Radiographic technique of skull
- 1. RADIOGRAPHIC TECHNIQUE OF SKULL PRESENTER:- Saru Gosain B.Sc. MIT 2017 Batch MODERATOR:- RANJIT KUMAR JHA Assistant Professor
- 2. Contoso Ltd. ANATOMY OF SKULL The skull consists of the 28 bones; calvaria consists of 14 bones including 3 pair of ossicles: 1. Parietal-2 2. Temporal-2 3. Malleus-2 4. Incus-2 5. Stapes-2 6. Frontal 1 7. Occipital-1 8. Sphenoid-1 9. Ethmoid-1 Add a footer 2
- 3. Contoso Ltd. Anatomical Terminology LANDMARKS Outer canthus of the eye: the point where the upper and lower eyelids meet laterally. Infra-orbital margin/point: the inferior rim of the orbit, with the point being located at its lowest point. Nasion: the articulation between the nasal and frontal bones. Glabella: a bony prominence found on the frontal bone immediately superior to the nasion. Vertex: the highest point of the skull in the median sagittal plane (MSP). External occipital protuberance (inion): a bony prominence found on the occipital bone, usually coincident with the median sagittal plane. External auditory meatus: the opening within the ear that leads into the external auditory canal. 3
- 4. Contoso Ltd. • Inter-orbital (inter-pupillary) line: joins the centre of the two orbits or the centre of the two pupils when the eyes are looking straight forward. • Infra-orbital line: joints the two infra-orbital points. • Anthropological baseline: passes from the infra-orbital point to the upper border of the external auditory meatus (also known as the Frankfurter line). • Orbito-meatal base line (radiographic baseline): extends from the outer canthus of the eye to the centre of the external auditory meatus. This line is angled approximately 10 degrees to the anthropological baseline. • Reid’s baseline: line drawn from the inferior margin of the orbit (orbital point) to the centre of the orifice of the external auditory meatus. Add a footer 4 Lines
- 5. Contoso Ltd. ○ Median sagittal plane: divides the skull into right and left halves. ○ Coronal planes: these are at right-angles to the median sagittal plane and divide the head into anterior and posterior parts. ○ Anthropological plane: a horizontal plane containing the two anthropological baselines and the infra-orbital line. It is an example of an axial plane. ○ Auricular plane: perpendicular to the anthropological plane. Passes through the centre of the two external auditory meatuses. It is an example of a coronal plane. 5 Planes
- 6. Basic Projections o Occipito-Frontal o Lateral 6 OtherProjectionsfor cranium ○ Towne’s Projection ○ Submento-vertical ○ Sella turcica: lateral ○ Optic foramina postero-anterior oblique ○ Jugular foramina: submento-vertical 20 degrees cauded ○ Temporal bones: fronto-occipital 35 degrees cauded ○ Mastoid: lateral oblique 25 degrees cauded ○ Petrous bone: anterior oblique (Stenver’s)
- 7. Contoso Ltd. Indications ○ Different types of fractures such as basal, blowout, contre-coup, depressed, Leforte, linear, tripod) ○ Mastoiditis ○ Metastases ○ Osteomyelitis ○ Osteopetrosis ○ Osteoporosis ○ Paget’s disease ○ Polyp ○ Sinusitis ○ Tumor ○ All metal objects are removed from the patient, e.g. hair clips and hairpins. ○ Bunches of hair often produce artefacts and thus should be untied. ○ If the area of interest includes the mouth, then false teeth containing metal and metal dental bridges should be removed. ○ The patient should be provided with a clear explanation of any movements and film positions associated with the normal operation of the skull unit. 1. Cassette size: 24 x 30 cm 2. FFD: 100cm 3. kVp: 70-85 4. mAs: 20-25 5. Focal spot: small 6. Grid: yes Patientpreparation Technicalparameters
- 8. Contoso Ltd. Position of patient and cassette ○ Patient stands erect or lies prone (prone uncomfortable). ○ For the erect position, patient stands facing the vertical erect Bucky ○ MSP coincident with the midline of Bucky and perpendicular to it ○ Neck is flexed so that the orbito-meatal baseline is perpendicular to the Bucky. ○ Mid-part of frontal bone is positioned to the centre of the Bucky. Direction and centering of x-ray beam ○ Directed perpendicular to the Bucky along the MSP Essential image characteristics ○ All the cranial bones should be included within the image, including the skin margins ○ Ensure that the skull is not rotated. ○ For – Occipito- frontal: the petrous ridges should be completely superimposed within the orbit, with their upper borders coincident with the upper third of the orbit. ○ -OF 10°↓: the petrous ridges appear in the middle third of the orbit. ○ -OF 15°↓ (Caldwell method): the petrous ridges appear in the lower third of the orbit. ○ -OF 20 °↓: the petrous ridges appear just below the inferior orbital margin 8 Occipito-frontal
- 9. 9 o for the demonstration of frontal bone, OF projection is done without giving any angulation o the petrous ridges should be completely superimposed within the orbit the petrous ridges appear in the middle third of the orbit. o the petrous ridges appear just below the inferior orbital margin o for the demonstration of the superior orbital fissures, the central ray is directed through the midorbits at an angle of 20-25 degrees cauded
- 10. Contoso Ltd. Position of patient and cassette ○ Patient sits facing the erect Bucky ○ Head is rotated, such that the MSP is parallel to the Bucky and the inter- orbital line is perpendicular to it. ○ Cassette placed transversely in the erect Bucky, such that its upper border is 5 cm above the vertex of the skull. Direction and centering of the X-ray beam ○ Centre midway between the glabella and the external occipital protuberance to a point approximately 5 cm superior to the external auditory meatus. Essential image characteristics ○ The image should contain all of the cranial bones and the first cervical vertebra. Both the inner and outer skull tables should be included. ○ A true lateral will result in perfect superimposition of the lateral portions of the floors of the anterior cranial fossa and those of the posterior cranial fossa. The clinoid processes of the sella turcica should also be superimposed. 10 Lateral
- 11. Contoso Ltd. INDICATIONS: skull fractures, neoplastic processes, Paget’s diseases, chronic suppurative otitis media. Position of patient and cassette ○ Patient lies supine, with the posterior aspect of the skull resting on a grid cassette. ○ MSP right angles to the cassette and coincident with its midline. ○ The orbito-meatal base line perpendicular to the film. Direction and centering of the X-ray beam ○ Angled caudally so it makes an angle of 30 degrees to the orbito- meatal plane. ○ Centre in the midline such that the beam passes midway between the external auditory meatuses. This is to a point ○ approximately 5 cm above the glabella. ○ The top of the cassette positioned adjacent to the vertex of the skull to ensure that the beam angulation does not project the area of interest off the bottom of the image. 11 Towne’sprojection(Fronto-occipital30° cauded)
- 12. Contoso Ltd. Essential image characteristics o The sella turcica of the sphenoid bone is projected within the foramen magnum. o The image must include all of the occipital bone and the posterior parts of the parietal bone, and the lambdoidal suture should be visualized clearly. o The skull should not be rotated. This can also be assessed by ensuring that the sella turcica appears in the middle of the foramen magnum. 12 Add a footer NOTE: Reverse Towne’s projections (Hass method) can also be performed with occipito-frontal 30° cranial angulation on obese patient or who cannot be correctly adjusted for the Towne’s projection which will carry a lower radiation dose to sensitive structures than the equivalent antero-posterior projection.
- 13. Contoso Ltd. Position of patient and cassette ○ Patient erect or supine. Patients placed in the supine position may have increased intracranial pressure, therefore erect position is preferred. Erect ○ The patient sits a short distance away from a vertical Bucky. The neck is hyperextended to allow the head to fall back until the vertex of the skull makes contact with the centre of the vertical Bucky. ○ Head adjusted to bring the external auditory meatuses equidistant from the cassette. ○ The MSP at right-angles to the cassette along its midline. ○ The orbito-meatal plane should be as near as possible parallel to the cassette. Direction and centering of the X-ray beam ○ Directed right-angles to the orbito-meatal plane and centred midway between the external auditory meatuses. Essential image characteristics ○ A correct projection will show the angles of the mandible clear of the petrous portions of the temporal bone. ○ The foramina of the middle cranial fossa should be seen symmetrically either side of the midline. 13 Submento-vertical
- 14. Sella turcica: lateral INDICATIONS: To see the sella expansion by a large lesion. Position of patient and cassette • Patient sits facing the erect Bucky, head rotated, such that the MSP parallel to the Bucky and the inter-orbital line perpendicular to the Bucky. • Shoulders may be rotated slightly to allow the correct position to be attained. Patient may grip the Bucky for stability. • The head and Bucky heights are adjusted so that the centre of the Bucky is 2.5 cm vertically above a point 2.5 cm along the baseline from the external auditory meatus Direction and centering of the X-ray beam • Centred to a point 2.5 cm vertically above a point 2.5 cm along the baseline from the auditory meatus nearer the X-ray tube. 14
- 15. Contoso Ltd. OpticForamina:postero-anterior oblique(Rhesemethod) 15 INDICATIONS: detection of optic nerve glioma Position of patient and cassette • Patient lies prone or, more commonly, erect with the nose, cheek and chin of the side being examined in contact • with the Bucky or cassette table. • The centre of the orbit of the side under examination should coincide with the centre of the Bucky or cassette table. • The MSP adjusted to make an angle of 35 degrees to the vertical (55 degrees to the table). • The orbito-meatal base line is raised 35 degrees from the horizontal. Direction and centering of the X-ray beam • The horizontal central ray centred to a point 7.5 cm above and 7.5 cm behind the uppermost external auditory meatus, so that the central ray emerges from the centre of the orbit in contact with the table.
- 16. Jugular foramina: submento- vertical 20° cauded INDICATIONS: detection of glomus jugulare tumour Position of patient and cassette Patient erect or supine. If the patient is unsteady, then a supine technique is advisable. Supine • Patient’s shoulders are raised and the neck is hyperextended to bring the vertex of the skull in contact with the grid cassette or table. • Head adjusted to bring the external auditory meatuses equidistant from the cassette. • The MSP at right-angles to the cassette along its midline. • The orbito-meatal plane should be as near as possible parallel to the cassette. Direction and centering of the X-ray beam Angled caudally so that it makes an angle of 70 degrees to the orbitomeatal plane and centred in the midline to pass midway between the external auditory meatuses.
- 17. Contoso Ltd. Temporal bone: fronto-occipital35° cauded Patient lies supine or erect • Patient may be supine or erect with their back to an erect Bucky. Head adjusted to bring the external auditory meatuses equidistant from the table, so that the MSP is at right-angles to, and in the midline of, the table. • Chin is depressed so that the orbito-meatal line is at right-angles to the table. • A cassette is placed transversely and is centred to coincide with the angled central ray. Direction and centering of the X-ray beam • A caudal angulation is employed, such that it makes an angle of 35 degrees to the orbito-meatal plane. • The beam is centred midway between the external auditory meatuses. Essential image characteristics • The sella turcica of the sphenoid bone should be projected within the foramen magnum and include mastoid and petrous part of the temporal bone supra-inferiorly. • The skull should not be rotated. This can also be assessed by ensuring that the sella turcica appears in the middle of the foramen magnum.
- 18. Mastoid- lateral oblique 25° cauded Position of patient and cassette • Patient sits facing the erect Bucky. • Head is rotated, such that the MSP is parallel to the Bucky and the inter- orbital line is perpendicular to the Bucky. • The auricle of the ear adjacent to the table is folded forward to ensure that its soft-tissue outline is not superimposed over the region of interest. • Cassette positioned longitudinally in the Bucky and is centred to coincide with the central ray and mastoid process. Direction and centering of the X-ray beam • A 25-degree caudal angulation is employed and centred 5 cm above and 2.5 cm behind the external auditory meatus remote from the cassette. Essential image characteristics • Ensure that all of the mastoid air cells have been included within the image. 18 Add a footer
- 19. Mastoid-profile Position of patient and cassette • Patient lies supine on the table, with the orbito-meatal baseline perpendicular to the table top. • From a position with the MSP perpendicular to the table, the head is rotated through an angle of 35 degrees away from the side under examination, such that the MSP now makes an angle of 55 degrees to the table. • The vertical tangent to the skull should now be at the level of the middle of the mastoid process under examination, so that the mastoid process is in profile. • Finally, the head is moved transversely across the table so that the mastoid process being examined is in the midline of the table. Direction and centering of the X-ray beam • Angled caudally so that it makes an angle of 25 degrees to the orbito-meatal plane and is centred to the middle of the mastoid process on the side under examination. 19
- 20. Petrous bone: anterior oblique (Stenver’s projection) Position of patient and cassette • Patient may be prone or erect facing a vertical Bucky. • The middle of the supra-orbital margin on the side being examined is centred to the middle of the Bucky. • Neck flexed so that the nose and forehead are in contact with the table and the orbito-meatal line is perpendicular to the table. • From a position where the MSP is perpendicular to the table, the head is rotated toward the side under examination, such that the MSP is now at an angle of 45 degrees to the table. This brings the petrous part of the temporal bone parallel to the cassette. • The neck is extended so that the orbito-meatal line is raised five degrees from horizontal. • Cassette placed transversely in the Bucky and is centred at a level to coincide with the central ray. 20
- 21. Contoso Ltd. Direction and centering of the X-ray beam • A 12-degree cephalad beam angulation is employed, i.e. at an angle of seven degrees to the orbito-meatal plane, to separate the occiput from the petrous bone. • Centre midway between the external occipital protuberance and the external auditory meatus furthest from the cassette. 21
- 22. Styloid process: PA axial ( Cahoon method) o The styloid process is a needle like projection of varying lengths averaging 2-3 cm which projects from the inferior part of the petrous temporal bone. 22 Add a footer Position of patient and cassette • Patient in the seated-upright or prone position. • Adjust the forehead and nose so that the MSP is perpendicular to the midline o f the Bucky. • Center the IR to the nasion. • Adjust the flexion of the patient's neck so that the OML is perpendicular to the plane of the IR. Direction and centering of x-ray beam • Directed to the nasion at an angle of 25 degrees cephalad. Essential image characteristics • Temporal styloid processes free of superimposition from frontal bone, occipital bone, and coronoid processes of the mandible. • Styloid processes projected within or just above the maxillary sinuses.
- 23. Facialbones and sinuses Facial skeleton consists of 14 bones. 1. Maxilla-2 2. Zygomatic-2 3. Nasal-2 4. Lacrimal-2 5. Palatine-2 6. Inferior nasal concha-2 7. Mandible-1 8. Vomer -1 Within these bones, there are series of air-filled cavities known as the paranasal sinuses. There are 4 paranasal sinuses; 1. Maxillary sinuses 2. Frontal sinuses 3. Sphenoid sinuses 4. Ethmoid sinuses 23 Add a footer
- 24. Contoso Ltd. 1. Occipito-mental 2. Occipito-mental 30° cauded 3. Lateral 4. Zygomatic arches: infero-superior 5. Orbits: occipito-mental (modified) 6. Nasal bones: lateral 7. Mandible: lateral 30° cephalad : postero-anterior : postero-anterior oblique 8. Temporal-mandibular joints: lateral 25° cauded 24 Add a footer Projectionsfor paranasalsinuses 1. Occipito-mental with open mouth (Water’s view) 2. Occipito-frontal 15° cauded 3. Lateral Projectionsfor facial bones
- 25. Contoso Ltd. Occipito-mental for facial bones 25 Position of patient and cassette • Patient seated facing the vertical erect Bucky. • Patient’s nose and chin are placed in contact with the midline of the cassette holder. The head is then adjusted so that the orbito- meatal baseline makes 45-degree angle to the cassette holder. • The horizontal central line of the Bucky/cassette holder should be at the level of the lower orbital margins. • Ensure that the MSP is at right-angles to the Bucky/cassette holder by checking the outer canthi of the eyes and that the external auditory meatuses are equidistant. Direction and centering of the X-ray beam • Perpendicular and centred to the middle of the cassette holder. • To check that the beam is centred properly, the cross-lines on the Bucky or cassette holder should coincide with the patient’s anterior nasal spine.
- 26. Essential image characteristics • The petrous ridges must appear below the floors of the maxillary sinuses. • There should be no rotation. This can be checked by ensuring that the distance from the lateral orbital wall to the outer skull margins is equidistant on both sides. 26 Add a footer
- 27. Contoso Ltd. Position of patient and cassette ○ Patient seated facing the vertical Bucky. ○ The patient’s nose and chin are placed in contact with the midline of the cassette holder. The head then is adjusted to bring the orbito-meatal baseline to a 45-degree angle to the cassette holder. ○ The horizontal central line of the Bucky or cassette holder should be at the level of the symphysis menti. ○ Ensure that the MSP is at right-angles to the Bucky by checking that the outer canthi of the eyes and the external auditory meatuses are equidistant. Direction and centering of the X-ray beam ○ The tube is angled 30 degrees caudally and centred along the midline, such that the central ray exits at the level of the lower orbital margins. ○ To check that the beam is centred properly, the cross-lines on the Bucky or cassette holder should coincide approximately with the upper symphysis menti region. 27 Occipito-mental 30° cauded
- 28. Contoso Ltd. Essential image characteristics o The floors of the orbit will be clearly visible through the maxillary sinuses, and the lower orbital margin should be demonstrated clearly. o There should be no rotation. This can be checked by ensuring that the distance from the lateral orbital wall to the outer skull margins is equidistant on both sides. 28 Add a footer
- 29. Contoso Ltd. Position of patient and cassette: In cases of injury, this projection should be taken using a horizontal beam in order to demonstrate any fluid levels in the paranasal sinuses. Erect ○ Patient sits facing the vertical Bucky. The head is rotated, such that the side under examination is in contact with the Bucky or cassette holder. ○ The Bucky height is altered, such that its centre is 2.5 cm inferior to the outer canthus of the eye. ○ The MSP is brought parallel to the cassette by ensuring that the inter-orbital line is at right angles to the cassette and the nasion and external occipital protuberance are equidistant from it. Direction and centering of the X-ray beam ○ Centre the horizontal central ray to a point 2.5 cm inferior to the outer canthus of the eye. Essential image characteristics ○ The image should contain all of the facial bones sinuses, including the frontal sinus and posteriorly to the anterior border of the cervical spine. ○ A true lateral will have been obtained if the lateral portions of the floor of the anterior cranial fossa are superimposed. 29 Lateral for facial bones
- 30. Contoso Ltd. Zygomatic arches: infero-superior (jug- handle projection) Position of patient and cassette INDICATION: Fracture of the zygomatic bones. This projection is essentially a modified submento-vertical (SMV) projection. This method is tangential projection. o Patient lies supine, with one or two pillows under the shoulders to allow the neck to be extended fully. o Cassette is placed against the vertex of the skull, such that its long axis is parallel with the axial plane of the body. It should be supported in this position with foam pads and sandbags. o The flexion of the neck is now adjusted to bring the long axis of the zygomatic arch parallel to the cassette. o The head in now tilted five to ten degrees away from the side under examination. This allows the zygomatic arch under examination to be projected on to the film without superimposition of the skull vault or facial bones. 30
- 31. Contoso Ltd. Direction and centering of the X-ray beam ○ Perpendicular to the cassette and long axis of the zygomatic arch. ○ A centering point should be located such that the central ray passes through the space between the midpoint of the zygomatic arch and the lateral border of the facial bones. Essential image characteristics ○ The whole length of the zygomatic arch should be demonstrated clear of the skull. If this has not been achieved, then it may be necessary to repeat the examination and alter the degree of head tilt to try and bring the zygomatic arch clear of the skull. 31 Add a footer
- 32. Contoso Ltd. Position of patient and cassette ○ Patient seated facing the vertical Bucky or cassette holder. ○ The patient’s nose and chin are placed in contact with the midline of the cassette holder. The head is then adjusted to bring the orbito-meatal baseline to a 35-degree angle to the cassette holder. ○ The horizontal central line of the vertical Bucky or cassette holder should be at the level of the midpoint of the orbits. ○ Ensure that the MSP is at right-angles to the Bucky or cassette holder by checking that the outer canthi of the eyes and the external auditory meatuses are equidistant. Direction and centering of the X-ray beam ○ Perpendicular to the cassette holder or Bucky and by design will be centred to the middle of the image receptor. If this is the case and the above positioning is performed accurately, then the beam will already be centred. ○ To check that the beam is centred properly, the cross-lines on the Bucky or cassette holder should coincide with the midline at the level of the mid-orbital region. 32 Orbits: occipito-mental(modified)
- 33. Contoso Ltd. Essential image characteristics o The orbits should be roughly circular in appearance (they will be more oval in the occipito-mental projection). o The petrous ridges should appear in the lower third of the maxillary sinuses. o There should be no rotation. This can be checked by ensuring that the distance from the lateral orbital wall to the outer skull margins is equidistant on both sides. 33 Add a footer
- 34. Contoso Ltd. Nasal bones: lateral 34 Position of patient and cassette ○ Patient sits facing the cassette stand or a vertical Bucky. ○ The head is turned so that MSP is parallel with the cassette and the inter-pupillary line is perpendicular to the cassette. ○ The nose should be roughly coincident with the centre of the cassette. Direction and centering of the X-ray beam ○ A horizontal central ray is directed through the centre of the nasal bones and collimated to include the nose.
- 35. Contoso Ltd. Position of patient and cassette ○ Patient lies in the supine position. The trunk is rotated slightly and then supported with pads to allow the side of the face being examined to come into contact with the cassette, which will be lying on the tabletop. ○ The MSP should be parallel with the cassette and the inter-pupillary line perpendicular. ○ The neck may be flexed slightly to clear the mandible from the spine. ○ The long axis of the cassette should be parallel with the long axis of the mandible and the lower border positioned 2 cm below the lower border of the mandible. 35 Mandible: lateral 30° cephalad
- 36. Contoso Ltd. Direction and centering of the X-ray beam ○ The central ray is angled 30 degrees cranially at an angle of 60 degrees to the cassette and is centred 5 cm inferior to the angle of the mandible remote from the cassette. ○ Collimate to include the whole of the mandible and temporo- mandibular joint (TMJ) (include the external auditory meatus (EAM) at the edge of the collimation field). Essential image characteristics ○ The body and ramus of each side of the mandible should not be superimposed. ○ The image should include the whole of the mandible, from the TMJ to the symphysis menti. 36 Add a footer
- 37. Contoso Ltd. Position of patient and cassette ○ Patient sits facing the vertical Bucky. ○ MSP should be coincident with the midline of the Bucky or cassette holder. The head is then adjusted to bring the orbito-meatal baseline perpendicular to the Bucky or cassette holder. ○ The MSP should be perpendicular to the cassette. Check that the external auditory meatuses are equidistant from the cassette. ○ The cassette should be positioned such that the middle of the cassette, when placed longitudinally in the Bucky or cassette holder, is centred at the level of the angles of the mandible. Direction and centering of the X-ray beam ○ Directed perpendicular to the cassette and centred in the midline at the levels of the angles of the mandible. Essential image characteristics ○ The whole of the mandible from the lower portions of the TMJs to the symphysis menti should be included in the image. ○ There should be no rotation evident. 37 Mandible: postero-anterior
- 38. Contoso Ltd. Position of patient and cassette ○ Patient sits facing the vertical erect Bucky. ○ MSP should be coincident with the midline of the Bucky or cassette holder. The head is then adjusted to bring the orbito-meatal baseline perpendicular to the Bucky or cassette holder. ○ From a position with the MSP perpendicular to the cassette, the head is rotated 20 degrees to either side, so that the cervical vertebra will be projected clear of the symphysis menti. ○ The head is now repositioned so the region of the symphysis menti is coincident with the middle of the cassette. ○ The cassette should be positioned such that the middle of an 18 24-cm cassette, when placed longitudinally in the Bucky or cassette holder, is centred at the level of the angles of the mandible. 38 Mandible: postero-anterioroblique
- 39. Contoso Ltd. 39 Add a footer Direction and centering of the X-ray beam ○ Directed perpendicular to the cassette and centred 5 cm from the midline, away from the side being examined, at the level of the angles of the mandible. Essential image characteristics ○ The symphysis menti should demonstrated without any superimposition of the cervical vertebra.
- 40. Contoso Ltd. Position of patient and cassette ○ Patient sits facing the vertical Bucky or lies prone on the Bucky table. The head is rotated to bring the side of the head under examination in contact with the table. ○ The head and Bucky or cassette holder level is adjusted so the centre cross-lines are positioned to coincide with a point 1 cm along the orbito-meatal baseline anterior to the external auditory meatus. ○ The MSP is brought parallel to the cassette by ensuring that the inter- pupillary line is at right-angles to the table top and the nasion and external occipital protuberance are equidistant from it. Direction and centering of the X-ray beam ○ Angled 25 degrees caudally and will be centred to a point 5 cm superior to the joint remote from the cassette so the central ray passes through the joint nearer the cassette. Essential image characteristics ○ Condyle lying in mandibular fossa in the closed-mouth examination ○ Condyle lying inferior to articular tubercle in the open-mouth examination if the patient is normal and able to open the mouth wide 40 Temporal-mandibularjoints:lateral 25° cauded(Schuller method)
- 41. Contoso Ltd. 41 Position of patient and cassette ○ Patient seated facing the vertical Bucky. ○ The patient’s nose and chin are placed in contact with the midline of the cassette holder. The head is then adjusted to bring the orbito-meatal baseline to a 45-degree angle to the cassette holder. ○ The horizontal central line of the Bucky or cassette holder should be at the level of the lower orbital margins. ○ Ensure that the MSP is at right-angles to the Bucky or cassette holder by checking that the outer canthi of the eyes and the external auditory meatuses are equidistant. ○ The patient should open the mouth as wide as possible before exposure. This will allow the posterior part of the sphenoid sinuses to be projected through the mouth. Paranasal sinuses occipito- mental (Water’s view)
- 42. Contoso Ltd. Direction and centering of the X-ray beam ○ Perpendicular to the cassette holder or Bucky and by design will be centred to the middle of the image receptor. If this is the case and the above positioning is performed accurately, then the beam will already be centred. ○ To check the beam is centred properly, the cross-lines on the Bucky or cassette holder should coincide with the patient’s anterior nasal spine. ○ Collimate to include all of the sinuses. Essential image characteristics ○ The petrous ridges must appear below the floors of the maxillary sinuses. ○ There should be no rotation. This can be checked by ensuring that the distance from the lateral orbital wall to the outer skull margins is equidistant on both sides. NOTES: This projection is designed to project the petrous part of the temporal bone below the floor of the maxillary sinuses so that fluid levels and pathological changes in the lower part of the sinuses can be visualized clearly. -To distinguish a fluid level from mucosal thickening, an additional projections may be undertaken with the head tilted, such that a transverse plane makes an angle of about 20 degrees to the floor. 42 Add a footer
- 43. Contoso Ltd. This projection is used to demonstrate the frontal and ethmoid sinuses Position of patient and cassette ○ Patient seated facing the vertical Bucky or skull unit cassette holder so the MSP is coincident with the midline of the Bucky and is also perpendicular to it. ○ The head is positioned so that the orbito-meatal baseline is raised 15 degrees to the horizontal. ○ Ensure that the nasion is positioned in the centre of the Bucky. Direction and centering of the X-ray beam ○ Directed perpendicular to the vertical Bucky along the MSP so the beam exits at the nasion. ○ A collimation field or extension cone should be set to include the ethmoidal and frontal sinuses. 43 Occipito-frontal15°cauded (Caldwell Method)
- 44. Essential image characteristics o All the relevant sinuses should be included within the image. o The petrous ridges should be projected just above the lower orbital margin. o It is important to ensure that the skull is not rotated. This can be assessed by measuring the distance from a point in the midline of the skull to the lateral orbital margins. If this is the same on both sides of the skull, then it is not rotated. Add a footer 44
- 45. Contoso Ltd. Position of patient and cassette ○ Patient sits facing the vertical Bucky or skull unit cassette holder. The head is then rotated, such that the MSP is parallel to the Bucky and the inter- orbital line is perpendicular to the Bucky. ○ The head and Bucky heights are adjusted so that the centre of the Bucky is 2.5 cm along the orbito-meatal line from the outer canthus of the eye. ○ A cassette is positioned longitudinally in the erect Bucky, such that its lower border is 2.5 cm below the level of the upper teeth. Direction and centering of the X-ray beam ○ A horizontal central ray should be employed to demonstrate fluid levels. ○ The tube should have been centred previously to the Bucky, such that the central ray will now be centred to a point 2.5cm posterior to the outer canthus of the eye. Essential image characteristics ○ A true lateral will have been achieved if the lateral portions of the floors of the anterior cranial fossa are superimposed. 45 Add a footer Paranasal sinus: lateral
- 46. Contoso Ltd.