SNS Regular set
5 likes30,846 views
This document provides the steps for applying a SNS regular set of gel nails. It lists the necessary items which include gel base, sealer dry, gel top, and vitamin oil. The preparation steps instruct to sanitize hands with alcohol. Then the document outlines the 10 steps for applying the dipping powder to nails including applying glue, shaping, filing, applying base coat, dipping in powder, and repeating for all nails. The finishing steps describe sealing, applying thin coats of top coat, and applying vitamin oil to complete the manicure.
SNS Regular set
- 1. SNS Regular Set Items Needed Natural Set, E.A. Bond, Gel Base, Sealer Dry, Gel Top, Vitamin Oil, Brush on Glue Preparation Steps Always sanitize your customers hands with 100% Alcohol, as well as your own hands, before preforming any service.
- 2. Step 1 Tip Application on 10 nails with Brush on Glue with Calcium. Step 2 Shape on the side of the nails to even.
- 3. Step 3 Sand the entire nail with fine 180 file, or drill machine with fine paper sander on slow speed (#1 speed). Step 4 Apply E.A. Bond on 10 nails and dry well with a paper towel.(On real nail only)
- 4. Notice: 1. Always bend the finger 90 degrees before tapping the finger 2. When applying Gel Base, apply the brush laying flat and go from left to right (long strokes), then from right go evenly back to left (before any dipping)
- 5. Dipping Powder Steps Step 1 On the First Finger, apply Gel Base across the part of the nail bed that attached to the nail tip. Dip into the Natural Set and then tap the excess (After bending the finger 90 degrees). Step 2 Apply Gel Base to 1/2 of the nail bed, then dip it in the Natural Set. Tap the excess.
- 6. Step 3 Apply Gel Base to 3/4 of the nail bed, and then dip it into the Natural Set and tap the finger. Step 4 Apply Gel Base to the entire nail bed (three Step 5 Repeat steps 1 through 4 for all 10 nails.
- 7. Finishing Steps Step 1 Shape all 10 nails* (may use the nail machine with fine paper sander around the cuticle and use with slow speed, in case the nail plate is waving). Step 2 Buff all 10 nails and wash the hands.
- 8. Step 3 Apply Sealer Dry to all 10 nails, and then wipe them off with a paper towel. Step 4 Apply the first coat of Gel Top quickly and as thin as possible for five nails, and then reapply the second coat in the same way. Step 5 Wait for 1 to 2 minutes. Apply Vitamin Oil and massage the hands to finish.
- 9. Notice: 1. Apply Gel Top, quick and very thin or it may cause nail to not dry and the brush get hard. 2. After each client, always sanitize your brush with 100% alcohol and dry well.
- 10. SNS Regular Set Techniques were designed by SNS Company & Copy Right.