Samsung ARTIK Cloud and Genuino MKR100
Download as PPTX, PDF0 likes325 views
The document outlines how to build a sensing system using a Genuino MKR1000 and Artik Cloud as part of the IoT challenge. It provides links to necessary tutorials, materials like the TMP36 temperature sensor, and steps for registration, creating device types, and manifest activation. Example data formats for temperature readings and device information are also included.
Samsung ARTIK Cloud and Genuino MKR100
- 1. Building a Sensing System using a Genuino MKR1000 and ARTIK Cloud Massimo Banzi
- 2. ARTIK Cloud for IoT Challenge Here’s how to get started to join the Challenge! https://www.hackster.io/contests/artikcloud The code used here is based on information I gathered from these tutorials: https://www.hackster.io/makers-ns/arduino-mkr1000-dht-artik-cloud-78cf18 https://www.artik.io/blog/2016/05/monitor-fire-temperature-using-artik-cloud-open-source-iot-hardware-android/
- 3. Register on ARTIK Cloud https://developer.artik.cloud/account/signup
- 7. Materials
- 9. TMP36 Temperature sensor The TMP35/TMP36/TMP37 are low voltage, precision centigrade temperature sensors. They provide a voltage output that is linearly proportional to the Celsius (centigrade) temperature. The TMP35/TMP36/TMP37 do not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range.
- 12. http://bit.ly/simpletmp36 Simple code example for the TMP36
- 13. https://developer.artik.cloud/dashboard/devicetypes Create a device type in ARTIK Cloud
- 14. https://developer.artik.cloud/dashboard/devicetypes Create a manifest for the device
- 15. Create a manifest for the device
- 17. Connect a device using the manifest cc.arduino.tempandfire
- 18. Connect a device using the manifest cc.arduino.tempandfire
- 19. Device info, you’ll need the Device ID and Device Token