.
HEIGHT Returns the height of the radio button. The value is returned as
a VARCHAR2 and is expressed in the units as set for the form by the form
module Coordinate System property.
LABEL Returns the actual string label for that radio button.
background region.
PROMPT_FILL_PATTERN The pattern to be used for the object’s fill
PROMPT_FOREGROUND_COLOR The color of the object’s
background.
VISIBLE Returns the VARCHAR2 string TRUE if property is set to Yes,
returns and the VARCHAR2 string FALSE if property is set to No.
in force. If no named visual attribute is assigned to the radio button, returns
attribute.
WIDTH Returns the width of the radio button, including the label part.
The value is returned as a VARCHAR2 and is expressed in the units as set
for the form by the form module Coordinate System property.
constant that is used to refer to objects. Returns the number 0 if the
platform is not Microsoft Windows.
button’s upper left corner relative to the upper left corner of the canvas.

214
The value is returned as a VARCHAR2 and is expressed in the units
defined by the form module Coordinate System property.
button’s upper left corner relative to the upper left corner of the canvas.
The value is returned as a VARCHAR2 and is expressed in the units
defined by the form module Coordinate System property.
GET_RADIO_BUTTON_PROPERTY examples
/*
** Built-in: GET_RADIO_BUTTON_PROPERTY
** Example: Determine whether a given radio button is
** displayed and has a particular visual
** attribute.
*/
DECLARE
it_id Item;
disp VARCHAR2(5);
va_name VARCHAR2(40);
BEGIN
it_id := Find_Item(’My_Favorite_Radio_Grp’);
disp := Get_Radio_Button_Property( it_id, ’REJECTED’,
VISIBLE);
va_name := Get_Radio_Button_Property( it_id, ’REJECTED’,
VISUAL_ATTRIBUTE);
IF disp = ’TRUE’ AND va_name = ’BLACK_ON_PEACH’ THEN
Message(’You win a prize!’);
ELSE
Message(’Sorry, no luck today.’);
END IF;
END;

215
GET_RECORD_PROPERTY built-in
Description
Returns the value for the given property for the given record number in the given block. The three
parameters are required. If you do not pass the proper constants, Form Builder issues an error. For
example, you must pass a valid record number as the argument to the record_number parameter.
Syntax
FUNCTION GET_RECORD_PROPERTY
(record_number NUMBER,
block_name VARCHAR2,
property NUMBER);
Returns VARCHAR2
Parameters
record_number Specifies the record in a block for which you want property information.
The number must correspond to a record number.
block_name Specifies the block containing the target record.
property Specifies the property for which you want the current state. One property
constant is supported: Status.
STATUS returns NEW if the record is marked as new and there is no
changed record in the block. Returns CHANGED if the record is marked
as changed. Returns QUERY if the record is marked as query. Returns
INSERT if the record is marked as insert.
Usage Notes
The following table illustrates the situations which return a NEW status.
Record
Status
Block
Status
Form
Status
Created record with no modified
fields
NEW <N|Q|C> <N|Q|C>
...and all records in current
block are NEW
NEW NEW <N|Q|C>
...and all blocks in current form
are NEW
NEW NEW NEW

216
The following table illustrates the effect on record, block, and form status of changes to base table items
and control item in base table and control blocks.
Type of
Block/Type of
Item Changed
Record
Status
Before
Change
Record
Status
After
Change
Block
Status
Form
Status
In a Base Table
Block: Change a
Base Table Item
NEW INSERT CHANGED CHANGED
In a Base Table
Block:Change a
Base Table Item
QUERY CHANGED CHANGED CHANGED
In a Base Table
Block:Change a
Control Item
QUERY QUERY <Q|C> <Q|C>
...and no record
in current block
is changed
QUERY QUERY <Q|C>
...and no block
in current form
is changed
QUERY QUERY QUERY
In a Base Table
Block: Change a
Control Item
NEW INSERT <Q|C> <Q|C>
In a Control
Block: Change
a Control Item
NEW INSERT <Q> <Q|C>
...and no record
in current block
is changed
INSERT QUERY <Q|C>
...and no block
in current form
is changed
INSERT QUERY QUERY
Note:
In general, any assignment to a database item will change a record’s status from QUERY to CHANGED
(or from NEW to INSERT), even if the value being assigned is the same as the previous value. Passing
an item to a procedure as OUT or IN OUT parameter counts as an assignment to it.
Both GET_RECORD_PROPERTY and the system variable SYSTEM.RECORD_STATUS return the
status of a record in a given block, and in most cases, they return the same status. However, there are
specific cases in which the results may differ.

217
GET_RECORD_PROPERTY always has a value of NEW, CHANGED, QUERY, or INSERT, because
GET_RECORD_PROPERTY returns the status of a specific record without regard to the processing
sequence or whether the record is the current record.
SYSTEM.RECORD_STATUS, on the other hand, can in certain cases return a value of NULL, because
SYSTEM.RECORD_STATUS is undefined when there is no current record in the system. For example,
in a When-Clear-Block trigger, Form Builder is at the block level in its processing sequence, so there is
no current record to report on, and the value of SYSTEM.RECORD_STATUS is NULL.
GET_RECORD_PROPERTY examples
/*
** built-in: GET_RECORD_PROPERTY
** Example: Obtain the status of a record in given block
*/
BEGIN
IF Get_Record_Property(1,’orders’,STATUS) = ’NEW’ AND
Get_Record_Property(1,’customers’,STATUS) = ’NEW’ THEN
Message(’You must enter a customer and order first!’);
END IF;
END;

218
GET_RELATION_PROPERTY built-in
Description
Returns the state of the given relation property.
Syntax
FUNCTION GET_RELATION_PROPERTY
(relation_id Relation,
property NUMBER);
FUNCTION GET_RELATION_PROPERTY
(relation_name VARCHAR2,
property NUMBER);
Returns VARCHAR2
Parameters
relation_id Specifies the unique ID Form Builder assigns when it creates the relation.
Use the FIND_RELATION built-in to return the ID to an appropriately
typed variable. The data type of the ID is Relation.
relation_name Specifies the VARCHAR2 name you gave to the relation when you defined
it, or the name that Form Builder assigned to the relation when created.
property Specifies the property for which you want the current state. The property
constants you can use are as follows:
AUTOQUERY Returns the VARCHAR2 value TRUE if the Automatic
Query relation property is Yes, FALSE if it is No. When the Deferred
relation property is set to Yes, this property determines whether Form
Builder automatically populates the detail block when a different record
becomes the current record in the master block.
DEFERRED_COORDINATION Returns the VARCHAR2 value TRUE
if the Deferred relation property is Yes, FALSE if it is No. This property
determines whether the detail block is to be immediately coordinated with
the current master record, or left clear until the operator navigates to the
detail block.
DETAIL_NAME Returns the VARCHAR2 name of the detail block in the
given master-detail relationship.
MASTER_DELETES Returns one of the following VARCHAR2 values
to indicate the current setting of the block’s Delete Record Behavior
property: NON_ISOLATED, ISOLATED, or CASCADING.
MASTER_NAME Returns the VARCHAR2 name of the master block in
the given master-detail relationship.

219
NEXT_DETAIL_RELATION Returns the VARCHAR2 name of the
next detail relation, if one exists. To get the name of the first detail for a
given block, issue a call to GET_BLOCK_PROPERTY. Returns NULL if
none exists.
NEXT_MASTER_RELATION Returns the VARCHAR2 name of the
next relation, if one exists. To get the name of the first relation for a given
block, issue a call to GET_BLOCK_PROPERTY. Returns NULL if one
does not exist.
PREVENT_MASTERLESS_OPERATION Returns the VARCHAR2
value TRUE if this relation property is Yes, FALSE if it is No. When set to
Yes, Form Builder does not allow records to be inserted in the detail block
when there is no master record in the master block, and does not allow
querying in the detail block when there is no master record from the
database.
GET_RELATION_PROPERTY examples
/*
** Built-in: GET_RELATION_PROPERTY
** Example: If the relation is not deferred, then go
** coordinate the detail block. Otherwise, mark
** the detail block as being in need of
** coordination for an eventual deferred query.
*/
PROCEDURE Query_The_Details(rel_id Relation,
detail VARCHAR2) IS
BEGIN
IF Get_Relation_Property(rel_id, DEFERRED_COORDINATION)
= ’FALSE’ THEN
Go_Block(detail);
END IF;
Execute_Query;
ELSE
Set_Block_Property(detail, coordination_status,
NON_COORDINATED);
END IF;
End;

220
GET_REPORT_OBJECT_PROPERTY built-in
Description
Programmatically obtain a property of a report object.
Syntax
FUNCTION GET_REPORT_OBJECT_PROPERTY
(report_id REPORT_OBJECT,
property NUMBER
);
FUNCTION GET_REPORT_OBJECT_PROPERTY
(report_name VARCHAR2,
property NUMBER
);
Parameters
report_id Specifies the unique ID of the report. You can get the report ID for a
particular report using FIND_REPORT_OBJECT .
report_name Specifies the unique name of the report.
property One of the following constants:
REPORT_EXECUTION_MODE: Returns a string value of the report
execution mode, either BATCH or RUNTIME
REPORT_COMM_MODE: Returns a string value of the report
communication mode, either SYNCHRONOUS or ASYNCHRONOUS
REPORT_DESTYPE: Returns a string value of the report destination type,
either PREVIEW, FILE, PRINTER, MAIL, CACHE or SCREEN
REPORT_FILENAME: Returns a string value of the report filename
REPORT_SOURCE_BLOCK: Returns a string value of the report source
block name
REPORT_QUERY_NAME: Returns a string value of the report query
name
REPORT_DESNAME: Returns a string value of the report destination
name
REPORT_DESFORMAT: Returns a string value of the report destination
format
REPORT_SERVER: Returns a string value of the report server name
REPORT_OTHER: Returns a string value of the other user-specified report
properties

221
Usage Notes
• GET_REPORT_OBJECT_PROPERTY returns a string value for all properties. In contrast,
SET_REPORT_OBJECT_PROPERTY sets properties using constant or string values. The value
type depends on the particular property being set.
GET_REPORT_OBJECT_PROPERTY examples
DECLARE
report_prop VARCHAR2(20);
BEGIN
report_prop := get_report_object_property(repid,
REPORT_EXECUTION_MODE);
message(’REPORT EXECUTION MODE PROPERTY IS ’ || report_prop);
REPORT_COMM_MODE);
message(’REPORT COMM_MODE PROPERTY IS ’ || report_prop);
REPORT_DESTYPE);
message(’REPORT DESTYPE PROPERTY IS ’ || report_prop);
REPORT_FILENAME);
message(’REPORT_FILENAME PROPERTY IS ’ || report_prop);
END;

222
GET_TAB_PAGE_PROPERTY built-in
Description
Returns property values for a specified tab page.
Syntax
FUNCTION GET_TAB_PAGE_PROPERTY
(tab_page_id TAB_PAGE,
property NUMBER);
FUNCTION GET_TAB_PAGE_PROPERTY
(tab_page_name VARCHAR2,
property NUMBER);
Returns VARCHAR2
Parameters
tab_page_id The unique ID Form Builder assigned to the tab page object when you
created it. Use the FIND_TAB_PAGE built-in to return the ID to a
variable of datatype TAB_PAGE.
tab page_name The name you gave the tab page object when you created it. Note: if two
tab pages in the same form module share the same name, you must provide
the canvas and tab page (e.g., CVS_1.TAB_PG_1).
property The property the value of which you want to get for the given tab page.
The possible properties are as follows:
CANVAS_NAME Returns the VARCHAR2 name of the canvas to which
the tab page belongs.
ENABLED Returns the VARCHAR2 string TRUE if a tab page is
enabled, FALSE if it is disabled (i.e., greyed out and unavailable).
Foreground Color.

223
in the item.
LABEL Returns the VARCHAR2 string for the tab page label.
VISIBLE Returns the VARCHAR2 value TRUE if the tab page is visible,
FALSE if it is not. A tab page is reported visible if it is currently mapped
to the screen, even if it is entirely hidden behind another tab page.
in force. If no named visual attribute is assigned to the tab page, returns
attribute.
GET_TAB_PAGE_PROPERTY examples
/* Use FIND_TAB_PAGE and GET_TAB_PAGE_PROPERTY to check
** if a tab page is enabled:
*/
DECLARE
tp_id TAB_PAGE;
live VARCHAR2(32);
BEGIN
tp_id := FIND_TAB_PAGE(’tab_page_1’);
live := GET_TAB_PAGE_PROPERTY(tp_id, enabled);
END;

224
GET_TREE_NODE_PARENT built-in
Description
Returns the parent of the specified node.
Syntax
FUNCTION GET_TREE_NODE_PARENT
(item_name VARCHAR2
node NODE);
FUNCTION GET_TREE_NODE_PARENT
(item_id ITEM
node NODE);
Returns NODE
Enter Query Mode no
Parameters
GET_TREE_NODE_PARENT examples
/*
** Built-in: GET_TREE_NODE_PARENT
*/
-- This code could be used in a WHEN-TREE-NODE-SELECTED
-- trigger to locate the parent of the node that was
-- clicked on.
DECLARE
htree ITEM;
parent_node FTREE.NODE;
BEGIN
-- Get the parent of the node clicked on.

225
parent_node := Ftree.Get_Tree_Node_Parent(htree,
:SYSTEM.TRIGGER_NODE);
...
END;

226
GET_TREE_NODE_PROPERTY built-in
Description
Returns the value of the specified property of the hierarchical tree node.
Syntax
FUNCTION GET_TREE_NODE_PROPERTY
node NODE,
property NUMBER);
FUNCTION GET_TREE_NODE_PROPERTY
(item_id ITEM,
node NODE,
property NUMBER);
Returns VARCHAR2
Enter Query Mode no
Parameters
property Specify one of the following properties:
NODE_STATE Returns the state of the hierarchical
tree node. This is either EXPANDED_NODE,
COLLAPSED_NODE, or LEAF_NODE.
NODE_DEPTH Returns the nesting level of the
hierarchical tree node.
NODE_LABEL Returns the label
NODE_ICON Returns the icon name
NODE_VALUE Returns the value of the hierarchical
tree node.
GET_TREE_NODE_PROPERTY examples
/*

227
** Built-in: GET_TREE_NODE_PROPERTY
*/
-- trigger to return the value of the node that was
-- clicked on.
DECLARE
htree ITEM;
node_value VARCHAR2(100);
BEGIN
-- Find the value of the node clicked on.
node_value := Ftree.Get_Tree_Node_Property(htree,
:SYSTEM.TRIGGER_NODE, Ftree.NODE_VALUE);
...
END;

228
GET_TREE_PROPERTY built-in
Description
Returns property values of the specified hierarchical tree.
Syntax
FUNCTION GET_TREE_PROPERTY
property NUMBER);
FUNCTION GET_TREE_PROPERTY
(item_id ITEM,
property NUMBER);
Returns VARCHAR2
Enter Query Mode no
Parameters
item_name Specifies the name you gave the object when you created
it. The data type of the name is VARCHAR2 string.
DATASOURCE Returns the source used to initially
populate the hierarchical tree, either in Form Builder or
by using the SET_TREE_PROPERTY built-in. Returns
EXTERNAL if neither property was set in Form Builder.
RECORD_GROUP Returns the RecordGroup used to
initially populate the hierarchical tree, either in Form
Builder or by using the SET_TREE_PROPERTY built-
in. This may be a null string.
QUERY_TEXT Returns the text of the query used to
initially populate the hierarchical tree, either in Form
Builder or by using the SET_TREE_PROPERTY built-
in.. This may be a null string.
NODE_COUNT Returns the number of rows in the
hierarchical tree data set.
SELECTION_COUNT Returns the number of selected
rows in the hierarchical tree.
ALLOW_EMPTY_BRANCHES Returns the character

229
string TRUE or FALSE.
ALLOW_MULTI-SELECT Returns the character
string TRUE or FALSE.
Usage Notes
The values returned by datasource RECORD_GROUP and QUERY_TEXT do not necessarily reflect
the current data or state of the tree. The values returned are those that were set in Form Builder and not
those set using the SET_TREE_PROPERTY built-in.
GET_TREE_PROPERTY examples
/*
** Built-in: GET_TREE_PROPERTY
*/
-- This code could be used to find out how many nodes are
-- in a given tree.
DECLARE
htree ITEM;
node_count NUMBER;
BEGIN
-- Get the node count of the tree.
node_count := Ftree.Get_Tree_Property(htree,
Ftree.NODE_COUNT);
...
END;

230
GET_TREE_SELECTION built-in
Description
Returns the data node indicated by selection. Selection is an index into the list of selected nodes.
Syntax
FUNCTION GET_TREE_SELECTION
selection NUMBER);
FUNCTION GET_TREE_SELECTION
(item_id ITEM,
selection NUMBER);
Returns FTREE.NODE
Enter Query Mode no
Parameters
selection Specifies the selection of a single node.
GET_TREE_SELECTION examples
/*
** Built-in: GET_TREE_SELECTION
*/
-- This code will process all tree nodes marked as selected.
See the
-- Ftree.Set_Tree_Selection built-in for a definition of
"selected".
DECLARE
htree ITEM;
num_selected NUMBER;
current_node FTREE.NODE;
BEGIN
-- Find the number of nodes marked as selected.
num_selected := Ftree.Get_Tree_Property(htree,

231
Ftree.SELECTION_COUNT);
-- Loop through selected nodes and process them. If you are
deleting
-- nodes, be sure to loop in reverse!
FOR j IN 1..num_selected LOOP
current_node := Ftree.Get_Tree_Selection(htree, j);
...
END LOOP;
END;

232
GET_VA_PROPERTY built-in
Description
Returns visual attribute property values for the specified property.
Syntax
FUNCTION GET_VA_PROPERTY
(va_id VISUALATTRIBUTE
property NUMBER);
FUNCTION GET_VA_PROPERTY
(va_name VARCHAR2
property NUMBER);
Returns VARCHAR2
Parameters
va_id The unique ID Form Builder assinged to the visual
attribute when you created it. The data type is
VISUALATTRIBUTE.
BACKGROUND_COLOR The color of the object’s
background region.
FILL_PATTERN The pattern to be used for the object’s
fill region. Patterns are rendered in the two colors
specified by Background Color and Foreground Color.
FONT_NAME The font family, or typeface, that should
be used for text in the object. The list of fonts available
is system-dependent.
FONT_SIZE The size of the font, specified in hundreds
of points. For example, 8pt. would be 800.
FONT_SPACING The width of the font, that is, the
FOREGROUND_COLOR The color of the object’s
foreground region. For items, the Foreground Color
attribute defines the color of text displayed in the item.

233
WHITE_ON_BLACK Specifies that the object is to
appear on a monochrome bitmap display device as white
text on a black background.

234
GET_VAR_BOUNDS built-in
Description
Obtains the bounds of an OLE variant’s array.
Syntax
PROCEDURE GET_VAR_BOUNDS
(var OLEVAR, bounds OLE_SAFEARRAYBOUNDS);
Parameters
var The variant.
bounds The PL/SQL table that is populated with the bounds of
the array.
For more information about the contents and layout of
this parameter, see Array Types for OLE Support

235
GET_VAR_DIMS built-in
Description
Determines if an OLE variant is an array, and if so, obtains the number of dimensions in that array.
Syntax
FUNCTION GET_VAR_DIMS
(var OLEVAR)
RETURN vardims PLS_INTEGER;
Returns A value of zero (0) if the variant is not an array. Otherwise, the return value is the number of
dimensions in the array.
Parameters
var The variant.

236
GET_VAR_TYPE built-in
Description
Obtains the type of an OLE variant.
Syntax
FUNCTION GET_VAR_TYPE
(var OLEVAR)
RETURN vartype VT_TYPE;
Returns type of the variable
Parameters
var The variant.
vartype Type of the variant.
Usage Notes
A list of the supported VT_TYPEs can be found in OLE Variant Types .

237
GET_VERB_COUNT built-in
Description
Returns the number of verbs that an OLE server recognizes. An OLE verb specifies the action that you
can perform on an OLE object, and the number of verbs available depends on the OLE server. The
number of verbs is returned as a VARCHAR2 string and must be converted to NUMBER for use in
determining the verb index and verb name for each verb. You must define an appropriately typed
variable to accept the return value.
Syntax
FUNCTION GET_VERB_COUNT
(item_id Item);
FUNCTION GET_VERB_COUNT
Returns VARCHAR2
Enter Query Mode no
Parameters
GET_VERB_COUNT restrictions
GET_VERB_COUNT examples
/*
** Built-in: GET_VERB_COUNT
** Example: Obtains the number of verbs that the OLE server
** issues and recognizes when executed from the OLE container.
*/
DECLARE
item_id ITEM;
verb_cnt_str VARCHAR(20);
verb_cnt NUMBER;
verb_name VARCHAR(20);
loop_cntr NUMBER;
BEGIN

238
ELSE
verb_cnt_str := Get_Verb_Count(item_id);
verb_cnt := TO_NUMBER(verb_cnt_str);
FOR loop_cntr in 1..verb_cnt LOOP
verb_name := Get_Verb_Name(item_id,loop_cntr);
IF verb_name = ’Edit’ THEN
Exec_Verb(item_id,verb_name);
END IF;
END LOOP;
END IF;
END;

239
GET_VERB_NAME built-in
Description
Returns the name of the verb that is associated with the given verb index. An OLE verb specifies the
action that you can perform on an OLE object, and each OLE verb has a corresponding OLE verb index.
You must define an appropriately typed variable to accept the return value.
Syntax
FUNCTION GET_VERB_NAME
(item_id Item,
FUNCTION GET_VERB_NAME
Returns VARCHAR 2
Enter Query Mode no
Parameters
verb_index Specifies the numeric index of a verb. Use the FIND_OLE_VERB built-in
to obtain this value. The data type of index is VARCHAR2.
GET_VERB_NAME restrictions
GET_VERB_NAME examples
/*
** Built-in: GET_VERB_COUNT
** Example: See EXEC_VERB and GET_VERB_COUNT
*/

240
GET_VIEW_PROPERTY built-in
Description
Returns the indicated property setting for the indicated canvas.
Syntax
FUNCTION GET_VIEW_PROPERTY
(view_id ViewPort,
property NUMBER);
FUNCTION GET_VIEW_PROPERTY
(view_name VARCHAR2,
property NUMBER);
Returns VARCHAR2
Parameters
view_id Specifies the unique ID that Form Builder assigns the canvas when it
creates the object. Use the FIND_VIEW built-in to return the ID to an
appropriately typed variable. The data type of the ID is ViewPort.
view_name Specifies the name that you gave the object when defining it.
property Specifies the property whose state you want to get for the given canvas.
You must make a separate call to GET_VIEW_PROPERTY for each
property you need, as shown in the example. You can enter one of the
following constants to obtain return values:
HEIGHT Returns the height of the view. For a content view, the height of
the view is actually the height of the window in which the view is currently
displayed. The size of each unit depends on how you defined the
Coordinate System property for the form module.
VIEWPORT_X_POS For a stacked canvas, returns the x coordinate that
reflects the current placement of the view’s upper left corner relative to the
upper left corner of the window’s current content canvas. For a content
view, returns 0. The value is returned as a VARCHAR2 and is expressed in
the units defined by the form module Coordinate System property.
VIEWPORT_Y_POS For a stacked canvas, returns the y coordinate that
upper left corner of the window’s current content canvas. For a content
view, returns 0. The value is returned as a VARCHAR2 and is expressed in
the units defined by the form module Coordinate System property.
VIEWPORT_X_POS_ON_CANVAS Returns the x coordinate that

241
upper left corner of its canvas. The value is returned as a VARCHAR2 and
is expressed in the units defined by the form module Coordinate System
property.
VIEWPORT_Y_POS_ON_CANVAS Returns the y coordinate that
upper left corner of its canvas. The value is returned as a VARCHAR2 and
is expressed in the units defined by the form module Coordinate System
property.
VISIBLE Returns the VARCHAR2 value TRUE if the view is visible,
FALSE if it is not. A view is reported visible when it is a) in front of all
other views in the window or b) only partially obscured by another view. A
view is reported not visible when it is a) a stacked view that is behind the
content view or b) completely obscured by a single stacked view. Note that
this property is independent of the current window display state. Thus a
view can be reported visible even when its window is currently hidden or
iconified.
WIDTH Returns the width of the view. For a content view, the width of
the view is actually the width of the window in which the view is currently
displayed. The size of each unit depends on how you defined the
Coordinate System property for the form module.
WINDOW_NAME Returns the name of the window where this canvas is
displayed.
GET_VIEW_PROPERTY examples
/*
** Built-in: GET_VIEW_PROPERTY
** Example: Use the Width, and display position of one
** stacked view (View1) to determine where to
** position another one (View2) immediately to its
** right.
*/
PROCEDURE Anchor_To_Right( View2 VARCHAR2, View1 VARCHAR2) IS
vw_id1 ViewPort;
vw_id2 ViewPort;
x NUMBER;
y NUMBER;
w NUMBER;
BEGIN
/* Find View1 and get its (x,y) position, width */
vw_id1 := Find_View(View1);
x := Get_View_Property(vw_id1,VIEWPORT_X_POS);
y := Get_View_Property(vw_id1,VIEWPORT_Y_POS);
w := Get_View_Property(vw_id1,WIDTH);
/*
** Anchor View2 at (x+w,y+h)
*/
vw_id2 := Find_View(View2);
Set_View_Property(vw_id2,VIEWPORT_X_POS, x+w );
Set_View_Property(vw_id2,VIEWPORT_Y_POS, y );
END;

242
GET_WINDOW_PROPERTY built-in
Description
Returns the current setting for the indicated window property for the given window.
Syntax
FUNCTION GET_WINDOW_PROPERTY
(window_id Window,
property NUMBER);
FUNCTION GET_WINDOW_PROPERTY
(window_name VARCHAR2,
property NUMBER);
Returns VARCHAR2
Usage Notes
On Microsoft Windows, you can reference the MDI application window with the constant
FORMS_MDI_WINDOW.
Parameters
window_id Specifies the unique ID that Form Builder assigns the window at the time it
creates it. Use the FIND_WINDOW built-in to return the ID to an
appropriately typed variable. The data type of the ID is Window.
window_name Specifies the name that you gave the window when creating it.
property You must make a separate call to GET_WINDOW_PROPERTY for each
property you need, as shown in the FIND_WINDOW example. Specify
one of the following constants to get the current value or state of the
property:
Foreground Color.

243
in the item.
HEIGHT Returns the height of the window.
HIDE_ON_EXIT Returns the VARCHAR2 value TRUE if the window
has the Remove On Exit property set to Yes, otherwise, it is FALSE.
window item when it is minimized.
TITLE Returns the title of the window.
VISIBLE Returns the VARCHAR2 value TRUE if the window is visible,
FALSE if it is not. A window is reported visible if it is currently mapped to
the screen, even if it is entirely hidden behind another window or iconified
(minimized).
WIDTH Returns the width of the window.
constant that is used to refer to objects. Returns the number 0 if the
platform is not Microsoft Windows.
WIDOW_SIZE Returns the width and height of the window as a string,
separated by commas.
WINDOW_STATE Returns the current display state of the window. The
display state of a window is the VARCHAR2 string NORMAL,
MAXIMIZE, or MINIMIZE.
X_POS Returns the x coordinate that reflects the window’s current display
position on the screen.
Y_POS Returns the y coordinate that reflects the window’s current display
position on the screen.

244
GO_BLOCK built-in
Description
GO_BLOCK navigates to an indicated block. If the target block is non-enterable, an error occurs.
Syntax
PROCEDURE GO_BLOCK
(block_name VARCHAR2);
Enter Query Mode no
Parameters
block_name Specifies the name you gave the block when defining it. The data type of
GO_BLOCK examples
/*
** Built-in: GO_BLOCK
** Example: Navigate to a block by name. Make sure to check
** that the Go_Block succeeds by checking
FORM_SUCCESS.
*/
BEGIN
IF :Global.Flag_Indicator = ’NIGHT’ THEN
Go_Block(’Night_Schedule’);
/*
** One method of checking for block navigation success.
*/
IF NOT FORM_SUCCESS THEN
END IF;
ELSIF :Global.Flag_Indicator = ’DAY’ THEN
Go_Block(’Day_Schedule’);
/*
** Another way of checking that block navigation
** succeeds. If the block the cursor is in hasn’t
** changed after a block navigation, something went
** wrong. This method is more reliable than simply
** checking FORM_SUCCESS.
*/
IF :System.trigger_Block = :System.Cursor_Block THEN
END IF;
END IF;
Execute_Query;
Go_Block(’Main’);
END;

245
GO_FORM built-in
Description
In a multiple-form application, navigates from the current form to the indicated target form. When
navigating with GO_FORM, no validation occurs and no triggers fire except WHEN-WINDOW-
DEACTIVATED, which fires for the form that initiates navigation, and WHEN-WINDOW-
ACTIVATED, which fires for the target window in the target form.
Attempting to navigate to a form that has not yet been opened raises an error.
Syntax
PROCEDURE GO_FORM
(form_id FORMMODULE);
PROCEDURE GO_FORM
Enter Query Mode no
Parameters
form_id The unique ID that is assigned to the form dynamically when it is
instantiated at runtime. Use the FIND_FORM built-in to return the ID to
an appropriately typed variable. The data type of the ID is
FORMMODULE.
form_name The name of the target form. The data type of name is VARCHAR2. The
GO_FORM built-in attempts to search for the form module name, not the
name of the .fmx file.
GO_FORM restrictions
The target form cannot be a form that is currently disabled as a result of having invoked another form
with CALL_FORM.

246
GO_ITEM built-in
Description
GO_ITEM navigates to an indicated item. GO_ITEM succeeds even if the target item has the Keyboard
Navigable property set to No.
Syntax
PROCEDURE GO_ITEM
(item_id Item);
PROCEDURE GO_ITEM
Parameters
The data type of the ID is Item.
item_name Specifies the string you defined as the name of the item at design time. The
GO_ITEM restrictions
GO_ITEM(’emp.ename’);
• In Enter Query mode, GO_ITEM cannot be used to navigate to an item in a different block.
• You cannot use GO_ITEM to navigate to a non-navigable item, such as a VARCHAR2 item or
display item.
GO_ITEM examples
/*
** Built-in: GO_ITEM
** Example: Invoke a dialog window by navigating to
** an item which is on the canvas which the window
** displays.
*/
PROCEDURE Open_Preference_Dialog IS
BEGIN
Go_Item(’pref_dialog.printer_name’);
END;

247
GO_RECORD built-in
Description
Navigates to the record with the specified record number.
Syntax
PROCEDURE GO_RECORD
(record_number NUMBER);
Enter Query Mode no
Parameters
record_number Specifies any integer value that PL/SQL can
evaluate to a number. This includes values derived from calls
to system variables, such as TO_NUMBER(:SYSTEM.TRIGGER_RECORD) +
8.
You can use the system variables SYSTEM.CURSOR_RECORD or SYSTEM.TRIGGER_RECORD to
determine a record’s sequence number.
GO_RECORD restrictions
• If the query is open and the specified record number is greater than the number of records already
fetched, Form Builder fetches additional records to satisfy the call to this built-in.
GO_RECORD examples
/*
** Built-in: GO_RECORD
** Example: Navigate to a record in the current block
** by record number. Also see FIRST_RECORD and
** LAST_RECORD built-ins.
*/
BEGIN
Go_Record( :control.last_record_number );
END;

248
HELP built-in
Description
Displays the current item’s hint message on the message line. If the hint message is already displayed,
HELP displays the detailed help screen for the item.
Syntax
PROCEDURE HELP;
Parameters
none
HELP examples
/*
** Built-in: HELP
** Example: Gives item-level hint/help.
*/
BEGIN
Help;
END;

249
HIDE_MENU built-in
Description
On character mode platforms, makes the current menu disappear if it is currently displayed, uncovering
any part of the form display that the menu had covered. The menu will redisplay if the SHOW_MENU
built-in is invoked or the operator presses [Menu].
Syntax
PROCEDURE HIDE_MENU;
Parameters
none
HIDE_MENU examples
/*
** Built-in: HIDE_MENU
** Example: Hides the menu from view on character-mode or
** block-mode devices
*/
BEGIN
Hide_Menu;
END;

250
HIDE_VIEW built-in
Description
Hides the indicated canvas.
Syntax
PROCEDURE HIDE_VIEW
(view_id ViewPort);
PROCEDURE HIDE_VIEW
(view_name VARCHAR2);
Description
Hides the indicated canvas.
Parameters
view_id Specifies the unique ID that Form Builder assigns the view at the time it
creates it. Use the FIND_VIEW built-in to return the ID to an
view_name Specifies the name that you gave the view when creating it.
HIDE_VIEW examples
/*
** Built-in: HIDE_VIEW
** Example: Programmatically dismiss a stacked view from the
** operator’s sight.
*/
PROCEDURE Hide_Button_Bar IS
BEGIN
Hide_View(’Button_Bar’);
END;

251
HIDE_WINDOW built-in
Description
Hides the given window. HIDE_WINDOW is equivalent to setting VISIBLE to No by calling
SET_WINDOW_PROPERTY.
Syntax
PROCEDURE HIDE_WINDOW
(window_id Window);
PROCEDURE HIDE_WINDOW
Parameters
window_id Specifies the unique ID that Form Builder assigns the window at the time it
creates it. Use the FIND_WINDOW built-in to return the ID to an
HIDE_WINDOW examples
/*
** Built-in: HIDE_WINDOW
** Example: When a main window is closed, hide other
** "subordinate" windows automatically. To
** establish this window hierarchy we might define
** a static record group in the form called
** ’WINDOW_HIERARCHY’ with a structure of:
**
** Parent_Window Child_Window
** ------------- -------------
** MAIN DETAIL1
** MAIN DETAIL2
** DETAIL1 DETAIL3
** DETAIL1 DETAIL4
** DETAIL2 DETAIL5
** DETAIL3 DETAIL6
**
** We also have to make sure we navigate to some
** item not on any of the canvases shown in the
** windows we are closing, or else that window
** will automatically be re-displayed by forms
** since it has input focus.
*/
PROCEDURE Close_Window( wn_name VARCHAR2,
dest_item VARCHAR2 ) IS
rg_id RecordGroup;
gc_parent GroupColumn;
gc_child GroupColumn;
/*

252
** Local function called recursively to close children at
** all levels of the hierarchy.
*/
PROCEDURE Close_Win_With_Children( parent_win VARCHAR2 ) IS
the_child VARCHAR2(40);
the_parent VARCHAR2(40);
BEGIN
the_parent := Get_Group_Char_Cell(gc_parent,j);
/* If we find a matching parent in the table */
IF UPPER(the_parent) = UPPER(parent_win) THEN
the_child := Get_Group_Char_Cell(gc_child,j);
/*
** Close this child and any of its children
*/
Close_Win_With_Children( the_child );
END IF;
END LOOP;
/*
** Close the Parent
*/
Hide_Window( parent_win );
END;
BEGIN
/*
** Setup
*/
rg_id := Find_Group(’WINDOW_HIERARCHY’);
gc_parent := Find_Column(’WINDOW_HIERARCHY.PARENT_WINDOW’);
gc_child := Find_Column(’WINDOW_HIERARCHY.CHILD_WINDOW’);
the_Rowcount := Get_Group_Row_Count(rg_id);
/* Close all the child windows of ’wn_name’ */
Close_Win_With_Children( wn_name );
/* Navigate to the Destination Item supplied by the caller */
Go_Item( dest_item );
END;

253
HOST built-in
Description
Executes an indicated operating system command.
Syntax
PROCEDURE HOST
(system_command_string VARCHAR2);
PROCEDURE HOST
(system_command_string VARCHAR2,
screen_action NUMBER);
Parameters
system_command_ string Specifies the system command you want to pass to your particular operating
system.
screen_actioSpecifies one of the following constants:
no parameter Specifies that Form Builder will:
clear the screen
prompt the operator to return from the command
NO_PROMPT Specifies that Form Builder will:
clear the screen (does not prompt the operator to return from the
command)
NO_SCREEN Specifies that Form Builder will:
not clear the screen
not prompt the operator to return from the system command
(The HOST command should not send output to the screen when using the
NO_SCREEN parameter.)
Usage notes
• Thescreen_action parameter is only relevant to applications running in character mode, where the
output of the Host command is displayed in the same window as the form. In GUI applications, the
output of the Host command is displayed in a separate window.
• Note that the command interpreter for Microsoft Windows NT is
cmd, while on Windows 95 it is command. Before using the HOST
built-in to run an external command, be sure to check for the
operating system and pass the appropriate command string.
• On Microsoft Windows NT, when using HOST to execute a 16-bit application, the
FORM_SUCCESS built-in will return TRUE whether the application succeeds or fails. This is a
Microsoft Win32 issue. 32-bit applications and OS commands will correctly return TRUE if
executed sucessfully and FALSE if failed. Invalid commands will return FALSE.

254
• On Windows 95 platforms the FORM_SUCCESS built-in will always return TRUE for HOST
commands which fail. This includes calls to command.com or OS functions, any 16-bit DOS or
GUI application, or an invalid command. 32-bit applications will correctly return TRUE if executed
sucessfully and FALSE if failed.
HOST examples
/*
** built-in: HOST
** Example: Execute an operating system command in a
** subprocess or subshell. Uses the
** ’Get_Connect_Info’ procedure from the
** GET_APPLICATION_PROPERTY example.
*/
PROCEDURE Mail_Warning( send_to VARCHAR2) IS
the_username VARCHAR2(40);
the_password VARCHAR2(40);
the_connect VARCHAR2(40);
the_command VARCHAR2(2000);
BEGIN
/*
** Get Username, Password, Connect information
*/
Get_Connect_Info(the_username,the_password,the_connect);
/*
** Concatenate together the static text and values of
** local variables to prepare the operating system command
** string.
*/
the_command := ’orasend ’||
’ to=’||send_to||
’ std_warn.txt ’||
’ subject="## LATE PAYMENT ##"’||
’ user=’||the_username||
’ password=’||the_password||
’ connect=’||the_connect;
Message(’Sending Message...’, NO_ACKNOWLEDGE);
Synchronize;
/*
** Execute the command string as an O/S command The
** NO_SCREEN option tells forms not to clear the screen
** while we do our work at the O/S level "silently".
*/
Host( the_command, NO_SCREEN );
/*
** Check whether the command succeeded or not
*/
Message(’Error -- Message not sent.’);
ELSE
Message(’Message Sent.’);
END IF;
END;

255
ID_NULL built-in
Description
Returns a BOOLEAN value that indicates whether the object ID is available.
Syntax
FUNCTION ID_NULL
(Alert BOOLEAN);
FUNCTION ID_NULL
(Block BOOLEAN);
FUNCTION ID_NULL
(Canvas BOOLEAN);
FUNCTION ID_NULL
(Editor BOOLEAN);
FUNCTION ID_NULL
(FormModule BOOLEAN);
FUNCTION ID_NULL
(GroupColumn BOOLEAN);
FUNCTION ID_NULL
(Item BOOLEAN);
FUNCTION ID_NULL
(LOV BOOLEAN);
FUNCTION ID_NULL
(MenuItem BOOLEAN);
FUNCTION ID_NULL
(ParamList BOOLEAN);
FUNCTION ID_NULL
(RecordGroup BOOLEAN);
FUNCTION ID_NULL
(Relation BOOLEAN);
FUNCTION ID_NULL
(Timer BOOLEAN);
FUNCTION ID_NULL
(Viewport BOOLEAN);
FUNCTION ID_NULL
(Window BOOLEAN);
Returns BOOLEAN
Parameters
object_id You can call this function to test results of the following object ID types:
• Alert
• Block
• Canvas
• Editor
• FormModule
• GroupColumn

256
• Item
• LOV
• MenuItem
• ParamList
• RecordGroup
• Relation
• Timer
• Viewport
• Window
Usage Notes
Use ID_NULL when you want to check for the existence of an object created dynamically at runtime.
For example, if a specific record group already exists, you will receive an error message if you try to
create that record group. To perform this check, follow this general process:
• Use the appropriate FIND_ built-in to obtain the object ID.
• Use ID_NULL to check whether an object with that ID already exists.
• If the object does not exist, proceed to create it.
If you are going to test for an object’s existence at various times (that is, more than once during a run),
then you need to reissue the appropriate FIND_ every time -- once preceding each use of ID_NULL.
ID_NULL examples
See CREATE_GROUP

257
IMAGE_SCROLL built-in
Description
Scrolls the image item as close to the specified offset (the X,Y coordinates) as possible. This is useful if
the image is bigger than the image item.
Syntax
PROCEDURE IMAGE_SCROLL
X NUMBER,
Y NUMBER
);
PROCEDURE IMAGE_SCROLL
(item_id ITEM,
X NUMBER,
Y NUMBER
);
Parameters
item_id Specifies the unique ID Form Builder assigns when it creates the image
item.
item_name Specifies the name you gave the image when defining it.
X The X coordinate of the offset.
Y The Y coordinate of the offset.
IMAGE_SCROLL examples
For example, suppose the image is twice the size of the image item, that is, the image coordinates are 0,
200, and the item coordinates are 0, 100. To roughly center the image, you can set IMAGE_SCROLL X,
Y coordinates to 50, 50. This sets the top left corner of the item at 50 50 instead of 0, 0, which offsets the
image so that it is displayed from its coordinates of 50 to 150.

258
IMAGE_ZOOM built-in
Description
Zooms the image in or out using the effect specified in zoom_type and the amount specified in
zoom_factor.
Syntax
PROCEDURE IMAGE_ZOOM
(image_id ITEM,
zoom_type NUMBER);
(image_name VARCHAR2,
zoom_type NUMBER);
(image_id ITEM,
zoom_type NUMBER,
zoom_factor NUMBER);
(image_name VARCHAR2,
zoom_type NUMBER,
zoom_factor NUMBER);
Parameters
image_id Specifies the unique ID Form Builder assigns when it creates the image
item. The data type of the ID is ITEM.
image_name Specifies the name you gave the image when defining it.
zoom_type Specify one of the following constants to describe the effect you want to
have on the image displayed:
ADJUST_TO_FIT Scales the image to fit within the display rectangle:
the entire image is visible and the image fills as much of the image item as
possible without distorting the image.
SELECTION_RECTANGLE Scales the image so the selected region
fully fills the image item.
ZOOM_IN_FACTOR Enlarges the image by the zoom_factor.
ZOOM_OUT_FACTOR Reduces the image by the zoom_factor.
ZOOM_PERCENT Scales the image to the percentage indicated in
zoom_factor.
zoom_factor Specifies either the factor or the percentage to which you want the image
zoomed. Supply a whole number for this argument.
Usage Notes
• Check zoom_factor for reasonableness. For example, specifying a ZOOM_IN_FACTOR of 100

259
would increase the size of your image 100 times, and could cause your application to run out of
memory.
• When specifying ZOOM_IN_FACTOR or ZOOM_OUT_FACTOR, you can use any positive
integer value for zoom_factor, but performance is optimal if you use 2, 4, or 8.
• When specifying ZOOM_PERCENT, you can use any positive integer value for zoom_factor. To
enlarge the image, specify a percentage greater than 100.
• The operator must use the mouse to select a region before specifying SELECTION_RECTANGLE,
or Form Builder will return an error message.
• Your design should include scroll bars on images that use SELECTION_RECTANGLE.
• Valid for both color and black-and-white images.
IMAGE_ZOOM examples
The following example shows a When-Button-Pressed trigger that doubles the size of the image every
time the button is pressed.
Image_Zoom(’my_image’, zoom_in_factor, 2);

260
INIT_OLEARGS built-in
Description
Establishes how many arguments are going to be defined and passed to the OLE object’s method,
Syntax
PROCEDURE INIT_OLEARGS (num_args NUMBER);
Parameters
num_args Number of arguments that are to be passed to the
method -- plus one.
Usage Notes
• This built-in should be called before establishing the arguments’ types and values with
ADD_OLEARG.
• This built-in and ADD_OLEARG would also be used to prepare for GET_OLE_* calls if the
property is accessed (for example, with an index).
• It is not necessary to use INIT_OLEARGS before a GET_OLE_* call if that call does not take OLE
parameters.
• Note that the number specified in num_args should be one more than the number of actual
arguments. (Thus, if four arguments are to be passed, set num_arg to be five ). This increase is
required only in preparation for GET_OLE_* calls, not for CALL_OLE, but does no harm in the
latter case.

261
INITIALIZE_CONTAINER built-in
Description
Inserts an OLE object from a server-compatible file into an OLE container.
Syntax
PROCEDURE INITIALIZE_CONTAINER
(item_id Item,
file_name VARCHAR2);
PROCEDURE INITIALIZE_CONTAINER
file_name VARCHAR2);
Enter Query Mode no
Parameters
file_name Specifies the name of the file containing the object for insertion into an
OLE container. Include the path of the file location.
INITIALIZE_CONTAINER restrictions
INITIALIZE_CONTAINER examples
/* Built-in: INITIALIZE_CONTAINER
** Example: Initializes an OLE container by inserting an object
** from a specified file into an OLE container.
*/
DECLARE
item_id ITEM;
BEGIN
ELSE
Initialize_Container(item_id,’c:OLEoleobj.xls’);
END IF;
END;

262
INSERT_RECORD built-in
Description
When called from an On-Insert trigger, inserts the current record into the database during Post and
Commit Transactions processing. This built-in is included primarily for applications that will run against
a non-ORACLE datasource.
Syntax
PROCEDURE INSERT_RECORD;
Enter Query Mode no
Parameters
none
INSERT_RECORD restrictions
Valid only in an On-Insert trigger.
INSERT_RECORD examples
/*
** Built-in: INSERT_RECORD
** Example : Perform Form Builder standard insert processing
** based on a global flag setup at startup by the
** form, perhaps based on a parameter.
** trigger: On-Insert
*/
BEGIN
/*
*/
User_Exit(’my_insrec block=EMP’);
/*
*/
ELSE
Insert_Record;
END IF;
END;

263
ISSUE_ROLLBACK built-in
Description
When called from an On-Rollback trigger, initiates the default Form Builder processing for rolling back
to the indicated savepoint. This built-in is included primarily for applications that will run against a non-
ORACLE data source.
Syntax
PROCEDURE ISSUE_ROLLBACK
(savepoint_name VARCHAR2);
Enter Query Mode no
Parameters
savepoint name Name of the savepoint to which you want to rollback. A null
savepoint_name causes a full rollback.
ISSUE_ROLLBACK restrictions
Results are unpredictable when ISSUE_ROLLBACK is used outside an On-Rollback trigger or when
used with a savepoint other than that provided by a call to
GET_APPLICATION_PROPERTY(SAVEPOINT_NAME).
ISSUE_ROLLBACK examples
/*
** Built-in: ISSUE_ROLLBACK
** Example: Perform Form Builder standard Rollback processing.
** Decide whether to use this built-in based on a
** global flag setup at startup by the form.
** perhaps based on a parameter.
** trigger: On-Rollback
*/
DECLARE
sp_name VARCHAR2(80);
BEGIN
/*
** Get name of the savepoint to which Form Builder needs to
** rollback. (NULL = Full Rollback)
*/
sp_name := Get_Application_Property(SAVEPOINT_NAME);
/*
*/
User_Exit(’my_rollbk name=’||sp_name);
ELSE
Issue_Rollback(sp_name);
END IF;
END;

264
ISSUE_SAVEPOINT built-in
Description
When called from an On-Savepoint trigger, ISSUE_SAVEPOINT initiates the default processing for
issuing a savepoint. You can use GET_APPLICATION_PROPERTY (SAVEPOINT_NAME) to
determine the name of the savepoint that Form Builder would be issuing by default, if no On-Savepoint
trigger were present.
This built-in is included primarily for applications that will run against a non-ORACLE datasource.
Syntax
PROCEDURE ISSUE_SAVEPOINT
(savepoint_name VARCHAR2);
Enter Query Mode no
Parameters
savepoint _name Name of the savepoint you want to be issued
ISSUE_SAVEPOINT restrictions
Never issue a savepoint with the name FM_<number>, unless the savepoint name was provided by a call
to GET_APPLICATION_PROPERTY. Doing so may cause a conflict with savepoints issued by Form
Builder.
ISSUE_SAVEPOINT examples
/*
** Built-in: ISSUE_SAVEPOINT
** Example: Perform Form Builder standard savepoint
processing.
** Decide whether to use this built-in based on a
** global flag setup at startup by the form,
** trigger: On-Savepoint
*/
DECLARE
sp_name VARCHAR2(80);
BEGIN
/* Get the name of the savepoint Form Builder needs to issue
*/
sp_name := Get_Application_Property(SAVEPOINT_NAME);
/* Check the global flag we setup at form startup
*/
User_Exit(’my_savept name=’||sp_name);
/* Otherwise, do the right thing.
*/
ELSE
Issue_Savepoint(sp_name);
END IF;

266
ITEM_ENABLED built-in
Description
Returns the Boolean value TRUE when the menu item is enabled. Returns the Boolean value FALSE
when the menu item is disabled.
Note: ITEM_ENABLED is equivalent to GET_MENU_ITEM_PROPERTY (MENU_ITEM,
ENABLED).
Syntax
FUNCTION ITEM_ENABLED
(mnunam VARCHAR2,
itmnam VARCHAR2);
Returns BOOLEAN
Parameters
mnunam Specifies the VARCHAR2 name of the menu.
itmnam Specifies the VARCHAR2 name of the menu item.

267
LAST_OLE_ERROR built-in
Description
Returns the identifying number of the most recent OLE error condition
Syntax
FUNCTION LAST_OLE_ERROR RETURN number;
Returns number
Parameters None
Usage Notes
• This function can be used for most error conditions. However, if the error was a PL/SQL exception,
use the LAST_OLE_EXCEPTION function instead.
• For more information about error values and their meanings, refer to winerror.h. Winerror.h is
supplied by your C compiler vendor.

268
LAST_OLE_EXCEPTION built-in
Description
Returns the identifying number of the most recent OLE exception that occurred in the called object.
Syntax
FUNCTION LAST_OLE_EXCEPTION
(source OUT VARCHAR2, description OUT VARCHAR2,
helpfile OUT VARCHAR2,
helpcontextid OUT PLS_INTEGER)
RETURN errornumber PLS_INTEGER;
Returns error number that the OLE server assigned to this exception condition
Parameters
source Name of the OLE server that raised the
exception condition.
description Error message text.
helpfile Name of the file in which the OLE server has
additional error information.
helpcontextid ID of a specific document in the above help
file.
Usage Notes
This function can be used after a PL/SQL FORM_OLE_FAILURE exception has occurred as a result of
calling an OLE object server. For information about other types of errors (not PL/SQL exceptions), use
the LAST_OLE_ERROR function.

269
LAST_RECORD built-in
Description
Navigates to the last record in the block’s list of records. If a query is open in the block, Form Builder
fetches the remaining selected records into the block’s list of records, and closes the query.
Syntax
PROCEDURE LAST_RECORD;
Enter Query Mode no
Parameters
none
LAST_RECORD examples
See FIRST_RECORD

270
LIST_VALUES built-in
Description
LIST_VALUES displays the list of values for the current item, as long as the input focus is in a text item
that has an attached LOV. The list of values remains displayed until the operator dismisses the LOV or
selects a value.
By default, LIST_VALUES uses the NO_RESTRICT parameter. This parameter causes Form Builder
not to use the automatic search and complete feature. If you use the RESTRICT parameter, Form
Builder uses the automatic search and complete feature.
Automatic Search and Complete Feature With the automatic search and complete feature, an LOV
evaluates a text item’s current value as a search value. That is, if an operator presses [List] in a text item
that has an LOV, Form Builder checks to see if the item contains a value.
If the text item contains a value, Form Builder automatically uses that value as if the operator had entered
the value into the LOV’s search field and pressed [List] to narrow the list.
If the item value would narrow the list to only one value, Form Builder does not display the LOV, but
automatically reads the correct value into the field.
Syntax
PROCEDURE LIST_VALUES
(kwd NUMBER);
Enter Query Mode no
Parameters
kwd Specifies one of the following constants:
NO_RESTRICT Specifies that Form Builder will not use the automatic
search and complete feature.
RESTRICT Specifies that Form Builder will use the automatic search and
complete feature.

271
LOCK_RECORD built-in
Description
Attempts to lock the row in the database that corresponds to the current record. LOCK_RECORD locks
the record immediately, regardless of whether the Locking Mode block property is set to Immediate (the
default) or Delayed.
When executed from within an On-Lock trigger, LOCK_RECORD initiates default database locking.
The following example illustrates this technique.
Syntax
PROCEDURE LOCK_RECORD;
Enter Query Mode no
Parameters
none
LOCK_RECORD examples
/*
** Built-in: LOCK_RECORD
** Example: Perform Form Builder standard record locking on
the
** queried record which has just been deleted or
** updated. Decide whether to use default
** processing or a user exit by consulting a
** trigger: On-Lock
*/
BEGIN
/*
** Check the global flag we set up at form startup
*/
IF :Global.Non_Oracle_Datasource = ’TRUE’ THEN
User_Exit(’my_lockrec block=EMP’);
/*
*/
ELSE
Lock_Record;
END IF;
END;

272
LOGON built-in
Description
Performs the default Form Builder logon processing with an indicated username and password. Call this
procedure from an On-Logon trigger when you want to augment default logon processing.
Syntax
PROCEDURE LOGON
(username VARCHAR2,
password VARCHAR2);
PROCEDURE LOGON
(username VARCHAR2,
password VARCHAR2,
logon_screen_on_error VARCHAR2);
Parameters
This built-in takes the following arguments:
username Any valid username of up to 80 characters.
password Any valid password of up to 80 characters, including a database connect
string.
logon_screen_ on_error An optional BOOLEAN parameter that, when set to TRUE (default), causes
Form Builder to automatically display the logon screen if the logon
specified fails (usually because of a incorrect username/password). When
logon_screen_on_error is set to FALSE and the logon fails, the logon
screen will not display and FORM_FAILURE is set to TRUE so the
designer can handle the condition in an appropriate manner.
Usage Notes:
When using LOGON to connect to an OPS$ database use a slash ’/’ for the user.name and the
database name for the password..
LOGON restrictions
• If you identify a remote database, a SQL*Net connection to that database must exist at runtime.
• Form Builder can connect to only one database at a time. However, database links may be used to
access multiple databases with a single connection.
LOGON examples
/*
** Built-in: LOGON
** Example: Perform Form Builder standard logon to the ORACLE
** database. Decide whether to use Form Builder

273
** built-in processing or a user exit by consulting a
** perhaps based on a parameter. This example
** uses the ’Get_Connect_Info’ procedure from the
** GET_APPLICATION_PROPERTY example.
** trigger: On-Logon
*/
DECLARE
un VARCHAR2(80);
pw VARCHAR2(80);
cn VARCHAR2(80);
BEGIN
/*
** Get the connection info
*/
Get_Connect_Info(un,pw,cn);
/*
** If at startup we set the flag to tell our form that we
** are not running against ORACLE, then call our
** appropriate MY_LOGON userexit to logon.
*/
User_Exit(’my_logon username=’||un||’ password=’||pw);
/*
** Otherwise, call the LOGON built-in
*/
ELSE
/*
** Use the following to place a slash in the username field
for OPS$ logon
*/
IF un IS NULL THEN
un:=’/’;
END IF
IF cn IS NOT NULL THEN
LOGON(un,pw||’@’||cn);
ELSE
LOGON(un,pw);
END IF;
END IF;
END;

274
LOGON_SCREEN built-in
Description
Displays the default Form Builder logon screen and requests a valid username and password. Most
commonly, you will include this built-in subprogram in an On-Logon trigger to connect to a non-
ORACLE data source.
Syntax
PROCEDURE LOGON_SCREEN;
Parameters
none
LOGON_SCREEN restrictions
• You must issue a call to the LOGON built-in to create the connection to your data source.
LOGON_SCREEN examples
/*
** Built-in: LOGON_SCREEN
** Example: Use the default Form Builder logon screen to
prompt
** for username and password before logging on to
** the database. This uses the ’Get_Connect_Info’
** procedure from the GET_APPLICATION_PROPERTY
** example.
*/
DECLARE
un VARCHAR2(80);
pw VARCHAR2(80);
cn VARCHAR2(80);
BEGIN
/*
** Bring up the logon screen
*/
Logon_Screen;
/*
** Get the username, password and
** connect string.
*/
Get_Connect_Info( un, pw, cn );
/*
** Log the user onto the database
*/
IF cn IS NOT NULL THEN
LOGON(un,pw||’@’||cn);
ELSE
LOGON(un,pw);
END IF;

276
LOGOUT built-in
Description
Disconnects the application from the ORACLE RDBMS. All open cursors are automatically closed
when you issue a call to the LOGOUT built-in. You can programmatically log back on with LOGON. If
you LOGOUT of a multiple-form application with multiple connections, Form Builder tries to re-
establish all of those connections when you subsequently execute LOGON.
Syntax
PROCEDURE LOGOUT;
Parameters
none
LOGOUT examples
/*
** Built-in: LOGOUT
** Example: Perform Form Builder standard logout. Decide
** whether to use Form Builder built-in processing or
a
** user exit by consulting a global flag setup at
** parameter.
** trigger: On-Logout
*/
BEGIN
/*
** Check the flag we setup at form startup
*/
User_Exit(’my_logout’);
/*
*/
ELSE
Logout;
END IF;

277
MENU_CLEAR_FIELD built-in
Description
MENU_CLEAR_FIELD clears the current field’s value from the current cursor position to the end of the
field. If the current cursor position is to the right of the last nonblank character,
MENU_CLEAR_FIELD clears the entire field, making its value NULL.
Syntax
PROCEDURE MENU_CLEAR_FIELD;
Parameters
none
MENU_CLEAR_FIELD restrictions
The Enter Parameter Values dialog must be displayed.

278
MENU_NEXT_FIELD built-in
Description
MENU_NEXT_FIELD navigates to the next field in an Enter Parameter Values dialog.
Syntax
PROCEDURE MENU_NEXT_FIELD;
Parameters
none
MENU_NEXT_FIELD restrictions
You must be in an Enter Parameter Values dialog.

279
MENU_PARAMETER built-in
Description
MENU_PARAMETER displays all the parameters associated with the current menu, and their current
values, in the Enter Parameter Values dialog box.
Syntax
PROCEDURE MENU_PARAMETER;
Parameters
none
MENU_PARAMETER restrictions
Valid only for menus running in full-screen display style.

280
MENU_PREVIOUS_FIELD built-in
Description
MENU_PREVIOUS_FIELD returns to the previous field in an Enter Parameter Values dialog.
Syntax
PROCEDURE MENU_PREVIOUS_FIELD;
Parameters
none
MENU_PREVIOUS_FIELD restrictions
You must be in an Enter Parameter Values dialog box.

281
MENU_REDISPLAY built-in
Description
This procedure redraws the screen in a menu.
Syntax
PROCEDURE MENU_REDISPLAY;
Parameters
none
MENU_REDISPLAY restrictions
You must be on a character mode or block mode platform.

282
MENU_SHOW_KEYS built-in
Description
MENU_SHOW_KEYS displays the Keys screen for the menu module at runtime.
Syntax
PROCEDURE MENU_SHOW_KEYS;
Parameters
none
MENU_SHOW_KEYS restrictions
MENU_SHOW_KEYS is available in any context.

283
MESSAGE built-in
Description
Displays specified text on the message line.
Syntax
PROCEDURE MESSAGE
(message_string VARCHAR2,
user_response NUMBER);
Parameters
message_string Specify a character string enclosed in single quotes or a variable of
VARCHAR2 data type.
user_response Specifies one of the following constants:
ACKNOWLEDGE Specifies that Form Builder is to display a modal alert
that the operator must dismiss explicitly, whenever two consecutive
messages are issued. ACKNOWLEDGE forces the first message to be
acknowledged before the second message can be displayed. This is the
default.
NO_ACKNOWLEDGE Specifies that, when two consecutive messages
are issued, the operator is not expected to respond to the first message
displayed before Form Builder displays a second message. Using
NO_ACKNOWLEDGE creates a risk that the operator may not see the first
message, because the second message immediately overwrites it without
prompting the operator for acknowledgement.
MESSAGE restrictions
The message_string can be up to 200 characters long. Note, however, that several factors affect the
maximum number of characters that can be displayed, including the current font and the limitations of
the runtime window manager.
MESSAGE examples
/*
** Built-in: MESSAGE
** Example: Display several messages to the command line
** throughout the progress of a particular
** subprogram. By using the NO_ACKNOWLEDGE parameter,
** we can avoid the operator’s having to
** acknowledge each message explicitly.
*/
PROCEDURE Do_Large_Series_Of_Updates IS
BEGIN
Message(’Working... (0%)’, NO_ACKNOWLEDGE);

284
/*
** Long-running update statement goes here
*/
SYNCHRONIZE;
/*
** Another long-running update statement goes here
*/
/*
** Last long-running statement here
*/
Message(’Done...’, NO_ACKNOWLEDGE);
END;

285
MESSAGE_CODE built-in
Description
Returns a message number for the message that Form Builder most recently generated during the current
Runform session. MESSAGE_CODE returns zero at the beginning of a session, before Form Builder
generates any messages.
Use MESSAGE_CODE to test the outcome of a user action (e.g., pressing a key) to determine
processing within an On-Message trigger.
Refer to the Messages appendix for a list of messages and message numbers.
Syntax
FUNCTION MESSAGE_CODE;
Returns NUMBER
Parameters
none
MESSAGE_CODE examples
/*
** Built-in: MESSAGE_CODE,MESSAGE_TEXT,MESSAGE_TYPE
** Example: Reword certain FRM message messages by checking
** the Message_Code in an ON-MESSAGE trigger
** trigger: On-Message
*/
DECLARE
msgnum NUMBER := MESSAGE_CODE;
msgtxt VARCHAR2(80) := MESSAGE_TEXT;
msgtyp VARCHAR2(3) := MESSAGE_TYPE;
BEGIN
IF msgnum = 40400 THEN
Message(’Your changes have been made permanent.’);
ELSIF msgnum = 40401 THEN
Message(’You have no unsaved changes outstanding.’);
ELSE
/*
**
** FRM-12345: Message Text Goes Here
*/
Message(msgtyp||’-’||TO_CHAR(msgnum)||’: ’||msgtxt);
END IF;
END;

286
MESSAGE_TEXT built-in
Description
Returns message text for the message that Form Builder most recently generated during the current
Runform session. MESSAGE_TEXT returns NULL at the beginning of a session, before Form Builder
generates any messages.
Use MESSAGE_TEXT to test the outcome of a user action (e.g., pressing a key) to determine processing
within an On-Message trigger.
Note: If your applications must be supported in more than one language, use the MESSAGE_CODE
built-in instead of the MESSAGE_TEXT built-in. Referencing message codes rather than message text is
particularly useful in applications that provide national language support.
Syntax
FUNCTION MESSAGE_TEXT;
Returns VARCHAR2
Parameters
none
MESSAGE_TEXT examples
/*
*/
DECLARE
BEGIN
ELSE
/*
**
*/
END IF;
END;

287
MESSAGE_TYPE built-in
Description
Returns a message type for the message that Form Builder most recently generated during the current
Runform session.
Use MESSAGE_TYPE to test the outcome of a user action (e.g., pressing a key) to determine processing
within an On-Message trigger.
Syntax
FUNCTION MESSAGE_TYPE;
Returns VARCHAR2
MESSAGE_TYPE returns one of three values for the message type:
FRM Indicates that an Form Builder message was generated.
ORA Indicates that an ORACLE message was generated.
NULL Indicates that Form Builder has not yet issued any messages during the
session.
Parameters
none
MESSAGE_TYPE examples
/*
*/
DECLARE
BEGIN
ELSE
/*
**
*/
END IF;

289
MOVE_WINDOW built-in
Description
Moves the given window to the location specified by the given coordinates.
If you have specified the form property Coordinate System as Character, then your x, y coordinates are
specified in characters. If the Coordinate System is specified as Real, then your x, y coordinates are
specified in the real units you have selected--pixels, inches, centimeters, or points.
Syntax
FUNCTION MOVE_WINDOW
(window_id Window,
x NUMBER,
y NUMBER);
FUNCTION MOVE_WINDOW
x NUMBER,
y NUMBER);
Parameters
window_id Specifies the unique ID that Form Builder assigns the window when
created. Use the FIND_WINDOW built-in to return the ID to an
x Specifies the x coordinate on the screen where you want to place the upper
left corner of a window.
y Specifies the y coordinate on the screen where you want to place the upper
left corner of a window.
MOVE_WINDOW examples
/*
** Built-in: MOVE_WINDOW
** Example: Move window2 to be anchored at the bottom right
** corner of window1.
*/
PROCEDURE Anchor_Bottom_Right2( Window2 VARCHAR2, Window1
VARCHAR2) IS
wn_id1 Window;
wn_id2 Window;
x NUMBER;
y NUMBER;
w NUMBER;
h NUMBER;
BEGIN
/*
** Find Window1 and get its (x,y) position, width, and

290
** height.
*/
x := Get_Window_Property(wn_id1,X_POS);
y := Get_Window_Property(wn_id1,Y_POS);
/*
** Anchor Window2 at (x+w,y+h)
*/
Move_Window( wn_id2, x+w, y+h );
END;

291
NAME_IN built-in
Description
Returns the value of the indicated variable.
The returned value is in the form of a character string. However, you can use NAME_IN to return
numbers and dates as character strings and then convert those strings to the appropriate data types. You
can use the returned value as you would use any value within an executable statement.
If you nest the NAME_IN function, Form Builder evaluates the individual NAME_IN functions from the
innermost one to the outermost one.
Syntax
FUNCTION NAME_IN
(variable_name VARCHAR2);
Returns VARCHAR2
Parameters
variable_name Specifies a valid variable or text item. The data type of the name is
VARCHAR2.
Usage Notes
If the returned value is a date string, NAME_IN will use the format mask specified in the
BUILTIN_DATE_FORMAT property. If the DATE_FORMAT_COMPATIBILITY_MODE property
is set to 4.5 the default American format is used to format the returned string.
NAME_IN examples
/*
** Built-in: NAME_IN
** Example: Simple implementation of a Last-In-First-Out
** stack mechanism using Global variables.
** For each named stack, a global variable
** GLOBAL.<stackname>_PTR points to the largest
** element on the stack. PUSH increments this
** value as new elements are added. Values
** PUSH’ed on or POP’ed off the named stack are
** actually stored in GLOBAL variables of a
** conveniently formed name: GLOBAL.<stackname>nnn
** where ’nnn’ is the number of the element on the
** stack.
**
** Usage:
** Push(’MYSTACKNAME’, ’1’);
** Push(’MYSTACKNAME’, ’2’);
**
** str_var := Pop(’MYSTACKNAME’); -- Gets ’2’
** str_var := Pop(’MYSTACKNAME’); -- Gets ’1’
** str_var := Pop(’MYSTACKNAME’); -- Gets ’EOS’

292
**
*/
PROCEDURE Push ( the_stackname VARCHAR2,
the_value VARCHAR2 ) IS
ptr_name VARCHAR2(40); -- This stack’s pointer name
prefix VARCHAR2(40); -- Common prefix for storage vars
elt_name VARCHAR2(40); -- Name of storage element
new_idx VARCHAR2(4) ; -- New stack pointer value
BEGIN
/*
** For any named stack that we reference, the global
** variables used for storing the stack’s values and the
** stack’s pointer all begin with a common prefix:
** GLOBAL.<stackname>
*/
prefix := ’GLOBAL.’ || the_stackname;
/*
** This named stack’s pointer resides in
** GLOBAL.<stackname>_PTR Remember that this is the *name*
** of the pointer.
*/
ptr_name := prefix || ’_PTR’;
/*
** Initialize the stack pointer with a default value of
** zero if the stack pointer did not exist previously, ie
** the GLOBAL.<stackname>_PTR had yet to be created.
*/
Default_Value( ’0’, ptr_name );
/*
** Since we’re PUSH’ing a new element on the stack,
** increment the stack pointer to reflect this new
** element’s position. Remember that GLOBAL variables are
** always of type VARCHAR2, so we must convert them TO_NUMBER
** before any calculations.
*/
new_idx := TO_CHAR( TO_NUMBER( Name_In( ptr_name ) ) + 1 ) ;
Copy( new_idx , ptr_name );
/*
** Determine the name of the global variable which will
** store the value passed in, GLOBAL.<stackname><new_idx>.
** This is simply the prefix concatenated to the new index
** number we just calculated above.
*/
elt_name := prefix||new_idx;
Copy( the_value , elt_name );
END;
FUNCTION Pop ( the_stackname VARCHAR2)
RETURN VARCHAR2 IS
ptr_name VARCHAR2(40); -- This stack’s pointer name
prefix VARCHAR2(40); -- Common prefix for storage vars
elt_name VARCHAR2(40); -- Name of storage element
new_idx VARCHAR2(4) ; -- New stack pointer value
cur_idx VARCHAR2(4) ; -- Current stack pointer value
the_val VARCHAR2(255);
EMPTY_STACK CONSTANT VARCHAR2(3) := ’EOS’;
NO_SUCH_STACK CONSTANT VARCHAR2(3) := ’NSS’;
BEGIN
/*
** For any named stack that we reference, the global
** variables used for storing the stack’s values and the
** stack’s pointer all begin with a common prefix:
** GLOBAL.<stackname>

293
*/
prefix := ’GLOBAL.’ || the_stackname;
/*
** This named stack’s pointer resides in
** GLOBAL.<stackname>_PTR Remember that this is the *name*
** of the pointer.
*/
ptr_name := prefix || ’_PTR’;
/*
** Force a default value of NULL so we can test if the
** pointer exists (as a global variable). If it does not
** exist, we can test in a moment for the NULL, and avoid
** the typical error due to referencing non-existent
** global variables.
*/
Default_Value( NULL, ptr_name );
/*
** If the *value* contained in the pointer is NULL, then
** the pointer must not have existed prior to the
** Default_Value statement above. Return the constant
** NO_SUCH_STACK in this case and erase the global
** variable that the Default_Value implicitly created.
*/
IF Name_In( ptr_name ) IS NULL THEN
the_val := NO_SUCH_STACK;
Erase( ptr_name );
/*
** Otherwise, the named stack already exists. Get the
** index of the largest stack element from this stack’s
** pointer.
*/
ELSE
cur_idx := Name_In( ptr_name ) ;
/*
** If the index is zero, then the named stack is already
** empty, so return the constant EMPTY_STACK, and leave
** the stack’s pointer around for later use, ie don’t
** ERASE it.
**
** Note that a stack can only be empty if some values
** have been PUSH’ed and then all values subsequently
** POP’ed. If no values were ever PUSH’ed on this named
** stack, then no associated stack pointer would have
** been created, and we would flag that error with the
** NO_SUCH_STACK case above.
*/
IF cur_idx = ’0’ THEN
the_val := EMPTY_STACK;
/*
** If the index is non-zero, then:
** (1) Determine the name of the global variable in
** which the value to be POP’ed is stored,
** GLOBAL.<stackname><cur_idx>
** (2) Get the value of the (cur_idx)-th element to
** return
** (3) Decrement the stack pointer
** (4) Erase the global variable which was used for
** value storage
*/
ELSE
elt_name:= prefix || cur_idx;
the_val := Name_In( elt_name );
new_idx := TO_CHAR( TO_NUMBER( Name_In(ptr_name) ) - 1 ) ;
Copy( new_idx , ptr_name );
Erase( elt_name );

294
END IF;
END IF;
RETURN the_val;
END;

295
NEW_FORM built-in
Description
Exits the current form and enters the indicated form. The calling form is terminated as the parent form.
If the calling form had been called by a higher form, Form Builder keeps the higher call active and treats
it as a call to the new form. Form Builder releases memory (such as database cursors) that the terminated
form was using.
Form Builder runs the new form with the same Runform options as the parent form. If the parent form
was a called form, Form Builder runs the new form with the same options as the parent form.
Syntax
PROCEDURE NEW_FORM
PROCEDURE NEW_FORM
PROCEDURE NEW_FORM
rollback_mode NUMBER,
query_mode NUMBER);
PROCEDURE NEW_FORM
query_mode NUMBER,
data_mode NUMBER);
PROCEDURE NEW_FORM
query_mode NUMBER,
PROCEDURE NEW_FORM
query_mode NUMBER,
PROCEDURE NEW_FORM
query_mode NUMBER,
data_mode NUMBER,
PROCEDURE NEW_FORM
query_mode NUMBER,
data_mode NUMBER,
Enter Query Mode no
Parameters

296
formmodule_name Then name of the called form (must be enclosed in single quotes).
Datatype is VARCHAR2.
rollback_mode TO_SAVEPOINT (The default.) Form Builder will roll back all
uncommitted changes (including posted changes) to the current form’s
savepoint.
NO_ROLLBACK Form Builder will exit the current form without rolling
back to a savepoint. You can leave the top level form without performing a
rollback, which means that you retain any locks across a NEW_FORM
operation. These locks can also occur when invoking Form Builder from
an external 3GL program. The locks are still in effect when you regain
control from Form Builder.
(including posted changes) that were made during the current Runform
form. To avoid losing the locks issued by the calling form, Form Builder
query_mode NO_QUERY_ONLY (The default.) Runs the indicated form normally,
allowing the end user to perform inserts, updates, and deletes in the form.
QUERY_ONLY Runs the indicated form in query-only mode; end users
can query records, but cannot perform inserts, updates or deletes.
paramlist_id The unique ID Form Builder assigns when it creates the parameter list.
Specify a parameter list when you want to pass parameters from the calling
form to the new form. Datatype is PARAMLIST. A parameter list passed
to a form via NEW_FORM cannot contain parameters of type
DATA_PARAMETER (a pointer to record group).
paramlist_name The name you gave the parameter list object when you defined it. Datatype
is VARCHAR2. A parameter list passed to a form via NEW_FORM
cannot contain parameters of type DATA_PARAMETER (a pointer to
record group).
NEW_FORM examples
/* Create a generic procedure that will invoke the
** formname passed-in using the method indicated by
** the ’newform’ and ’queryonly’ parameters.
*/
PROCEDURE GENERIC_CALL(formname VARCHAR2,
newform VARCHAR2,
queryonly VARCHAR2) IS
msglvl VARCHAR2(2);
error_occurred EXCEPTION;
BEGIN

297
/*
** Remember the current message level and temporarily
** set it to 10 to suppress errors if an incorrect
** formname is called
*/
msglvl := :SYSTEM.MESSAGE_LEVEL;
:SYSTEM.MESSAGE_LEVEL := ’10’;
IF newform = ’Y’ THEN
IF queryonly = ’Y’ THEN
NEW_FORM(formname, to_savepoint, query_only);
ELSIF queryonly = ’N’ THEN
NEW_FORM(formname);
END IF;
ELSIF newform = ’N’ THEN
IF queryonly = ’Y’ THEN
CALL_FORM(formname, hide, no_replace, query_only);
ELSIF queryonly = ’N’ THEN
CALL_FORM(formname);
END IF;
END IF;
IF NOT form_success THEN
MESSAGE(’Cannot call form ’||UPPER(formname)||
’. Please contact your SysAdmin for help.’);
RAISE error_occurred;
END IF;
:SYSTEM.MESSAGE_LEVEL := msglvl;
EXCEPTION
WHEN error_occurred THEN
:SYSTEM.MESSAGE_LEVEL := msglvl;
RAISE form_trigger_failure;
END;

298
NEXT_BLOCK built-in
Description
Navigates to the first navigable item in the next enterable block in the navigation sequence. By default,
the next block in the navigation sequence is the block with the next higher sequence number, as defined
by the order of blocks in the Object Navigator. However, the Next Navigation Block block property can
be set to specify a different block as the next block for navigation purposes.
If there is no enterable block with a higher sequence, NEXT_BLOCK navigates to the enterable block
with the lowest sequence number.
Syntax
PROCEDURE NEXT_BLOCK;
Enter Query Mode no
Parameters
none
NEXT_BLOCK examples
/*
** Built-in: NEXT_BLOCK
** Example: If the current item is the last item in the
** block, then skip to the next block instead of
** the default of going back to the first item in
** the same block
** trigger: Key-Next-Item
*/
DECLARE
cur_itm VARCHAR2(80) := :System.Cursor_Item;
lst_itm VARCHAR2(80);
BEGIN
lst_itm :=
cur_blk||’.’||Get_Block_Property(cur_blk,LAST_ITEM);
IF cur_itm = lst_itm THEN
Next_Block;
ELSE
Next_Item;
END IF;
END;

299
NEXT_FORM built-in
Description
In a multiple-form application, navigates to the independent form with the next highest sequence number.
(Forms are sequenced in the order they were invoked at runtime.) If there is no form with a higher
sequence number, NEXT_FORM navigates to the form with the lowest sequence number. If there is no
such form, the current form remains current.
When navigating with NEXT_FORM, no validation occurs and no triggers fire except WHEN-
WINDOW-DEACTIVATED, which fires for the form that initiates navigation, and WHEN-WINDOW-
ACTIVATED, which fires for the target form.
Syntax
PROCEDURE NEXT_FORM;
Enter Query Mode no
NEXT_FORM restrictions
with CALL_FORM.

300
NEXT_ITEM built-in
Description
Navigates to the navigable item with the next higher sequence number than the current item. If there is
no such item, NEXT_ITEM navigates to the item with the lowest sequence number. If there is no such
item, NEXT_ITEM navigates to the current item.
If the validation unit is the item, NEXT_ITEM validates any fields with sequence numbers greater than
the current item or less than the target item.
The function of NEXT_ITEM from the last navigable item in the block depends on the setting of the
Navigation Style block property. The valid settings for Navigation Style include:
Same Record (Default): A Next Item operation from a block’s last item moves the input focus to the first
navigable item in the block, in that same record.
Change Record: A Next Item operation from a block’s last item moves the input focus to the first
navigable item in the block, in the next record. If the current record is the last record in the block and
there is no open query, Form Builder creates a new record. If there is an open query in the block (the
block contains queried records), Oracle forms retrieves additional records as needed.
Change Block: A Next Item operation from a block’s last item moves the input focus to the first
navigable item in the first record of the next block.
Syntax
PROCEDURE NEXT_ITEM;
Parameters
none
NEXT_ITEM examples
/*
** Built-in: NEXT_ITEM
** Example: See NEXT_BLOCK
*/

301
NEXT_KEY built-in
Description
Navigates to the enabled and navigable primary key item with the next higher sequence number than the
current item. If there is no such item, NEXT_KEY navigates to the enabled and navigable primary key
item with the lowest sequence number. If there is no primary key item in the current block, an error
occurs.
If the validation unit is the item, NEXT_KEY validates any fields with sequence numbers greater than
the current item or less than the target item.
Syntax
PROCEDURE NEXT_KEY;
Parameters
none
NEXT_KEY examples
/*
** Built-in: NEXT_KEY
** Example: Jump the cursor to the next primary key item in
** in the current block.
*/
BEGIN
Next_Key;
END;

302
NEXT_MENU_ITEM built-in
Description
Navigates to the next menu item in the current menu.
Syntax
PROCEDURE NEXT_MENU_ITEM;
Parameters
none
NEXT_MENU_ITEM restrictions
NEXT_MENU_ITEM is available only in a custom menu running in the full-screen menu display style.

303
NEXT_RECORD built-in
Description
Navigates to the first enabled and navigable item in the record with the next higher sequence number
than the current record. If there is no such record, Form Builder will fetch or create a record. If the
current record is a new record, NEXT_RECORD fails.
Syntax
PROCEDURE NEXT_RECORD;
Enter Query Mode no
Parameters
none
NEXT_RECORD restrictions
Not allowed in Enter Query mode.
NEXT_RECORD examples
/*
** Built-in: NEXT_RECORD
** Example: If the current item is the last item in the
** block, then skip to the next record instead of
** the default of going back to the first item in
** the same block
** trigger: Key-Next-Item
*/
DECLARE
lst_itm VARCHAR2(80);
BEGIN
lst_itm :=
cur_blk||’.’||Get_Block_Property(cur_blk,LAST_ITEM);
IF cur_itm = lst_itm THEN
Next_Record;
ELSE
Next_Item;
END IF;
END;

304
NEXT_SET built-in
Description
Fetches another set of records from the database and navigates to the first record that the fetch retrieves.
NEXT_SET succeeds only if a query is open in the current block.
Syntax
PROCEDURE NEXT_SET;
Enter Query Mode no
Parameters
none
NEXT_SET examples
/*
** Built-in: NEXT_SET
** Example: Fetch the next set of records from the database
** when a button is pressed.
*/
BEGIN
Next_Set;
END;

305
OLEVAR_EMPTY built-in
Description
An OLE variant of type VT_EMPTY.
Syntax
OLEVAR_EMPTY OLEVAR;
Usage Notes
This is a non-settable variable. It is useful for supplying empty or non-existant arguments to an OLE
call.

306
OPEN_FORM built-in
Description
Opens the indicated form. Use OPEN_FORM to create multiple-form applications, that is, applications
that open more than one form at the same time.
Syntax
PROCEDURE OPEN_FORM
PROCEDURE OPEN_FORM
(form_name VARCHAR2,
activate_mode NUMBER);
PROCEDURE OPEN_FORM
activate_mode NUMBER,
session_mode NUMBER);
PROCEDURE OPEN_FORM
session_mode NUMBER,
data_mode NUMBER);
PROCEDURE OPEN_FORM
PROCEDURE OPEN_FORM
PROCEDURE OPEN_FORM
data_mode NUMBER,
PROCEDURE OPEN_FORM
data_mode NUMBER,
Enter Query Mode no
Parameters:
form_name The name of the form to open. Datatype is VARCHAR2. Required
activate_mode ACTIVATE (The default.) Sets focus to the form to make it the active
form in the application.
NO_ACTIVATE Opens the form but does not set focus to the form. The
current form remains current.

307
session_mode NO_SESSION (The default.) Specifies that the opened form should
share the same database session as the current form. POST and COMMIT
operations in any form will cause posting, validation, and commit
processing to occur for all forms running in the same session.
SESSION Specifies that a new, separate database session should be
created for the opened form.
paramlist_name The name of a parameter list to be passed to the opened form. Datatype is
VARCHAR2.
paramlist_id The unique ID that Form Builder assigns to the parameter list at the time it
is created. Use the GET_PARAMETER_LIST function to return the ID to
a variable of type PARAMLIST.
Usage Notes
• Whether you open a form with ACTIVATE or NO_ACTIVATE specified, any startup triggers that
would normally fire will execute in the opened form. (However, see the usage note regarding
SESSION-specified below.)
• When you open a form with ACTIVATE specified (the default), the opened form receives focus
immediately; trigger statements that follow the call to OPEN_FORM never execute.
• When you open a form with NO_ACTIVATE specified, trigger statements that follow the call to
OPEN_FORM will execute after the opened form has been loaded into memory and its initial start-
up triggers have fired.
• When you open a form with SESSION specified, the PRE-LOGON, ON-LOGON, and POST-
LOGON triggers will not fire.
• If the form that issues the OPEN_FORM built-in is running in QUERY_ONLY mode, then the
opened form will also run in QUERY_ONLY mode.
• On Microsoft Windows, if any window in the form that opens the independent form is maximized,
the first window displayed by the opened form will also be maximized, regardless of its original
design-time setting. (The GUI display state of a window is controlled by the Window_State
property.)
• For most applications, you should avoid using OPEN_FORM with forms that contain root windows.
Because there can be only one root window displayed at a time, canvases that are assigned to the
root window in the current form and in the opened form will be displayed in the same window. This
causes the opened form to "take over" the root window from the original form, thus hiding the
canvases in the original form partially or completely.
OPEN_FORM restrictions
• You can set session On for all Runform invocations by setting the FORMSnn_SESSION
environment variable to TRUE. When you set the FORMSnn_SESSION variable, all Runform
invocations inherit its setting, unless you override the environment variable by setting the Session
option from the Runform command line.

308
• If you set session_mode to SESSION when you use OPEN_FORM to create a multiple-form
application, you cannot set data_mode to SHARE_LIBRARY_DATA (Form Builder will display a
runtime error message).

309
PASTE_REGION built-in
Description
Pastes the contents of the clipboard (i.e., the selected region that was cut or copied most recently),
positioning the upper left corner of the pasted area at the cursor position.
Syntax
PROCEDURE PASTE_REGION;
Parameters
none
Usage Notes
Use PASTE_REGION, as well as the other editing functions, on text and image items only. The cut and

310
PAUSE built-in
Description
Suspends processing until the end user presses a function key. PAUSE might display an alert.
Syntax
PROCEDURE PAUSE;
Description
Suspends processing until the end user presses a function key. PAUSE might display an alert.
Parameters
none

311
PLAY_SOUND built-in
Description
Plays the sound object in the specified sound item.
Syntax
PLAY_SOUND(item_id ITEM);
PLAY_SOUND(item_name VARCHAR2);
Built-in Type restricted
Enter Query Mode No
Parameters:
item_id The unique ID Form Builder gave the sound item when you created it.
item_name The name you gave the sound item when you created it.
PLAY_SOUND examples
/* Example 1: This procedure call (attached to a menu item)
** plays a sound object from the specified sound item:
*/
GO_ITEM(’about.abc_inc’);
PLAY_SOUND(’about.abc_inc’);
/* Example 2: These procedure calls (attached to a
** When-Button-Pressed trigger) read a sound object from the
** file system and play it. Note: since an item must have focus
** in order to play a sound, the trigger code includes a call
** to the built-in procedure GO_ITEM:
*/
BEGIN
IF :clerks.last_name EQ ’BARNES’ THEN
GO_ITEM(’orders.filled_by’);
READ_SOUND_FILE(’t:ordersclerkbarnes.wav’,
’wave’,
’orders.filled_by’);
PLAY_SOUND(’orders.filled_by’);
END IF;
END;

312
POPULATE_GROUP built-in
Description
Executes the query associated with the given record group and returns a number indicating success or
failure of the query. Upon a successful query, POPULATE_GROUP returns a 0 (zero). An unsuccessful
query generates an ORACLE error number that corresponds to the particular SELECT statement failure.
The rows that are retrieved as a result of a successful query replace any rows that exist in the group.
Note: Be aware that the POPULATE_GROUP array fetches 100 records at a time. To improve network
performance, you may want to restrict queries, thus limiting network traffic.
Syntax
FUNCTION POPULATE_GROUP
FUNCTION POPULATE_GROUP
Returns NUMBER
Parameters
POPULATE_GROUP restrictions
Valid only for record groups
• that were created at design time with a query
• that were created by a call to the CREATE_GROUP_FROM_QUERY built-in
• that have been previously populated with the POPULATE_GROUP_WITH_QUERY built-in
(which associates a query with the record group)
POPULATE_GROUP examples
/*
** Built-in: POPULATE_GROUP
** Example: See GET_GROUP_ROW_COUNT and
CREATE_GROUP_FROM_QUERY
*/

313
POPULATE_GROUP_FROM_TREE built-in
Description
Populates a record group with the data from the hierarchical tree.
Syntax
PROCEDURE POPULATE_GROUP_FROM_TREE
(group_name VARCHAR2,
item_name VARCHAR2,
node NODE);
(group_name VARCHAR2,
item_id ITEM,
node NODE);
(group_id RECORDGROUP,
item_name VARCHAR2,
node NODE);
(group_id RECORDGROUP,
item_id ITEM,
node NODE);
Enter Query Mode no
Parameters
group_name Specifies the name of the group.
group_id Specifies the ID assigned to the group.
node Specifies a valid node. If specified, indicates a sub-tree
used to populate the RecordGroup, including the
specified node.
Usage Notes
The record group is cleared prior to inserting the hierarchical tree’s data set.

314
POPULATE_GROUP_FROM_TREE examples
/*
** Built-in: POPULATE_GROUP_FROM_TREE
*/
-- This code will transfer all the data from a hierarchical tree
-- that is parented by the node with a label of "Zetie" to a
-- pre-created record group. Please see the documentation
-- for the structure of the required record group.
DECLARE
htree ITEM;
find_node NODE;
BEGIN
-- Find the node with a label "Zetie".
find_node := Ftree.Find_Tree_Node(htree, ’Zetie’,
Ftree.FIND_NEXT,
Ftree.NODE_LABEL, Ftree.ROOT_NODE,
Ftree.ROOT_NODE);
-- Populate the record group with the tree data.
-- The record group must already exist.
Ftree.Populate_Group_From_Tree(’tree_data_rg’, htree,
find_node);
END;

315
POPULATE_GROUP_WITH_QUERY built-in
Description
Populates a record group with the given query. The record group is cleared and rows that are fetched
replace any existing rows in the record group.
If the SELECT statement fails, Form Builder returns an ORACLE error number. If the query is
successful, this built-in returns 0 (zero).
You can use this built-in to populate record groups that were created by a call to either:
• the CREATE_GROUP built-in or
• the CREATE_GROUP_FROM_QUERY built-in
When you use this built-in, the indicated query becomes the default query for the group, and will be
executed whenever the POPULATE_GROUP built-in is subsequently called.
Note: Be aware that the POPULATE_GROUP_WITH_QUERY array fetches 20 records at a time. To
improve network performance, you may want to restrict queries, thus limiting network traffic.
Syntax
FUNCTION POPULATE_GROUP_WITH_QUERY
query VARCHAR2);
FUNCTION POPULATE_GROUP_WITH_QUERY
query VARCHAR2);
Returns NUMBER
Parameters
query A valid SELECT statement, enclosed in single quotes. Any columns
retrieved as a result of the query take the data types of the columns in the
table. If you restrict the query to a subset of the columns in the table, then
Form Builder creates only those columns in the record group. The data
type of the query is VARCHAR2.
POPULATE_GROUP_WITH_QUERY restrictions
• The columns specified in the SELECT statement must match the record group columns in number
and type.

316
POPULATE_GROUP_WITH_QUERY examples
/*
** Built-in: POPULATE_GROUP_WITH_QUERY
** Example: See CREATE_GROUP
*/

317
POPULATE_LIST built-in
Description
Removes the contents of the current list and populates the list with the values from a record group. The
record group must be created at runtime and it must have the following two column (VARCHAR2)
structure:
Column 1: Column 2:
the list label the list value
Syntax
PROCEDURE POPULATE_LIST
(list_id ITEM,
recgrp_id RecordGroup);
(list_id ITEM,
recgrp_name VARCHAR2);
Built-in Type
unrestricted procedure
Parameters
recgrp_id Specifies the unique ID that Form Builder assigns when it creates the record
group. The data type of the ID is RecordGroup.
recgrp_name The VARCHAR2 name you gave to the record group when you created it.
Usage Notes
• Do not use the POPULATE_LIST built-in if the Mapping of Other Values property is defined and
there are queried records in the block. Doing so may cause Form Builder to be unable to display
records that have already been fetched.
open). At this point, if you populate the list using POPULATE_LIST, an error will occur because

318
Form Builder will attempt to display the previously fetched values (A, B, and C), but will be unable to
because these values were removed from the list and replaced with new values.
• Before populating a list, close any open queries. Use the ABORT_QUERY built-in to close an open
query.
POPULATE_LIST restrictions
POPULATE_LIST returns error FRM-41337: Cannot populate the list
from the record group if:
• the record group does not contain either the default value element or the other values element and
the list does not meet the criteria specified for deleting these elements with
DELETE_LIST_ELEMENT. Refer to the restrictions on DELETE_LIST_ELEMENT for more
information.
• the record group contains an other value element but the list does not meet the criteria specified for
adding an other value element with ADD_LIST_ELEMENT. Refer to the restrictions on
ADD_LIST_ELEMENT for more information.
POPULATE_LIST examples
/*
** Built-in: POPULATE_LIST
** Example: Retrieves the values from the current list item
** into record group one, clears the list, and
** populates the list with values from record group
** two when a button is pressed.
*/
BEGIN
Retrieve_List(list_id, ’RECGRP_ONE’);
Clear_List(list_id);
Populate_List(list_id, ’RECGRP_TWO’);
END;

319
POPULATE_TREE built-in
Description
Clears out any data already in the hierarchical tree, and obtains the data set specified by the
RecordGroup or QueryText properties.
Syntax
PROCEDURE POPULATE_TREE
PROCEDURE POPULATE_TREE
(item_id ITEM);
Enter Query Mode no
Parameters
item_id Specifies the unique ID that Form Builder assigns to the
POPULATE_TREE examples
/*
** Built-in: POPULATE_TREE
*/
-- This code will cause a tree to be re-populated using
-- either the record group or query already specified
-- for the hierarchical tree.
DECLARE
htree ITEM;
top_node FTREE.NODE;
find_node FTREE.NODE;
BEGIN
-- Populate the tree with data.
Ftree.Populate_Tree(htree);
END;

320
POST built-in
Description
Writes data in the form to the database, but does not perform a database commit. Form Builder first
validates the form. If there are changes to post to the database, for each block in the form Form Builder
writes deletes, inserts, and updates to the database.
Any data that you post to the database is committed to the database by the next COMMIT_FORM that
executes during the current Runform session. Alternatively, this data can be rolled back by the next
CLEAR_FORM.
Syntax
PROCEDURE POST;
Enter Query Mode no
Parameters
none
Usage Notes
If this form was called via OPEN_FORM with the NO_SESSION parameter specified, then the POST
will validate and write the data both in this form and in the calling form.
POST examples
/*
** Built-in: POST and EXIT_FORM
** Example: Leave the called form, without rolling back the
** posted changes so they may be posted and
** committed by the calling form as part of the
** same transaction.
*/
BEGIN
Post;
/*
** Form_Status should be ’QUERY’ if all records were
** successfully posted.
*/
Message(’An error prevented the system from posting
changes’);
END IF;
/*
** By default, Exit_Form asks to commit and performs a
** rollback to savepoint. We’ve already posted, so we do
** not need to commit, and we don’t want the posted changes
** to be rolled back.
*/
Exit_Form(NO_COMMIT, NO_ROLLBACK);
END;

321
PREVIOUS_BLOCK built-in
Description
Navigates to the first navigable item in the previous enterable block in the navigation sequence. By
default, the previous block in the navigation sequence is the block with the next lower sequence number,
as defined by the block order in the Object Navigator. However, the Previous Navigation Block block
property can be set to specify a different block as the previous block for navigation purposes.
If there is no enterable block with a lower sequence, PREVIOUS_BLOCK navigates to the enterable
block with the highest sequence number.
Syntax
PROCEDURE PREVIOUS_BLOCK;
Enter Query Mode no
Parameters
none
PREVIOUS_BLOCK examples
/*
** Built-in: PREVIOUS_BLOCK
** Example: If the current item is the first item in the
** block, then skip back the previous block
** instead of the default of going to the last
** item in the same block
** trigger: Key-Previous-Item
*/
DECLARE
frs_itm VARCHAR2(80);
BEGIN
frs_itm :=
cur_blk||’.’||Get_Block_Property(cur_blk,FIRST_ITEM);
IF cur_itm = frs_itm THEN
Previous_Block;
ELSE
Previous_Item;
END IF;
END;

322
PREVIOUS_FORM built-in
Description
In a multiple-form application, navigates to the form with the next lowest sequence number. (Forms are
sequenced in the order they were invoked at runtime.) If there is no form with a lower sequence number,
PREVIOUS_FORM navigates to the form with the highest sequence number. If there is no such form,
the current form remains current.
When navigating with PREVIOUS_FORM, no validation occurs and no triggers fire except WHEN-
WINDOW-DEACTIVATED, which fires for the form that initiates navigation, and WHEN-WINDOW-
ACTIVATED, which fires for the target form.
Syntax
PROCEDURE PREVIOUS_FORM;
Enter Query Mode no
PREVIOUS_FORM restrictions
with CALL_FORM.

323
PREVIOUS_ITEM built-in
Description
Navigates to the navigable item with the next lower sequence number than the current item. If there is no
such item, PREVIOUS_ITEM navigates to the navigable item with the highest sequence number. If
there is no such item, PREVIOUS_ITEM navigates to the current item.
The function of PREVIOUS_ITEM from the first navigable item in the block depends on the setting of
the Navigation Style block property. The valid settings for Navigation Style include:
Same Record (Default): A Previous Item operation from a block’s first item moves the input focus to
the last navigable item in the block, in that same record.
Change Record: A Previous Item operation from a block’s first item moves the input focus to the last
navigable item in the block, in the previous record.
Change Block: A Previous Item operation from a block’s first item moves the input focus to the last
navigable item in the current record of the previous block.
Syntax
PROCEDURE PREVIOUS_ITEM;
Parameters
none
PREVIOUS_ITEM examples
/*
** Built-in: PREVIOUS_ITEM
** Example: See PREVIOUS_BLOCK
*/

324
PREVIOUS_MENU built-in
Description
PREVIOUS_MENU navigates to the previously active item in the previous menu.
Syntax
PROCEDURE PREVIOUS_MENU;
Parameters
none
PREVIOUS_MENU restrictions
PREVIOUS_MENU applies only in full-screen and bar menus.

325
PREVIOUS_MENU_ITEM built-in
Description
PREVIOUS_MENU_ITEM navigates to the previous menu item in the current menu.
Syntax
PROCEDURE PREVIOUS_MENU_ITEM;
Parameters
none
PREVIOUS_MENU_ITEM restrictions
PREVIOUS_MENU_ITEM applies only in full-screen menus.

326
PREVIOUS_RECORD built-in
Description
Navigates to the first enabled and navigable item in the record with the next lower sequence number than
the current record.
Syntax
PROCEDURE PREVIOUS_RECORD;
Enter Query Mode no
Parameters
none
PREVIOUS_RECORD examples
/*
** Built-in: PREVIOUS_RECORD
** Example: If the current item is the first item in the
** block, then skip back to the previous record
** instead of the default of going to the last
** item in the same block
** trigger: Key-Previous-Item
*/
DECLARE
frs_itm VARCHAR2(80);
BEGIN
frs_itm :=
cur_blk||’.’||Get_Block_Property(cur_blk,FIRST_ITEM);
IF cur_itm = frs_itm THEN
Previous_Record;
ELSE
Previous_Item;
END IF;
END;

327
PRINT built-in
Description
Prints the current window to a file or to the printer.
Syntax
PROCEDURE PRINT;
Parameters
none
PRINT examples
/*
** Built-in: PRINT
** Example: Print the current window.
*/
BEGIN
Print;
END;

328
PTR_TO_VAR built-in
Description
First, creates an OLE variant of type VT_PTR that contains the supplied address. Then, passes that
variant and type through the function VARPTR_TO_VAR.
Syntax
FUNCTION PTR_TO_VAR
(address PLS_INTEGER, vtype VT_TYPE)
Returns the created and transformed OLE variant.
Parameters
address A variable whose value is an address.
vtype The type to be given to the final version of the OLE
variant (after its processing by VARPTR_TO_VAR).
Usage Notes
In most applications, there is no need to use this function. If the function is used, care must be taken to
ensure that the correct address value is placed in the new variant.

329
QUERY_PARAMETER built-in
Description
Displays the Query Parameter dialog showing the current values of the specified substitution parameters.
End users can set the value of any parameter you include in the list.
The Query Parameter dialog is modal, and control does not return to the calling trigger or procedure until
the end user either accepts or cancels the dialog. This means that any PL/SQL statements that follow the
call to QUERY_PARAMETER are not executed until the Query Parameter dialog is dismissed.
Syntax
PROCEDURE QUERY_PARAMETER
(parameter_string VARCHAR2);
Parameters
parameter_string Specifies a string of substitution parameters for a menu item. The syntax
for specifying the parameter_string parameter requires the ampersand
&parm_name. Substitution parameters are referenced in PL/SQL code
with the colon syntax ":param_name" used for all bind variables).
QUERY_PARAMETER examples
/*
** Built-in: QUERY_PARAMETER
** Example: Prompt for several menu parameters
** programmatically, validating their contents.
*/
PROCEDURE Update_Warehouse IS
validation_Err BOOLEAN;
BEGIN
WHILE TRUE LOOP
Query_Parameter(’&p1 &q2 &z6’);
/*
** If the user did not Cancel the box the Menu_Success
** function will return boolean TRUE.
*/
IF Menu_Success THEN
IF TO_NUMBER( :q2 ) NOT BETWEEN 100 AND 5000 THEN
Message(’Qty must be in the range 100..5000’);
Bell;
Validation_Err := TRUE;
END IF;
/*
** Start a sub-block so we can catch a Value_Error
** exception in a local handler
*/
BEGIN
IF TO_DATE( :z6 ) < SYSDATE THEN
Message(’Target Date must name a day in the future.’);
Bell;
END IF;
EXCEPTION

330
WHEN VALUE_ERROR THEN
Message(’Target Date must be of the form DD-MON-YY’);
Bell;
END;
/*
** If we get here, all parameters were valid so do the
** Update Statement.
*/
IF NOT Validation_Err THEN
UPDATE WAREHOUSE
SET QTY_TO_ORDER = QTY_TO_ORDER*0.18
WHERE TARGET_DATE = TO_DATE(:z6)
AND QTY_ON_HAND > TO_NUMBER(:q2)
AND COST_CODE LIKE :p1||’%’;
END IF;
ELSE
/*
** If Menu_Success is boolean false, then return back
** from the procedure since user cancelled the dialog
*/
RETURN;
END IF;
END LOOP;
END;

331
READ_IMAGE_FILE built-in
Description
Reads an image of the given type from the given file and displays it in the Form Builder image item.
Syntax
PROCEDURE READ_IMAGE_FILE
(file_name VARCHAR2,
file_type VARCHAR2,
item_id ITEM);
PROCEDURE READ_IMAGE_FILE
file_type VARCHAR2,
item_name VARCHAR2);
Parameters
file_name Valid file name. The file name designation can include a full path
statement appropriate to your operating system.
file_type The valid image file type: BMP, CALS, GIF, JFIF, JPG, PICT, RAS,
TIFF, or TPIC. (Note: File type is optional, as Form Builder will attempt
to deduce it from the source image file. To optimize performance,
however, you should specify the file type.)
item_id The unique ID Form Builder assigns to the image item when it creates it.
variable. Datatype is ITEM.
item_name The name you gave the image item when you created it. Datatype is
VARCHAR2.
Usage Notes
Form Builder searches for the image file along the same default path as it searches for an .FMX file. For
more information on the specific search path for your platform, refer to the Form Builder documentation
for your operating system.
READ_IMAGE_FILE examples
/* Read an image from the filesystem into an image item on the
** form. In this example, the scanned picture identification
** for each employee is NOT saved to the database, but is
** stored on the filesystem. An employee’s photo is a TIFF
** image stored in a file named <Userid>.TIF Each employee’s
** Userid is unique.
** trigger: Post-Query
*/
DECLARE
tiff_image_dir VARCHAR2(80) := ’/usr/staff/photos/’;
photo_filename VARCHAR2(80);

332
BEGIN
/*
** Set the message level high so we can gracefully handle
** an error reading the file if it occurs
*/
:System.Message_Level := ’25’;
/*
** After fetching an employee record, take the employee’s
** Userid and concatenate the ’.TIF’ extension to derive
** the filename from which to load the TIFF image. The EMP
** record has a non-database image item named ’EMP_PHOTO’
** into which we read the image.
*/
photo_filename := tiff_image_dir||LOWER(:emp.userid)||’.tif’;
/*
** For example ’photo_filename’ might look like:
**
** /usr/staff/photos/jgetty.tif
** ------
**
** Now, read in the appropriate image.
*/
READ_IMAGE_FILE(photo_filename, ’TIFF’, ’emp.emp_photo’);
IF NOT FORM_SUCCESS THEN
MESSAGE(’This employee does not have a photo on file.’);
END IF;
:SYSTEM.MESSAGE_LEVEL := ’0’;
END;

333
READ_SOUND_FILE built-in
Description
Reads sound object from the specified file into the specified sound item.
Syntax
READ_SOUND_FILE(file_name VARCHAR2,
file_type VARCHAR2,
item_id ITEM);
READ_SOUND_FILE(file_name VARCHAR2,
file_type VARCHAR2,
item_name VARCHAR2);
Built-in Type
unrestricted
Enter Query Mode Yes
Parameters:
file_name The fully-qualified file name of the file that contains the sound object to be
read.
file_type The file type for the sound data file. Valid values are: AU, AIFF, AIFF-C,
and WAVE. (Note: file type is optional, but should be specified if known
for increased performance.)
Usage Notes
• Specifying a file type for the sound file is optional. If you know the file type, however, specifying it
can increase performance.
READ_SOUND_FILE restrictions
READ_SOUND_FILE examples
/* These procedure calls (attached to a When-Button-Pressed
** trigger) reads a sound object from the file system and plays
** it. Note: since a sound item must have focus in order to play
** a sound object, the trigger code includes a call to the
** built-in procedure GO_ITEM:
*/
BEGIN
IF :clerks.last_name EQ ’BARNES’ THEN
GO_ITEM(’orders.filled_by’);
READ_SOUND_FILE(’t:ordersclerkbarnes.wav’,
’wave’,
’orders.filled_by’);
PLAY_SOUND(’orders.filled_by’);
END IF;

335
RECALCULATE built-in
Description
Marks the value of the specified formula calculated item (in each record of the block) for recalculation.
Typically you would invoke this when the formula (or function or procedure that it invokes) refers to a
system variable or built-in function which now would return a different value.
Note that actual recalculation doesn’t happen immediately; it occurs sometime after the item is marked
but before the new value of the calculated item is referenced or displayed to the end user. Your
application’s logic should not depend on recalculation of a calculated item occurring at a specific time.
Syntax
PROCEDURE RECALCULATE
PROCEDURE RECALCULATE
(item_id Item);
Parameters
item_name The name you gave the item when you defined it. Datatype is
VARCHAR2.
item_id The unique ID Form Builder assigned to the item when it created the item.
variable. Datatype is Item.
RECALCULATE restrictions
You can use the RECALCULATE built-in to recalculate formula calculated items only; if you specify a
summary item (or a non-calculated item) as the argument to RECALCULATE, Form Builder will return
an error message:
FRM-41379: Cannot recalculate non-formula item
<block_name.item_name>.

336
REDISPLAY built-in
Description
Redraws the screen. This clears any existing system messages displayed on the screen.
Syntax
PROCEDURE REDISPLAY;
Parameters
none

337
RELEASE_OBJ built-in
Description
Shuts down the connection to the OLE object.
Syntax
PROCEDURE RELEASE_OBJ
(obj OLEOBJ, kill_persistence_boolean := NULL);
Parameters
obj Pointer to the OLE object to be released.
Kill_persistence_boolean A boolean value of NULL releases the
object, ending its persistence.
A boolean value of TRUE releases only a
persistent object. If you don’t have a pointer
to a persistent object, your code will
misbehave.
A boolean value of FALSE releases only a
non-persistent object. If you don’t have a
pointer to a non-persistent object, you will
get error FRM-40935.
This is an optional parameter. If not
supplied, the default value is NULL (release
object unconditionally).
Usage Notes
In general, you should not access an object after you release it.
The conditional form of this procedure (boolean TRUE or FALSE) should be used only in those rare
cases when two instances of an object have been created, each carrying different persistence values, and
the pointer is ambiguous. The procedure will release one of the two objects, leaving the other as the sole
instance.

338
REPLACE_CONTENT_VIEW built-in
Description
Replaces the content canvas currently displayed in the indicated window with a different content canvas.
Syntax
PROCEDURE REPLACE_CONTENT_VIEW
(window_id Window,
view_id ViewPort);
view_id ViewPort);
(window_id Window,
view_name VARCHAR2);
view_name VARCHAR2);
Parameters
window_name Specifies the name that you gave the window when creating it. The data
view_id Specifies the unique ID that Form Builder assigns the view when it creates
the object. Use the FIND_VIEW built-in to return the ID to an
view_name Specifies the name that you gave the object when defining it. The data type
REPLACE_CONTENT_VIEW restrictions
• The canvas that replaces the window’s current content canvas must have been assigned to that
window at design time. That is, you cannot replace a window’s content view with a content view
from a different window.
• If you replace a content canvas that contains the item that currently has focus, Form Builder will
immediately undo the replacement to keep the focus item visible to the end user.
REPLACE_CONTENT_VIEW examples
/*
** Built-in: REPLACE_CONTENT_VIEW
** Example: Replace the ’salary’ view with the ’history’
** view in the ’employee_status’ window.

339
*/
BEGIN
Replace_Content_View(’employee_status’,’history’);
END;

340
REPLACE_MENU built-in
Description
Replaces the current menu with the specified menu, but does not make the new menu active.
REPLACE_MENU also allows you to change the way the menu displays and the role.
Because REPLACE_MENU does not make the new menu active, Form Builder does not allow the menu
to obscure any part of the active canvas. Therefore, all or part of the menu does not appear on the screen
if the active canvas would cover it.
Syntax
REPLACE_MENU;
PROCEDURE REPLACE_MENU
(menu_module_name VARCHAR2);
(menu_module_name VARCHAR2,
menu_type NUMBER);
menu_type NUMBER,
starting_menu_name VARCHAR2);
menu_type NUMBER,
starting_menu VARCHAR2,
group_name VARCHAR2);
menu_type NUMBER,
starting_menu VARCHAR2,
group_name VARCHAR2,
use_file BOOLEAN);
Usage Notes
REPLACE_MENU replaces the menu for all windows in the application. If you are using
CALL_FORM, REPLACE_MENU will replace the menu for both the calling form and the called form
with the specified menu.
Parameters
menu_module _name Name of the menu module that should replace the current menu module.
Datatype is VARCHAR2. This parameter is optional; if it is omitted, Form
Builder runs the form without a menu.
menu_type The display style of the menu. The following constants can be passed as
arguments for this parameter:
PULL_DOWN Specifies that you want Form Builder to display the menus
in a pull-down style that is characteristic of most GUI platforms and some
character mode platforms.

341
BAR Specifies that you want Form Builder to display the menu in a bar
style horizontally across the top of the root window.
FULL_SCREEN Specifies that you want Form Builder to display the
menu in a full-screen style.
starting_menu Specifies the menu within the menu module that Form Builder should use
as the starting menu. The data type of the name is VARCHAR2.
group_name Specifies the security role that Form Builder is to use. If you do not specify
a role name, Form Builder uses the current username to determine the role.
use_file Indicates how Form Builder should locate the menu .MMX file to be run.
Corresponds to the Menu Source form module property. The data type of
use_file is BOOLEAN.
NULL Specifies that Form Builder should read the current form’s Menu
Source property and execute REPLACE_MENU accordingly. For
example, if the form module Menu Source property is set to Yes for the
current form, Form Builder executes REPLACE_MENU as if the use_file
actual parameter was TRUE.
FALSE Specifies that Form Builder should treat the menu_module value
as a reference to a .MMB (binary) menu module in the database, and should
query this module to get the actual name of the .MMX (executable).
TRUE Specifies that Form Builder should treat the menu_module value as
a direct reference to a .MMX menu runfile in the file system.
REPLACE_MENU examples
/*
** Built-in: REPLACE_MENU
** Example: Use a standard procedure to change which root
** menu in the current menu application appears in
** the menu bar. A single menu application may
** have multiple "root-menus" which an application
** can dynamically set at runtime.
*/
PROCEDURE Change_Root_To(root_menu_name VARCHAR2) IS
BEGIN
Replace_Menu(’MYAPPLSTD’, PULL_DOWN, root_menu_name);
END;

342
REPORT_OBJECT_STATUS built-in
Description
Provides status of a report object run within a form by the RUN_REPORT_OBJECT built-in.
Syntax
FUNCTION REPORT_OBJECT_STATUS
(report_id VARCHAR2(20)
);
Parameters
Usage Notes
• There are eight possible return values for this built-in: finished, running, canceled, opening_report,
enqueued, invalid_job, terminated_with_error, and crashed.
•
REPORT_OBJECT_STATUS examples
DECLARE
BEGIN
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = ’FINISHED’ then
message(’Report Completed’);
copy_report_object_output(v_rep,’d:templocal.pdf’);
host(’netscape d:templocal.pdf’);
else
message(’Error when running report.’);
end if;
END;

343
RESET_GROUP_SELECTION built-in
Description
Deselects any selected rows in the given group. Use this built-in to deselect all record group rows that
have been programmatically marked as selected by executing SET_GROUP_SELECTION on individual
rows.
Syntax
PROCEDURE RESET_GROUP_SELECTION
PROCEDURE RESET_GROUP_SELECTION
Parameters
RESET_GROUP_SELECTION examples
/*
** Built-in: RESET_GROUP_SELECTION
** Example: If the user presses the (Cancel) button, forget
** all of the records in the ’USERSEL’ record
** group that we may have previously marked as
** selected records.
*/
BEGIN
Reset_Group_Selection( ’usersel’ );
END;

344
RESIZE_WINDOW built-in
Description
Changes the size of the given window to the given width and height. A call to RESIZE_WINDOW sets
the width and height of the window, even if the window is not currently displayed. RESIZE_WINDOW
does not change the position of the window, as specified by the x and y coordinates of the window’s
upper left corner on the screen.
On Microsoft Windows, you can resize the MDI application window by specifying the constant
FORMS_MDI_WINDOW as the window name.
You can also resize a window with SET_WINDOW_PROPERTY.
Syntax
PROCEDURE RESIZE_WINDOW
(window_id Window,
width NUMBER,
height NUMBER);
PROCEDURE RESIZE_WINDOW
width NUMBER,
height NUMBER);
Parameters
width Specifies the new width of the window, in form coordinate units.
height Specifies the new height of the window, in form coordinate units.
RESIZE_WINDOW examples
/*
** Built-in: RESIZE_WINDOW
** Example: Set Window2 to be the same size as Window1
*/
PROCEDURE Make_Same_Size_Win( Window1 VARCHAR2, Window2
VARCHAR2) IS
wn_id1 Window;
w NUMBER;
h NUMBER;
BEGIN
/*
** Find Window1 and get it’s width and height.
*/

345
/*
** Resize Window2 to the same size
*/
Resize_Window( Window2, w, h );
END;

346
RETRIEVE_LIST built-in
Description
Retrieves and stores the contents of the current list into the specified record group. The target record
group must have the following two-column (VARCHAR2) structure:
Column 1: Column 2:
the list label the list value
Storing the contents of a list item allows you to restore the list with its former contents.
Syntax
PROCEDURE RETRIEVE_LIST
(list_id ITEM,
(list_id ITEM,
Returns VARCHAR2
Parameters
recgrp_id Specifies the unique ID that Form Builder assigns when it creates the record
group. The data type of the ID is RecordGroup.
recgrp_name The VARCHAR2 name you gave to the record group when you created it.
RETRIEVE_LIST examples
/*
** Built-in: RETRIEVE_LIST
** Example: See POPULATE_LIST
*/

347
RUN_PRODUCT built-in
Description
Invokes one of the supported Oracle tools products and specifies the name of the module or module to be
run. If the called product is unavailable at the time of the call, Form Builder returns a message to the end
user.
If you create a parameter list and then reference it in the call to RUN_PRODUCT, the form can pass text
and data parameters to the called product that represent values for command line parameters, bind or
lexical references, and named queries. Parameters of type DATA_PARAMETER are pointers to record
groups in Form Builder. You can pass DATA_PARAMETERs to Report Builder and Graphics Builder,
but not to Form Builder.
To run a report from within a form, you can alternatively use the dedicated report integration built-in
RUN_REPORT_OBJECT .
Syntax
PROCEDURE RUN_PRODUCT
(product NUMBER,
module VARCHAR2,
commmode NUMBER,
execmode NUMBER,
location NUMBER,
paramlist_id VARCHAR2,
display VARCHAR2);
PROCEDURE RUN_PRODUCT
(product NUMBER,
module VARCHAR2,
commmode NUMBER,
execmode NUMBER,
location NUMBER,
paramlist_name VARCHAR2,
display VARCHAR2);
Parameters
product Specifies a numeric constant for the Oracle product you want to invoke:
FORMS specifies a Runform session. GRAPHICS specifies Graphics
Builder. REPORTS specifies Report Builder. BOOK specifies Oracle
Book.
module Specifies the VARCHAR2 name of the module or module to be executed
by the called product. Valid values are the name of a form module, report,
Graphics Builder display, or Oracle Book module. The application looks
for the module or module in the default paths defined for the called
product.
commmode Specifies the communication mode to be used when running the called
product. Valid numeric constants for this parameter are SYNCHRONOUS
and ASYNCHRONOUS.

348
SYNCHRONOUS specifies that control returns to Form Builder only after
the called product has been exited. The end user cannot work in the form
while the called product is running.
ASYNCHRONOUS specifies that control returns to the calling application
immediately, even if the called application has not completed its display.
execmode Specifies the execution mode to be used when running the called product.
Valid numeric constants for this parameter are BATCH and RUNTIME.
When you run Report Builder and Graphics Builder, execmode can be
either BATCH or RUNTIME. When you run Form Builder, always set
execmode to RUNTIME.
locatioSpecifies the location of the module or module you want the called product to execute, either the
file system or the database. Valid constants for this property are
FILESYSTEM and DB.
Paramlist_name or paramlist_ID Specifies the parameter list to be passed to the called product. Valid
values for this parameter are the VARCHAR2 name of the parameter list,
the ID of the parameter list, or a null string (’’). To specify a parameter list
ID, use a variable of type PARAMLIST.
You can pass text parameters to called products in both SYNCHRONOUS
and ASYNCHRONOUS mode. However, parameter lists that contain
parameters of type DATA_PARAMETER (pointers to record groups) can
only be passed to Report Builder and Graphics Builder in
SYNCHRONOUS mode. (SYNCHRONOUS mode is required when
invoking Graphics Builder to return an Graphics Builder display that will
be displayed in a form chart item.)
Note: You can prevent Graphics Builder from logging on by passing a
parameter list that includes a parameter with key set to LOGON and value
set to NO.
Note: You cannot pass a DATA_PARAMETER to a child query in Report
Builder. Data passing is supported only for master queries.
display Specifies the VARCHAR2 name of the Form Builder chart item that will
contain the display (such as a pie chart, bar chart, or graph) generated by
Graphics Builder. The name of the chart item must be specified in the
format block_name.item_name. (This parameter is only required when you
are using an Graphics Builder chart item in a form.)
RUN_PRODUCT examples
/*
** Built-in: RUN_PRODUCT
** Example: Call a Report Builder report, passing the
** data in record group ’EMP_RECS’ to substitute
** for the report’s query named ’EMP_QUERY’.
** Presumes the Emp_Recs record group already
** exists and has the same column/data type
** structure as the report’s Emp_Query query.
*/
PROCEDURE Run_Emp_Report IS
pl_id ParamList;
BEGIN
/*
** Check to see if the ’tmpdata’ parameter list exists.

349
*/
pl_id := Get_Parameter_List(’tmpdata’);
/*
** If it does, then delete it before we create it again in
** case it contains parameters that are not useful for our
** purposes here.
*/
Destroy_Parameter_List( pl_id );
END IF;
/*
** Create the ’tmpdata’ parameter list afresh.
*/
pl_id := Create_Parameter_List(’tmpdata’);
/*
** Add a data parameter to this parameter list that will
** establish the relationship between the named query
** ’EMP_QUERY’ in the report, and the record group named
** ’EMP_RECS’ in the form.
*/
Add_Parameter(pl_id,’EMP_QUERY’,DATA_PARAMETER,’EMP_RECS’);
/*
**Pass a Parameter into PARAMFORM so that a parameter dialog
will not appear
**for the parameters being passing in.
*/
Add_Parameter(pl_id, ’PARAMFORM’, TEXT_PARAMETER, ’NO’);
/*
** Run the report synchronously, passing the parameter list
*/
Run_Product(REPORTS, ’empreport’, SYNCHRONOUS, RUNTIME,
FILESYSTEM, pl_id, NULL);
END;

350
RUN_REPORT_OBJECT built-in
Description
Use this built-in to run a report from within a form. You can run the report against either a local or
remote database server. Executing this built-in is similar using the RUN_PRODUCT built-in on a report.
Syntax
FUNCTION RUN_REPORT_OBJECT
(report_id REPORT_OBJECT
);
Returns VARCHAR2
Parameters
report_id Specifies the unique ID of the report to be run. You can get the report ID
for a particular report using the built-in FIND_REPORT_OBJECT.
Usage Notes
• Returns a VARCHAR2 value that uniquely identifies the report that is running either locally or on a
remote report server. You can use this report ID string as a parameter to
REPORT_OBJECT_STATUS , COPY_REPORT_OBJECT , and CANCEL_REPORT_OBJECT.
If you invoke Run_Report_Object with a blank Report Server property, the return value will be
NULL. In that case, you cannot then use the built-ins Report_Object_Status and
Copy_Report_Object_Output, because they require an actual ID value.
RUN_REPORT_OBJECT examples
DECLARE
BEGIN
......
END;

351
SCROLL_DOWN built-in
Description
Scrolls the current block’s list of records so that previously hidden records with higher sequence numbers
are displayed. If there are available records and a query is open in the block, Form Builder fetches
records during SCROLL_DOWN processing. In a single-line block, SCROLL_DOWN displays the next
record in the block’s list of records. SCROLL_DOWN puts the input focus in the instance of the current
item in the displayed record with the lowest sequence number.
Syntax
PROCEDURE SCROLL_DOWN;
Enter Query Mode no
Parameters
none
SCROLL_DOWN examples
/*
** Built-in: SCROLL_DOWN
** Example: Scroll records down some.
*/
BEGIN
Scroll_Down;
END;

352
SCROLL_UP built-in
Description
Scrolls the current block’s list of records so that previously hidden records with lower sequence numbers
are displayed. This action displays records that were "above" the block’s display.
SCROLL_UP puts the input focus in the instance of the current item in the displayed record that has the
highest sequence number.
Syntax
PROCEDURE SCROLL_UP;
Enter Query Mode no
Parameters
none
SCROLL_UP examples
/*
** Built-in: SCROLL_UP
** Example: Scroll records up some.
*/
BEGIN
Scroll_Up;
END;

353
SCROLL_VIEW built-in
Description
Moves the view to a different position on its canvas by changing the Viewport X Position on Canvas and
Viewport Y Position on Canvas properties. Moving the view makes a different area of the canvas visible
to the operator, but does not change the position of the view within the window.
Note: For a content or toolbar canvas, the window in which the canvas is displayed represents the view
for that canvas. For a stacked canvas, the view size is controlled by setting the Viewport Width and
Viewport Height properties.
Syntax
PROCEDURE SCROLL_VIEW
(view_id ViewPort,
x NUMBER,
y NUMBER);
PROCEDURE SCROLL_VIEW
x NUMBER,
y NUMBER);
Parameters
view_name Specifies the name that you gave the object when defining it. The data type
x Specifies the x coordinate of the view’s upper left corner relative to the
upper left corner of the canvas.
y Specifies the y coordinate of the view’s upper left corner relative to the
upper left corner of the canvas.
SCROLL_VIEW examples
/*
** Built-in: SCROLL_VIEW
** Example: Scroll the view whose name is passed in 10% to
** the right or left depending on the ’direction’
** parameter.
*/
PROCEDURE Scroll_Ten_Percent( viewname VARCHAR2,
direction VARCHAR2 ) IS
vw_id ViewPort;
vw_wid NUMBER;
vw_x NUMBER;
cn_id Canvas;
cn_wid NUMBER;

354
ten_percent NUMBER;
new_x NUMBER;
old_y NUMBER;
BEGIN
/*
** Get the id’s for the View and its corresponding canvas
*/
vw_id := Find_View( viewname );
cn_id := Find_Canvas( viewname );
/*
** Determine the view width and corresponding canvas
** width.
*/
vw_wid := Get_View_Property(vw_id,WIDTH);
cn_wid := Get_Canvas_Property(cn_id,WIDTH);
/*
** Calculate how many units of canvas width are outside of
** view, and determine 10% of that.
*/
ten_percent := 0.10 * (cn_wid - vw_wid);
/*
** Determine at what horizontal position the view
** currently is on the corresponding canvas
*/
vw_x:= Get_View_Property(vw_id,VIEWPORT_X_POS_ON_CANVAS);
/*
** Calculate the new x position of the view on its canvas
** to effect the 10% scroll in the proper direction.
** Closer than ten percent of the distance to the edge
** towards which we are moving, then position the view
** against that edge.
*/
IF direction=’LEFT’ THEN
IF vw_x > ten_percent THEN
new_x := vw_x - ten_percent;
ELSE
new_x := 0;
END IF;
ELSIF direction=’RIGHT’ THEN
IF vw_x < cn_wid - vw_wid - ten_percent THEN
new_x := vw_x + ten_percent;
ELSE
new_x := cn_wid - vw_wid;
END IF;
END IF;
/*
** Scroll the view that much horizontally
*/
old_y := Get_View_Property(vw_id,VIEWPORT_Y_POS_ON_CANVAS);
Scroll_View( vw_id, new_x , old_y );
END;

355
SELECT_ALL built-in
Description
Selects the text in the current item. Call this procedure prior to issuing a call to CUT_REGION or
COPY_REGION, when you want to cut or copy the entire contents of a text item.
Syntax
PROCEDURE SELECT_ALL;
Parameters
none

356
SELECT_RECORDS built-in
Description
When called from an On-Select trigger, initiates default Form Builder SELECT processing. This built-in
is included primarily for applications that run against a non-ORACLE data source, and use transactional
triggers to replace default Form Builder transaction processing.
Syntax
PROCEDURE SELECT_RECORDS;
Enter Query Mode no
Parameters
none
SELECT_RECORDS restrictions
Valid only within an On-Select trigger.
SELECT_RECORDS examples
/*
** Built-in: SELECT_RECORDS
** Example: Perform Form Builder standard SELECT processing
** based on a global flag setup at startup by the
** form, perhaps based on a parameter.
** trigger: On-Select
*/
BEGIN
/*
** Check the flag variable we setup at form startup
*/
User_Exit(’my_select block=EMP’);
/*
*/
ELSE
Select_Records;
END IF;
END;

357
SERVER_ACTIVE built-in
Description
Indicates whether or not the server associated with a given container is running: Returns TRUE if the
OLE server is running, FALSE if the OLE server is not running. You must define an appropriately typed
variable to accept the return value.
Syntax
FUNCTION SERVER_ACTIVE
(item_id Item);
FUNCTION SERVER_ACTIVE
Returns BOOLEAN
Enter Query Mode no
Parameters
SERVER_ACTIVE restrictions
SERVER_ACTIVE examples
/*
** Built-in: SERVER_ACTIVE
** Example: Checks to see if the OLE server is active.
*/
DECLARE
item_id ITEM;
active_serv BOOLEAN;
BEGIN
ELSE
active_serv := Forms_OLE.Server_Active(item_id);
IF active_serv = FALSE THEN
Forms_OLE.Activate_Server(item_id);
END IF;
END IF;
END;

358
SET_ALERT_BUTTON_PROPERTY built-in
Description
Changes the label on one of the buttons in an alert.
Syntax
PROCEDURE SET_ALERT_BUTTON_PROPERTY
(alert_id ALERT,
button NUMBER,
property VARCHAR2,
value VARCHAR2);
PROCEDURE SET_ALERT_BUTTON_PROPERTY
(alert_name VARCHAR2,
button NUMBER,
property VARCHAR2,
value VARCHAR2);
Parameters
alert_id Specifies the unique ID (data type ALERT) that Form Builder assigns to the
alert when it is created. Use FIND_ALERT to return the ID to an
appropriately typed variable.
alert_name Specifies the VARCHAR2 name of the alert.
buttoA constant that specifies the alert button you want to change, either
ALERT_BUTTON1, ALERT_BUTTON2, or ALERT_BUTTON3.
property LABEL Specifies the label text for the alert button.
value Specifies the VARCHAR2 value to be applied to the property you
specified.
Usage Notes
If the label specified is NULL, the button’s label reverts to the label specified at design time.

359
SET_ALERT_PROPERTY built-in
Description
Changes the message text for an existing alert.
Syntax
SET_ALERT_PROPERTY
(alert_id ALERT,
property NUMBER,
message VARCHAR2);
SET_ALERT_PROPERTY
(alert_name VARCHAR2,
property NUMBER,
message VARCHAR2);
Parameters
alert_id Specifies the unique ID (data type ALERT) that Form Builder assigns to the
alert when it is created. Return the ID to an appropriately typed variable.
alert_name Specifies the VARCHAR2 name of the alert.
property Specifies the specific alert property you are setting:
ALERT_MESSAGE_TEXT Specifies that you are setting the text of the
alert message.
TITLE Specifies the title of the alert. Overrides the value specified in
Form Builder unless the property value is NULL.
message Specifies the message that is to replace the current alert message. Pass the
message as a string enclosed in single quotes, as a variable, or in a
string/variable construction.
SET_ALERT_PROPERTY restrictions
If the message text exceeds 200 characters, it will be truncated.
SET_ALERT_PROPERTY examples
/*
** Built-in: SET_ALERT_PROPERTY
** Example: Places the error message into a user-defined alert
** named ’My_Error_Alert’ and displays the alert.
*/
DECLARE
err_txt VARCHAR2(80) := Error_Text;
al_id Alert;
al_button Number;

360
BEGIN
al_id := Find_Alert(’My_Error_Alert’);
Set_Alert_Property(al_id, alert_message_text, err_txt );
al_button := Show_Alert( al_id );
END;

361
SET_APPLICATION_PROPERTY built-in
Description
Sets (or resets) the application property for the current application.
Syntax
SET_APPLICATION_PROPERTY
(property NUMBER,
value VARCHAR2)
Parameters
property Specifies the property you want to set for the given application. The
possible properties are as follows:
BUILTIN_DATE_FORMAT Specifies the Builtin date format mask.
CURSOR_STYLE Specifies the cursor style for the given application.
DATE_FORMAT_COMPATIBILITY_MODE Specifies how certain date
format conversion operations will be performed.
FLAG_USER_VALUE_TOO_LONG Specifies how Form Builder should
handle user-entered values that exceed an item’s Maximum Length
property. Valid values are PROPERTY_TRUE and PROPERTY_FALSE.
PLSQL_DATE_FORMAT Specifies the PLSQL date format mask.
value The new value to be set for this property.

362
SET_BLOCK_PROPERTY built-in
Description
Sets the given block characteristic of the given block.
Syntax
SET_BLOCK_PROPERTY
(block_id Block,
property VARCHAR,
value VARCHAR);
SET_BLOCK_PROPERTY
(block_id Block,
property VARCHAR,
x NUMBER);
SET_BLOCK_PROPERTY
(block_id Block,
property VARCHAR,
x NUMBER
y NUMBER);
SET_BLOCK_PROPERTY
property VARCHAR,
value VARCHAR);
SET_BLOCK_PROPERTY
property VARCHAR,
x NUMBER);
SET_BLOCK_PROPERTY
property VARCHAR,
x NUMBER,
y NUMBER);
Parameters
block_id The unique ID Form Builder assigned to the block when you created it.
Datatype is BLOCK.
block_name The name you gave the block when you created it. Datatype is
VARCHAR2.
property Specify one of the following constants:
ALL_RECORDS Specifies whether all the records matching the query
criteria should be fetched into the data block when a query is executed.
BLOCKSCROLLBAR_POSITION Specifies both the x and y positions
of the block’s scroll bar in the form coordinate units indicated by the
Coordinate System form property.

363
BLOCKSCROLLBAR_X_POS Specifies the x position of the block’s
scroll bar in the form coordinate units indicated by the Coordinate System
form property.
BLOCKSCROLLBAR_Y_POS Specifies the y position of the block
scroll bar in the form coordinate units indicated by the Coordinate System
form property.
COORDINATION_STATUS Specifies a status that indicates whether a
block that is a detail block in a master-detail relation is currently
coordinated with all of its master blocks; that is, whether the detail records
in the block correspond correctly to the current master record in the master
block. Valid values are COORDINATED and NON_COORDINATED
CURRENT_RECORD_ATTRIBUTE Specify the VARCHAR2 name of
a named visual attribute to be associated with the given block. If the named
visual attribute does not exist, you will get an error message.
background region.
dependent.
background.
DEFAULT_WHERE Specifies a default WHERE clause for the block,
overriding previous WHERE clauses. (Note: this will not override a value
established at design time via the Property Palette for the data block’s
WHERE clause property.)
Enclose in single quotes. The WHERE reserved word is optional. The
default WHERE clause can include references to global variables, form
parameters, and item values, specified with standard bind variable syntax.
DELETE_ALLOWED Specifies whether the operator or the application
is allowed to delete records in the given block. Valid values are
PROPERTY_TRUE or PROPERTY_FALSE.

364
DML_DATA_TARGET_NAME Specifies the name of the block’s DML
data source.
ENFORCE_PRIMARY_KEY Specifies that any record inserted or
updated in the block must have a unique characteristic in order to be
committed to the database. Valid values are PROPERTY_TRUE or
PROPERTY_FALSE.
INSERT_ALLOWED Specifies whether the operator or the application is
allowed to insert records in the given block. Valid values are
KEY_MODE Specifies the key mode for the block. This is particularly
useful when running Form Builder against non-ORACLE data sources.
Valid values are UPDATEABLE_PRIMARY_KEY and
NONUPDATEABLE_PRIMARY_KEY.
LOCKING_MODE Specifies the block’s LOCKING_MODE property.
Valid values are DELAYED or IMMEDIATE.
MAX_QUERY_TIME Specifies the maximum query time. The operator
can abort a query when the elapsed time of the query exceeds the value of
this property.
MAX_RECORDS_FETCHED Specifies the maximum number of
records that can be fetched. This property is only useful when the Query
All Records property is set to Yes.
NAVIGATION_STYLE Specifies the block’s NAVIGATION_STYLE
property. Valid values are SAME_RECORD, CHANGE_RECORD, or
CHANGE_BLOCK.
NEXT_NAVIGATION_BLOCK Specifies the name of the block’s next
navigation block. By default, the next navigation block is the block with
the next higher sequence number; however, the
OPTIMIZER_HINT Specifies a hint that Form Builder passes on to the
RDBMS optimizer when constructing queries. This allows the form
designer to achieve the highest possible performance when querying blocks.
ORDER_BY Specifies a default ORDER BY clause for the block,
overriding any prior ORDER BY clause. Enclose in single quotes but do
not include the actual words ’ORDER BY’. Form Builder automatically
prefixes the statement you supply with "ORDER BY."
PRECOMPUTE_SUMMARIES[Under Construction]
PREVIOUS_NAVIGATION_BLOCK Specifies the name of the block’s
previous navigation block. By default, the previous navigation block is the
block with the next lower sequence number; however, the
QUERY_ALLOWED Specifies whether a query can be issued from the
block, either by an operator or programmatically. Valid values are

365
QUERY_DATA_SOURCE_NAME Specifies the name of the block’s
query data source. Note: You cannot set a blocks’
QUERY_DATA_SOURCE_NAME when the block’s datasource is a
procedure.
QUERY_HITS Specifies the NUMBER value that indicates the number of
records identified by the COUNT_QUERY operation.
UPDATE_ALLOWED Specifies whether the operator or the application
is allowed to update records in the given block. Valid values are
UPDATE_CHANGED_COLUMNS Specifies that only those columns
updated by an operator will be sent to the database. When Update Changed
Columns Only is set to No, all columns are sent, regardless of whether they
have been updated. This can result in considerable network traffic,
particularly if the block contains a LONG data type.
value The following constants can be passed as arguments to the property values
described earlier:
COORDINATED Specifies that the COORDINATION_STATUS
property should be set to COORDINATED for a block that is a detail block
in a master-detail relation.
DELAYED Specifies that you want Form Builder to lock detail records
only at the execution of a commit action.
IMMEDIATE Specifies that you want Form Builder to lock detail records
immediately whenever a database record has been modified.
NON_COORDINATED Specifies that the COORDINATION_STATUS
property should be set to NON_COORDINATED for a block that is a
detail block in a master-detail relation.
NON_UPDATEABLE_PRIMARY_KEY Specifies that you want Form
Builder to process records in the block on the basis that the underlying data
source does not allow primary keys to be updated.
PROPERTY_TRUE Specifies that the property is to be set to the TRUE
state. Specifically, supply as the value for DELETE_ALLOWED,
INSERT_ALLOWED, QUERY_HITS, and UPDATE_ALLOWED.
PROPERTY_FALSE Specifies that the property is to be set to the
FALSE state.
UNIQUE_KEY Specifies that you want Form Builder to process records
in the block on the basis that the underlying data source uses some form of
unique key, or ROWID.
UPDATEABLE_PRIMARY_KEY Specifies that you want Form Builder
to process records in the block on the basis that the underlying data source
allows for primary keys to be updated.
x The NUMBER value of the axis coordinate specified in form coordinate
system units. If setting both x and y positions this value refers to the x
coordinate. When setting the y position only, this value refers to the y
coordinate.

366
y The NUMBER value of the y axis coordinate specified in form coordinate
system units. This value applies when setting both x and y positions, and
can be ignored for all other properties.
SET_BLOCK_PROPERTY examples
/*
** Built-in: SET_BLOCK_PROPERTY
** Example: Prevent future inserts, updates, and deletes to
** queried records in the block whose name is
** passed as an argument to this procedure.
*/
PROCEDURE Make_Block_Query_Only( blk_name IN VARCHAR2 )
IS
blk_id Block;
BEGIN
/* Lookup the block’s internal ID */
blk_id := Find_Block(blk_name);
/*
** If the block exists (ie the ID is Not NULL) then set
** the three properties for this block. Otherwise signal
** an error.
*/
IF NOT Id_Null(blk_id) THEN
Set_Block_Property(blk_id,INSERT_ALLOWED,PROPERTY_FALSE);
Set_Block_Property(blk_id,UPDATE_ALLOWED,PROPERTY_FALSE);
Set_Block_Property(blk_id,DELETE_ALLOWED,PROPERTY_FALSE);
ELSE
Message(’Block ’||blk_name||’ does not exist.’);
END IF;
END;
Using BLOCKSCROLLBAR_POSITION:
/*
** Built-in: SET_BLOCK_PROPERTY
** Example: Set the x and y position of the block’s scrollbar
** to the passed x and y coordinates
*/
PROCEDURE Set_Scrollbar_Pos( blk_name IN VARCHAR2, xpos IN
NUMBER, ypos IN NUMBER )
IS
BEGIN
Set_Block_Property(blk_name, BLOCKSCROLLBAR_POSITION, xpos, ypos);
END;

367
SET_CANVAS_PROPERTY built-in
Description
Sets the given canvas property for the given canvas.
Syntax
SET_CANVAS_PROPERTY
(canvas_id CANVAS,
property NUMBER,
value VARCHAR2);
SET_CANVAS_PROPERTY
(canvas_id CANVAS,
property NUMBER,
x NUMBER);
SET_CANVAS_PROPERTY
(canvas_id CANVAS,
property NUMBER,
x NUMBER,
y NUMBER);
SET_CANVAS_PROPERTY
property NUMBER,
value VARCHAR2);
SET_CANVAS_PROPERTY
property NUMBER,
x NUMBER);
SET_CANVAS_PROPERTY
property NUMBER,
x NUMBER,
y NUMBER);
Parameters
canvas_id The unique ID Form Builder assigned to the canvas object when you
created it. Use the FIND_CANVAS built-in to return the ID to a variable
of datatype CANVAS.
canvas_name The name you gave the canvas object when you defined it. Datatype is
VARCHAR2.
property The property you want to set for the given canvas. Possible properties are:
CANVAS_SIZE The dimensions of the canvas (width, height).
Foreground Color.

368
in the item.
HEIGHT The height of the canvas in characters.
TOPMOST_TAB_PAGE The name of the tab page that will appear to
operators as the top-most (i.e., overlaying all other tab pages in the tab
canvas).
VISUAL_ATTRIBUTE Either a valid named visual attribute that exists in
the current form, or the name of a logical attribute definition in a runtime
resource file that you want Form Builder to apply to the canvas.
WIDTH The width of the canvas in characters.
value The VARCHAR2 value to be applied to the property you specified.
x The NUMBER value of the x coordinate or the width, depending on the
property you specified. Specify the argument in form coordinate system
units.
y The NUMBER value of the y coordinate or the height, depending on the
units.
SET_CANVAS_PROPERTY restrictions
• You cannot enter a non-existent named visual attribute.
• If Form Builder cannot find a named visual attribute by the name you supply, it looks for the display
attribute in your Oracle*Terminal resource file.
SET_CANVAS_PROPERTY examples
/* Change the "background color" by dynamically setting the
** canvas color at runtime to the name of a visual attribute
** you created:
*/
BEGIN
SET_CANVAS_PROPERTY(’my_cvs’, visual_attribute, ’blue_txt’);
END;

369
SET_CUSTOM_ITEM_PROPERTY built-in
Note:
This built-in has been replaced by the SET_CUSTOM_PROPERTY built-in You should use that built-
in in any new form. The following information is provided only for maintenance purposes.
Description
Sets the value of a property of a JavaBean associated with a Bean Area item.
Syntax
The built-in is available for types VARCHAR2, NUMBER, or BOOLEAN.
SET_CUSTOM_ITEM_PROPERTY
(item,
prop-name,
varchar2 value);
(item,
prop-name,
number value);
(item,
prop-name,
boolean value);
Parameters
item The name of the Bean Area item associated with the target JavaBean. The
name can be in the form of either a varchar2 literal or a variable set to the
value of the name.
prop-name The particular property of the JavaBean container associated with this Bean
Area.
value The value for the specified property. Value must be of type varchar2,
integer, or boolean.
Usage Notes
• In the JavaBean container, each property type must be represented by a single instance of the ID
class,. created by using ID.registerProperty.
• For each Set_Custom_Item_Property built-in executed in the form, the JavaBean container’s
setProperty method is called.
• The name of the Bean Area item can be gained through either Find_Item(‘Item_Name’), or simply
via ‘Item_Name’.

370
SET_CUSTOM_PROPERTY built-in
Description
Sets the value of a user-defined property in a Java pluggable component.
Syntax
The built-in is available for types VARCHAR2, NUMBER, or BOOLEAN.
SET_CUSTOM_PROPERTY
(item,
row-number,
prop-name,
value VARCHAR2);
SET_CUSTOM_PROPERTY
(item,
row-number,
prop-name,
value NUMBER);
SET_CUSTOM_PROPERTY
(item,
row-number,
prop-name,
value BOOLEAN);
Parameters
item The name or ID of the item associated with the target Java pluggable
component. The name can be in the form of either a varchar2 literal or a
variable set to the value of the name.
row-number The row number of the instance of the item that you want to set. (Instance
row numbers begin with 1.) If you want to set all the instances, specify the
constant ALL_ROWS.
prop-name The particular property of the Java component that you want to set.
value The new value for the specified property. Value must be of type varchar2,
number, or boolean.
Usage Notes
• In the Java pluggable component, each custom property must be represented by a single instance of
the ID class, created by using ID.registerProperty.
• For each Set_Custom_Property built-in executed in the form, the Java component’s setProperty
method is called.
• The name of the item can be gained through either Find_Item(‘Item_Name’), or simply via
‘Item_Name’.

371
SET_CUSTOM_PROPERTY examples
In this example, the Java pluggable component is a JavaBean. (To see the full context for this partial
code, look at the complete example.)
In the container (or wrapper) for the JavaBean:
private static final ID SETRATE =
ID.registerProperty(SetAnimationRate);
In the form, as part of the PL/SQL code activated by a When_Button_Pressed trigger on a faster button
on the end-user’s screen:
NewAnimationRate := gb.CurAnimationRate + 25
. . .
Set_Custom_Property(’Juggler_Bean’, ALL_ROWS,
’SetAnimationRate’, NewAnimationRate);
In this SET_CUSTOM_PROPERTY built-in:
• Juggler_Bean is the name of the Bean Area item in the form. The item is associated with the
container of the JavaBean.
• SetAnimationRate is a property in the container for the JavaBean.
• NewAnimationRate is a variable holding the new value for that property that is being passed to the
JavaBean container.

372
SET_FORM_PROPERTY built-in
Description
Sets a property of the given form.
Syntax
SET_FORM_PROPERTY
(formmodule_id FormModule,
property NUMBER,
value NUMBER);
SET_FORM_PROPERTY
property NUMBER,
value NUMBER);
Parameters
formmodule_id Specifies the unique ID that Form Builder assigns to the form when created.
The data type of the ID is FormModule.
formmodule_name Specifies the name of the form module that you gave the form when
property Specifies the property you want to set for the form:
CURRENT_RECORD_ATTRIBUTE Specify the VARCHAR2 name of
a named visual attribute to be associated with the given form. If the named
visual attribute does not exist, you will get an error message.
background region.
dependent.

373
background.
CURSOR_MODE Specifies the cursor state Form Builder should attempt
to define. Primarily used when connecting to non-ORACLE data sources.
Valid values are OPEN_AT_COMMIT and CLOSE_AT_COMMIT.
DEFER_REQUIRED_ENFORCEMENT Specifies whether
enforcement of required fields has been deferred from item validation to
record validation. Valid values are PROPERTY_TRUE,
PROPERTY_4_5, and PROPERTY_FALSE.
DIRECTION Specifies the layout direction for bidirectional objects.
Valid values are DIRECTION_DEFAULT, RIGHT_TO_LEFT,
LEFT_TO_RIGHT.
FIRST_NAVIGATION_BLOCK Returns the name of the block into
which Form Builder attempts to navigate at form startup. By default, the
first navigation block is the first block defined in the Object Navigator;
however, the FIRST_NAVIGATION_BLOCK block property can be set to
specify a different block as the first block at form startup.
SAVEPOINT_MODE Specifies whether Form Builder is to issue
savepoints. Valid values are PROPERTY_TRUE and
PROPERTY_FALSE.
VALIDATION Specifies whether Form Builder is to perform default
validation. Valid values are PROPERTY_TRUE and
PROPERTY_FALSE.
VALIDATION_UNIT Specifies the scope of validation for the form.
Valid values are DEFAULT_SCOPE, BLOCK_SCOPE,
RECORD_SCOPE, and ITEM_SCOPE.
described earlier:
BLOCK_SCOPE Specify when you want Form Builder to validate data
only at the block level. This means, for instance, that Form Builder
validates all the records in a block when a navigation event forces
validation by leaving the block.
CLOSE_AT_COMMIT Specify when you do not want cursors to remain
open across database commits; for example, when a form is running against
a non-ORACLE database.
DEFAULT_SCOPE Sets the Validation Unit form module property to the
default setting. On GUI window managers, the default validation unit is
ITEM.
FORM_SCOPE Specify when you want validation to occur at the form
level only.

374
ITEM_SCOPE. Specify when you want Form Builder to validate at the
item level. This means, for instance, that Form Builder validates each
changed item upon navigating out of an item as a result of a navigation
event.
OPEN_AT_COMMIT Specify when you want cursors to remain open
across database commits. This is the normal setting when running against
ORACLE.
state.
FALSE state.
RECORD_SCOPE Specify when you want Form Builder to validate at
the record level. This means that Form Builder validates each changed
record when, for instance, it leaves the record.
SET_FORM_PROPERTY examples
Example 1
/*
** Built-in: SET_FORM_PROPERTY
** Example: Set the Cursor Mode property in the current form
** to CLOSE_AT_COMMIT and changes the form
** Validation unit to the Block level.
*/
DECLARE
fm_id FormModule;
BEGIN
Set_Form_Property(fm_id,CURSOR_MODE,CLOSE_AT_COMMIT);
Set_Form_Property(fm_id,VALIDATION_UNIT,BLOCK_SCOPE);
END;
Example 2
/*
** Built-in: SET_FORM_PROPERTY
** Example: Setup form and block properties required to run
** against a particular non-Oracle datasource.
** Procedure accepts the appropriate numerical
** constants like DELAYED as arguments.
**
** Usage: Setup_Non_Oracle(PROPERTY_FALSE,
** CLOSE_AT_COMMIT,
** UPDATEABLE_PRIMARY_KEY,
** DELAYED);
*/
PROCEDURE Setup_Non_Oracle( the_savepoint_mode NUMBER,
the_cursor_mode NUMBER,
the_key_mode NUMBER,
the_locking_mode NUMBER ) IS
fm_id FormModule;
bk_id Block;
bk_name VARCHAR2(40);
BEGIN
/* ** Validate the settings of the parameters ** */
IF the_savepoint_mode NOT IN (PROPERTY_TRUE,PROPERTY_FALSE)

375
THEN
Message(’Invalid setting for Savepoint Mode.’);
END IF;
IF the_cursor_mode NOT IN (CLOSE_AT_COMMIT,OPEN_AT_COMMIT)
THEN
Message(’Invalid setting for Cursor Mode.’);
END IF;
IF the_key_mode NOT IN (UNIQUE_KEY,UPDATEABLE_PRIMARY_KEY,
NON_UPDATEABLE_PRIMARY_KEY) THEN
Message(’Invalid setting for Key Mode.’);
END IF;
IF the_locking_mode NOT IN (IMMEDIATE,DELAYED) THEN
Message(’Invalid setting for Locking Mode.’);
END IF;
/*
** Get the id of the current form
*/
/*
** Set the two form-level properties
*/
Set_Form_Property(fm_id, SAVEPOINT_MODE, the_savepoint_mode);
Set_Form_Property(fm_id, CURSOR_MODE, the_cursor_mode);
/*
** Set the block properties for each block in the form
*/
bk_name := Get_Form_Property(fm_id,FIRST_BLOCK);
WHILE bk_name IS NOT NULL LOOP
bk_id := Find_Block(bk_name);
Set_Block_Property(bk_id,LOCKING_MODE,the_locking_mode);
Set_Block_Property(bk_id,KEY_MODE,the_key_mode);
IF the_key_mode IN (UPDATEABLE_PRIMARY_KEY,
NON_UPDATEABLE_PRIMARY_KEY) THEN
Set_Block_Property(bk_id,PRIMARY_KEY,PROPERTY_TRUE);
END IF;
bk_name := Get_Block_Property(bk_id, NEXTBLOCK);
END LOOP;
END;

376
SET_GROUP_CHAR_CELL built-in
Description
Sets the value for the record group cell identified by the given row and column.
Syntax
SET_GROUP_CHAR_CELL
row_number NUMBER,
cell_value VARCHAR2);
SET_GROUP_CHAR_CELL
row_number NUMBER,
cell_value VARCHAR2);
Parameters
groupcolumn_id The unique ID that Form Builder assigns when it creates the column for the
record group. Use the FIND_COLUMN built-in to return the ID to an
groupcolumn_name The name you gave to the column when you created it, preceded by the
record group name and a dot, as in recordgroup_name.groupcolumn_name.
The data type of the name is VARCHAR2.
row_number Specifies the row number that contains the cell whose value you intend to
set. Specify as a whole NUMBER.
cell_value For a VARCHAR2 column, specifies the VARCHAR2 value you intend to
enter into a cell; for a LONG column, specifies the LONG value you
intend to enter into a cell.
SET_GROUP_CHAR_CELL restrictions
• You must create the specified row before setting the value of a cell in that row. Form Builder does
not automatically create a new row when you indicate one in this built-in. Explicitly add the row
with the ADD_GROUP_ROW built-in or populate the group with either POPULATE_GROUP or
POPULATE_GROUP_WITH_QUERY.
• Not valid for a static record group. A static record group is a record group that was created at
design time and that has the Record Group Type property set to Static.
SET_GROUP_CHAR_CELL examples
/* Built-in: SET_GROUP_CHAR_CELL
** Example: See ADD_GROUP_ROW */

377
SET_GROUP_DATE_CELL built-in
Description
Syntax
SET_GROUP_DATE_CELL
row_number NUMBER,
cell_value DATE);
SET_GROUP_DATE_CELL
row_number NUMBER,
cell_value DATE);
Parameters
cell_value Specifies the DATE value you intend to enter into a cell.
SET_GROUP_DATE_CELL restrictions
• You must create the specified row before setting the value of a cell in that row. Form Builder does
not automatically create a new row when you indicate one in this built-in. Explicitly add the row
SET_GROUP_DATE_CELL examples
/*
** Built-in: SET_GROUP_DATE_CELL
** Example: Lookup a row in a record group, and set the
** minimum order date associated with that row in
** the record group. Uses the ’is_value_in_list’
** function from the GET_GROUP_CHAR_CELL example.
*/
PROCEDURE Set_Max_Order_Date_Of( part_no VARCHAR2,

378
new_date DATE ) IS
fnd_row NUMBER;
BEGIN
/*
** Try to lookup the part number among the temporary part list
** record group named ’TMPPART’ in its ’PARTNO’ column.
*/
IF fnd_row = 0 THEN
RETURN;
ELSE
/*
** Set the corresponding Date cell value from the
** matching row.
*/
Set_Group_Date_Cell(’TMPPART.MAXORDDATE’,fnd_row,new_date );
END IF;
END;

379
SET_GROUP_NUMBER_CELL built-in
Description
Syntax
SET_GROUP_NUMBER_CELL
row_number NUMBER,
cell_value NUMBER);
SET_GROUP_NUMBER_CELL
row_number NUMBER,
cell_value NUMBER);
Parameters
cell_value Specifies the NUMBER value you intend to enter into a cell.
SET_GROUP_NUMBER_CELL restrictions
• You must create the specified row before setting the value of a cell in that row. Explicitly add a row
SET_GROUP_NUMBER_CELL examples
/*
** Built-in: SET_GROUP_NUMBER_CELL
** Example: See ADD_GROUP_ROW
*/

380
SET_GROUP_SELECTION built-in
Description
Marks the specified row in the given record group for subsequent programmatic row operations. Rows
are numbered sequentially starting at 1. If you select rows 3, 8, and 12, for example, those rows are
considered by Form Builder to be selections 1, 2, and 3. You can undo any row selections for the entire
group by calling the RESET_GROUP_SELECTION built-in.
Syntax
SET_GROUP_SELECTION
row_number NUMBER);
SET_GROUP_SELECTION
row_number NUMBER);
Parameters
created. Use the FIND_GROUP built-in to return the ID to a variable.
row_number Specifies the number of the record group row that you want to select. The
value you specify is a NUMBER.
SET_GROUP_SELECTION examples
/*
** Built-in: SET_GROUP_SELECTION
** Example: Set all of the even rows as selected in the
** record group whose id is passed-in as a
** parameter.
*/
PROCEDURE Select_Even_Rows ( rg_id RecordGroup ) IS
BEGIN
FOR j IN 1..Get_Group_Row_Count(rg_id) LOOP
IF MOD(j,2)=0 THEN
Set_Group_Selection( rg_id, j );
END IF;
END LOOP;
END;

381
SET_INPUT_FOCUS built-in
Description
Sets the input focus on the menu of the current form. Once trigger processing is completed, Form
Builder activates the menu.
Syntax
SET_INPUT_FOCUS
(MENU );
Parameters
MENU
SET_INPUT_FOCUS restrictions
Only for use in character mode and block mode environments.
SET_INPUT_FOCUS examples
/*
** Built-in: SET_INPUT_FOCUS
** Example: Directs the users input focus to the Menu when
** used with the only support parameter, MENU.
** Only has an effect on character-mode or
** block-mode devices.
*/
BEGIN
Set_Input_Focus(MENU);
END;

382
SET_ITEM_INSTANCE_PROPERTY built-in
Description
Modifies the current item instance in a block by changing the specified item property.
SET_ITEM_INSTANCE_PROPERTY does not change the appearance of items that mirror the current
instance.
You can reference any item in the current form. Note that SET_ITEM_INSTANCE_PROPERTY only
affects the display of the current instance of the item; other instances of the specified item are not
affected. This means that if you specify a display change for an item that exists in a multi-record block,
SET_ITEM_INSTANCE_PROPERTY only changes the instance of that item that belongs to the block’s
current record. If you want to change all instances of an item in a multi-record block, use
SET_ITEM_PROPERTY .
Any change made by a SET_ITEM_INSTANCE_PROPERTY remains in effect until:
• the same item instance is referenced by another SET_ITEM_INSTANCE_PROPERTY, or
• the same item instance is referenced by the DISPLAY_ITEM built-in, or
• the instance of the item is removed (e.g., through a CLEAR_RECORD or a query), or
• the current form is exited
Syntax
SET_ITEM_INSTANCE_PROPERTY
(item_id ITEM,
property NUMBER,
value VARCHAR2);
property NUMBER,
value VARCHAR2);
property NUMBER,
value NUMBER);
Parameters
item_id The unique ID that Form Builder assigned to the object when it created it.
Use the FIND_ITEM built-in to return the ID to a variable with datatype of
ITEM.
record_number The record number that you want to set. The record number is the record’s
position in the block. Specify as a whole number. You can specify
CURRENT_RECORD if you want to set the block’s current record.

383
item_name The name you gave the item when you created it. Datatype is
VARCHAR2.
property The property you want to set for the given item. Possible properties are:
BORDER_BEVEL Specifies the item border bevel for the specified item
instance. Valid values are RAISED, LOWERED, PLAIN (unbeveled), or "
". A value of " " causes the border bevel to be determined by the value
specified at the item level at design-time or by SET_ITEM_PROPERTY at
runtime.
Note: You cannot set BORDER_BEVEL if the item’s Bevel property is set
to None in Form Builder.
INSERT_ALLOWED Applies only to records not retrieved from the
database. When set to PROPERTY_TRUE at the item instance, item, and
block levels, allows the end user to modify the item instance. Setting this
property to PROPERTY_FALSE at the item instance, item, or block levels,
prohibits the end user from modifying the item instance.
NAVIGABLE When set to PROPERTY_TRUE at the item instance and
item levels, allows the end user to be able to navigate to the item instance
using default keyboard navigation. Setting this property to
PROPERTY_FALSE at the item instance or item levels, disables default
keyboard navigation to the item instance.
REQUIRED Specify the constant PROPERTY_TRUE if you want to
force the end user to enter a non-null value for the item instance. Setting
this property to PROPERTY_FALSE at the item instance and item levels,
indicates that the item instance is not required.
UPDATE_ALLOWED Applies only to records retrieved from the
database. When set to PROPERTY_TRUE at the item instance, item, and
block levels, allows the end user to modify the item instance. When set to
PROPERTY_FALSE at the instance, item, or block levels, prohibits the
end user from modifying the item instance.
VISUAL_ATTRIBUTE Specify a valid named visual attribute that exists
in the current form or ’’. Specifying ’’ leaves visual attribute unspecified at
the item instance level.
Usage Notes
When working with properties specified at multiple levels (item instance, item, and block), consider the
following guidelines:
• Required properties specified at multiple levels are ORed together
• Other boolean properties specified at multiple levels are ANDed together
The value derived from combining properties specified at the item instance, item, and block levels is
called the effective value. Some of the effects of these two rules are as follows:
• setting INSERT_ALLOWED to true has no effect at the item instance level unless it is set
consistently at the block and item levels. For example, your user cannot type data into an item
instance if INSERT_ALLOWED is true at the instance level, but not at the item or block levels.
• setting NAVIGABLE to true has no effect at the item instance level unless it is set consistently at
the item and item instance levels

384
• Setting NAVIGABLE to true may affect whether the block is considered enterable. A block’s read-
only Enterable property will be true if and only if its current record contains an item instance whose
effective value for the NAVIGABLE property is true.
• setting REQUIRED to false has no effect at the item instance level unless it is set consistently at the
item and item instance levels.
• setting UPDATE_ALLOWED to true has no effect at the item instance level unless it is set
consistently at the block, item, and item instance levels.
• setting BORDER_BEVEL at the item instance level will override the item level BORDER_BEVEL
setting, except when the item instance BORDER_BEVEL property is unspecified (that is, set to " ").
• setting VISUAL_ATTRIBUTE at the item instance level will override the properties at the item and
block levels unless you specify a partial visual attribute, in which case a merge will occur between
the partial visual attribute and the item's current visual attribute. If VISUAL_ATTRIBUTE is set to
" " at the item instance level, the item-level settings of this property are used.
• When a new record is created, its item instance properties are set to values that do not override the
values specified at higher levels. For example, the BORDER_BEVEL and VISUAL_ATTRIBUTE
properties get set to " ", REQUIRED is set to false, and other boolean properties are set to true.
• Setting an item instance property does not affect the item instance properties of any items that mirror
the specified item.
• An instance of a poplist will, when selected, display an extra null value if its current value is NULL
or if its Required property is set to false. When selecting the current value of an instance of a text
list (t-list), it will be unselected (leaving the t-list with no selected value) if its Required property is
set to false. If its Required property is set to true, selecting a t-list instance's current value will have
no effect, that is, the value will remain selected.
•
SET_ITEM_INSTANCE_PROPERTY examples
/*
** Built-in: SET_ITEM_INSTANCE_PROPERTY
** Example: Change visual attribute of each item instance in the
** current record
*/
DECLARE
cur_block VARCHAR2(80) := :System.Cursor_Block;
BEGIN
cur_itm := Get_Block_Property( cur_block, FIRST_ITEM );
WHILE ( cur_itm IS NOT NULL ) LOOP
cur_itm := cur_block||’.’||cur_itm;
Set_Item_Instance_Property( cur_itm, CURRENT_RECORD,
VISUAL_ATTRIBUTE,’My_Favorite_Named_Attribute’);
cur_itm := Get_Item_Property( cur_itm, NEXTITEM );
END LOOP;
END;

385
SET_ITEM_PROPERTY built-in
Description
Modifies all instances of an item in a block by changing a specified item property. Note that in some
cases you can get but not set certain object properties.
Syntax
SET_ITEM_PROPERTY
(item_id ITEM,
property NUMBER,
value VARCHAR2);
SET_ITEM_PROPERTY
property NUMBER,
value VARCHAR2);
SET_ITEM_PROPERTY
(item_id ITEM,
property NUMBER,
x NUMBER);
SET_ITEM_PROPERTY
property NUMBER,
x NUMBER);
SET_ITEM_PROPERTY
(item_id ITEM,
property NUMBER,
x NUMBER,
y NUMBER);
SET_ITEM_PROPERTY
property NUMBER,
x NUMBER,
y NUMBER);
Parameters
item_id The unique ID that Form Builder assigned to the object when it created it.
Use the FIND_ITEM built-in to return the ID to a variable with datatype of
ITEM.
item_name The name you gave the item when you created it. Datatype is
VARCHAR2.
property The property you want to set for the given item. Possible properties are:
ALIGNMENT The text alignment (text and display items only). Valid
values are ALIGNMENT_START, ALIGNMENT_END,
ALIGNMENT_LEFT, ALIGNMENT_ CENTER, ALIGNMENT_RIGHT.

386
AUTO_HINT Determines if Form Builder will display help hints on the
status line automatically when input focus is in the specified item. Valid
values are PROPERTY_TRUE and PROPERTY_FALSE.
AUTO_SKIP Specifies whether the cursor should skip to the next item
automatically when the end user enters the last character in a text item.
Valid only for a text item. Valid values are PROPERTY_TRUE and
PROPERTY_FALSE.
BORDER_BEVEL Specifies the item border bevel for the specified item
instance. Valid values are RAISED, LOWERED, or PLAIN (unbeveled).
Note: You cannot set BORDER_BEVEL if the item’s Bevel property is set
to None in Form Builder.
CASE_INSENSITIVE_QUERY Specifies whether query conditions
entered in the item should be case-sensitive. Valid values are
PROPERTY_TRUE and PROPERTY_FALSE.
CASE_RESTRICTION Specifies the case restriction applied to any text
entered in the indicated text item. Valid values are UPPERCASE,
LOWERCASE, or NONE.
COMPRESSSpecifies whether the sound data from a sound object should
be compressed before Form Builder writes the data to the file. Valid values
are COMPRESSION_ON, COMPRESSION_OFF, and
ORIGINAL_SETTING (retain the default compression setting of the data).
CONCEAL_DATA Specify the constant PROPERTY_TRUE if you want
the item to remain blank or otherwise obscured when the end user enters a
value. Specify the constant PROPERTY_FALSE if you want any value
that is typed into the text item to be visible.
CURRENT_RECORD_ATTRIBUTE Specifies the VARCHAR2 name
of a named visual attribute to be associated with the given item. If the
named visual attribute does not exist, you will get an error message.
background region.
dependent.

387
background.
LEFT_TO_RIGHT.
DISPLAYED Specifies whether the item will be displayed/enabled or
hidden/disabled.
ECHO Specifies whether characters an end user types into a text item
should be visible. When Echo is false, the characters typed are hidden.
Used for password protection. Valid values are PROPERTY_TRUE and
PROPERTY_FALSE.
ENABLED Specifies whether end users should be able to manipulate an
item. Valid values are PROPERTY_TRUE and PROPERTY_FALSE.
Note: Setting Enabled to false will cause other item property settings to
change. Consult the "Propagation of Property Changes" section for details.
Foreground Color.
FIXED_LENGTH Specifies whether the item’s value should be validated
against the setting of the item’s Max Length property. When
FIXED_LENGTH is true, the item is valid only if the number of characters
in its value equals the Max Length setting. Valid values are
FONT_SIZE The size of the font, specified in hundredths of a point (i.e.,
for a font size of 8 points, the value should be set to 800).
in the item.
FORMAT_MASK Specifies the display format and input accepted for
data in text items.
HEIGHT Specifies the height of the item.

388
HINT_TEXT Specifies the item-specific help text displayed on the
message line at runtime. If the text specified is NULL, the original hint text,
specified in Form Builder, will be restored.
ICON_NAME Specifies the file name of the icon resource associated with
a button item having the Iconic property set to YES.
IMAGE_DEPTH Specifies the depth of color to be applied to an image
item.
INSERT_ALLOWED In a new record, allows end user to insert items
normally when set to PROPERTY_TRUE. Specify PROPERTY_FALSE
to specify that the item does not accept modification, but is displayed
normally (not grayed out). (Insert_Allowed does not propagate changes to
the Enabled property.)
ITEM_IS_VALID Specifies whether the current item should be
considered valid. Set to PROPERTY_TRUE or PROPERTY_FALSE.
ITEM_SIZE Specifies a width and height for the item as two numbers
separated by a comma. Use the syntax that includes x, y.
KEEP_POSITION Specifies whether the Keep Cursor Position property
should be true or false. When Keep Cursor Position is true, the cursor
returns to the same position it was in when it left the text item. When Keep
Cursor Position is false, the cursor returns to the default position in the text
item. Valid values are PROPERTY_TRUE and PROPERTY_FALSE.
LABEL Specifies the VARCHAR2 string that you want displayed as the
label of the item. This property is only valid for items that have labels,
such as buttons.
LOCK_RECORD_ON_CHANGE Specify the constant
PROPERTY_TRUE if you want the record to be locked when this item is
changed. Specify the constant PROPERTY_FALSE if you do not want the
record locked when this item is changed. Use primarily when connecting to
a non-ORACLE data source that does not have row-level locking.
LOV_NAME Specify the VARCHAR2 name of an LOV to be associated
with the given item. If the LOV name does not exist, you will get an error
message.
MERGE_CURRENT_ROW_VA Merges the contents of the specified
visual attribute with the current row’s visual attribute (rather than replacing
it).
MERGE_TOOLTIP_ATTRIBUTE Merges the contents of the specified
visual attribute with the tooltip’s current visual attribute (rather than
replacing it).
MERGE_VISUAL_ATTRIBUTE Merges the contents of the specified
visual attribute with the object’s current visual attribute (rather than
replacing it).
MOUSE_NAVIGATE Specifies whether Form Builder should navigate
and set focus to the item when the end user activates the item with the
mouse. Specify the constant PROPERTY_TRUE if you want the end user
to be able to navigate to the item using the mouse. Specify the constant

389
PROPERTY_FALSE if you want a mouse click to keep the input focus in
the current item.
NAVIGABLE Specify the constant PROPERTY_TRUE if you want the
end user to be able to navigate to the item using default keyboard
navigation. Specify the constant PROPERTY_FALSE if you want to
disable default keyboard navigation to the item. (Keyboard Navigable does
not propagate changes to the Enabled property.)
NEXT_NAVIGATION_ITEM Specifies the name of the item that is
defined as the "next navigation item" with respect to this current item.
POPUPMENU_CONTENT_ITEM Specifies the setting for any of the
OLE popup menu item properties:
POPUPMENU_COPY_ITEM
POPUPMENU_CUT_ITEM
POPUPMENU_DELOBJ_ITEM
POPUPMENU_INSOBJ_ITEM
POPUPMENU_LINKS_ITEM
POPUPMENU_OBJECT_ITEM
POPUPMENU_PASTE_ITEM
POPUPEMNU_PASTESPEC_ITEM
Specify the character string HIDDEN for the OLE popup menu item not to
be displayed on the OLE popup menu. Specify the character string
ENABLED for the OLE popup menu item to be displayed and enabled.
Specify the character string DISABLED for the OLE popup menu item to
be displayed and not enabled.
POSITION Specify the x, y coordinates for the item as NUMBERs
separated by a comma. Use the syntax that includes x, y.
PREVIOUS_NAVIGATION_ITEM Specifies the name of the item that
is defined as the "previous navigation item" with respect to this current
item.
PRIMARY_KEY Specify the constant PROPERTY_TRUE to indicate
that any record inserted or updated in the block must have a unique
characteristic in order to be committed to the database. Otherwise, specify
the constant PROPERTY_FALSE.
PROMPT_ALIGNMENT_OFFSET Determines the distance between
the item and its prompt.
background region.
PROMPT_DISPLAY_STYLE Determines the prompt’s display style,
either PROMPT_FIRST_RECORD, PROMPT_HIDDEN, or
PROMPT_ALL_RECORDS.
PROMPT_EDGE Determines which edge the item’s prompt is attached
to, either START_EDGE, END_EDGE, TOP_EDGE, or
BOTTOM_EDGE.

390
PROMPT_EDGE_ALIGNMENT Determines which edge the item’s
prompt is aligned to, either ALIGNMENT_START, ALIGNMENT_END,
or ALIGNMENT_CENTER.
PROMPT_EDGE_OFFSET Determines the distance between the item
and its prompt as a VARCHAR2 value.
PROMPT_FILL_PATTERN The pattern to be used for the object's fill
PROMPT_FOREGROUND_COLOR The color of the object's
PROMPT_TEXT Determines the text label that displays for an item.
PROMPT_TEXT_ALIGNMENT Determines how the prompt is
justified, either ALIGNMENT_START, ALIGNMENT_LEFT,
ALIGNMENT_RIGHT, ALIGNMENT_CENTER, or
ALIGNMENT_END.
PROMPT_VISUAL_ATTRIBUTE Specifies the named visual attribute
that should be applied to the prompt at runtime.
background.
QUERYABLE Specify the constant PROPERTY_TRUE if you want the
end user to be able to initiate a query against the item. Specify the constant
PROPERTY_FALSE if you want to disallow the use of the item in a query.
QUERY_ONLY Specify an item to be queried, preventing that item from
becoming part of insert or update statements. QUERY_ONLY is
applicable to text items, radio groups, and check boxes. Enclose the fully-
qualified item name in single quotes.
REQUIRED Specify the constant PROPERTY_TRUE if you want to
force the end user to enter a value for the item. Specify the constant
PROPERTY_FALSE if the item is not to be required.
SHOW_FAST_FORWARD_BUTTON Specify the constant
PROPERTY_TRUE to display the fast forward button on a sound item,
PROPERTY_FALSE to hide it.

391
SHOW_PLAY_BUTTON Specify the constant PROPERTY_TRUE to
display the play button on a sound item, PROPERTY_FALSE to hide it.
Note that Form Builder will hide either play or record, but not both.
SHOW_RECORD_BUTTON Specify the constant PROPERTY_TRUE
to display the record on a sound item, PROPERTY_FALSE to hide it.
Note that Form Builder will hide either play or record, but not both.
SHOW_REWIND_BUTTON Specify the constant PROPERTY_TRUE
to display the rewind button on a sound item, PROPERTY_FALSE to hide
it.
SHOW_SLIDER Specify the constant PROPERTY_TRUE to display the
slider on a sound item, PROPERTY_FALSE to hide it.
SHOW_TIME_INDICATOR Specify the constant PROPERTY_TRUE
to display the time indicator button on a sound item, PROPERTY_FALSE
to hide it.
SHOW_VOLUME_CONTROL Specify the constant
PROPERTY_TRUE to display the volume control on a sound item,
PROPERTY_FALSE to hide it.
TOOLTIP_BACKGROUND_COLOR The color of the object’s
background region.
TOOLTIP_FILL_PATTERN The pattern to be used for the object’s fill
TOOLTIP_FONT_NAME The font family, or typeface, that should be
TOOLTIP_FONT_SIZE The size of the font, specified in points.
TOOLTIP_FONT_SPACING The width of the font, that is, the amount
TOOLTIP_FONT_STYLE The style of the font.
TOOLTIP_FONT_WEIGHT The weight of the font.
TOOLTIP_FOREGROUND_COLOR The color of the object’s
TOOLTIP_TEXT Determines the item’s tooltip text.
TOOLTIP_WHITE_ON_BLACK Specifies that the object is to appear
background.
UPDATE_ALLOWED Specify the constant PROPERTY_TRUE if you
want the end user to be able to update the item. Specify the constant
PROPERTY_FALSE if you want the item protected from update.
UPDATE_COLUMN Specify the constant PROPERTY_TRUE if this
column should be treated as updated, and included in the columns to be
written to the database. Specify the constant PROPERTY_FALSE if this

392
column should be treated as not updated, and not be included in the
columns to be written to the database.
UPDATE_NULL Specify the constant PROPERTY_TRUE if you want
the end user to be able to update the item only if its value is NULL.
Specify the constant PROPERTY_FALSE if you want the end user to be
able to update the value of the item regardless of whether the value is
NULL.
UPDATE_PERMISSION Use UPDATE_ ALLOWED when you run
against non-ORACLE data sources. Specify the constant
PROPERTY_TRUE to turn on the item’s UPDATEABLE and
UPDATE_NULL properties. Specify the constant PROPERTY_FALSE to
turn off the item’s UPDATEABLE and UPDATE_NULL properties.
VALIDATE_FROM_LIST Specifies that Form Builder should validate
the value of the text item against the values in the attached LOV when set to
PROPERTY_TRUE. Specify PROPERTY_FALSE to specify that Form
Builder should not use the LOV for validation.
VISIBLE Specifies whether the indicated item should be visible or hidden.
Valid values are PROPERTY_TRUE and PROPERTY_FALSE.
Note: Setting Visible to false will cause other item property settings to
change. Consult the "Propagation of Property Changes" section for details.
VISUAL_ATTRIBUTE Specify a valid named visual attribute that exists
in the current form.
Note: You cannot set the visual attribute for an image item.
WIDTH Specify the width of the item as a NUMBER. The size of the
units depends on how you set the Coordinate System property and default
font scaling for the form.
X_POS Specify the x coordinate as a NUMBER.
Y_POS Specify the y coordinate as a NUMBER.
value Specify the value to be applied to the given property. The data type of the
property determines the data type of the value you enter. For instance, if
you want to set the VISIBLE property to true, you specify the constant
PROPERTY_TRUE for the value. If you want to change the LABEL for
the item, you specify the value, in other words, the label, as a VARCHAR2
string.
state.
FALSE state.
If you want to reset the value of the property to be the value originally
established for it at design time, enter two single quotes with no space
between: ‘’. For example, SET_ITEM_PROPERTY(‘DEPTNO’,

393
FORMAT_MASK, ‘’); would reset that format mask to its design-time
value.
x Specifies the NUMBER value of the x coordinate or the width, depending
on the property you specified. Specify the argument in form coordinate
system units.
y Specifies the NUMBER value of the y coordinate or the height, depending
system units.
Usage Notes
The following issues can affect your decisions on how to apply certain property values to an item:
• validation of property changes
• propagation of property changes
Validation of Property Changes When you specify a change through the SET_ITEM_PROPERTY
built-in, Form Builder validates the change before it adjusts the property. If the change is validated,
Form Builder makes the change and leaves it in effect until another SET_ITEM_PROPERTY changes
the same property or the current form is exited.
Illegal Settings If the change is not validated, Form Builder issues an error message. You cannot use
SET_ITEM_PROPERTY to set the following item properties true or false, given the following target
item conditions.
You cannot set this
property parameter...
To this restricted setting If this target item
condition is true:
(All) true/false • NULL-canvas item
(item's canvas
property is null)
ENABLED true/false
true
• current item
• Visible item
property is false
INSERT_ALLOWED true
true
• Enabled item
property is false
• Visible item
property is false
NAVIGABLE true/false
true
• current item
• Visible item
property is false

394
QUERYABLE
(Query Allowed)
true • Visible item
property is false
UPDATE_ALLOWED true
true
• Enabled item
property is false
• Conceal Data item
property is true
UPDATE_NULL
(Update if NULL)
true
true
• Enabled item
property is false
• Conceal Data item
property is true
VISIBLE true/false • current item
•
Form Builder does not consider the current contents of an item before allowing a property change. If
SET_ITEM_PROPERTY changes an item property that would affect how Form Builder validates the
data in an item (for example, FIXED_LENGTH or REQUIRED), the validation consequences are not
retroactive. The new validation rules do not apply to the item until Form Builder next validates it under
normal circumstances.
For example, suppose the application has a required text item, such as Employee ID. In the application,
the end user needs to be able to leave this item (behavior not allowed for a REQUIRED item), so you
temporarily set the REQUIRED property to False. At this point, Form Builder marks an existing NULL
value as VALID. Later in the application, when you set the REQUIRED property to true again, Form
Builder does not automatically change the VALID/INVALID marking. In order to have a NULL value
marked as INVALID (expected for a REQUIRED item), you must make a change in the item that will
cause Form Builder to validate it, such as:
IF :block.item IS NULL
THEN :block.item := NULL;
Propagation of Property Changes You can only specify a change to one item property at a time
through the SET_ITEM_PROPERTY built-in. However, one SET_ITEM_PROPERTY statement can
cause changes to more than one item property if the additional changes are necessary to complete, or
propagate, the intended change. This is included primarily for compatibility with prior versions.
The following table shows the SET_ITEM_PROPERTY settings that cause Form Builder to propagate
changes across item properties:
Setting this property
parameter...
To this setting Also causes these
propagated changes:
ENABLED False • sets the Navigable
item property to
False
• sets the
Update_Null item

395
property to False
• sets the Updateable
item property to
False
• sets the Required
item property to
False
DISPLAYED False • sets the Enabled
and Navigable item
properties to False
• sets the Updateable
item property to
False
• sets the
Update_Null item
property to False
• sets the Required
item property to
False
• sets the Queryable
item property to
False
UPDATEABLE True • sets the
Update_Null item
property to False
UPDATE_NULL True • sets the Updateable
item property to
False
SET_ITEM_PROPERTY examples
/*
** Built-in: SET_ITEM_PROPERTY
** Example: Change the icon of an iconic button dynamically
** at runtime by changing its icon_name. The user
** clicks on this button to go into enter query
** mode, then clicks on it again (after the icon
** changed) to execute the query. After the query
** is executed the user sees the original icon
** again.
*/
DECLARE
it_id Item;
BEGIN
it_id := Find_Item(’CONTROL.QUERY_BUTTON’);
IF :System.Mode = ’ENTER-QUERY’ THEN
/*
** Change the icon back to the enter query icon, and
** execute the query.
*/
Set_Item_Property(it_id,ICON_NAME,’entquery’);
Execute_Query;

396
ELSE
/*
** Change the icon to the execute query icon and get
** into enter query mode.
*/
Set_Item_Property(it_id,ICON_NAME,’exequery’);
Enter_Query;
END IF;
END;

397
SET_LOV_COLUMN_PROPERTY built-in
Description
Sets the given LOV property for the given LOV.
Syntax
SET_LOV_COLUMN_PROPERTY
(lov_id LOV,
colnum NUMBER,
property NUMBER,
value VARCHAR2);
SET_LOV_COLUMN_PROPERTY
(lov_name VARCHAR2,
colnum NUMBER,
property NUMBER,
value VARCHAR2);
Parameters
lov_id Specifies the unique ID that Form Builder assigns the LOV when created.
Use the FIND_LOV built-in to return the ID to an appropriately typed
variable. The data type of the ID is LOV.
lov_name Specifies the LOV name (as a VARCHAR2).
colnum Specifies the column to be modified (as a NUMBER). The first column is
column 1.
TITLE Sets the Column Title property that controls the title that displays
above an LOV column.
Note: Setting the column title to NULL resets the column title to the title
specified at design time.
WIDTH Specifies the width to be reserved in the LOV for displaying
column values.
Note: Setting the column width to NULL results in a hidden, or non-
displayed, column.
value The VARCHAR2 or NUMBER value that represents the desired property
setting.

398
SET_LOV_PROPERTY built-in
Description
Sets the given LOV property for the given LOV.
Syntax
SET_LOV_PROPERTY
(lov_id LOV,
property NUMBER,
value NUMBER);
SET_LOV_PROPERTY
(lov_name VARCHAR2,
property NUMBER,
value NUMBER);
SET_LOV_PROPERTY
(lov_id LOV,
property NUMBER,
x NUMBER,
y NUMBER);
SET_LOV_PROPERTY
(lov_name VARCHAR2,
property NUMBER,
x NUMBER,
y NUMBER);
Parameters
lov_name Specifies the LOV name (as a VARCHAR2).
AUTO_REFRESH Specifies whether Form Builder re-executes the query
each time the LOV is invoked.
GROUP_NAME Specifies the record group with which the LOV is
associated.
LOV_SIZE Specifies a width, height pair indicating the size of the LOV.
POSITION Specifies an x, y pair indicating the position of the LOV.
TITLE Specifies the title of the LOV. Overrides the value specified in the
Form Builder unless the property value is NULL.
value Specify one of the following constants:

399
state.
FALSE state.
Recordgroup Name Specify the VARCHAR2 name of the record group you are setting. You
can create this record group in Form Builder or programmatically, as long
as the record group exists when the SET_LOV_PROPERTY is called.
x Specify either the x coordinate or the width, depending on the property you
specified.
y Specify either the y coordinate or the height, depending on the property you
specified.
SET_LOV_PROPERTY restrictions
• You can set only one property per call to the built-in.
SET_LOV_PROPERTY examples
/*
** Built-in: SET_LOV_PROPERTY
** Example: if LOV is currently base on GROUP1,
** make LOV use GROUP2
*/
DECLARE
lov_id LOV;
BEGIN
lov_id := Find_LOV(’My_LOV_1’);
IF Get_LOV_Property(lov_id,GROUP_NAME) = ’GROUP1’ THEN
Set_LOV_Property(lov_id,GROUP_NAME,’GROUP2’);
ENDIF;
END;

400
SET_MENU_ITEM_PROPERTY built-in
Description
Modifies the given properties of a menu item.
Syntax
SET_MENU_ITEM_PROPERTY
(menuitem_id MenuItem,
property NUMBER,
value NUMBER);
SET_MENU_ITEM_PROPERTY
(menu_name.menuitem_name VARCHAR2,
property NUMBER,
value NUMBER);
Parameters
menuitem_id Specifies the unique ID Form Builder assigns when it creates the menu
item. Use the FIND_MENU_ITEM built-in to return the ID to an
appropriately typed variable. The data type of the ID is MenuItem.
menu_name.menuitem_name Specifies the VARCHAR2 name you gave to the menu item when you
defined it. If you specify the menu item by name, include the qualifying
menu name, as shown in the syntax.
property Specify one of the following constants to set information about the menu
item:
CHECKED Specifies the Checked property, which indicates if a check
box menu item or a radio menu item is in the checked state or unchecked
state.
ENABLED Specifies whether the menu item is enabled (thus active) or
disabled (thus greyed out and unavailable to the operator).
a menu item having the Icon in Menu property set to TRUE.
LABEL Specifies the character string for the menu item label.
VISIBLE Specifies whether the menu item is visibly displayed.
value Specify one of the following constants:
state.
FALSE state.
Label Specify the VARCHAR2 label name.

401
SET_MENU_ITEM_PROPERTY restrictions
These restrictions apply only if the menu module’s Use Security property is set to Yes:
• If the menu module Use Security property is Yes, whether you can set the property of a menu item
using SET_MENU_ITEM_PROPERTY depends on whether the form operator has access
privileges for that item.
• If the menu item is hidden and the operator does not have security access to a menu item, Runform
does not display that item. You cannot set the property of a menu item using
SET_MENU_ITEM_PROPERTY if the item is currently hidden.
• If the menu item is displayed, but disabled and the Display w/o Priv property for this menu item was
set in Form Builder, Runform displays the item in a disabled state. In this case, you can set the
menu item properties programmatically.
SET_MENU_ITEM_PROPERTY examples
/*
** Built-in: SET_MENU_ITEM_PROPERTY
** Example: See GET_MENU_ITEM_PROPERTY
*/

402
SET_OLE built-in
Description
Changes the value of an OLE property.
There are three versions of the procedure, one for each of the new-value types: NUMBER, VARCHAR,
and OLEVAR.
Syntax
PROCEDURE SET_OLE
(obj OLEOBJ, memberid PLS_INTEGER
newval NUMBER, vtype VT_TYPE);
PROCEDURE SET_OLE
newval VARCHAR2, vtype VT_TYPE);
PROCEDURE SET_OLE
newval OLEVAR, vtype VT_TYPE);
Parameters
obj A pointer to the OLE object.
memberid The member ID of the OLE property.
newval A new value of the specified type to replace the OLE
property.
vtype The VT_TYPE of the original variant.
value for the NUMBER version of the procedure is
VT_R8. For the VARCHAR2 version, the default is
VT_BSTR. For the OLEVAR version, the default is
VT_VARIANT: that is, whatever type the variant itself
actually specifies .
Usage Notes
If INIT_OLEARGS and ADD_OLEARG calls precede this SET_OLE call, and there have been no
intervening GET_OLE, SET_OLE, or CALL_OLE calls, then this call will access the property by using
the arguments specified in those INIT_OLEARGS and ADD_OLEARG calls.

403
SET_PARAMETER_ATTR built-in
Description
Sets the type and value of an indicated parameter in an indicated parameter list.
Syntax
SET_PARAMETER_ATTR
(list PARAMLIST,
key VARCHAR2,
paramtype NUMBER,
value VARCHAR2);
SET_PARAMETER_ATTR
(name VARCHAR2,
key VARCHAR2,
paramtype NUMBER,
value VARCHAR2);
Parameters
list or name Specifies the parameter list. The actual parameter can be either a parameter
list ID of type PARAMLIST, or the VARCHAR2 name of the parameter
list.
key The VARCHAR2 name of the parameter.
paramtype Specifies the type of parameter you intend to pass:
DATA_PARAMETER Indicates that the parameter’s value is the name of
a record group.
TEXT_PARAMETER Indicates that the parameter’s value is an actual
data value.
value The value of the parameter specified as a VARCHAR2 string.

404
SET_RADIO_BUTTON_PROPERTY built-in
Description
Sets the given property for a radio button that is part of the given radio group specified by the item_name
or item_id.
Syntax
SET_RADIO_BUTTON_PROPERTY
(item_id VARCHAR2,
property NUMBER,
value NUMBER);
(item_id VARCHAR2,
property NUMBER,
x NUMBER,
y NUMBER);
property NUMBER,
x NUMBER,
y NUMBER);
property NUMBER,
value NUMBER);
Parameters
item_id Specifies the radio group item ID. Form Builder assigns the unique ID at
the time it creates the object. Use the FIND_ITEM built-in to return the
ID to an appropriately typed variable.
item_name Specifies the name of the radio group. The radio group is the owner or
parent of its subordinate radio buttons. The data type of the name is
VARCHAR2.
button_name Specifies the name of the radio button whose property you want to set. The
property Specifies the property you want to set. The possible property constants you
can set are as follows:
ENABLED Specify PROPERTY_TRUE constant if you want to enable
the radio button. Specify PROPERTY_FALSE if you want to disable the
radio button from operator control.

405
Foreground Color.
in the item.
HEIGHT Specify the height of the given radio button. Specify the value
as a number.
ITEM_SIZE Sets the width and height of the given radio button. Use the
syntax that shows an x,y coordinate pair and specify the values as numbers.
LABEL Specify the actual string label for that radio button.
POSITION Sets the position of the given radio button. Use the syntax
that shows an x,y coordinate pair and specify the values as numbers.
PROMPT The text displayed in the object.
background region.
PROMPT_FILL_PATTERN The pattern to be used for the object’s fill
PROMPT_FOREGROUND_COLOR The color of the object’s
background.

406
VISIBLE Specify PROPERTY_TRUE constant if you want the radio
button to be displayed. Specify PROPERTY_FALSE constant if you want
the radio button to be hidden.
VISUAL_ATTRIBUTE Specifies either a valid named visual attribute
that exists in the current form, or the name of a logical attribute definition in
a runtime resource file that you want Form Builder to apply to the radio
button.
WIDTH Specify the width of the given radio button. Specify the value as
a number.
X_POS Specify the x-coordinate for the radio button. Specify the value as
a number.
Y_POS Specify the y-coordinate for the radio button. Specify the value as
a number.
value Specifies a NUMBER or a VARCHAR2 value. The data type of the value
you enter is determined by the data type of the property you specified. If
you enter a VARCHAR2 value, you must enclose it in quotes, unless you
reference a text item or variable.
state.
FALSE state.
x Specifies the first numeric value for the ITEM_SIZE and POSITION
properties.
y Specifies the second numeric value for the ITEM_SIZE and POSITION
properties.
SET_RADIO_BUTTON_PROPERTY examples
/*
** Built-in: SET_RADIO_BUTTON_PROPERTY
** Example: Set a particular radio button to disabled.
*/
BEGIN
Set_Radio_Button_Property(’MYBLOCK.FLIGHT_STATUS’,
’GROUNDED’,ENABLED,PROPERTY_FALSE);
END;

407
SET_RECORD_PROPERTY built-in
Description
Sets the specified record property to the specified value.
Syntax
SET_RECORD_PROPERTY
(record_number NUMBER,
block_name VARCHAR2,
property NUMBER,
value NUMBER);
Parameters
record_number Specifies the number of the record whose status you want to set. The
record number is the record’s position in the block. Specify as a whole
number.
block_name Specifies the name of the block in which the target record exists. The data
property Use the following property:
STATUS Specifies that you intend to change the record status. STATUS
is a constant.
value Use one of the following values:
CHANGED_STATUS Specifies that the record should be marked for
update and should be treated as an update when the next commit action
occurs.
INSERT_STATUS Specifies that the record is to be marked as an
INSERT and should be inserted into the appropriate table when the next
commit action occurs.
NEW_STATUS Specifies that the record is to be treated as a NEW
record, that is, a record that has not been marked for insert, update, or
query. Changed but uncleared or uncommitted records cannot be assigned
a status of NEW.
QUERY_STATUS Specifies that the record is to be treated as a QUERY
record, whether it actually is. See also the
CREATE_QUERIED_RECORD built-in.
SET_RECORD_PROPERTY restrictions
The following table illustrates the valid transition states of a record.

408
Current Status Target
Status
NEW QUERY INSERT CHANGED
NEW yes yes1 yes2 no
QUERY yes4 yes no yes
INSERT yes4 yes3 yes no
CHANGED yes4 no no yes
1. Adheres to the rules described in footnotes 2 and 3.
2. This transition is not allowed in query mode, because QUERY and INSERT are not valid in query
mode.
3. If this transition is performed while Runform is running in Unique Key modeand not all of the
transactional triggers exist, then you must enter a valid value in the ROWID field. Put another way, if
you are connected to a non-ORACLE data source that does not support ROWID, but you are using a
unique key, you must supply the key for a record that goes from Insert to Query, in one of the
transactional triggers, either On-Lock, On-Update, or On-Delete. Otherwise Form Builder returns an
error.
4. Records that have been changed but not yet committed or cleared cannot be assigned a status of NEW.
SET_RECORD_PROPERTY examples
/*
** Built-in: SET_RECORD_PROPERTY
** Example: Mark the third record in the EMP block as if it
** were a queried record.
*/
BEGIN
Set_Record_Property( 3, ’EMP’, STATUS, QUERY_STATUS);
END;

409
SET_RELATION_PROPERTY built-in
Description
Sets the given relation property in a master-detail relationship.
Syntax
SET_RELATION_PROPERTY
(relation_id Relation,
property NUMBER,
value NUMBER);
SET_RELATION_PROPERTY
(relation_name VARCHAR2,
property NUMBER,
value NUMBER);
Parameters
relation_id Specifies the unique ID that Form Builder assigns the relation when it
creates the relation object. This can occur automatically when you define a
master-detail relationship in the Form Builder, or you can explicitly create
the relation. The data type of the ID is Relation.
relation_name Specifies the name you or Form Builder gave the relation object when
defining it. The data type of the name is VARCHAR2.
property Use one of the following relation properties, which can be passed to the
built-in as a constant:
AUTOQUERY Specifies that the detail block of this relation is to be
automatically coordinated upon instantiation of the block. This allows
potentially expensive processing to be deferred until blocks that are
involved in relations are actually visited. Valid values are
DEFERRED_COORDINATION Specifies that a block requiring
coordination is to be marked but not coordinated until the detail blocks are
instantiated. Deferred coordination refers only to the population phase of
coordination. Even deferred detail blocks are cleared during the clear
phase of coordination to present the form in a visually consistent state.
MASTER_DELETES Specifies the default relation behavior for deletion
of a detail record in the detail block when there is a corresponding master
record in the master block. Valid values are NON-ISOLATED,
ISOLATED, or CASCADING. The ability to set this property
programmatically is included only for designers who are coding their own
master-detail coordination. It does not alter a default relation that was
created at design time.

410
PREVENT_MASTERLESS_OPERATION Specifies that operations in
a detail block are not allowed when no corresponding master record exists.
value The following constants can be supplied for the properties described
earlier:
CASCADING Specifies that the MASTER_DELETES property is to be
set so that when an operator deletes a master record, its corresponding
detail records are locked at the same time as the master records are locked.
ISOLATED Specifies that the MASTER_DELETES property is to be set
so that an operator can delete a master record for which detail records exist.
This does not cause subsequent locking and deletion of detail records,
however, Form Builder still initiates detail block coordination in this case.
NON_ISOLATED Specifies that the MASTER_DELETES property is to
be set so that if the operator attempts to delete a master record for which
detail records exist, Form Builder issues an error message and disallows the
deletion.
state.
FALSE state.
SET_RELATION_PROPERTY restrictions
You can only set one property per call to this built-in.
SET_RELATION_PROPERTY examples
/*
** Built-in: SET_RELATION_PROPERTY
** Example: Set the coordination behavior of a relation to
** be deferred, and auto-query.
*/
PROCEDURE Make_Relation_Deferred( rl_name VARCHAR2 ) IS
rl_id Relation;
BEGIN
/*
** Look for the relation’s ID
*/
rl_id := Find_Relation( rl_name );
/*
** Set the two required properties
*/
Set_Relation_Property(rl_id,AUTOQUERY,PROPERTY_TRUE);
END;

411
SET_REPORT_OBJECT_PROPERTY built-in
Description
Programmatically sets the value of a report property.
Syntax
PROCEDURE SET_REPORT_OBJECT_PROPERTY
property NUMBER,
value VARCHAR2
);
property NUMBER,
value VARCHAR2
);
property NUMBER,
value NUMBER
);
property NUMBER,
value NUMBER
);
Parameters
report_id Specifies the unique ID of the report. You can get the report ID for a
particular report using FIND_REPORT_OBJECT .
report_name Specifies the unique name of the report.
property One of the following constants:
REPORT_EXECUTION_MODE: The report execution mode, either
BATCH or RUNTIME
REPORT_COMM_MODE: The report communication mode, either
SYNCHRONOUS or ASYNCHRONOUS
REPORT_DESTYPE: The report destination type, either PREVIEW,
FILE, PRINTER, MAIL, CACHE or SCREEN
One of the following strings:
REPORT_FILENAME: The report filename
REPORT_SOURCE_BLOCK: The report source block name
REPORT_QUERY_NAME: The report query name

412
REPORT_DESNAME: The report destination name
REPORT_DESFORMAT: The report destination format
REPORT_SERVER: The report server name
REPORT_OTHER: The other user-specified report properties
value One of the following constants:
REPORT_EXECUTION_MODE: Value must be BATCH or RUNTIME
REPORT_COMM_MODE: Value must be SYNCHRONOUS or
ASYNCHRONOUS
REPORT_DESTYPE: Value must be PREVIEW, FILE, PRINTER, MAIL,
CACHE, or SCREEN
One of the following strings:
REPORT_FILENAME: Value must be of type VARCHAR2
REPORT_SOURCE_BLOCK: Value must be of type VARCHAR2
REPORT_QUERY_NAME: Value must be of type VARCHAR2
REPORT_DEST_NAME: Value must be of type VARCHAR2
REPORT_DEST_FORMAT: Value must be of type VARCHAR2
REPORT_SERVER: Value must be of type VARCHAR2
REPORT_OTHER: Value must be of type VARCHAR2
Usage Notes
• SET_REPORT_OBJECT_PROPERTY sets properties using constant or string values. The value
type depends on the particular property being set, as specified above. In contrast,
GET_REPORT_OBJECT_PROPERTY returns a string value for all properties.
SET_REPORT_OBJECT_PROPERTY examples
DECLARE
report_prop VARCHAR2(20);
BEGIN
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE,
BATCH);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE,
SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, FILE);
END;

413
SET_TAB_PAGE_PROPERTY built-in
Description
Sets the tab page properties of the specified tab canvas page.
Syntax
SET_TAB_PAGE_PROPERTY
(tab_page_id TAB_PAGE,
property NUMBER,
value NUMBER);
SET_TAB_PAGE_PROPERTY
(tab_page_name VARCHAR2,
property NUMBER,
value NUMBER);
Parameters
tab_page_id The unique ID Form Builder assigns to the tab page when it creates it.
Datatype is TAB_PAGE.
tab_page_name The name you gave the tab page when you defined it. Datatype is
VARCHAR2.
property The property you want to set for the given tab page. Possible values are:
ENABLED Specify TRUE to enable the tab page, FALSE to disable it
(i.e., make it greyed out and unavailable).
Foreground Color.
in the item.
LABEL The character string for the tab page label.

414
VISIBLE Specify TRUE to make the tab page visible, FALSE to make it
not visible. A tab page is reported visible if it is currently mapped to the
screen, even if it is entirely hidden behind another tab page.
VISUAL_ATTRIBUTE Specifies the name of the visual attribute
currently in force.
value You can pass the following constants as arguments to the property values
described earlier:
PROPERTY_TRUE (sets the property to the TRUE state)
PROPERTY_FALSE (sets the property to the FALSE state)
SET_TAB_PAGE_PROPERTY examples
/* Example 1: Use SET_TAB_PAGE_PROPERTY to set the
** ENABLED property to TRUE for a tab page (if it currently
** is set to FALSE:
*/
DECLARE
tb_pg_id TAB_PAGE;
BEGIN
tb_pg_id := FIND_TAB_PAGE(’tab_page_1’);
IF GET_TAB_PAGE_PROPERTY(tb_pg_id, enabled) = ’FALSE’ THEN
SET_TAB_PAGE_PROPERTY(tb_pg_id, enabled, property_true);
END IF;
END;

415
SET_TIMER built-in
Description
Changes the settings for an existing timer. You can modify the interval, the repeat parameter, or both.
Syntax
SET_TIMER
(timer_id Timer,
iterate NUMBER);
SET_TIMER
(timer_name VARCHAR2,
iterate NUMBER);
Parameters
timer_id Specifies the unique ID that Form Builder assigns when it creates the timer,
specifically as a response to a successful call to the CREATE_TIMER
built-in. Use the FIND_TIMER built-in to return the ID to an
appropriately typed variable. The data type of the ID is Timer.
timer_name Specifies the name you gave the timer when you defined it. The data type
milliseconds Specifies the duration of the timer in milliseconds. The range of values
allowed for this parameter is 1 to 2147483648 milliseconds. Values >
2147483648 will be rounded down to 2147483648. Note that only
positive numbers are allowed. The data type of the parameter is
NUMBER. See Restrictions below for more information.
NO_CHANGE Specifies that the milliseconds property is to remain at its
current setting.
iterate Specifies the iteration of the timer.
REPEAT Indicates that the timer should repeat upon expiration. Default.
NO_REPEAT Indicates that the timer should not repeat upon expiration,
but is to be used once only, until explicitly called again.
NO_CHANGE Specifies that the iterate property is to remain at its current
setting.
SET_TIMER restrictions
• Values > 2147483648 will be rounded down to 2147483648.
• A value less than 1 results in a runtime error.

416
• A value greater than the stated upper bound results in an integer overflow.
• Milliseconds cannot be expressed as a negative number.
• No two timers can share the same name in the same form instance, regardless of case.
• If there is no When-Timer-Expired trigger defined at the execution of a timer, Form Builder returns
an error.
• If there is no When-Timer-Expired trigger defined at the execution of a timer, and the timer is a
repeating timer, subsequent repetitions are canceled, but the timer is retained.
SET_TIMER examples
/*
** Built-in: SET_TIMER
** Example: See FIND_TIMER
*/

417
SET_TREE_NODE_PROPERTY built-in
Description
Sets the state of a branch node.
Syntax
PROCEDURE SET_TREE_NODE_PROPERTY
node FTREE.NODE,
property NUMBER,
value NUMBER);
node FTREE.NODE,
property NUMBER,
value VARCHAR2);
(item_id ITEM,
node FTREE.NODE,
property NUMBER,
value NUMBER);
(item_id ITEM,
node FTREE.NODE,
property NUMBER,
value VARCHAR2);
Enter Query Mode no
Parameters
NODE_STATE Possible values are
EXPANDED_NODE, COLLAPSED_NODE, and
LEAF_NODE.
NODE_LABEL Sets the label of the node.
NODE_ICON Sets the icon of the node.

418
NODE_VALUE Sets the value of the node.
value The actual value you intend to pass.
SET_TREE_NODE_PROPERTY examples
/*
** Built-in: SET_TREE_NODE_PROPERTY
*/
-- trigger to change the icon of the node clicked on.
DECLARE
htree ITEM;
current_node FTREE.NODE;
find_node FTREE.NODE;
BEGIN
-- Change it icon of the clicked node.
-- The icon file will be located using the
-- UI60_ICON environment variable in client/server
-- or in the virtual directory for web deployment.
Ftree.Set_Tree_Node_Property(htree, :SYSTEM.TRIGGER_NODE,
Ftree.NODE_ICON, ’Open’);
END;

419
SET_TREE_PROPERTY built-in
Description
Sets the value of the indicated hierarchical tree property.
Syntax
PROCEDURE SET_TREE_PROPERTY
property NUMBER,
value NUMBER);
property NUMBER,
value VARCHAR2);
property NUMBER,
value RECORDGROUP);
(item_id ITEM,
property NUMBER,
value NUMBER);
(item_id ITEM,
property NUMBER,
value VARCHAR2);
(item_id ITEM,
property NUMBER,
value RECORDGROUP);
Enter Query Mode no
Parameters
RECORD_GROUP Replaces the data set of the
hierarchical tree with a record group and causes it to
display.

420
QUERY_TEXT Replaces the data set of the
hierarchical tree with an SQL query and causes it to
display.
ALLOW_EMPTY_BRANCHES Possible values are
value Specify the value appropriate to the property you are
setting:
PROPERTY_TRUE The property is to be set to the
TRUE state.
PROPERTY_FALSE The property is to be set to the
FALSE state.
SET_TREE_PROPERTY examples
/*
** Built-in: SET_TREE_PROPERTY
*/
-- This code could be used in a WHEN-NEW-FORM-INSTANCE
-- trigger to initially populate the hierarchical tree
-- with data.
DECLARE
htree ITEM;
v_ignore NUMBER;
rg_emps RECORDGROUP;
BEGIN
-- Check for the existence of the record group.
rg_emps := Find_Group(’emps’);
IF NOT Id_Null(rg_emps) THEN
DELETE_GROUP(rg_emps);
END IF;
-- Create the record group.
rg_emps := Create_Group_From_Query(’rg_emps’,
’select 1, level, ename, NULL, to_char(empno) ’ ||
’from emp ’ ||
’connect by prior empno = mgr ’ ||
’start with job = ’’PRESIDENT’’’);
-- Populate the record group with data.
v_ignore := Populate_Group(rg_emps);
-- Transfer the data from the record group to the
hierarchical

421
-- tree and cause it to display.
Ftree.Set_Tree_Property(htree, Ftree.RECORD_GROUP, rg_emps);
END;

422
SET_TREE_SELECTION built-in
Description
Specifies the selection of a single node.
Syntax
PROCEDURE SET_TREE_SELECTION
node NODE,
selection_type NUMBER);
PROCEDURE SET_TREE_SELECTION
(item_id ITEM,
node NODE,
selection_type NUMBER);
Enter Query Mode no
Parameters
selection_type Specifies the type of selection.
SELECT_ON Selects the node.
SELECT_OFF Deselects the node.
SELECT_TOGGLE Toggles the selection state of the
node.
SET_TREE_SELECTION examples
/*
** Built-in: SET_TREE_SELECTION
*/
-- This code could be used in a WHEN-TREE-NODE-EXPANDED
-- trigger and will mark the clicked node as selected.
DECLARE
htree ITEM;

423
BEGIN
-- Mark the clicked node as selected.
Ftree.Set_Tree_Selection(htree, :SYSTEM.TRIGGER_NODE,
Ftree.SELECT_ON);
END;

424
SET_VA_PROPERTY built-in
Description
Modifies visual attribute property values for the specified property.
Syntax
SET_VA_PROPERTY
property NUMBER
value VARCHAR2);
SET_VA_PROPERTY
(va_name VARCHAR2
property NUMBER
value VARCHAR2);
SET_VA_PROPERTY
property NUMBER
value NUMBER);
SET_VA_PROPERTY
(va_name VARCHAR2
property NUMBER
value NUMBER);
Parameters
va_id The unique ID Form Builder assinged to the visual
attribute when you created it. The data type is
VISUALATTRIBUTE.
Property Specify one of the following properties:
BACKGROUND_COLOR The color of the object’s
background region.
FILL_PATTERN The pattern to be used for the object’s
fill region. Patterns are rendered in the two colors
FONT_NAME The font family, or typeface, that should
be used for text in the object. The list of fonts available
is system-dependent.
FONT_SIZE The size of the font, specified in hundreds
of points.

425
value
FONT_SPACING The width of the font, that is, the
FOREGROUND_COLOR The color of the object’s
foreground region. For items, the Foreground Color
WHITE_ON_BLACK Specifies that the object is to
appear on a monochrome bitmap display device as white
text on a black background.
Specify the value to be applied to the given property.
The data type of the property determines the data type of
the value you enter. For instance, if you want to set the
WHITE_ON_BLACK property to true, specify the
constant PROPERTY_TRUE for the value. If you want
to change the FONT_NAME for the item, specify the
value, in other words, the label, as a VARCHAR2 string.
PROPERTY_TRUE Specifies that the property is to be
set to the TRUE state.
PROPERTY_FALSE Specifies that the property is to be
set to the FALSE state.
If you want to reset the value of the property to be the
value originally established for it at design time, enter
two single quotes with no space between: ’’. For example,
SET_ITEM_PROPERTY(’DEPTNO’, FONT_SIZE, ’’);
would reset that format size to its design-time value.

426
SET_VAR built-in
Description
Sets a newly-created OLE variant to its initial value. Or, resets an existing OLE variant to a new value.
There are four versions of the procedure, one for each of the new value types CHAR, NUMBER,
OLEVAR, and table.
Syntax
PROCEDURE SET_VAR
(var OLEVAR, newval CHAR
vtype VT_TYPE, arrspec VARCHAR2);
PROCEDURE SET_VAR
(var OLEVAR, newval NUMBER
PROCEDURE SET_VAR
(var OLEVAR, newval OLEVAR
PROCEDURE SET_VAR
(var OLEVAR, source_table,
Parameters
var The variant to be set.
newval The value to be given to the variant.
vtype The OLE VT_TYPE to be given to the variant.
This is an optional parameter. If not specified, the
default value for the NUMBER version of the procedure
is VT_R8. For the VARCHAR2 version, the default is
VT_BSTR. For the OLEVAR version, the default is
VT_VARIANT: that is, whatever type the variant value
actually specifies .
source_table A PL/SQL table whose dimensions and element values
are to be given to the variant.
arrspec Indicates which selected element or elements of the
source table are to be used in the creation of the new
variant. For more information, see Specifiers for OLE
Arrays
This is an optional parameter. If not specified, the entire
source table is used..
Usage Notes
The target variant in this SET_VAR procedure must first be created with the CREATE_VAR function.

427
SET_VIEW_PROPERTY built-in
Description
Sets a property for the indicated canvas. You can set only one property per call to the built-in. In other
words, you cannot split the argument in such a way that the x coordinate applies to X_POS and the y
coordinate applies to the HEIGHT.
Syntax
SET_VIEW_PROPERTY
(view_id ViewPort,
property NUMBER,
value NUMBER);
SET_VIEW_PROPERTY
(view_id ViewPort,
property NUMBER,
x NUMBER,
y NUMBER);
SET_VIEW_PROPERTY
property NUMBER,
value NUMBER);
SET_VIEW_PROPERTY
(view_name ViewPort,
property NUMBER,
x NUMBER,
y NUMBER);
Parameters
view_id The unique ID Form Builder assigned the view when you created the
canvas/view. Use the FIND_VIEW built-in to return the ID to an
appropriately typed variable. Datatype is VIEWPORT.
view_name The name you gave the canvas object when you defined it. Datatype is
VARCHAR2.
property Specifies one of the following properties:
DIRECTION The layout direction for bidirectional objects. Valid values
are DIRECTION_DEFAULT, RIGHT_TO_LEFT, LEFT_TO_RIGHT.
DISPLAY_POSITION For a stacked view, the position of the view’s
upper-left corner relative to the window’s content view, as an X, Y pair.
Determines where the view is displayed in the window.
HEIGHT For a stacked canvas, the height of the view. To change the size
of the canvas itself, use SET_CANVAS_PROPERTY.
POSITION_ON_CANVAS An X, Y pair indicating the location of the
view’s upper-left corner relative to its canvas.

428
VIEWPORT_X_POS For a stacked view, the X coordinate for the view’s
upper-left corner relative to the window’s content view.
VIEWPORT_Y_POS For a stacked view, the Y coordinate for the view’s
upper-left corner relative to the window’s content view.
VIEWPORT_X_POS_ON_CANVAS The X coordinate for the view’s
upper-left corner relative to its canvas.
VIEWPORT_Y_POS_ON_CANVAS The Y coordinate for the the
view’s upper-left corner relative to its canvas.
VIEW_SIZE For a stacked canvas, the size of the view, as a width, height
pair. To change the size of the canvas itself, use
SET_CANVAS_PROPERTY.
VISIBLE Whether the view is to be displayed. Valid values are
WIDTH For a stacked canvas, the width of the view. To change the size
of the canvas itself, use SET_CANVAS_PROPERTY.
value Specify the value appropriate to the property you are setting:
PROPERTY_TRUE The property is to be set to the TRUE state.
PROPERTY_FALSE The property is to be set to the FALSE state.
x The NUMBER value of the X coordinate or the width, depending on the
units.
y The NUMBER value of the Y coordinate or the height, depending on the
units.

429
SET_WINDOW_PROPERTY built-in
Description
Sets a property for the indicated window.
Syntax
SET_WINDOW_PROPERTY
(window_id Window,
property NUMBER,
value VARCHAR2);
SET_WINDOW_PROPERTY
(window_id Window,
property NUMBER,
x NUMBER);
SET_WINDOW_PROPERTY
(window_id Window,
property NUMBER,
x NUMBER,
y NUMBER);
SET_WINDOW_PROPERTY
property NUMBER,
value VARCHAR2);
SET_WINDOW_PROPERTY
property NUMBER,
x NUMBER);
SET_WINDOW_PROPERTY
property NUMBER,
x NUMBER,
y NUMBER);
Parameters
property Specify one of the following window properties:
LEFT_TO_RIGHT.

430
Foreground Color.
in the item.
HEIGHT Specifies the height of the window.
HIDE_ON_EXIT Specifies whether Form Builder hides the current
window automatically when the operator navigates to an item in another
window. Valid values are PROPERTY_TRUE and PROPERTY_FALSE.
a window item when the window is minimized.
POSITION Specifies an x, y pair indicating the location for the window
on the screen.
TITLE Sets the title of the window.
VISIBLE Specifies whether the window is to be displayed. Valid values
are PROPERTY_TRUE and PROPERTY_FALSE.
WINDOW_SIZE Specifies a width, height pair indicating the size of the
window on the screen.
WINDOW_STATE Specifies the current display state of the window.
Valid values are NORMAL, MAXIMIZE, or MINIMIZE.
WIDTH Specifies the width of the window.
X_POS Sets the x coordinate for the window’s upper left corner on the
screen.
Y_POS Sets the y coordinate for the window’s upper left corner on the
screen.
described earlier:
state. This applies specifically to the VISIBLE property.

431
FALSE state. This applies specifically to the VISIBLE property.
The following constants can be passed as arguments for use with the
WINDOW_STATE property:
NORMAL Specifies that the window is displayed normally according to
the current Width, Height, X Position, and Y Position property settings.
MAXIMIZE Specifies that the window is enlarged to fill the screen
according to the display style of the window manager.
MINIMIZE Specifies that the window is minimized, or iconified.
x Specifies the NUMBER value of the x coordinate or the width, depending
system units.
y Specifies the NUMBER value of the y coordinate or the height, depending
system units.
Usage Notes
On Microsoft Windows, forms run inside the MDI application window. You can use
SET_WINDOW_PROPERTY to set the following properties of the MDI application window:
• TITLE
• POSITION
• WIDTH, HEIGHT
• WINDOW_SIZE
• WINDOW_STATE
• X_POS, Y_POS
To reference the MDI application window in a call to SET_WINDOW_PROPERTY, use the constant
FORMS_MDI_WINDOW:
Set_Window_Property(FORMS_MDI_WINDOW, POSITION, 5,10)
Set_Window_Property(FORMS_MDI_WINDOW, WINDOW_STATE, MINIMIZE)
SET_WINDOW_PROPERTY restrictions
• If you change the size or position of a window, the change remains in effect for as long as the form
is running, or until you explicitly change the window’s size or position again. Closing the window
and reopening it does not reset the window to its design-time defaults. You must assign the design-
time defaults to variables if you intend to set the window back to those defaults.
SET_WINDOW_PROPERTY examples
/*
** Built-in: SET_WINDOW_PROPERTY
** Example: See FIND_WINDOW
*/

432
SHOW_ALERT built-in
Description
Displays the given alert, and returns a numeric value when the operator selects one of three alert buttons.
Syntax
SHOW_ALERT
(alert_id Alert);
SHOW_ALERT
(alert_name VARCHAR2);
Returns A numeric constant corresponding to the button the operator selected from the alert. Button
mappings are specified in the alert design.
If the operator selects... Form Builder returns
Button 1 ALERT_BUTTON1
Parameters
alert_id The unique ID that Form Builder assigns the alert when the alert is created.
Use the FIND_ALERT built-in to return the ID to an appropriately typed
variable. The data type of the ID is Alert.
alert_name The name you gave the alert when you defined it. The data type of the
name is VARCHAR2.
SHOW_ALERT examples
/*
** Built-in: SHOW_ALERT
** Example: See FIND_ALERT and SET_ALERT_PROPERTY
*/

433
SHOW_EDITOR built-in
Description
Displays the given editor at the given coordinates and passes a string to the editor, or retrieves an
existing string from the editor. If no coordinates are supplied, the editor is displayed in the default
position specified for the editor at design time.
Syntax
SHOW_EDITOR
(editor_id Editor,
message_in VARCHAR2,
message_out VARCHAR2,
result BOOLKAN);
SHOW_EDITOR
(editor_id Editor,
x NUMBER,
y NUMBER,
result BOOLEAN);
SHOW_EDITOR
(editor_name VARCHAR2,
result BOOLEAN);
SHOW_EDITOR
(editor_name VARCHAR2,
x NUMBER,
y NUMBER,
result BOOLEAN);
Built-in Type unrestricted procedure that returns two OUT parameters (result and message_out)
Parameters
editor_id Specifies the unique ID that Form Builder assigns when it creates the
editor. Use the FIND_EDITOR built-in to return the ID to a variable of
the appropriate data type. The data type of the ID is Editor.
editor_name Specifies the name you gave to the editor when you defined it. The data
message_i Specifies a required IN parameter of VARCHAR2 data type. The value
passed to this parameter can be NULL. You can also reference a text item
or variable.
x Specifies the x coordinate of the editor. Supply a whole number for this
argument.
y Specifies the y coordinate of the editor. Supply a whole number for this
argument.

434
message_out Specifies a required OUT parameter of VARCHAR2 data type. You can
also reference a text item or variable. If the operator cancels the editor,
result is FALSE and message_out is NULL.
result Specifies a required OUT parameter of BOOLEAN data type. If the
operator accepts the editor, result is TRUE. If the operator cancels the
editor, result is FALSE and message_out is NULL.
SHOW_EDITOR restrictions
• Message_out should be at least as long as message_in, because the length of the variable or text
item specified for message_out determines the maximum number of characters the editor can accept.
• The message_in parameter values are always converted to VARCHAR2 by Form Builder when
passed to the editor. However, if you are passing message_out to something other than a
VARCHAR2 type object, you must first perform the conversion by passing the value to a variable
and then perform type conversion on that variable with PL/SQL functions TO_DATE or
TO_NUMBER.
• The Width must be at least wide enough to display the buttons at the bottom of the editor window.
SHOW_EDITOR examples
/*
** Built-in: SHOW_EDITOR
** Example: Accept input from the operator in a user-defined
** editor. Use the system editor if the user has
** checked the "System_Editor" menu item under the
** "Preferences" menu in our custom menu module.
*/
DECLARE
ed_id Editor;
mi_id MenuItem;
ed_name VARCHAR2(40);
val VARCHAR2(32000);
ed_ok BOOLEAN;
BEGIN
mi_id := Find_Menu_Item(’PREFERENCES.SYSTEM_EDITOR’);
IF Get_Menu_Item_Property(mi_id,CHECKED) = ’TRUE’ THEN
ed_name := ’system_editor’;
ELSE
ed_name := ’my_editor1’;
END IF;
ed_id := Find_Editor( ed_name );
/*
** Show the appropriate editor at position (10,14) on the
** screen. Pass the contents of the :emp.comments item
** into the editor and reassign the edited contents if
** ’ed_ok’ returns boolean TRUE.
*/
val := :emp.comments;
Show_Editor( ed_id, val, 10,14, val, ed_ok);
IF ed_ok THEN
:emp.comments := val;
END IF;
END;

435
SHOW_KEYS built-in
Description
Displays the Keys screen. When the operator presses a function key, Form Builder redisplays the form
as it was before invoking the SHOW_KEYS built-in.
Syntax
SHOW_KEYS;
Parameters
none
SHOW_KEYS examples
/*
** Built-in: SHOW_KEYS
** Example: Display valid function key bindings
*/
BEGIN
Show_Keys;
END;

436
SHOW_LOV built-in
Description
Displays a list of values (LOV) window at the given coordinates, and returns TRUE if the operator
selects a value from the list, and FALSE if the operator Cancels and dismisses the list.
Syntax
SHOW_LOV
(lov_id LOV);
SHOW_LOV
(lov_id LOV,
x NUMBER,
y NUMBER);
SHOW_LOV
(lov_name VARCHAR2);
SHOW_LOV
(lov_name VARCHAR2,
x NUMBER,
y NUMBER);
Returns BOOLEAN
Parameters
lov_name The name you gave to the LOV when you defined it. The data type of the
name is VARCHAR2.
x Specifies the x coordinate of the LOV.
y Specifies the y coordinate of the LOV.
Usage Notes
When SHOW_LOV is used to display an LOV, Form Builder ignores the LOV’s Automatic Skip
property.
If you want to move the cursor to the next navigable item, use the LIST_VALUES built-in.
SHOW_LOV restrictions
If the lov_name argument is not supplied and there is no LOV associated with the current item, Form
Builder issues an error.
If the record group underlying the LOV contains 0 records, the BOOLEAN return value for
SHOW_LOV will be FALSE.

437
SHOW_LOV examples
/*
** Built-in: SHOW_LOV
** Example: Display a named List of Values (LOV)
*/
DECLARE
a_value_chosen BOOLEAN;
BEGIN
a_value_chosen := Show_Lov(’my_employee_status_lov’);
IF NOT a_value_chosen THEN
Message(’You have not selected a value.’);
Bell;
END IF;
END;

438
SHOW_MENU built-in
Description
Displays the current menu if it is not currently displayed. It does not make the menu active.
Because SHOW_MENU does not make the menu active, Form Builder does not allow the menu to
obscure any part of the current canvas. Therefore, all or part of the menu does not appear on the screen
if the current canvas would cover it.
Syntax
SHOW_MENU;
Parameters
none
SHOW_MENU restrictions
Only for use in character mode environments.
SHOW_MENU examples
/*
** Built-in: SHOW_MENU
** Example: Display the menu if no canvas overlays it.
*/
BEGIN
Show_Menu;
END;

439
SHOW_VIEW built-in
Description
Displays the indicated canvas at the coordinates specified by the canvas’s X Position and Y Position
property settings. If the view is already displayed, SHOW_VIEW raises it in front of any other views in
the same window.
Syntax
SHOW_VIEW
(view_id ViewPort);
SHOW_VIEW
(view_name VARCHAR2);
Parameters
view_name Specifies the name that you gave the view when defining it. The data type
SHOW_VIEW examples
/*
** Built-in: SHOW_VIEW
** Example: Programmatically display a view in the window to
** which it was assigned at design time.
*/
BEGIN
Show_View(’My_Stacked_Overlay’);
END;

440
SHOW_WINDOW built-in
Description
Displays the indicated window at either the optionally included X,Y coordinates, or at the window’s
current X,Y coordinates. If the indicated window is a modal window, SHOW_WINDOW is executed as
a GO_ITEM call to the first navigable item in the modal window.
Syntax
SHOW_WINDOW
(window_id Window);
SHOW_WINDOW
(window_id Window,
x NUMBER,
y NUMBER);
SHOW_WINDOW
SHOW_WINDOW
x NUMBER,
y NUMBER);
Parameters
window_name Specifies the name that you gave the window when defining it. The data
x Specifies the x coordinate of the window. Supply a whole number for this
argument.
y Specifies the y coordinate of the window. Specify this value as a whole
NUMBER.
SHOW_WINDOW examples
/*
** Built-in: SHOW_WINDOW
** Example: Override the default (x,y) coordinates for a
** windows location while showing it.
*/
BEGIN
Show_Window(’online_help’,20,5);
END;

441
SYNCHRONIZE built-in
Description
Synchronizes the terminal screen with the internal state of the form. That is, SYNCHRONIZE updates
the screen display to reflect the information that Form Builder has in its internal representation of the
screen.
Syntax
SYNCHRONIZE;
Parameters
none
SYNCHRONIZE restrictions
SYNCHRONIZE only updates the screen display if both of the following conditions are true:
• Form Builder is at the item level in the forms hierarchy (i.e., SYSTEM.CURRENT_ITEM is not
NULL).
•
SYNCHRONIZE examples
/*
** Built-in: SYNCHRONIZE
** Example: Achieve an odometer effect by updating the
** screen as an items value changes quickly.
** Without synchronize, the screen is typically
** only updated when Form Builder completes all
trigger
** execution and comes back for user input.
*/
BEGIN
FOR j IN 1..1000 LOOP
:control.units_processed := j;
SYNCHRONIZE;
Process_Element(j);
END LOOP;
END;

442
TERMINATE built-in
Description
TERMINATE terminates input in a form or dialog box. This function is equivalent to the operator
pressing [ACCEPT].
Syntax
TERMINATE;
Built-in Type restricted function
Parameters
none
TERMINATE restrictions
Terminate applies only in the Enter Parameter Values dialog.

443
TO_VARIANT built-in
Description
Creates an OLE variant and assigns it a value. There are four versions of the function.
Syntax
FUNCTION TO_VARIANT
(newval NUMBER,
vtype VT_TYPE
...or...
FUNCTION TO_VARIANT
(newval VARCHAR2,
vtype VT_TYPE
...or...
FUNCTION TO_VARIANT
(source_table,
vtype VT_TYPE
arrspec VARCHAR2, persistence BOOLEAN)
...or...
FUNCTION TO_VARIANT
(var OLEVAR,
vtype VT_TYPE
arrspec VARCHAR2, persistence BOOLEAN)
Returns the newly-created OLE variant.
Parameters
newval The value to be given to the newly-created OLE variant.
vtype The OLE VT_TYPE to be given to the newly-created
variant.
default value for the NUMBER version of the function is
VT_R8. For the VARCHAR2 version, the default is
VT_BSTR. For the table version, the default is
determined from the PL/SQL types of the table For the
OLEVAR version, the default is the type of the source
variant.
persistence Controls the persistence of the variant after its creation.
A boolean value of TRUE establishes the variant as
persistent; a value of FALSE establishes the variant as
non-persistent.

444
default value is non-persistent.
source_table An existing PL/SQL table that is used to establish the
bounds and values of the newly-created variant table.
The source table can be of any type.
arrspec Indicates which selected element or elements of a source
table are to be used in the creation of the new variant.
The lower bound always starts at 1. For more
information, see Specifiers for OLE Arrays.
This is an optional parameter. If not specified, the entire
source table or source variant is used.
var An existing OLE variant whose value is to be given to
the new variant. (This source variant may be a table.)
Usage Notes
• This function first creates an empty variant and then gives it a value. It offers a combined version of
the CREATE_VAR and SET_VAR operations.
• This TO_VARIANT function can also be thought of as the inverse version of the VAR_TO_*
function.
• Note that the OLEVAR version of this function differs from the NUMBER, VARCHAR2, and table
versions in that it uses an existing OLE variant as the source, rather than a PL/SQL equivalent value.

445
UNSET_GROUP_SELECTION built-in
Syntax
UNSET_GROUP_SELECTION
row_number NUMBER);
UNSET_GROUP_SELECTION
row_number NUMBER);
Description
Unmarks the specified row in the indicated record group. Use the procedure to unmark rows that have
been programmatically selected by a previous call to SET_GROUP_SELECTION.
Rows are numbered sequentially starting at 1. If you select rows 3, 8, and 12, for example, those rows
are considered by Form Builder to be selections 1, 2, and 3. You can undo any row selections for the
entire group by calling the RESET_GROUP_SELECTION built-in.
Parameters
created. Use the FIND_GROUP built-in to return the ID to a variable.
row_number Specifies the number of the record group row that you want to select. The
value you specify is a NUMBER.
UNSET_GROUP_SELECTION examples
/*
** Built-in: UNSET_GROUP_SELECTION
** Example: Clear all of the even rows as selected in the
** record group whose id is passed-in as a
** parameter.
*/
PROCEDURE Clear_Even_Rows ( rg_id RecordGroup ) IS
BEGIN
FOR j IN 1..Get_Group_Row_Count(rg_id) LOOP
IF MOD(j,2)=0 THEN
Unset_Group_Selection( rg_id, j );
END IF;
END LOOP;
END;

446
UP built-in
Description
Navigates to the instance of the current item in the record with the next lowest sequence number.
Syntax
UP;
Enter Query Mode no
Parameters
none

447
UPDATE_CHART built-in
Description
A data block is updated whenever it is queried or when changes to it are committed. By default, when the
block is updated, any charts based on the data block are automatically updated. You can use the
UPDATE_CHART built-in to explicitly cause a chart item to be updated, even if the data block on
which it is based has not been updated. For example, you may want update the chart to reflect
uncommitted changes in the data block.
Syntax
PROCEDURE UPDATE_CHART
(chart_name VARCHAR2,
param_list_id TOOLS.PARAMLIST
);
(chart_name VARCHAR2,
param_list_name VARCHAR2
);
(chart_id FORMS4C.ITEM,
param_list_id TOOLS.PARAMLIST
);
(chart_id FORMS4C.ITEM,
param_list_name VARCHAR2
);
(chart_id FORMS4C.ITEM
);
(chart_name VARCHAR2
);
Parameters
chart_id Specifies the unique ID of the chart.
chart_name Specifies the unique name of the chart.
param_list_id Specifies the unique ID of the chart parameter list.
param_list_name Specifies the unique name of the chart parameter list.

448
UPDATE_RECORD built-in
Description
When called from an On-Update trigger, initiates the default Form Builder processing for updating a
record in the database during the Post and Commit Transaction process.
This built-in is included primarily for applications that run against a non-ORACLE data source.
Syntax
UPDATE RECORD;
Enter Query Mode no
Parameters
none
UPDATE_RECORD restrictions
Valid only in an On-Update trigger.

449
USER_EXIT built-in
Description
Calls the user exit named in the user_exit_string.
Syntax
USER_EXIT
(user_exit_string VARCHAR2);
USER_EXIT
(user_exit_string VARCHAR2,
error_string VARCHAR2);
Parameters
user_exit_string Specifies the name of the user exit you want to call, including any
parameters.
error_string Specifies a user-defined error message that Form Builder should display if
the user exit fails.
USER_EXIT examples
/*
** Built-in: USER_EXIT
** Example: Invoke a 3GL program by name which has been
** properly linked into your current Form Builder
** executable. The user exit subprogram must parse
** the string argument it is passed to decide what
** functionality to perform.
*/
PROCEDURE Command_Robotic_Arm( cmd_string VARCHAR2 ) IS
BEGIN
/*
** Call a C function ’RobotLnk’ to initialize the
** communication card before sending the robot a message.
*/
User_Exit(’RobotLnk INITIALIZE Unit=6,CmdToFollow=1’);
Message(’Failed to initialize Robot 6’);
END IF;
/*
** Pass the string argument as a command to the robot
*/
User_Exit(’RobotLnk SEND Unit=6,Msg=’||cmd_string );
Message(’Command not understood by Robot 6’);
END IF;
/*
** Close the robot’s communication channel
*/

450
User_Exit(’RobotLnk DEACTIVATE Unit=6’);
Message(’Failed to Deactivate Robot’);
END IF;
/*
** The user exit will deposit a timing code into the item
** called ’CONTROL.ROBOT_STATUS’.
*/
Message(’Command Successfully Completed by Robot 6’||
’ in ’||TO_CHAR(:control.robot_timing)||
’ seconds.’);
END;

451
VALIDATE built-in
Description
VALIDATE forces Form Builder to immediately execute validation processing for the indicated
validation scope.
Syntax
VALIDATE
(validation_scope NUMBER);
Built-in Type:
Parameters
validation scope Specify one of the following scopes:
DEFAULT_SCOPE Perform normal validation for the default scope,
determined by the runtime platform.
Note: If you change the scope via
SET_FORM_PROPERTY(VALIDATION UNIT) and then call
VALIDATE(DEFAULT_SCOPE), you will override the default scope as
defined in the form module. In this case, Form Builder will not validate at
the default scope but at the scope defined by SET_FORM_PROPERTY.
FORM_SCOPE Perform normal validation for the current form.
BLOCK_SCOPE Perform normal validation for the current block.
RECORD_SCOPE Perform normal validation for the current record.
ITEM_SCOPE Perform normal validation for the current item.
Note on runtime behavior
If an invalid field is detected when validation is performed, the cursor does not move to that field.
Instead, the cursor remains in its previous position.
VALIDATE examples
/*
** Built-in: VALIDATE
** Example: Deposits the primary key value, which the user
** has typed, into a global variable, and then
** validates the current block.
*/
BEGIN
IF :Emp.Empno IS NOT NULL THEN
:Global.Employee_Id := :Emp.Empno;
Validate(block_scope);

452
END IF;
Execute_Query;
END IF;
END;

453
VARPTR_TO_VAR built-in
Description
Changes a variant pointer into a simple variant.
Syntax
FUNCTION VARPTR_TO_VAR
(variant OLEVAR, vtype VT_TYPE)
RETURN changed OLEVAR;
Returns the transformed variant.
Parameters
variant The OLE variant pointer to be changed into a variant.
vtype The OLE VT_TYPE to be given to the transformed
variant.
value is VT_VARIANT.
Usage Notes
• This function removes VT_BYREF typing from the variant.
• If the variant’s type was not VT_BYREF, the variant is assumed to hold an address to the type
specified in the vtype, and is de-referenced accordingly.
• If the pointer was NULL or the variant was of type VT_NULL, then VT_EMPTY is returned.

454
VAR_TO_TABLE built-in
Description
Reads an OLE array variant and populates a PL/SQL table from it.
Syntax
PROCEDURE VAR_TO_TABLE
(var OLEVAR,
target_table,
arrspec VARCHAR2);
Parameters
var The OLE variant that is the source array.
target_table The PL/SQL table to be populated.
arrspec Indicates which rows, columns, or elements of the source
array are to be used. See Specifiers for OLE Arrays for
more information.
This is an optional parameter. If not specified, all
elements in the source array are used.
Usage Notes
For similar operations on other data types, use the function VAR_TO_type .

455
VAR_TO_<type> built-in
Description
Reads an OLE variant and transforms its value into an equivalent PL/SQL type.
There are three versions of the function (denoted by the value in type), one for each for of the types
CHAR, NUMBER, and OBJ.
Syntax
FUNCTION VAR_TO_CHAR
(var OLEVAR, arrspec VARCHAR2)
RETURN retval VARCHAR2;
...or...
FUNCTION VAR_TO_NUMBER
RETURN retval NUMBER;
...or...
FUNCTION VAR_TO_OBJ
RETURN retval OLEOBJ;
Returns The variant with its value changed into an equivalent PL/SQL-type. Note that the type of
the return depends on the version of the function chosen.
Parameters
var The OLE variant to be read.
arrspec This parameter is used only if the OLE variant is an array.
It indicates which element of the array is to be read and
returned.
See Specifiers for OLE Arrays for more information.
Usage Notes
• To return a table, use the procedure VAR_TO_TABLE .
• In the VAR_TO_OBJ version of this function, the returned object is local (non-persistent).

456
VAR_TO_VARPTR built-in
Description
Creates an OLE variant that points to an existing variant.
Syntax
FUNCTION VAR_TO_VARPTR
(variant OLEVAR, vtype VT_TYPE)
RETURN newpointer OLEVAR;
Returns the created variant
Parameters
variant The existing OLE variant to be pointed to.
vtype The type to be assigned to the created OLE variant.
Permissible types are VT_BYREF, VT_PTR, and
VT_NULL.
value is VT_BYREF.
Usage Notes
• If the variant to be pointed to is of type VT_EMPTY, then the created pointer will be of type
VT_NULL, regardless of the vtype specification in the function.
• If vtype is specified as VT_BYREF, or defaults to VT_BYREF, then the created pointer will be of
type VT_BYREF plus the source variant’s type.
• If the vtype does not have a VT_BYREF in it, then the created pointer will be of type VT_PTR, and
it will point to the content within the variant.

457
VBX.FIRE_EVENT built-in
Description
Raises an event for the VBX control.
Syntax
VBX.FIRE_EVENT
(item_id ITEM,
event_name VARCHAR2,
VBX.FIRE_EVENT
(item_id ITEM,
VBX.FIRE_EVENT
VBX.FIRE_EVENT
Parameters
variable. The data type of the ID is ITEM.
event_name Specifies the name of a VBX event sent to the VBX control. The data type
of the name is VARCHAR2 string.
paramlist_id Specifies the unique ID Form Builder assigns when a parameter list is
created. The data type of the ID is PARAMLIST.
paramlist_name The name you give the parameter list object when it is defined. The data
type of the name is VARCHAR2 string.
VBX.FIRE_EVENT restrictions
Valid only on Microsoft Windows.
VBX.FIRE_EVENT examples
/*
** Built-in: VBX.FIRE_EVENT
** Example: The VBX.FIRE_EVENT built-in triggers a SpinDown

458
** event for the SpinButton VBX control.
*/
DECLARE
ItemName VARCHAR2(40) := ’SPINBUTTON’;
PL_ID PARAMLIST;
PL_NAME VARCHAR2(20) := ’EName’;
BEGIN
PL_ID := Get_Parameter_List(PL_NAME);
IF id_null(PL_ID) THEN
PL_ID := Create_Parameter_List(PL_NAME);
END IF;
VBX.FIRE_EVENT(ItemName,’SpinDown’,PL_ID);
END;

459
VBX.GET_PROPERTY built-in
Description
Obtains the value of a property from a VBX control.
Syntax
VBX.GET_PROPERTY
(item_id ITEM,
property VARCHAR2);
VBX.GET_PROPERTY
property VARCHAR2);
Returns VARCHAR2
Parameters
property Specifies a property or an element of a property array for a VBX control. A
set of VBX properties exists for any given VBX control. Examples of
VBX properties are Width, Height, and FontSize. The data type of
property is a VARCHAR2 string.
VBX.GET_PROPERTY restrictions
VBX.GET_PROPERTY examples
/*
** Built-in: VBX.GET_PROPERTY
** Example: Uses the VBX.GET_PROPERTY built-in to obtain the
** CURRTAB property of the VBX item named TABCONTROL.
** The property value of CURRTAB is returned to the
** TabNumber variable and is used as input in the
** user-defined Goto_Tab_Page subprogram.
** trigger: When-Custom-Item-Event
*/
DECLARE
TabEvent varchar2(80);
TabNumber char;
BEGIN
TabEvent := :system.custom_item_event;
IF (UPPER(TabEvent) = ’CLICK’) then

460
TabNumber := VBX.Get_Property(’TABCONTROL’,’CurrTab’);
Goto_Tab_Page(TO_NUMBER(TabNumber));
END IF;
END;

461
VBX.GET_VALUE_PROPERTY built-in
Description
Gets the VBX Control Value Property of a VBX control.
Syntax
VBX.GET_VALUE_PROPERTY
(item_id ITEM);
VBX.GET_VALUE_PROPERTY
Returns property
Parameters
VBX.GET_VALUE_PROPERTY restrictions
VBX.GET_VALUE_PROPERTY examples
/*
** Built-in: VBX.GET_VALUE_PROPERTY
** Example: Passes the VBX Control Value to the user-defined
** Verify_Item_Value subprogram. Verify_Item_Value
** ensures the display value is the expected value.
*/
DECLARE
VBX_VAL_PROP VARCHAR2(40);
BEGIN
VBX_VAL_PROP := VBX.Get_Value_Property(ItemName);
Verify_Item_Value(VBX_VAL_PROP);
END;

462
VBX.INVOKE_METHOD built-in
Syntax
VBX.INVOKE_METHOD(item_id, method_name, w, x, y, z);
VBX.INVOKE_METHOD(item_name, method_name, w, x, y, z);
Built-in Type:
Description
Invokes the specified method on the item. If the method takes arguments, they should be specified. The
arguments should be provided in the order that the VBX control expects them. The methods that are
valid for VBX controls and a listing of the arguments they expect can be found in the moduleation that
accompanies the VBX control.
Parameters
method_name Specifies the name of the method to invoke. The data type of the name is
VARCHAR2 string.
w, x, y, z Specifies optional arguments that might be required for VBX controls. The
data type of the arguments is VARCHAR2 string.
VBX.INVOKE_METHOD restrictions
VBX.INVOKE_METHOD examples
/*
** Built-in: VBX.INVOKE_METHOD_PROPERTY
** Example: Adds an entry to a combobox. The entry to
** add to the combobox is first optional argument.
** The position where the entry appears is the second
** optional argument.
*/
DECLARE
ItemName VARCHAR2(40) := ’COMBOBOX’;
BEGIN
VBX.Invoke_Method(ItemName,’ADDITEM’,’blue’,’2’);
END;

463
VBX.SET_PROPERTY built-in
Description
Sets the specified property for a VBX control.
Syntax
VBX.SET_PROPERTY
(item_id ITEM,
property VARCHAR2,
value VARCHAR2);
VBX.SET_PROPERTY
property VARCHAR2,
value VARCHAR2);
Built-in Type:
Parameters
property Specifies a property or an element of a property array for a VBX control. A
value Specifies the value to be applied to the VBX property. The data type of
value is a VARCHAR2 string.
VBX.SET_PROPERTY restrictions
VBX.SET_PROPERTY examples
/*
** Built-in: VBX.SET_PROPERTY
** Example: Uses the VBX.SET_PROPERTY built-in to set the
Index
** property of the SpinButton VBX control.
*/
DECLARE

464
VBX_VAL VARCHAR2(40);
BEGIN
IF :System.Custom_Item_Event = ’SpinDown’ THEN
VBX_VAL_PROP := ’Index’;
VBX_VAL := ’5’;
VBX.Set_Property(ItemName,VBX_VAL_PROP,VBX_VAL);
END IF;
END;

465
VBX.SET_VALUE_PROPERTY built-in
Description
Sets the VBX Control Value Property of a VBX control.
Syntax
VBX.SET_VALUE_PROPERTY
(item_id ITEM,
property VARCHAR2);
VBX.SET_VALUE_PROPERTY
property VARCHAR2);
Parameters
property Specifies a property for the Form Builder VBX Control Value Property. A
VBX.SET_VALUE_PROPERTY restrictions
VBX.SET_VALUE_PROPERTY examples
/*
** Built-in: VBX.SET_VALUE_PROPERTY
** Example: Uses VBX.SET_VALUE_PROPERTY built-in to set the
** VBX Control Value property.
*/
DECLARE
BEGIN
IF :System.Custom_Item_Event = ’SpinDown’ THEN
VBX_VAL_PROP := ’Index’;
VBX.Set_Value_Property(ItemName,VBX_VAL_PROP);
END IF;
END;

466
WEB.SHOW_DOCUMENT built-in
Syntax:
SHOW_DOCUMENT(url, target);
Built-in Type: unrestricted procedure
Enter Query Mode: yes
Description:
Specifies the URL and target window of a Web application.
Parameters:
url Datatype is VARCHAR2. Specifies the Uniform Resource Locator of the
document to be loaded.
target Datatype is VARCHAR2. Specifies one of the following targets:
_SELF Causes the document to load into the same frame or window as the
source document.
_PARENT Causes the target document to load into the parent window or
frameset containing the hypertext reference. If the reference is in a window
or top-level frame, it is equivalent to the target _self.
_TOP Causes the document to load into the window containing the
hypertext link, replacing any frames currently displayed in the window.
_BLANK Causes the document to load into a new, unnamed top-level
window.
Restrictions:
Can only be used from within a form run from the Web.
Example:
/*
** Built-in: WEB.SHOW_DOCUMENT
** Example: Display the specified URL in the target window.
*/
BEGIN
Web.Show_Document(‘http://www.abc.com’, ‘_self’);
END;

467
WHERE_DISPLAY built-in
Description
Toggles the Where menu navigation option on and off. In a full-screen menu, the Where option displays
information about the operator’s current location in the menu hierarchy.
Syntax
WHERE_DISPLAY;
Built-in Type:
Parameters
none
WHERE_DISPLAY restrictions
WHERE_DISPLAY is valid only in a full-screen menu.

468
WRITE_IMAGE_FILE built-in
Description
Writes the image from a Form Builder image item into the specified file.
Syntax
WRITE_IMAGE_FILE
file_type VARCHAR2,
item_id ITEM,
compression_quality NUMBER,
image_depth NUMBER);
WRITE_IMAGE_FILE
file_type VARCHAR2,
item_name VARCHAR2,
compression_quality NUMBER,
image_depth NUMBER);
Parameters
file_name The name of the file where the image is stored. The file name must adhere
to your operating system requirements.
file_type The file type of the image: BMP, CALS, GIF, JFIF, JPEG, PICT, RAS,
TIFF, or TPIC. The parameter takes a VARCHAR2 argument.
item_id The unique ID Form Builder assigned to the image item when you created
it. Use the FIND_ITEM built-in to return the ID to an appropriately typed
variable. Datatype is ITEM.
item_name The name you gave the image item when you defined it. Datatype is
VARCHAR2.
compression_quality The degree of compression Form Builder will apply to the image when it
stores it to the file (optional). Datatype is VARCHAR2. Valid values
are:NO_COMPRESSION, MINIMIZE_COMPRESSION,
LOW_COMPRESSION, MEDIUM_COMPRESSION,
HIGH_COMPRESSION, MAXIMIZE_COMPRESSION
image_depth The degree of depth Form Builder will apply to the image when it stores it
to the file (optional). Datatype is VARCHAR2. Valid values
are:ORIGINAL_DEPTH, MONOCHROME, GRAYSCALE, LUT
(Lookup Table), RGB (Red, Green, Blue)
WRITE_IMAGE_FILE restrictions
• The indicated file type must be compatible with the actual file type of the image.
• As with any file, if you write the image to an existing file, you overwrite the contents of that file

469
with the contents of the image item.
• Though you can read PCD and PCX files from the filesystem or the database, you cannot write
image files to the filesystem in PCD or PCX format (using WRITE_IMAGE_FILE). (If you use a
restricted file type when writing images to the filesystem, Form Builder defaults the image file to
TIFF format.)
• Writing a JPEG file from a Form Builder image item will result in loss of resolution.
WRITE_IMAGE_FILE examples
/* Built-in: WRITE_IMAGE_FILE
**
** Save the contents of an image item out to a file
** on the filesystem in a supported image format.
*/
BEGIN
WRITE_IMAGE_FILE(’output.tif’,
’TIFF’,
’emp.photo_image_data’,
maximize_compression,
original_depth);
END;

470
WRITE_SOUND_FILE built-in
Description
Writes sound data from the specified sound item to the specified file.
Syntax
WRITE_SOUND_FILE(file_name VARCHAR2,
file_type VARCHAR2,
item_id ITEM,
compression NUMBER,
sound_quality NUMBER,
channels NUMBER);
WRITE_SOUND_FILE(file_name VARCHAR2,
file_type VARCHAR2,
item_name VARCHAR2,
compression NUMBER,
sound_quality NUMBER,
channels NUMBER);
Built-in Type unrestricted
Enter Query Mode Yes
Parameters:
file_name The fully-qualified file name of the file to which you wish to write sound
data.
file_type The file type for the sound data file. Valid values are: AU, AIFF, AIFF-C,
and WAVE. Note: File type is optional, but should be specified if known
for increased performance. If omitted, Form Builder applies a default file
type: WAVE (Microsoft Windows), AIFF-C (Macintosh), or AU (all
others).
compressioWhether the sound data should be compressed before Form Builder writes the data to the file.
Possible values are COMPRESSION_ON, COMPRESSION_OFF, and
ORIGINAL_SETTING (retain the default compression setting of the data).
Compression is optional: the default value, if omitted, is
ORIGINAL_SETTING.
sound_quality The quality of data sampling rate and depth for the sound data. Possible
values are: HIGHEST_SOUND_QUALITY, HIGH_SOUND_QUALITY,
MEDIUM_SOUND_QUALITY, LOW_SOUND_QUALITY,
LOWEST_SOUND_QUALITY, and ORIGINAL_QUALITY. Sound
quality is optional: the default value, if omitted, is
ORIGINAL_QUALITY.
channels Whether Form Builder should write the sound data to the file as
monophonic or stereophonic. Valid values are MONOPHONIC,
STEREOPHONIC, and ORIGINAL_SETTING (retain the default channel

471
setting of the data). Channels is optional: the default value, if omitted, is
ORIGINAL_SETTING.
WRITE_SOUND_FILE restrictions
• To use the PLAY_SOUND, READ_SOUND_FILE and WRITE_SOUND_FILE built-ins to play
and/or record sound data in a file, you must create a sound item and place focus in that item before
the call to the built-ins are executed. Although the sound item will be represented by the sound item
control at design-time, the control will not function for end users at runtime. Therefore, you must
"hide" the sound item behind another object on the canvas so users will not see the control at
runtime. (To place focus in an item, it cannot be assigned to a null canvas or have its Displayed
property set to No.) For example, to call the READ_SOUND_FILE and PLAY_SOUND built-ins
from a When-Button-Pressed trigger, place focus in the "hidden" sound item by including a call to
the built-in procedure GO_ITEM in the trigger code prior to calling READ_SOUND_FILE and
PLAY_SOUND.

472
Options
About Form Builder Components
Form Builder consists of the following programs, or components, which you can execute independently
from the command line or by clicking on an icon:
Form Builder Form Builder is the design component you use to create,
compile, and run Form Builder applications. Using Form
Builder, you can create three types of modules: forms, menus,
and libraries.
Forms Runtime Form operators use Forms Runtime to run the completed
application. As an application designer, you can also use
Forms Runtime to test and debug forms during the design
stage. Forms Runtime reads the machine-readable file created
by the Form Compiler, and executes the form.
Web Previewer Application developers use the Web Previewer to test forms
locally as though they were being run from Forms Server in a
browser or in the Appletviewer. Like Forms Runtime, the
Web Previewer reads the machine-readable file created by the
Form Compiler, and executes the form.
Form Compiler Most often, you use the Form Compiler to create a machine-
readable file that Forms Runtime can execute.
Form Compiler also allows you to convert various
representations of a form. Using Form Compiler, you can:
Convert files between binary, text, and database module
storage formats.
Insert module definitions into database tables.
Delete module definitions from the database.
Recompile application modules when porting to different
platforms.
Upgrade applications created with previous versions of
Form Builder, SQL*Forms, and SQL*Menu.

473
Starting Form Builder Components
Some platforms support icons, and some support command lines. You can start the Form Builder, Form
Compiler, Web Previewer, or Forms Runtime components in one of two ways, depending on your
computer platform:
icon You will see a different icon for each component:
Form Builder, Forms Runtime, and Forms Compiler.
To launch a component, double-click it.
command line When you start a component by entering a command
on the command line, you can indicate the options you
want to use for this session by entering keyword
parameters on the command line.
For more information on starting Form Builder components, refer to the Form Builder documentation for
your operating system.

474
Starting Form Builder Components from the Command
Line
To start any Form Builder component from the command line, enter this statement at the system prompt:
component_name [module_name] [userid/password] [parameters]
where:
component_name Specifies the Form Builder component you want to
use:
• Form Builder - ifbld60
• Forms Runtime - ifrun60
• Web Previewer - ifweb60
• Form Compiler - ifcmp60
Starting Form Builder Components examples
ifrun60 Starts the Forms Runtime component on Microsoft Windows,
with no calls to the user exit interface.
To indicate that foreign functions accessible through the user
exit interface have been linked into the executable, add an x to
component_name.
For more information on valid component names, refer to the Form Builder
documentation for your operating system.
module_name Specifies the module you want to load: a form,
menu, or library name. If you omit the module name, Form
Builder displays a dialog allowing you to choose the module to
open.
userid/password Specifies your ORACLE username and password.
parameters Specifies any optional command line parameters you
want to activate for this session. Optional parameters are
entered in this format:keyword1=value1 keyword2=value2...
ifrun60 custform scott/tiger statistics=yes
Note: The examples assume that you’re running Form Builder on Microsoft Windows, with no calls to
the user exit interface, so the Forms Runtime component name is shown as "ifrun60." You should
substitute the correct value of component_name for your platform and application.
Keyword Usage
There are three categories of parameters in Form Builder:
• MODULE and USERID
• options (command line parameters for setting options)
• form parameters
The first two parameters, MODULE and USERID, are unique because you can use either positional or
keyword notation to enter them. Use keyword notation to enter optional parameters, on the command

475
line. (Many optional parameters can also be set using dialogs.) Form parameters are optional input
variables that are defined at design time for a specific form.
MODULE and USERID
If you enter the first two parameters, MODULE and USERID, in the specified order, you may omit the
keywords and enter only values, as shown in the following example:
ifrun60 custform scott/tiger
Invalid Example:
ifrun60 scott/tiger
This sequence is invalid because the value for username/password is out of sequence, so it must be
preceded by the USERID keyword. To use positional notation instead of keywords would require
inserting the value of the MODULE parameter immediately after the component name, as in the previous
example.
Valid Examples:
ifrun60 module=custform userid=scott/tiger
ifrun60 userid=scott/tiger
ifrun60
If you indicate only the module name, Form Builder will prompt you for module name and
username/password.
Options
Use keyword notation for setting options on the command line. For information on options, see:
• Setting Forms Runtime Options
• Setting Form Compiler Options
• Setting Form Builder Options
The following syntax rules apply to all keyword parameters, including options and form parameters:
• No spaces should be placed before or after the equal sign of an argument.
• Separate arguments with one or more spaces; do not use commas to separate arguments.
Invalid Example:
ifrun60 custform scott/tiger statistics = yes
ifrun60 custform scott/tiger statistics=yes,debug=yes
Valid Examples:
ifrun60 custform scott/tiger statistics=yes
ifrun60 custform scott/tiger statistics=yes debug=yes
Form Parameters
Form parameters are variables that you define at design time. Form parameters provide a simple
mechanism for defining and setting the value of inputs that are required by a form at startup. Operators
can specify values for form parameters by entering them on the command line using standard command
line syntax.

476
The default value for a form parameter is taken from the Default Value field of the Properties window.
The operator can override the default value when starting Forms Runtime by specifying a new value for
the form parameter on the command line.
In the following example, myname_param is a user-defined form parameter that was defined in Form
Builder.
Note: If a form parameter value includes a space or punctuation, enclose the value in double quotes.
Example
ifrun60 empform scott/tiger myname_param="Msr. Dubois"
Displaying Hint Text on Command Line Options
To receive help on syntax and parameters, type the component name followed by "help=yes" at the
system prompt.
Example
ifrun60 help=yes

477
Logging on to the Database
To explicitly log on to the database, use the USERID command line keyword or, in Form Builder,
choose File->Connect.
USERID
USERID is your ORACLE username and password with an optional SQL*Net connect string. The
maximum length for the connect string is 255 characters.
To log on, use one of the following forms:
username/password
username/password@node
Expired password
The Oracle8 database server offers a password expiration feature that database administrators can
employ to force users to update their password on a regular basis.
If your password has expired, Forms will offer you an opportunity to enter a new password when you log
on. (You can also use the Forms startup dialog box to change your password before it expires.)
Logging on to the Database examples
You might specify the following command to run the ORDER_ENTRY form on the default database of
the LONDON node:
ifrun60 order_entry scott/tiger@D:london
For information on SQL*Net, refer to the SQL*Net User’s Guide. For help with your ORACLE
username, see your Database Administrator.

478
Forms Runtime Options
Forms Runtime options specify Form Builder default behavior during a Forms Runtime session. You can
set Forms Runtime options in two ways:
• Set options in the Forms Runtime Options dialog box.
• Pass parameters to Form Builder on the command line when you invoke Forms Runtime.
In addition, you can set Forms Runtime options to specify the defaults for forms you run from Form
Builder in the Preferences dialog box. To display the Preferences dialog box, choose Tools
Preferences.
Note: Forms Runtime preferences set in Form Builder apply only to forms run from within Form
Builder.
Options may also be set for the Web Previewer in the serverargs parameter of a base HTML file. You
can specify this HTML filename in the Runtime tab of the Preferences dialog box, or on the command
line.
The following chart lists the Forms Runtime options from the Options window and their corresponding
keyword parameters.
If you enter these keyword parameters as command line options, you can enter more than one at a time,
in any order:
ifrun60 module=myform userid=scott/tiger debug=YES
statistics=YES
Option Name Keyword Parameter Default
Oracle terminal resource file Term
Run in debug mode Debug No
Debug messages Debug_Messages * No
Write input keystrokes to file Keyout
Read input keystrokes from file Keyin
Write output to file Output_File
Write output to display Interactive Yes
Array processing Array Yes
Buffer records to temporary file Buffer_Records No
Display screen to specify logon Logon_Screen No
Display block menu on startup Block_Menu No
Optimize V2-style trigger step SQL
processing
OptimizeSQL Yes
Optimize transaction mode processing OptimizeTP Yes

479
Run in quiet mode Quiet No
Show statistics Statistics No
Run in query only mode Query_Only No
Show help information Help No
Window state Window_State NORMAL
Collect PECS data? PECS OFF
Options screen Options_Screen * No
Use SDI mode USESDI No
Path for HTML file (Web Runtime only) HTML
* Use from command line only; not available from the Forms RuntimeOptions dialog box.

480
Array (Forms Runtime)
Description
Use array processing during a Forms Runtime session.
When you suppress array processing, Forms requests that the database only returns a single row of query
results at a time from server to client. Similarly, Forms requests that the database only send a single row
at a time from the client to the server for an INSERT, UPDATE, or DELETE when array processing is
suppressed.
Suppressing array processing usually results in the first retrieved record displaying faster than it would if
you fetched a number of records with array processing. However, the total time required to fetch and
display a number of records is shorter with array processing because network overhead can be reduced.
Option Name Array Processing
Default YES
Array (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger array=NO

481
Block_Menu (Forms Runtime)
Description
Automatically displays the block menu as the first screen (after the login screen, if it displays) instead of
the form.
Preference Name Display Block Menu
Default NO
Block_Menu (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger block_menu=YES

482
Buffer_Records (Forms Runtime)
Description
Sets the number of records buffered in memory to the minimum allowable number of rows displayed plus
3 (for each block). If a block retrieves any records by a query beyond this minimum, Form Builder
buffers these additional records to a temporary file on disk.
Setting this option saves Forms Runtime memory, but may slow down processing because of disk I/O.
Buffer_Records=NO tells Form Builder to set the minimum to the number specified using the Buffered
property from each block.
Option Name Buffer Records to Temporary File
Default NO
Buffer_Records (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger buffer_records=YES

483
Debug (Forms Runtime)
Description
Invokes the debug mode for the Forms Runtime session. Debug mode invokes break processing if the
BREAK built-in is used in any trigger or if you use the Help->Debug command from the Form Builder
menu.
To invoke debug mode on non-Windows platforms, you must use the debug runform executable:
ifdbg60 module=myform userid=scott/tiger debug=YES
Option Name Run in Debug Mode
Default NO
Debug (Forms Runtime) examples
ifdbg60 module=myform userid=scott/tiger debug=YES

484
Debug_Messages (Forms Runtime)
Description
Debug_Messages displays ongoing messages about trigger execution while the form runs.
Default NO
Debug_Messages (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger debug_messages=YES

485
Help (Forms Runtime)
Description
Invokes the Form Builder help screen.
Option Name Show Help Information
Default NO
Help (Forms Runtime) examples
ifrun60 help=YES

486
Interactive (Forms Runtime)
Description
Interactive specifies that, when you are using a keyscript file as input, Form Builder will display the
output on the terminal screen (i.e., run interactively) as well as print the output to a file. Use
Interactive=NO to suppress screen output when running forms in batch mode.
This parameter applies to character-mode terminals only.
Note: You must use the Keyin and Output_File parameters whenever you use Interactive. The Keyin file
specifies the input, or keyscript, file; Output_File specifies the output, or display log, file.
Option Name Write Output to Display
Default YES
Interactive (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger keyin=myfile.key
output_file=mydisplay.out interactive=NO

487
Keyin (Forms Runtime)
Description
Allows you to read a keyscript file into a form as input. The keyscript file starts, executes, and ends the
Forms Runtime session.
The file name specified is the input, or keyscript, file.
By default, Form Builder performs all actions on the terminal screen. If you want to suppress screen
output, specify Interactive=NO and use Output_File to specify the output file.
Option Name Read Input Keystrokes from File
Keyin (Forms Runtime) examples

488
Keyout (Forms Runtime)
Description
Captures in a keyscript file the keystrokes involved during the Forms Runtime session. The keyscript file
includes the keystrokes involved in navigating within a form, invoking functions, and performing
transactions.
The file name specifies the output, or keyscript, file.
Option Name Write Input Keystrokes to File
Keyout (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger keyout=newfile.key

489
Logon_Screen (Forms Runtime)
Description
Forces the logon screen to display if you have not entered the password. Do not specify a username and
password when you use Logon_Screen (Form Builder will ignore it if you do).
Use Logon_Screen when you do not want to type your password on the command line (where it is
visible).
Option Name Display Screen to Specify Logon
Default NO
Logon_Screen (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger logon_screen=YES

490
Optimize SQL Processing (Forms Runtime)
Description
Specifies that Form Builder is to optimize SQL statement processing in V2-style triggers by sharing
database cursors.
By default, Form Builder assigns a separate database cursor for each SQL statement that a form executes
explicitly in a V2 trigger. This behavior enhances processing because the statements in each cursor need
to be parsed only the first time they are executed in a Forms Runtime session¾not every time.
When you specify OptimizeSQL=NO, Form Builder assigns a single cursor for all SQL statements in V2
triggers. These statements share, or reuse, that cursor. This behavior saves memory, but slows
processing because the SQL statements must be parsed every time they are executed.
You can fine-tune this behavior through the New Cursor Area trigger step characteristic. If a trigger step
that contains a SQL statement has this characteristic turned on, Form Builder assigns a separate cursor to
the statement, in effect overriding the OptimizeSQL parameter for that statement.
Note: OptimizeSQL has no effect on statements in PL/SQL triggers.
Option Name Optimize V2-Style trigger Step SQL Processing
optimizesql
Default YES
Optimize SQL Processing (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger optimizesql=NO

491
Optimize Transaction Mode Processing (Forms Runtime)
Description
Optimizes transaction mode processing.
By default, Form Builder assigns a separate database cursor for each SQL statement that a form executes
implicitly as part of posting or querying data. This behavior enhances processing because the statements
in each cursor are parsed only the first time they are executed in a Forms Runtime session, not every
time.
Note that the cursors that are assigned to query SELECT statements must be parsed every time they are
executed. This exception exists because queries can vary from execution to execution.
When you specify OptimizeTP=NO, Form Builder assigns a separate cursor only for each query
SELECT statement. All other implicit SQL statements share, or reuse, cursors. This behavior saves
memory but slows processing because all INSERT, UPDATE, DELETE, and SELECT FOR UPDATE
statements must be parsed every time they are executed.
Option Name Optimize Transaction Mode Processing optimizetp
Default YES
Optimize Transaction Mode Processing (Forms Runtime) restrictions
The OptimizeTP parameter has no effect if you replace standard Form Builder processing with On-
Insert, On-Update, and On-Delete triggers because these triggers replace the implicit issuance of
INSERT, UPDATE, and DELETE statements.
Optimize Transaction Mode Processing (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger optimizetp=NO

492
Options_Screen (Forms Runtime)
Description
Displays the Options window.
This parameter applies on GUI displays only.
Default NO
Options_Screen (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger options_screen=YES

493
Output_File (Forms Runtime)
Description
Captures the terminal output for a form in a display log file, as well as displaying it on the screen. If you
want to suppress screen output, use Interactive=NO and then specify an Output_File.
Note: You must use the Keyin parameter whenever you use Output_File. The Keyin file specifies the
input, or keyscript, file; Output_File specifies the output, or display log, file.
Option Name Write Output to File
Output_File (Forms Runtime) examples
output_file=mydisplay.out

494
PECS (Forms Runtime)
Description
Runs a form with Performance Event Collection Services (PECS) enabled.
PECS is a performance measurement tool you can use to perform the following tasks:
• Measure resource usage (CPU time per event or transactions processed per hour) of Form Builder or
application-specific events
• Locate performance problems (elapsed time per event)
• Measure object coverage (whether a specific object, such as a trigger, alert, or window, is visited
during test execution)
• Measure line-by-line coverage (for PL/SQL code in triggers and procedures)
The PECS option can be set to ON, OFF, or FULL:
For object coverage, set PECS=ON
• For object coverage and line coverage:
Compile with Debug=ON
Run with PECS=FULL
The default is PECS=OFF
To use PECS on non-Windows platforms, you must use the debug runform executable:
ifdbg60 module=myform userid=scott/tiger PECS=ON
Default: OFF
PECS (Forms Runtime) examples
ifdbg60 module=myform userid=scott/tiger PECS=ON

495
Query_Only (Forms Runtime)
Description
Invokes the form in query-only mode. Setting this option to On is equivalent to using the
CALL_FORM(query_only) built-in.
Preference Name Query Only Mode
Default NO
Query_Only (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger query_only=YES

496
Quiet (Forms Runtime)
Description
Invokes the quiet mode for the Forms Runtime session. In quiet mode, messages do not produce an
audible beep. You can explicitly ring the bell from a trigger by way of a call to the BELL built-in. The
default of quiet=NO means that the bell rings. To turn off the bell, set quiet=YES.
Option Name Run in Quiet Mode
Default NO
Quiet (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger quiet=YES

497
Statistics (Forms Runtime)
Description
Displays a message at the end of the session that states the maximum number of simultaneous cursors
that were used during the session. This message appears on the terminal screen, not on the message line.
This option also issues the following command to the database:
ALTER SESSION SET SQL_TRACE TRUE
This command enables the SQL trace facility for the current session, displaying the trace file directory on
the server. For more information on this facility¾which gathers database performance information¾refer
to the Oracle RDBMS Performance Tuning Guide.
If you are running a form within Form Builder and you want to use this feature, activate the Statistics
Forms Runtime option.
Option Name Show Statistics
Default NO
Statistics (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger statistics=YES

498
Term (Forms Runtime)
Description
Specifies a mapping other than the default mapping for the current device and product:
resfile The file name specified is the name of your Oracle
Terminal resource file. If you do not specify resfile, Form
Builder defaults to a file name that is platform-specific, but
begins with "FMR" on most platforms. For example, the Microsoft
Windows default file is FMRUSW.
resfile The file name specified is the name of your Oracle Terminal resource file.
If you do not specify resfile, Form Builder defaults to a file name that is
platform-specific, but begins with “FMR” on most platforms. For example,
the Microsoft Windows default file is FMRUSW.
mymapping The mapping name specified is the mapping you want to use for this Form
Builder session.
Note: You or the DBA define mappings with Oracle Terminal. For more information on resource files,
refer to the Form Builder documentation for your operating system.
When running forms on the web use only the resfile argument to specify the full path of the resource file
to be used.
Option Name Oracle Terminal Resource File
Term (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger@<alias>
term=resfile:mymapping
When running a form on the web use:
serverargs="myform.fmx scott/tiger@<alias>
term=c:formdirresfile.res"

499
Window_State (Forms Runtime)
Description
Sets the size of the MDI application window at the beginning of Forms Runtime.
When set to MAXIMIZE, the MDI application window is maximized at the beginning of a Forms
Runtime session. When set to MINIMIZE, the MDI application window is minimized at the beginning
of a Forms Runtime session. The NORMAL setting starts up an MDI application window that is normal
size.
Option Name Window State
Default NORMAL
Window_State (Forms Runtime) restrictions
Valid only on Microsoft Windows. Not supported for forms running from the web.
Window_State (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger window_state=MAXIMIZE

500
Setting Form Compiler Options
Form Compiler options specify Form Builder default behavior during a Form Compiler session. Some of
these options apply to file generation during development, for running and testing forms; other options
apply only when you are converting files from earlier versions to Version 6.0.
You can set Form Compiler options in two ways:
• Set options in the "Form Compiler Options" dialog box.
• Pass parameters to Form Builder on the command line when you invoke Form Compiler.
The following chart lists the Form Compiler options from the "Form Compiler Options" window and
their corresponding keyword parameters. For information on a specific Form Compiler option, see the
corresponding parameter in the alphabetical list that follows the chart.
In the alphabetical list of Form Compiler parameters, the following information is shown for each
parameter:
• example, showing the parameter set to a value other than its default
• relevant module type: Form, Menu, Library, or All
• description
• default
If you enter these keyword parameters as command line options, you can enter more than one at a time,
in any order:
ifcmp60 module=myform userid=scott/tiger batch=YES
statistics=YES
Option Name Keyword Parameter
File Module
Userid/Password Userid
Module type is Form, Menu, or Library Module_Type
Module access is File or Database Module_Access
Compile in Debug mode Debug
Show statistics Statistics
Logon to the database Logon
Write output to file Output_File
Write script file Script
Delete module from database Delete
Insert module into database Insert
Extract module from database into file Extract

501
Upgrade 3.0 Form or 5.0 Menu to 4.5 Module Upgrade
Upgrade SQL*Menu 5.0 table privileges Upgrade_Roles
Version to upgrade Version
CRT file to use when upgrading CRT_File
Compile a runform/runmenu file when upgrading Build
Add key-up and down triggers when upgrading Add_Triggers
Add NOFAIL to exemacro steps when upgrading Nofail
Show help information Help
Options_Screen Options_Screen*
Batch Batch*
*Use from command line only; not available from the Form Compiler Options dialog.

502
Add_Triggers (Form Compiler)
Description
Indicates whether to add key-up and key-down triggers when upgrading from Forms 2.0 or 2.3 to 4.0
wherever KEY-PRVREC and KEY-NXTREC triggers existed.
Module: Form
Default NO
Add_Triggers (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger upgrade=yes version=23
add_triggers=YES

503
Batch (Form Compiler)
Description
Suppresses interactive messages; use when performing a batch generation.
Module: Form
Default NO
Batch (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger batch=YES

504
Build (Form Compiler)
Description
Use the Build option in conjunction with Upgrade. Form Builder creates two files when you specify
upgrade=YES and omit build, thus accepting the default of build=YES:
• an upgraded binary design module (.FMB or .MMB file)
• an upgraded Forms Runtime executable module (.FMX or .MMX file)
If you do not want to automatically create the Forms Runtime module, specify build=NO.
Module: Form, Menu
Default YES
Build (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger upgrade=YES build=NO

505
Compile_All (Form Compiler)
Description
Compiles the program units within the specified module.
Note: The output file will be placed in the current directory unless you specify a different location using
Output_File.
Module: Form, Menu, Library
Default NO
Compile_All (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger compile_all=YES

506
CRT_File (Form Compiler)
Description
Indicates CRT file to use when upgrading from SQL*Forms Version 2.0 or 2.3.
Module: Form
CRT_File (Form Compiler) examples
crt_file=myfile.crt

507
Debug (Form Compiler)
Description
Creates a debug-capable form.
The debug Form Compiler option creates entries in your .FMX file used by the runtime source-level
debugger, so set debug=yes for Form Compiler whenever you plan to set debug=yes for runtime.
Option Name Compile in Debug Mode
Default NO
Debug (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger debug=yes

508
Delete (Form Compiler)
Description
Deletes the module directly from the database.
Module: All
Default NO
Delete (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger delete=YES

509
Extract (Form Compiler)
Description
Extracts the module from the database into a file with the same module name.
Module: All
Default NO
Extract (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger extract=YES

510
Help (Form Compiler)
Description
Module: All
Default NO
Help (Form Compiler) examples
ifcmp60 help=YES

511
Insert (Form Compiler)
Description
Inserts a module directly into the database from the Form Compiler command line.
Module: All
Default NO
Usage Notes
The Insert option does not work in combination with the Upgrade option.
Insert (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger insert=YES

512
Logon (Form Compiler)
Description
Specifies whether Form Compiler should log on to the database. If the module contains any PL/SQL
code with table references, a connection will be required for generation.
Module: Form
Default YES
Logon (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger logon=NO

513
Module_Access (Form Compiler)
Description
Specifies whether you want to open and save modules to the file system or to the database.
Module: All
Default FILE
Module_Access (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger module_access=database

514
Module_Type (Form Compiler)
Description
Specifies module type for current module. By specifying Module_Type, you can have form, menu and
library modules with the same name.
Module: All
Default FORM
Module_Type (Form Compiler) examples
ifcmp60 module=orders userid=scott/tiger module_type=menu

515
Nofail (Form Compiler)
Description
Indicates whether to add the NOFAIL keyword to exemacro steps when upgrading from Forms 2.0 only.
Module: Form
Default NO
Nofail (Form Compiler) examples
nofail=YES

516
Options_Screen (Form Compiler)
Description
Invokes the Options window.
This parameter applies to GUI displays only.
Module: All
Default NO
Options_Screen (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger options_screen=YES

517
Output_File (Form Compiler)
Description
Specifies the file name for the generated file.
When used with upgrade=yes, output_file specifies:
• the complete name of the upgraded binary design module(.FMB,.MMB, or .PLL file)
Note: To specify the name of the generated library file, you must use Strip_Source in conjunction with
Output_File.
• the root name (without extension) of the upgraded Forms Runtime executable module (.FMX or
.MMX file)
When used with upgrade=yes and build=no, the file extension is ignored.
Module: All
Output_File (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger upgrade=yes
output_file=myform.fmb

518
Parse (Form Compiler)
Description
Converts the text file format of a module (.FMT, .MMT, .PLD) to a binary format (.FMB, .MMB, .PLL).
This operation can also be done from within Form Builder by using the Convert command.
Module: All
Default NO
Parse (Form Compiler) examples
ifcmp60 module=myform parse=YES

519
Script (Form Compiler)
Description
Converts a binary file format (.FMB, .MMB, or .PLL) to a text format (.FMT, .MMT, or .PLD).
This operation can also be done within Form Builder by using the Convert command.
Module: All
Default NO
Script (Form Compiler) examples
ifcmp60 module=myform script=YES

520
Statistics (Form Compiler)
Description
Displays a message at the end of the session listing the number of various objects in the compiled form:
• Object Statistics: The number of alerts, editors, lists of values, procedures, record groups, canvases,
visual attributes, windows, and total number of objects.
• trigger Statistics: The number of form triggers, block triggers, item triggers, and total number of
triggers.
• Block Statistics: The number of blocks with Array Fetch ON, the average array fetch size, and the
total number of blocks.
• Item Statistics: The number of buttons, check boxes, display items, image items, list items, radio
groups, text items, user areas, and total number of items.
Module: Form
Default NO
Statistics (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger statistics=YES

521
Strip_Source (Form Compiler)
Description
Removes the source code from the library file and generates a library file that only contains pcode. The
resulting file can be used for final deployment, but cannot be subsequently edited in Form Builder.
When you use Strip_Source, you must specify an output file by using the Output_File (Forms Runtime)
parameter.
Module: Library
Default NO
Strip_Source (Form Compiler) examples
ifcmp60 module=old_lib.pll userid=scott/tiger strip_source=YES
output_file=new_lib.pll

522
Upgrade (Form Compiler)
Description
Upgrades modules from SQL*Forms 2.0, 2.3, or 3.0 to Form Builder 4.5, or from SQL*Menu 5.0 to an
Form Builder 4.5 menu module:
To upgrade from SQL*Forms 3.0 or SQL*Menu 5.0 to Form Builder 4.5, specify upgrade=yes and omit
version.
To upgrade from SQL*Forms 2.0, specify upgrade=yes and version=20.
To upgrade from SQL*Forms 2.3, specify upgrade=yes and version=23.
Module: Form, Menu
Default NO
Usage Notes
The Upgrade option does not work in combination with the Insert option.
Upgrade (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger upgrade=YES

523
Upgrade_Roles (Form Compiler)
Description
Upgrades SQL*Menu 5.0 table privileges to Oracle8 database roles.
Note: Menu roles are independent of any specific menu application (no module name is specified). You
cannot specify upgrade=yes and upgrade_roles=yes in one run.
Module: none
Default NO
Upgrade_Roles (Form Compiler) examples
ifcmp60 userid=system/manager upgrade_roles=YES

524
Version (Form Compiler)
Description
Indicates version from which to upgrade. Use in conjunction with upgrade=yes to upgrade from version 2.3
(version=23) or version 2.0 (version=20).
To upgrade from version 3.0, specify upgrade=yes and omit the version parameter.
Module: Form
Default version=30
Version (Form Compiler) examples

525
Widen_Fields (Form Compiler)
Description
Use the Widen_Fields option in conjunction with Upgrade. When upgrading to Version 4.5, the bevels
on each field can cause the loss of up to one character per field. Specify this option when upgrading to
automatically add one character to the Display Width of each field. Note: This has no effect on the
maximum allowable data length.
This option is most useful for upgrading Form Builder 3.0 character-mode applications with a large
number of 1-6 character fields. The effects of the Widen_Fields option will depend on your interface
design, and should be tested carefully. Effects can include:
• Text items may overlap boilerplate text if space between fields is limited.
• If two fields are currently flush against each other, the Widen_Fields option will cause the fields to
overlap.
Module: Form
Default NO
Widen_Fields (Form Compiler) examples
ifcmp60 module=myform userid=scott/tiger upgrade=yes
widen_fields=YES

526
Setting Form Builder Preferences
Form Builder preferences specify Form Builder session default behavior. Choose Tools Preferences
in Form Builder to invoke the Preferences dialog box. To set options, click on the check boxes or fill in
file names for the options you choose.
The Preferences dialog box includes both Form Builder and Forms Runtime preferences.
Form Builder Preferences
You can set the following design options to specify the defaults for the current Form Builder session:
• Save Before Building
• Build Before Running
• Suppress Hints
• Run Module Asynchronously
• Use System Editor
• Module Access (File, Database, File/Database)
• Module Filter (Forms, Menus, Libraries, All)
• Printer
• Color Palette
• Color Mode
For information on a specific design option, see the alphabetical list that follows.
Runtime Options
You can set the following Runtime options to specify the defaults for forms that you run from Form
Builder:
• Buffer Records in File
• Debug Mode
• Array Processing
• Optimize SQL Processing
• Optimize Transaction Mode Processing
• Statistics
• Display Block Menu
• Query Only Mode
• Quiet Mode
Runtime options are listed earlier in this chapter.
Keyword Parameters

527
In addition to the options listed in the Options dialog, you can set these keyword parameters on the Form
Builder command line:
• Module_Type
• Module_Access
• Help
Setting Form Builder Options examples
ifbld60 module=orders userid=scott/tiger module_type=menu

528
Color Mode
Determines how an Form Builder color palette will be loaded on your system. Each time you load, open,
or create a form, Form Builder loads the Form Builder color palette into your current system color table.
Because this system color table can handle only a limited number of colors at once, Form Builder may
not be able to accurately modify multiple forms simultaneously if they use different color palettes. For
this reason, use the Read Only - Shared option except when you are actively modifying the Form Builder
color palette.
Color Mode options:
Editable Select Editable mode only when you want to change the Form Builder color
palette. Once you have changed the color palette, return to Read Only -
Shared mode. In Editable mode, each color has its own unique entry in the
current system color table, and if there is no more room in the table, the
color palette may refuse to load.
To change the Form Builder color palette:
• Change Color Mode to Editable and save your options (Tools ->
Preferences, General tab, Color Mode).
• Restart Form Builder.
• Use Formet -> Layout Options -> Color Palette to make changes to
the color palette (only when the Layout Editor is open).
• Use File -> Export -> Color Palette to save the Form Builder color
palette to a file (only when the Layout Editor is open).
• Change your options to use the new color file (Tools ->
Preferences, General tab, Color Palette).
• Change Color Mode back to Read Only - Shared and save your
options.
• Restart Form Builder.
Read Only-Shared In Read Only - Shared mode, Form Builder maps duplicate colors to the
same entry in the current system color table before appending new entries
from your Form Builder color palette. Read Only - Shared will help you
avoid the color flicker that can result when you switch between Form
Builder color palettes and is the recommended setting for Color Mode
unless you are modifying the palette.
Read Only-Private This option is provided for consistency with Graphics Builder, and is not
relevant for Form Builder. In Form Builder, it maps to Read Only -
Shared.
Default Read Only - Shared

529
Color Palette
Description
Specifies the name of the Form Builder color palette that is automatically loaded when you create a new
form. If this field is left blank, the Form Builder default color palette is loaded.
For more information about color palettes, refer to About Color Palettes.

530
Build Before Running
Description
Determines whether Form Builder automatically compiles the active module before running a form.
When Build Before Running is checked, Form Builder does the following when you issue the Program-
>Run Form command to run a specified form:
• builds the active form, menu, or library module to create an executable runfile having the same
name as the module
runs the .FMX file (form runfile) you specify in the Run dialog
box.
This option lets you avoid issuing separate Compile and Run commands each time you modify and then
run a form. However, this option does not save the module. You must issue the File Save command
to save the module, or check the Save Before Building preference.
Also, when the Build Before Running option is checked, Form Builder does not automatically compile
any menu or library modules attached to that form. You must compile menu and library modules
separately before running a form that references them.
Default: Off

531
Help (Form Builder)
Description
Module: All
Default NO
Help (Form Builder) examples
ifbld60 help=YES

532
HTML File Name
Description
Specifies the HTML file to be used to run the form using the Web Previewer.
When you preview a form in the Web Previewer, a container HTML file is created dynamically with the
runtime options specified by preferences or by default. This file is sent to the Web Previewer to execute
your form. Enter the path and filename of a custom HTML file to supersede the one Form Builder
creates.

533
Access preference (Form Builder)
Description
Specifies whether to open and save modules to the file system or to the database.
This option can be set on the command line using the Module_Access parameter or within the Form
Builder Access tab of the Preferences dialog box.
The command line parameter establishes access on a one-time basis for the current Form Builder session.
On the command line, the Module_Access option can be set to file or database.
To set this option for future Form Builder sessions, use the Access preference (Tools->Preferences
Access tab) to change your Preferences file.
In the Module Access option, you can specify one of the following storage preferences for opening and
saving modules:
File Modules are loaded from and saved to the file system.
Database Modules are loaded from and saved to the database.
Ask Modules can be loaded from and saved to either the file system or the database. Form
Builder will prompt for the location of the file each time you perform these operations.
Module: All
Default FILE
Access preference (Form Builder) examples
ifbld60 module=myform userid=scott/tiger module_access=database

534
Module_Type (Form Builder)
Description
Specifies module type for current module. By specifying Module_Type, you can have form, menu and
library modules with the same name.
Module: All
Default FORM
Module_Type (Form Builder) examples
ifbld60 module=orders userid=scott/tiger module_type=menu

535
Printer
The name of the default printer. This name is operating-system dependent.
For more information about printers, refer to the Form Builder documentation for your operating system.

536
Run Modules Asynchronously
Determines whether forms that you run from Form Builder are executed synchronously or
asynchronously with respect to Form Builder itself:
• When Run Modules Asynchronously is Off, forms you run from Form Builder are synchronous.
That is, you cannot work in Form Builder until you exit the form.
• When Run Modules Asynchronously is On, forms you run from Form Builder are asynchronous, so
you can move back and forth between Form Builder and Forms Runtime.
When you run a form synchronously, Form Builder notifies you of any Forms Runtime startup errors that
occur by displaying an alert in Form Builder. When you run a form asynchronously, no such
communication between Forms Runtime and Form Builder occurs, and Forms Runtime startup errors are
not reported in Form Builder.
Default Off

537
Save Before Building
Determines whether Form Builder saves the current module automatically before it is built either when
you choose File->Administration->Compile File or when the form is built before running when the
Build Before Running preference is checked.
Default Off

538
Subclassing Path
Description
Specifies whether to save the path of an original object with the subclassed object.
Specify one of the following preferences for saving the path of original objects with subclassed objects:
Remove The path will be removed from the filename of the original object
referenced in the subclassed object.
Keep The subclassed object will reference the original object according to the
full path.
Ask Each time you subclass an object Form Builder will display a dialog box
prompting whether to remove or keep the path.
Default ASK
Notes
A subclassed object inherits property values from the original object and references the original object by
the file name of the form in which it is saved. The full path name of the form may be saved with the
subclassed object or only the filename. When the form containing the subclassed object is opened, Form
Builder looks for the file specified for the subclassed object. If the filename is specified without the path,
Form Builder looks in the current directory in which Form Builder was started.

539
Suppress Hints
Determines whether hints are suppressed from the message line as you work in Form Builder.
Default Off

540
Term (Form Builder)
Description
Specifies a mapping other than the default mapping for the current device and product:
resfile The file name specified is the name of your Oracle Terminal resource file.
If you do not specify resfile, Form Builder defaults to a file name that is
platform-specific, but begins with "FMR" on most platforms. For
example, the Microsoft Windows default file is FMRUSW.
mymapping The mapping name specified is the mapping you want to use for this Form
Builder session.
For more information on resource files, refer to the Form Builder documentation for your operating
system.
Note: You or the DBA define mappings with Oracle Terminal.
Term (Form Builder) examples
ifbld60 module=myform userid=scott/tiger term=resfile:mymapping

541
USESDI (Forms Runtime and Web Forms Runtime)
Description
Use single document interface (SDI) system of window management during a Forms Runtime or Web
Forms Runtime session.
There is no multiple document interface (MDI) root window. MDI toolbars exist in parent windows and
menus will be attached to each window.
Calls to the FORMS_MDI_WINDOW constant returns NULL as the MDI window handle when
usesdi=YES.
Option Name None
Default YES
Usage Notes:
SDI Forms are not native windows and you cannot navigate to the SDI window by using certain native
OS methods to access windows, such as Alt-TAB on Microsoft Windows.
USESDI (Forms Runtime) examples
ifrun60 module=myform userid=scott/tiger usesdi=YES

542
Use System Editor
Determines which editor Form Builder uses when you invoke an editor from a multi-line text item.
When Use System Editor is unchecked, Form Builder displays the default editor. When Use System
Editor is checked, Form Builder displays the default system editor defined on your system.
Note: If Use System Editor is checked and you are using an editor with a native document format, you
must save the document as ASCII text (with line breaks), instead of saving the document in that editor’s
format.
For more information about defining the default system editors, refer to the Form Builder documentation
for your operating system.
Default Off

543
User Preference File
Although the Preferences dialog box is the most convenient way to set preferences, you can also set them
directly in the preference file (usually called PREFS.ORA).
The preference file that enforces Form Builder options is automatically updated every time you change
your preferences. Form Builder reads the updated preference file when you start Form Builder. This file
contains keywords and settings that allow you to preset each of the Form Builder and Forms Runtime
options.
You can use any of the Form Builder or Forms Runtime keyword parameters listed in this chapter in a
user preference file. For example, to ensure that any form that you run from Form Builder runs in quiet
mode, you would include the following line in the user preference file:
FORMS.QUIET=ON
The preference file also allows you to preset a mapping for Form Builder. On most platforms, the
preference file must be named PREFS.ORA and must reside in the login directory.
If you start Form Builder with a command line parameter that specifies a preference setting or mapping,
the command line parameter overrides the setting in the preference file. Also, if a line in the preference
file contains an error, Form Builder ignores that line when it reads the file.
Syntax for Options
To preset a Form Builder or Forms Runtime option, include the appropriate keyword and setting in the
preference file, just as you would on the command line. Use the following syntax:
KEYWORD = {ON | OFF | STRING}
For a list of keywords and appropriate values, save your preferences, then examine the current contents
of your PREFS.ORA file.

544
Welcome Dialog
Description
Determines whether the welcome screen is displayed when Form Builder is started.
When checked, the welcome screen will be displayed when Form Builder is started. When unchecked,
Form Builder starts with a new, blank module called module1.
Default ON

545
Welcome Pages
Description
Determines whether the welcome page for a specific wizard is displayed when the wizard is invoked.
When checked, the welcome page will be displayed when the wizard is started. When unchecked, the
wizard does not display the welcome page.
Applies to
Data Block Wizard
LOV Wizard
Layout Wizard
Chart Wizard
Default ON

546
Properties
What are properties?
Each object in a Form Builder application possesses characteristics known as properties. An object’s
properties determine its appearance and functionality.
About setting and modifying properties
Each property description includes a Set heading that describes how you can set the property; either
declaratively in Form Builder (using the Property Palette), programmatically at runtime, or both.
Setting Properties Programmatically
To dynamically modify object properties programmatically, use the following Form Builder built-ins
subprograms:
• SET_APPLICATION_PROPERTY
• SET_BLOCK_PROPERTY
• SET_CANVAS_PROPERTY
• SET_FORM_PROPERTY
• SET_ITEM_PROPERTY
• SET_ITEM_INSTANCE_PROPERTY
• SET_LOV_PROPERTY
• SET_MENU_ITEM_PROPERTY
• SET_PARAMETER_ATTR
• SET_RADIO_BUTTON_PROPERTY
• SET_RECORD_PROPERTY
• SET_RELATION_PROPERTY
• SET_REPORT_OBJECT_PROPERTY
• SET_TAB_PAGE_PROPERTY
• SET_VIEW_PROPERTY
• SET_WINDOW_PROPERTY
You can programmatically determine the settings of most properties by using the set of corresponding
built-ins to get properties (e.g., GET_ITEM_PROPERTY).

547
Reading property descriptions
Description
The property descriptions follow a general pattern. The property name is printed in a bold typeface and
is followed by a brief description.
The headings in the following table are included for those properties to which they apply.
Heading Description
Applies to The object class or classes for which this property is
meaningful.
Set Where you can set the property: in Form Builder (using
the Property Palette), programmatically at runtime, or
both.
Refer to Built-in Built-in(s) you can use to set the property, if you can set
the property programmatically.
Default The default value of the property.
Required/Optional Whether the property is required or optional.
Restrictions: Any restrictions potentially affecting usage of the
property.
Usage Notes Any particular usage considerations you should keep in
mind when using the property.

548
About Control property
Description
For ActiveX (OCX) control items in the layout editor. Provides a link to an about screen describing the
current OCX control.
Applies to ActiveX items
Set Form Builder
Required/Optional optional

549
Access Key property
Description
Specifies the character that will be used as the access key, allowing the operator to select or execute an
item by pressing a key combination, such as Alt-C.
The access key character is displayed with an underscore in the item label.
For example, assume that Push_Button1’s label is "Commit" and the access key is defined as "c". When
the operator presses Alt-C (on Microsoft Windows), Form Builder executes the "Commit" command.
Applies to button, radio button, and check box
Set Form Builder
Default
No
Required/Optional Optional
Usage Notes
• When the operator initiates an action via an access key, any triggers associated with the action fire.
For example, assume that Push_Button1 has an access key assigned to it. Assume also that there is
a When-Button-Pressed trigger associated with Push_Button1. When the operator presses the
access key, the When-Button-Pressed trigger fires for Push_Button1.
Access Key restrictions
• Buttons with the Iconic property set to Yes cannot have an access key.

550
Alert Style property
Description
Specifies the alert style: caution, warning, or informational. On GUI platforms, the alert style determines
which bitmap icon is displayed in the alert.
Applies to alert
Set Form Builder
Default
warning

551
Alias property
Description
Establishes an alias for the table that the data block is associated with.
Applies to table/columns associated with a data block
Set Form Builder
Default
The Data Block wizard sets the Alias property to the first letter of the table name. (For example, a table
named DEPT would have a default alias of D.)
Required/Optional required for Oracle8 tables that contain column objects or REFs
Usage Notes
For Oracle8 tables, SELECT statements that include column objects or REF columns must identify both
the table name and its alias, and must qualify the column name by using that alias as a prefix.
For example:
CREATE TYPE ADDRESS_TYPE AS OBJECT
(STREET VARCHAR2(30),
CITY VARCHAR2(30),
STATE VARCHAR2(2));
CREATE TABLE EMP
(EMPNO NUMBER,
ADDRESS ADDRESS_TYPE);
If the alias for this EMP table were E, then a SELECT statement would need to be qualified as follows:
SELECT EMPNO, E.ADDRESS.CITY FROM EMP E;
In this case, the alias is E. The column object ADDRESS.CITY is qualified with that alias, and the alias
is also given after the table name. (The column EMPNO, which is a normal relational column, requires
no such qualification.)
In most situations, Form Builder will handle this alias naming for you. It will establish an alias name at
design-time, and then automatically use the qualified name at runtime when it fetches the data from the
Oracle8 Server. You only need to concern yourself with this alias naming if you are doing such things as
coding a block WHERE clause.

552
Allow Expansion property
Description
Specifies whether Form Builder can automatically expand a frame when the contents of the frame extend
beyond the frame’s borders.
Applies to frame
Set Form Builder
Default
Yes
Required/Optional required

553
Allow Empty Branches property
Description
Specifies whether branch nodes may exist with no children. If set to FALSE, branch nodes with no
children will be converted to leaf nodes. If set to TRUE, an empty branch will be displayed as a
collapsed node.
Applies to hierarchical tree
Set Form Builder, programmatically
Default
False

554
Allow Multi-Line Prompts property
Description
Specifies whether Form Builder can conserve space within a frame by splitting a prompt into multiple
lines. Prompts can only span two lines.
Applies to frame
Set Form Builder
Default
Yes

555
Allow Start-Attached Prompts property
Description
Specifies whether space usage can be optimized when arranging items in tablular-style frames.
By default, this property is set to No, and prompts are attached to the item’s top edge. Setting Allow
Start-Attached Prompts to Yes allows you to attach prompts to the item’s start edge if there is enough
space.
Applies to frame
Set Form Builder
Default
No

556
Allow Top-Attached Prompts property
Description
Specifies whether space usage can be optimized when arranging items in form-style frames.
By default, this property is set to No, and prompts are attached to the item’s start edge. Setting Allow
Top-Attached Prompts to Yes allows you to attach prompts to the item’s top edge if there is enough
space.
Applies to frame
Set Form Builder
Default
No

557
Application Instance property
Description
Specifies a reference to an instance of an application on the Microsoft Windows platform. Other
platforms always return the NULL value.
Applies to form, block, or item
Refer to Built-in
GET_APPLICATION_PROPERTY
Default
NULL
Usage Notes
Specify the APPLICATION_INSTANCE property in GET_APPLICATION_PROPERTY to obtain the
pointer value of an instance handle. To use the instance handle when calling the Windows API, this
pointer value must be converted with TO_PLS_INTEGER.
Application Instance restrictions
Valid only on Microsoft Windows (Returns NULL on other platforms).

558
Arrow Style property
Description
Specifies the arrow style of the line as None, Start, End, Both ends, Middle to Start, or Middle to End.
Applies to graphic line
Set Form Builder
Default
None

559
Associated Menus property
Description
Indicates the name of the individual menu in the module with which the parameter is associated. When
the operator navigates to a menu that has an associated parameter, Form Builder prompts the operator to
enter a value in the Enter Parameter Values dialog box.
Applies to menu parameter
Set Form Builder
Associated Menus restrictions
Applies only to full-screen menus.

560
Audio Channels property
Description
Specifies the number of channels with which the sound item will be stored in the database: either
Automatic, Mono, or Stereo.
When you use the or WRITE_SOUND_FILE built-in subprogram to write sound data to the filesystem,
use the channels parameter to control the number of channels with which the sound data will be written
to the filesystem.
Applies to sound item
Refer to Built-in
• WRITE_SOUND_FILE
Default
Automatic

561
Automatic Column Width property
Description
Specifies whether LOV column width is set automatically.
• When Automatic Column Width is set to Yes, the width of each column is set automatically to the
greater of the two following settings:
the width specified by the Display Width property
or
the width necessary to display the column’s title as specified in the Column Title property.
• When Automatic Column Width is set to No, the width of each column is set to the value specified
by the Display Width property.
Applies to LOV
Set Form Builder
Default
No

562
Automatic Display property
Description
Specifies whether Form Builder displays the LOV automatically when the operator or the application
navigates into a text item to which the LOV is attached.
Applies to LOV
Set Form Builder
Default
No

563
Automatic Position property
Description
Specifies whether Form Builder automatically positions the LOV near the field from which it was
invoked.
Applies to LOV
Set Form Builder
Default
No

564
Automatic Query property
Description
See Coordination.

565
Automatic Refresh property
Description
Determines whether Form Builder re-executes the query to populate an LOV that is based on a query
record group. By default, Form Builder executes the query to populate an LOV’s underlying record
group whenever the LOV is invoked; that is, whenever the LOV is displayed, or whenever Form Builder
validates a text item that has the Use LOV for Validation property set to Yes.
• When Automatic Refresh is set to Yes (the default), Form Builder executes the query each time the
LOV is invoked. This behavior ensures that the LOV’s underlying record group contains the most
recent database values.
• When Automatic Refresh is set to No, Form Builder executes the query only if the LOV’s underlying
record group is not flagged as having been populated by a query that occurred because this or any
other LOV was invoked. (Remember that more than one LOV can be based on the same record
group.) If the LOV’s underlying record group has already been populated as a result of an LOV
displaying, Form Builder does not re-execute the query, but instead displays the LOV using the
records currently stored in the record group.
The Automatic Refresh property also determines how long records retrieved by the query remain stored
in the underlying record group:
• When Automatic Refresh is set to Yes, records returned by the query are stored in the underlying
record group only as long as the LOV is needed. Once the operator dismisses the LOV, or
validation is completed, the record cache is destroyed.
• When Automatic Refresh is set to No, records from the initial query remain stored in the LOV’s
underlying record group until they are removed or replaced. You can manipulate these records
programmatically. For example, you can explicitly replace the records in an LOV’s underlying
record group by calling the POPULATE_GROUP built-in. Other record group built-ins allow you
to get and set the values of cells in a record group.
Applies to LOV
Refer to Built-in
• GET_LOV_PROPERTY
Default
Yes
Usage Notes
• When multiple LOVs are based on the same record group, it is usually appropriate to use the same
Automatic Refresh setting for each one. This is not, however, a strict requirement; the following
scenario describes refresh behavior when one LOV has Automatic Refresh set to Yes and another
has Automatic Refresh set to No.

566
LOV1 and LOV2 are based on the same record group; LOV1 has Automatic Refresh set to Yes, LOV2
has Automatic Refresh set to No. When LOV1 is invoked, Form Builder executes the query to
populate the underlying record group. When the operator dismisses LOV1, Form Builder destroys the
record cache, and clears the record group.
When LOV2 is subsequently invoked, Form Builder again executes the query to populate the record
group, even though LOV2 has Automatic Refresh set to No. Because LOV2’s underlying record group
was cleared when LOV1 was dismissed, Form Builder does not consider it to have been queried by an
LOV invocation, and so re-executes the query.
If, on the other hand, both LOV1 and LOV2 had Automatic Refresh set to No, Form Builder would
execute the query when LOV1 was invoked, but would not re-execute the query for LOV2. This is
true even if the initial query returned no rows.
• When Automatic Refresh is set to No, you can programmatically replace the rows that were returned
by the initial query with POPULATE_GROUP. Form Builder ignores this operation when deciding
whether to re-execute the query. (Form Builder looks only at the internal flag that indicates whether
a query has occurred, not at the actual rows returned by that query.)
Automatic Refresh restrictions
Valid only for an LOV based on a query record group, rather than a static or non-query record group.

567
Automatic Select property
Description
Specifies what happens when an LOV has been invoked and the user reduces the list to a single choice
when using auto-reduction or searching:
• When Automatic Confirm is set to Yes, the LOV is dismissed automatically and column values from
the single row are assigned to their corresponding return items.
• When Automatic Confirm is set to No, the LOV remains displayed, giving the operator the option to
explicitly select the remaining choice or dismiss the LOV.
Applies to LOV
Set Form Builder
Default
No

568
Automatic Skip (Item) property
Description
Moves the cursor to the next navigable item when adding or changing data in the last character of the
current item. The last character is defined by the Maximum Length property.
Applies to text item
Refer to Built-in
• GET_ITEM_PROPERTY
Default
No
Usage Notes
Combine the Automatic Skip property with the Fixed Length property to move the cursor to the next
applicable text item when an operator enters the last required character.
Automatic Skip (Item) restrictions
• Valid only for single-line text items.
• The Key-NXT-ITEM trigger does not fire when the cursor moves as a result of this property. This
behavior is consistent with the fact that the operator did not press [Next Item].

569
Automatic Skip (LOV) property
Description
Moves the cursor to the next navigable item when the operator makes a selection from an LOV to a text
item. When Automatic Skip is set to No, the focus remains in the text item after the operator makes a
selection from the LOV.
Applies to LOV
Refer to Built-in
SET_ITEM_PROPERTY
Default
No
Automatic Skip (LOV) restrictions
• The Key-NXT-ITEM trigger does not fire when the cursor moves as a result of this property. This
behavior is consistent with the fact that the operator did not press [Next Item].

570
Background_Color property
Description
Specifies the color of the object’s background region.
Applies to item, tab page, canvas, window, radio button
Set Programmatically
Default
Unspecified
Refer to Built-in
• GET_RADIO_BUTTON_PROPERTY
• GET_TAB_PAGE_PROPERTY
• GET_CANVAS_PROPERTY
• GET_WINDOW_PROPERTY

571
Bevel property
Description
Specifies the appearance of the object border, either RAISED, LOWERED, INSET, OUTSET, or
NONE. Can also be set programmatically at the item instance level to indicate the property is unspecified
at this level. That is, if you set this property programmatically at the item instance level using
SET_ITEM_INSTANCE_PROPERTY, the border bevel is determined by the item-level value specified
at design-time or by SET_ITEM_PROPERTY at runtime.
Applies to chart item, image item, custom item, stacked canvases, text items (Microsoft Windows only)
Set Form Builder, programmatically [BORDER_BEVEL]
Refer to Built-in
• GET_ITEM_INSTANCE_PROPERTY
Default
LOWERED
Usage Notes
• To create a scrolling window, the Bevel property should be set to RAISED or LOWERED.
Bevel restrictions
• On window managers that do not support beveling, the RAISED, LOWERED, and NONE options
are equivalent, and simply specify that the item should have a border.
• If the item’s Bevel property is set to None in Form Builder, you cannot set BORDER_BEVEL
programmatically.
• You cannot programmatically set BORDER_BEVEL to NONE.

572
Block Description property
Description
See Listed in Block Menu/Block Description.

573
Bottom Title (Editor) property
Description
Specifies a title of up to 72 characters to appear at the bottom of the editor window.
Applies to editor
Set Form Builder

574
Bounding Box Scalable property
Description
Specifies whether the text object’s bounding box should be scaled when the text object is scaled.
Applies to graphic text
Set Form Builder
Default
Yes

575
Builtin_Date_Format property
Description
This property establishes the format mask used in converting a date value to or from a string that is not
potentially visible to the end user. This format mask is most commonly used when executing a built-in
subprogram.
Applies to application (global value)
Set programmatically
Refer to Built-in
• GET_APPLICATION_PROPERTY built-in
• SET_APPLICATION_PROPERTY built-in
Required/Optional optional. However, it is STRONGLY RECOMMENDED that, for a new
application, you set this property to a format mask containing full century and time information. It is
also recommended that this format mask be the same as the one specified in the
PLSQL_DATE_FORMAT property .
Default
As noted above, it is strongly recommended that you explicitly set this value for a new application.
However, if you do not, the default value used will depend on the context.
Forms first determines whether the item is a DATE2, DATE4, or DATETIME object, and then tries a
series of format masks accordingly. (These default masks are used for compatibility with prior releases.)
Object types are determined as shown in the following table:
Date object Type
Item of datatype DATETIME DATETIME
Item of datatype DATE:
…having a format mask that contains yyyy,
YYYY, rrrr, or RRRR
DATE4
…having a format mask that does not
contain yyyy, YYYY, rrrr, or RRRR
DATE2
…not having a format mask, and its length
(Maximum Length) is 10 or more
DATE4
…not having a format mask, and its length
(Maximum Length) is 9 or less
DATE2
Parameter (as in :PARAMETER.myparam)
of datatype DATE. (Note that there are no
DATETIME parameters, and that a
parameter's Maximum Length property
applies only to CHAR parameters.)
DATE2
LOV column of datatype DATE. (Note that DATE2

576
there are no DATETIME LOV columns.)
Internal value of system variables
CURRENT_DATETIME and
EFFECTIVE_DATE
DATETIME
After determining the object type of the item to be converted, Forms uses one of the masks listed below.
There are two sets of masks -- one set for YY operations, and another set for RR operations.
For a date-to-string operation, only the first (primary) format mask is used. For a string-to-date
operation, Form Builder first tries the first/primary format mask. If that conversion is unsuccessful, it
tries the other (secondary) masks, in the order shown
For YY:
Object Type Format Masks Used
DATE2 DD-MON-YY
DD-MM-SYYYY HH24:MI:SS
DATE4 DD-MON-YYYY
DATETIME DD-MON-YYYY HH24:MI:SS
DD-MON-YYYY HH24:MI
For RR:
Object Type Format Masks Used
DATE2 DD-MON-RR
DATE4 DD-MON-RRRR
DATETIME DD-MON-RRRR HH24:MI:SS
DD-MON-RRRR HH24:MI

577
Button 1 Label, Button 2 Label, Button 3 Label
properties
Description
Specifies the text labels for the three available alert buttons.
Applies to alert
Refer to Built-in
SET_ALERT_BUTTON_PROPERTY
Required/Optional At least one button must have a label.
Default
Button 1 Label: OK, Button 2 Label: Cancel, Button 3 Label: NULL

578
Calculation Mode property
Description
Specifies the method of computing the value of a calculated item. Valid values are:
None The default. Indicates the item is not a calculated item.
Formula Indicates the item’s value will be calculated as the result of a user-written
formula. You must enter a single PL/SQL expression for an item’s formula.
The expression can compute a value, and also can call a Form Builder or
user-written subprogram.
Summary Indicates the item’s value will be calculated as the result of a summary
operation on a single form item. You must specify the summary type, and
the item to be summarized.
Applies to item
Set Form Builder
Default
None

579
Calling_Form property
Description
Specifies the name of the calling form, as indicated by the form module Name property.
Applies to application
Set not settable
Refer to Built-in
Default
NULL
Usage Notes
Only valid in a called form; that is, a form that was invoked from a calling form by the execution of the
CALL_FORM built-in procedure.

580
Canvas property
Description
Specifies the canvas on which you want the item to be displayed.
Applies to item
Set Form Builder
Default
The item’s current canvas assignment.
Usage Notes
• Items are assigned to a specific canvas, which in turn is assigned to a specific window.
• If you leave the Canvas property blank, the item is a NULL-canvas item; that is, an item that is not
assigned to any canvas and so cannot be displayed in the Form Editor or at runtime.
• If you change the name of a canvas in the Form Builder, Form Builder automatically updates the
Canvas property for all items assigned to that canvas.
Canvas restrictions
The canvas specified must already exist in the form.

581
Canvas Type property
Description
Specifies the type of canvas, either Content, Stacked, Vertical Toolbar Canvas, or Horizontal Toolbar
Canvas. The type determines how the canvas is displayed in the window to which it is assigned, and
determines which properties make sense for the canvas.
Content The default. Specifies that the canvas should occupy the entire content area
of the window to which it is assigned. Most canvases are content canvases.
Stacked Specifies that the canvas should be displayed in its window at the same time
as the window’s content canvas. Stacked views are usually displayed
programmatically and overlay some portion of the content view displayed
in the same window.
Vertical Toolbar Canvas Specifies that the canvas should be displayed as a vertical toolbar under the
menu bar of the window. You can define iconic buttons, pop-lists, and other
items on the toolbar as desired.
Horizontal Toolbar
Canvas
Specifies that the canvas should be displayed as a horizontal toolbar at the
left side of the window to which it is assigned.
Applies to canvas
Set Form Builder
Default
Content
Usage Notes
In the Property Palette, the properties listed under the Stacked View heading are valid only for a canvas
with the Canvas Type property set to Stacked.

582
Cap Style property
Description
Specifies the cap style of the graphic object’s edge as either Butt, Round, or Projecting.
Applies to graphic physical
Set Form Builder
Default
Butt

583
Case Insensitive Query property
Description
Determines whether the operator can perform case-insensitive queries on the text item.
Refer to Built-in
Default
No
Usage Notes
Case-insensitive queries are optimized to take advantage of an index. For example, assume you perform
the following steps:
• Create an index on the EMP table.
• Set the Case Insensitive Query property on ENAME to Yes.
• In Enter Query mode, enter the name ’BLAKE’ into :ENAME.
• Execute the query.
Form Builder constructs the following statement:
SELECT * FROM EMP WHERE UPPER(ENAME) = ’BLAKE’ AND
(ENAME LIKE ’Bl%’ OR ENAME LIKE ’bL%’ OR
ENAME LIKE ’BL%’ OR ENAME LIKE ’bl%’);
The last part of the WHERE clause is performed first, making use of the index. Once the database finds
an entry that begins with bl, it checks the UPPER(ENAME) = ’BLAKE’ part of the statement, and makes
the exact match.
Case Insensitive Query restrictions
If you set this property to Yes, queries may take longer to execute.

584
Case Restriction property
Description
Specifies the case for text entered in the text item or menu substitution parameter. The allowable values
for this property are as follows:
Value Result
MIXED Text appears as typed.
UPPER Lower case text converted to upper case as it is typed.
LOWER Upper case text converted to lower case as it is typed.
Applies to text item, menu substitution parameters
Refer to Built-in
• SET_ITEM _PROPERTY
Case Restriction restrictions
• Values assigned to the text item through triggers are not effected.
• Case Restriction governs the display of all strings, whether they are entered by an operator or
assigned programmatically, because Case Restriction serves as both an input and output format
mask enforced by the user interface.
If you programmatically assign string values that conflict with the setting for Case Restriction, you will
not see the effect in the text item because its display will be forced to conform to the current setting of
Case Restriction. This also means that if data that violates the Case Restriction setting is queried into
or programmatically assigned to an item, then what the end user sees on the screen may differ from the
internal value of that text item. For example, if Case Restriction is set to UPPER and the data retrieved
from the data source is in mixed case, the form will display it in UPPER, but the actual value of the
data will remain mixed case. However, If the data is subsequently modified in that field and the change
is committed, the value of the data will change to upper case.

585
Character Cell WD/HT properties
Description
Specifies the width and height of a character cell when the Coordinate System property is set to Real,
rather than Character. The width and height are expressed in the current real units (centimeters, inches,
or points) indicated by the Real Unit property setting.
Applies to form module
Set Form Builder
Usage Notes
The character cell size is specified in the Coordinate System dialog in pixels but displayed in the Layout
Editor in points.

586
Chart Type property
Description
Specifies the base chart type. Available types of charts are Column, Pie, Bar, Table, Line, Scatter,
Mixed, High-low, Double-Y, and Gantt.
Applies to chart item
Set Form Builder
Default
Column

587
Chart Subtype property
Description
Specifies a variation of the chart type. Each variation is based on the specified chart type, with various
properties set to achieve a different look.
Set Form Builder
Default
Column

588
Check Box Mapping of Other Values property
Description
Specifies how any fetched or assigned value that is not one of the pre-defined "checked" or "unchecked"
values should be interpreted.
Applies to check box
Set Form Builder
Default
NOT ALLOWED
Usage Notes
The following settings are valid for this property:
Setting Description
Not Allowed Any queried record that contains a value other than the user-
defined checked and unchecked values is rejected and no error is
raised. Any attempt to assign an other value is disallowed.
Checked Any value other than the user-defined unchecked value is
interpreted as the checked state.
Unchecked Any value other than the user-defined checked value is
interpreted as the unchecked state.

589
Checked property
Description
Specifies the state of a check box- or radio-style menu item, either CHECKED or UNCHECKED.
Applies to menu item
Refer to Built-in
• GET_MENU_ITEM_PROPERTY
Default
NULL
Checked restrictions
Valid only for a menu item with the Menu Item Type property set to Check or Radio.

590
Clip Height property
Description
Specifies the height of a clipped (cropped) image in layout units. If you specify a value less than the
original image height, the image clips from the bottom.
Applies to graphic image
Set Form Builder
Default
original image height

591
Clip Width property
Description
Specifies the width of a clipped (cropped) image in layout units. If you specify a value less than the
original image’s width, the image clips from the right.
Set Form Builder
Default
original image width

592
Clip X Position property
Description
Specifies how much (in layout units) to clip off the left side of the image.
Set Form Builder
Default
0

593
Clip Y Position property
Description
Specifies how much (in layout units) to clip off the top of the image.
Set Form Builder
Default
0

594
Close Allowed property
Description
Specifies whether the window manager-specific Close command is enabled or disabled for a window. On
GUI window managers, the Close command is available on the window’s system menu, or by double-
clicking the close box in the upper-left corner of the window.
Applies to window
Set Form Builder
Default
Yes
Usage Notes
• Setting Close Allowed to Yes enables the Close command so that the Close Window event can be
sent to Form Builder when the operator issues the Close command. However, to actually close the
window in response to this event, you must write a When-Window-Closed trigger that explicitly
closes the window. You can close a window programmatically by calling HIDE_WINDOW,
SET_WINDOW_PROPERTY, or EXIT_FORM.
• On Microsoft Windows, if the operator closes the MDI parent window, Form Builder executes
DO_KEY(’Exit_Form’) by default.
Close Allowed restrictions
Cannot be set for a root window. A root window is always closeable.

595
Closed property
Description
Specifies whether an arc is closed.
Applies to graphic arc
Set Form Builder
Default
Yes

596
Column Mapping Properties property
Description
The Column Mapping Properties group includes Column Name, Column Title, Display Width, and
Return Item.
Applies to LOV
Set Form Builder
Column Name
Specifies the names of the columns in an LOV.
Required/Optional At least one column must be defined.
Default
The names of the columns in the underlying record group.
Usage Notes
The column names must adhere to object naming standards.
Column Title
Specifies the title that displays above the column currently selected in the column name list.
Display Width
Specifies the width for the column currently selected in the Column Name list.
Usage Notes
• Set the Display Width property to the width in appropriate units (points, pixels, centimeters, inches,
or characters as specified by the form’s Coordinate System property) that you want Form Builder to
reserve for the column in the LOV window. Column value truncation may occur if the Display
Width is smaller than the width of the column value. To avoid this situation, increase the Display
Width for the column.
• To make the column a hidden column, set Display Width to 0. (You can specify a return item for a
hidden column, just as you would for a displayed column.)
To add extra space between columns in the LOV window, set the Display Width wider than the column’s
default width. Note, however, that as an exception to this rule, you cannot increase the width between
a NUMBER column and a non-NUMBER column by increasing the display width for the NUMBER
column because LOVs display numbers right-justified. For example, assume that your LOV contains 3
columns: column 1 and 3 are type CHAR and column 2 is type NUMBER. To increase the width
between each column, increase the Display Width for columns 1 and 3.
Return Item
Specifies the name of the form item or variable to which Form Builder should assign the column’s value
whenever the operator selects an LOV record.

597
Default
NULL
Usage Notes
The Return Item can be any of the following entries:
• form item (block_name.item_name)
• form parameter (PARAMETER.my_parameter)
• global parameter (GLOBAL.my_global)
Do not put a colon in front of the object name.

598
Column Name property
Description
Establishes that an item corresponds to a column in the table associated with the data block.
Applies to any item except button, chart, VBX (on 16-bit Microsoft Windows 3.x), or ActiveX (on 32-
bit Windows) controls
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
Default
Yes
Usage notes
When a selected item is from a column object or REF column in a table, Form Builder creates a
compound name for it using dot notation: ObjectColumnName.AttributeName.
For example, assume dept_type were an object type having attributes of dnum, dname, and dloc, and we
had a column object called dept based on dept_type. If we then selected dname to become an item in the
data block, its column name property would become dept.dname.

599
Column Specifications property
Description
The Column Specifications group of properties include Column Name, Column Value, Data Type,
Length.
Applies to record group
Set Form Builder
Column Name
Specifies the names of the columns in a record group.
Required/Optional At least one column must be defined.
Default
Names of the columns in the underlying record group.
Usage Notes
The column names must adhere to object naming standards. There can be up to 255 columns in a record
group.
Column Value
For a static record group, specifies the row values for the column currently selected in the Column Name
list.
Default
NULL
Data Type
Specifies the data type for a given record group column.
Default
CHAR, except when you define a query record group, in which case, the data type of each column
defaults to the data type of the corresponding database column.
Restrictions
The data type of a record group column can only be CHAR, NUMBER, or DATE.
Length
Specifies the length, in characters, of the record group column currently selected in the Column Name
list.
Default

600
For a query record group, the default is the width specified for the column in the database. For a static
record group, the default is 30.
Column Specifications restrictions
• You cannot reference an uninitialized variable or an item for this property, as that action constitutes
a forward reference that Form Builder is unable to validate at design time.
• The data type of the value must correspond to the data type of its associated column, as indicated in
the Column Name property.

601
Column Title (LOV) property
Description
See Column Mapping Properties.

602
Column Value (Record Group) property
Description
See Column Specifications.

603
Command Text property
Description
Specifies menu item command text for the current menu item. Valid values depend on the current setting
of the menu item Command Type property. For instance, when the command type is MENU, valid
command text is the name of a submenu in the menu module. When the command type is PL/SQL, valid
command text is any valid PL/SQL statements.
Set Form Builder
Required/Optional Required for all command types except NULL.
Command Text restrictions
The value can be up to 240 characters in length.

604
Command Type property
Description
Specifies the nature of the menu item command. This property determines how Form Builder interprets
the text in the Command Text property.
Set Form Builder
Default
NULL
Command Type Description
Null Specifies that the menu item does not issue a command.
The NULL command is required for separator menu items
and optional for all other types of items.
Menu Invokes a submenu. Valid command text is the name of the
submenu to be invoked.
PL/SQL The default command type. Executes a PL/SQL command.
Valid command text is PL/SQL statements, including calls
to built-in and user-named subprograms.
Note: PL/SQL in a menu module cannot refer directly to
the values of items, variables, or parameters in a form
module. Instead, use the built-ins NAME_IN and COPY to
indirectly reference such values.
Plus*
Avoid. To invoke SQL*Plus, use the
PL/SQL command type, and execute
the HOST built-in to launch
SQL*Plus. (On Windows platforms,
use plus80.exe as the executable
name.)
Current Forms* Avoid. To invoke Form Builder, use the PL/SQL command
type, and execute the HOST or RUN_PRODUCT built-ins
to execute a valid Form Builder login.
Macro* Avoid. Executes a SQL*Menu macro.
*This command type
is included for
compatibility with
previous versions. Do
not use this command
type in new
applications.

606
Comments property
Description
The Comments property specifies general information about any Form Builder object that you create.
Use comments to record information that will be useful to you or to other designers who develop,
maintain, and debug your applications.
Applies to all objects
Set Form Builder

607
Communication Mode (Chart) property
Description
When calling Graphics Builder from Form Builder to create a chart, specifies the communication mode
to be used as either Synchronous or Asynchronous. Synchronous specifies that control returns to the
calling application only after the called product has finished. The end user cannot work in the form while
the called product is running. Asynchronous specifies that control returns to the calling application
immediately, even if the called application has not completed its display.
When data is returned from the called product, such as when updating a chart item, communication mode
must be synchronous.
Applies to chart items
Set Form Builder
Default
Synchronous

608
Communication Mode (Report) property
Description
For report/form integration, specifies communication mode between the form and the report as either
Synchronous or Asynchronous. Synchronous specifies that control returns to the calling application only
after the called product has finished. The end user cannot work in the form while the called product is
running. Asynchronous specifies that control returns to the calling application immediately, even if the
called application has not completed its display.
When data is returned from the called product, communication mode must be synchronous.
Applies to report integration
Set Form Builder
Default
Synchronous

609
Compress property
Description
Specifies whether a sound object being read into a form from a file should be compressed when
converting to the Oracle internal format.
Applies to sound item
Refer to Built-in
• WRITE_SOUND_FILE
Default
Automatic (uses the compression setting of the sound data, if any).

610
Compression Quality property
Description
Specifies whether an image object being read into a form from a file, or written to a file (with the
WRITE_IMAGE_FILE built-in) should be compressed, and if so, to what degree. Valid values are:
• None
• Minimum
• Low
• Medium
• High
• Maximum
Applies to image item
Refer to Built-in
Default
None

611
Conceal Data property
Description
Hides characters that the operator types into the text item. This setting is typically used for password
protection.
The following list describes the allowable values for this property:
Yes Disables the echoing back of data entered by the operator.
No Enables echoing of data entered by the operator.
Refer to Built-in
Default
No
Conceal Data restrictions
Valid only for single-line text items.

612
Connect_String property
Description
The Connect String property specifies the form operator’s SQL*NET connect string.
If the current operator does not have a SQL*NET connect string, Form Builder returns NULL.
Refer to Built-in

613
Console Window property
Description
Specifies the name of the window that should display the Form Builder console. The console includes
the status line and message line, and is displayed at the bottom of the window.
On Microsoft Windows, the console is always displayed on the MDI application window, rather than on
any particular window in the form; however, you must still set this property to the name of a form
window to indicate that you want the console to be displayed.
If you do not want a form to have a console, set this property to <Null>.
Applies to form
Set Form Builder
Default
WINDOW1

614
Control Help property
Description
For ActiveX (OCX) control items in the layout editor. Provides a link to the OCX help documentation
about the current OCX control.
Applies to ActiveX control
Set Form Builder
Default
More...

615
Control Properties property
Description
Activates the control-specific property sheet for the currently-selected OLE or ActiveX control. The
control must be visible in the Layout Editor in order to view its property sheet.
Applies to OLE/ ActiveX control
Set Form Builder

616
Coordinate System property
Description
Specifies whether object size and position values should be interpreted as character cell values, or as real
units (centimeters, inches, pixels, or points). The following settings are valid for this property:
Character Sets the coordinate system to a character cell-based measurement. The
actual size and position of objects will depend on the size of a default
character on your particular platform.
Real Sets the coordinate system to the unit of measure specified by the Real Unit
property (centimeters, inches, pixels, or points.)
Changing the coordinate system for the form changes the ruler units displayed on Form Editor rulers, but
does not change the grid spacing and snap-points settings.
Applies to form
Set Form Builder
Default
Centimeter
Usage Notes
The coordinate system you select is enforced at design time and at runtime. For example, if you
programmatically move a window with SET_WINDOW_PROPERTY, the position coordinates you pass
to the built-in are interpreted in the current form coordinate units.
When you convert from one coordinate system to another, Form Builder automatically converts object
size and position values that were specified declaratively at design time. Loss of precision can occur
when you convert to less precise units.
If portability is a concern, setting the Coordinate System to Character provides the most portable unit
across platforms, but sets a coarse grid that reduces the ability to fine-tune the layout. If your application
runs in both character-mode and GUI, the decision about which coordinate system to use depends on
which interface style you want to optimize.
If you want to optimize for GUIs, the Real setting provides maximum flexibility for proportional fonts,
but may require some fine-tuning to avoid overlapping fields on the character-mode side.
If you want to optimize for character-mode, choose the Character setting. This setting provides less
flexibility for the proportional fonts used on GUIs, but lets you line up character cell boundaries exactly.
For this type of application... Set Coordinate System to...
GUI only Real: inches, centimeters, or points
Character-mode only Character
Mixed character-mode and GUI:

617
Optimize for GUI Real
Optimize for character-mode Character

618
Coordination property
Description
Specifies how and when the population phase of block coordination should occur. Specify the
coordination desired by setting the Deferred and Automatic Query properties. When you set these
properties at design time, Form Builder creates or modifies the appropriate master-detail triggers to
enforce the coordination setting you choose.
Applies to:
relation
Set:
Form Builder, programmatically
Refer to Built-in
• GET_RELATION_PROPERTY
Default
Immediate coordination (Deferred No, Automatic Query No)
Usage Notes
Whenever the current record in the master block changes at runtime (a coordination-causing event),
Form Builder needs to populate the detail block with a new set of records. You can specify exactly how
and when that population should occur by setting this property to one of three valid settings:
Deferred=No,Automatic
Query ignored
The default setting. When a coordination-causing event
occurs in the master block, the detail records are fetched
immediately.
Deferred=Yes,
Automatic Query=Yes
When a coordination-causing event occurs, Form Builder
defers fetching the associated detail records until the
operator navigates to the detail block.
Deferred=Yes,
Automatic Query=No
When a coordination-causing event occurs, Form Builder
defers fetching the associated detail records until the
operator navigates to the detail block and explicitly
executes a query.
Deferred=No,Automatic
Query=Yes
Not a valid setting.

619
Coordination restrictions
The ability to set and get these properties programmatically is included only for applications that require
a custom master-detail scheme. For a default master-detail relation created at design time, Form Builder
generates the appropriate triggers to enforce coordination, and setting the coordination properties at
runtime has no effect on the default trigger text.

620
Coordination_Status property
Description
For a block that is a detail block in a master-detail block relation, this property specifies the current
coordination status of the block with respect to its master block(s). This property is set to the value
COORDINATED when the block is coordinated with all of its master blocks. When the block is not
coordinated with all of its master blocks, Coordination_Status is set to NON_COORDINATED.
Immediately after records are fetched to the detail block, the status of a detail block is COORDINATED.
When a different record becomes the current record in the master block, the status of the detail block
again becomes NON_COORDINATED.
Applies to relation
Refer to Built-in
• GET_BLOCK_PROPERTY
Usage Notes
This property is included for designers who are programmatically enforcing a custom master-detail block
coordination scheme. Its use is not required when you are using Form Builder declarative master-detail
coordination.

621
Copy Value from Item property
Description
Specifies the source of the value that Form Builder uses to populate the item. When you define a master-
detail relation, Form Builder sets this property automatically on the foreign key item(s) in the detail
block. In such cases, the Copy Value from Item property names the primary key item in the master block
whose value gets copied to the foreign key item in the detail block whenever a detail record is created or
queried.
Applies to all items except buttons, chart items, and image items
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
Usage Notes
• Specify this property in the form <block_name>.<block_item_name>.
• Setting the Copy Value from Item property does not affect record status at runtime, because the
copying occurs during default record processing.
• To prevent operators from de-enforcing the foreign key relationship, set the Enabled property to No
for the foreign key items.
• To get the Copy Value from Item property programmatically with GET_ITEM_PROPERTY, use
the constant ENFORCE_KEY.

622
Current Record Visual Attribute Group property
Description
Specifies the named visual attribute used when an item is part of the current record.
Applies to form, block, item
Refer to Built-in
• GET_FORM_PROPERTY
Usage Notes
This property can be set at the form, block, or item level, or at any combination of levels. If you specify
named visual attributes at each level, the item-level attribute overrides all others, and the block-level
overrides the form-level.
Note that if you define a form-level Current Record Visual Attribute, any toolbars in the form will be
displayed using that Current Record Visual Attribute. You can avoid this by defining block-level Current
Record Visual Attributes for the blocks that need them instead of defining them at the form level. If you
wish to retain the form-level Current Record Visual Attribute, you can set the block-level Current Record
Visual Attribute for the toolbar to something acceptable.
Current Record Visual Attribute is frequently used at the block level to display the current row in a
multi-record block in a special color. For example, if you define Vis_Att_Blue for the Emp block which
displays four detail records, the current record will display as blue, because it contains the item that is
part of the current record.
If you define an item-level Current Record Visual Attribute, you can display a pre-determined item in a
special color when it is part of the current record, but you cannot dynamically highlight the current item,
as the input focus changes. For example, if you set the Current Record Visual Attribute for EmpNo to
Vis_Att_Green, the EmpNo item in the current record would display as green. When the input focus
moved to EmpName, EmpNo would still be green and EmpName would not change.

623
Current_Form property
Description
Specifies the name of the .FMX file of the form currently being
executed.
Set not settable
Refer to Built-in
Usage Notes
Get the value of this property to determine the name of the file the current form came from in an
application that has multiple called forms.
Current_Form at the application level corresponds to File_Name at the form level. File_Name is
gettable with GET_FORM_PROPERTY.

624
Current_Form_Name property
Description
Specifies the name of the current form, as indicated by the form module Name property.
Set not settable
Refer to Built-in
Usage Notes
Get the value of this property to determine the name of the current form in an application that has
multiple called forms.
Current_Form_Name at the application level corresponds to Form_Name at the form level. Form_Name
is gettable with GET_FORM_PROPERTY.

625
Current_Record property
Description
Specifies the number of the current record in the block’s list of records.
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY

626
Current_Row_Background_Color property
Description
Specifies the color of the object’s background region.
Applies to item, block, form
Default
NULL
Refer to Built-in

627
Current_Row_Fill_Pattern property
Description
Specifies the pattern to be used for the object’s fill region. Patterns are rendered in the two colors
specified by Background_Color and Foreground_Color.
Default
Unspecified
Refer to Built-in

628
Current_Row_Font_Name property
Description
Specifies the font family, or typeface, to be used for text in the object. The list of fonts available is
system-dependent.
Default
NULL
Refer to Built-in

629
Current_Row_Font_Size property
Description
Specifes the size of the font in points.
Default
NULL
Refer to Built-in

630
Current_Row_Font_Spacing property
Description
Specifies the width of the font (i.e., the amount of space between characters, or kerning).
Default
NULL
Refer to Built-in

631
Current_Row_Font_Style property
Description
Specifies the style of the font.
Default
NULL
Refer to Built-in

632
Current_Row_Font_Weight property
Description
Specifies the weight of the font.
Default
NULL
Refer to Built-in

633
Current_Row_Foreground_Color property
Description
Specifies the color of the object’s foreground region. For items, defines the color of the text displayed in
the item.
Default
NULL
Refer to Built-in

634
Current_Row_White_On_Black property
Description
Specifies that the object is to appear on a monochrome bitmap display device as white text on a black
background.
Default
NULL
Refer to Built-in

635
Cursor Mode property
Note:
In Release 5.0 and later, cursor mode is handled automatically by Form Builder. This property is
now obsolete, and should not be used. In particular, cursor mode should never be set to Close. The
following information is provided only for historical and maintenance purposes.
Description
Defines the cursor state across transactions. The cursor refers to the memory work area in which SQL
statements are executed. For more information on cursors, refer to the ORACLE RDBMS Database
Administrator’s Guide. This property is useful for applications running against a non-ORACLE data
source.
The following settings are valid for the Cursor_Mode property:
Setting Description
Open (the default) Specifies that cursors should remain open across
transactions.
Close Specifies that cursors should be closed when a commit
is issued.
Applies to form
Refer to Built-in
Default
OPEN_AT_COMMIT
Usage Notes
• Because ORACLE allows the database state to be maintained across transactions, Form Builder
allows cursors to remain open across COMMIT operations. This reduces overhead for subsequent
execution of the same SQL statement because the cursor does not need to be re-opened and the SQL
statement does not always need to be re-parsed.
• Some non-ORACLE databases do not allow database state to be maintained across transactions.
Therefore, you can specify the CLOSE_AT_COMMIT parameter of the Cursor_Mode option to
satisfy those requirements.
• Closing cursors at commit time and re-opening them at execute time can degrade performance in

636
three areas:
• during the COMMIT operation
• during future execution of other SQL statements against the same records
• during execution of queries
• Form Builder does not explicitly close cursors following commit processing if you set the property
to CLOSE_AT_COMMIT. This setting is primarily a hint to Form Builder that the cursor state can
be undefined after a commit.
Form Builder maintains a transaction ID during all types of transaction processing. For instance, Form
Builder increments the transaction ID each time it opens a cursor, performs a commit, or performs a
rollback.
When Form Builder attempts to re-execute a cursor, it checks the transaction ID. If it is not the current
transaction ID, then Form Builder opens, parses, and executes a new cursor. Only the last transaction
ID is maintained.
• If you query, change data, then commit, Form Builder increments the transaction ID. Subsequent
fetches do not re-open and execute the cursor, for the following reasons:
• Form Builder does not attempt to handle read consistency issues, nor does it handle re-positioning in
the cursor.
• Form Builder expects ORACLE or the connect to return an end-of-fetch error when trying to fetch
from an implicitly closed cursor.
On a subsequent execution of the query, Form Builder opens a new cursor.
• When using this property in conjunction with transactional triggers, you, the designer, must manage
your cursors. For example, you might want to close any open queries on the block whenever you
perform a commit.

637
Cursor_Style property
Description
Specifies the mouse cursor style. Use this property to dynamically change the shape of the cursor.
The following settings are valid for the Cursor Style property:
Setting Description
BUSY Displays a GUI-specific busy symbol.
CROSSHAIR Displays a GUI-specific crosshair symbol.
DEFAULT Displays a GUI-specific arrow symbol.
HELP Displays a GUI-specific help symbol.
INSERTIODisplays a GUI-specific insertion symbol.
Refer to Built-in
• GET_APPLICATION_PROPERTY
• SET_APPLICATION_PROPERTY
Default
Arrow symbol
Usage Notes
When Form Builder is performing a long operation, it displays the "Working" message and replaces any
cursor style specified with the BUSY cursor.
For example, if you set the cursor style to "HELP" and the operator executes a large query, the HELP
cursor is replaced by the BUSY cursor while the query is being executed. After Form Builder executes
the query, the BUSY cursor reverts to the HELP cursor.
Note, however, if you change the cursor style while Form Builder is displaying the BUSY cursor, the
cursor style changes immediately rather than waiting for Form Builder to complete the operation before
changing cursor styles.

638
Custom Spacing property
Description
Specifies the custom spacing for the text object in layout units.
Set Form Builder
Default
0

639
Dash Style property
Description
Specifies the dash style of the graphic object’s edge as Solid, Dotted, Dashed, Dash Dot, Double Dot,
Long dash, or dash Double Dot.
Set Form Builder
Default
Solid

640
Data Block Description property
Description
Describes the data block.
Applies to data block database
Set Form Builder
Default
Null

641
Data Query property
Description
Specifies the query-based data source.
Refer to Built-in
ADD_TREE_DATA
Default
NULL

642
Data Source Data Block (Chart) property
Description
When running Graphics Builder from Form Builder to create a chart, specifies the data block to be used
as the source of a chart item.
Set Form Builder
Default
Null

643
Data Source Data Block (Report) property
Description
For report/form integration, specifies the data block to be used as the source of the report as either Null
or a block name.
Set Form Builder
Default
Null

644
Data Source X Axis property
Description
Specifies the data block column to be used as the basis of the X axis of a chart item.
Set Form Builder

645
Data Source Y Axis property
Description
Specifies the data block column to be used as the basis of the Y axis of a chart item.
Set Form Builder

646
Data Type property
Description
Specifies what kinds of values Form Builder allows as input and how Form Builder displays those
values.
Applies to check box, display item, list item, radio group, text item, custom item, and form parameter
(form parameter supports CHAR, DATE, DATETIME, and NUMBER only)
Note: All data types do not apply to each item type.
Set Form Builder
Usage Notes
• In Form Builder 6.0 and later, it is recommended that you use only the standard data types CHAR,
DATE, DATETIME, and NUMBER for data. These data types are based on native ORACLE data
types, and offer better performance and application portability. The other data types are valid only
for text items, and are included primarily for compatibility with previous versions. You can achieve
the same formatting characteristics by using a standard data type with an appropriate format mask.
• The data type of a base table item must be compatible with the data type of the corresponding
database column. Use the CHAR data type for items that correspond to ORACLE VARCHAR2
database columns.
• Do not create items that correspond to database CHAR columns if those items will be used in
queries or as the join condition for a master-detail relation; use VARCHAR2 database columns
instead.
• Form Builder will perform the following actions on items, as appropriate:
remove any trailing blanks
change the item to NULL if it consists of all blanks
remove leading zeros if the data type is NUMBER, INT, MONEY, RINT, RMONEY, or RNUMBER
(unless the item’s format mask permits leading zeros)
• The form parameter Data Type property supports the data types CHAR, DATE, and NUMBER.
ALPHA
Contains any combination of letters (upper and/or lower case).
Default Null
Example "Employee", "SMITH"
CHAR
Supports VARCHAR2 up to 2000 characters. Contains any combination of the following characters:
• Letters (upper and/or lower case)
• Digits
• Blank spaces

647
• Special characters ($, #, @, and _)
Default Null
Example "100 Main Street", "CHAR_EXAMPLE_2"
DATE
Contains a valid date. You can display a DATE item in any other valid format by changing the item’s
format mask.
Default DD-MON-YY
Restrictions Refers to a DATE column in the database and is processed as a true date, not a
character string.
The DATE data type is not intended to store a time component.
Example 01-JAN-92
DATETIME
Contains a valid date and time.
Default DD-MON-YY HH24:MI[:SS]
character string.
The DATETIME data type contains a four digit year. If the year input to a
DATETIME data type is two digits, the year is interpreted as 00YY.
Example 31-DEC-88 23:59:59
EDATE
Contains a valid European date.
Default DD/MM/YY
Restrictions V3 data type.
Must refer to a NUMBER column in the database.
Included for backward compatibility. Instead, follow these recommendations:
Use the DATE data type.
Apply a format mask to produce the European date format.
Reference a DATE column in the database, rather than a NUMBER column.
Example 23/10/92 (October 23, 1992)
01/06/93 (June 1, 1993)
INT

648
Contains any integer (signed or unsigned whole number).
Default 0
Example 1, 100, -1000
JDATE
Contains a valid Julian date.
Default MM/DD/YY
Apply a format mask to produce the Julian date format.
06/01/93 (June 1, 1993)
LONG
Contains any combination of characters. Stored in ORACLE as variable-length character strings. Forms
allows a LONG field to be up to 65,534 bytes. However, PL/SQL has a maximum of 32,760 bytes. If a
LONG variable is to be used as a bind variable in a PL/SQL statement, it cannot exceed that 32,760 byte
limit.
Default Null
Restrictions Not allowed as a reference in the WHERE or ORDER BY clauses of any SELECT
statement.
LONG items are not queryable in Enter Query mode.
MONEY
Contains a signed or unsigned number to represent a sum of money.
Restrictions V3 data type
Included for backward compatibility. Instead, use a format mask with a number to
produce the same result.
Example 10.95, 0.99, -15.47
NUMBER

649
Contains fixed or floating point numbers, in the range of 1.0x10-129 to 9.99x10124, with one or more of
the following characteristics:
• signed
• unsigned
• containing a decimal point
• in regular notation
• in scientific notation
• up to 38 digits of precision
NUMBER items refer to NUMBER or FLOAT columns in the database, and Form Builder processes
their values as true numbers (not character strings).
Default 0
Restrictions Commas cannot be entered into a number item (e.g., 99,999). Use a format mask
instead.
Example -1, 1, 1.01, 10.001, 1.85E3
RINT
Displays integer values as right-justified.
Use the NUMBER data type.
Apply a format mask such as 999 to produce a right-justified number.
RMONEY
Displays MONEY values as right-justified.
Use the NUMBER data type
Apply a format mask such as $999.99 to produce a right-justified number.
RNUMBER
Displays NUMBER values as right-justified.

650
Apply a format mask such as 999.999 to produce a right-justified number.
TIME
Contains numbers and colons that refer to NUMBER columns in the database.
Default HH24:MI[:SS]
Use the DATETIME data type.
Apply a format mask to produce only the time.
Not allowed as a reference to DATE columns in the database.
Example :10:23:05
21:07:13

651
Data Type (Record Group) property
Description

652
Database Block property
Description
Specifies that the block is based on any of the following block data source types: table, procedure,
transactional trigger, or sub-query. (Table source includes relational tables, object tables, and relational
tables containing column objects or REFs.) Also specifies that the block is not a control block. When
the Database Block property is set to No, form builder grays-out and ignores the datasource properties
for the block.
Applies to block
Set Form Builder
Default
Yes

653
Database_Value property
Description
For a base table item that is part of a database record whose status is QUERY or UPDATE,
Database_Value returns the value that was originally fetched from the database. When a fetched value
has been updated and then subsequently committed, Database_Value returns the committed value.
For a control item that is part of a database record, Database_Value returns the value that was originally
assigned to the item when the record was fetched from the database.
For any item that is part of a non-database record whose status is NEW or INSERT, Database_Value
returns the current value of the item.
Note: You can examine the Database_Value property to determine what the value of an item in a
database record was before it was modified by the end user.
Note: You can examine the SYSTEM.RECORD_STATUS system variable or use the
GET_RECORD_PROPERTY built-in to determine if a record has been queried from the database.
Applies to:
all items except buttons, chart items, and image items
Set not settable
Refer to Built-in:
GET_ITEM_PROPERTY

654
Datasource property
Description
Specifies the name of the database currently in use.
Set not settable
Refer to Built-in
Default
ORACLE
Usage Notes
This property is used in connection with non-Oracle data sources. It returns the name of the database for
connections established by Form Builder, not for connections established by On-Logon triggers. The
following settings are valid for this property:
• ORACLE
• DB2
• NULL (Unspecified database, or not logged on)
• NONSTOP
• TERADATA
• NCR/3600
• NCR/3700
• SQLSERVER
•

655
Date_Format_Compatibility_Mode property
Description
Establishes what date format masks will be used in certain conversion operations. A setting of 4.5
chooses the types of conversions done in Release 4.5 and earlier. A setting of 5.0 chooses the types of
conversions done in Release 5.0 and later.
The conversion operations and masks affected by this choice are noted in About format masks for dates
Set settable from within Form Builder.
Refer to Built-in
Default
5.0
Usage Notes
If this Date_Format_Compatibility_Mode property is set to 4.5 but the Runtime_Compatibility_Mode
property is set to 5.0, the 5.0 value will override the Date_Format_Compatibility_Mode setting.
•

656
Default Alert Button property
Description
Specifies which of three possible alert buttons is to be the default alert button. The default alert button is
normally bordered uniquely or highlighted in some specific manner to visually distinguish it from other
buttons.
Applies to alert
Set Form Builder
Default
Button 1

657
Default Button property
Description
Specifies that the button should be identified as the default button. At runtime, the end user can invoke
the default button by pressing [Select] if focus is within the window that contains the default button.
On some window managers, the default button is bordered or highlighted in a unique fashion to
distinguish it from other buttons in the interface.
Applies to button
Set Form Builder
Default
No

658
Default Font Scaling property
Description
Specifies that the font indicated for use in a form defaults to the relative character scale of the display
device in use.
Set Form Builder
Default
Yes
Default Font Scaling restrictions
Valid only when the Coordinate System property is set to Character Cell.

659
Deferred property
Description
See Coordination.

660
Defer Required Enforcement property
Description
For an item that has the Required property set to true, it specifies whether Form Builder should defer
enforcement of the Required item attribute until the record is validated.
There are three settings for this property: Yes, 4.5, and No.
Applies to form
Refer to Built-in
Default
No
Usage Notes
This property applies only when item-level validation is in effect. By default, when an item has Required
set to true, Form Builder will not allow navigation out of the item until a valid value is entered. This
behavior will be in effect if you set Defer Required Enforcement to No. (An exception is made when the
item instance does not allow end-user update; in this unusual case, a Defer Required Enforcement setting
of No is ignored and item-level validation does not take place.)
If you set Defer Required Enforcement to Yes (PROPERTY_TRUE for runtime) or to 4.5
(PROPERTY_4_5 for runtime), you allow the end user to move freely among the items in the record,
even if they are null, postponing enforcement of the Required attribute until validation occurs at the
record level.
When Defer Required Enforcement is set to Yes, null-valued Required items are not validated when
navigated out of. That is, the WHEN-VALIDATE-ITEM trigger (if any) does not fire, and the item’s
Item Is Valid property is unchanged. If the item value is still null when record-level validation occurs
later, Form Builder will issue an error.
When Defer Required Enforcement is set to 4.5, null-valued Required items are not validated when
navigated out of, and the item’s Item Is Valid property is unchanged. However, the WHEN-VALIDATE-
ITEM trigger (if any) does fire. If it fails (raises Form_trigger_Failure), the item is considered to have
failed validation and Form Builder will issue an error. If the trigger ends normally, processing continues
normally. If the item value is still null when record-level validation occurs later, Form Builder will issue
an error at that time.
Setting a value of 4.5 for Defer Required Enforcement allows you to code logic in a WHEN-
VALIDATE-ITEM trigger that will be executed immediately whenever the end-user changes the item’s
value (even to null) and then navigates out. Such logic might, for example, update the values of other
items. (The name 4.5 for this setting reflects the fact that in Release 4.5, and subsequent releases
running in 4.5 mode, the WHEN-VALIDATE-ITEM trigger always fired during item-level validation.)

661
Delete Allowed property
Description
Specifies whether records can be deleted from the block.
Applies to block
Default
Yes
Refer to Built-in

662
Delete Procedure Arguments property
Description
Specifies the names, datatypes, and values of the arguments that are to be passed to the procedure for
deleting data. The Delete Procedure Arguments property is valid only when the DML Data Target Type
property is set to Procedure.
Applies to block
Set Form Builder
Default
NULL

663
Delete Procedure Name property
Description
Specifies the name of the procedure to be used for deleting data. The Delete Procedure Name property
is valid only when the DML Data Target Type property is set to Procedure.
Applies to block
Set Form Builder
Default
NULL

664
Delete Procedure Result Set Columns property
Description
Specifies the names and the datatypes of the result set columns associated with the procedure for deleting
data. The Delete Procedure Result Set Columns property is valid only when the DML Data Target Type
Applies to block
Set Form Builder
Default
NULL

665
Delete Record Behavior property
Description
(Note : this property was formerly called the Master Deletes property.)
Specifies how the deletion of a record in the master block should affect records in the detail block:
Setting Description
Non-Isolated The default setting. Prevents the deletion of a master record
when associated detail records exist in the database.
Isolated Allows the master record to be deleted and does not affect
associated detail records in the database.
Cascading Allows the master record to be deleted and automatically deletes
any associated detail records in the detail block’s base table at
commit time. In a master-detail-detail relation, where relations
are nested, only records in the immediate detail block are
deleted (deletions do not cascade to multiple levels of a relation
chain automatically).
Applies to relation
Refer to Built-in
Default
Non-Isolated
Delete Record Behavior restrictions
• Setting this property at runtime has no effect for a default master-detail relation. At design time,
Form Builder creates the appropriate triggers to enforce the relation, and changing the Delete
Record Behavior property at runtime does not alter the default trigger text. The ability to set and get
this property programmatically is included only for designers who are coding custom master-detail
coordination.

666
Detail Block property
Description
Specifies the name of the detail block in a master-detail block relation.
Applies to relation
Set Form Builder
Refer to Built-in
GET_RELATION_PROPERTY (Detail_Name)
Default:
NULL
Detail Block restrictions
The block specified must exist in the active form.

667
Detail Reference Item property
Description
Identifies the REF item in the relation’s detail data block that forms the link to the master data block.
This property applies only when the Relation Type property is set to REF.
Applies to Relation
Set Form Builder
Refer to Built-in
Default
Null
Usage Notes
This property applies only when the Relation type property is set to REF

668
Direction property
Description
Note: This property is specific to bidirectional National Language Support (NLS) applications.
Specifies the layout direction for bidirectional objects.
For the purposes of this property, assume that Local refers to languages displayed Right-To-Left, and
Roman refers to languages displayed Left-To-Right.
Direction is an umbrella property that provides as much functionality for each object as possible. For all
objects except text items and display items, the Direction property is the only bidirectional property, and
its setting controls the other aspects of bidirectional function. (List items, however, have both a
Direction property and an Initial Keyboard Direction property.)
The form-level Direction property is the highest level setting of the property. When you accept the
Default setting for the form-level Direction property, the layout direction for the form is inherited from
the natural writing direction specified by the NLS language environment variable.
In most cases, leaving all the other Direction properties set to Default will provide the desired
functionality--that is, the NLS language environment variable layout direction will ripple down to each
subsequent level. You only need to specify the bidirectional properties when you want to override the
inherited default values.
This chart summarizes inheritance for the Direction property.
Default Setting Derives Value
From This Object
Form NLS environment variable
All objects, such as
Alert, Block, LOV,
Window, and Canvas
Form
All items, such as Text
Item, Display Item,
Check Box, Button,
Radio Group, and List
Item
Canvas
This table summarizes the functions controlled by the Direction property for each object type. (Text
items and display items do not have a Direction property; instead, in the Form Builder, you can
specifically set Justification, Reading Order, and Initial Keyboard Direction properties for these items.
However, programmatically, you can get and set the Direction property only for all items, including text
items and display items.)
Layout
Direction
Text
Reading
Text
Alignment
Scrollbar
Position
Initial
Keyboard

669
Order Direction
Form X
Alert X X X
Block(for future
use)
LOV(for future
use)
Window X(of
menu)
X X
Canvas X(also
point of
origin)
X(boilerpla
te text)
X(and
rulers)
Check Box X X X
Button X X X
Radio Group X X X
List Item X X X X
Note: The headings listed above represent functions, not properties: for example, the Direction property
for alerts does not set the Initial Keyboard Direction property, it controls the initial keyboard state
function.
The allowable values for this property are:
Value Description
Default Direction based on the property shown in the table.
Right-To-Left Direction is right-to-left.
Left-To-Right Direction is left-to-right.
Applies to all objects listed in the table
Refer to Built-in
•
• GET_VIEW_PROPERTY

670
• SET_VIEW_PROPERTY
General Usage Notes:
• If you want all items on your form to default to the natural writing direction specified by the
language environment variable, set Language Direction at the Form level to Default, and allow all
other Direction properties to be Default, as well.
• In most cases, the Default setting will provide the functionality you need. Occasionally, however,
you may want to override the default by setting the Direction property for a specific object that
needs to be displayed differently from the higher-level Direction property. For example, you may
want to have most items on a canvas inherit their Direction from the canvas Direction property, but
in the case of a specific text item, you might set the Direction property to override the default.
• If you are developing a bilingual application and need to display both Local and Roman menus,
create a trigger to display the correct version of the menu based on the USER_NLS_LANG property
of the GET_APPLICATION_PROPERTY built-in.
• Follow these guidelines when choosing a Direction property value:
• If you are developing a bilingual application and want to display a Local object in Right-To-Left
mode and a Roman object in Left-To-Right, use the Default value.
• If the object is normally composed of Local text, choose the Right-To-Left value.
• If the object is normally composed of Roman text, choose the Left-To-Right value.
Direction (Alert)
Specifies the layout direction of the alert interface items, including the reading order of the text displayed
within the alert window.
Direction (Button)
Specifies the reading order of button text and the initial keyboard state when the button receives input
focus.
Direction (Canvas)
Specifies the layout direction of the canvas, including:
• layout direction used in the Layout Editor
• point of origin (for Right-to-Left, point of origin is top right corner; for Left-to-Right, point of origin
is top left corner)
• display of rulers and scrollbars
• reading order of boilerplate text
Canvas Usage Notes:
• Refer to the Usage Notes for the form-level Direction property to determine which value to choose.
• To develop an application with blocks laid out in different directions, place each block on a
different canvas. This will provide:
• automatic layout of blocks in the canvas Direction property

671
• boilerplate text reading order will default to the canvas Direction property
• If a block spans multiple canvases, keep the canvas Direction property the same for all canvases,
unless you intend to have part of the block displayed with a different Direction.
• In the Form Builder, if you change the canvas Direction property while the Layout Editor is open,
the change will not take place until you reopen the Layout Editor.
Direction (Check Box)
Specifies the layout direction of a check box, including:
• the position of the box relative to the text
• reading order of check box label
• initial keyboard state when the check box receives input focus
Direction (Form)
Specifies the layout direction of a form. Setting the form-level Direction property to Default lets the
form inherit layout direction from the natural writing direction of the language specified in the NLS
environment variable.
Form Usage Notes:
• If you are developing a bilingual application that must run in both Right-To-Left and Left-To-Right
directions, use the Default value.
• During testing, set Direction to either Right-To-Left or Left-To-Right, to test your form in Local or
Roman direction. Before generating the final executable, return the setting to Default.
• If your application must run in one direction only, choose the corresponding value.
Direction (List Item)
Specifies the layout direction of the list items in both popup lists and combo boxes, including:
• position of the scroll bar
• alignment of list text
• reading order of list text
• initial keyboard state when the list item gains input focus
Direction (Radio Group)
Specifies layout direction of the radio buttons of a group (position of the circle relative to the text),
including:
• reading order of text
• initial keyboard state when the radio group gains input focus
Direction (Windows)
Specifies layout direction of the window object, including:
• layout direction of the menu
• reading order of any text displayed within the window area that is not part of an object that has its
own Direction property (for example, the window title)

672
Display Hint Automatically property
Description
Determines when the help text specified by the item property, Hint, is displayed:
• Set Display Hint Automatically to Yes to have Form Builder display the hint text whenever the input
focus enters the item.
• Set Display Hint Automatically to No to have Form Builder display the hint text only when the input
focus is in the item and the end user presses [Help] or selects the Help command on the default
menu.
Applies to all items except chart item, display item, and custom item
Refer to Built-in
Default
No
Usage Notes
If a trigger causes Form Builder to navigate through several items before stopping at the target item, the
help text does not display for the traversed items, but only for the target item.
Display Hint Automatically restrictions
Not applicable when the Hint property is NULL.

673
Display in ’Keyboard Help’/’Keyboard Text’ property
Description
Specifies whether a key trigger description is displayed in the runtime Keys help screen. An entry in the
Keys screen includes a text description for the key name and the physical keystroke associated with it,
for example, Ctrl-S.
Applies to trigger
Set Form Builder
Default
No
Usage Notes
• If you do not want the name or the description to appear in the Show Keys window, set the Display
Keyboard Help property to No. This is the default setting.
• If you want the name of the key that corresponds to the trigger and its default description to be
displayed in the Keys window, set the Display Keyboard Help property to Yes and leave the
Keyboard Help Text blank.
• If you want to replace the default key description, set the Display Keyboard Help property to Yes,
then enter the desired description in the Keyboard Help Text property.
Display in Keyboard Help restrictions
Valid only for key triggers.

674
Display Quality property
Description
Determines the level of quality used to display an image item, allowing you to control the tradeoff
between image quality and memory/performance.
High Displays the image with high quality, which requires more resources.
Medium Displays the image with medium quality.
Low Displays the image with low quality, which requires fewer resources.
Set Form Builder
Default
High
Display Quality restrictions
none

675
Display Width (LOV) property
Description
See Column Mapping Properties.

676
Display without Privilege property
Description
Determines whether the current menu item is displayed when the current form end user is not a member
of a security role that has access privileges to the item:
• When Display without Privilege is No, Form Builder does not display the item if the end user does
not have access to it.
• When Display without Privilege is Yes, Form Builder displays the item as a disabled (grayed) menu
item. The end user can see the item on the menu, but cannot execute the command associated with
the item.
You can only grant access to members of those roles displayed in the roles list. To add a database role to
this list, set the menu module property, Menu Module Roles. For more information on establishing the
roles list and assigning a role access to menu items, see the Form Builder online help system.
Set Form Builder
Default
No
Display without Privilege restrictions
Valid only when the name of at least one database role has been specified in the roles list.

677
Display_Height property
Description
Specifies the height of the display device, in the units specified by the current setting of the Coordinate
Units form property. Use this property to dynamically calculate the optimum display position for
windows on the screen.
Set not settable
Refer to Built-in

678
Display_Width property
Description
Specifies the width of the display device, in the units specified by the current setting of the Coordinate
Units form property. Use this property to dynamically calculate the optimum display position for
windows on the screen.
Set not settable
Refer to Built-in

679
Displayed property
Descriptiuon
Enables/unhides or deisbles/hides an item. When an itme is disabled and hidden it is not navigable,
queryable, or updateable.
Values: TRUE/FALSE
Applies to: item
Set: programmatically
Usage notes
You should make sure an item is not selected before setting the Displayed property to FALSE. Setting a
selected item’s Diaplayed property to false will generate an error: FRM-41016.
Refer to Built-in
GET_ITEM_PROPERTY
SET_ITEM_PROPERTY
Displayed property restrictions
You cannot set the Displayed property of an item that is selected or has focus.

680
Distance Between Records property
Description
Specifies the amount of space between instances of items in a multi-record block. A multi-record block is
a block that has the Number of Records Displayed property set to greater than 1.
Applies to item
Set Form Builder
Default
0
Usage Notes
If you are working in character cell ruler units, the amount of space between item instances must be at
least as large as the height of a single cell.
For example, to increase the amount of space between item instances in a 5 record item, you must set the
Distance Between Records property to at least 4, one cell for each space between item instances.

681
Dither property
Description
Specifies the whether the image is dithered when it is displayed.
Set Form Builder
Default
No

682
DML Array Size property
Description
Specifies the maximum array size for inserting, updating, and deleting records in the database at one
time.
Applies to block
Set form builder
Default
1
Usage Notes
A larger size reduces transaction processing time by reducing network traffic to the database, but
requires more memory. The optimal size is the number of records a user modifies in one transaction.
DML Array Size restrictions
Minimium number of records is 1; there is no maximum.
• When the DML Array Size is greater than 1 and Insert Allowed is Yes, you must specify one or
more items as a primary key, because you cannot get the ROWID of the records. ROWID is the
default construct ORACLE uses to identify each record. With single record processing, the ROWID
of a record is obtained for future reference (update or delete). During array processing, the ROWID
of each record in the array is not returned, resulting in the need to designate one or more primary
key items in the block. The primary key is used to specify the row to lock, and the ROWID is used
for updating and deleting. BLOCK.ROWID is not available until the record is locked. You should
specify one or more items in the block as the primary key even if the Key Mode value is Unique (the
default).
• When DML Array Size is greater than 1, Update Changed Columns Only is always set to No at
runtime, even if Update Changed Columns Only is Yes in the form builder. Update Changed
Columns Only specifies that only columns whose values are actually changed should be included in
the UPDATE statement during a COMMIT.
• If a long raw item (such as an image, sound or OLE item) appears in the block, the DML Array Size
is always set to 1 at runtime.

683
DML Data Target Name property
Description
Specifies the name of the block’s DML data target. The DML Data Target Name propertyis valid only
when the DML Data Target Type property is set to Table.
Applies to block
Refer to Built-in
Default
NULL
DML Data Target Name restrictions
Prior to setting the DML Data Target Name property you must perform a COMMIT_FORM or a
CLEAR_FORM.

684
DML Data Target Type property
Description
Specifies the block’s DML data target type. A DML data target type can be a Table, Procedure, or
Transactional trigger.
Applies to block
Refer to Built-in
GET_BLOCK_PROPERTY
Default
Table

685
DML Returning Value property
Description
Specifies whether Forms should use new or old behavior when updating client-side data with changed
values after a database update or insert. A Yes setting for this property selects new behavior (new as of
Release 6). A No setting selects old behavior (behavior of Release 5 and earlier).
A database update or insert action may initiate server-side triggers that cause alterations or additional
changes in the data. In Release 6, when using an Oracle8 database server, Forms uses the DML
Returning clause to immediately bring back any such changes. When this property is set to Yes, Forms
will automatically update the client-side version of the data, and the user will not need to re-query the
database to obtain the changed values.
When this property is set to No, Forms will not automatically update the client-side version of the data.
(This is its pre-Release 6 behavior.) In this case, if the user subsequently tries to update a row whose
values were altered on the server side, the user receives a warning message and is asked to re-query to
obtain the latest values. This No setting is available as a compatibility option.
Applies to block
Set Form Builder
Valid values Yes/No
Default No
Restrictions
• Forms uses the DML Returning clause only with an Oracle8 database server. This property is
ignored when using a non-Oracle8 server.
• Forms uses the Returning clause with Insert and Update statements, but (currently) not with Delete
statements.
• Forms does not use the Returning clause when processing LONGs.
• The updating of unchanged columns is controlled by the setting of the Update Changed Columns
Only property, which in turn is affected by the setting of the DML Array Size property.

686
Edge Background Color property
Description
Specifies the background color of the graphic object’s edge.
Applies to graphic font & color
Set Form Builder
Default
Null

687
Edge Foreground Color property
Description
Specifies the foreground color of the graphic object’s edge.
Set Form Builder
Default
Null

688
Edge Pattern property
Description
Specifies the pattern of the graphic object’s edge.
Set Form Builder
Default
Null

689
Editor property
Description
Specifies that one of the following editors should be used as the default editor for this text item:
• a user-named editor that you defined in the form or
• a system editor outside of Form Builder that you specified by setting the SYSTEM_EDITOR
environment variable
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
Default
blank, indicating the default Form Builder editor
Usage Notes
To specify a system editor:
• Define the system editor by setting the FORMS60_EDITOR environment variable.
• Enter the value SYSTEM_EDITOR in the Editor Name field.
Editor restrictions
The editor specified must exist in the active form.

690
Editor X Position, Editor Y Position properties
Description
Specifies the horizontal (x) and vertical (y) coordinates of the upper left corner of the editor relative to
the upper left corner of the window’s content canvas. When you set the Editor property, you can set the
Editor position properties to override the default display coordinates specified for the editor.
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
Default
0, 0; indicating that Form Builder should use the default editor display coordinates, as specified by the
editor Position property.

691
Elements in List property
Description
The Elements in List property group includes the List Item and List Item Value properties.
Applies to list item
Set Form Builder
List Item
Specifies the text label for each element in a list item.
List Item Value
Specifies the value associated with a specific element in a list item.
Default
NULL
Usage Notes
When you leave the List Item Value field blank, the value associated with the element is NULL.
Elements in List restrictions
• Must be unique among values associated with element values.

692
Enabled (Item) property
Description
Determines whether end users can use the mouse to manipulate an item.
On most window managers, Enabled set to No grays out the item.
Applies to all items except buttons, chart items, and display items
Refer to Built-in
Default
Yes
Usage Notes
When Enabled is set to Yes, Keyboard Navigable can be set to Yes or No. When Enabled is No, an item
is always non-Keyboard Navigable. At runtime, when the Enabled property is set to
PROPERTY_FALSE, the Keyboard_Navigable property is also set to PROPERTY_FALSE.
Enabled set to No grays out the item. If you want the item to appear normally so the user can inspect it
but without being able to change it, set the following properties:
Insert Allowed (Item) to No
Update Allowed (Item) to No
Enabled to Yes

693
Enabled (Menu Item) property
Description
Specifies whether the menu item should be displayed as an enabled (normal) item or disabled (grayed)
item.
Refer to Built-in
•
Default
Yes
Enabled (Menu Item) restrictions
You cannot programmatically enable or disable a menu item that is hidden as a result of the following
conditions:
• The menu module Use Security property is Yes.
• The menu item Display without Privilege property is set to No.
• The current end user is not a member of a role that has access to the menu item.

694
Enabled (Tab Page) property
Description
Specifies whether the tab page should be displayed as enabled (normal) or disabled (greyed out).
Applies to tab page
Refer to Built-in
Default
Yes

695
End Angle property
Description
Specifies the ending angle of the arc, using the horizontal axis as an origin.
Set Form Builder
Default
180

696
Enforce Column Security property
Description
Specifies when Form Builder should enforce update privileges on a column-by-column basis for the
block’s base table. If an end user does not have update privileges on a particular column in the base
table, Form Builder makes the corresponding item non-updateable for this end user only, by turning off
the Update Allowed item property at form startup.
The following table describes the effects of the allowable values for this property:
State Effect
Yes Form Builder enforces the update privileges that are defined in the
database for the current end user.
No Form Builder does not enforce the defined update privileges.
Applies to block
Set Form Builder
Refer to Built-in
GET_BLOCK_PROPERTY
Default
No

697
Enforce Primary Key (Block) property
Description
Indicates that any record inserted or updated in the block must have a unique key in order to avoid
committing duplicate rows to the block’s base table.
Applies to block
Refer to Built-in
Default
No
Enforce Primary Key (Block) restrictions
• The Primary Key item property must be set to Yes for one or more items in the block.

698
Enterable property
Description
Specifies whether the block is enterable.
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY
Usage Notes
• A block is enterable when its current record contains an item instance whose Keyboard Navigable
property has an effective value of true. See the Keyboard Navigable property and
SET_ITEM_INSTANCE_PROPERTY built-in for information about effective Keyboard Navigable
values.
•

699
Error_Date/Datetime_Format property
Description
Holds the current error date or datetime format mask established by the environment variable
FORMSnn_ERROR_DATE_FORMAT or FORMSnn_ERROR_DATETIME_FORMAT. Forms uses
these format masks as defaults in its runtime error processing.
There are two separate properties: Error_Date_Format and Error_Datetime_Format.
Set Not settable from within Form Builder.
Refer to Built-in

700
Execution Mode properties
Execution Mode (Chart) property
Execution Mode (Report) property

701
Execution Mode (Chart) property
Description
When running Graphics Builder from Form Builder to create a chart, this property specifies the
execution mode to be used as either Batch or Runtime. Batch mode executes the report or graphic
without user interaction. Runtime mode enables user interaction during the execution.
Applies to chart items
Set Form Builder
Default
Batch

702
Execution Mode (Report) property
Description
For report integration with a form, this property specifies the execution mode of the report as either
Batch or Runtime. Batch mode executes the report or graphic without user interaction. Runtime mode
enables user interaction during the execution.
Applies to report Developer integration
Set Form Builder
Default
Batch

703
Execution Hierarchy property
Description
Specifies how the current trigger code should execute if there is a trigger with the same name defined at a
higher level in the object hierarchy.
Override Specifies that the current trigger fire instead of any trigger by the same
name at any higher scope. This is known as "override parent" behavior.
Before Specifies that the current trigger fire before firing the same trigger at the
next-higher scope. This is known as "fire before parent" behavior.
After Specifies that the current trigger fire after firing the same trigger at the
next-higher scope. This is known as "fire after parent" behavior.
Applies to trigger
Set Form Builder
Default
Override

704
Filename property
Description
Specifies the name of the file where the named object is stored.
Applies to form, report
Set not settable
Refer to Built-in
GET_FORM_PROPERTY
Usage Notes
Filename at the form level corresponds to Current_Form at the application level. Current_Form is
gettable with GET_APPLICATION_PROPERTY.
Filename property restrictions
If two or more forms share the same name, Filename supplies the name of the file where the most
recently-accessed form is stored.

705
Fill property
Description
Specifies the fill shape of the arc as either Pie or Chord. Pie renders the arc from the center point of the
circle described by the arc. Chord renders the arc from a line segment between the arc’s two end points.
Set Form Builder
Default
Pie

706
Fill_Pattern property
Description
Default
Unspecified
Refer to Built-in

707
Filter Before Display property
Description
When Filter Before Display is set to Yes, Form Builder displays a query criteria dialog before displaying
the LOV. End users can enter a value in the query criteria dialog to further restrict the rows that are
returned by the default SELECT statement that populates the LOV’s underlying record group. Form
Builder uses the value entered in the query criteria dialog to construct a WHERE clause for the SELECT
statement. The value is applied to the first column displayed in the LOV. A hidden LOV column is not
displayed.
The WHERE clause constructed by Form Builder appends the wildcard symbol to the value entered by
the end user. For example, if the end user enters 7, the WHERE clause reads LIKE ’7%’ and would
return 7, 712, and 7290.
Keep in mind that once the end user enters a value in the query criteria dialog and the LOV is displayed,
the LOV effectively contains only those rows that correspond to both the the default SELECT statement
and the WHERE clause created by the value in the query criteria dialog. For example, consider an LOV
whose default SELECT statement returns the values FOO, FAR, and BAZ. If the end user enters the
value F or F% in the query criteria dialog, the resulting LOV contains only the values FOO and FAR. If
the user then enters the value B% in the LOV’s selection field, nothing will be returned because BAZ has
already been selected against in the query criteria dialog.
Applies to LOV
Set Form Builder
Default
No
Filter Before Display restrictions
• If the SELECT statement for the LOV's underlying record group joins tables, the name of the first
column displayed in the LOV must be unique among all columns in all joined tables. If it is not, an
error occurs when the end user attempts to use the Filter Before Display feature. For example, when
joining the EMP and DEPT tables, the DEPTNO column would not be unique because it occurs in
both tables. An alternative is to create a view in the database, and assign a unique name to the
column you want end users to reference in the query criteria dialog.
• When a long-list LOV is used for item validation, the query criteria dialog is not displayed so that
LOV validation is transparent to the forms end user. Instead, Form Builder uses the current value of
the text item to construct the WHERE clause used to reduce the size of the list by applying the
wildcard criteria to the first visible column in the LOV.

708
Fire in Enter-Query Mode property
Description
Specifies that the trigger should fire when the form is in Enter-Query mode, as well as in Normal mode.
Applies to trigger
Set Form Builder
Default
no
Usage Notes
Only applicable to the following triggers:
• Key
• On-Error
• On-Message
• When- triggers, except:
• When-Database-Record
• When-Image-Activated
• When-New-Block-Instance
• When-New-Form-Instance
• When-Create-Record
• When-Remove-Record
• When-Validate-Record
• When-Validate-Item

709
First Navigation Block property
Description
Specifies the name of the block to which Form Builder should navigate at form startup and after a
CLEAR_FORM operation. By default, the First_Navigation_Block is the first block in the form’s
commit sequence, as indicated by the sequence of blocks in the Object Navigator. You can set the
First_Navigation_Block property programmatically to specify a different block as the first navigation
block.
Set Form Builder, programmatic
Refer to Built-in
Default
The first block in the form; that is, the block that is listed first in the Object Navigator.
Usage Notes
You can set this property from a When-New-Form-Instance trigger, which fires at form startup, before
Form Builder navigates internally to the first block in the form.

710
First_Block property
Description
Specifies the block that is the first block in the form, as indicated by the sequence of blocks in the Object
Navigator. At startup, Form Builder navigates to the first item in the first block.
Applies to form
Set not settable
Refer to Built-in
GET_FORM_PROPERTY

711
First_Detail_Relation property
Description
Specifies the name of the first master-detail block relation in which the given block is the detail block.
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY
Usage Notes
This property is useful when you are writing your own master-detail coordination scheme. It can be used
in conjunction with the Next_Master_Relation and Next_Detail_Relation properties to traverse a list of
relations.

712
First_Item property
Description
Specifies the item that is the first item in the block, as indicated by the sequence of items in the Object
Navigator. At startup, Form Builder navigates to the first item in the first block.
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY

713
First_Master_Relation property
Description
Specifies the name of the first master-detail block relation in which the given block is the master block.
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY
Usage Notes
This property is useful when you are writing your own master-detail coordination scheme. It can be used
in conjunction with the Next_Master_Relation and Next_Detail_Relation properties to traverse a list of
relations.

714
Fixed Bounding Box property
Description
Specifies whether the text object’s bounding box should remain a fixed size. If this property is set to
Yes, the values of the Width and Height properties determine the size of the bounding box.
Set Form Builder
Default
No

715
Fixed Length (Item) property
Description
When set to Yes, Fixed Length specifies that the item should be considered valid only when it contains
the maximum number of characters allowed. The maximum number of characters allowed is determined
by the Maximum Length property setting.
Refer to Built-in
Default
No
Fixed Length (Item) restrictions
• The Visible and Enabled properties must be set to Yes.
• A text item value of the NUMBER data type cannot contain leading zeroes. Form Builder
automatically removes leading zeroes and interprets the text item as "not filled."

716
Fixed Length (Menu Substitution Parameter) property
Description
When set to Yes, Fixed Length specifies that the parameter should be considered valid only when it
contains the maximum number of characters allowed. The maximum number of characters allowed is
determined by the Maximum Length property setting.
Applies to menu substitution parameter
Set Form Builder
Default
No

717
Flag User Value Too Long property
Description
Specifies how Forms should handle a user-entered value that exceeds the item’s Maximum Length
property.
This property applies only in a 3-tier environment in which the middle tier (the Forms server) specifies a
multi-byte character set other than UTF8.
Default
Property_False (‘FALSE’)
Refer to Built-in
Usage Notes
In a 3-tier, non-UTF8 multi-byte character set environment, it is possible for an end user to type more
bytes into an item than the item’s Maximum Length property specifies.
When the Flag User Value Too Long property has been set or defaulted to FALSE and this situation
arises, then the user’s typed-in value is truncated (on a character boundary) so that its size in bytes does
not exceed the item’s Maximum Length. When item-level validation is performed, the truncated value is
validated. If validation (and any navigational triggers) succeeds, then the end user is allowed to navigate
out of the item. No error or warning message is displayed.
When the Flag User Value Too Long property has been set to TRUE and this situation arises, then the
user’s typed-in value is not truncated. When item-level validation is performed, it will fail (with an error
message indicating that truncation would be necessary). This means that the end user is not allowed to
leave the current validation unit (as specified by the current form’s Validation Unit property).

718
Font_Name property
Description
system-dependent.
Default
Unspecified
Refer to Built-in

719
Font_Size property
Description
Specifes the size of the font in points.
Default
Unspecified
Refer to Built-in

720
Font_Spacing property
Description
Specifies the width of the font (i.e., the amount of space between characters, or kerning). Valid values
are:
FONT_NORMAL
FONT_ULTRADENSE
FONT_EXTRADENSE
FONT_DENSE
FONT_SEMIDENSE
FONT_SEMIEXPAND
FONT_EXPAND
FONT_EXTRAEXPAND
FONT_ULTRAEXPAND
Default
FONT_NORMAL
Refer to Built-in
• GET_VA_PROPERTY
• SET_VA_PROPERTY

721
Font_Style property
Description
Specifies the style of the font. Valid values are:
FONT_PLAIN
FONT_ITALIC
FONT_OBLIQUE
FONT_UNDERLINE
FONT_OUTLINE
FONT_SHADOW
FONT_INVERTED
FONT_OVERSTRIKE
FONT_BLINK
Default
FONT_PLAIN
Refer to Built-in
• GET_VA_PROPERTY
• SET_VA_PROPERTY

722
Font_Weight property
Description
Specifies the weight of the font. Valid values are:
FONT_MEDIUM
FONT_ULTRALIGHT
FONT_EXTRALIGHT
FONT_LIGHT
FONT_DEMILIGHT
FONT_DEMIBOLD
FONT_BOLD
FONT_EXTRABOLD
FONT_ULTRABOLD
Default
FONT_MEDIUM
Refer to Built-in
• GET_VA_PROPERTY
• SET_VA_PROPERTY

723
Foreground_Color property
Description
the item.
Default
Unspecified
Refer to Built-in

724
Form Horizontal Toolbar Canvas property
Description
On Microsoft Windows, specifies the canvas that should be displayed as a horizontal toolbar on the MDI
application window. The canvas specified must have the Canvas Type property set to Horizontal
Toolbar.
Applies to form
Set Form Builder
Default
Null
Form Horizontal Toolbar Canvas restrictions
Valid only on Microsoft Windows. On other platforms, the Form Horizontal Toolbar Canvas property is
ignored and the canvas is mapped to the window indicated by its Window property setting.

725
Form Vertical Toolbar Canvas property
Description
On Microsoft Windows, specifies the toolbar canvas that should be displayed as a vertical toolbar on the
MDI application window. The canvas specified must have the Canvas Type property set to Vertical
Toolbar.
Applies to form
Set Form Builder
Default
Null
Form Vertical Toolbar Canvas restrictions
Valid only on Microsoft Windows. On other platforms, the Form Vertical Toolbar Canvas property is
ignored and the toolbar canvas is mapped to the window indicated by its Window property setting.

726
Index
A
ABORT_QUERY built-in, 6
About Control property, 561
Access Key property, 562
Access preference (Form Builder), 546
ACTIVATE_SERVER, 7
ADD_GROUP_COLUMN built-in, 9
ADD_GROUP_ROW built-in, 12
ADD_LIST_ELEMENT built-in, 14
ADD_OLEARGS, 16
ADD_PARAMETER built-in, 17
ADD_TREE_DATA built-in, 19
ADD_TREE_NODE built-in, 22
Add_Triggers (Form Compiler) options, 515
Alert Style property, 563
Alias property, 564
Allow Empty Branches property, 566
Allow Expansion property, 565
Allow Multi-Line Prompts property, 567
Allow Start-Attached Prompts property, 568
Allow Top-Attached Prompts property, 569
Application Instance property, 570
APPLICATION_PARAMETER built-in, 24
Array (Forms Runtime) option, 493
Arrow Style property, 571
Associated Menus property, 572
asynchronously
Run Modules, 549
Audio Channels property, 573
Automatic Column Width property, 574
Automatic Display property, 575
Automatic Position property, 576
Automatic Query property, 577
Automatic Refresh property, 578
Automatic Select property, 580
Automatic Skip (Item) property, 581
Automatic Skip (LOV) property, 582
B
Background_Color property, 583
Batch (Form Compiler) option, 516
BELL built-in, 25
Bevel property, 584
blanks converted to null, 659
Block Description property, 585
Block_Menu (Forms Runtime) option, 494
BLOCK_MENU built-in, 26
Bottom Title (Editor) property, 586
Bounding Box Scalable property, 587
BREAK built-in, 27
Buffer Records (Forms Runtime) option, 495
Build (Form Compiler) option, 517
Build Before Running option, 543
built-in packages
overview, 1
Builtin_Date_Format property, 588
Button 1 Label
Alert button labels, 590
C
Calculation Mode property, 591
CALL_FORM built-in, 28
CALL_INPUT built-in, 31
CALL_OLE, 32
CALL_OLE_returntype, 33
Calling_Form property, 592
CANCEL_REPORT_OBJECT built-in, 34
Canvas property, 593
Canvas Type property, 594
Cap Style property, 595
Case Insensitive Query property, 596
Case Restriction property, 597
CHAR, 659
Character Cell WD/HT, 598
Chart Subtype property, 600
Chart Type property, 599
Check Box Mapping of Other Values property, 601
CHECK_RECORD_UNIQUENESS built-in, 37
CHECKBOX_CHECKED built-in, 35
Checked property, 602
CLEAR_BLOCK built-in, 38
CLEAR_EOL built-in, 40
CLEAR_FORM built-in, 41
CLEAR_ITEM built-in, 43
CLEAR_LIST built-in, 44
CLEAR_MESSAGE built-in, 46
CLEAR_RECORD built-in, 47
Clip Height property, 603
Clip Width property, 604
Clip X Position property, 605
Clip Y Position property, 606
Close Allowed property, 607
CLOSE_FORM built-in, 48
CLOSE_SERVER, 49
Closed property, 608
Color Mode option, 541
Color Palette option, 542
Column Mapping Properties property, 609
Column Name property, 611
Column Specifications property, 612
Column Title (LOV) property, 614
Column Value (Record Group) property, 615
Command Text property, 616
Command Type property, 617

727
Comments property, 619
COMMIT_FORM built-in, 50
Communication Mode (Chart) property, 620
Communication Mode (Report) property, 621
Compile in Debug Mode, 520
Compile_All (Form Compiler) option, 518
Compress property, 622
Compression Quality property, 623
Conceal Data property, 624
Connect_String property, 625
Console Window property, 626
Control Help property, 627
Control Properties property, 628
CONVERT_OTHER_VALUE built-in, 52
Coordinate System property, 629
Coordination property, 631
Coordination_Status property, 633
COPY built-in, 53
Copy Value from Item property, 634
COPY_REGION built-in, 55
COPY_REPORT_OBJECT_OUTPUT built-in, 56
COUNT_QUERY built-in, 57
CREATE_GROUP built-in, 59
CREATE_GROUP_FROM_QUERY built-in, 61
CREATE_OLEOBJ, 63
CREATE_PARAMETER_LIST built-in, 64
CREATE_QUERIED_RECORD built-in, 66
CREATE_RECORD built-in, 68
CREATE_TIMER built-in, 69
CREATE_VAR, 71
CRT_File (Form Compiler) option, 519
Current Record Visual Attribute Group property, 635
Current_Form property, 636
Current_Form_Name property, 637
Current_Record property, 638
Current_Row_Background_Color property, 639
Current_Row_Fill_Pattern property, 640
Current_Row_Font_Name property, 641
Current_Row_Font_Size property, 642
Current_Row_Font_Spacing property, 643
Current_Row_Font_Style property, 644
Current_Row_Font_Weight property, 645
Current_Row_Foreground_Color property, 646
Current_Row_White_on_Black property, 647
Cursor Mode property, 648
Cursor_Style property, 650
cursors
Optimize SQL Processing option, 503
Optimize Transaction Mode Processing, 504
statistics (Forms Runtime) option), 510
custom item, 379
Custom Spacing property, 651
CUT_REGION built-in, 73
D
Dash Style property, 652
Data Block Description property, 653
Data Query property, 654
Data Source Data Block (Chart) property, 655
Data Source Data Block (Report) property, 656
Data Source X Axis property, 657
Data Source Y Axis property, 658
data synchronization, 700
Data Type (Record Group) property, 664
Data Type property, 659
Data types:, 659
database
logging in to, 490
Database Block property, 665
Database_Value property, 666
Datasource property, 667
DATE, 659, 660, 661, 663
Date_Format_Compatibility_Mode property, 668
DATETIME, 659, 660, 663
DBMS_ERROR_CODE built-in, 74
DBMS_ERROR_TEXT built-in, 76
Debug (Form Compiler) option, 520
Debug Messages (Forms Runtime) option, 497
Debug Mode (Runtime option), 496
DEBUG_MODE built-in, 78
Default Alert Button property, 669
Default Button property, 670
Default Font Scaling property, 671
DEFAULT_VALUE built-in, 79
Defer Required Enforcement property, 673
Deferred property, 672
Delete (Form Compiler) option, 521
Delete Allowed property, 675
Delete Procedure Arguments property, 676
Delete Procedure Name property, 677
Delete Procedure Result Set Columns property, 678
Delete Record Behavior property, 679
DELETE_GROUP built-in, 80
DELETE_GROUP_ROW built-in, 81
DELETE_LIST_ELEMENT built-in, 83
DELETE_PARAMETER built-in, 85
DELETE_RECORD built-in, 86
DELETE_TIMER built-in, 88
DELETE_TREE_NODE built-in, 90
DESTROY_PARAMETER_LIST built-in, 92
DESTROY_VARIANT, 93
Detail Block property, 680
Detail Reference Item property, 681
Direction property, 682, 683, 684, 685, 686
DISPATCH_EVENT built-in, 94
Display Block Menu preference, 494
Display Hint Automatically property, 687
Display in Keyboard Help property, 688
Display Quality property, 689
Display Screen to Specify Logon option, 502
Display Width (LOV) property, 690
Display without Privilege property, 691
DISPLAY_ERROR built-in, 95
Display_Height property, 692
DISPLAY_ITEM built-in, 96
Display_Width property, 693
Distance Between Records property, 695
Dither property, 696
DML Array Size property, 697
DML Data Target Name property, 698
DML Data Target Type property, 699

728
DML Returning Value property, 700
DO_KEY built-in, 99
DOWN built-in, 98
DUMMY_REFERENCE built-in, 101
DUPLICATE_ITEM built-in, 102
DUPLICATE_RECORD built-in, 103
E
Edge Background Color property, 701
Edge Foreground Color property, 702
Edge Pattern property, 703
EDIT_TEXTITEM built-in, 104
Editor property, 704
Editor X Position
Editor Y Position, 705
Elements in List property, 706
Enabled (Item) property, 707
Enabled (Menu Item) property, 708
Enabled (Tab Page) property, 709
End Angle property, 710
Enforce Column Security property, 711
Enforce Primary Key (Block) property, 712
ENFORCE_COLUMN_SECURITY built-in, 106
ENTER built-in, 107
ENTER_QUERY built-in, 108
Enterable property, 713
ERASE built-in, 110
ERROR_CODE built-in, 111
Error_Date/Datetime_Format property, 714
ERROR_TEXT built-in, 112
ERROR_TYPE built-in, 113
EXEC_VERB, 115
EXECUTE_QUERY built-in, 117
EXECUTE_TRIGGER built-in, 119
Execution Hierarchy property, 718
Execution Mode (Chart) property, 716
Execution Mode (Report) property, 717
EXIT_FORM built-in, 121
expired password, 490
Extract (Form Compiler) option, 522
F
FETCH_RECORDS built-in, 123
Filename property, 719
files
Fill property, 720
Fill_Pattern property, 721
Filter Before Display property, 722
FIND_ALERT built-in, 125
FIND_BLOCK built-in, 127
FIND_CANVAS built-in, 128
FIND_COLUMN built-in, 129
FIND_EDITOR built-in, 130
FIND_FORM built-in, 131
FIND_GROUP built-in, 132
FIND_ITEM built-in, 133
FIND_LOV built-in, 134
FIND_MENU_ITEM built-in, 135
FIND_OLE_VERB, 136
FIND_RELATION built-in, 138
FIND_REPORT_OBJECT built-in, 139
FIND_TAB_PAGE built-in, 140
FIND_TIMER built-in, 141
FIND_TREE_NODE built-in, 142
FIND_VA built-in, 144
FIND_VIEW built-in, 145
FIND_WINDOW built-in, 146
Fire in Enter-Query Mode, 723
First Navigation Block property, 724
First_Block property, 725
First_Detail_Relation property, 726
First_Item property, 727
First_Master_Relation property, 728
FIRST_RECORD built-in, 147
Fixed Bounding Box property, 729
Fixed Length (Item) property, 730
Fixed Length (Menu Substitution Parameter)
property), 731
Flag User Value Too Long property, 732
Font_Name property, 733
Font_Size property, 734
Font_Spacing property, 735
Font_Style property, 736
Font_Weight property, 737
Foreground_Color property, 738
Form Builder options
setting, 539
Form Builder preferences, 491
Form Compiler options
setting Form Compiler options, 513
Form Compiler options:, 513
Form Horizontal Toolbar Canvas property, 739
Form Vertical Toolbar Canvas property, 740
FORM_FAILURE built-in, 148
FORM_FATAL built-in, 150
FORM_SUCCESS built-in, 152
Forms Runtime
starting, 486
FORMS_DDL built-in, 154
FORMS_OLE.SERVER_ACTIVE, 365
G
GENERATE_SEQUENCE_NUMBER built-in, 158
GET_APPLICATION_PROPERTY built-in, 159
GET_BLOCK_PROPERTY built-in, 163
GET_CANVAS_PROPERTY built-in, 169
GET_CUSTOM_PROPERTY built-in, 171
GET_FILE_NAME built-in, 172
GET_FORM_PROPERTY built-in, 174
GET_GROUP_CHAR_CELL built-in, 178
GET_GROUP_DATE_CELL built-in, 181
GET_GROUP_NUMBER_CELL built-in, 183
GET_GROUP_RECORD_NUMBER built-in, 185
GET_GROUP_ROW_COUNT built-in, 187
GET_GROUP_SELECTION built-in, 188
GET_GROUP_SELECTION_COUNT built-in, 190
GET_INTERFACE_POINTER, 191
GET_ITEM_INSTANCE_PROPERTY built-in, 192

729
GET_ITEM_PROPERTY built-in, 194
GET_LIST_ELEMENT_COUNT built-in, 204
GET_LIST_ELEMENT_LABEL built-in, 206
GET_LIST_ELEMENT_VALUE built-in, 207
GET_LOV_PROPERTY built-in, 208
GET_MENU_ITEM_PROPERTY built-in, 210
GET_MESSAGE built-in, 212
GET_OLE_proptype, 213
GET_OLEARG_type, 214
GET_PARAMETER_ATTR built-in, 216
GET_PARAMETER_LIST built-in, 217
GET_RADIO_BUTTON_PROPERTY built-in, 218
GET_RECORD_PROPERTY built-in, 221
GET_RELATION_PROPERTY built-in, 224
GET_REPORT_OBJECT_PROPERTY built-in, 226
GET_TAB_PAGE_PROPERTY built-in, 228
GET_TREE_NODE_PARENT built-in, 230
GET_TREE_NODE_PROPERTY built-in, 232
GET_TREE_PROPERTY built-in, 234
GET_TREE_SELECTION built-in, 236
GET_VA_PROPERTY built-in, 238
GET_VAR_BOUNDS, 240
GET_VAR_DIMS, 241
GET_VAR_TYPE, 242
GET_VERB_COUNT, 243
GET_VERB_NAME, 245
GET_VIEW_PROPERTY built-in, 246
GET_WINDOW_PROPERTY built-in, 248
GET-OLE-MEMBERID, 215
GO_BLOCK built-in, 250
GO_FORM built-in, 251
GO_ITEM built-in, 252
GO_RECORD built-in, 253
H
handles (Object IDs), 1
Help (Form Builder) option, 544
Help (Form Compiler) option, 523
Help (Forms Runtime) option, 498
HELP built-in, 254
HIDE_MENU built-in, 255
HIDE_VIEW built-in, 256
HIDE_WINDOW built-in, 257
HOST built-in, 259
HTML File Name, 545
I
ID_NULL built-in, 261
IMAGE_SCROLL built-in, 263
IMAGE_ZOOM built-in, 264
INIT_OLEARGS, 266
INITIALIZE_CONTAINER, 267
Insert (Form Compiler) option, 524
INSERT_RECORD built-in, 268
Interactive (Forms Runtime) option, 499
ISSUE_ROLLBACK built-in, 269
ISSUE_SAVEPOINT built-in, 271
ITEM_ENABLED built-in, 273
K
Keyboard Text property, 688
Keyin (Forms Runtime) option, 500
Keyout (Forms Runtime) option, 501
L
LAST_OLE_ERROR, 274
LAST_OLE_EXCEPTION, 275
LAST_RECORD built-in, 276
LIST_VALUES built-in, 277
LOCK_RECORD built-in, 278
logging in to the database, 490
login to the database, 490
Logon (Form Compiler) option, 525
LOGON built-in, 279
Logon_Screen (Forms Runtime) option, 502
LOGON_SCREEN built-in, 281
LOGOUT built-in, 283
M
Master Deletes property, 679
MENU_CLEAR_FIELD built-in, 284
MENU_NEXT_FIELD built-in, 285
MENU_PARAMETER built-in, 286
MENU_PREVIOUS_FIELD built-in, 287
MENU_REDISPLAY built-in, 288
MENU_SHOW_KEYS built-in, 289
MESSAGE built-in, 290
MESSAGE_CODE built-in, 292
MESSAGE_TEXT built-in, 293
MESSAGE_TYPE built-in, 294
modifying
properties, 559
Module Access (Form Builder) preference, 546
Module_Access (Form Compiler) option, 526
Module_Type (Form Builder) option, 547
Module_Type (Form Compiler) option, 527
MOVE_WINDOW built-in, 296
N
NAME_IN built-in, 298
names
NEW_FORM built-in, 302
NewTopic 1, 381
NEXT_BLOCK built-in, 305
NEXT_FORM built-in, 306
NEXT_ITEM built-in, 307
NEXT_KEY built-in, 308
NEXT_MENU_ITEM built-in, 309
NEXT_RECORD built-in, 310
NEXT_SET built-in, 311
Nofail (Form Compiler) option, 528
null
blanks converted to, 659
NUMBER, 659, 660, 661, 662, 663

730
O
object ID, 1
object name aliases, 564
OLEVAR_EMPTY, 312
OPEN_FORM built-in, 314
Optimize SQL Processing (Forms Runtime)
preference, 503
Optimize Transaction Mode Processing (Forms
Runtime), 504
Optimize V2-Style Trigger Step SQL Processing, 503
options, 491, 492
Forms Runtime options, 491
preference file, 556
setting Form Builder options, 539
setting Form Compiler options, 513
Options_Screen (Form Compiler) option, 529
Options_Screen (Forms Runtime) option, 505
Oracle Terminal Resource File option, 511
Output_File (Form Compiler) option, 530
Output_File (Forms Runtime) option, 506
P
Palette option, 542
Parse (Form Compiler) option, 531
password, 490
PASTE_REGION built-in, 316
PAUSE built-in, 317
PECS (Forms Runtime) option, 507
PLAY_SOUND built-in, 318
POPULATE_GROUP built-in, 319
POPULATE_GROUP_FROM_TREE built-in, 320
POPULATE_GROUP_WITH_QUERY built-in, 322
POPULATE_LIST built-in, 324
POPULATE_TREE built-in, 326
POST built-in, 327
preferences
Form Builder options, 539
user preference file, 556
PREVIOUS_BLOCK built-in, 329
PREVIOUS_FORM built-in, 330
PREVIOUS_ITEM built-in, 331
PREVIOUS_MENU built-in, 332
PREVIOUS_MENU_ITEM built-in, 333
PREVIOUS_RECORD built-in, 334
PRINT built-in, 335
Printer option, 548
properties
Cursor Mode, 648
modifying, 559
overview, 559
reading property descriptions, 560
setting and modifying, 559
properties:, 648
PTR_TO_VAR, 336
Q
qualifying table names, 564
Query Only (Forms Runtime) option, 508
QUERY_PARAMETER built-in, 337
Quiet (Forms Runtime) option, 509
R
Read Input Keystrokes from File option, 500
READ_IMAGE_FILE built-in, 339
READ_SOUND_FILE built-in, 341
RECALCULATE built-in, 343
REDISPLAY built-in, 344
RELEASE_OBJ, 345
REPLACE_CONTENT_VIEW built-in, 346
REPLACE_MENU built-in, 348
REPORT_OBJECT_STATUS built-in, 350
re-querying, 700
RESET_GROUP_SELECTION built-in, 351
RESIZE_WINDOW built-in, 352
restricted built-in subprograms, 1
RETRIEVE_LIST built-in, 354
Returning clause in DML usage, 700
Rollbacks, 42
Run in Query Only Mode, 508
Run in Quiet Mode, 509
Run Modules Asynchronously option, 549
RUN_PRODUCT built-in, 355
RUN_REPORT_OBJECT built-in, 358
runtime, 491, 492
runtime:, 491
Runtime_Compatibility_Mode property, 668
S
Save Before Building option, 550
Script (Form Compiler) option, 532
SCROLL_DOWN built-in, 359
SCROLL_UP built-in, 360
SCROLL_VIEW built-in, 361
SELECT_ALL built-in, 363
SELECT_RECORDS built-in, 364
server-side data changes, 700
SET_ALERT_BUTTON_PROPERTY built-in, 367
SET_ALERT_PROPERTY built-in, 368
SET_APPLICATION_PROPERTY built-in, 370
SET_BLOCK_PROPERTY built-in, 371
SET_CANVAS_PROPERTY built-in, 376
SET_CUSTOM_ITEM_PROPERTY built-in, 379
SET_CUSTOM_PROPERTY built-in, 380
SET_FORM_PROPERTY built-in, 382
SET_GROUP_CHAR_CELL built-in, 386
SET_GROUP_DATE_CELL built-in, 387
SET_GROUP_NUMBER_CELL built-in, 389
SET_GROUP_SELECTION built-in, 390
SET_INPUT_FOCUS built-in, 391
SET_ITEM_INSTANCE_PROPERTY built-in, 392
SET_ITEM_PROPERTY built-in, 403, 404
SET_LOV_COLUMN_PROPERTY built-in, 407
SET_LOV_PROPERTY built-in, 408
SET_MENU_ITEM_PROPERTY built-in, 410
SET_OLE, 412
SET_PARAMETER_ATTR built-in, 413
SET_RADIO_BUTTON_PROPERTY built-in, 414

731
SET_RECORD_PROPERTY built-in, 417
SET_RELATION_PROPERTY built-in, 419
SET_REPORT_OBJECT_PROPERTY built-in, 421
SET_TAB_PAGE_PROPERTY built-in, 423
SET_TIMER built-in, 425
SET_TREE_NODE_PROPERTY built-in, 427
SET_TREE_PROPERTY built-in, 429
SET_TREE_SELECTION built-in, 432
SET_VA_PROPERTY built-in, 434
SET_VAR, 436, 437
SET_VIEW_PROPERTY built-in, 438
SET_WINDOW_PROPERTY built-in, 440
setting
Form Builder options, 539
Form Compiler options, 513, 514
properties, 559
Show Help Information option, 498
Show Statistics, 510
SHOW_ALERT built-in, 444
SHOW_EDITOR built-in, 445
SHOW_KEYS built-in, 448
SHOW_LOV built-in, 449
SHOW_MENU built-in, 451
SHOW_VIEW built-in, 452
SHOW_WINDOW built-in, 453
SQL Processing
Optimize SQL Porcessing (Forms Runtime)
preference, 503
Statistics (Form Compiler) option, 533
Statistics (Forms Runtime) option, 510
Strip_Source (Form Compiler) option, 534
Subclassing Path, 551
Suppress Hints option, 552
SYNCHRONIZE built-in, 454
synchronously
Run Modules, 549
T
table name qualification, 564
Term (Form Builder) option, 553
Term (Forms Runtime) option, 511
TERMINATE built-in, 455
time (as part of DATETIME), 659
TO_VARIANT built-in, 456
triggers
Add_Triggers Form Compiler option, 515
Optimizing V2-style triggers, 503
truncation, 732
of user-entered value, 732
tuning applications
Optimize transaction mode processing preference,
504
OptimizeSQL option, 503
tuning applications:, 503
U
unrestricted built-in subprograms, 1
UNSET_GROUP_SELECTION built-in, 458
UP built-in, 459
UPDATE_CHART built-in, 460
UPDATE_RECORD built-in, 461
Upgrade (Form Compiler) option, 535
Upgrade_Roles (Form Compiler) option, 536
Use System Editor option, 555
user preference file option, 556
USER_EXIT built-in, 462
userid, 490
USESDI (Forms Runtime) option, 554
V
VALIDATE built-in, 464
VAR_TO_CHAR, 468
VAR_TO_NUMBER
VAR_TO_OBJ, 468
VAR_TO_TABLE, 467
VAR_TO_type, 468
VAR_TO_VARPTR, 469
VARPTR_TO_VAR, 466
VBX.FIRE_EVENT, 470
VBX.GET_PROPERTY, 472
VBX.GET_VALUE_PROPERTY, 474
VBX.INVOKE_METHOD, 475
VBX.SET_PROPERTY, 476
VBX.SET_VALUE_PROPERTY, 478
Version (Form Compiler) option, 537
visual attributes
Oracle Terminal Resource File option, 511
W
Web Runtime options, 491
WEB.SHOW_DOCUMENT, 479
Webforms, 554
USESDI option, 554
Welcome Dialog preference (Form Builder), 557
Welcome Pages, 558
WHERE_DISPLAY built-in, 480
Widen_Fields (Form Compiler) option, 538
Window_State (Forms Runtime) option, 512
Write Input Keystrokes to File option, 501
Write Output to Display option, 499
Write Output to File option, 506
WRITE_IMAGE_FILE built-in, 481
WRITE_SOUND_FILE built-in, 483

Oracle®
Forms Developer
Form Builder Reference, Volume 2
Release 6i
January, 2000
Part No: A73074-01

Volume 2
Part No: A73074-01
Copyright © 1999, Oracle Corporation. All rights reserved.
Contributors: Fred Bethke, Joan Carter, Ken Chu, Kate Dumont, Tom Haunert, Colleen McCann, Leanne
Soylemez, Poh Lee Tan, Tony Wolfram
The programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently
dangerous applications. It shall be the licensee’s responsibility to take all appropriate fail-safe, backup,
redundancy, and other measures to ensure the safe use of such applications if the programs are used for such
purposes, and Oracle Corporation disclaims liability for any damages caused by such use of the programs.
The programs (which include both the software and documentation) contain proprietary information of Oracle
Corporation; they are provided under a license agreement containing restrictions on use and disclosure and are
also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering,
disassembly, or decompilation of the programs is prohibited.
The information contained in this document is subject to change without notice. If you find any problems in the
documentation, please report them to us in writing. Oracle Corporation does not warrant that this document is
error free. Except as may be expressly permitted in your license agreement for these programs, no part of these
programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of Oracle Corporation.
If the programs are delivered to the U.S. Government or anyone licensing or using the programs on behalf of
the U.S. Government, the following notice is applicable:
Restricted Rights Notice Programs delivered subject to the DOD FAR Supplement are "commercial computer
software" and use, duplication, and disclosure of the programs, including documentation, shall be subject to the
licensing restrictions set forth in the applicable Oracle license agreement. Otherwise, programs delivered
subject to the Federal Acquisition Regulations are "restricted computer software" and use, duplication, and
disclosure of the programs shall be subject to the restrictions in FAR 52.227-19, Commercial Computer
Software - Restricted Rights (June, 1987). Oracle Corporation, 500 Oracle Parkway, Redwood City, CA 94065.
Oracle is a registered trademark, and JDeveloper, JInitiator, Oracle7, Oracle8, Oracle8i, and PL/SQL are
trademarks or registered trademarks of Oracle Corporation. All other company or product names mentioned are
used for identification purposes only and may be trademarks of their respective owners.

i
Table of Contents
TABLE OF CONTENTS ..................................................................................................I
SEND US YOUR COMMENTS....................................................................................XI
PREFACE.....................................................................................................................XIII
PROPERTIES (CONTINUED)....................................................................................... 1
Format Mask property.............................................................................................................................1
Form_Name property..............................................................................................................................8
Formula property ....................................................................................................................................9
Frame Alignment property....................................................................................................................10
Frame Title property .............................................................................................................................11
Frame Title Alignment property............................................................................................................12
Frame Title Background Color property...............................................................................................13
Frame Title Font Name property...........................................................................................................14
Frame Title Font Size property .............................................................................................................15
Frame Title Font Spacing property .......................................................................................................16
Frame Title Font Style property............................................................................................................17
Frame Title Font Weight property ........................................................................................................18
Frame Title Foreground Color property................................................................................................19
Frame Title Offset property ..................................................................................................................20
Frame Title Reading Order property.....................................................................................................21
Frame Title Spacing property................................................................................................................22
Frame Title Visual Attribute Group property........................................................................................23
Graphics Type property ........................................................................................................................25
Group_Name property ..........................................................................................................................26
Help property ........................................................................................................................................27
Hide on Exit property............................................................................................................................28
Highest Allowed Value/Lowest Allowed Value property.....................................................................29
Hint (Item) property..............................................................................................................................30
Hint (Menu Item) property....................................................................................................................31
Hint (Menu Substitution Parameter) property.......................................................................................32
Horizontal Justification property...........................................................................................................33
Horizontal Margin property ..................................................................................................................34
Horizontal Object Offset property ........................................................................................................35
Horizontal Origin property....................................................................................................................36
Horizontal Toolbar Canvas property.....................................................................................................37
Icon Filename property .........................................................................................................................38
Icon in Menu property...........................................................................................................................39
Iconic property......................................................................................................................................40
Image Depth property ...........................................................................................................................41
Image Format property..........................................................................................................................42
Implementation Class property .............................................................................................................43
Include REF Item property....................................................................................................................44

ii
Inherit Menu property ...........................................................................................................................45
Initial Keyboard State property.............................................................................................................46
Initial Menu property ............................................................................................................................47
Initial Value (Item) property .................................................................................................................48
Insert Allowed (Block) property ...........................................................................................................50
Insert Allowed (Item) property .............................................................................................................51
Insert Procedure Arguments property ...................................................................................................53
Insert Procedure Name property ...........................................................................................................54
Insert Procedure Result Set Columns property .....................................................................................55
Interaction Mode property ....................................................................................................................56
Isolation Mode property........................................................................................................................57
Item Roles property...............................................................................................................................58
Item Type property ...............................................................................................................................59
Item_Is_Valid property.........................................................................................................................60
Item_Tab_Page property.......................................................................................................................61
Join Condition property ........................................................................................................................62
Join Style property ................................................................................................................................63
Justification property.............................................................................................................................64
Keep Cursor Position property..............................................................................................................66
Key Mode property...............................................................................................................................67
Keyboard Accelerator property.............................................................................................................69
Keyboard Help Description property ....................................................................................................70
Keyboard Navigable property...............................................................................................................71
Keyboard State property .......................................................................................................................72
Label (Item) property............................................................................................................................73
Label (Menu Item) property..................................................................................................................74
Label (Menu Substitution Parameter) property.....................................................................................75
Label (Tab Page) property ....................................................................................................................76
Last_Block property..............................................................................................................................77
Last_Item property................................................................................................................................78
Last_Query property .............................................................................................................................79
Layout Data Block property..................................................................................................................80
Layout Style property............................................................................................................................81
Length (Record Group) property ..........................................................................................................82
Line Spacing property...........................................................................................................................83
Line Width property..............................................................................................................................84
List Item Value property.......................................................................................................................85
List of Values property .........................................................................................................................86
List Style property.................................................................................................................................87
List Type property.................................................................................................................................88
List X Position property........................................................................................................................89
List Y Position property........................................................................................................................90
Listed in Data Block Menu/Data Block Description.............................................................................91
Lock Procedure Arguments property ....................................................................................................92
Lock Procedure Name property ............................................................................................................93
Lock Procedure Result Set Columns property ......................................................................................94
Lock Record property ...........................................................................................................................95
Locking Mode property ........................................................................................................................96
Magic Item property..............................................................................................................................97
Main Menu property .............................................................................................................................99
Mapping of Other Values property .....................................................................................................100
Maximize Allowed property ...............................................................................................................101
Maximum Length property .................................................................................................................102
Maximum Length (Form Parameter) property....................................................................................103
Maximum Length (Menu Substitution Parameter) property ...............................................................104

iii
Maximum Objects Per Line property..................................................................................................105
Maximum Query Time property .........................................................................................................106
Maximum Records Fetched property..................................................................................................107
Menu Description property .................................................................................................................108
Menu Directory property ....................................................................................................................109
Menu Filename property.....................................................................................................................110
Menu Item Code property...................................................................................................................111
Menu Item Radio Group property.......................................................................................................112
Menu Item Type property ...................................................................................................................113
Menu Module property .......................................................................................................................115
Menu Role property ............................................................................................................................116
Menu Source property.........................................................................................................................117
Menu Style property............................................................................................................................119
Message property................................................................................................................................120
Minimize Allowed property................................................................................................................121
Minimized Title property....................................................................................................................122
Modal property ...................................................................................................................................123
Module_NLS_Lang property..............................................................................................................124
Module Roles property .......................................................................................................................125
Mouse Navigate property....................................................................................................................126
Mouse Navigation Limit property.......................................................................................................127
Move Allowed property......................................................................................................................128
Multi-Line property.............................................................................................................................129
Multi-Selection property.....................................................................................................................130
Name property ....................................................................................................................................131
Navigation Style property ...................................................................................................................133
Next Navigation Block property .........................................................................................................134
Next Navigation Item property ...........................................................................................................135
NextBlock property.............................................................................................................................136
NextItem property...............................................................................................................................137
Next_Detail_Relation property ...........................................................................................................138
Next_Master_Relation property..........................................................................................................139
Number of Items Displayed property..................................................................................................140
Number of Records Buffered property................................................................................................141
Number of Records Displayed property..............................................................................................142
OLE Activation Style property ...........................................................................................................143
OLE Class property.............................................................................................................................144
OLE In-place Activation property.......................................................................................................145
OLE Inside-Out Support property.......................................................................................................146
OLE Popup Menu Items property.......................................................................................................147
OLE Resize Style property..................................................................................................................150
OLE Tenant Aspect property ..............................................................................................................151
OLE Tenant Types property ...............................................................................................................152
Operating_System property.................................................................................................................153
Optimizer Hint property......................................................................................................................154
Order By property...............................................................................................................................155
Other Reports Parameters property.....................................................................................................156
Output_Date/Datetime_Format property ............................................................................................157
Parameter Data Type property ............................................................................................................158
Parameter Initial Value (Form Parameter) property............................................................................163
Menu Parameter Initial Value (Menu Substitution Parameter) property.............................................164
Password property...............................................................................................................................165
PLSQL_Date_Format property...........................................................................................................166
PL/SQL Library Location property.....................................................................................................167
PL/SQL Library Source property........................................................................................................168

iv
Popup Menu property .........................................................................................................................169
Precompute Summaries property ........................................................................................................170
Prevent Masterless Operations property .............................................................................................171
Previous Navigation Block property...................................................................................................172
Previous Navigation Item property .....................................................................................................173
PreviousBlock property ......................................................................................................................174
PreviousItem property.........................................................................................................................175
Primary Canvas property.....................................................................................................................176
Primary Key (Item) property...............................................................................................................177
Program Unit Text property................................................................................................................178
Prompt property ..................................................................................................................................179
Prompt Alignment property ................................................................................................................180
Prompt Alignment Offset property......................................................................................................181
Prompt Attachment Edge property......................................................................................................182
Prompt Attachment Offset property....................................................................................................183
Prompt Background Color property....................................................................................................184
Prompt Display Style property............................................................................................................185
Prompt Fill Pattern property ...............................................................................................................186
Prompt Font Name property................................................................................................................187
Prompt Font Size property ..................................................................................................................188
Prompt Font Spacing property ............................................................................................................189
Prompt Font Style property.................................................................................................................190
Prompt Font Weight property .............................................................................................................191
Prompt Foreground Color property.....................................................................................................192
Prompt Justification property..............................................................................................................193
Prompt Reading Order property..........................................................................................................194
Prompt Visual Attribute Group property ............................................................................................195
Prompt_White_On_Black property ....................................................................................................196
Property Class property.......................................................................................................................197
Query All Records property................................................................................................................198
Query Allowed (Block) property ........................................................................................................199
Query Allowed (Item) property...........................................................................................................200
Query Array Size property..................................................................................................................201
Query Data Source Arguments property.............................................................................................202
Query Data Source Columns property ................................................................................................203
Query Data Source Name property .....................................................................................................204
Query Data Source Type property ......................................................................................................205
Query Length property........................................................................................................................206
Query Name property..........................................................................................................................207
Query Only property...........................................................................................................................208
Query_Hits property ...........................................................................................................................209
Query_Options property .....................................................................................................................210
Radio Button Value Property..............................................................................................................211
Raise on Entry property ......................................................................................................................212
Reading Order property ......................................................................................................................213
Real Unit property...............................................................................................................................214
Record Group property .......................................................................................................................215
Record Group Fetch Size property......................................................................................................216
Record Group Query property ............................................................................................................217
Record Group Type property ..............................................................................................................218
Record Orientation property ...............................................................................................................219
Records_to_Fetch property.................................................................................................................220
Relation Type property .......................................................................................................................222
Rendered property...............................................................................................................................223
Report Destination Format property ...................................................................................................224

v
Report Destination Name property .....................................................................................................225
Report Destination Type property.......................................................................................................226
Report Server property........................................................................................................................227
Required (Item) property ....................................................................................................................228
Required (Menu Parameter) property .................................................................................................229
Resize Allowed property.....................................................................................................................230
Return Item (LOV) property ...............................................................................................................231
Rotation Angle property......................................................................................................................232
Runtime Compatibility Mode property...............................................................................................233
Savepoint Mode property....................................................................................................................234
Savepoint_Name property...................................................................................................................235
Scroll Bar Alignment property............................................................................................................236
Scroll Bar Height property..................................................................................................................237
Scroll Bar Width property...................................................................................................................238
Secure (Menu Parameter) property .....................................................................................................239
Share Library with Form property.......................................................................................................240
Show Fast Forward Button property ...................................................................................................241
Show Horizontal Scroll Bar property..................................................................................................242
Show Lines property...........................................................................................................................243
Show OLE Popup Menu property.......................................................................................................244
Show OLE Tenant Type property.......................................................................................................245
Show Palette property.........................................................................................................................246
Show Play Button property.................................................................................................................247
Show Record Button property.............................................................................................................248
Show Rewind Button property............................................................................................................249
Show Scroll Bar property....................................................................................................................250
Show Slider property ..........................................................................................................................252
Show Symbols property......................................................................................................................253
Show Time Indicator property ............................................................................................................254
Show Vertical Scroll Bar property......................................................................................................255
Show Volume Control property..........................................................................................................256
Shrinkwrap property ...........................................................................................................................257
Single Object Alignment property ......................................................................................................258
Single Record property .......................................................................................................................259
Size property.......................................................................................................................................260
Sizing Style property...........................................................................................................................262
Sound Format property .......................................................................................................................263
Sound Quality property.......................................................................................................................264
Start Angle property............................................................................................................................265
Start Prompt Alignment property........................................................................................................266
Start Prompt Offset property...............................................................................................................267
Startup Code property.........................................................................................................................268
Status (Block) property .......................................................................................................................269
Status (Record) property .....................................................................................................................270
Subclass Information property ............................................................................................................271
Submenu Name property.....................................................................................................................272
Summarized Block property ...............................................................................................................273
Summarized Item property..................................................................................................................274
Summary Function property................................................................................................................275
Synchronize with Item property..........................................................................................................276
Tab Attachment Edge property ...........................................................................................................277
Tab Page property...............................................................................................................................278
Tab Page X Offset property ................................................................................................................279
Tab Page Y Offset property ................................................................................................................280
Tab Style property...............................................................................................................................281

vi
Tear-Off Menu property......................................................................................................................282
Timer_Name property.........................................................................................................................283
Title property ......................................................................................................................................284
Tooltip property ..................................................................................................................................285
Tooltip Background Color property....................................................................................................286
Tooltip Fill Pattern property ...............................................................................................................287
Tooltip Font Name property ...............................................................................................................288
Tooltip Font Size property ..................................................................................................................289
Tooltip Font Spacing property ............................................................................................................290
Tooltip Font Style property.................................................................................................................291
Tooltip Font Weight property .............................................................................................................292
Tooltip Foreground Color property.....................................................................................................293
Tooltip Visual Attribute Group property ............................................................................................294
Tooltip White on Black property ........................................................................................................295
Top Prompt Alignment property.........................................................................................................296
Top Prompt Offset property................................................................................................................297
Top_Record property..........................................................................................................................298
Top Title property...............................................................................................................................299
Topmost_Tab_Page property..............................................................................................................300
Transactional Triggers property..........................................................................................................301
Trigger Style property.........................................................................................................................302
Trigger Text property..........................................................................................................................303
Trigger Type property.........................................................................................................................304
Update Allowed (Block) property.......................................................................................................305
Update Allowed (Item) property.........................................................................................................306
Update Changed Columns Only property ...........................................................................................307
Update_Column property....................................................................................................................308
Update Commit property.....................................................................................................................309
Update Layout property ......................................................................................................................310
Update Only if NULL property...........................................................................................................311
Update_Permission property...............................................................................................................312
Update Procedure Arguments property...............................................................................................313
Update Procedure Name property.......................................................................................................314
Update Procedure Result Set Columns property.................................................................................315
Update Query property........................................................................................................................316
Use Security property..........................................................................................................................317
Use 3D Controls property ...................................................................................................................318
Username property..............................................................................................................................319
User_Date/Datetime_Format property................................................................................................320
User_Interface property ......................................................................................................................321
User_NLS_Date_Format property ......................................................................................................322
User_NLS_Lang property...................................................................................................................323
Validate from List property.................................................................................................................324
Validation property .............................................................................................................................325
Validation Unit property .....................................................................................................................326
Value when Checked property............................................................................................................327
Value when Unchecked property........................................................................................................328
VBX Control File property .................................................................................................................329
VBX Control Name property..............................................................................................................330
VBX Control Value property..............................................................................................................331
Vertical Fill property...........................................................................................................................332
Vertical Justification property.............................................................................................................333
Vertical Margin property ....................................................................................................................334
Vertical Object Offset property...........................................................................................................335
Vertical Origin property......................................................................................................................336

vii
Vertical Toolbar Canvas property.......................................................................................................337
Viewport Height, Viewport Width property .......................................................................................338
Viewport X Position, Viewport Y Position property ..........................................................................339
Viewport X Position on Canvas, Viewport Y Position on Canvas property .......................................340
Visible property ..................................................................................................................................341
Visible (Canvas) property ...................................................................................................................342
Visible (Item) property........................................................................................................................343
Visible (Tab Page) property................................................................................................................344
Visible in Horizontal/Vertical Menu Toolbar property.......................................................................345
Visible in Menu property ....................................................................................................................346
Visual Attribute property ....................................................................................................................347
Visual Attribute Group property .........................................................................................................348
Visual Attribute Type property ...........................................................................................................350
WHERE Clause/ORDER BY Clause properties.................................................................................351
White on Black property.....................................................................................................................353
Width/Height (WD, HT) properties ....................................................................................................354
Window property ................................................................................................................................355
Window_Handle property...................................................................................................................356
Window_State property ......................................................................................................................357
Window Style property .......................................................................................................................358
Wrap Style property............................................................................................................................359
Wrap Text property.............................................................................................................................360
X Corner Radius property...................................................................................................................361
X Position, Y Position property ..........................................................................................................362
Y Corner Radius property...................................................................................................................364
SYSTEM VARIABLES................................................................................................ 365
About system variables .......................................................................................................................365
Date and Time System Default Values ...............................................................................................366
$$DATE$$ system variable................................................................................................................368
$$DATETIME$$ system variable ......................................................................................................369
$$DBDATE$$ system variable...........................................................................................................370
$$DBDATETIME$$ system variable.................................................................................................371
$$DBTIME$$ system variable ...........................................................................................................372
$$TIME$$ system variable.................................................................................................................373
SYSTEM.BLOCK_STATUS system variable....................................................................................374
SYSTEM.COORDINATION_OPERATION system variable ...........................................................375
SYSTEM.CURRENT_BLOCK system variable ................................................................................377
SYSTEM.CURRENT_DATETIME system variable .........................................................................378
SYSTEM.CURRENT_FORM system variable ..................................................................................379
SYSTEM.CURRENT_ITEM system variable....................................................................................380
SYSTEM.CURRENT_VALUE system variable ................................................................................381
SYSTEM.CURSOR_BLOCK system variable...................................................................................382
SYSTEM.CURSOR_ITEM system variable ......................................................................................383
SYSTEM.CURSOR_RECORD system variable ................................................................................384
SYSTEM.CURSOR_VALUE system variable...................................................................................385
SYSTEM.CUSTOM_ITEM_EVENT system variable.......................................................................386
SYSTEM.CUSTOM_ITEM_EVENT_PARAMETERS system variable...........................................387
SYSTEM.DATE_THRESHOLD system variable..............................................................................388
SYSTEM.EFFECTIVE_DATE system variable ................................................................................389
SYSTEM.EVENT_WINDOW system variable..................................................................................390
SYSTEM.FORM_STATUS system variable......................................................................................391
SYSTEM.LAST_FORM system variable...........................................................................................392
SYSTEM.LAST_QUERY system variable.........................................................................................393

viii
SYSTEM.LAST_RECORD system variable......................................................................................395
SYSTEM.MASTER_BLOCK system variable...................................................................................396
SYSTEM.MESSAGE_LEVEL system variable.................................................................................397
SYSTEM.MODE system variable ......................................................................................................398
SYSTEM.MOUSE_BUTTON_MODIFIERS system variable...........................................................399
SYSTEM.MOUSE_BUTTON_PRESSED system variable ...............................................................400
SYSTEM.MOUSE_BUTTON_SHIFT_STATE system variable.......................................................401
SYSTEM.MOUSE_CANVAS system variable..................................................................................402
SYSTEM.MOUSE_FORM system variable.......................................................................................403
SYSTEM.MOUSE_ITEM system variable ........................................................................................404
SYSTEM.MOUSE_RECORD system variable ..................................................................................405
SYSTEM.MOUSE_RECORD_OFFSET system variable..................................................................406
SYSTEM.MOUSE_X_POS system variable......................................................................................407
SYSTEM.MOUSE_Y_POS system variable......................................................................................408
SYSTEM.RECORD_STATUS system variable.................................................................................409
SYSTEM.SUPPRESS_WORKING system variable..........................................................................410
SYSTEM.TAB_NEW_PAGE system variable...................................................................................411
SYSTEM.TAB_PREVIOUS_PAGE system variable ........................................................................412
SYSTEM.TRIGGER_BLOCK system variable .................................................................................413
SYSTEM.TRIGGER_ITEM system variable .....................................................................................414
SYSTEM.TRIGGER_NODE_SELECTED system variable ..............................................................415
SYSTEM.TRIGGER_RECORD system variable...............................................................................416
TRIGGERS ................................................................................................................... 418
Overview of trigger categories............................................................................................................418
Block processing triggers....................................................................................................................418
Interface event triggers........................................................................................................................419
Master/Detail triggers .........................................................................................................................420
Message-handling triggers ..................................................................................................................420
Navigational triggers...........................................................................................................................420
Query-time triggers.............................................................................................................................422
Transactional triggers..........................................................................................................................422
Validation triggers ..............................................................................................................................423
Other trigger categories.......................................................................................................................424
Delete-Procedure trigger.....................................................................................................................425
Function Key triggers..........................................................................................................................426
Insert-Procedure trigger ......................................................................................................................429
Key-Fn trigger.....................................................................................................................................430
Key-Others trigger ..............................................................................................................................431
Lock-Procedure trigger .......................................................................................................................432
On-Check-Delete-Master trigger.........................................................................................................433
On-Check-Unique trigger....................................................................................................................434
On-Clear-Details trigger......................................................................................................................436
On-Close trigger..................................................................................................................................437
On-Column-Security trigger................................................................................................................438
On-Commit trigger..............................................................................................................................440
On-Count trigger.................................................................................................................................441
On-Delete trigger ................................................................................................................................442
On-Dispatch-Event trigger..................................................................................................................443
On-Error trigger ..................................................................................................................................444
On-Fetch trigger..................................................................................................................................446
On-Insert trigger..................................................................................................................................448
On-Lock trigger...................................................................................................................................449
On-Logon trigger ................................................................................................................................450

ix
On-Logout trigger ...............................................................................................................................451
On-Message trigger.............................................................................................................................452
On-Populate-Details trigger ................................................................................................................454
On-Rollback trigger ............................................................................................................................455
On-Savepoint trigger...........................................................................................................................456
On-Select trigger.................................................................................................................................457
On-Sequence-Number trigger .............................................................................................................459
On-Update trigger ...............................................................................................................................460
Post-Block trigger ...............................................................................................................................461
Post-Change trigger.............................................................................................................................462
Post-Database-Commit trigger............................................................................................................464
Post-Delete trigger ..............................................................................................................................465
Post-Form trigger................................................................................................................................466
Post-Forms-Commit trigger ................................................................................................................467
Post-Insert trigger................................................................................................................................469
Post-Logon trigger ..............................................................................................................................470
Post-Logout trigger .............................................................................................................................471
Post-Query trigger...............................................................................................................................472
Post-Record trigger .............................................................................................................................474
Post-Select trigger...............................................................................................................................475
Post-Text-Item trigger.........................................................................................................................476
Post-Update trigger .............................................................................................................................477
Pre-Block trigger.................................................................................................................................478
Pre-Commit trigger .............................................................................................................................479
Pre-Delete trigger................................................................................................................................480
Pre-Form trigger..................................................................................................................................481
Pre-Insert trigger .................................................................................................................................482
Pre-Logon trigger................................................................................................................................484
Pre-Logout trigger...............................................................................................................................485
Pre-Popup-Menu trigger .....................................................................................................................486
Pre-Query trigger ................................................................................................................................487
Pre-Record trigger...............................................................................................................................489
Pre-Select trigger ................................................................................................................................490
Pre-Text-Item trigger ..........................................................................................................................491
Pre-Update trigger...............................................................................................................................492
Query-Procedure trigger .....................................................................................................................494
Update-Procedure trigger....................................................................................................................495
User-Named trigger.............................................................................................................................496
When-Button-Pressed trigger..............................................................................................................497
When-Checkbox-Changed trigger.......................................................................................................498
When-Clear-Block trigger...................................................................................................................499
When-Create-Record trigger...............................................................................................................500
When-Custom-Item-Event trigger.......................................................................................................502
When-Database-Record trigger...........................................................................................................504
When-Form-Navigate trigger..............................................................................................................505
When-Image-Activated trigger............................................................................................................506
When-Image-Pressed trigger...............................................................................................................507
When-List-Activated trigger ...............................................................................................................508
When-List-Changed trigger.................................................................................................................509
When-Mouse-Click trigger .................................................................................................................510
When-Mouse-DoubleClick trigger......................................................................................................511
When-Mouse-Down trigger ................................................................................................................513
When-Mouse-Enter trigger .................................................................................................................514
When-Mouse-Leave trigger ................................................................................................................515
When-Mouse-Move trigger.................................................................................................................516

x
When-Mouse-Up trigger.....................................................................................................................517
When-New-Block-Instance trigger .....................................................................................................518
When-New-Form-Instance trigger ......................................................................................................519
When-New-Item-Instance trigger........................................................................................................521
When-New-Record-Instance trigger ...................................................................................................522
When-Radio-Changed trigger .............................................................................................................523
When-Remove-Record trigger............................................................................................................524
When-Tab-Page-Changed trigger .......................................................................................................525
When-Timer-Expired trigger ..............................................................................................................526
When-Tree-Node-Activated trigger ....................................................................................................528
When-Tree-Node-Expanded trigger....................................................................................................529
When-Tree-Node-Selected trigger ......................................................................................................530
When-Validate-Item trigger................................................................................................................531
When-Validate-Record trigger............................................................................................................533
When-Window-Activated trigger........................................................................................................535
When-Window-Closed trigger............................................................................................................536
When-Window-Deactivated trigger ....................................................................................................537
When-Window-Resized trigger...........................................................................................................538
INDEX............................................................................................................................ 540

xi
Send Us Your Comments
Volume 2
Part No: A73074-01
Oracle Corporation welcomes your comments and suggestions on the quality and usefulness of this
publication. Your input is an important part of the information used for revision.
• Did you find any errors?
• Is the information clearly presented?
• Do you need more information? If so, where?
• Are the examples correct? Do you need more examples?
• What features did you like most about this manual?
If you find any errors or have any other suggestions for improvement, please indicate the part number,
chapter, section, and page number (if available). You can send comments to us by electronic mail to
oddoc@us.oracle.com.
If you have any problems with the software, please contact your local Oracle World Wide Support Center.

xiii
Preface
This book is Volume 2 of the Oracle Forms Develop:r Form Builder Reference. For more information
about the book, please see the preface in Volume 1.

1
Properties (continued)
Format Mask property
Description
Specifies the display format and input accepted for data in text items.
Refer to Built-in
Usage Notes
Valid format masks for character strings, numbers and dates are described in the following tables.
Character Strings
The following table describes valid format masks for character strings.
Element Example Description
FM FMXX99 Fill mode: accept string as typed, do not right justify.
Allows end user input string to be shorter than the
format mask.
X XXXX Any alphabetic, numeric, or special character. End
user input string must be exact length specified by
format mask.
9 9999 Numeric characters only. End user input string must be
exact length specified by format mask.
A AAAA Alphabetic characters only. End user input string must
be exact length specified by format mask.
Character String Examples
Format
Mask
Description

2
XXAA Will accept: --ab, abcd, 11ab; will not accept: --11, ab11, or ab--(must
use XX to accept hyphens and other special characters).
XXXX Will accept any combination of alphabetic, numeric, or special
characters: --ab, abcd, 11ab, --11, ab11, or ab--. Will accept 1234 or
abcd; will not accept 123 or abc. (To accept input string shorter than
mask, use FMXXXX.)
FMXX99 Will accept ab12, ab1, ab followed by two spaces; will not accept
12ab or abcd. (To produce the Form Builder Version 3.0 Alpha
datatype, use FMAAAAAA.)
• To embed additional characters such as a hyphen (-) or a comma (,), surround the character with
double-quotes (").
• Embedded characters are separate from text item values and are not collated along with text item
values, even when the end user enters them.
NUMBERS
The following table describes valid format masks for numbers.
9 9999 Number of nines determines display width. Any
leading zeros will be displayed as blanks.
0 0999 Display leading zeros.
0 9990 Display zero value as zero, not blank.
$ $9999 Prefix value with dollar sign.
B B9999 Display zero value as blank, not "0".
MI 9999MI Display "-" after a negative value.
PR 9999PR Display a negative value in <angle brackets>.
comma 9,999 Display a comma in this position. For correct behavior
in multilingual applications, substitute G to return the
appropriate group (thousands) separator.
period 99.99 Display a decimal point in this position. For correct
behavior in multilingual applications, substitute D to
return the appropriate decimal separator.
E 9.999EEEE Display in scientific notation (format must contain
exactly four "E"s).
FM FM999 Fill mode: accept string as typed, do not right justify.
• When you mask a number with nines (9), Form Builder adds a space in front of the number to
accommodate the plus (+) or minus (-) sign. However, since the plus sign is not displayed, it

3
appears as if Form Builder adds a space in front of the number. (The minus sign is displayed.)
double-quotes (").
NUMBER Examples
Format Mask Description
FM099"-"99"-"9999 Displays the social security number as formatted,
including hyphens, even if end user enters only nine
digits.To create a Social Security column, create an 11-
character column, set to fixed length, with a format
mask of 099"-"99"-"9999. This mask will
accommodate Social Security numbers that begin with
zero, accepting 012-34-5678 or 012345678 (both
stored as 012345678).
99999PR Accepts -123; reformats as <123>.
999MI Accepts -678; reformats as 678-.
9.999EEEE Displays as 1.00E+20.
How Forms handles length mismatches
If a runtime user enters a numeric string that exceeds the format mask specification, the value will be
rejected. For example:
Format Mask User enters Result
99.9 321.0 Invalid
99.9 21.01 Invalid
99.9 21.1 21.1
99.9 01.1 1.1
In contrast, if a numeric value fetched from the database exceeds the format mask specification for its
display field, the value is displayed, but truncated, with rounding, to fit the mask. (The item itself within
the Forms application retains its full value.) For example, if the database held the value 2.0666, and the
format mask was 99.9, the value displayed to the user would be 2.1. However, the value of the item
within the form would be the full 2.0666.
Dates
The following table describes valid format masks for dates.
Element Description
YYYY or SYYYY 4-digit year; "S" prefixes "BC" date with "-".

4
YYY or YY or Y Last 3, 2, or 1 digits of year.
Y,YYY Year with comma in this position.
BC or AD BC/AD indicator.
B.C. or A.D. BD/AD indicator with periods.
RR Defaults to correct century. Deduces the century from a
date entered by comparing the 2 digit year entered with the
year and century to which the computer’s internal clock is
set. Years 00-49 will be given the 21st
century (the year
2000), and years from 50-99 will be given the 20th century
(the year 1900).
MM Month (01-12; JAN = 01).
MONTH Name of month, padded with blanks to length of 9
characters.
MON Name of month, 3-letter abbreviation.
DDD Day of year (1-366).
DD Day of month (1-31).
D Day of week (1-7; Sunday=1).
DAY Name of day, padded with blanks to length of 9 characters.
DY Name of day, 3-letter abbreviation.
J Julian day; the number of days since January 1, 4712 BC.
AM or PM Meridian indicator.
A.M. or P.M. Meridian indicator with periods.
HH or HH12 Hour of day (1-12).
HH24 Hour of day (0-23).
MI Minute (0-59).
SS Second (0-59).
SSSSS Seconds past midnight (0-86399).
/. , . Punctuation is reproduced in the result.
"..." Quoted string is reproduced in the result.
FM Fill mode: assumes implied characters such as O or space;
displays significant characters left justified. Allows end
user input to be shorter than the format mask. (Use in
conjunction with FX to require specific delimiters.)
FX All date literals must match the format mask exactly,
including delimiters.

5
• When you prefix a date mask with FX, the end user must enter the date exactly as you define the
mask, including the specified delimiters:
Date Examples
FXDD-MON-YY Will accept 12-JAN-94, but will not accept 12.JAN.94 or
12/JAN/94 because the delimiters do not match the mask.
Will not accept 12JAN94 because there are no delimiters.
Will accept 01-JAN-94 but will not accept 1-JAN-94.
FMDD-MON-YY Will accept 01-JAN-94. Will also accept the entry of other
delimiters, for example 01/JAN/94 and 01 JAN 94.
However, will not accept 01JAN94. Will accept 1-JAN-94,
converting it to 01-JAN-94.
DD-MON-YY Will accept 12.JAN.94, 12/JAN/94 or 12-JAN-94. Note:
Any delimiter characters will be accepted, but if delimiters
are omitted by the end user, this mask will interpret date
characters as a delimiters. Will accept 12-JAN94, (but will
erroneously interpret as 12-JAN-04); but will not accept
12JAN94, because "AN" is not a valid month name.
• Use of a format mask only affects how the data looks. Form Builder stores full precision, regardless
of how the data is presented.
double-quotes ("). Note, however, that double-quotes themselves cannot be used as a character. In
other words, trying to achieve output of DD"MM by specifying a mask of DD"""MM would not
work.
FMMONTH" "DD", "YYYY Displays the text item data in the specified date
format: JANUARY 12, 1994, including the
appropriate blank spaces and comma.
FMDD-MONTH-YYYY Displays as 12-JANUARY-1994.
DY-DDD-YYYY Displays as WED-012-1994. Note: for input
validation including day of the week, a mask that
allows specific determination of the day is
required, such as this example or DY-DD-MM-
YY.
• When you use day of the week formats, be sure that the data includes day of the week information.
To avoid illogical masks, display also either the day of the year (1-366) or the month in some

6
format.
DD-MONTH-YYYY Displays as 12-JANUARY-1994.
DY-DDD-YYYY Displays as WED-012-1994.
DY-DD-MON-YY Displays as WED-12-JAN-94. Be sure to include
month. Avoid masks such as DY-DD-YY, which could
generate an error.
NLS Format Masks
The following table describes valid National Language Support (NLS) format masks.
C C999 Returns the international currency symbol.
L L9999 Returns the local currency symbol.
D 99D99 Returns the decimal separator.
G 9G999 Returns the group (thousands) separator.
comma 9,999 Displays a comma in this position.
period 9.999 Displays a decimal point in this position. Displays a
decimal point in this position.
NLS Format Mask Examples
L99G999D99 Displays the local currency symbol, group, and decimal
separators: if NLS_LANG=American, this item displays as
$1,600.00; if NLS_LANG=Norwegian, this item displays as
Kr.1.600,00.
C99G999D99 Displays the appropriate international currency symbol: if
NLS_LANG=American, this item displays as USD1,600.00; if
NLS_LANG=French, this item displays as FRF1.600,00.
Format Mask restrictions
• When setting the Maximum Length property for a text item, include space for any embedded
characters inserted by the format mask you specify.

7
• Format masks can contain a maximum of 30 characters.
• Form Builder supports only ORACLE format masks that are used for both input and output.
Output-only format masks, such as WW, are not supported.

8
Form_Name property
Description
Specifies the name of the form.
Applies to form
Set not settable
Refer to Built-in
GET_FORM_PROPERTY
Usage Notes
Form_Name at the form level corresponds to Current_Form_Name at the application level.
Current_Form_Name is gettable with GET_APPLICATION_PROPERTY.

9
Formula property
Description
Specifies a single PL/SQL expression that determines the value for a formula calculated item. The
expression can reference built-in or user-written subprograms.
Applies to item
Set Form Builder
Refer to Built-in
RECALCULATE
Usage Notes
You cannot enter an entire PL/SQL statement as your formula; accordingly, do not terminate your
calculation expression with a semicolon. Form Builder adds the actual assignment code to the formula
internally do not code it yourself. For example, instead of coding an entire assignment statement, code
just the expression
:emp.sal + :emp.comm
Form Builder will internally convert this into a complete statement, e.g.,
:emp.gross_comp := (:emp.sal + :emp_comm);
Required/Optional required if Calculation Mode property is set to Formula

10
Frame Alignment property
Description
Specifies how objects should be aligned within the width of the frame, either Start, End, Center, Fill, or
Column. This property is valid when the Layout Style property is set to Form.
Applies to frame
Set Form Builder
Default
Fill

11
Frame Title property
Description
Specifies the frame’s title.
Applies to frame
Set Form Builder
Default
blank

12
Frame Title Alignment property
Description
Specifies the title alignment for a frame, either Start, End, or Center.
Note: Title alignment is relative to the Direction of the canvas on which the canvas appears.
Applies to frame
Set Form Builder
Default
Start

13
Frame Title Background Color property
Description
Specifies the color to apply to the frame title background.
Applies to frame
Set Form Builder
Default
Defaults to the standard operating system font color (usually white).

14
Frame Title Font Name property
Description
Specifies the name of the font (typeface) to apply to the frame title.
Applies to frame
Set Form Builder
Default
Defaults to the standard operating system font

15
Frame Title Font Size property
Description
Specifies the size of the font (typeface) to apply to the frame title.
Applies to frame
Set Form Builder
Default
Defaults to the standard operating system font size

16
Frame Title Font Spacing property
Description
Specifies the spacing to apply to the frame title text.
Applies to frame
Set Form Builder
Default
Defaults to the standard operating system font spacing

17
Frame Title Font Style property
Description
Specifies the typographic style (for example, Italic) to apply to the frame title text.
Applies to frame
Set Form Builder
Default
Defaults to the standard operating system font style

18
Frame Title Font Weight property
Description
Specifies the typographic weight (for example, Bold) to apply to the frame title text.
Applies to frame
Set Form Builder
Default
Defaults to the standard operating system font weight.

19
Frame Title Foreground Color property
Description
Specifies the color to apply to the frame title text.
Applies to frame
Set Form Builder
Default
Defaults to the standard operating system font color (usually black).

20
Frame Title Offset property
Description
Specifies the distance between the frame and its title.
Applies to frame
Set Form Builder
Default
2 char cells (or the equivalent depending on the form coordinate system)

21
Frame Title Reading Order property
Description
Specifies the reading order for frame titles, either Default, Left-to-Right, or Right-to-Left.
Applies to frame
Set Form Builder
Default
Default

22
Frame Title Spacing property
Description
Specifies the amount of space reserved on either side of the frame’s title.
Applies to frame
Set Form Builder
Default
1 char cell (or the equivalent depending on the form coordinate system)

23
Frame Title Visual Attribute Group property
Description
Specifies how the frame title’s individual attribute settings (Font Name, Background Color, Fill Pattern,
etc.) are derived. The following settings are valid for this property:
Default Specifies that the object should be displayed with default color,
pattern, and font settings. When Visual Attribute Group is set to
Default, the individual attribute settings reflect the current system
defaults. The actual settings are determined by a combination of
factors, including the type of object, the resource file in use, and
the platform.
Named visual
attribute
Specifies a named visual attribute that should be applied to the
object. Named visual attributes are separate objects that you
create in the Object Navigator and then apply to interface
objects, much like styles in a word processing program. When
Visual Attribute Group is set to a named visual attribute, the
individual attribute settings reflect the attribute settings defined
for the named visual attribute object. When the current form does
not contain any named visual attributes, the poplist for this
property will show Default.
Applies to frame title
Set Form Builder
Default
Default
Usage Notes
• Default and named visual attributes can include the following individual attributes, listed in the
order they appear in the Property Palette:
Font Name The font family, or typeface, that should be used for text in the object. The list of fonts
available is system-dependent.
Font Size The size of the font, specified in points.
Font Style The style of the font.
Font Spacing The width of the font, that is, the amount of space between characters (kerning).
Font Weight The weight of the font.
Foreground Color The color of the object’s foreground region. For items, the Foreground Color

24
Background Color The color of the object’s background region.
Fill Pattern The pattern to be used for the object’s fill region. Patterns are rendered in the two colors
Character Mode Logical Attribute Specifies the name of a character mode logical attribute defined
in an Oracle Terminal resource file that is to be used as the basis of device attributes for a character
mode version of your application.
White on Black Specifies that the object is to appear on a monochrome bitmap display device as
white text on a black background.
Not all attributes are valid for each object type. For example, setting font attributes for a window
object has no effect. (The font used in a window’s title bar is derived from the system.)
A new object in a new form has Default visual attributes. The default settings are defined
internally. Override the default font for new items and boilerplate by setting the optional
FORMS60_DEFAULTFONT environment variable. For example, On Microsoft Windows, set
this variable in the ORACLE.INI file, as follows:
FORMS60_DEFAULTFONT="COURIER.10". The default font specified determines the font
used for new boilerplate text generated by the New Block window, and for any items that have
Visual Attribute Group set to Default.
When you create an item in the Layout Editor, its initial visual attribute settings are determined by the
current Layout Editor settings for fonts, colors, and patterns, as indicated by the Font dialog and
Color and Pattern palettes.
On Microsoft Windows, the colors of buttons, window title bars, and window borders are controlled
by the Windows Control Panel color settings specified for these elements. You cannot override
these colors in Form Builder.
When the Use 3D Controls form property is set to Yes on Microsoft Windows (the default), items are
rendered with shading that provides a sculpted, three-dimensional look. A side effect of setting this
property is that any canvases that have Visual Attribute Group set to Default derive their color
setting from the Windows Control Panel (gray for most color schemes). You can override this
setting by explicitly applying named visual attributes to the canvas.
An item that has Visual Attribute Group set to Default, or that has individual attribute settings left
unspecified, inherits those settings from the canvas to which it is assigned. Similarly, a canvas that
has Visual Attribute Group set to Default, or that has individual attribute settings left unspecified,
inherits those settings from the window in which it is displayed. For example, if you set a window’s
Background Color to CYAN, and then leave Background Color unspecified for the canvas assigned
to the window, at runtime, that canvas will inherit the CYAN background from its window. Visual
attribute settings derived through window canvas or canvas item inheritance are apparent only at
runtime, not at design time.
You can apply property classes to objects to specify visual attribute settings. A property class can
contain either the Visual Attribute Group property, or one or more of the individual attribute
properties. (If a property class contains both Visual Attribute Group and individual attributes, the
Visual Attribute Group property takes precedence.)
If you apply both a named visual attribute and a property class that contains visual attribute settings to
the same object, the named visual attribute settings take precedence, and the property class visual
attribute settings are ignored.
Logical attribute definitions defined in the resource file take precedence over visual attributes
specified in the Form Builder, local environment variable definitions, and default Form Builder
attributes. To edit the resource file, use the Oracle Terminal utility.

25
Graphics Type property
Description
A read-only property that specifies the type of the graphic object. Possible values include: Arc, Chart,
Group, Image, Line, Polygon, Rectangle, Rounded Rectangle, Symbol, and Text. (Same possible values
as Graphics Builder property Object Type.)
Applies to graphics general
Set Form Builder
Default
the type

26
Group_Name property
Description
Specifies the name of the record group on which an LOV is based.
Applies to LOV
Refer to Built-in
• GET_LOV_PROPERTY
Default
Name of the underlying record group.
Usage Notes
Set Group_Name to replace the LOV’s current record group with another record group at runtime. The
column names and types in the new record group must match the column names and types in the record
group you are replacing.

27
Help property
Description
On character mode platform specifies help text for the menu item. Help text is displayed in a window
when the end user presses [Help] while the menu item is selected.
Set Form Builder
Help restrictions
Applies to character mode applications only.

28
Hide on Exit property
Description
For a modeless window, determines whether Form Builder hides the window automatically when the end
user navigates to an item in another window.
Applies to window
Refer to Built-in
Default
No
Hide on Exit restrictions
• Cannot be set for a root window: a root window always remains visible when the end user navigates
to an item in another window.

29
Highest Allowed Value/Lowest Allowed Value property
Description
Determines the maximum value or minimum value, inclusive, that Form Builder allows in the text item.
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
Usage Notes
• The following values are valid for range settings:
any valid constant
form item (:block_name.item_name)
global variable (:GLOBAL.my_global)
form parameter (:PARAMETER.my_param)
• Form Builder evaluates the values in items by data type, as follows:
ALPHA alphabetical according to your system’s collating sequence
CHAR alphabetical according to your system’s collating sequence
DATE chronological
DATETIME chronological
INT numerical ascending
NUMBER numerical ascending
• For all items, you can enter dates in either:
the default format for your NLS_LANG setting or
the format you specified as a format mask
For compatibility with prior releases, a reference to a form item or to a sequence may be specified with a
leading ampersand (&) instead of a leading colon (:).
To specify a raw value that begins with a leading ampersand (‘&’) or a leading colon (‘:’), specify two of
them (that is, ‘&&’ or ‘::’). (This is a change in Forms behavior, beginning with Release 6.5.)

30
Hint (Item) property
Description
Specifies item-specific help text that can be displayed on the message line of the root window at runtime.
Hint text is available when the input focus is in the item.
Applies to all items except chart items, display items, and custom items
Set Form Builder
Refer to Built-in
• GET_ITEM_PROPERTY (HINT_TEXT)
Default
"Enter value for: <item
name>"
For an item that was created by using the Data Block Wizard
NULL For all other items
Usage Notes
Leave the Hint property NULL if you do not want the item to have hint text.

31
Hint (Menu Item) property
Description
For a character mode application, specifies hint text for a menu item. In pull-down and bar menu display
styles, hint text is displayed on the message line when the input focus is in the menu item.
In full-screen display style, hint text, if specified, is displayed as the item descriptor, and the menu item
name is ignored. (When no hint text is specified, Form Builder displays the item name as the descriptor.)
Set Form Builder
Hint (Menu Item) restrictions
• Applies to character mode applications only.

32
Hint (Menu Substitution Parameter) property
Description
Specifies a description or instruction to appear on the message line when the end user enters a value for
the menu substitution parameter.
Set Form Builder

33
Horizontal Justification property
Description
Specifies the horizontal justification of the text object as either Left, Right, Center, Start, or End.
Set Form Builder
Default
Start

34
Horizontal Margin property
Description
Specifies the distance between the frame’s borders (left and right) and the objects within the frame.
Applies to frame
Set Form Builder
Default
1 char cell (or the equivalent depending on the form coordinate system)

35
Horizontal Object Offset property
Description
Specifies the horizontal distance between the objects within a frame.
Applies to frame
Set Form Builder
Default
2 char cells (or the equivalent depending on the form coordinate system)

36
Horizontal Origin property
Description
Specifies the horizontal position of the text object relative to its origin point as either Left, Right, or
Center.
Set Form Builder
Default
Left

37
Horizontal Toolbar Canvas property
Description
Specifies the canvas that should be displayed as a horizontal toolbar on the window. The canvas
specified must be a horizontal toolbar canvas (Canvas Type property set to Horizontal Toolbar) and must
be assigned to the current window by setting the Window property.
Applies to window
Set Form Builder
Default
Null
Required/Optional required if you are creating a horizontal toolbar
Usage Notes
• In the Properties window, the poplist for this property shows only canvases that have the Canvas
Type property set to Horizontal Toolbar.
• At runtime, Form Builder attempts to display the specified horizontal toolbar on the window.
However, if more than one toolbar of the same type has been assigned to the same window (by
setting the canvas Window property to point to the specified window), Form Builder may display a
different toolbar in response to navigation events or programmatic control.
• On Microsoft Windows, the specified horizontal toolbar canvas will not be displayed on the window
if you have specified that it should be displayed on the MDI application window by setting the Form
Horizontal Toolbar Canvas form property.

38
Icon Filename property
Description
Specifies the name of the icon resource that you want to represent the iconic button, menu item, or
window.
Applies to button, menu item, window
Refer to Built-in
Default
NULL
Usage Notes
When defining the Icon Filename property, do not include the
icon file extension (.ico, .xpm, etc.). For example, enter
my_icon, not my_icon.ico.
The icon filename should not end in any of the following five letters: A, L, M, S, and X. (Neither upper-
case nor lower-case are allowed.) These are reserved letters used internally for icon sizing. Unexpected
icon placement results may occur if your icon filename ends in any of these letters.
Use the platform-specific environment variable to indicate the directory where icon resources are
located. For example, the Microsoft Windows name for this variable is UI60_ICON. (For more
information on this variable name, refer to the Form Builder documentation for your operating system.)
Icon Filename restrictions
• For a window, it is only valid when Minimize Allowed property set to Yes.
• Icon resources must exist in the runtime operating system, and are not incorporated in the form
definition. For this reason, icon resource files are not portable across platforms.

39
Icon in Menu property
Description
Specifies whether an icon should be displayed in the menu beside the menu item. If Yes, the Icon
Filename property specifies the icon that will be displayed.
Set Form Builder
Default
No

40
Iconic property
Description
Specifies that a button is to be an iconic button.
Applies to button
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
Default
No
Usage Notes
When Iconic is Yes, the button’s Icon Filename property specifies the icon resource that Form Builder
should display for the button.
Iconic restrictions
A valid icon resource file name must be supplied.

41
Image Depth property
Description
Specifies the image depth setting Form Builder applies to an image being read from or written to a file in
the filesystem. Valid values are:
• Original
• Monochrome
• Gray
• LUT (Lookup Table)
• RGB (Red, Green, Blue)
Refer to Built-in
• WRITE_IMAGE_FILE
Default
Original

42
Image Format property
Description
Specifies the format in which an image item will be stored in the database. Valid values are:
• BMP
• CALS
• GIF
• JFIF
• PICT
• RAS
• TIFF
• TPIC
Set Form Builder
Refer to Built-in
• WRITE_IMAGE_FILE
Default
TIFF
Usage Notes
• The default Oracle image storage format no longer is valid.
• The value you set for this property will override the original format of an image when the record
containing the image item is stored in the database. For example, if an image item’s Image Format
property is set to GIF, and a TIFF image is pasted into the image item at runtime, the pasted image
will be stored in GIF format when the record is saved to the database.

43
Implementation Class property
Description
Identifies the class name of a container of a JavaBean, or of a custom implementation for a control item
type when you want to supply an alternate to the standard Form Builder control.
Applies to
The following control item types:
Bean Area
Check Box
List Item
Push Button
Radio Group
Text Item
Set
Form Builder
Default
None.
Required/Optional
Always required for Bean Area. This property identifies the class name of the container of the JavaBean
you are adding to the application. (If this property is not supplied, the form’s end user will see an empty
square.)
Also required for any other control item type listed above if the form is to use a customized, user-
supplied implementation of that control. This identifies the class name of the alternate control you are
supplying.
Set at Runtime
No.
Usage Notes
• The Implementation Class property is only available for those control item types listed above, not
for all control item types.

44
Include REF Item property
Description
Creates a hidden item called REF for this block. This item is used internally to coordinate master-detail
relationships built on a REF link. This item also can be used programmatically to access the object Id
(OID) of a row in an object table.
Applies to
Blocks based on object tables; master-detail REF links, in particular.
Set Form Builder
Default
Default is No. However, when creating a relationship based on a REF pointer, Form Builder sets this
property to Yes.
Required/Optional
Required for a master block in a master-detail relationship based on a REF pointer.
Usage Notes
This REF item is used to obtain the object-ids (OIDs) of the rows in an object table.
Each row in an object table is identified by a unique object id (OID). The OID is a unique identifier for
that row. These OIDs form an implicit column in an object table.
In a REF pointer relationship between two tables, the REF column in the pointing table holds copies of
the OID values (addresses) of the pointed-to table. This forms the link between the two tables.
The Data Block wizard sets this property to Yes and creates this REF item when you build a master-
detail relationship based on a REF pointer. The item is named REF, and is in the master block. It is not
visible to the end user. In addition, the wizard sets the Copy_Value_From_Item property in the detail
block to access this new REF. This is how Form Builder coordinates the master-detail relationship at
runtime.

45
Inherit Menu property
Description
Specifies whether the window should display the current form menu on window managers that support
this feature.
Applies to window
Set Form Builder
Default
Yes
Inherit Menu restrictions
• Not valid on Microsoft Windows.

46
Initial Keyboard State property
Description
Initial Keyboard State sets the keyboard to generate either Local or Roman characters when the item
receives input focus, so the end user can begin to type immediately, without switching the keyboard state.
Value Description
Default Initial keyboard state is based on the value of the Reading Order
property.
Local Initial keyboard state is Local (Right To Left language).
Roman Initial keyboard state is Roman (Left To Right language).
Applies to display item, text item
Set Form Builder
Usage Notes
• Most of the time, you will use this property only for text items.
• The end user can override the setting for Initial Keyboard State by pressing the keyboard state
toggle key.

47
Initial Menu property
Description
Specifies the name of the individual menu in the menu module that Form Builder should use as the main,
or top-level, menu for this invocation. End users cannot navigate above the menu specified as the
starting menu.
By default, the starting menu is the menu named in the menu module property, Main Menu. The Initial
Menu property allows you to override the Main Menu property.
Set Form Builder
Default
blank (Form Builder uses the default main menu as the starting menu)
Initial Menu restrictions
• The menu specified must exist in the menu module.

48
Initial Value (Item) property
Description
Specifies the default value that Form Builder should assign to the item whenever a record is created. The
default value can be one of the following:
• raw value (216, ’TOKYO’)
• form item (:block_name.item_name)
• global variable (:GLOBAL.my_global)
• form parameter (:PARAMETER.my_param)
• a sequence (:SEQUENCE.my_seq.NEXTVAL)
Applies to check boxes, display items, list items, radio groups, text items, and user areas
Set Form Builder
Default
Null
Required/Optional Optional for all items except radio groups, check boxes, and list items.
For a radio group, a valid Initial Value is required unless
a) the radio group specifies Mapping of Other Values or,
b) the value associated with one of the radio buttons in the group is NULL.
For a list item, a valid Initial Value is required unless
a) the list item specifies Mapping of Other Values or,
b) the value associated with one of the list elements is NULL.
For a check box, a valid Initial Value is required unless
a) the check box specifies Mapping of Other Values or,
b) the value associated with Checked or Unchecked is NULL.
Usage Notes
• When using the default value to initialize the state of items such as check boxes, radio groups, or list
items, keep in mind that the default value does not get assigned until Form Builder creates a record
in the block.
Subordinate mirror items are initialized from the master mirror item’s Initial Value property. The ON-
SEQUENCE-NUMBER trigger is also taken from the master item. If the subordinate mirror item
specifies Initial Value and ON-SEQUENCE-NUMBER, Form Builder ignores them and issues a
warning.
At runtime, the initial value set by this property will be ignored if all of the following are true for the
item (or an item that mirrors it):
the item is a poplist, T-list, radio group, or check box

49
there is no element corresponding to the initial value
the item does not allow other values
For compatibility with prior releases, a reference to a form item or to a sequence may be specified with a
leading ampersand (&) instead of a leading colon (:).
To specify a raw value that begins with a leading ampersand (‘&’) or a leading colon (‘:’), specify two of
them (that is, ‘&&’ or ‘::’). (This is a change in Forms behavior, beginning with Release 6.5.)
Initial Value (Item) property restrictions
• For a text item, the value cannot be outside the range defined by the Lowest Allowed Value and
Highest Allowed Value properties.
• For a radio group, the default value must be either the name (not the label) of one of the radio
buttons, or the value associated with one of the radio buttons. Form Builder checks first for a radio
button name.
• For a list item, the default value must be either the name of one of the list elements, or the value
associated with one of the list elements. Form Builder checks first for a list element name.

50
Insert Allowed (Block) property
Description
Specifies whether records can be inserted in the block.
Applies to block
Set Form Builder , programatically
Refer to Built-in
Default
Yes

51
Insert Allowed (Item) property
Description
Determines whether an end user can modify the value of an item in a new record (i.e., when the
Record_Status is NEW or INSERT).
If you set Insert Allowed to No for an item, the user will not be able to manipulate the item in a new
record. For example, the user will not be able to type into a text item, check a check box, or select a
radio button.
Applies to text item, check box, list item, radio button, image item, custom items
Refer to Built-in
Default
Yes
Usage Notes
Set Insert Allowed to No when you want the user to be able to inspect an item without being able to
modify it. For example, for a system-generated key field, you might set Insert Allowed to No to
prevent modification of the key while still displaying it normally (not grayed out).
Set the Enabled property to No if you want to prevent an item from responding to mouse events.
Disabled items are grayed out to emphasize the fact that they are not currently applicable, while
enabled items with Insert Allowed set to No allow the user to browse an item’s value with the mouse or
keyboard, but not to modify the item’s value.
Insert Allowed resembles Update Allowed, which applies to records with a Record_Status of QUERY or
CHANGED. For items in database blocks, Insert Allowed, in combination with Update Allowed, lets
you control whether the end user can enter or change the value displayed by an item. For items in
non-database blocks, setting Insert Allowed to No lets you create a display-only item without disabling
it.
If Enabled or Visible is set to No (or PROPERTY_FALSE for runtime), then the items’ or item
instance’s Insert Allowed property is effectively false.
• Setting INSERT_ALLOWED to Yes (or PROPERTY_TRUE for runtime) has no effect at the item
instance level unless it is set consistently at the block and item levels. For example, your user
cannot type data into an item instance if INSERT_ALLOWED is true at the instance level, but not at
the item or block levels.
Insert Allowed (Item) restrictions
• If you are using SET_ITEM_PROPERTY to set Insert Allowed to true, then you must set item

52
properties as follows:
Enabled to Yes (PROPERTY_TRUE for runtime)
Visible to Yes (PROPERTY_TRUE for runtime)
When Insert Allowed is specified at multiple levels (item instance, item, and block), the values are
ANDed together. This means that setting INSERT_ALLOWED to Yes (PROPERTY_TRUE for
runtime) has no effect at the item instance level unless it is set consistently at the block and item
levels. For example, your user cannot type data into an item instance if INSERT_ALLOWED is true
at the instance level, but not at the item or block levels.

53
Insert Procedure Arguments property
Description
Specifies the names, datatypes, and values of the arguments to pass to the procedure for inserting data
into the data block. The Insert Procedure Arguments property is valid only when the DML Data Target
Type property is set to Procedure.
Applies to block
Set Form Builder
Default
NULL

54
Insert Procedure Name property
Description
Specifies the name of the procedure to be used for inserting data into the data block. The Insert
Procedure Name property is valid only when the DML Data Target Type property is set to Procedure.
Applies to block
Set Form Builder
Default
NULL

55
Insert Procedure Result Set Columns property
Description
Specifies the names and datatypes of the result set columns associated with the procedure for inserting
data into the data block. The Insert Procedure Result Set Columns property is valid only when the DML
Data Target Type property is set to Procedure.
Applies to block
Set Form Builder
Default
NULL

56
Interaction Mode property
Description
Specifies the interaction mode for the form module. Interaction mode dictates how a user can interact
with a form during a query. If Interaction Mode is set to Blocking, then users are prevented from resizing
or otherwise interacting with the form until the records for a query are fetched from the database. If set to
Non-Blocking, then end users can interact with the form while records are being fetched.
Non-blocking interaction mode is useful if you expect the query will be time-consuming and you want
the user to be able to interrupt or cancel the query. In this mode, the Forms runtime will display a dialog
that allows the user to cancel the query.
You cannot set the interaction mode programmatically, however, you can obtain the interaction mode
programmatically using the GET_FORM_PROPERTY built-in.
Set Form Builder
Refer to Built-in
Default Blocking

57
Isolation Mode property
Description
Specifies whether or not transactions in a session will be serializable. If Isolation Mode has the value
Serializable, the end user sees a consistent view of the database for the entire length of the transaction,
regardless of updates committed by other users from other sessions. If the end user queries and changes a
row, and a second user updates and commits the same row from another session, the first user sees
Oracle error (ORA-08177: Cannot serialize access.).
Set Form Builder
Usage Notes
Serializable mode is best suited for an implementation where few users are performing a limited number
of transactions against a large database; in other words, an implementation where there is a low chance
that two concurrent transactions will modify the same row, and where long-running transactions are
queries. For transaction-intensive implementations, leave Isolation Mode set to Read Committed (the
default). Serializable mode is best used in conjunction with the block-level property Locking Mode set to
Delayed.
Default
Read Committed

58
Item Roles property
Description
Specifies which menu roles have access to a menu item.
Set Form Builder
Usage Notes
You can only grant access to members of those roles displayed in the roles list. To add a role to this list,
set the menu module property Module Roles.
Item Roles restrictions
Valid only when the name of at least one role has been specified in the menu module roles list.

59
Item Type property
Description
Specifies the type of item. An item can be one of the following types:
• ActiveX Control (32-bit Windows platforms)
• Bean Area
• Chart Item
• Check Box
• Display Item
• Hierarchical Tree
• Image
• List Item
• OLE Container
• Push Button
• Radio Group
• Sound
• Text Item
• User Area
• VBX Control (Microsoft Windows 3.1 only)
Applies to: items
Set: Form Builder
Default: Text Item

60
Item_Is_Valid property
Description
Specifies whether an item is marked internally as valid.
Applies to item
Refer to Built-in
Default
item in a new record: No; item in a queried record: Yes
Usage Notes
• Use Item_Is_Valid to check whether the current status of a text item is valid.
• Set Item_Is_Valid to Yes to instruct Form Builder to treat any current data in an item as valid and
skip any subsequent validation. Set Item_Is_Valid to No to instruct Form Builder to treat any
current data in a text item as invalid and subject it to subsequent validation.

61
Item_Tab_Page property
Description
Specifies the tab page on which an item is placed.
Applies to item
Refer to Built-in
Default
None

62
Join Condition property
Description
Defines the relationship that links a record in the detail block with a record in the master block.
Applies to relation
Set Form Builder
Required/Optional required for a relation object
Usage Notes
You can specify a join condition with the following entries:
• an item name that exists in both the master block and the detail block (block_2.item_3)
• an equating condition of two item names, where one item exists in the master block and the other
item exists in the detail block
• a combination of item names and equating conditions
Join Condition restrictions
• Maximum length for a join condition is 255 characters.
Join Condition examples
Examples:
To link a detail block to its master block through the ORDID text item that is common to both blocks,
define the following join condition:
ORDID
To link the detail block to its master block through a number of text items, define the join condition as
follows:
block1.item1 = block2.item1 AND block1.item2 = block2.item2
Keep in mind that the join condition specifies the relationship between the items in each block, not
between the columns in the tables on which those blocks are based. Thus, the items specified must
actually exist in the form for the join condition to be valid.

63
Join Style property
Description
Specifies the join style of the graphic object as either Mitre, Bevel, or Round.
Set Form Builder
Default
Mitre

64
Justification property
Description
Specifies the text justification within the item. The allowable values for this property are as follows:
Value Description
Left Left-justified, regardless of Reading Order property.
Center Centered, regardless of Reading Order property.
Right Right-justified, regardless of Reading Order property.
Start Item text is aligned with the starting edge of the item bounding
box. The starting edge depends on the value of the item’s
Reading Order property.
Start is evaluated as Right alignment when the reading order is
Right To Left, and as Left alignment when the reading order is
Left to Right.
End Item text is aligned with the ending edge of the item bounding
box. The ending edge depends on the value of the item’s
Reading Order property.
End is evaluated as Left alignment when the reading order is
Right To Left, and as Right alignment when the reading order is
Left to Right.
Refer to Built-in
Default
Start
Usage Notes
• In unidirectional applications (reading order Left to Right), accept the default, Start, in most cases.
For unidirectional applications, Start gives exactly the same results as Left and End gives the same
results as Right.
• In bidirectional applications:
• If your data must be aligned with the item’s Reading Order, choose Start (the default).

65
• If your data must be aligned opposite to the item’s Reading Order, choose End.
• Unsupported by some window managers.

66
Keep Cursor Position property
Description
Specifies that the cursor position be the same upon re-entering the text item as when last exited.
Refer to Built-in
Default
No
Usage Notes
Use this property if you want to give the end user the flexibility to move the cursor to an item, then back
to the partially filled item, and have the cursor reposition itself to the end of the partial text.
Keep Cursor Position restrictions
Unsupported on some window managers.

67
Key Mode property
Description
Specifies how Form Builder uniquely identifies rows in the database. This property is included for
applications that will run against non-ORACLE data sources. For applications that will run against
ORACLE, use the default setting.
By default, the ORACLE database uses unique ROWID values to identify each row. Non-ORACLE
databases do not include the ROWID construct, but instead rely solely on unique primary key values to
identify unique rows. If you are creating a form to run against a non-ORACLE data source, you must use
primary keys, and set the Key Mode block property accordingly.
Value Description
Automatic (default) Specifies that Form Builder should use ROWID constructs
to identify unique rows in the datasource but only if the
datasource supports ROWID.
Non-Updateable Specifies that Form Builder should not include primary key
columns in any UPDATE statements. Use this setting if
your database does not allow primary key values to be
updated.
Unique Instructs Form Builder to use ROWID constructs to identify
unique rows in an ORACLE database.
Updateable Specifies that Form Builder should issue UPDATE
statements that include primary key values. Use this setting
if your database allows primary key columns to be updated
and you intend for the application to update primary key
values.
Applies to block
Refer to Built-in
Default
Unique
Usage Notes

68
When the Key Mode property is set to one of the primary key modes, you must identify the primary key
items in your form by setting the Enforce Primary Key block property to Yes for the block, and the
Primary Key item property to Yes for at least one item in the block.

69
Keyboard Accelerator property
Description
Specifies a logical function key to be associated with a menu item. Accelerator keys are named
ACCELERATOR1, ACCELERATOR2, and so on, through ACCELERATOR5. End users can select
the menu item by pressing the key or key combination that is mapped to the logical accelerator key.
Set Form Builder
Usage Notes
The mappings of logical accelerator keys to physical device keys is defined in the runtime resource file.
You must edit the resource file in Oracle Terminal to change the key mappings. You can also create
additional accelerator keys in Oracle Terminal (ACCELERATOR6, ACCELERATOR7, and so on),
which you can then associate with menu items in a menu module.
Keyboard Accelerator restrictions
• Not valid for separator menu items.
• Key mappings must not interfere with standard Form Builder key mappings.
• When running with bar-style menus, accelerator keys can be used only for items on the menu that is
currently displayed.

70
Keyboard Help Description property
Description
Specifies the key trigger description that is displayed in the runtime Keys help screen if the Display in
Keyboard Help property is set to Yes. An entry in the Keys screen includes a text description for the key
name and the physical keystroke associated with it, for example, Ctrl-S.
Applies to trigger
Set Form Builder
Default
blank
Usage Notes
• If you do not want the name or the description to appear in the Keys window, set the Display
Keyboard Help property to No. This is the default setting.
• If you want the name of the key that corresponds to the trigger and its default description to be
displayed in the Keys window, set the Display Keyboard Help property to Yes and leave the
Keyboard Help Description blank.
• If you want to replace the default key description, set the Display Keyboard Help property to Yes,
then enter the desired description in the Keyboard Help Description field.
Keyboard Help Description restrictions
Valid only for key triggers.

71
Keyboard Navigable property
Description
Determines whether the end user or the application can place the input focus in the item during default
navigation. When set to Yes for an item, the item is navigable. When set to No, Form Builder skips
over the item and enters the next navigable item in the default navigation sequence. The default
navigation sequence for items is defined by the order of items in the Object Navigator.
Applies to all items except chart items and display items
Set Form Builder, programmatically [NAVIGABLE]
Refer to Built-in
Default
Yes
Usage Notes
If Enabled or Visible is set to No (PROPERTY_FALSE for runtime), then the items’ or item instance’s
Keyboard navigable property is effectively false. At runtime, when the Enabled property is set to
PROPERTY_FALSE, the Keyboard_Navigable property is also set to PROPERTY_FALSE.
However, if the Enabled property is subsequently set back to PROPERTY_TRUE, the keyboard
Navigable property is NOT set to PROPERTY_TRUE, and must be changed explicitly.
• When Keyboard Navigable is specified at multiple levels (item instance, item, and block), the values
are ANDed together. This means that setting Keyboard Navigable to Yes (or NAVIGABLE to
PROPERTY_TRUE for runtime) has no effect at the item instance level unless it is set consistently
at the item level. For example, your user cannot navigate to an item instance if Keyboard Navigable
is true at the instance level, but not at the item level.
• You can use the GO_ITEM built-in procedure to navigate to an item that has its Keyboard
Navigable property set to No (PROPERTY_FALSE) for runtime.
Keyboard Navigable restrictions
• If you are using SET_ITEM_PROPERTY to set NAVIGABLE to true, then you must set item
properties as follows:
Enabled to Yes (PROPERTY_TRUE for runtime)
Visible to Yes (PROPERTY_TRUE for runtime)

72
Keyboard State property
Description
Specifies supported international keyboard states as Any, Roman Only, or Local Only.
Applies to item international
Set Form Builder
Default
Any

73
Label (Item) property
Description
Specifies the text label that displays for a button, check box, or radio button in a radio group.
Applies to button, check box, radio group button
Refer to Built-in
Default
blank

74
Label (Menu Item) property
Description
Specifies the text label for each menu item.
Refer to Built-in
Usage Notes
Each menu item has both a name and a label. The label, used only in the runtime GUI, may differ from
the name, which can be used programmatically.
Unlike the name, which must follow PL/SQL naming conventions, the label can include multiple words
and punctuation. For example,More Info... is an acceptable label, while the corresponding name would
be more_info.
When you create a new menu item in the Menu editor, Form Builder gives it a default name, like ITEM2,
and a default label, <New Item>. When you edit the item label in the Menu editor, making it, for
instance, "Show Keys," the menu item name remains ITEM2 until you change it in either the Object
Navigator or the Properties Palette.

75
Label (Menu Substitution Parameter) property
Description
Specifies the label that will prompt the end user to supply a value for the substitution parameter.
Set Form Builder
Label (Menu Substitution Parameter) restrictions
none

76
Label (Tab Page) property
Description
The label identifying the tab page. End users click the labelled tab to display the tab pages of a tab
canvas.
Applies to tab page
Refer to Built-in
Label (Tab Page) restrictions
none

77
Last_Block property
Description
Specifies the name of the block with the highest sequence number in the form, as indicated by the
sequence of blocks listed in the Object Navigator.
Set not settable
Refer to Built-in
GET_FORM_PROPERTY

78
Last_Item property
Description
Specifies the name of the item with the highest sequence number in the indicated block, as indicated by
the sequence of items listed in the Object Navigator.
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY

79
Last_Query property
Description
Specifies the SQL statement for the last query of the specified block.
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY

80
Layout Data Block property
Description
Specifies the name of the data block which the frame is associated with; the items within this block are
arranged within the frame. A block can only be associated with one frame. You cannot arrange a block’s
items within multiple frames.
Applies to frame
Set Form Builder
Default
NULL

81
Layout Style property
Description
Specifies the layout style for the items within the frame.
Form The default frame style. When Frame Style is set is to Form, Form Builder
arranges the items in a two-column format, with graphic text prompts
positioned to the left of each item.
Tabular When Frame Style is set to Tabular, Form Builder arranges the items next
to each other across a single row, with graphic text prompts above each
item.
Applies to frame
Set Form Builder
Default
Form

82
Length (Record Group) property
Description

83
Line Spacing property
Description
Specifies the line spacing of the text objext as Single, One-and-a-half, Double, Custom. If Custom is
selected, the Custom Spacing property determines the line spacing.
Set Form Builder
Default
Single

84
Line Width property
Description
Specifies the width of the object’s edge in points (1/72 inch). (Same as Graphics Builder property Edge
Width.)
Set Form Builder

85
List Item Value property
Description
Specifies the value associated with a specific radio.
Applies to radio button
Set Form Builder
Default
NULL
Usage Notes
When you leave the List Item Value field blank, the value associated with the radio button is NULL.
List Item Value restrictions
• Must be unique among values associated with radio button.

86
List of Values property
Description
Specifies the list of values (LOV) to attach to the text item. When an LOV is attached to a text item, end
users can navigate to the item and press [List of Values] to invoke the LOV. To alert end users that an
LOV is available, Form Builder displays the LOV list lamp on the message line when the input focus is
in a text item that has an attached LOV.
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
List of Values restrictions
The LOV must exist in the active form module.

87
List Style property
Description
Specifies the display style for the list item, either poplist, combo box, or Tlist. The poplist and combo
box styles take up less space than a Tlist, but end users must open the poplist or combo box to see list
elements. A Tlist remains "open," and end users can see more than one value at a time if the list is large
enough to display multiple values.
Applies to list item
Set Form Builder
Default
Poplist
Usage Notes
The display style you select for the list item has no effect on the data structure of the list item.

88
List Type property
Description
Specifies how you intend to reference the record group object on which the LOV will be based. Every
LOV has an associated record group from which it derives its values at runtime.
Applies to:
List of Values (LOV)
Set Form Builder
Default
Query
Usage Notes
Record Group Indicates that you intend to base the LOV on an existing record group.
When you select this option, you must choose the record group in the
Record Group property drop-down list. The record group you specify can
be either a static record group or a query record group, and must already
exist in the active form.
Old This option is included for compatibility with previous versions of Form
Builder. It cannot be used in new applications.
List Type restrictions
none

89
List X Position property
Description
Specifies the horizontal (X) coordinate of the upper left corner of the LOV relative to the screen. When
you attach an LOV to a text item by setting the List of Values property, you can also set the List X
Position and List Y Position properties to override the default display coordinates specified for the LOV.
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
Default
0; indicating that Form Builder should use the default LOV display horizontal (X) coordinate, as
specified by the List X Position property.
Usage Notes
• If you leave the List X Position property set to 0 and the List Y Position property set to 0, Form
Builder displays the LOV at the display coordinates you specified when you created the LOV. If
you specify position coordinates, the coordinates you specify override the LOV’s default position
coordinates.
• The List of Values property must be specified.

90
List Y Position property
Description
Specifies the vertical (Y) coordinate of the upper left corner of the LOV relative to the screen. When
you attach an LOV to a text item by setting the List of Values property, you can also set the List Y
Position and List X Position properties to override the default display coordinates specified for the LOV.
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
Default
0; indicating that Form Builder should use the default LOV display vertical (Y) coordinate, as specified
by the List Y Position property.
Usage Notes
• If you leave the List X Position property set to 0 and the List Y Position property set to 0, Form
Builder displays the LOV at the display coordinates you specified when you created the LOV. If
you specify position coordinates, the coordinates you specify override the LOV’s default position
coordinates.
• The List of Values property must be specified.

91
Listed in Data Block Menu/Data Block Description
Specifies whether the block should be listed in the block menu and, if so, the description that should be
used for the block.
Form Builder has a built-in block menu that allows end users to invoke a list of blocks in the current
form by pressing [Block Menu]. When the end user selects a block from the list, Form Builder navigates
to the first enterable item in the block.
Applies to block
Set Form Builder
Default
Yes. Block Description: For a new block, NULL; For an existing block, the block name at the time the
block was created.
Listed in Block Menu/Block Description restrictions
The block does not appear in the Block Menu if you set the Listed in Block Menu property to Yes but
leave the Block Description property blank.

92
Lock Procedure Arguments property
Description
locking data. The Lock Procedure Arguments property is valid only when the DML Data Target Type
Applies to block
Set Form Builder
Default
NULL

93
Lock Procedure Name property
Description
Specifies the name of the procedure to be used for locking data. The Lock Procedure Name property is
valid only when the DML Data Target Type property is set to Procedure.
Applies to block
Set Form Builder
Default
NULL

94
Lock Procedure Result Set Columns property
Description
Specifies the names and datatypes of the result set columns associated with the procedure for locking
data. The Lock Procedure Result Set Columns property is valid only when the DML Data Target Type
Applies to block
Set Form Builder
Default
NULL

95
Lock Record property
Description
Specifies that Form Builder should attempt to lock the row in the database that corresponds to the current
record in the block whenever the text item’s value is modified, either by the end user or
programmatically.
Refer to Built-in
Default
No
Usage Notes
• Set this property to Yes when the text item is a control item (an item not associated with a base table
column), but you still want Form Builder to lock the row in the database that corresponds to the
current record in the block.
• Useful for lookup text items where locking underlying record is required.
• To set the Lock Record property with SET_ITEM_PROPERTY, use the constant
LOCK_RECORD_ON_CHANGE.
Lock Record restrictions
Valid only when the item is a control item (Base Table Item property set to No) in a data block.

96
Locking Mode property
Description
Specifies when Form Builder tries to obtain database locks on rows that correspond to queried records in
the form. The following table describes the allowed settings for the Locking Mode property:
Value Description
Automatic
(default)
Identical to Immediate if the datasource is an Oracle database. For other
datasources, Form Builder determines the available locking facilities and
behaves as much like Immediate as possible.
Immediate Form Builder locks the corresponding row as soon as the end user presses a key
to enter or edit the value in a text item.
Delayed Form Builder locks the row only while it posts the transaction to the database,
not while the end user is editing the record. Form Builder prevents the commit
action from processing if values of the fields in the block have changed when
the user causes a commit action.
Applies to block
Refer to Built-in
Default
Automatic
Usage Notes
For most applications use the default setting of Automatic.
The Immediate setting remains for compatibility with existing applications, but there is no reason to use
it in new applications. Use Automatic instead.
The Delayed setting is useful for applications that must minimize the number of locks or the amount of
time that rows remain locked. Use delayed locking if the form’sIsolation Mode property has the value
Serializable.
The main drawbacks of delayed locking are
• The changes an end user makes to a block may need to be redone at commit time.
• Another user’s lock can force the first end user to choose between waiting indefinitely or abandoning
the changes.

97
Magic Item property
Description
Specifies one of the the following predefined menu items for custom menus: Cut, Copy, Paste, Clear,
Undo, About, Help, Quit, or Window. Magic menu items are automatically displayed in the native style
for the platform on which the form is being executed, with the appropriate accelerator key assigned.
Cut, Copy, Paste, Clear, Window, and Quit have built-in functionality supplied by Form Builder, while
the other magic menu items can have commands associated with them.
Set Form Builder
Default
Cut
Usage Notes
Setting Description
Cut, Copy,
Paste, Clear
These items perform the usual text-manipulation operations.
Form Builder supplies their functionality, so the designer may
not enter a command for these items.
Undo, About These items have no native functionality, so the designer must
enter a command for these items. Any type of command can be
used for these items, except Menu.
Help The command for the Help menu item must be Menu. The
designer provides the functionality of items on this submenu.
Quit Quit also has built-in functionality, so the designer may not
assign a command to this item.
Window The Window magic menu item presents a submenu of all open
windows, allowing the user to activate any of them. If the
Window magic menu item has a command that invokes a
submenu, that submenu will contain both the list of open widows
and the user-defined submenu items, in an order determined by
Form Builder. The command type for a magic Window item is
Null or Menu.

98
Magic Item restrictions
• Any given magic menu item may appear only once in the entire menu hierarchy for a given menu
module. For example, a menu containing the magic menu item Cut cannot be a submenu of two
different options in the menu module.
• Leave the magic menu item’s Icon, Keyboard Accelerator, and Hint properties blank.

99
Main Menu property
Description
Specifies the name of the individual menu in the document that is to be the main or starting menu at
runtime.
If you are creating a pulldown menu, you will not need to change this property: it is automatically set to
the name of the first menu you create, and updated thereafter if you change the name of that menu.
The Main Menu property is used mostly with full-screen menus, to limit the menus to which end users
have access. End users cannot navigate to any menu that is above the main menu in the menu module
hierarchy.
Applies to menu module
Set Form Builder
Default
blank
Usage Notes
When you attach the menu module to a form by setting the appropriate properties in the Form Module
property sheet, you can specify a different menu in the document to be the main menu by setting the
Initial Menu property.

100
Mapping of Other Values property
Description
Specifies how any fetched or assigned value that is not one of the pre-defined values associated with a
specific list element or radio button should be interpreted.
Applies to list item, radio group
Set Form Builder
Default
blank
Usage Notes
• Leave this property blank to indicate that other values are not allowed for this item or radio group.
Any queried record that contains a value other than the user-defined element value is silently
rejected. Any attempt to assign an other value is disallowed.
• Any value you specify must evaluate to one of the following references:
• the value associated with one of the list elements or radio groups
• the name (not the label) of one of the list elements

101
Maximize Allowed property
Description
Specifies that end users can resize the window by using the zooming capabilities provided by the runtime
window manager.
Applies to window
Set Form Builder
Default
Yes
Maximize Allowed restrictions
• Only valid when Resize Allowed is set to No

102
Maximum Length property
Description
Specifies the maximum length of the data value that can be stored in the item.
Applies to all items except buttons, image items, and chart items
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
Default
• For a database item, the length of the corresponding column in the database table. Note: If the item’s
data type is NUMBER, the maximum length will be set to the defined column length plus two, to
allow for the possible use of a minus sign (for negative values) and a decimal separator.
• For a control item, 30.
• For a LONG item, 240 bytes.
Usage Notes
• At runtime, Forms will increase the value of the Maximum Length propertyif the item’s format
mask requires a longer length. (The format mask may be either an explicit mask specified by the
form’s designer for this item, or one of the implicit masks used by Forms in its internal conversion
operations.)
• For CHAR values, the Maximum Length is 2000 characters.
Note: Bear these considerations in mind if you are writing applications for a multi-byte character set:
• Form Builder allows end users to enter the full number of single-byte characters, up to the
Maximum Length specified.
• If the end user enters a combination of single-byte and multi-byte characters that produce a string
whose total length in bytes exceeds the item's Maximum Length, the string will be truncated to the
nearest whole character and a warning will be displayed. To avoid this situation, consider raising
the Maximum Length for the item. (If Maximum Length exceeds the display width of the item,
Form Builder will automatically allow the end user to scroll the contents of the item.)

103
Maximum Length (Form Parameter) property
Description
Specifies the maximum length, in characters, of a form parameter of type CHAR.
Applies to form parameter
Set Form Builder
Default
For a parameter of type CHAR, 30
Maximum Length (Form Parameter) restrictions
• Maximum length of a CHAR parameter is 2000 bytes.

104
Maximum Length (Menu Substitution Parameter)
property
Description
Specifies the maximum length, in characters, of a menu substitution parameter.
Set Form Builder
Default
30

105
Maximum Objects Per Line property
Description
Specifies the maximum number of objects that can appear on each line within a frame.
When the Maximum Number of Frame Objects is set to 0 (the default), there is no maximum--Form
Builder arranges the maximum number of objects per line within a frame.
This property is valid when the Frame Style property is set to Form and the Vertical Fill property is set to
No.
Applies to frame
Set Form Builder
Default
0

106
Maximum Query Time property
Description
Provides the option to abort a query when the elapsed time of the query exceeds the value of this
property.
Applies to form, block
Set Form Builder, Programmatically
Refer to Built-in
Usage Notes
This property is only useful when the Query All Records property is set to Yes.

107
Maximum Records Fetched property
Description
Specifies the number of records fetched when running a query before the query is aborted.
Applies to form, block
Set Form Builder, Programmatically
Refer to Built-in
Usage Notes
Maximum Records Fetched is only useful when the properties Query Allowed and Query All Records are
set to Yes. Set the Maximum Records Fetched property to limit the records returned by a user’s query.

108
Menu Description property
Description
For applications running on character mode in the pull-down and bar menu display styles, this property
specifies the string that displays on the message line when the end user navigates to the menu. In full-
screen display style, this property specifies the string that identifies the menu module.
Set Form Builder
Default
The default document name
Menu Description restrictions
• Applicable for character mode applications only.

109
Menu Directory property
Description
Specifies the directory in which Form Builder should look for the .MMX runtime menu file. This
property is applicable only when you want Form Builder to locate the menu .MMX runfile through
database lookup, rather than direct reference.
When using database lookup, the menu module must be stored in the database. At runtime, Form
Builder queries the menu module definition stored in the database to find out the directory and filename
of the menu .MMX runfile. The Menu Directory and Menu Filename menu module properties specify
the path where Form Builder should look for the .MMX menu file.
Set Form Builder
Default
blank
Usage Notes
If you leave the directory path unspecified, Form Builder first searches the default directory for the file,
then searches any predefined search paths. For more information on search paths, refer to the Form
Builder documentation for your platform.
Menu Directory restrictions
Not valid when using direct reference to specify the location of the menu .MMX runfile. You use direct
reference when you attach a menu to a form by setting the Menu Source form module property to Yes.

110
Menu Filename property
Description
Specifies the name of the .MMX runtime menu file that Form Builder should look for at form startup.
This property is applicable only when you want Form Builder to locate the menu runfile through
database lookup, rather than direct reference.
To use database lookup, the menu module must be stored in the database. At runtime, Form Builder
queries the menu module definition stored in the database to find out the directory and filename of the
menu .MMX runfile. The Menu Directory and Menu Filename menu module properties specify the path
where Form Builder should look for the .MMX menu file.
Set Form Builder
Default
Module Name property
Usage Notes
If you leave the directory unspecified, Form Builder first searches the default directory for the file, then
searches any predefined search paths. For more information on search paths, refer to the Form Builder
documentation for your platform.
Menu Filename restrictions
• The .MMX file extension is not required.

111
Menu Item Code property
Description
Contains the PL/SQL commands for a menu item.
Applies to menu items
Set Form Builder
Usage Notes
Clicking the More… button opens the PL/SQL Editor for the menu item, allowing you to edit the
PL/SQL commands.

112
Menu Item Radio Group property
Description
Specifies the name of the radio group to which the current radio menu item belongs.
Set Form Builder
Usage Notes
Specify the same Radio Group for all radio items that belong to the same logical set.
Menu Item Radio Group restrictions
• Radio items must be adjacent to each other on the same menu.
• Only one radio group per individual menu is allowed.

113
Menu Item Type property
Description
Specifies the type of menu item: Plain, Check, Magic, Radio, or Separator. The type determines how the
item is displayed and whether the item can have an associated command.
Applies to:
menu items
Set Form Builder
Default
Plain
Usage Notes
The following menu item types are available:
• PlaiDefault. Standard text menu item.
Check Indicates a Boolean menu item that is either Yes or No, checked or
unchecked.
Whenever the end user selects a Check menu item Form Builder toggles the
state of that item and executes the command associated with that menu item,
if there is one.
Magic Indicates one of the the following predefined menu items: Cut, Copy,
Paste, Clear, Undo, About, Help, Quit, and Window. Magic menu items
are automatically displayed in the native style of the platform on which the
form is executed, in the position determined by the platform’s conventions,
with the appropriate accelerator key assigned. Cut, Copy, Paste, Clear,
Windows, and Quit have built-in functionality supplied by Form Builder,
while the other magic menu items require that commands be associated
with them.
Radio Indicates a BOOLEAN menu item that is part of a radio group. Enter a
radio group name in the Radio Group property field. One and only one
Radio menu item in a group is selected at any given time.
When the end user selects a Radio menu item, Form Builder toggles the
selection state of the item and executes its command, if there is one.
Separator A line or other cosmetic item. You specify a Separator menu item for the
purpose of separating other menu items on the menu. A Separator menu
item cannot be selected and therefore it cannot have a command associated
with it.
• You can use GET_MENU_ITEM_PROPERTY and SET_MENU_ITEM_PROPERTY to get and
set the state of check and radio menu items.
• Magic menu items Cut, Copy, Clear, and Paste are automatically enabled and disabled by Form

114
Builder. You can also use GET_MENU_ITEM_PROPERTY and
SET_MENU_ITEM_PROPERTY to get and set the state of magic menu items programmatically,
but the result of disabling magic menu items will vary, depending on the behavior of the native
platform.
Menu Item Type restrictions
The top-level menu should only have plain or magic menu items.

115
Menu Module property
Description
Specifies the name of the menu to use with this form. When this property is set to Default, Form Builder
runs the form with the default menu that is built in to every form. When left NULL, Form Builder runs
the form without any menu.
When any value other than Default or Null is specified, the Menu Source property determines how the
Menu Module property setting is interpreted:
• When the Menu Source property is Yes, the Menu Module property specifies the name of the menu
.MMX runfile that Form Builder should use with this form.
• When the Menu Source property is No, it specifies the name of the menu module in the database
that Form Builder should query at form startup to find out the name of the menu .MMX file to use
with this form.
Set Form Builder
Default
Default, indicating that Form Builder should run the form with the default form menu.

116
Menu Role property
Description
Specifies the security role that Form Builder should use to run the menu. When the Menu Role property
is specified, Form Builder runs the indicated menu as if the current end user were a member of the
security role specified.
Set Form Builder
Usage Notes
The Menu Role property is included for backward compatibility only. Its use is not recommended in
current applications.
In previous versions of Form Builder, the Menu Role property allowed designers to test a menu by
creating a master role that had access to all of the items in the menu, and then running the menu under
that role. You can obtain the same result by setting the menu module property Use Security to No. When
Use Security is No, all end users have access to all menu items, and you do not have to be a member of
any particular role to test your application.

117
Menu Source property
Description
Menu Source allows you to specify the location of the .MMX runfile when you attach a custom menu to
a form module. Form Builder loads the .MMX file at form startup.
Set Form Builder
Default
Yes
Usage Notes
Setting the Menu Source property allows you to specify the location of the menu .MMX runfile through
either direct reference or through database lookup. In most cases, you will want to use direct reference
to the file system. Database lookup is included for backward compatibility.
Direct
Reference
To refer directly to the .MMX file, set the Menu Source
property to Yes, then enter the path/filename of the .MMX file
in the Menu Module field.
Database
Lookup
To refer to the menu by way of database lookup, set the Menu
Source property to No, then enter the name of the menu
module stored in the database. At form startup, Form Builder
queries the menu module definition to look up the name of the
.MMX runfile it needs. (The Menu Module Menu Filename
and Menu Directory define the path to the .MMX file in the
file system.)
When the form is loaded at runtime, Form Builder locates the
.MMX file by querying the database to look up the pointer to
the .MMX file defined by the menu module Menu Filename
and Menu Directory properties.
The following table compares the property settings and database conditions required when attaching a
menu to a form through direct reference to those required for database lookup.
Condition or Property Direct
Reference
Database Lookup
Form Module Property:
"Menu Source"
Yes No
Form Module Property:
"Menu Module"
Name of .MMX
runfile
Name of .MMB menu design
document in database
Menu Module Property:
"Menu Directory/Menu
n/a Path/filename of .MMX file in
file system

118
Filename"
Database Connection Not required Required at form startup
Location of Menu .MMB at
Load Time
n/a Must be stored in database
The following diagrams compare using direct reference and database lookup when attaching a custom
menu to a form.

119
Menu Style property
Description
Specifies the menu display style Form Builder should use to run the custom menu specified by the Menu
Module property. Display style options are pull-down or bar.
Set Form Builder
Default
Pull-down
Menu Style restrictions
Not valid when the Menu Module property is set to DEFAULT. (The default menu runs only in pull-
down display style.)

120
Message property
Description
Specifies the message that is to be displayed in an alert.
Applies to alert
Refer to Built-in
SET_ALERT_PROPERTY
Message restrictions
Maximum of 200 characters. Note, however, that several factors affect the maximum number of
characters displayed, including the font chosen and the limitations of the runtime window manager.

121
Minimize Allowed property
Description
Specifies that a window can be iconified on window managers that support this feature.
Applies to window
Set Form Builder
Default
Yes
Minimize Allowed restrictions
Cannot be set for a root window: a root window is always iconifiable.

122
Minimized Title property
Description
Specifies the text string that should appear below an iconified window.
Applies to window
Set Form Builder
Default
No
Minimized Title restrictions
Only applicable when the Minimize Allowed property is set to Yes.

123
Modal property
Description
Specifies whether a window is to be modal. Modal windows require an end user to dismiss the window
before any other user interaction can continue.
Applies to window
Set Form Builder
Default
No
Modal restrictions
• When Modal is set to Yes, the following window properties are ignored:
• Close Allowed • Resize Allowed
• Icon Filename • Minimized Title
• Minimize Allowed • Inherit Menu
• Move Allowed • Maximize Allowed
• Show Vertical/Horizontal
Scroll Bar

124
Module_NLS_Lang property
Description
Specifies the complete current value of the NLS_LANG environment variable defined for the form, for
national language support. MODULE_NLS_LANG is the equivalent of concatenating the following
properties:
• MODULE_NLS_LANGUAGE (language only)
• MODULE_NLS_TERRITORY (territory only)
• MODULE_NLS_CHARACTER_SET (character set only)
Applies to form
Set Not settable from within Form Builder. Set at your operating system level.
Refer to Built-in
GET_FORM_PROPERTY
Default
Default is usually "America_American.WE8ISO8859P1," but all the defaults can be port-specific.

125
Module Roles property
Description
Specifies which database roles are available for items in this menu module.
Set Form Builder
Usage Notes
Use Menu Module Roles to construct the entire list of roles with access to this menu module, then use
Menu Item Roles to specify which of these roles should have access to a specific menu item.

126
Mouse Navigate property
Description
Specifies whether Form Builder should perform navigation to the item when the end user activates the
item with a mouse.
Applies to button, check box, list item, radio group
Set Form Builder
Refer to Built-in
Default
Yes
Usage Notes
When Mouse Navigate is No, Form Builder does not perform navigation to the item when the end user
activates it with the mouse. For example, a mouse click in a button or check box is not treated as a
navigational event. Form Builder fires any triggers defined for the button or check box (such as When-
Button-Pressed), but the input focus remains in the current item.
When Mouse Navigate is Yes, Form Builder navigates to the item, firing any appropriate navigation and
validation triggers on the way.
Mouse Navigate restrictions
Applies only in mouse-driven environments.

127
Mouse Navigation Limit property
Description
Determines how far outside the current item an end user can navigate with the mouse. Mouse Navigation
Limit can be set to the following settings:
Form (The default.) Allows end users to navigate to any item in the current form.
Block Allows end users to navigate only to items that are within the current block.
Record Allows end users to navigate only to items that are within the current
record.
Item Prevents end users from navigating out of the current item. This setting
prevents end users from navigating with the mouse at all.
Applies to form
Set Form Builder
Default
Form

128
Move Allowed property
Description
Specifies whether or not the window can be moved .
Windows can be moved from one location to another on the screen by the end user or programmatically
by way of the appropriate built-in subprogram.
Applies to window
Set Form Builder
Default
Yes
Usage Notes
In general, it is recommended that windows always be movable.
Move Allowed restrictions
Cannot be set to NO for a window with the name of ROOT_WINDOW. Such a window is always
movable.

129
Multi-Line property
Description
Determines whether the text item is a single-line or multi-line editing region.
Set Form Builder
Refer to Built-in
GET_ITEM_PROPERTY
Default
No
Usage Notes
Setting the Multi-line property Yes allows a text item to store multiple lines of text, but it does not
automatically make the item large enough to display multiple lines. It is up to you to set the Width,
Height, Font Size, and Maximum Length properties to ensure that the desired number of lines and
characters are displayed.
Single-line Pressing the carriage return key while the input focus is in a single-line text
item initiates a [Next Item] function.
Multi-line Pressing the carriage return key while the input focus is in a multi-line text
item starts a new line in the item.
Multi-Line restrictions
Valid only for text items with data type CHAR, ALPHA, or LONG.

130
Multi-Selection property
Description
Indicates whether multiple nodes may be selected at one time. If set to FALSE, attempting to select a
second node will deselect the first node, leaving only the second node selected.
Set Form Builder
Default
False

131
Name property
Description
Specifies the internal name of the object. Every object must have a valid name that conforms to Oracle
naming conventions.
Set Form Builder
Default
OBJECT_CLASS_N, where OBJECT_CLASS is the type of object, and N is the next available number in
the document; for example, BLOCK5 or EDITOR3.
Usage Notes
• For menu items and radio buttons, the Name property has unique characteristics:
• The Name property specifies an internal handle that does not display at runtime.
• The Name property is used to refer to the menu item or radio button in PL/SQL code.
• The Label property specifies the text label that displays for the menu item or current radio button.
For menu substitution parameters, the following restrictions apply:
• Restricted to a two-character identifier for the substitution parameter.
• Must be alphanumeric.
• Must start with an alphabetic character.
• When referencing the parameter in a menu command line, the parameter must be preceded by an
ampersand (&RN)
• In a PL/SQL reference, the parameter must be preceded by a colon (:SS).
Name restrictions
• Can be up to 30 characters long
• Must begin with a letter
• Can contain letters, numbers, and the special characters $, #, @ and _ (underscore)
• Are not case sensitive
• Must uniquely identify the object:
• Item names must be unique among item names in the same block
• Relation names must be unique among relations that have the same master block
• Cannot be set for the root window

132
Name examples
Example
ENAME, ADDRESS1, PHONE_NO1

133
Navigation Style property
Description
Determines how a Next Item or Previous Item operation is processed when the input focus is in the last
navigable item or first navigable item in the block, respectively.
Applies to block
Refer to Built-in
Default
Same Record
Usage Notes
Same Record The default navigation style. A Next Item operation from the block’s last
navigable item moves the input focus to the first navigable item in the
block, in that same record.
Change Record A Next Item operation from the block’s last navigable item moves the input
focus to the first navigable item in the block, in the next record. If the
current record is the last record in the block and there is no open query,
Form Builder creates a new record. If there is an open query in the block
(the block contains queried records), Form Builder retrieves additional
records as needed.
Change Block A Next Item operation from the block’s last navigable item moves the input
focus to the first navigable item in the first record of the next block.
Similarly, a Previous Item operation from the first navigable item in the
block moves the input focus to the last item in the current record of the
previous block. The Next Navigation Block and Previous Navigation
Block properties can be set to redefine a block’s "next" or "previous"
navigation block.

134
Next Navigation Block property
Description
Specifies the name of the block that is defined as the"next navigation block" with respect to this block.
By default, this is the block with the next higher sequence number in the form, as indicated by the order
of blocks listed in the Object Navigator. However, you can set this property to redefine a block’s "next"
block for navigation purposes.
Applies to block
Refer to Built-in
Default
The name of the block with the next higher sequence number, as indicated by the order of blocks listed in
the Object Navigator.
Usage Notes
Setting this property does not change the value of the NextBlock property.

135
Next Navigation Item property
Description
Specifies the name of the item that is defined as the "next navigation item" with respect to this current
item. By default, the next navigation item is the item with the next higher sequence as indicated by the
order of items in the Object Navigator. However, you can set this property to redefine the "next item"
for navigation purposes.
Applies to item
Refer to Built-in
Default
NULL. NULL indicates the default sequence, which is the name of the item with the next higher
sequence number.
Next Navigation Item restrictions
The item specified as Next Navigation Item must be in the same block as the current item.

136
NextBlock property
Description
Specifies the name of the block with the next higher sequence number in the form, as indicated by the
order of blocks listed in the Object Navigator.
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY
Usage Notes
• You can programmatically visit all of the blocks in a form by using GET_BLOCK_PROPERTY to
determine the First_Block and NextBlock values.
• The value of NextBlock is NULL when there is no block with a higher sequence number than the
current block.
• Setting the Next Navigation Block property has no effect on the value of NextBlock.

137
NextItem property
Description
Specifies the name of the item with the next higher sequence number in the block, as indicated by the
order of items listed in the Object Navigator.
Applies to item
Set not settable
Refer to Built-in
GET_ITEM_PROPERTY

138
Next_Detail_Relation property
Description
Returns the name of the relation that has the same detail block as the specified relation. If no such
relation exists, returns NULL.
Applies to relation
Set not settable
Refer to Built-in
GET_RELATION_PROPERTY
Usage Notes
Use this property with the FIRST_DETAIL_RELATION property to traverse a list of relations for a
given master block.

139
Next_Master_Relation property
Description
Returns the name of the next relation that has the same master block as the specified relation. If no such
relation exists, returns NULL.
Applies to relation
Set not settable
Refer to Built-in
GET_RELATION_PROPERTY
Usage Notes
Use this property with the FIRST_MASTER_RELATION property to traverse a list of relations for a
given master block.

140
Number of Items Displayed property
Description
Specifies the number of item instances displayed for the item when the item is in a multi-record block.
Setting Number of Items Displayed > 0 overrides the Number of Records Displayed block property.
Applies to item
Set Form Builder
Default
Zero. Zero indicates that the item should display the number of instances specified by the Number of
Records Displayed block property.
Usage:
Use Number of Items Displayed to create a single button, chart, OLE item, image, VBX control (in 16-
bit Microsoft Windows), or ActiveX control (in 32-bit Windows) as part of a multi-record block. For
instance, if Number of Records Displayed is set to 5 to create a multi-record block and you create a
button, by default you will get 5 buttons, one per record. To get only one button, set Number of Items
Displayed to 1.
Number of Items Displayed restrictions
Number of Items Displayed must be <= Number of Records Displayed block property setting.

141
Number of Records Buffered property
Description
Specifies the minimum number of records buffered in memory during a query in the block.
Applies to block
Set Form Builder
Default
NULL; which indicates the minimum setting allowed (the value set for the Number of Records Displayed
property plus a constant of 3).
Usage Notes
• Form Builder buffers any additional records beyond the maximum to a temporary file on disk.
• Improve processing speed by increasing the number of records buffered.
• Save memory by decreasing the number of records buffered. This can, however, result in slower
disk I/O.
• If you anticipate that the block may contain a large number of records either as the result of a query
or of heavy data entry, consider raising the Number of Records Buffered property to increase
performance.
• Consider lowering the Number of Records Buffered property if you anticipate retrieving large items,
such as image items, because of the amount of memory each item buffered may require.
Number of Records Buffered restrictions
• If you specify a number lower than the minimum, Form Builder returns an error when you attempt to
accept the value.

142
Number of Records Displayed property
Description
Specifies the maximum number of records that the block can display at one time. The default is 1
record. Setting Number of Records Displayed greater than 1 creates a multi-record block.
Applies to block
Set Form Builder
Refer to Built-in
GET_BLOCK_PROPERTY
Default
1

143
OLE Activation Style property
Description
Specifies the event that will activate the OLE containing item.
Applies to OLE Container
Set Form Builder
Default
Double Click
Usage Notes
Double Click The default OLE activation style. An OLE object becomes active by
double-clicking anywhere on the OLE object.
• Focus-i Navigating to the OLE object causes the OLE object to become active.
Manual An OLE object becomes active by selecting Edit or Open from the Object
submenu of the OLE popup menu. The Show OLE Popup Menu property
must be set to YES and the Object menu item must be set to displayed and
enabled. The OLE popup menu is accessible when the mouse cursor is on
the OLE object and the right mouse button is pressed.
If the Show OLE Popup Menu property is YES and the Object menu item is displayed and enabled, it is
also possible to manually activate the OLE object through the OLE popup
menu when the OLE Activation Style is Double Click or Focus-in.
OLE Activation Style restrictions

144
OLE Class property
Description
Determines what class of OLE objects can reside in an OLE container. The following settings are valid
for this property:
NULL The default OLE class. You can insert any kind of OLE object class
specified in the registration database in an OLE container.
other than NULL Only OLE objects from the specified class can be inserted in an OLE
container at runtime. The OLE object classes that are available for
selection depend on information contained in the registration database.
The content of the registration database is determined by the OLE server
applications installed on your computer.
Set Form Builder
Default
NULL
Usage Notes
You select a specific class if you want to create an application that allows end users to change the current
OLE object in the OLE container, but want to restrict the end users to creating OLE objects from a
particular class.
OLE Class restrictions

145
OLE In-place Activation property
Description
Specifies if OLE in-place activation is used for editing embedded OLE objects. The following settings
are valid for this property:
YES Turns on OLE in-place activation. OLE in-place activation is used for
editing embedded OLE objects; linked objects are activated with external
activation.
NO Turns off OLE in-place activation and turns on external activation.
External Activation is used for editing embedded or linked OLE objects.
Set Form Builder
Default
NO
OLE In-place Activation restrictions
• Valid only on Microsoft Windows and Macintosh.

146
OLE Inside-Out Support property
Description
Specifies if the OLE server of the embedded object allows inside-out object support during in-place
activation. Inside-out activation allows for more than one embedded object to have an active editing
window within an OLE container. The following settings are valid for this property:
YES Turns on inside-out object support for embedded objects that have the OLE
In-place Activation property set to Yes.
NO Turns off inside-out object support for embedded objects that have the OLE
in-place Activation property set to Yes.
Set Form Builder
Default
YES
OLE Inside-Out Support restrictions

147
OLE Popup Menu Items property
Description
Determines which OLE popup menu commands are displayed and enabled when the mouse cursor is on
the OLE object and and the right mouse button is pressed. The OLE popup menu commands manipulate
OLE objects. OLE popup menu commands and their actions include:
OLE Popup Menu
Command
Action
CUT Cuts an OLE object and places the content on the
clipboard.
COPY Copies an OLE object and places the content on
the clipboard.
PASTE Pastes the content from the clipboard to an OLE
container.
PASTE SPECIAL Pastes an OLE object from the clipboard to an
OLE container in a format other than the original
format.
INSERT OBJECT Inserts an OLE object in an OLE container.
DELETE OBJECT Deletes an OLE object from an OLE container.
LINKS Invokes a dialog that has settings to determine how
links are updated, edit linked source files, and
change links from one source file to another source
file.
OBJECT Depending on the OLE server, it is possible to
perform various operations on an OLE object.
Some examples include opening an OLE object,
editing an OLE object, and converting an OLE
object from one format to another.
Refer to Built-in
Default
Display On and Enable On for all menu commands

148
Usage Notes
• In the Form Builder, you can set each OLE popup menu command to exhibit the following
characteristics by selecting the appropriate check box:
Display Specifies whether the selected menu command is displayed.
Enable Specifies whether a menu command that has Display On is enabled or
disabled. A disabled item appears dimmed or grayed.
• In addition to setting OLE popup menu command properties in the Form Builder, you can set and
get OLE popup menu command properties programmatically. To set or get the OLE popup menu
commands programmatically, use a programmatic property name that corresponds to a menu
command. The following list includes each of the OLE popup menu commands and a corresponding
programmatic property name:
Menu Command Programmatic Property Name
Cut POPUPMENU_CUT_ITEM
Copy POPUPMENU_COPY_ITEM
Paste POPUPMENU_PASTE_ITEM
Paste Special POPUPMENU_PASTESPEC_ITEM
Insert Object POPUPMENU_INSOBJ_ITEM
Delete Object POPUPMENU DELOBJ ITEM
Links POPUPMENU_LINKS_ITEM
Object POPUPMENU_OBJECT_ITEM
• You can programmatically set the OLE popup menu command properties to any of the following
values:
DISPLAYED Specifies that an OLE popup menu command is displayed and enabled.
ENABLED Specifies that an OLE popup menu command is displayed and disabled. A
disabled item appears dimmed or grayed.
• HIDDESpecifies that an OLE popup menu command is not displayed on
the OLE popup menu. A command that is not displayed is not enabled.
In addition to the values that you can set programmatically, you can programmatically get the
following values from each of the OLE popup menu commands:
DISPLAYED Return value when an OLE popup menu command is displayed and
enabled.
ENABLED Return value when an OLE popup menu command is displayed and
disabled. A disabled item appears dimmed or grayed.
• HIDDEReturn value when an OLE popup menu command is not displayed
on the OLE popup menu. A command that is not displayed is not enabled.
UNSUPPORTED Return value when the OLE popup menu is not supported. This is the
return value for every platform except Microsoft Windows.

149
OLE Popup Menu Items restrictions

150
OLE Resize Style property
Description
Determines how an OLE object is displayed in an OLE container. The following settings are valid for
this property:
CLIP The default OLE resize style. An OLE object is cropped to fit into an OLE
container.
SCALE An OLE object is scaled to fit into an OLE container.
INITIAL An OLE container is resized to fit an OLE object at creation time only.
DYNAMIC An OLE container is resized to fit an OLE object whenever the OLE object
size changes.
Set Form Builder
Default
CLIP
OLE Resize Style restrictions

151
OLE Tenant Aspect property
Description
Determines how an OLE object appears in an OLE container.
Set Form Builder
Default
CONTENT
Usage Notes
CONTENT The default OLE tenant aspect. The content of an OLE object is displayed
in an OLE container. The content of the OLE object depends on the value
of the OLE Resize Style property and can either be clipped, scaled, or full
size.
ICO An icon of an OLE object is displayed in an OLE container. The default
icon is one that represents the OLE server application that created the OLE
object. You can choose which icon to use from the insert object dialog.
THUMBNAIL A reduced view of the OLE object is displayed in an OLE container.
An OLE object type is saved to the database in a LONG RAW column. When the OLE object is
queried from the database, make sure that it has the same OLE Tenant Aspect property setting as
that of the OLE object saved to the database. If the OLE Tenant Aspect property of the saved OLE
object is different from that of the queried OLE object, the record containing the object is
automatically LOCKED.
OLE Tenant Aspect restrictions

152
OLE Tenant Types property
Description
Specifies the type of OLE objects that can be tenants of the OLE container. The following settings are
valid for this property:
ANY The default OLE tenant type. Any OLE object can be a tenant of the OLE
container.
NONE No object can reside in the OLE container.
STATIC Only static OLE objects can be a tenant of the OLE container. A static
OLE object is a snapshot image of a linked OLE object that has a broken
link to its source. A static OLE object cannot be modified.
EMBEDDED Only an embedded OLE object can be a tenant of the OLE container.
LINKED Only a linked OLE object can be a tenant of the OLE container.
Set Form Builder
Default
ANY
OLE Tenant Types restrictions

153
Operating_System property
Description
Specifies the name of the current operating system, such as Microsoft WINDOWS, WIN32COMMON,
UNIX, Sun OS, MACINTOSH, VMS, and HP-UX.
Set not settable
Refer to Built-in
Usage Notes
Because the value returned by this property is platform-specific, refer to the Form Builder documentation
for your operating system if the platform you are using is not listed above.

154
Optimizer Hint property
Description
Specifies a hint string that Form Builder passes on to the RDBMS optimizer when constructing queries.
Using the optimizer can improve the performance of database transactions.
Applies to block
Set Designer, programmatically
Refer to Built-in
Restrictions:
Valid only for applications running against the Oracle7 Server or Oracle8 Server.
Usage Notes
Consider a form that contains a block named DeptBlock based on the DEPT table. If the end user enters
a criteria of " > 25 " for the DEPTNO column and executes the query, the default SELECT statement
that Form Builder generates to query the appropriate rows from the database is as follows:
SELECT DEPTNO,DNAME,LOC,ROWID
FROM DEPT
WHERE (DEPTNO > 25)
The designer can use SET_BLOCK_PROPERTY to set the Optimizer Hint property to request that the
Oracle7 Server attempt to optimize the SQL statement for best response time:
Set_Block_Property(’DeptBlock’,OPTIMIZER_HINT,’FIRST_ROWS’);
SELECT /*+ FIRST_ROWS */ DEPTNO,DNAME,LOC,ROWID
FROM DEPT
WHERE (DEPTNO > 25)
For more information on how to use this feature with Oracle7, refer to the following sources:
• Oracle7 Server Application Developer’s Guide, Chapter 5, "Tuning SQL Statements"
• Oracle7 Server Concepts Manual, Chapter 13, "The Optimizer"

155
Order By property
Description
See WHERE CLAUSE/ORDER BY CLAUSE.

156
Other Reports Parameters property
Description
A <keyword>=<value> list of parameters to include in the running of the report. For a list of valid
parameters, see the keyword list in the Report Builder online help.
Applies to Report Builder reports
Set Form Builder
Default
blank
Usage Notes:
When passing multi-word parameter values in the where-clause, the entire where-clause should be
enclosed in single quotes. When a name appears in such a multi-word parameter, then two single quotes
should also be used to begin and to end that name. For example, in order to pass the parameter value
where ename = ’MILLER’ it is necessary to code this as:
‘where ename = ‘‘MILLER’’’

157
Output_Date/Datetime_Format property
Description
Holds the current output date or datetime format mask established by the environment variable
FORMSnn_OUTPUT_DATE_FORMAT or FORMSnn_OUTPUT_DATETIME_FORMAT. Forms
uses these format masks as defaults in its runtime output processing.
There are two separate properties: Output_Date_Format and Output_Datetime_Format.
Set Not settable from within Form Builder.
Refer to Built-in

158
Parameter Data Type property
Description
Specifies what kinds of values Form Builder allows as input and how Form Builder displays those
values.
Applies to check box, display item, list item, radio group, text item, custom item, form parameter
Note: All data types do not apply to each item type.
Set Form Builder
Usage Notes
• It is recommended that you use only the standard data types CHAR, DATE, LONG, and NUMBER.
These data types are based on native ORACLE data types, and offer better performance and
application portability. The other data types are valid only for text items, and are included primarily
for compatibility with previous versions. You can achieve the same formatting characteristics by
using a standard data type with an appropriate format mask.
• The data type of a base table item must be compatible with the data type of the corresponding
database column. Use the CHAR data type for items that correspond to ORACLE VARCHAR2
database columns.
• Do not create items that correspond to database CHAR columns if those items will be used in
queries or as the join condition for a master-detail relation; use VARCHAR2 database columns
instead.
• Form Builder will perform the following actions on items, as appropriate:
• remove any trailing blanks
• change the item to NULL if it consists of all blanks
• remove leading zeros if the data type is NUMBER, INT, MONEY, RINT, RMONEY, or
RNUMBER (unless the item’s format mask permits leading zeros)
• The form parameter Parameter Data Type property supports the data types CHAR, DATE, and
NUMBER.
ALPHA
Contains any combination of letters (upper and/or lower case).
Default Blanks
Example "Employee", "SMITH"
CHAR
Supports VARCHAR2 up to 2000 characters. Contains any combination of the following characters:
• Letters (upper and/or lower case)
• Digits

159
• Blank spaces
• Special characters ($, #, @, and _)
Default Blanks
Example "100 Main Street", "CHAR_EXAMPLE_2"
DATE
Contains a valid date. You can display a DATE item in any other valid format by changing the item’s
format mask.
Default DD-MON-YY
character string.
The DATE data type
contains a ZERO time
component
.
Example 01-JAN-92
DATETIME
Contains a valid date and time.
Default DD-MON-YY HH24:MI[:SS]
character string.
The DATETIME data type contains a four digit year. If the year input to a
DATETIME data type is two digits, the year is interpreted as 00YY.
Example 31-DEC-88 23:59:59
EDATE
Contains a valid European date.
Default DD/MM/YY
Apply a format mask to produce the European date format.
01/06/93 (June 1, 1993)
INT
Contains any integer (signed or unsigned whole number).

160
Default 0
Example 1, 100, -1000
JDATE
Contains a valid Julian date.
Default MM/DD/YY
Apply a format mask to produce the Julian date format.
06/01/93 (June 1, 1993)
LONG
Contains any combination of up to 65,534 characters. Stored in ORACLE as variable-length character
strings.
Default Blanks
Restrictions Not allowed as a reference in the WHERE or ORDER BY clauses of any SELECT
statement.
LONG items are not queryable in Enter Query mode.
MONEY
Contains a signed or unsigned number to represent a sum of money.
Included for backward compatibility. Instead, use a format mask with a number to
produce the same result.
Example 10.95, 0.99, -15.47
NUMBER
Contains fixed or floating point numbers, in the range of 1.0x10-129 to 9.99x10124, with one or more of
the following characteristics:
• signed
• unsigned
• containing a decimal point
• in regular notation
• in scientific notation

161
• up to 38 digits of precision
NUMBER items refer to NUMBER columns in the database and Form Builder processes their values as
true numbers (not character strings).
Default 0
Restrictions Commas cannot be entered into a number item (e.g., 99,999). Use a format mask
instead.
Example -1, 1, 1.01, 10.001, 1.85E3
RINT
Displays integer values as right-justified.
Apply a format mask such as 999 to produce a right-justified number.
RMONEY
Displays MONEY values as right-justified.
Use the NUMBER data type
Apply a format mask such as $999.99 to produce a right-justified number.
RNUMBER
Displays NUMBER values as right-justified.
Apply a format mask such as 999.999 to produce a right-justified number.
TIME
Contains numbers and colons that refer to NUMBER columns in the database.
Default HH24:MI[:SS]
Use the DATETIME data type.
Apply a format mask to produce only the time.
Not allowed as a reference to DATE columns in the database.

162
Example :10:23:05
21:07:13

163
Parameter Initial Value (Form Parameter) property
Description
Specifies the value that Form Builder assigns the parameter at form startup.
Applies to Form Parameter
Set Form Builder
Default
NULL
Usage Notes
Any valid constant is a valid value for this property.

164
Menu Parameter Initial Value (Menu Substitution
Parameter) property
Description
Specifies the value that Form Builder assigns the parameter at form startup.
Set Form Builder

165
Password property
Description
Specifies the password of the current end user.
Set not settable
Refer to Built-in
Usage Notes
The Password property returns only the password. If you want a connect string as well, examine the
Connect_String property.

166
PLSQL_Date_Format property
Description
This property establishes the format mask used in converting date values when executing PL/SQL (for a
trigger or called function or procedure) within Forms, in the following cases:
• evaluating TO_DATE (char_value) or TO_DATE (date_value) with no explicit format mask
• assigning a CHAR value to a date variable, or vice versa.
Applies to entire Forms application (global value)
Refer to Built-in
• GET_APPLICATION_PROPERTY built-in
• SET_APPLICATION_PROPERTY built-in
Required/Optional optional. However, it is STRONGLY RECOMMENDED that, for a new
application, you set this property to a format mask containing full century and time information. It is
also recommended that this format mask be the same as the one specified in the Builtin_Date_Format
property.
Default
As noted above, it is strongly recommended that you explicitly set this value for a new application. If
you do not, the default value will be DD-MON-YY. (This value is used for compatibility with Release
4.5 and earlier.)
Compatibility with other Oracle products
In Oracle products other than Form Builder, PL/SQL version 2 does not necessarily use a default date
format mask of DD-MON-YY. Instead, it typically uses a format mask derived from the current NLS
environment. If for some reason you want your Forms application to exhibit the same behavior, you can
use the USER_NLS_DATE_FORMAT application property to get the current NLS date format mask,
and then assign it to the application’s PLSQL_DATE_FORMAT property.

167
PL/SQL Library Location property
Description
Shows the location of the attached PL/SQL library.
This property is set when you attach a PL/SQL library to a Forms module. If you requested that the
directory path be retained, this property will be the full pathname of the library. If you requested that the
directory path be removed, this property will be just the library name.
This property is displayed only for your information. You cannot set or change it through the property
palette.
Applies to PL/SQL libraries
Set Form Builder
Required/Optional display only.
Default none

168
PL/SQL Library Source property
Description
This property is set when you attach a PL/SQL library to a Forms module. It shows the source of this
PL/SQL library – either File or Database.
This property is displayed only for your information. You cannot set or change it through the property
palette.
Applies to PL/SQL libraries
Set Form Builder
Required/Optional display only
Default File

169
Popup Menu property
Description
Specifies the popup menu to display for the canvas or item.
Applies to canvases and items
Set not settable
Default
NULL
Refer to Built-in
GET_MENU_ITEM_PROPERTY
• SET__MENU_ITEM_PROPERTY
Note: ENABLED, DISABLED, and LABEL are the only properties valid for popup menus.
Popup Menu restrictions
The popup menu must be defined within the current form module.
• You cannot attach a popup menu to individual radio buttons, but you can assign a popup menu to a
radio group.

170
Precompute Summaries property
Description
Specifies that the value of any summarized item in a data block is computed before the normal query is
issued on the block. Form Builder issues a special query that selects all records (in the database) of the
summarized item and performs the summary operation (sum, count, etc.) over all the records.
Applies to block
Set Form Builder
Required/Optional Required if the block contains summarized items and the block’s Query All Records
property is set to No.
Default
No
Usage Notes
When an end user executes a query in a block with Precompute Summaries set to Yes, Form Builder fires
the Pre-Query trigger (if any) once before it executes the special query. Form Builder fires the Pre-
Select trigger (if any) twice: once just before executing the special query, and again just before
executing the normal query.
Precompute Summaries restrictions
You cannot set Precompute Summaries to Yes if any of the following are true: (1) the block contains a
summarized control item, (2) a minimize or maximize operation is performed on a summarized item
in the block, (3) the block’s Query Data Source is a stored procedure or transactional triggers (must be
a table or sub-query), or (4) the block contains a checkbox item, list item, or radio group with an
empty Other Values property..
• Read consistency cannot be guaranteed unless (1) the form is running against an Oracle7.3
database, and (2) the form-level Isolation Mode property is set to Serializable.

171
Prevent Masterless Operations property
Description
Specifies whether end users should be allowed to query or insert records in a block that is a detail block
in a master-detail relation. When set to Yes, Form Builder does not allow records to be inserted in the
detail block when there is no master record in the master block, and does not allow querying in the detail
block when there is no master record that came from the database.
When Prevent Masterless Operation is Yes, Form Builder displays an appropriate message when end
users attempt to insert or query a record:
FRM-41105: Cannot create records without a parent record.
FRM-41106: Cannot query records without a parent record.
Applies to relation
Refer to Built-in
Default
No

172
Previous Navigation Block property
Description
Specifies the name of the block that is defined as the "previous navigation block" with respect to this
block. By default, this is the block with the next lower sequence in the form, as indicated by the order of
blocks in the Object Navigator. However, you can set this property to redefine a block’s "previous"
block for navigation purposes.
Applies to block
Refer to Built-in
Default
The name of the block with the next lower sequence in the form.
Usage Notes
Setting this property has no effect on the value of the PreviousBlock property.

173
Previous Navigation Item property
Description
Specifies the name of the item that is defined as the"previous navigation item" with respect to the current
item. By default, this is the item with the next lower sequence in the form, as indicated by the order of
items in the Object Navigator. However, you can set this property to redefine the "previous item" for
navigation purposes.
Applies to item
Refer to Built-in
Default
NULL. NULL indicates the default, which is the name of the item with the next lower sequence in the
form.
Previous Navigation Item restrictions
The item specified as Previous Navigation Item must be in the same block as the current item.

174
PreviousBlock property
Description
Specifies the name of the block with the next lower sequence in the form, as indicated by the order of
blocks in the Object Navigator.
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY
Usage Notes
• You may use this property with the First_Block or Last_Block form properties to traverse a list of
blocks.
• The value of PreviousBlock is NULL when there is no block with a lower sequence number than the
current block.
• Setting the Previous Navigation Block property has no effect on the value of PreviousBlock.

175
PreviousItem property
Description
Specifies the name of the item with the next lower sequence number in the block, as indicated by the
order of items in the Object Navigator.
Applies to item
Set not settable
Refer to Built-in
GET_ITEM_PROPERTY

176
Primary Canvas property
Description
Specifies the canvas that is to be the window’sprimary content view. At runtime, Form Builder always
attempts to display the primary view in the window. For example, when you display a window for the
first time during a session by executing the SHOW_WINDOW built-in procedure, Form Builder displays
the window with its primary content view.
If, however, Form Builder needs to display a different content view because of navigation to an item on
that view, the primary content view is superseded by the target view.
Applies to window
Set Form Builder
Default
NULL
Required/Optional Required only for a window that will be shown programmatically, rather than in
response to navigation to an item on a canvas assigned to the window.
Primary Canvas restrictions
The specified view must be a content view (Canvas Type property set to Content), and must be assigned
to the indicated window (by setting the Window canvas property).

177
Primary Key (Item) property
Description
Indicates that the item is a base table item in a data block and that it corresponds to a primary key
column in the base table. Form Builder requires values in primary key items to be unique.
Refer to Built-in
Default
No
Primary Key (Item) restrictions
The Enforce Primary Key block property must be set to Yes for the item’s owning block.

178
Program Unit Text property
Description
Specifies the PL/SQL code that a program unit contains. When you click on More… in the Property
Palette the Program Unit Editor is invoked.
Applies to program unit
Set Form Builder

179
Prompt property
Description
Specifies the text label that displays for an item.
Applies to item prompt
Refer to Built-in
Default
blank

180
Prompt Alignment property
Description
Specifies how the prompt is aligned along the item’s edge, either Start, End, or Center.
Set Form Builder, programmatically (Note: When you use this property in a PL/SQL program, replace
the spaces with underscores: Prompt_Alignment.)
Refer to Built-in
Default
Start

181
Prompt Alignment Offset property
Description
Specifies the prompt’salignment offset.
the spaces with underscores: Prompt_Alignment_Offset.)
Refer to Built-in
Default
blank

182
Prompt Attachment Edge property
Description
Specifies which edge the prompt should be attached to, either Start, End, Top, or Bottom.
the spaces with underscores: Prompt_Attachment_Edge.)
Refer to Built-in
Default
Start

183
Prompt Attachment Offset property
Description
Specifies the distance between the item and its prompt.
the spaces with underscores: Prompt_Attachment_Offset.)
Refer to Built-in
Default
blank

184
Prompt Background Color property
Description
The color of the object’s or background region.
Applies to item prompt, radio button
the spaces with underscores: Prompt_Background_Color.)
Default
Unspecified
Refer to Built-in

185
Prompt Display Style property
Description
Specifies the prompt’sdisplay style.
First Record Form Builder displays a prompt beside the first record.
• HiddeForm Builder does not display a prompt.
All Records Form Builder displays a prompt beside each record.
the spaces with underscores: Prompt_Display_Style.)
Refer to Built-in
Default
First Record

186
Prompt Fill Pattern property
Description
Applies to item, item prompt's, radio button
the spaces with underscores: Prompt_Fill_Pattern.)
Default
Unspecified
Refer to Built-in

187
Prompt Font Name property
Description
system-dependent.
Applies to item item prompt, radio button
the spaces with underscores: Prompt_Font_Name.)
Default
Unspecified
Refer to Built-in

188
Prompt Font Size property
Description
The size of the font, specified in points.
Applies to item, item prompt, radio button
the spaces with underscores: Prompt_Font_Size.)
Default
Unspecified
Refer to Built-in

189
Prompt Font Spacing property
Description
Specifies the width of the font (i.e., the amount of space between characters, or kerning).
the spaces with underscores: Prompt_Font_Spacing.)
Default
Unspecified
Refer to Built-in

190
Prompt Font Style property
Description
Specifies the style of the font.
the spaces with underscores: Prompt_Font_Style.)
Default
Unspecified
Refer to Built-in

191
Prompt Font Weight property
Description
Specifies the weight of the font.
the spaces with underscores: Prompt_Font_Weight.)
Default
Unspecified
Refer to Built-in

192
Prompt Foreground Color property
Description
the item.
the spaces with underscores: Prompt_Foreground_Color.)
Default
Unspecified
Refer to Built-in

193
Prompt Justification property
Description
Specifies justification of the prompt as either Left, Right, Center, Start, or End.
Set Form Builder
Default
Start

194
Prompt Reading Order property
Description
Specifies the prompt’sreading order, either Default, Left to Right, or Right to Left.
Refer to Built-in
Default
Default

195
Prompt Visual Attribute Group property
Description
Specifies the named visual attribute that should be applied to the prompt at runtime.
Refer to Built-in
Default
Default

196
Prompt_White_On_Black property
Description
Specifies that the object is to appear on a monochrome bitmap display device as white text on a black
background.
Applies to item, radio button
Default
Unspecified
Refer to Built-in

197
Property Class property
Description
Specifies the name of the property class from which the object can inherit property settings.
Set Form Builder
Default
Null

198
Query All Records property
Description
Specifies whether all the records matching the query criteria should be fetched into the data block when a
query is executed.
Yes - Fetches all records from query; equivalent to executing the EXECUTE_QUERY
(ALL_RECORDS) built-in.
No - Fetches the number of records specified by the Query Array Size block property.
Applies to block
Set Form Builder
Refer to Built-in
Default
No
Required/Optional Required if a data block contains summarized items, and the block’s Precompute
Summaries property is set to No.

199
Query Allowed (Block) property
Description
Specifies whether Form Builder should allow the end user or the application to execute a query in the
block. When Query Allowed is No, Form Builder displays the following message if the end user attempts
to query the block:
FRM-40360: Cannot query records here.
Applies to block
Refer to Built-in
Default
Yes
Restrictions:
When the Query Allowed block property is Yes, the Query Allowed item property must be set to Yes for
at least one item in the block.

200
Query Allowed (Item) property
Description
Determines if the item can be included in a query against the base table of the owning block.
Refer to Built-in
Default
Yes; however if the item is part of the foreign key in the detail block of a master-detail block relation,
Form Builder sets this property to No.
Usage Notes
To set the Query Allowed (Item) property programmatically, use the constant QUERYABLE.
Query Allowed (Item) restrictions
• The Visible property must also be set to Yes.
• Items with the data type LONG cannot be directly queried.

201
Query Array Size property
Description
Specifies the maximum number of records that Form Builder should fetch from the database at one time.
Applies to block
Set Form Builder
Refer to Built-in
GET_BLOCK_PROPERTY
Default
The number of records the block can display, as indicated by the Number of Records Displayed block
property.
Usage Notes
A size of 1 provides the fastest perceived response time, because Form Builder fetches and displays only
1 record at a time. By contrast, a size of 10 fetches up to 10 records before displaying any of them,
however, the larger size reduces overall processing time by making fewer calls to the database for
records.
Query Array Size restrictions
• There is no maximum.

202
Query Data Source Arguments property
Description
querying data. The Query Procedure Arguments property is valid only when the Query Data Source
Type property is set to Procedure.
Applies to block
Set Form Builder
Default
NULL

203
Query Data Source Columns property
Description
Specifies the names and datatypes of the columns associated with the block’s query data source. The
Query Data Source Columns property is valid only when the Query Data Source Type property is set to
Table, Sub-query, or Procedure.
Applies to block
Set Form Builder
Default
NULL

204
Query Data Source Name property
Description
Specifies the name of the block’s query data source.
The Query Data Source Name property is valid only when the Query Data Source Type property is set to
Table, Sub-Query, or Procedure.
Applies to block
Refer to Built-in
Default
NULL
Query Data Source Name restrictions
Prior to setting the Query Data Source Name property you must perform a COMMIT_FORM or a
CLEAR_FORM.

205
Query Data Source Type property
Description
Specifies the query data source type for the block. A query data source type can be a Table, Procedure,
Transactional trigger, or FROM clause query.
Applies to block
Refer to Built-in
GET_BLOCK_PROPERTY
Default
Table

206
Query Length property
Description
Specifies the number of characters an end user is allowed to enter in the text item when the form is Enter
Query mode.
Set Form Builder
Default
The value of the item’s Maximum Length property.
Usage Notes
You can make the query length greater than the Maximum Length when you want to allow the end user
to enter complex query conditions. For example, a query length of 5 allows an end user to enter the
query condition !=500 in a text item with a Maximum Length of 3.
Query Length restrictions
• The maximum query length is 255 characters.

207
Query Name property
Description
Specifies the name of the query in the report with which to associate the forms block.
Set Form Builder
Default
blank

208
Query Only property
Description
Specifies that an item can be queried but that it should not be included in any INSERT or UPDATE
statement that Form Builder issues for the block at runtime.
Applies to check box, radio group, list item, image item, text item, custom item (OLE)
Default
No
Refer to Built-in

209
Query_Hits property
Description
Specifies the NUMBER value that indicates the number of records identified by the COUNT_QUERY
operation. If this value is examined while records are being retrieved from a query, QUERY_HITS
specifies the number of records that have been retrieved.
This property is included primarily for applications that will run against non-ORACLE data sources.
Applies to block
Refer to Built-in
Usage Notes
This property can be used in several ways:
• In an application that runs against a non-ORACLE data source, use
SET_BLOCK_PROPERTY(QUERY_HITS) in an On-Count trigger to inform Form Builder of the
number of records that a query will return. This allows you to implement count query processing
equivalent to Form Builder default Count Query processing.
• Use GET_BLOCK_PROPERTY(QUERY_HITS) during Count Query processing to examine the
number of records a query will potentially retrieve.
• Use GET_BLOCK_PROPERTY(QUERY_HITS) during fetch processing to examine the number of
records that have been retrieved by the query so far and placed on the block’s list of records.
Query_Hits restrictions
Set this property greater than or equal to 0.

210
Query_Options property
Description
Specifies the type of query operation Form Builder would be doing by default if you had not
circumvented default processing. This property is included for applications that will run against non-
ORACLE data sources.
Values for this property include:
• VIEW
• FOR_UPDATE
• COUNT_QUERY
• NULL
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY

211
Radio Button Value Property
Description
Specifies the value associated with a radio button item in a radio group.
Applies to radio button
Set Form Builder
Default
blank

212
Raise on Entry property
Description
For a canvas that is displayed in the same window with one or more other canvases, Raise on Entry
specifies how Form Builder should display the canvas when the end user or the application navigates to
an item on the canvas.
• When Raise on Entry is No, Form Builder raises the view in front of all other views in the window
only if the target item is behind another view.
• When Raise on Entry is Yes, Form Builder always raises the view to the front of the window when
the end user or the application navigates to any item on the view.
Applies to canvas
Set Form Builder
Default
No
Raise on Entry restrictions
Applicable only when more than one canvas is assigned to the same window.

213
Reading Order property
Description
Specifies the reading order for groups of words (segments) in the same language within a single text
item.
Reading Order allows you to control the display of bilingual text items, text items that include segments
in both Roman and Local languages. (The Reading Order property has no effect on text items composed
of a single language.)
The allowable values for this property are:
Value Description
Default Text item inherits the reading order specified by its canvas
Language Direction property setting.
Right-To-Left Item reading order is right-to-left.
Left-To-Right Item reading order is left-to-right.
Set Form Builder
Refer to Built-in
Default
Default
Usage Notes
• In most cases, you will not need to explicitly set the Reading Order property (the Default setting will
provide the functionality you need). Use the Reading Order property only when you need to
override the default reading order for an item.
• To get or set the Reading Order property programmatically, use the Language Direction property.
• To display a Local segment in Right-To-Left mode and a Roman segment in Left-To-Right, use the
Default value.
• If your item text is mostly Local, choose the Right-To-Left value.
• If your item text is mostly Roman, choose the Left-To-Right value.

214
Real Unit property
Description
When the Coordinate System property is set to Real, the Real Unit property specifies the real units to be
used for specifying size and position coordinates in the form. Real units can be centimeters, inches,
pixels, points, or decipoints. (A point is 1/72nd of an inch.)
Form Builder interprets all size and position coordinates specified in the form in the real units you
specify here. When you convert from one real unit to another, some loss of precision may occur for
existing object size and position values.
Set Form Builder
Default
Centimeter
Real Unit restrictions
Valid only when the coordinate system property is set to Real.

215
Record Group property
Description
Specifies the name of the record group from which the LOV or hierarchical tree derives its values.
Applies to:
LOV, hierarchical tree
Refer to Built-in
GET_LOV_PROPERTY (GROUP_NAME)
SET_LOV_PROPERTY (GROUP_NAME)
POPULATE_TREE
POPULATE_GROUP_FROM_TREE
Default
Null
Required/Optional Required for LOV, Optional for hierarchical tree
Usage Notes
An LOV displays the records stored in its underlying record group. Each LOV must be based on a record
group. A record group can be populated by a query (query record group) or by fixed values (static record
group).

216
Record Group Fetch Size property
Description
Specifies the size of the record group to be fetched. A larger fetch size reduces the number of fetches
required to obtain the record group. For example, a record group of 5000 records will require 500 trips
to be fetched if Record Group Fetch Size is set to 10, but only 5 trips if Record Group Fetch Size is set
to 1000.
Applies to record group functional
Set Form Builder
Default
20
Usage Notes
Only available when Record Group Type is set to Query.

217
Record Group Query property
Description
Specifies the SELECT statement for query associated with the record group.
Applies to record group
Refer to Built-in
POPULATE_GROUP_WITH_QUERY

218
Record Group Type property
Description
Specifies the type of record group, either Static or Query:
Static Specifies that the record group is constructed of explicitly defined column
names and column values. The values of a static record group are
specified at design time and cannot be changed at runtime.
Query Specifies that the record group is associated with a SELECT statement, and
thus can be populated dynamically at runtime. When you select this option,
enter the SELECT statement in the multi-line field provided, then choose
Apply.
Applies to:
record group
Set Form Builder
Default
Query

219
Record Orientation property
Description
Determines the orientation of records in the block, either horizontal records or vertical records. When
you set this property, Form Builder adjusts the display position of items in the block accordingly.
Applies to block
Set Form Builder
Default
Vertical records
Usage Notes
You can also set this property when you create a block in the New Block window by setting the
Orientation option to either Vertical or Horizontal.
Record Orientation restrictions
Valid only for a multi-record block (Number of Records Displayed property set greater than 1).

220
Records_to_Fetch property
Description
Returns the number of records Form Builder expects an On-Fetch trigger to fetch and create as queried
records.
You can programmatically examine the value of Records_To_Fetch when you are using transactional
triggers to replace default Form Builder transaction processing when running against a non-ORACLE
data source.
Applies to block
Set not settable
Refer to Built-in
GET_BLOCK_PROPERTY
Usage Notes
Records_To_Fetch is defined only within the scope of an On-Fetch trigger.
The first time the On-Fetch trigger fires, the value of Records_To_Fetch is either the array size (as
specified by the Query Array Size block property) or the number of records displayed + 1, whichever is
larger.
If the On-Fetch trigger creates this many queried records, the next time the On-Fetch trigger fires, the
value of Records_To_Fetch will be the same number.
If, however, the On-Fetch trigger creates fewer records than the value of Records_To_Fetch and returns
without raising Form_trigger_Failure, Form Builder will fire the On-Fetch trigger again.
Records_To_Fetch will be the set to its previous value minus the number of queried records created by
the previous firing of the On-Fetch trigger.
This behavior continues until one of the following events occurs:
• The trigger does not create a single queried record (signaling a successful end of fetch).
• The expected number of queried records gets created.
• The trigger raises a Form_trigger_Failure (signaling that the fetch aborted with an error and fetch
processing should halt).
Records_to_Fetch examples
Example
/*
** Call a client-side package function to retrieve
** the proper number of rows from a package cursor.
*/
DECLARE
j NUMBER := Get_Block_Property(blk_name, RECORDS_TO_FETCH);
emprow emp%ROWTYPE;
BEGIN

221
FOR ctr IN 1..j LOOP
/* Try to get the next row.*/
EXIT WHEN NOT MyPackage.Get_Next_Row(emprow);
:Emp.rowid := emprow.ROWID;
:Emp.empno := emprow.EMPNO;
:Emp.ename := emprow.ENAME;
:
:
END LOOP;
END;

222
Relation Type property
Description
Specifies whether the link between the master block and detail block is a relational join or an object REF
pointer.
Applies to master-detail relations
Set Form Builder
Default
Join
Usage Notes
Valid values are Join (indicating a relational join) or REF (indicating a REF column in one block
pointing to referenced data in the other block).
When the link is via a REF, see also the Detail Reference property.
When the link is via a join, see also the Join Condition property.

223
Rendered property
Description
Specifies that the item is to be displayed as a rendered object when it does not have focus.
Applies to text item, display item
Set Form Builder
Default
Yes
Usage Notes
Use the Rendered property to conserve system resources. A rendered item does not require system
resources until it receives focus. When a rendered item no longer has focus, the resources required to
display it are released.

224
Report Destination Format property
Description
In bit-mapped environments, this property specifies the printer driver to be used when the Report
Destination Type property is File. In character-mode environments, it specifies the characteristics of the
printer named in report Destination name property.
Possible valus are any valid destination format not to exceed 1K in length. Examples of valid values for
this keyword are hpl, hplwide, dec, decwide, decland, dec180, dflt, wide, etc. Ask your System
Administrator for a list of valid destination formats. In addition, Report Builder supports the following
destination formats:
PDF Means that the report output will be sent to a file that can
be read by a PDF viewer. PDF output is based upon the
currently configured printer for your system. The drivers
for the currently selected printer is used to produce the
output; you must have a printer configured for the
machine on which you are running the report.
HTML Means that the report output will be sent to a file that can
be read by an HTML 3.0 compliant browser (e.g.,
Netscape 2.2).
HTMLCS
S
Means that the report output sent to a file will include
style sheet extensions that can be read by an HTML 3.0
compliant browser that supports cascading style sheets.
HTMLCS
SIE
Means that the report output sent to a file will include
style sheet extensions that can be read by Microsoft
Internet Explorer 3.x.
RTF Means that the report output will be sent to a file that can
be read by standard word processors (such as Microsoft
Word). Note that when you open the file in MS Word,
you must choose View->Page Layout to view all the
graphics and objects in your report.
DELIMIT
ED
Means that the report output will be sent to a file that can
be read by standard spreadsheet utilities, such as
Microsoft Excel. Note that you must also specify a
DELIMITER.
For more information about this property, see DESFORMAT under the index category Command Line
Arguments in the Report Builder online help.
Applies to report reports
Set Form Builder
Default
blank

225
Report Destination Name property
Description
Name of the file, printer, Interoffice directory, or email user ID (or distribution list) to which the report
output will be sent. Possible values are any of the following not to exceed 1K in length:
• a filename (if Report Destination Type property is File or Localfile)
• a printer name (if Report Destination Type property is Printer)
• email name or distribution name list (if Report Destination Type property is Mail).
To send the report output via email, specify the email ID as you
do in your email application (any MAPI-compliant application on
Windows, such as Oracle InterOffice, or your native mail
application on UNIX). You can specify multiple usernames by
enclosing the names in parentheses and separating them by commas
(e.g., (name, name, . . .name)). For printer names, you can
optionally specify a port. For example:
printer,LPT1:
printer,FILE:
Or, if the Report Destination Type property is Interoffice:
/FOLDERS/directory/reportname
For more information about this property, see DESNAME under the index category Command Line
Arguments in the Report Builder online help.
Set Form Builder
Default
blank

226
Report Destination Type property
Description
Destination to which you want the output to be sent. Possible values are Screen, File, Printer, Preview,
Mail, and Interoffice. For more information about this property, see DESTYPE under the index category
Command Line Arguments in the Report Builder online help.
SCREEN Screen routes the output to the Previewer for
interactive viewing. This value is valid only for when
running the report in Runtime mode (not Batch).
Font aliasing is not performed.
FILE File saves the output to a file named in Report
Destination Name.
PRINTER Printer routes the output to the printer named in
Report Destination Name.
PREVIEW Preview routes the output to the Previewer for
interactive viewing. However, Preview causes the
output to be formatted as Postscript output. The
Previewer will use the Report Destination Name
property to determine which printer’s fonts to use to
display the output. Font aliasing is performed for
Preview.
MAIL Mail routes the output to the mail users specified in
Report Destination Name. You can send mail to any
mail system that is MAPI-compliant or has the
service provider driver installed. The report is sent
as an attached file.
INTEROFFIC
E
routes the output to the Oracle InterOffice mail users
specified in Report Destination Name. By
specifying this value, you store the report output in
InterOffice as a repository.
Set Form Builder
Default
File

227
Report Server property
Description
Specifies the Report Server against which you can run your Report.
Set Form Builder
Default
blank

228
Required (Item) property
Description
When a new record is being entered, specifies that the item is invalid when its value is NULL.
Applies to list item, text item
Refer to Built-in
Default
No
Usage Notes
When an item has Required set to Yes, and item-level validation is in effect, by default Form Builder will
not allow navigation out of the item until a valid value is entered. To allow the end user to move freely
among the items in the record, set the Defer Required Enforcement property to Yes. This will postpone
enforcement of the Required attribute from item validation to record validation.
Even when Required is set to Yes, there are circumstances when an item’s value could be NULL. Form
Builder checks for required items as part of its validation process: each item in a new record is subject to
validation, but queried data is presumed to be valid and an item is not validated unless it is changed. For
example, if the record already exists and is queried from the database, the item that would be Required
could come in as NULL.
Setting a poplist’s or T-list’s Required property may affect the values the list will display: When
selected, an instance of a poplist will display an extra null value if its current value is NULL or if its
effective Required property is No (false). When selecting the current value of an instance of a T-list, it
will be unselected (leaving the T-list with no selected value) if its effective Required property is No
(false). But if its effective Required property is Yes (true), selecting a T-list instance’s current value will
have no effect. The value will stay selected.

229
Required (Menu Parameter) property
Description
Specifies that the end user is required to enter a value for the menu substitution parameter.
Set Form Builder
Default
No

230
Resize Allowed property
Description
Specifies that the window is to be a fixed size and cannot be resized at runtime. This property is a GUI
hint, and may not be supported on all platforms.
Applies to window
Set Form Builder
Default
No
Usage Notes
The Resize Allowed property prevents an end user from resizing the window, but it does not prevent you
from resizing the window programmatically with RESIZE_WINDOW or SET_WINDOW_PROPERTY.
Resize Allowed restrictions
• Resize Allowed is only valid when the Maximize Allowed property is set to No

231
Return Item (LOV) property
Description
See Column Mapping Properties .

232
Rotation Angle property
Description
Specifies the graphic object’s rotation angle. The angle at which the object is initially created is
considered to be 0, and this property is the number of degrees clockwise the object currently differs from
that initial angle. You can rotate an object to an absolute angle by setting this property.
Applies to graphics physical
Set Form Builder
Default 0

233
Runtime Compatibility Mode property
Description
Specifies the Form Builder version with which the current form’s runtime behavior is compatible (either
4.5 or 5.0 +). By default, new forms created with Form Builder 5.0 and later are set to 5.0-compatible.
Existing forms that are upgraded from 4.5 are 4.5-compatible. To get these forms to use the new runtime
behavior of 5.0 +, set this property to 5.0. The runtime behavior that is affected by this property is
primarily validation and initialization. For information about 5.0-and-later runtime behavior, see the
Initialization and Validation sections in the Default Processing chapter of the online Form Builder
Reference. For information about 4.5 runtime behavior, see the Form Builder 4.5 Runtime Behavior
section in the Compatibility with Prior Releases chapter of the online Form Builder Reference.
Applies to forms compatibility
Set Form Builder
Default
5.0 for new forms, 4.5 for forms created using Form Builder 4.5.

234
Savepoint Mode property
Description
Specifies whether Form Builder should issue savepoints during a session. This property is included
primarily for applications that will run against non-ORACLE data sources. For applications that will run
against ORACLE, use the default setting.
The following table describes the settings for this property:
Setting Description
Yes (the default) Specifies that Form Builder should issue a savepoint at form
startup and at the start of each Post and Commit process.
No Specifies that Form Builder is to issue no savepoints, and
that no rollbacks to savepoints are to be performed.
Refer to Built-in
Default
Yes
Savepoint Mode restrictions
When Savepoint Mode is No, Form Builder does not allow a form that has uncommitted changes to
invoke another form with the CALL_FORM procedure.

235
Savepoint_Name property
Description
Specifies the name of the savepoint Form Builder is expecting to be set or rolled back to.
Set not settable
Refer to Built-in
Usage Notes
The value of this property should be examined only within an On-Savepoint or On-Rollback trigger:
• Use Savepoint_Name in an On-Savepoint trigger to determine the savepoint to be set by a call to
ISSUE_SAVEPOINT.
• In an On-Rollback trigger, examine Savepoint_Name to determine the savepoint to which Form
Builder should roll back by way of a call to ISSUE_ROLLBACK. A NULL savepoint name implies
that a full rollback is expected.

236
Scroll Bar Alignment property
Description
Specifies whether the scroll bar is displayed at the start or the end of the frame.
Applies to frame
Set Form Builder
Default
End

237
Scroll Bar Height property
Description
Specifies the height of the scroll bar.
Applies to scroll bar
Set Form Builder

238
Scroll Bar Width property
Description
Specifies the width of the scroll bar.
Applies to scroll bar
Set Form Builder

239
Secure (Menu Parameter) property
Description
Hides characters that the end user enters for the substitution parameter.
Set Form Builder
Default
No

240
Share Library with Form property
Description
Forms that have identical libraries attached can share library package data. (For more information, see
the data_mode parameter for the CALL_FORM, OPEN_FORM, and NEW_FORM built-ins.) The Share
Library with Form property enables menus associated with the forms to share the library package data as
well.
Applies to menus
Set Form Builder
Default
Yes
Usage Notes
• If two forms share an object, and both forms are open at design time and you make changes to the
object in Form A, those changes will not be seen in Form B until the changes are first saved by
Form A, and Form B is then closed and reopened.
• If you use OPEN_FORM to open a form in a different database session, you cannot share library
data with the form or its associated menus. Attempts to share library data by setting the property to
Yes will be ignored.

241
Show Fast Forward Button property
Description
Determines whether the sound item control will display the fast forward button (both in the Layout
Editor and at runtime).
Applies to Sound item control
Refer to Built-in
Default
No
Required/Optional Required

242
Show Horizontal Scroll Bar property
Description
Determines whether a canvas, secondary window, or image item is displayed with a scroll bar.
Applies to canvas, window, editor, image item
Set Form Builder
Default
No
Show Horizontal Scroll Bar restrictions
• For a window, only valid when the Modal property is set to No.
• Valid on window managers that support horizontal scroll bars.

243
Show Lines property
Description
Determines whether a hierarchical tree displays lines leading up to each node.
Set Form Builder
Default
True

244
Show OLE Popup Menu property
Description
Determines whether the right mouse button displays a popup menu of commands for interacting with the
OLE object. The following settings are valid for this property:
YES The default OLE popup menu selection. The OLE popup menu is
displayed when the mouse cursor is on the OLE object and the right mouse
button is pressed.
NO The OLE popup menu is not displayed when mouse cursor is on the OLE
object and the right mouse button is pressed.
Refer to Built-in
Default
Yes
Usage Notes
• In addition to the Form Builder, you can programmatically set and get the OLE popup menu value
by using the SHOW_POPUPMENU property. For the SET_ITEM_PROPERTY built-in, the OLE
popup menu is shown when the SHOW_POPUPMENU property is set to PROPERTY_TRUE.
When the SHOW_POPUPMENU property is set to PROPERTY_FALSE, the OLE popup menu is
not shown. You can also use the SHOW_POPUPMENU property with the
GET_ITEM_PROPERTY built-in to obtain the current OLE popup menu setting. The
GET_ITEM_PROPERTY built-in returns TRUE when the OLE popup menu is shown, and
GET_ITEM_PROPERTY returns FALSE when the OLE popup menu is not shown.

245
Show OLE Tenant Type property
Description
Determines whether a border defining the OLE object type surrounds the OLE container. The type of
border varies according to the object type.
Set Form Builder
Default
Yes
Show OLE Tenant Type restrictions

246
Show Palette property
Description
Determines whether Form Builder will display an image-manipulation palette adjacent to the associated
image item at runtime. The palette provides three tools that enable end users to manipulate a displayed
image:
• Zoom—click the tool, then repeatedly click the image to incrementally reduce the amount of the
source image displayed within the image item's borders.
• Pan—click the tool and use the grab hand to pan unseen portions of the source image into view
(valid only if the source image extends beyond at least one border of the image item).
• Rotate—click the tool, then repeatedly click the image to rotate it clockwise in 90-degree
increments.
Refer to Built-in
Default
No

247
Show Play Button property
Description
Determines whether the sound item control will display the play button (both in the Layout Editor and at
runtime).
Refer to Built-in
Default
Yes
Usage Notes
• If you set the Show Play Button property to No when the Show Record Button property already is
set to No, Form Builder automatically will display at runtime.

248
Show Record Button property
Description
Determines whether the sound item control will display the record button (both in the Layout Editor and
at runtime).
Refer to Built-in
Default
No
Usage Notes
• If you set the Show Record Button property to No when the Show Play Button property already is
set to No, Form Builder will automatically display at runtime.

249
Show Rewind Button property
Description
Determines whether the sound item control will display the rewind button (both in the Layout Editor and
at runtime).
Refer to Built-in
Default
No

250
Show Scroll Bar property
Description
The Show Scroll Bar option specifies whether Form Builder should create a block scroll bar for the
block you are defining. When Show Scroll Bar is set to Yes, Form Builder creates the scroll bar on the
canvas specified by the Scroll Bar Canvas property.
When you create a block scroll bar, you can set the properties of the scroll bar object itself, including
Scroll Bar Canvas, Scroll Bar Orientation, Scroll Bar X Position, Scroll Bar Y Position, Scroll Bar
Width, Scroll Bar Height, Reverse Direction, and Visual Attribute Group.
Applies to block
Set Form Builder
Default:
No
Usage Notes
Setting Reverse Direction to Yes causes Form Builder to fetch the next set of records when the end user
scrolls upward. If the end user scrolls downward, Form Builder displays already fetched records.
Property Description
Scroll Bar Canvas Specifies the canvas on which the block’s scroll bar
should be displayed. The specified canvas must exist
in the form.
Scroll Bar Orientation Specifies whether the block scroll bar should be
displayed horizontally or vertically.
Scroll Bar X Position Specifies the x position of a block scroll bar measured
at the upper left corner of the scrollbar. The default
value is 0.
Scroll Bar Y Position Specifies the width of a block scroll bar measured at
the upper left corner of the scrollbar. The default
value is 0.
Scroll Bar Width Specifies the width of a block scroll bar. The default
value is 2.
Scroll Bar Height Specifies the height of a block scroll bar. The default
value is 10.
Reverse Direction Specifies that the scroll bar scrolls in reverse. The
default value is No.
Visual Attribute Group Specifies the font, color, and pattern attributes to use

251
for scroll bar. Refer to the Visual Attribute Group
property for more information. The default setting is
determined by the platform and resource file definition.

252
Show Slider property
Description
Determines whether the sound item control will display the Slider position control (both in the Layout
Editor and at runtime).
Refer to Built-in
Default
Yes

253
Show Symbols property
Description
Indicates whether a hierarchical tree should display + or - symbols in front of each branch node. The +
symbol indicates that the node has children but is not expanded. The - symbol indicates that the node is
expanded.
Set Form Builder
Default
True

254
Show Time Indicator property
Description
Determines whether the sound item control displays the time indicator (both in the Layout Editor and at
runtime).
Refer to Built-in
Default
Yes

255
Show Vertical Scroll Bar property
Description
Specifies that a vertical scroll bar is to appear on the side of a canvas or window.
Applies to canvas, window, image item, editor, item
Set Form Builder
Default
No
Show Vertical Scroll Bar restrictions
• Valid on window managers that support vertical scroll bars.
• Not valid for a root window: a root window cannot have scroll bars.
• Valid on window managers that support vertical scroll bars.
• For text item, the Multi-Line property must be YES.

256
Show Volume Control property
Description
Determines whether the sound item control will display the volume control (both in the Layout Editor
and at runtime).
Refer to Built-in
Default
Yes

257
Shrinkwrap property
Description
Specifies whether blank space should be automatically removed from the frame. When Shrinkwrap is set
to Yes, Form Builder automatically reduces, or "shrinkwraps", the frame around the items within the
frame.
Note: Reisizing a frame has no effect when Shrinkwrap is set to Yes; when you, for example, increase
the size of the frame, Form Builder automatically reduces the frame to its shrinwrap size. If you want to
resize a frame, set Shrinkwrap to No.
Applies to frame
Set Form Builder
Default
Yes

258
Single Object Alignment property
Description
Specifies the alignment for single line objects when the Frame Alignment property is set to Fill.
Applies to frame
Set Form Builder
Default
Start

259
Single Record property
Description
Specifies that the control block always should contain one record. Note that this differs from the number
of records displayed in a block.
Applies to block
Set Form Builder
Default
No
Usage Notes
• Set Single Record to Yes for a control block that contains a summary calculated item, a VBX (on
Microsoft Windows 3.x 16-bit) or ActiveX control (on 32-bit Windows). Conversely, Single
Record must be set to No for the block that contains the item whose values are being summarized
and displayed in the calculated item.
• You cannot set Single Record to Yes for a data block.

260
Size property
Description
Specifies the width and height of the canvas in the current form coordinate units specified by the
Applies to canvas
Refer to Built-in
Size (Item)
Specifies the width and height of the item in the current form coordinate units specified by the
Applies to item
Refer to Built-in
Size (Editor)
Specifies the width and height of the editor in the current form coordinate units specified by the
Applies to editor
Refer to Built-in
• EDIT_TEXTITEM
• SHOW_EDITOR
Usage Notes
• For a text item or display item, the number of characters the item can store is determined by the Max
Length property, and is not affected by the size property.

261
• In applications that will run on character mode platforms, the height of items that display text labels
must be at least 2 character cells for the text to display properly.
Size (LOV)
Specifies the width and height of the LOV in the current form coordinate units specified by the
Specifies the width and hei

oracle forms book

More Related Content

Similar to oracle forms book (20)

Recently uploaded (20)

oracle forms book