SAP FICO_end user manual.pdf

FI- CO End User Training Module
2008
Gr e a v e s Co t t o n Li m i t e d Page 1
2009
FICOTEAM
GCL
PETL
SAP FI-CO TRAINING MANUAL

2009

2009
l Rights Reserved
Strictly for Internal Circulation for Greaves Cotton Limited & Premium Energy & Transmissions Limited
(FICO Team only)
Every effort has been made to avoid errors or omissions in this User Manual. In Spite of this errors may creep in. Any
Mistakes, errors or discrepancy noted may be brought to our notice which shall be taken care in the next version.
No part of the this book may be reproduced or copied in any form or by any means (Graphic, electronic or mechanical,
including photocopying) or reproduced with the written permission from Greaves Cotton Limited. Breach of this condition
is liable for legal action.
All the Logos used in this Manual are owned by the respective Principles
Version 1.0 Release 1.2009
Prepared By FICO Team GCL & PETL
Mumbai

2009
Table of Contents:
CHAPTER 1 ...................................................................................................................................................1
GLOSSARY ..............................................................................................................................................................1
Features..........................................................................................................................................................1
Company ........................................................................................................................................................1
Company Code ...............................................................................................................................................1
Chart of Accounts...........................................................................................................................................1
Account Groups ..............................................................................................................................................1
Parallel Accounting.........................................................................................................................................2
Integration of Legal and Management Reporting ........................................................................................ 2
Segment Reporting....................................................................................................................................... 2
Controlling area..............................................................................................................................................2
Fiscal Year.......................................................................................................................................................2
Special Periods................................................................................................................................................3
Cost Centre.....................................................................................................................................................3
Profit Centre ...................................................................................................................................................3
Profit Center Group ........................................................................................................................................6
Cost Centre.....................................................................................................................................................7
Cost Centre Group ..........................................................................................................................................9
Posting Keys .................................................................................................................................................10
Document Type ............................................................................................................................................12
CHAPTER 2 .................................................................................................................................................15
MASTERS...........................................................................................................................................................15
General Ledger Account Codes.....................................................................................................................15
Creation of Account Codes (FS00) ................................................................................................................16
Extending GL accounts (FS15) ......................................................................................................................18
Creation of Primary Cost Element (KA01).....................................................................................................18
Maintaining Cost and Activity Type(KP26)...................................................................................................20
Allocation Cost Element ...............................................................................................................................22
Creation of Secondary Cost Element (KA06).................................................................................................22
Creation of Vendor Master Codes (FK01).....................................................................................................23
Creation of Customer Master Codes (FD01).................................................................................................28
Creation of Internal Order Master (KO01)....................................................................................................34
Creation of Asset Master Codes (AS01)........................................................................................................36
Creation of Asset Sub-number Codes (AS11)................................................................................................39
Display of Asset Master Codes (AW01N)......................................................................................................40
Creation of Bank Key Masters (FI01)............................................................................................................42
Creation of House bank (FI12)......................................................................................................................42
Maintaining Cheque Lots for Each Banks (FCHI) ..........................................................................................47
CHAPTER -3................................................................................................................................................49
TRANSACTIONS .....................................................................................................................................................49
Booking a Journal Voucher (F-02)/ (FB50)....................................................................................................49
Display of Journal Voucher (FB03)................................................................................................................52
Booking Accrual/Deferral Document (FBS1) ................................................................................................53
Reverse Accrual/Deferral Document (F.81)..................................................................................................55

2009
Individual Reversal (FB08)............................................................................................................................56
Creation of sample document (F-01)............................................................................................................56
Display Sample Document (FBM3)...............................................................................................................57
Passing the Entry Using Sample Document (FB50) ......................................................................................58
Booking of Recurring Entries (FBD1) ............................................................................................................60
Posting of Recurring Entries (F.14)...............................................................................................................63
CHAPTER 4...............................................................................................................................................66
ACCOUNTS PAYABLE ..............................................................................................................................................66
Vendor Invoice Posting (FB60) / (F-43).........................................................................................................66
Vendor Credit Memo Posting (FB65)/ (F-41)...............................................................................................68
Vendor Invoice Payment ( F-53) / (F-58).......................................................................................................69
Advance Payments to Vendors (F-48) ..........................................................................................................72
Clearing the Down Payment (F-54) ..............................................................................................................74
Memorandum Entries / Noted Items (F-57) .................................................................................................77
IMPORT PROCESS...................................................................................................................................................77
CHAPTER 5...............................................................................................................................................89
ACCOUNTS RECEIVABLE ..........................................................................................................................................89
Customer Invoice (FB70)...............................................................................................................................89
Booking Customer Invoices (F-22)................................................................................................................90
Customer Collection (F-28)...........................................................................................................................91
Printing Pay in Slips (ZPAYSLIP) ....................................................................................................................93
Clearing Open Line Items in the GL account (F-03) ......................................................................................93
Customer advance (F-29) .............................................................................................................................94
Clearing Advance (F-39) ...............................................................................................................................95
Refund of Advance to Customer (F-31)/(F-18) .............................................................................................97
Clear Customer Invoice with Advances ( F-32) .............................................................................................98
FOREIGN EXCHANGE REVALUATION / RESTATEMENT....................................................................................102
Maintain The Foreign Exchange Rate (OB08) ............................................................................................102
Realised Gain Loss......................................................................................................................................103
Unrealized Gain Or Loss .............................................................................................................................104
Revaluation / Restatement of General Ledger A/c....................................................................................108
BILL OF EXCHANGE..........................................................................................................................................108
Posting Procedure for Bills of Exchange Receivable .........................................................................108
Acceptance of Bills Of Exchange (F-36) ......................................................................................................109
Bill Discounting (F-33) ................................................................................................................................113
Reverse Contingent Liability (F-20).............................................................................................................115
Memorandum Entries (Noted Items - (F-49)).............................................................................................118
Reversal of Noted Entries (FB08)................................................................................................................122
CHAPTER 6............................................................................................................................................. 123
BANK & CASH TRANSACTION..........................................................................................................................123
Display cheque register (FCHN)..................................................................................................................123
Printing Cheque (FBZ5)...............................................................................................................................124
Manual issue of cheque (FCH5)..................................................................................................................126
Deleting Cheque Number (FCHF)................................................................................................................127

2009
Voiding Cheques (FCH9/ FCH3) ..................................................................................................................127
Voiding Cheque With Reversal Document (FCH8) ......................................................................................129
Resetting Of Cleared Document (FBRA) .....................................................................................................129
Reprinting of Cheques-FCH7.......................................................................................................................131
Automatic Payment Program- (F110) ........................................................................................................131
Cash Journal (FBCJ).....................................................................................................................................141
Splitting of Cash Journal Entries.................................................................................................................... 143
Cash Payment to Vendors/ Customers ......................................................................................................... 145
Reversal of Cash Journal ............................................................................................................................... 147
BANK RECONCILIATION .........................................................................................................................................148
MANUAL BANK RECONCILIATION PROCESS (FF67).....................................................................................................148
Integration..................................................................................................................................................148
Procedure ...................................................................................................................................................148
View and rectify any errors in the Bank Statement (FEBAN)......................................................................150
Uploading Manual Bank Statement through Excel ( ZFF67) ......................................................................153
Automatic Bank Reconciliation(FF.5) .........................................................................................................153
Entry Flow for CMS Collections...................................................................................................................154
CHAPTER 7............................................................................................................................................. 156
FIXED ASSETS..............................................................................................................................................156
Creation of material master (MM01).........................................................................................................156
Extension of Vendor Master ( XK01)...........................................................................................................159
Creation of internal order (KO01)...............................................................................................................161
Budgeting Internal order (KO22)................................................................................................................163
Creation of purchase order (ME21N) .........................................................................................................164
Release Purchase order( ME29N)...............................................................................................................166
Goods Receipt ( MIGO )..............................................................................................................................167
Invoice verification (MIRO).........................................................................................................................170
Settlement of internal order (KO88)...........................................................................................................172
Creation of asset master (AS01).................................................................................................................173
Settlement of CWIP to Main asset.(KO02) .................................................................................................176
Final settlement of CWIP to Main asset (KO88) .........................................................................................177
Depreciation Run ( AFAB) ...........................................................................................................................179
Asset sale with Customer F-92.................................................................................................................183
Asset sale without Customer - ABAON.......................................................................................................185
Sales of Assets ............................................................................................................................................187
Assets Scrapping ( ABAVN).........................................................................................................................187
Asset transfer (ABUMN).............................................................................................................................187
Asset Revaluation (ABAW) .........................................................................................................................189
Impairment of Asset (ABAA).......................................................................................................................191
CHAPTER 8............................................................................................................................................. 194
COUNTRY INDIA VERSION...............................................................................................................................194
Withholding Tax .........................................................................................................................................194
Create Remittance Challan (J1INCHLN)......................................................................................................199
Enter Bank Challan Updation (J1INBANK)..................................................................................................203
Certificate print ( J1INCERT) .......................................................................................................................204
Reprint TDS Certificate (J1INCCREP)...........................................................................................................206

2009
Quarterly Return (J1INQEFILE) ...................................................................................................................206
TDS for Concessional Rate of Tax ...............................................................................................................207
S
ERVICE TAX.......................................................................................................................................................209
Creation of Tax code (FTXP) .......................................................................................................................209
S
ERVICE TAX PROCESS...........................................................................................................................................218
EXCISE DUTY.......................................................................................................................................................224
Maintaining of Excise Master Data (J1ID)..................................................................................................225
Excise JV (J1IH) ...........................................................................................................................................226
Making Adjustment Postings for Scrap (Material Write-off) .....................................................................226
Making Adjustment Postings for Materials Not Used in Production..........................................................230
Making Adjustment Postings for Additional Excise Paid by Vendors.........................................................231
Making Adjustment Postings for Money Transferred to PLA .....................................................................233
Making Adjustment Postings for Other Transactions ................................................................................234
CENVAT Register (J2I9)...............................................................................................................................235
Excise Register Extraction (J2I5).................................................................................................................239
Print Excise Register (J2I6)..........................................................................................................................239
Monthly Utilisation of Cenvat Credit and Payment from PLA (J2IUN)........................................................241
Click on the Execute Button........................................................................................................................242
CAPITAL GOODS EXCISE ........................................................................................................................................243
Sale of Capital Goods in the Year of Purchase............................................................................................243
For Claiming Balance 50% Cenvat Credit on Assets in the Next Accounting Year......................................244
ER 1 Register (J2IER1).................................................................................................................................244
OUTPUT FORMAT FOR THE ER 1REGISTER................................................................................................................245
S
ALES TAX..........................................................................................................................................................249
Form Tracking.............................................................................................................................................249
CHAPTER 9............................................................................................................................................. 250
PURCHASE ORDER ...............................................................................................................................................250
Material Management (MM) Integration..................................................................................................250
Material Creation Display( MM03)..........................................................................................................250
Purchase Order: GR IR: Goods Receipt Invoice Receipt.........................................................................254
Invoice verification(MIRO)........................................................................................................................260
Reversal of MIRO (MR8M)..........................................................................................................................263
Release Blocked Invoices (MRBR)...............................................................................................................265
CHAPTER 10........................................................................................................................................... 269
S
ALES & DISTRIBUTION.........................................................................................................................................269
Process........................................................................................................................................................269
For Comparison of Master Data from Sales & Distribution to Finance Accounting (OV50).......................269
Display Sales Order ( FV03) ........................................................................................................................270
Display the billing document (VF03)...........................................................................................................271
Creation of excise invoice (J1IIN)................................................................................................................272
Customer Analysis (FD11)...........................................................................................................................274
CHAPTER 11........................................................................................................................................... 276
REVERSALS & EDITING DOCUMENTS........................................................................................................................276
Reset and Reversal of Documents (FBRA) ..................................................................................................276
Transfer Posting with Clearing (F-04).........................................................................................................277

2009
CHAPTER 12........................................................................................................................................... 280
REPORTS & BALANCES..........................................................................................................................................280
FINANCIAL STATEMENT VERSION...................................................................................................................280
Designing of Balance Sheet........................................................................................................................281
Designing of Profit & Loss..........................................................................................................................282
Assigning of Accounts to FSV......................................................................................................................284
General Ledger ...........................................................................................................................................285
Accounts Receivable...................................................................................................................................286
Accounts Payable .......................................................................................................................................287
Fixed Assets ................................................................................................................................................287
Bank & Cash ...............................................................................................................................................289
Travel Management...................................................................................................................................290
CHAPTER 13........................................................................................................................................... 291
DUNNING PROCESS..............................................................................................................................................291
Correspondence (FB12 & F.64) ..................................................................................................................291
Interest Calculation on MSMED .................................................................................................................295
Calculate Interest on Arrears without Postings (F.4C)................................................................................295
Interest Rate Maintaining (OB83) ..............................................................................................................298
CHAPTER -14 ............................................................................................................................................ 301
CONTROLLING & COSTING....................................................................................................................................301
Display BOM ( CS03)/ Multilevel BOM ( CS11) ...........................................................................................301
Display Routing ( CA03)..............................................................................................................................302
View cost of Final Product ( CK11N) ...........................................................................................................302
Display Production Order ( CS03) ...............................................................................................................303
Production Order Confirmation ( CO11N) ..................................................................................................304
View Material Document (MB03)...............................................................................................................305
To Get Actual Cost of Production Order Settlement (KO88).......................................................................305
Overheads Assessment Cycle (KSU5)..........................................................................................................306
Executing Assessment Cycle .......................................................................................................................309
Month end process WIP Calculation ( KKAO) ..........................................................................................311
Settlement of orders which are in WIP (CO88/KO88).................................................................................314
Changing the Cut-off Period(KKA0 .............................................................................................................315
CHAPTER -15 ............................................................................................................................................ 317
MONTH END ACTIVITIES .......................................................................................................................................317
CHAPTER -16 ............................................................................................................................................ 320
YEAR END ACTIVITIES...........................................................................................................................................320
Fiscal Year Change : Asset Accounting (AJRW)...........................................................................................320
Capital WIP CLOSING (AJAB) ......................................................................................................................321
Customer Vendor Balance Carry forward (F.07).........................................................................................322
Year-End Close : General Ledger (FAGLGVTR)............................................................................................323
CHAPTER -17 ............................................................................................................................................ 326
PLANNING..........................................................................................................................................................326
Planning At profit centre level (GP12N) .....................................................................................................326

2009
Uploading Plan Data from Excel Sheet (GLPLUP).......................................................................................329
CHAPTER -18 ............................................................................................................................................ 332
TRAVEL MANAGEMENT.........................................................................................................................................332
Overall Process of Travel Management .....................................................................................................332
Process Flow...............................................................................................................................................332
Travel Request............................................................................................................................................332
Travel Planning...........................................................................................................................................333
Travel Expense Report................................................................................................................................333
Creating a Travel Request ..........................................................................................................................334
S
ENDING A TRAVEL REQUEST .......................................................................................................................335
Use..............................................................................................................................................................335
Procedure ...................................................................................................................................................335
Result..........................................................................................................................................................335
Approving a Travel Request........................................................................................................................335
Mass approval............................................................................................................................................336
CHAPTER -19 ............................................................................................................................................ 337
INVESTMENT ACCOUNTING....................................................................................................................................337
Create Mutual Fund Master(AS01).............................................................................................................337
Investment procurement(F-90) ..................................................................................................................337
Sale of Investments ....................................................................................................................................339
CHAPTER-20............................................................................................................................................. 341
TIPS & TRICKS FOR EFFECTIVE USAGE OF SAP............................................................................................................341
Copy & Paste Data of SAP Screen...............................................................................................................341
Table Settings.............................................................................................................................................341
Creating your Own Favourite menu ...........................................................................................................342
Reduction of Repetitive work .....................................................................................................................343
Changing Layout of a Report.....................................................................................................................344
Setting up the Printer for Each User ID.......................................................................................................345
Sending Mail from the SAP System ............................................................................................................346
CHAPTER-21............................................................................................................................................. 350
S
OLUTION MANAGER ...........................................................................................................................................350
Logging a problem while working with SAP...............................................................................................350
Viewing the Issue Logs / Status /Solution / Confirmations.........................................................................351
Escalating the Problem higher Level/ Changing the Status........................................................................355
Reports / Referring to Old Solutions...........................................................................................................357
Personalising the F4 Values........................................................................................................................359

2008
CHAPTER 1
Glossary
Features
The Financial Accounting application component comprises the following sub-components:
General Ledger (FI-GL)
Accounts Payable (FI-AP)
Accounts Receivable (FI-AR)
Bank Accounting (FI-BL)
Asset Accounting (FI-AA)
Travel Management (FI-TV)
Company
The smallest organizational unit for which individual financial statements are created according to the relevant legal
requirements. Acompany can include one or more company codes. Acompany sfinancial statementsalso form the basis
of consolidated financial statements.
All of the company codes within a company must use the same chart of accounts and fiscal year. However, each company
code can have a different local currency.
Company Code
Smallest organizational unit of external accounting for which a complete, self-contained set of accounts can be created.
This includes the entry of all transactions that must be posted and the creation of all items for legal individual financial
statements, such as the balance sheet and the profit and loss statement.
Chart of Accounts
The chart of accounts list is a directory of all charts of accounts that can be used in a client and must assign one chart of
accounts to each company code. Therefore need at least one chart of accounts for a group company in the system. The
chart of accounts is shared by Financial Accounting as well as cost/revenue accounting. The items in a chart of accounts can
be both expense or revenue accounts in Financial Accounting and cost or revenue elements in cost/revenue accounting.
We can define the length of the G/Laccount numbers. The maximum length isten characters. Internally, the system keeps
the account numbers with a ten character length. The system pads purely numeric account numbers with zeroes from the
left, and alphanumeric account numbers from the right.
Account Groups
The account group is a summary of accounts based on criteria that effects how master records are created.

2009
The account group determines:
The number interval from which the account number is selected when a G/L account is created.
The screen layout for creating G/L accounts in the company code-specific area
Parallel Accounting
General Ledger Accounting allows us to perform parallel accounting by managing several parallel ledgers for
different accounting principles.
Integration of Legal and Management Reporting
In General Ledger Accounting, we can perform internal management reporting in parallel with legal reporting. For
this purpose, the Profit center accounting functions are integrated with General Ledger Accounting.
Segment Reporting
General Ledger Accounting supports the segment reports required by the accounting principles IFRS(International
Financial Reporting S
tandards) and USGAAP(Generally Accepted Accounting Principles). For this purpose, General
Ledger Accounting contains the segment dimension.
Controlling area
The Controlling Area isan entity in Controlling. All the COtransactionsin R/3 system would be entered with respect to the
controlling area. There will be one controlling area (1000 Greaves Controlling Area) to which all the company codes will
be assigned. All Company codes shall use same Chart of Accounts and Fiscal Year Variant.
Fiscal Year
Usually a period of twelve months for which a company regularly creates financial statements and checks inventories
The fiscal year may correspond exactly to the calendar year, but this is not obligatory.
In Greaves Cotton Limited And Premium Energy Transmission Limited we will be having to Fiscal Year
1. 0L- Fiscal Year From April to March. It will be leading Ledger .
2. SL- Fiscal Year From July to June. It will be Secondary Ledger .
We have to enter the documents in any one ledger and the entry will be posted in other ledger accordingly.
Posting Period and Counting

2009
Special Periods
Special posting periods that subdivide the last regular posting period for closing operations.
Irrespective of how we have defined our fiscal year, we can also use special periods. Special periods subdivide the year-end
closing period. They therefore merely divide the last posting period into several closing periods. This enables us to create
several supplementary financial Statements
A fiscal year usually has 12 posting periods. In General Ledger Accounting, we have defined four special periods so out total
accounting periods will be 16 for Greaves Cotton Limited and Premium Energy Transmission Limited.
Cost Centre
An organizational unit within a controlling area that represents a defined location of cost incurrence. The requirement at
Greaves is to capture the costs Department wise. Cost centers would be divided into main groupings: Example:
1) Production
2) Service
3) Administration Cost Centers
4) Selling & Distribution Cost Centers
Profit Centre
Create KE51
Change- KE52
Display:-KE53
A profit center is an organizational unit in accounting that reflects a management-oriented structure of the organization for
the purpose of internal control.
We can analyze operating results for profit centers using either the cost-of-sales or the period accounting approach. By
calculating the fixed capital as well, we can use our profit centers as investment centers.
We at Greaves Cotton have defined the logic as

2009
Profit Center: 1372003
1 for Greaves Cotton ltd.
3 for BG III
72 for LEU I as per legacy.
003 for Engines (Unique Product)
Last three digits will be for Unique product or Spares or Common.
To create Profit Center follow the below path:
We have to enter the profit center number.
If we have to copy for the existing profit center, we can give that Profit center
After we press: Enter or button on the screen.
The below screen will appear, enter the Profit center details.

2009
Then go to the Company Code Tab on the Screen as shown below
After we press Save button on the top row of the screen.
Again go to the Basic Data Tab and use can see that the Profit Center is in Inactive mode.

2009
Then click the activate button
After activation it will be seen as below
Then Click the Save button on the top row of the screen. The profit center will be created.
Profit Center Group
Create - KCH1
Change: KCH2
Display: KCH3
A profit center group is a hierachical structure of profit centers.
We can use profit center groups to group profit centers together according to company-specific criteria.
Use
Profit center groups are used for reporting, allocations or in various planning functions, where it does not make sense to
enter or display data at the lowest level (with a high level of detail).
The standard hierarchy is a special type of profit center group. It has to contain all profit centers belonging to the
controlling area and reflect the organizational structure of Profit Center Accounting.
We can collect cost centers according to various criteria into groups. This enables us to use cost centers to depict the
structure of the organization in the SAP System.
Enter the Profit Center Group.
Press the Button to view cost center groups.
Press enter or button and the below screen will appear.

2009
Cost Centre
Create - KS01
Change: KS02,
Display: KS03
A cost center is an organizational unit that represents a defined location of cost incurrence. To create Cost Center
follow the below path:

2009
Give the Controlling area.
After we press: Enter
The below screen will appear, enter the cost center details &
Valid from Date Valid till Date

2009
After we press ENTER, the below screen will appear.
Provide the necessary details and press enter the Description for the data fed will be shown as shown above screen.
And press SAVE button in the top of the row.
Cost Centre Group
Create - KSH1,
Change: KSH2, &
Display: KSH3
We can collect cost centres according to various criteria into groups. This enables we to use cost centers to depict the
structure of the organization in the SAP System.
We can use the groups to build cost centre hierarchies, which summarize the decision-making, responsibility, and
control areas according to the particular requirements of the organization. The individual cost centres form the
lowest hierarchical level.
Enter the Cost Centre Group.

2009
Press the Button to view cost centre groups.
Press enter and the below screen will appear.
Posting Keys
Definition
Two-character numerical key that controls the entry of line items. The posting key determines:
Account type
Debit/credit posting
Layout of entry screens
Use
When we enter a posting, enter a posting key for each item. This key determines how the item is posted. Posting keys are
defined at client level and therefore apply to all company codes. The posting key determines:
The data we can enter in the line item
How data we post is processed
How the system updates the data we enter
Posting keys are differentiated by customer, vendor and G/L accounts. Apart from the General Ledger Accounting (FI-GL)
and Accounts Receivable and Payable (FI-AR/AP) components, there are also posting keys for asset and material accounts.

2009
The following figure illustrates the posting key:
S
AP delivers predefined posting keys with the standard system. The following table lists some of the posting keys in the
standard system.
Integration
The document type specifies which account types we can post to. The posting key specifies which account types we can
post to. A posting key can only be entered for an account type which is permitted for that document type.
Posting key Name Debit/Credit
0 Act assignment model
1 Invoice Debit
2 Reverse credit memo Debit
3 Bank charges Debit
4 Other receivables Debit
5 Outgoing payment Debit
6 Payment difference Debit
7 Other clearing Debit
8 Payment clearing Debit
9 Special G/L debit Debit
11 Credit memo Credit
12 Reverse invoice Credit
13 Reverse charges Credit
14 Other payables Credit
15 Incoming payment Credit
16 Payment difference Credit
17 Other clearing Credit
18 Payment clearing Credit
19 Special G/L credit Credit
21 Credit memo Debit

2009
22 Reverse invoice Debit
24 Other receivables Debit
25 Outgoing payment Debit
26 Payment difference Debit
27 Clearing Debit
28 Payment clearing Debit
29 Special G/L debit Debit
31 Invoice Credit
32 Reverse credit memo Credit
34 Other payables Credit
35 Incoming payment Credit
36 Payment difference Credit
37 Other clearing Credit
38 Payment clearing Credit
39 Special G/L credit Credit
40 Debit entry Debit
50 Credit entry Credit
70 Debit asset Debit
75 Credit asset Credit
80 Stock initial entry Debit
81 Costs Debit
83 Price difference Debit
84 Consumption Debit
85 Change in stock Debit
86 GR/IR debit Debit
89 Stock inwrd movement Debit
90 Stock initial entry Credit
91 Costs Credit
93 Price difference Credit
94 Consumption Credit
95 Change in stock Credit
96 GR/IR credit Credit
99 Stock outwd movement Credit
Debit Customer
Credit Customer
Debit Vendor
Credit Vendor
General Ledger
Document Type
Document types are valid for all clients. We specify a number range key for each document type. We create the desired
number range intervals for each number range key based on the company code. This means that we can specify intervals
of different sizes for the same number range.

2009
The preset document types cover business transactions
in Financial Accounting for:
o General ledger accounting
o Accounts receivable
o Accounts payable
o Asset accounting
o Consolidation
in Materials Management and Sales and Distribution for:
o Goods receipt and issue
o Incoming and outgoing invoices
o Physical inventory (stocktaking)
o Invoicing
Some Default Document Type In SAP
Description
Document
Type
Reverse
DocumentType Account types
Asset Posting AA ADKMS
Accounting Document AB AB ADKMS
Depreciation Pstngs AF AF AS
Customer Document DA DA DS
Customer Credit Memo DG DA DS
Customer Invoice DR DA ADMS
Customer Payment DZ DA DS
Vendor Document KA KA AKMS
Vendor Credit Memo KG KA AKMS
Vendor Invoice KR KA AKMS
Vendor Payment KZ KA AKS
Invoice - Gross RE RE AKMS
Invoice - Net RN RN AKMS
Billing Doc.Transfer RV AB ADS
G/L Account Document SA SA ADKMS
G/L Account Posting SB AB S
Cash Document SK AB S
Adjustment Document SU SU S
Data Transfer UE ADKMS
Goods Issue WA AMS
Goods Receipt WE AMS
Inventory Document WI AMS
Goods Issue/Delivery WL AMS

2009
Net Goods Receipt WN AMS
Payment Posting ZP ZP ADKMS
Bank Reconciliation ZR ZR DKS
Payment by Check ZS DKS
Payment Clearing ZV ZV ADKMS

2009
CHAPTER 2
MASTERS
General Ledger Account Codes
A G/Laccount number identifies the account code in a Chart of accounts and has to be defined for each Company Code
before any postings can be made to the same.
In case of GreavesCotton Limited and Premium Energy Transmission Limited , the GLaccount hasbeen defined asa 6 digit
numerical code having a series as displayed in the slide herein below.

2009
Creation of Account Codes (FS00)
Listed below are the steps that need to be followed for creating a new GL account.
Enter the number of the account code and the corresponding Company Code in which it is to be created.
S
elect the appropriate Account Group from the dropdown list.
Specify whether the account is of the type Balance Sheet or P & L type.
Enter a description for the account.
Click on create button , provide the value as we require

2009
Before opening a new GL account, execute tcode F.10 and ascertain the next free number available in a Account group.
Goto the tab for Control Data and specify the following
Specify the currency. This normally gets defaulted from the Company Code currency.
Incase if an account is a Reconciliation account, indicate the same in the field provided.
Select the check box for Open item management & Line item Display . In case of P&L items, the Recon
account and Open item management field is
Not relevant and hence can be skipped.
Note that a Reconciliation account will be used for Vendor and Customer sub-ledgers and cannot be posted to directly.
Based on the value entered in the Sort Key, the Assignment field in the GL account gets populated.
Goto the tab for Create/Bank Interest
S
pecify the Field S
tatusGroup (FS
G). A FS
Ghelpsin identifying the fieldsthat are to be entered while booking an
entry to the GL account.
Incase of Cash and Liquidity related GLaccounts, indicator for Planning Level and Relevant for Cash Flow needs
to be populated. Such GL accounts are then displayed in the Cash Management reports.

2009
Saving the entry will now create the GL account in the
specified Company code.
Extending GL accounts (FS15)
Remove the tick for field check file only check box
Creation of Primary Cost Element (KA01)
We can go with the following Navigation path

2009
Or with the T .Code KA01
Give the Cost element and the Dates Valid
From and To Dates . SAP will allow we to
enter the transaction within these dates.
Cost element category should either be
1 for primary costs,
11 for revenue accounts and
12 for revenue deductions which is coming from SD madule.

2009
Maintaining Cost and Activity Type(KP26)
Controlling area
S
elect ControllingArea as 1000 for both GCL & PETL
Planner Profile
S
elect Planner Profile as S
APALL

2009
There are various layouts available for maintaining Activity Prices. We have to select 1-201 Activity Types with Price:
Standard
Version should be 0
Provide the From and To Period with Fiscal Year.
Select Entry Mode as Free
Click on Overview button to proceed further
Fill in the
Unit i.e H for hours ( used for all the hour based rate)

2009
Fixed Price and the Variable Price for the activity type for per unit i.e Hour.
Price unit should be 00001
Allocation Cost Element- Provide the Secondary Cost Element which should start from 943***
Allocation Cost Element
The allocation cost element is a secondary cost element, under which the activity type or business process is allocated.
The allocation cost element is the central characteristic used in all CO postings. It is therefore also an important criterion
for reporting - for example, many reports are structured according to the posted cost elements.
The allocation cost element must have been created in the cost element master data as a secondary cost element of
category 43 "Allocate activities/processes".
If we want to maintain activity price for more than one period then click on following
screen appears
Here we can maintain for multiple periods at a time.
Click on save button to save the records.
Creation of Secondary Cost Element (KA06)
Or we can use the following navigation Path

2009
Provide the Cost Element Number
And Date Valid From to
And click on to save the Cost Element
Provide the Name and the Description and Cost element Category as 43 Internal Activity Allocation
41- Over Head Related Cost element
42 Assessment Related cost elements
43- Internal Activity Allocation
Creation of Vendor Master Codes (FK01)

2009
Listed below are the steps that need to be followed for creating a new Vendor account code.
S
pecify the Company Code and the Account group using which the Vendor code needs to be created. Based on
the Account group selected, the number range gets decided and it may be a External or Internal numbering
sequence.
Click on Enter and in the displayed screen enter the Address details of the vendor. Note that the address as
entered here gets printed on the TDS Certificates and other external correspondences with the Vendor.
Click on the Tab for CIN Details and specify the PAN and S
ervice Tax numbersof the Vendor wherever available

2009
Coming back to the main screen will display the following tab wherein a link can be established if Vendor is also a
Customer.
Due to this linkage the combined balance of the Vendor/Customer can be available in a single line item display report.
In the next tab, the bank details of the Vendor can be maintained. An important indicator in this tab is the check box for
Individual Payee .
Selecting this activates a special screen during document entry wherein the description of the Vendor can be entered.
A cheque printed for such a document will then be in the name as maintained in the document and not as per the Vendor
Master record.

2009
In the tab for Payment transactions the detailslike Reconciliation account and S
ort key needsto be specified.
The Cash Mgmt Group field is mandatory and a appropriate value needs to be entered therein. This again will be help in
displaying the Vendor
Inflow/outflow positionsIn the Liquidity Management reports.
In the tab for Payment transactions , the Payment terms and Payment methods can be entered. These serve as default
values at the document entry level

2009
and can be changed while booking the transaction.
The check box for Chk double invoicing also needsto be selected.
In the tab for Correspondences specify a value in the field for Account statement . This helps in generating Account
Statement correspondences
To the Vendor.

2009
In the tab for WITHOLDING TAX specify the TDS S
ection under which tax is to be deducted from the Vendor
Invoice/Payments.
These codes then appear as a default during Document entry and can be changed while booking a transaction.
Note that only when a TDSCode is maintained in the Vendor master will the same get defaulted at document entry level
else no TDS will get deducted.
COindicatesthe statusof the Vendor eg. Company or Others. The checkbox for Liable needsto be selected in order that
TDS may get deducted.
Creation of Customer Master Codes (FD01)
S
elect the appropriate Account group and the Company code in which the Customer needs to be created. Based on the
Account group selected,
the number range gets decided and it may be a External or Internal numbering sequence.

2009
Click on Enter and in the displayed screen enter the Addressdetailsof the Customer.
Click on the Tab for CIN Details and specify the PAN and S
ervice Tax numbersof the Customer wherever available

2009
Coming back to the main screen will display the following tab wherein a link can be established if Vendor is also a
Customer. Due to this linkage the combined balance of the Vendor/Customer can be available in a single line item display
report.
In the next tab, the bank detailsof the Customer can be maintained. An important indicator in thistab isthe check box for
Individual Payee .
Selecting this activates a special screen during document entry wherein the description of the Customer can be entered.
A cheque printed for such a document will then be in the name as maintained in the document and not as per the
Customer Master record.

2009
In the tab for Payment transactions the detailslike Reconciliation account and S
ort key needs to be specified.
The Cash Mgmt Group field is mandatory and a appropriate value needs to be entered therein. This again will be help in
displaying the Customer
Inflow/outflow positionsIn the Liquidity Management reports.
In the tab for Payment transactions , the Payment terms and Payment methods can be entered. These serve as default
values at the document entry level
and can be changed while booking the transaction.

2009
In the tab for Correspondences specify a value in the field for Account statement . This helps in generating Account
Statement correspondences To the Customer.

2009
In the tab for WITHOLDING TAX specify the TDS S
ection under which tax is to be deducted from the Customer
Invoice/Payments.
These codes then appear as a default during Document entry and can be changed while booking a transaction.

2009
Creation of Internal Order Master (KO01)
We can use following navigation path
Mention the type of Internal Order we are going to create
Press Enter, a popup appears and asks for controlling area. It will be always 1000

2009
Provide the values as shown above
Currently the System Status is shown as CRTD ( which means that created status)
Put the system status as REL (release)

2009
S
elect statistical order check box (if we select this check box values in the internal order can be viewed but not allow to
allocating the cost to some other cost object (Eg: cost center, internal order)
(If order is in CRTD (create) status we can maintain only plan values
REL (release) status system will allow plan and actual values
TECO (technically complete) status system will allow only actual values
Close statussystem won t allow any value to post.)
Click on save button.
Creation of Asset Master Codes (AS01)
Specify the Asset Class under which an Asset is to be created as also the Company code of creation.

2009
Enter details relating to the asset like description, serial number, Inventory number etc. in the field provided.
Enter the Cost Center and the Location where the asset is situated. Incase if the cost center or location changes then the
same can be
Modified in the asset master by choosing the option of More Intervals . Incase if shift depreciation isto be activated then
the field Multiple S
hift can be activated and along with the Variable portion field in Depreciation areas the required
rate can be manipulated.

2009
The Depreciation Areas get defaulted as shown herein below.
The Group Asset field has been mandatory for input and is basically used for tracking Depreciation as per the Income Tax
Act.
Specify the appropriate Block of Assets to which the individual asset pertains to.
The field S
crap Value or S
crap %needs to be entered incase if the asset is expected to have a residual value at the end of
useful life of the asset.

2009
The field Variable dep portion isto be used along with Multiple shift for calculating depreciation at a higher rate. S
aving
the transaction will create a new asset code
Creation of Asset Sub-number Codes (AS11)
Navigation Path
An Asset sub-number is normally created when a material and significant extension is made to the main asset which has its
own depreciation terms and useful life as distinct from the main asset.
Enter the main asset number for which a sub-number needs to be created and click on enter. By default all the asset details
as provided in the main asset gets copied onto the asset sub-number.

2009
Display of Asset Master Codes (AW01N)
Navigation Path
The Asset master display can be had through AW01N and is as shown below. In the tabs for Planned Values the
capitalization details are available.
In the Posted Values, the month wise depreciation figures can be know whereas the tab for Comparisons the year-wise
depreciation details can be had.

2009
The followingshowsthe view of the Posted Values tab
The followingshowsthe view of the Comparisons tab

2009
Creation of Bank Key Masters (FI01)
Creation of House bank (FI12)

2009
Provide the company code as shown above and press enter. bellow screen click on new entries
Click on Create button. Following screen appears. Provide all the information and save .

2009
We will be creating separate house bank for each bank A/c
Now create the New GL Accounts for BANK
If we have are doing reconciliation for the BANK we have to maintain three (3) Bank A/cs for the Each Bank viz.
1. KOTAK BANK MAIN A/c
2. KOTAK BANK RECEIPT A/C
3. KOTAK BANK PAYMENT A/C
All the credit transaction should go to Receipt A/c and all the Debit entries should go to Payment A/c
Note : No entries should be passed manually in the system in the BANK MANIN A/C . System will transfer the entries at
the time of Bank Reconciliation from Inflow & Outflow to Main A/c
All the Creation of Main Bank A/cCode should end with 0
All the Creation of Receipt Bank A/cCode should end with 1
All the Creation of Payment Bank A/cCode should end with 2

2009
Please take care that in the main Bank A/c Only line items to be selected . For inflow and outflow accounts we need to
select open item management check box in control data tab
Linking of BANK GL A/c with House banks and Bank Reconciliation
For Main Bank A/c go to FI12 (House Bank Create Screen) and mention the Main Bank A/c Code in front of GL
For Payment Bank A/c go to FBZP Customizing : Maintain Payment program
Click on BankDetermination

2009
Select the Desired Company and Click on Bank Accounts following screen appears (OBVCU)
Click on New Entries Tab and enter the Bank Payment A/c and Save.
For Payment Bank A/c go to SPRO

2009
No need to do any individual banks . As per the configuration the system automatically takes the account codes ending
from 0 and adds 1to that number and treats as Inflow A/c .
Maintaining Cheque Lots for Each Banks (FCHI)
Or we can use following navigation
Else we can go to T.Code FCHI

2009
Go to Edit
No sooner that a cheque lot is received from the bank, the same needs to be entered in the system before it can be utilized
automatically by the system. This is done through FCHI. Enter the bank details and click on Enter.
In the above screen click on crate button .
(Each cheque book we need to call as cheque lot).
Mention the various check lot to be used for Automatic and manual Payments

2009
Chapter -3
Transactions
Booking a Journal Voucher (F-02)/ (FB50)
Navigation Path
The document entry screen comprisesof Header and Line item details to be filled in while bookinga transaction.
Details entered in the Header are relevant for the whole document. There can be a maximum of 999 lines in a single
document.
Enter details like Date, company code text etc in the Header area of the screen.
Enter Line item details like Posting Key and the corresponding Account code and specify the amount per line item. Incase
of expense accounts
It is mandatory to enter a Cost Object like Cost Center, Internal Order or Profitability S
egment against it. The Assignment
field can be used for the purpose
Of sorting of line items.

2009
Entering+and clickingon Enter will automatically copy the text asentered in the earlier line items
Once all the line items have been entered, simulate the entry. This will display the accounting entries that will be passed on
saving the transaction.
In case of unbalanced entries, system will not allow the posting of the document. Check that the Dr and Cr amounts are
equal for posting.

2009
Journal Entries with T-Code FB50
It is preferable to go with T.Code FB50 as in thismode we need not to remember Posting Keys for Debits and Credits . We
can pass entries with Debit and Credits and in the single screen.

2009
Note- On the left hand side of the screen there we see some signal type indicator . We cannot post the transaction until
it turns to Green colour .
As the Total Debits and Total Credits amount are equal the signal turns green and we are able to post the transaction.
Provide the valuesasshown above and click on simulate button. S
ystem will generate the followingscreen
Simulation means the display of entry before posting it finally. We should always simulate the transaction to check the
accuracy of the transaction. As we simulate we can view the following details of the transaction.
If the Transaction iscorrect we can Click on save button else we can modify the transaction. Aswe save the transaction a
document number is generated at the bottom line of the screen.
In case we are not sure about the correctness or we don t want to post the transaction immediately, we can Park the
transaction by clicking on button. The system will neither move this document to Financial Books nor it will
generate the Document number for the transaction.
After we are confirm about the transaction we can Save the transaction from the Park mode to Post Mode
Display of Journal Voucher (FB03)

2009
In the above screen click on document list button .
Provide the values as shown above. We can search the document on the various criteria.
Click on execute button. As we click on the
Booking Accrual/Deferral Document (FBS1)
Accrual / Deferral Documents

2009

2009
Save the document.
Reverse Accrual/Deferral Document (F.81)

2009
In the above screen click reverse document button.
Individual Reversal (FB08)
We can use the following Navigation
Click on save button
Creation of sample document (F-01)
We can use following navigation

2009
Click on overview button to view the document
And click on save button.
Display Sample Document (FBM3)
We can use following Navigation

2009
For using the sample document at regular transaction level
Passing the Entry Using Sample Document (FB50)
Click on post with reference as shown in the above screen

2009
Provide the document number and others which shown in the above screen
Press enter
Change the Document TYPE as required and press enter continuously until the following screen appears

2009
Booking of Recurring Entries (FBD1)
We can also use the following navigation path
A template can be maintained for entries that are frequently passed each month. S
uch entriesare referred to as Recurring
Entries .
As a onetime activity the entry can be maintained and the same recalled each month and the entry posted.

2009
Enter detailslike First run, interval, Document type etc. in the Header. In the line itemsenter the accountsthat need to be
posted to.
First Run On: - Date from which the first recurring entry is to be carried out.
Last Run On: Date up until which the final recurring entry is to be carried out.
Interval: Date up until which the final recurring entry is to be carried out.
Run Date: Calendar day on which the recurring entry is to be carried out. If we do not specify a day, then the calendar day
which we entered in the "First run on" field is used.
Document Type : Mention the desired document Type
Providing all the values , press enter .

2009
Enter Line item details like Posting Key and the corresponding Account code and specify the amount per line item. Incase
of expense accounts
It is mandatory to enter a Cost Object like Cost Center, Internal Order or Profitability S
egment against it. The Assignment
field can be used for the purpose Of sorting of line items.
Click on simulate to check the entry and then save the entry and after saving the following lines appears in the
bottom of the screen.
We can go to Documents and click on display to see the previous entry passed.

2009
Posting of Recurring Entries (F.14)
Else we can use the following navigation path.
Enter the document number and the period for which the recurring entry needs to be generated. The session
name can be entered manually for
Easy identification. Executing the transaction now will generate a Batch input session.

2009
A batch input sessions gets created that needs to be further processed either in the foreground, background or
errors only mode. If processed
In the foreground mode, each line item screen will come up and it is possible to change the values during
posting.
Provide the values as shown above and click on
System will create the session.

2009
Or We Can Go With T.code SM35
Select the respective session and click on process button . System popup following screen
Click on the Process Button
The system processes the recurring entries showing following screens go on pressing Enter till the document is
posted

2009
Chapter 4
Accounts Payable
Vendor Invoice Posting (FB60) / (F-43)
Navigation Path
Provide the necessary information and simulate the transaction
Decide on the Company code in which the Invoice needs to be posted and the currency involved. One can also specify the
currency conversion rate that needs to be adopted for the transaction. In the reference field enter the Invoice number of
the Vendor Invoice and the corresponding text.
By default, the above screen for TDS deduction comes up. TDS is applicable on Invoicing or Payment whichever is earlier.
Remove the TDScodesagainst PAYMENT( CP) line asthisindicatesTDSdeduction at the time of payment. Incase if

2009
manual adjustments need to be made, the base amount and corresponding TDS Amount needs to be specified. This is of
particular importance in cases where TDS has been deducted on Advance payment. Enter the net amount here so that TDS
gets deducted on the reduced amount.
The light next to the tabs reflects the balance in the document currency:
Balance does not equal zero (posting is not possible)
Unchecked status (initial status, posting not yet carried out)
Balance equals zero (posting carried out)
We can define how we want the debit/credit indicator to appear in Editing Options
Simulate: A document overview appears in which we can select various options for data preparation.
If the entry is ok then Save the entry the Document number will be generated.
Note : We can use FB60 or F-43 for the voucher entry in FB60 we have debit credit screen and in T.Code F-43 we have
to use posting keys to do the transactions .
The procedure for booking of Vendor Invoices remains the same except that a special screen for inputting the Vendor
name and address details comes up. Note that the cheque will get printed as per the name specified in the name field. This

2009
functionality can be used effectively for making payment to vendors where the name changes each time eg. Payment to
Government authorities for Income tax, stamp duty etc.
Vendor Credit Memo Posting (FB65)/ (F-41)
Only we have to select the transaction type as credit memo in FB60 / F-43 or we can use FB65/F-41 for creating credit
memos for accounts payable.

2009
Vendor Invoice Payment ( F-53) / (F-58)
Click on enter payment button .

2009
Click on process open item button .. system will open the following screen

2009
If we want change proposed value as shown in the above screen(amount entered 14000 but the invoice value is 14600.)
click on charge of diff. button .Click on line item screen
Remove the value put the * in the amount field click on button
Not assigned field need to always 0. Simulate and post the document
After we save the document the following screen appears
.
Click on the Spool number following screen appears
Click on the ICON below Type Cheque will popup asbelow

2009
Advance Payments to Vendors (F-48)
Advance payment to vendors are identified in S
AP through the use of S
pecial GL indicators. Incase of Greaves Cotton
Limited and Premium Energy Transmission Limited , the indicators that can be used are ____________________. Note that
the postings through these indicators get routed through the advance account and not the normal Reconciliation account

2009
Specify the Company code, Vendor Code, bank account number and the amount that is to be paid as an Advance and click
on Enter.
The above screen for TDS gets defaulted. Incase if no TDS is to be deducted then the TDS codes needs to be manually
deleted from the above screen.

2009
Simulate the transaction and Post
Execute FBZ5 with the payment document generated as above.
Clearing the Down Payment (F-54)
( Converting the SPl GL to Normal General A/c )
We can use the following navigation menu.

2009
Provide the Vendor Code and the Date
If System Displays the Invoice Number in the Primary Screen remove the Invoice and click on
Note : - Provide the Narration in the Text field else the system will not allow to save the document.
S
elect the Transfer Posting and provide the amount we want to match with the invoice and
simulate the transaction.

2009
If the Transaction is ok click on save
Now we can clear the invoice with the advance amount (F-44 Clear)
Now we can select process open items and clear the bills

2009
Memorandum Entries / Noted Items (F-57)
Or we can use the following navigation Path
The process is same as discussed in the Accounts receivable Noted Items.
Import process
Purchase order:
In the purchase order item data views click on conditions tab select the custom duty conditions for view and change the
custom vendor if required.

2009
Select respective line and click on in the above screen.

2009
System will show you the above screen provide the vendor code.( at present system proposing from condition record
MEK1)
For clearing forwarding sake we are using ZIF1 condition do the same thing for providing vendor.
Refer purchase order no 4500000720 plant 1320.
For capturing custom duty vendor invoice go with t.Code: MIRO

2009
With out providing any purchase order number provide the inr value in currency field as shown bellow
Then provide the purchase order number in purchase order field as shown bellow
Select the planned delivery costs in the above screen and press enter
System will propose you the bellow screen

2009
Select the respective vendor click on right button
Copy the values from net PO value field and past in the amount column and put quantity as 1 in each column as
shown bellow

2009
Put the value in the amount field as shown in the above screen and simulate and save

2009
Material document no 5105600324
Go with MIGO
For goods receipt
Provide the purchase order number as shown bellow
Press enter

2009
System will propose above screen provide the miro document number and year press enter
Select item on check box in the above screen fill all the mandatory fields and click on post button
Then release the goods from block stock select A05 document type as shown bellow in MIGO transaction provide
the purchase order number system will propouse you bellow screen again provide the MIRO document number

2009
Fill the excise invoice number and date, provide the storage location in the above screen select item ok check box and click
on post button. GR fi entry
Excise entry
Invoice verification for import vendor is the same process

2009
Go with t.Code: MIRO
In the above screen you need to select 3 goods/services items + planned delivery costs
And provide the purchase order and press enter
Scroll down for getting all line times in the order

2009
Now system will show you all the lines deselect the line which not relevant for import vendor as shown bellow Eg: I have
deselected 11 number in the bellow screen
Simulate and post
For posting clearing forwarding agent invoice go with T.code: MIRO

2009
In the above screen put currency inr after
Provide the purchase order number select planned delivery costs
Press enter
Select respective vendor
Simulate and post

2009
Chapter 5
Accounts Receivable
Customer Invoice (FB70)
We can go with the following Navigation Path
Click on Simulate and we will get the following entry if it is correct we can save the same

2009
We can view the General ledger View how it is posted in Journal Ledger .
Booking Customer Invoices (F-22)
Specify the Company code for which the Customer Invoice is being booked. Enter the Invoice number in the Reference field
as shown in the screen.
Note that the values entered in the Text field will get printed on the Sales Invoice generated. Enter the Income account in
the next line item and click on Enter

2009
Customer Collection (F-28)
Go with following navigation

2009
In the Receipts Transaction we will be using Inflow Bank A/c Code
Provide the Narration
for the Transaction
Mention the Cheque
Number in the
Assignment Field
Mention the Cheque
Bank Name
Mention the Cheque
Recd Branch Name
Provide the Cheque
Date in the Value Date
Field

2009
Printing Pay in Slips (ZPAYSLIP)
Provide the
Bank GL Code
Company Code
Document Type
Date
Execute the report we get the following output
Clearing Open Line Items in the GL account (F-03)
We can use following Navigation

2009
Click on process open items button
Customer advance (F-29)
Mention the Special GL Indicator as 2 then only system will accept the transactions.

2009
Simulate
Save the document
Clearing Advance (F-39)
This application can be used to transfer

2009
Remove the value in the invoice ref field and click on
Click on simulation
Click on blue colour line item

2009
fill the missingvaluesin the TEXT field (Narration) and save the document
Refund of Advance to Customer (F-31)/(F-18)
In case of any payments made to the Customer foe refund of advance or any other purpose we can use T.code F-31 / F-18
or following navigation . It similar to the normal payments made to vendor.

2009
Click on Process Open Items button
Select respective lines and save.
Clear Customer Invoice with Advances ( F-32)

2009

2009
The Jounal Entry passed in the system for clearing the transaction will be as follows

2009

2009
FOREIGN EXCHANGE REVALUATION / RESTATEMENT
Maintain The Foreign Exchange Rate (OB08)
or S_BCE_68000174 - Enter Translation Rates
Or we can use following navigation
Exchange rate type M
Maintain the rates as shown above and save
Note: When we post and clear documents, the system uses the exchange rates defined for rate type M to translate the
currencies. There must be an entry in the system for this rate type.
The exchange rates apply for all company codes it is on the client code level.
All the existing exchange rates appear in a table in the Change View Currency Exchange Rates : Overview screen.
To change an existing value, we simply overwrite it.
To delete an entry, select it and choose Delete.

2009
To make a new entry, choose New entries. Enter the following data:
1. Exchange rate type
2. From and To which currency the rate applies.
Realised Gain Loss
Now we can do the Normal Transaction
Booking Vendor Invoice in Foreign Currency
Making Payment in Foreign Currency
Click on DISPLAY CURRENCY to view the exchange gain loss on the payment transaction.

2009
Unrealized Gain Or Loss
T.code: FAGL_FC_VAL - Foreign Currency Valuation (New)
We can use following navigation also.
Use
All open items in foreign currency are valuated as part of the foreign currency valuation:
The individual open items of an account in foreign currency form the basis of the valuation, that is, every open item of
an account in foreign currency is valuated individually.
The total difference from all the open items in an account is posted to a financial statement adjustment account. The
account therefore retains its original balance.
The exchange rate profit or loss from the valuation is posted to a separate expense or revenue account for exchange
rate differences as an offsetting posting.
Features
Unrealized exchange rate differences
When we valuate open items in foreign currency, the exchange rate difference determined is posted as an unrealized
exchange rate difference.
Realized exchange rate differences
For an incoming payment, that is, when we are clearing the open items, the current exchange rate is determined. Since the
exchange differences that were not realized are reversed, the full exchange rate difference is posted as realized.
Reversing exchange rate difference postings
On the specified reversal date or in the reversal period, the posted exchange rate differences are automatically reversed
after the valuation run by an inverse posting.
Activities

2009
Provide the value as shown above

2009
Now system will crate the batch for execute the batch go with T.Code: SM35

2009

2009
Valuation area 10 need to use for 0L ledger.
And valuation area 20 need to use for SL ledger.
Revaluation / Restatement of General Ledger A/c
0ur foreign currency balance sheet accounts are valuated as part of the foreign currency valuation:
The balance, that is, the foreign currency balance of the G/L account managed in the foreign currency, forms the
basis of the valuation for each foreign currency and foreign currency balance sheet account.
The result of the valuation is posted to the valuated account or to a adjustment account.
The exchange rate profit or loss from the valuation is posted to a separate expense or revenue account for
exchange rate differences as an offsetting posting.
BILL OF EXCHANGE
Posting Procedure for Bills of Exchange Receivable
For bills of exchange receivable, there are three events which are posted in Financial Accounting:
Payment by Bill of Exchange
Firstly, the payment by bill of exchange is posted and used to clear the receivable against the customer. There is a now a
bill of exchange receivable which is recorded on the customer account and the special G/L account.

2009
Bill of Exchange Usage
If the bill of exchange is used for refinancing and is passed on to a bank, then the bill of exchange usage must be posted.
The bill of exchange liability (liability to recourse) that we now have is recorded on special accounts in the system until it
has expired.
Cancel the Bill of Exchange Liability
Once the due date of the bill of exchange has elapsed, including any country-specific period for the bill of exchange
protest, we can cancel the bill of exchange receivable for our customer and the bill of exchange liability.
Navigation
Acceptance of Bills Of Exchange (F-36)

2009

2009
Simulate the Transaction

2009
Post the transaction .

2009
Bill Discounting (F-33)

2009

2009
Reverse Contingent Liability (F-20)
Enter + in the entry field for which we want to reverse the transaction. And save the transaction.

2009

2009
The journal Entry passed at the acceptance of Bills of Exchange
a) Invoice: FB70
01 Customer Dr 25000 Customer Reconciliation A/c
50 To Revenue 25000
b) Acceptance of Customer F-36
09 W Customer Dr 25000 Bill Of Exchange
15 To Customer 25000 Customer Reconciliation A/c
11 If manually entered.
c) Discounting F-33
40 Bank Inflow Dr 24500
40 Bank Charges Dr 500
50 To Bill Discounting 25000 Normal GL Credit
d) Reverse Contingent Liability F-20
40 Bill Discounting Dr 25000
19 W To Customer 25000 Bill of Exchange
Entries for Bill of Exchange Receivable
Assume we transfer the bill of exchange receivable to our bank for discounting. The bill amount is credited to our bank
account and shown on our bank statement. Given a maturity period of 90 days and a discount rate of 7 %, the bank charges
a discount of USD 199.50. The bank also levies charges of USD 5.00 on we, which it adds to the discount charge, making a
total of USD 204.50.
The following entries arise from this example:
The incoming payment to our bank account is posted. The bank credits our account with USD 11,178.40 only, (USD 11,400
minus the bill of exchange charges). Once the incoming payment has been entered, the system posts the bank charges to
the corresponding expense accounts.
The system automatically posts an offsetting entry to a bank clearing account. This offsetting entry records the bill liability
(liability to recourse) to the bank. If our customer defaults on the bill of exchange when it becomes due, this liability to
recourse is realized and we are liable to pay the bill of exchange amount.
Reversing the Bill Liability
After the bill of exchange becomes due on September 13th and the country-specific bill protest period has elapsed, the bill
of exchange can no longer be protested and we are released from our potential liability. We can now clear the potential bill
liability from our bank clearing account and the bill receivable from the customer account. When we reverse the potential
bill liability, the system automatically posts to the special G/L account "Bills of exchange receivable" and clears the bill
receivable there.

2009
The following entries arise from this example:
We select the bill of exchange, the date of which has elapsed (including any protest period). The system generates a
reverse posting for the bank sub account and for the customer account, and clears the bill of exchange liability from both
accounts.
The system also posts a credit entry for the bill of exchange amount to the customer account and the special G/L account
"Bills of exchange receivable".
Memorandum Entries (Noted Items - (F-49))
We can use the following navigation also.
These can be used for recording Bank Guarantee or any other entries which we don t want to post in the customer Account
and the general ledger A/c. It will be working as single sided entry.
These entries will have no effect on the Financial Books. We use them only for the record purpose and after the purpose is
over we can reverse the same
Create the transaction with the posting key as 09 or 19
And the S
pecial GLIndicator as D
Customer Account Number and Amount is to be filled.
Fill in the Bank Guarantee Due Dates so that on the Maturity Date we can reverse the same.

2009
Fill up the Bank Guarantee Number in the Assignment Field and Details in the Text Field.
Thiswill be single screen entry and simulation isnot there asit doesn t affect the finance Books.
Save the Document
For viewing the noted items we have to go to Line Item Display FBL5N - Display/Change Line Items
Select the Noted Items for viewing only noted Items or select Normal Items and Noted Items for all the items.
We can view the noted Items in the Line item Display here it forms the part of the Customer Balance and effects the
balance of the Customer. If we want to see only Noted Items Click on Noted Items only and we can get the List of noted
Item.
Note : We can get the total listing for the Guarantees Received and Given / Taken.

2009
On the other hand if we see the Customer Ledger Balance it does not incorporate these Noted Items / Memorandum
Entries
Go to FD10N - Display Balances and see the balance
In the Above statement it was showing balance of 108000 INR
And in the Customer Balance it is showing balance of 98,000 INR
Hence it does not affect our financial Books by using Noted Entries.

2009
If we click on cumulative balance we can get the detail line item wise entry without noted items.

2009
In general it appears as the open item as it cannot be matched with any finance transaction. For Removing the Line items
from this statement, on the lapse of the guarantee or the Maturity of the same we have to reverse the document so that
the effect is nullified.
Reversal of Noted Entries (FB08)
As normal documents are reversed we can same way reverse the Noted Entries by using FB08
Provide the Noted Item Document Number, Company Codes, Fiscal Year and Reversal Reason
Save the Document

2009
Chapter 6
BANK & CASH TRANSACTION
Display cheque register (FCHN)
Or Following navigation can be used
Click on execute button, following screen appears showing details of all the cheques issued /cancelled .

2009
Printing Cheque (FBZ5)
Or we can use following Navigation

2009
Select the print option as shown above.
Click on the Spool Number and we can get the following report

2009
Manual issue of cheque (FCH5)
(this only for cheque number updation in the system)
Fill the values as shown above (provide the cheque number which wer are going to issue)

2009
Deleting Cheque Number (FCHF)
Click on execute button
Click on yes button
Note: In the case of deletion system delete the cheque number. We can use the same cheque number for another
document.
Voiding Cheques (FCH9/ FCH3)
Following Navigation path can be used

2009
Incase if cheques that have been unutilized need to voided, the t code FCH3 can be used to void the same.
Enter the Company code, Bank and cheques that need to be voided. Note that a range of cheques can also be voided
through thistransaction. S
pecify a void reason code and click on the icon for Void
Incase if cheques that have been already issued need to voided, the t code FCH9 can be used to void the same.
Enter the Company code, Bank and the cheque that need to be voided. Specify a void reason code and click on the icon for
Cancel Payment
Provide the values as shown bellow
Click on VOID tab
The cheque is voided abut the payment document is not reversed .

2009
Voiding Cheque With Reversal Document (FCH8)
Incase if cheques have been wrongly issued and hence the payment to be cancelled , the tcode FCH8 can be used to void
the same.
Enter the Company code, Bank and the cheque that need to be voided. Specify a void reason code and click on the icon for
Cancel Payment
The cheque gets voided and a reversal document gets posted in the system. Resultantly, the Vendor Invoice that had been
paid off getsa statusas Open from Cleared
Click on cancel payment button .
Resetting Of Cleared Document (FBRA)
Or use following navigation

2009
Provide the values as shown below
Now system will propose following screen
Press enter
System will propose following information

2009
Reprinting of Cheques-FCH7
Incase if sue to some reasons, a cheque needs to be reprinted the same can be done through tcode FCH7. Enter the
Company code, Bank and the cheque number that needs to be reprinted.
A spool request for printing the cheque also gets created that can be used for generating the cheque. Here there is an
option to print the same cheque or void the previous cheque and print a nee one in its place.
Automatic Payment Program- (F110)

2009
Prerequisite for Automatic Payment Program Vendor Master
We have to mention Pay methodsas C ascheque payments. Thisindicatesthat method selected will grouped at the
time of Automatic Payment Program.
In case of bulk printing of cheques, T. code F110 is to be used for the same. Enter the Run date and a unique Identification
for the same. The initial statusis No parametersentered.

2009
Go to the Parameters tab and specify the Company code, Payment method , next payment date and the Vendor range as
shown in the screen herein below..
Next payment date should be the next date of run date any future date
Select additional log tab
Go to Status TAB Again

2009
As we save the Screen shows the following Screen. Parameters Have been Created .
In the above screen click on proposal button .
In the above screen click on proposal button .

2009
Above screen select start immediately button and press enter.
Keep on press enter till we get the message Payment proposal hasbeen created
Click on edit proposal . System will propose following screen
Double click on the line item which we want to block or reallocate.

2009
If we want to block the respective document provide the A in payment block field
If we want to pay the amount which against document which is previously blocked click on reallocate button in the above
screen
As we select reallocate button another screen appears asking for house bank from which we want to make payments and
the payment method.
Once we select particular line item the colour turns blue and it is ready for the payment

2009
Provide the variant
Variant parameters

2009
Click on Print Out
In the above screen remove? mark give run id

2009
In the above screen select start immediate, Click on right button
Keep on press enter till we get the message Posting orders: 1 generated, 1 completed
Click on right button
For view the print go with SP01

2009

2009
Cash Journal (FBCJ)
Decide on the Company code in which the entry for Cash Journal needs to be made and specify the date of entry into the
Journal.
Incase if a Cash payment needsto be entered, goto the tab for Cash payments and select a businesstransaction for
Expenses or vendor payments.
Enter the amount of receipt and the GL account to which Debit posting has to be made. Incase of expenses, ensure that the
relevant Cost Center has been specified in the line item. Specify a text or narration wherever applicable and Post the entry.
An accounting document gets generated and the Cash balance now gets updated by the amount of payment entered.
Incase if multiple line items need to be entered in a single cash payment the icon for S
plit needsto be selected and
details entered therein.

2009
In case if a Receipt needsto be entered, go to the tab for Cash receipts and select a businesstransaction for Receipt.
Enter the amount of receipt and the GL account to which Credit posting has to be made. Specify a text or narration
wherever applicable and Post the entry. An accounting document gets generated and the Cash balance now gets updated
by the amount of receipt entered
Daily Balances of Cash A/c can be known from the side screen
For Printing Cash Journal
Click on

2009
Splitting of Cash Journal Entries
In case we want to have more than one line in single cash vouchers we can have split option. If we use another line in the
main screen it will create another document with separate Document Number. Split option will only generate one
document.
Create a Transaction
Click on to split/ multiple lines in the single voucher.

2009
Provide all the Details Like GL account Payment Amount, Cost Centre, Profit Centre, Click on copy
The Original Screen comes back and post the transaction click on
Once the Document is posted we can see the accounting entry posted click on
Click on Accounting Document following screen appears
If we require to print the Cash Payment / Receipt Voucher we can click on give the printer name

2009
Sample print file as below.
Cash Payment to Vendors/ Customers
As we can Pay Cash / Receive Cash for the General Ledger Accounts we van also receive/Pay cash to
Vendors and Customers

2009
Don t mention general ledger Account Code . Select Business Transaction type and Mention only Vendor / Customer Code.
If the Advance Payments are there the system will automatically take the special GL indicators and post to the Advance
Accounts.
We can view the Accounts Entry.

2009
Reversal of Cash Journal
If any mistake has happened or we need to reverse any transaction select the line item and click on delete button at the
bottom Corner following message will appear click on yes
and a new tab for Rason for Reversal Appears Give the reason and select the
and a new entry will be passed
with the Document Status As X

2009
Bank Reconciliation
Manual Bank Reconciliation process (FF67)
Integration
The graphic below gives an overview of the process for entering bank statements manually.
Procedure
To process the bank statement, proceed as follows:
1. Go through following navigation
2. On the next screen,
enter the following basic data:
Company Code
-- House Bank

2009
-- Account ID
Statement number and statement date
Beginning balance and ending balance
Posting Date
Fill the screen variant
If we want see the above screen again select menu
settings > specifications
3. Confirm the entries. On the next screen, we can process the bank statement data.
4. We have to select Transaction Type, Value Date, Amount Profit Centre, and Customer.
5. Note that Amount Entered and Bank Statement Amount at the Bottom should match, then only the system will
allow us to save .

2009
6. Choose Bank Statement - Save.
Click
The system displays the screen with the basic data again.
Again click on save button
System will generate bellow screen
View and rectify any errors in the Bank Statement (FEBAN)

2009
When we have the error system will show transaction will red indicator
For posting the transaction select the respective line item, select in the menu statement items - post
System will propose following screen

2009
In the above screen give the clearing account
Simulate and post.
Note: In general we have to upload the Data in Excel Sheet as per the required Format and then do the Reconciliation
Process. We will not be entering the entry by entry in the system.

2009
Uploading Manual Bank Statement through Excel ( ZFF67)
Being a customised application we have to go through T.Code. ( ZFF67). There is no navigation menu.
Select the Excel sheet where you have saved the Bank statement in the prescribed format
Give the range from Begin of Row to End of Row .
And Click on the Execute Button and the system will process the excel file and upload in the system.
FOLLOWING IS THE TEMPLATE FOR THE BANK RECONICILATION FILE UPLOAD
compa
ny
code
house
bank
account
id
statem
ent
number
statement
date
opening
balance
closing
balance
transac
tion
type
value date amount custo
mer
bank
reference
profit
center
allocati
on
1000 HDFC1 HDFC1 77 16.12.2008 11013253.00 11033253.00 C002 13.12.2008 10000 refer 1102001 allow
C002 13.12.2008 10000 refer 1102001 allow
Automatic Bank Reconciliation(FF.5)
If the Bank gives us the electronic Statement in MT 940 or Multi-Cash Format
In the above screen select second program for upload

2009
Fill the data as shown above and click on execute.
Entry Flow for CMS Collections
Collection entry from customer
211901Location bank inflow account Dr 10000
To customer 10000
Bank reco at region
211900Location main bank account Dr 8000
211901To location bank inflow account 8000

2009
Transfer entry from region FB50
200101Ho inflow bank account Dr 8000
211900To location main bank account 8000
Bank reco at HO
200100Ho main Dr 8000
200101To inflow ho 8000
For cheque bounce case
Region will receive bounce cheque FB70
Customer Dr 1000 (base line date should be the invoice date)
211902Region bank out flow account 1000
Bank statement from bank at region
211902Region bank out flow account Dr 1000
211900Region main bank account Cr 1000
Transferring the Values from region to main FB50
211900Region main bank account Dr 1000
211102Ho outflow account Cr

2009
Chapter 7
FIXED ASSETS
Asset procurement process:
Creation of material master (MM01)
Material Code example : -ASSETS
Click on select views button
Click on organizational levels button in the above screen

2009
Press enter

2009

2009
Save the material following message appears
Extension of Vendor Master ( XK01)
Press enter

2009
In vendor master CIN details fill the following values
Or we can go with J1ID

2009
For maintain excise details
Click on change button
Click on new entries button
Save.
Creation of internal order (KO01)

2009
System creates internally one CWIP asset for view the asset master go with T.Code:KO03

2009
Click on above selection
Asset no: 90000005
Budgeting Internal order (KO22)
Click on original budget

2009
Creation of purchase order (ME21N)

2009
we have to select accounting category as F because we are using Internal order for Assets
Procurement.

2009
Release Purchase order( ME29N)
Release the PO , Check whether the Realease Indicator is R

2009
Now the Purchase Order is released to the Vendor . We can receive the material so we can go for GR.
Goods Receipt ( MIGO )

2009

2009
Invoice verification (MIRO)

2009

2009
Settlement of internal order (KO88)
Remove the tick in test run check box
Execute
Click on for view accounting document

2009
Creation of asset master (AS01)
Or following navigation

2009
Take the asset class 3000 company code 1000 press enter

2009
For plant and machinery only need to fill shift factor
Double click on book depreciation line item for filling variable dep portion (this is required only for plant and
machinery)
Come back to previous screen
And click on tax depreciation line item
And provide the group asset number

2009
.
Settlement of CWIP to Main asset.(KO02)
For maintain settlement rule
Provide the wer order number
And click on enter

2009
Click on settlement rule button in the above screen .
Final settlement of CWIP to Main asset (KO88)
Remove the test run tick in above screen
Note : - Change Processing Type Automatic to Full Settlement
Click on execute button.

2009
Execute and we can view the following Accounting Entry.

2009
Depreciation Run ( AFAB)
We can use following navigation path
Execute the above tcode for posting the monthly depreciation for a Company code. Incase if a display is
required prior to posting the actual Depreciation, select the option of Test run and execute. Normally, the
radio button for Planned posting run will be used. However, if any changes Have been made to the
depreciation terms and depreciation needs to be recalculated then the option of Repeat run needs to be
selected. Due to this the Differential amount of depreciation now gets posted.

2009
Incase of no errors in the Depreciation run, the message for successful completion of the test run will be given as shown
above.
An update run for actual posting must always be executed as a Background job. The accounting entry then gets generated
else the batch input
Sessions needs to be run in the foreground and the error rectified.
After we are satisfied with the Results we can run in the Final Mode and Final Mode can only be run in the Background
Remove the test run in the above screen
Click on execute button
Select the back ground option as shown above

2009
Provide the out put device as LP01.
Press enter again press enter
Click on immediate button in the above screen
After click on save button .For view the job go with T.Code: SM37 or we can select in the following way

2009
Click on execute button in the above screen
Depreciation document
Document entry level
Ledger level

2009
Now we can go to AW01N - Asset Explorer and view the depreciation and other details
Asset sale with Customer F-92
Specify the Company code for which the Customer Invoice is being booked. Enter the Invoice number in the Reference field
as shown in the screen.

2009
Use posting key 50 and 390000 asset clearing account and transaction type 210 press enter
Enter the amount and the relevant Cost center to which the disposed asset belongs to. Next click on the small checkbox for
Asset retirement and click on enter.
Press enter

2009
The adjacent screen comes up wherein details of the asset that is to be disposed off needs to be entered. Click on the
option of Complete retirement if the whole asset isbeingdisposed off. Else Partial retirements, the amount or qty fields
can be specified.
Simulate the document and Post. Correct the highlighted lines before posting.
Save the Document
Asset sale without Customer - ABAON
Specify the Company code for which the asset disposal transaction is being posted. Enter the Asset value date and click on
the Simulate option.
S
elect Rev. From NBVradio button and put the value 01 and click on save button.
The entry that will be posted is displayed by the system.

2009
Display of AW01N for the asset now shows the retirement entries.

2009
Sales of Assets
Place the cursor on the Gain and Lossitem and click on Additional account assignment . Enter the Cost center and save
the transaction.
Display of AW01N for the asset now shows the disposal entries.
Assets Scrapping ( ABAVN)
A similar procedure is followed for Asset scrapping wherein transaction code ABAVN needs to be used.
Click on Simulate and check the entry and if OK we can save the Entry.
Asset transfer (ABUMN)
We can go with following navigation

2009
Provide the existing asset number Provide the dates Select new asset Radio button Click on master data
Provide the values as shown above and click on additional data button in the above screen Provide the required values and
Come back from the above screen And click on save button

2009
Asset Revaluation (ABAW)
Or go with following navigation
Provide the asset number which we want to revaluate provide the dates and Trasaction type R90.
Press enter

2009
.
For updating in FI go with T.code: AFAB
execute in back ground.

2009
Impairment of Asset (ABAA)
Or gowith following navigation
Use transaction type 650 for current year acquisition and 640 for previous year acquisition
Provide the asset number which we want to revaluate and put the document date and posting date
and transaction type.
Press enter

2009
Provide the depreciation value as shown above and save. System will post document in asset
accounting only
.
For updating in FI
Go with T.Code: AFAB

2009

2009
Chapter 8
COUNTRY INDIA VERSION
Withholding Tax
Configuration
with holding tax types at the time of invoice min.amount
GL
account
AI INV - SEC 194A - INT OTH THAN SECURITIES 150001
CI INV - SEC 194C - PAYMENT TO CONTRACTORS 150002
HI INV - SEC 194H - COMMISSION OR BROKERAGE 150003
II INV - SEC 194I - RENT 120000 150004
JI INV - SEC 194J PROF/TECHNICAL SERVICES 150005
FI INV - SEC 195 FOREIGN TRANSACTIONS 150006
WI INV - WCT
GI GTA - Service tax 150110
GE GTA - Cess 150120
GH GTA- Ecess 150130
T1 INV - Sec 206C TCS IT 150050
T2 INV - Sec 206C TCS SC 150051
T3 INV - Sec 206C TCS EC 150052
WITH HOLDING TAX TYPES AT THE TIME OF MAKING PAYMENT min.amount
AP PMT - SEC 194A - INT OTH THAN SECURITES
CP PMT - SEC 194C - PAYMENT TO CONTRACTORS
HP PMT - SEC 194H - COMMISSION OR BROKERAGE
IP PMT - SEC 194I - RENT 120000
JP PMT - SEC 194J PROF/TECHNICAL SERVICES
FP PMT - SEC 195 FOREIGN TRANSACTIONS
WITH
TYPE WITH CODE DISCRIPTION TAX RATE
AI A1 INV - Sec 194A -Non Corporate < 10 lac 10.3
AI A2 INV - Sec 194A -Non Corporate > 10 lac 11.33
AI A3 INV - Sec 194A - Companies <1 Crores 20.6
AI A4 INV - Sec 194A - Companies >1 Crores 22.66
AP AA PAY - Sec 194A -Non Corporate < 10 lac 10.3
AP AB PAY - Sec 194A -Non Corporate > 10 lac 11.33
AP AC PAY - Sec 194A - Companies <1 Crores 20.6
AP AD PAY - Sec 194A - Companies >1 Crores 22.66
CI C1 INV - Sec194C-Contractor < 2.06
CI C2 INV - Sec194C-Contractor > 2.266
CI C3 INV - Sec194C - ADV,SCON < 1.03
CI
C4 INV - Sec194C- ADV, SCON > 1.133

2009
CP CA PAY - Sec194C-Contractor < 2.06
CP CB PAY - Sec194C-Contractor > 2.266
CP CC PAY - Sec194C - ADV,SCON < 1.03
CP CD PAY - Sec194C- ADV, SCON > 1.133
HI H1 INV - Sec 194H - Bork&Comm < 10.3
HI H2 INV - Sec 194H - Bork&Comm > 11.33
HP HA PAY - Sec 194H - Bork&Comm < 10.3
HP HB PAY - Sec 194H - Bork&Comm > 11.33
II I1 INV - Sec 194I-Plant/Mac/Equp< 10.3
II I2 INV - Sec 194I-Plant/Mach > 11.33
II I3 INV - Sec 194I-Ind/HUF-Land/Bldg/Furn <10L 15.45
II I4 INV - Sec 194I-Ind/HUF-Land/Bldg/Furn >10L 16.995
II I5 INV - Sec 194I-Firm/Com-Land/Bldg/Furn<1Cr 20.6
II I6 INV - Sec 194I-Firm/Com-Land/Bldg/Furn>1Cr 22.66
IP IA PAY-Sec 194I-Plant/Mac/Equp< 10.3
IP IB PAY-Sec 194I-Plant/Mach > 11.33
IP IC PAY-Sec 194I-Ind/HUF-Land/Bldg/Furn <10L 15.45
IP ID PAY-Sec 194I-Ind/HUF-Land/Bldg/Furn >10L 16.995
IP IE PAY-Sec 194I-Firm/Com-Land/Bldg/Furn<1Cr 20.6
IP IF PAY-Sec 194I-Firm/Com-Land/Bldg/Furn>1Cr 22.66
JI J1 INV - Sec 194J - < 10.3
JI J2 INV - Sec 194J - > 11.33
JP JA PAY - Sec 194J - < 10.3
JP JB PAY- Sec 194J - > 11.33
FI F1 INV - Sec 195 Royalty < 10.3
FP FA PAY - Sec 195 Royalty < 10.3
T1 T1 INV - Sec 206C TCS IT 1
T2 T2 INV - Sec 206C TCS SC 10.00%
T3 T3 INV - Sec 206C TCS EC 3.00%
W1 W1 INV - WCT 12.50%
GI G1 GTA 3.00%
GE G1 GTA-Surcharge .06%
GH G1 GTA-Cess .03%
Maintain the TDS codes in the vendor master in TDS tab.
Down payment to vendor
Go with T.Code: F-48

2009
Or go with following navigation
Provide the values as shown above press enter

2009
In the above screen Business Place and Section Code fields need to be filled. As the TDS Reports are based on the Business
Place. Business Place has been defined based on the TAN Number.
Press enter
System will propose following screen
Press enter

2009
Simulate and save.
At the time of invoice booking system will provide information relation to advance user need to reduce the advance
amount out of invoice value and need to put that amount and user need to remove the withholding tax type at time of
payment as shown bellow screen.

2009
Create Remittance Challan (J1INCHLN)
Go with following navigation
All line items that have been posted to the TDS Payable account will get displayed. Select all and go to Document overview.
Provide the values as shown bellow

2009
Click and execute button and press enter
In the above screen select charge of deff button .

2009
Double click on line item in the above screen
Remove 1/- put * click on process open item button, simulate

2009
Save.
Tip: - In general the TDS line items will be in the non selected mode as we have to select many line items for making the
TDSpaymentswe can go for AccountingEditing Options - T.Code: FB00
Click on open items tab as shown below, and select check box Select Item InitiallyInactive as shown below
And save
As we save it all the line in the TDS Payments will be in the selected mode (Blue Colour) and in case we want to deselect
any line item by double clicking on it we can de-select the particular line.
S
pecify the Recipient type i.e Corporate and Non Corporate , we cannot run both at the same time. This session again
needs to be executed separately for Companies and Others.

2009
S
pecify the Bank account through which the payment is being made and click on Execute. Note that in any kind of
payment, always the Bank clearing account needs to be selected.
System will shown following screen for challan.
Enter Bank Challan Updation (J1INBANK)

2009
Provide values as shown above and click on execute button
Certificate print ( J1INCERT)
Following navigation

2009
Provide the values as shown above. click on execute button. System propose following screen
Click on print preview button

2009
Reprint TDS Certificate (J1INCCREP)
Quarterly Return (J1INQEFILE)

2009
TDS REPORTS
Execute transaction code J1INMIS with the details as shown in the adjacent screen. Normally the date should be for a
quarter for which TDS returns need to be filed. Executing the session will give a display of all Invoices covered under the
entered section code. Select All and Execute again.
TDS for Concessional Rate of Tax

2009
Setups for enabling TDS at lower Rates
We have to go to Vendor Master ( FK02/XK02) select the withholding TAB and go to the screen as follows
Here we have to mention the % for Reduction of TDS
Example: -
Suppose the TDS rate is 10%
He has got the concession Certificate of 2%
Hence he has got the rebate of 80% from the original Rate of TDS
So mention the 80% in the Rate % Column ( Note :- Don t Put Concessional Rate of TDSi.e 2%)
Now do the Normal Invoicing or the Payment the system will deduct the TDS and the reduced rates

2009
Service Tax
Creation of Tax code (FTXP)
Provide the country in the bellow screen
Tax code should be the two digit code
Press enter provide the values as shown bellow ( V for input tax, A for out put tax)
ATax Code KJ hasbeen created. The nature of Tax Type is V asit isInput Tax . AsS
ervice Tax hasa concept of
movement of Amount of from Interim A/c to Final A/c .
SO we have defined for Example Purpose KJ as Interim Account and KK as Final Account.

2009
Press enter
No need to maintain any thing in the above screen, click on save button.
For Final Service Tax Code

2009
For maintain the %ratesfor each component of tax need to go with T.Code: FV11 , for service tax we have to use JS
RT
condition type and SMX1 for service tax Base ..
Provided the condition which we want to maintain
Press enter

2009
After creation each tax code for input we need to assign to company code.
In SPRO- logistic general-tax on goods movement
In Expenses General Ledger Account need to put ( ) sign and (+ ) sign for income GL. Or put * capturing both tax codes.
Following are the Various Material Tax Codes are created in SAP System

2008
Tax code Description
JMX
1
JMO
P
JEX
1
JEC
1
JHX
1
JSE
1 JVRD SMX1
JSR
T
JEC
3
JSE
3
JMX
2
JMI
P
JEX
2
JEC
2
JHX
2
JSE
2
JVR
N JIPC
IN:
A/P
BED
setof
f
IN:
BED
setoff
%
IN:
A/P
ECS
seto
ff
A/P
Ece
ss
for
Seto
ff
IN:
A/P
SEC
es
setof
f
A/P
SEC
ess
Seto
ff VAT
Servic
e Tax
base
servi
ce
tax cess
eces
s
A/P
BED
inve
ntor
BED
inve
ntor
y %
A/P
ECS
inve
nt.
A/P
ECS
Inve
nt.
A/P
SCS
inve
nt.
A/P
SCS
Inve
nt.
VAT
INV CST
ED CENVATABLE + CST
INVENTORISED
1A ED(10+2+1)CST-INV(2) 100 10 100 2 100 1 2
1B ED(10+2+1)CST-INV(1) 100 10 100 2 100 1 1
1C ED(10+2+1)CST-INV(0) 100 10 100 2 100 1
1D ED(4+2+1)CST-INV(2) 100 4 100 2 100 1 2
1E ED(4+2+1)CST-INV(1) 100 4 100 2 100 1 1
1F ED(4+2+1)CST-INV(0) 100 4 100 2 100 1
1G ED(0)CST-INV(2) 2
1H ED(0)CST-INV(1) 1
1I ED(0)CST-INV(0)
1J ED(INCL)CST-INV(2) 100 0 100 2 100 1 2
1K ED(INCL)CST-INV(1) 100 0 100 2 100 1 1
ED CENVATABLE + VAT
INVENTORISED
2A ED(10+2+1)VAT-INV(4) 100 10 100 2 100 1 4
2B ED(10+2+1)VAT-INV(8) 100 10 100 2 100 1 8
2C ED(10+2+1)VAT-INV(12.50) 100 10 100 2 100 1 12.5
2D ED(4+2+1)VAT-INV(4) 100 4 100 2 100 1 4
2E ED(4+2+1)VAT-INV(8) 100 4 100 2 100 1 8
2F ED(4+2+1)VAT-INV(12.50) 100 4 100 2 100 1 12.5
2G ED(0)VAT-INV(4) 4
2H ED(0)VAT-INV(8) 8
2I ED(0)VAT-INV(12.50) 12.5
ED CENVATABLE + VAT

2009
CENVATABLE
3A ED(10+2+1)VAT(4) 100 10 100 2 100 1 4
3B ED(10+2+1)VAT(8) 100 10 100 2 100 1 8
3C ED(10+2+1)VAT(12.50) 100 10 100 2 100 1 12.5
3D ED(4+2+1)VAT(4) 100 4 100 2 100 1 4
3E ED(4+2+1)VAT(8) 100 4 100 2 100 1 8
3F ED(4+2+1)VAT(12.50) 100 4 100 2 100 1 12.5
3G ED(0)VAT(4) 4
3H ED(0)VAT(8) 8
3I ED(0)VAT(12.50) 12.5
3J ED(INCL)VAT(4) 100 0 100 2 100 1 4
3K ED(INCL)VAT(8) 100 0 100 2 100 1 8
3L ED(INCL)VAT(12.50) 100 0 100 2 100 1 12.5
ED INVENTORISED + CST
INVENTORISED
4A ED-INV(10+2+1)CST-INV(2) 100 10 100 2 100 1 2
4B ED-INV(10+2+1)CST-INV(1) 100 10 100 2 100 1 1
4C ED-INV(10+2+1)CST-INV(0) 100 10 100 2 100 1
4D ED-INV(4+2+1)CST-INV(2) 100 4 100 2 100 1 2
4E ED-INV(4+2+1)CST-INV(1) 100 4 100 2 100 1 1
4F ED-INV(4+2+1)CST-INV(0) 100 4 100 2 100 1
4G ED-INV(0)CST-INV(2) 2
4H ED-INV(0)CST-INV(1) 1
ED INVENTORISED + VAT
INVENTORISED
5A
ED-INV-INV(10+2+1)VAT-
INV(4) 100 10 100 2 100 1 4
5B ED-INV(10+2+1)VAT-INV(8) 100 10 100 2 100 1 8
5C
ED-INV(10+2+1)VAT-
INV(12.50) 100 10 100 2 100 1 12.5
5D ED-INV(4+2+1)VAT-INV(4) 100 4 100 2 100 1 4
5E ED-INV(4+2+1)VAT-INV(8) 100 4 100 2 100 1 8
5F
ED-INV(4+2+1)VAT-
INV(12.50) 100 4 100 2 100 1 12.5

2009
5G ED-INV(0)VAT-INV(4) 4
5H ED-INV(0)VAT-INV(8) 8
5I ED-INV(0)VAT-INV(12.50) 12.5
5J ED-INV(INCL)VAT-INV(4) 100 0 100 2 100 1 4
5K ED-INV(INCL)VAT-INV(8) 100 0 100 2 100 1 8
5L
ED-INV(INCL)VAT-
INV(12.50) 100 0 100 2 100 1 12.5
5M
ED-INV(INCL)VAT-
INV(21.43) 100 0 100 2 100 1
21.4
3
NORMAL SERVICE TAX
01 1110-SER(12+2+1) INT 100 12 2 1
02 1110-SER(12+2+1) FIN 100 12 2 1
03 1120-SER(12+2+1)-INT 100 12 2 1
04 1120-SER(12+2+1)-FIN 100 12 2 1
05 1210-SER(12+2+1)-INT 100 12 2 1
06 1210-SER(12+2+1)-FIN 100 12 2 1
07 1310-SER(12+2+1)-INT 100 12 2 1
08 1310-SER(12+2+1)-FIN 100 12 2 1
09 1320-SER(12+2+1)-INT 100 12 2 1
10 1320-SER(12+2+1)-FIN 100 12 2 1
11 1330-SER(12+2+1)-INT 100 12 2 1
12 1330-SER(12+2+1)-FIN 100 12 2 1
13 1340-SER(12+2+1)-INT 100 12 2 1
14 1340-SER(12+2+1)-FIN 100 12 2 1
15 1350-SER(12+2+1)-INT 100 12 2 1
16 1350-SER(12+2+1)-FIN 100 12 2 1
17 1410-SER(12+2+1)-INT 100 12 2 1
18 1410-SER(12+2+1)-FIN 100 12 2 1
19 1420-SER(12+2+1)-INT 100 12 2 1
20 1420-SER(12+2+1)-FIN 100 12 2 1
21 1430-SER(12+2+1)-INT 100 12 2 1
22 1430-SER(12+2+1)-FIN 100 12 2 1

2009
23 1440-SER(12+2+1)-INT 100 12 2 1
24 1440-SER(12+2+1)-FIN 100 12 2 1
25 2110-SER(12+2+1)-INT 100 12 2 1
26 2110-SER(12+2+1)-FIN 100 12 2 1
27 2120-SER(12+2+1)-INT 100 12 2 1
28 2120-SER(12+2+1)-FIN 100 12 2 1
29 2130-SER(12+2+1)-INT 100 12 2 1
30 2130-SER(12+2+1)-FIN 100 12 2 1
31 2140-SER(12+2+1)-INT 100 12 2 1
32 2140-SER(12+2+1)-FIN 100 12 2 1
33 2160-SER(12+2+1)-INT 100 12 2 1
34 2160-SER(12+2+1)-FIN 100 12 2 1
35 2161-SER(12+2+1)-INT 100 12 2 1
36 2161-SER(12+2+1)-FIN 100 12 2 1
37 HO-SER(12+2+1)-INT 100 12 2 1
38 HO-SER(12+2+1)-FIN 100 12 2 1
39 WR-SER(12+2+1)-INT 100 12 2 1
40 WR-SER(12+2+1)-FIN 100 12 2 1
41 ER-SER(12+2+1)-INT 100 12 2 1
42 ER-SER(12+2+1)-FIN 100 12 2 1
43 SR-SER(12+2+1)-INT 100 12 2 1
44 SR-SER(12+2+1)-FIN 100 12 2 1
45 NR-SER(12+2+1)-INT 100 12 2 1
46 NR-SER(12+2+1)-FIN 100 12 2 1
GTA SERVICE TAX
9A 1110-SER-GTA(12+2+1) 25 12 2 1
9B 1120-SER-GTA(12+2+1) 25 12 2 1
9C 1210-SER-GTA(12+2+1) 25 12 2 1
9D 1310-SER-GTA(12+2+1) 25 12 2 1
9E 1320-SER-GTA(12+2+1) 25 12 2 1
9F 1330-SER-GTA(12+2+1) 25 12 2 1

2009
9G 1340-SER-GTA(12+2+1) 25 12 2 1
9H 1350-SER-GTA(12+2+1) 25 12 2 1
9I 1410-SER-GTA(12+2+1) 25 12 2 1
9J 1420-SER-GTA(12+2+1) 25 12 2 1
9K 1430-SER-GTA(12+2+1) 25 12 2 1
9L 1440-SER-GTA(12+2+1) 25 12 2 1
9M 2110-SER-GTA(12+2+1) 25 12 2 1
9N 2120-SER-GTA(12+2+1) 25 12 2 1
9O 2130-SER-GTA(12+2+1) 25 12 2 1
9P 2140-SER-GTA(12+2+1) 25 12 2 1
9Q 2160-SER-GTA(12+2+1) 25 12 2 1
9R 2161-SER-GTA(12+2+1) 25 12 2 1
9S HO-SER-GTA(12+2+1) 25 12 2 1
9T WR-SER-GTA(12+2+1) 25 12 2 1
9U ER-SER-GTA(12+2+1) 25 12 2 1
9V SR-SER-GTA(12+2+1) 25 12 2 1
9W NR-SER-GTA(12+2+1) 25 12 2 1

2008
Service tax process
Pass entry by using Tax code: KJ as shown in General Ledger Below
Data Entry View .
Note: While entering the Invoice the Gross Amount ( Including Service Tax )
Initially the service tax amount is posted in the Interim A/c ( Modvat Service Tax to be claimed ) and only after the payment
to the Vendor is made it can be transferred to the Final Service Tax Modvat Account
Check the payment is made before the Service Tax Credit is taken and adjusted with the Excise.
Make the payment against invoice as shown below (F-53) / (F-58)

2009
For Transferring Interim Service Tax Amount to Final Service Tax Amount ZST01( or we can go to SE38 and provide the
table RFUMS
V50
Fill the values as shown bellow

2009
Note:- by default the screen shows Do Not Update change the radio button to Update Document :Update Run

2009
In Posting Parameters Transfer Posting and provide the Session Name and Document type which we want to use for
final posting from interim.
In Currency Translation select Transfer Posting Date
Or System can provide the following warning screen
Ignore the warning press enter
For Viewing Batch Output ( SM35)

2009
Select the session click on process button .
Click on process button

2009
Go on pressing enter till all the entries are posted and the system comes to main screen .

2009
Excise Duty
Go for the T.Code J1ILN the SAP menu appears as follows

2009
Maintaining of Excise Master Data (J1ID)
For maintaining excise Rate maintenance go to J1ID
Following screen appears we can maintain various master Data here. We can maintain vendor and customer excise details,
item tariff heading and excise rates.

2009
Excise JV (J1IH)
Use the following Navigation path
There are many types of Excise JV we can pass in the system
Making Adjustment Postings for Scrap (Material Write-off)
MB1A
Use
We can follow this procedure if we have scrapped a material and want to reverse the excise duty debited to our
CENVAT account.
Procedure
1. From the SAP Easy Access screen, choose Indirect Taxes Excise JV Create Matl write-off.

2009

2009
2. Enter data as required, including:
o Document number
Enter the number of the document that you used to scrap the material.
3. Choose .
The system displays the information from the material document.
4. Adjust the posting date as necessary.
5. Adjust the excise duty for each line item either:
o Manually
o By assigning the line item to an excise invoice
6. Specify which G/L accounts are to be posted to.
7. Save the adjustment posting.
MB1A

2009
Go to MB03 for material document display
Press enter

2009
Select Accounting Document for seeing the Accounting document.
Making Adjustment Postings for Materials Not Used in Production
Use
We follow this procedure if we have not used a material in the production process and want to reverse the excise
duty debited to our CENVAT account.
Procedure
1. From the SAP Easy Access screen, choose Indirect Taxes Excise JV Create Matl non-prod.
o Document number
Enter the number of the material document that the adjustment posting is to refer to.
3. Choose .
5. Adjust the excise duty for each line item either:
o Manually

2009
o By assigning the line item to an excise invoice
Making Adjustment Postings for Additional Excise Paid by Vendors
Use
We follow this procedure if a vendor has increased the amount of excise duty that it originally charged we and
we want to debit the difference to your CENVAT account.
Procedure
1. From the SAP Easy Access screen, choose Indirect Taxes Excise JV Create Additional excise.
2. Enter data as required.
In the Document number field, enter then number of the document sent to you by the vendor.

2009
3. Choose .
5. Enter the amount of excise duty in either of the following ways:
o To enter line items for different materials and the excise duty accordingly, choose and
enter the line items in the table.
o To enter the excise duty only, choose and enter the excise duty in the totals fields at the
foot of the screen.
6. If the duty qualifies as countervailing duty (CVD):
a. Select CVD applicable.
b. Enter the CVD amount in the BED amount field.
For inventory adjustment use T.Code MB1A and rest same as above

2009
Making Adjustment Postings for Money Transferred to PLA
Use
We follow this procedure to make an adjustment posting when we transfer money to your personal ledger
account (PLA).
Prerequisites
We have already transferred the money to our PLA at the bank, using a TR6 challan, and have posted the
corresponding accounting document.
Procedure
1. From the SAP Easy Access screen, choose Indirect Taxes Excise JV Create TR6 challan.
2. Enter data as required, including the document number.
We can enter either the challan number or the number of the accounting document.
3. Choose .
If we entered the accounting document number, the system displays the information from it.
4. Enter the amounts against the accounts that you require.
Canceling Excise Invoices
Use
We follow this procedure in order to cancel an outgoing excise invoice. It reverses any excise duty accounted
for.
Procedure
1. From the SAP Easy Access screen, choose Indirect Taxes Excise JV Create Cancel exc. inv.
or Indirect Taxes Sales and Outbound Movements Excise Invoice Create/Change/Display .
2. Enter the number, year, and series group of the excise invoice that you want to cancel.
A dialog box appears.
3. Choose Yes.

2009
Making Adjustment Postings for Other Transactions
Use
We follow this procedure if we want to make an adjustment posting that does not fall into any of the other
categories of adjustment offered by this function. we can only use an external document as our reference
document.
Procedure
1. From the SAP Easy Access screen, choose Indirect Taxes Excise JV Create Other adj.
o Document number
Enter the number of the external document that you want to refer to.
o CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. If the posting does not have
to be remitted immediately, select Fortnightly payment.
3. Choose .
5. Enter the amount of excise duty in either of the following ways:
o To enter line items for different materials and the excise duty accordingly, choose and
enter the line items in the table.
o To enter the excise duty only, choose and enter the excise duty in the totals fields at the
foot of the screen.

2009
CENVAT Register (J2I9)
For viewing the cenvat register we can use T.Code J2I9
Provide the company code , Excise Group of which we want to take the Cenvat Register . Provide the Date range for which
we want to limit the report.
We can take the detail and Abstract for Input Materials and Capital Materials and execute the report.
For Abstract Report

2009
For the Detail report
The File exported to Excel appears as follows
Detail
Display
Sort in
ascending
order
Sort in
ascending
order
Total Export to
Excel Local
File
ABC Analysis
Filter Sub
total
Word
processing
Send
Mail
Change Layout

2009

2009
For seeing details transaction wise click on the desired line and then click display icon. Following screen appears.

2009
Excise Register Extraction (J2I5)
Print Excise Register (J2I6)
For Excise Register Prints we have to run two reports
1. For Extraction and
2. For Printing the Extracted Report.
We can select any one or all the register at a time.
(J2I5) Execute the program.
J2I6 (Print Registers)
Select the desired registers and click on execute.

2009
Provide the details. As we click on the execute button a popup appears for the file name and
location for saving the output.
EXCEL FILE OPENS AS FOLLOWS
SAP has provided various macros to get the report in the proper format. which we can apply to the
report and get the formatted report.

2009
Monthly Utilisation of Cenvat Credit and Payment from PLA (J2IUN)
Or go as per the following navigation.
Provide the detailsasCompany Code, Plant, Excise Group, and Period -From Date to Date
Before processing the Utilisation we can check the Last Utilisation Date and View the Pending Invoices to Cleared by
clicking on the Following buttons

2009
Click on the Execute Button
Select the Duty and Click on Select duty an then enter the utilised amount and check that indicators turn green.
Select the other Duty and utilise the amount. Once all the Duty Type is utilised save icon is active. Now we can save the
utilisation and the following entries are generated.

2009
Capital Goods Excise
Sale of Capital Goods in the Year of Purchase
If the Capital Goods are sold in the year of purchase then we have to take 100% credit in the year of purchase despite of
normal 50% credit in the year of purchase and balance 50 % credit in the subsequent year.
S
elect the desired capital either on the vendor basisor the entry number basisand click on the Transfer Credit Tab the
entry number and the Accounting entry will be generated and the full credit will be availed.

2009
Credit on Hold is credited and the RG23C excise duty is debited back.
For Claiming Balance 50% Cenvat Credit on Assets in the Next Accounting Year
Do the Same Process and Select the all the entries for the Previous Accounting Year and on the on the First Day of the
Succeeding Year Transfer the Credit.
ER 1 Register (J2IER1)

2009
Output format for the ER 1 Register
Mention the GL Code
of Service Tax Credit
Provide the Excise
Group
Provide the Plant
Select the Details one
by one to get the out
put

2009

2009
Sales Tax
Form Tracking
Use
You use this function to record and monitor forms relating to tax concessions. You can record the forms that your
customers send you against their sales orders, and those that you send to your vendors against your purchase orders.
You can also use these functions for monitoring other routine activities, for example, when you transfer money to your
personal ledger account (PLA) using a TR6 challan.
Features
Forms for concessional sales tax must be submitted by the buyer after the goods have been delivered or after it has paid
the invoice. In the case of interstate concessional sales tax rate sales, the concessional rate is granted against the issue of
C-forms.
Exemption from excise duty may be granted by the excise authorities under certain circumstances, for example, on exports
or deemed exports. In such cases, the buyer has to produce certain statutory forms to claim concessional rates of excise
duty or exemptions. The exporter has to provide the vendor with proof of export (form AR3A).
If the buyer is unable to furnish the certificate at the appropriate time, material supply should be at the normal rate of
sales tax or excise duty.
Activities
To access the form tracking function, from the SAP Easy Access screen, choose Indirect Taxes Forms Tracking
Create/Change/Display.

2009
Chapter 9
Purchase Order
Material Management (MM) Integration.
Material Creation Display( MM03)
In Greaves Cotton ltd, we have many materials that we will not always know whether a specific material already exists in
the material master. We can find this out using the materials list. This function allows we to list materials according to one
or more of the following selection criteria:
Material number
Plant
Material type
Material group
Person who created the material
Features:
Besides the data we enter on the selection screen, the materials list also contains other useful data such as the material
description, base unit of measure, price control indicator, price unit, and valuation price.
Click Select View(s) or Press enter, below screen will be displayed

2009
Press Select All button to view all the fields for the given material code.
Or Select those relevant to our use. Once we select and click the RIGHT button, below screen will shown
Press Enter or Click the RIGHT button.
Below Screen will be display where TABS will be seen as per our selection above.
Browse through TABS for information about the material.
Some Important TABS for finance are Foreign Trade Import, Plant Data/ Stor. 2, Accounting 1 and Accounting 2

2009
Here we need to fill the Chapter ID & Excise details.

2009
Profit center field need to be filled in the Plant Data / Stor 2 tab.
Valuation class for determining GL accounts for goods movements as highlighted in the above screen.
For all the Materials Price control should be V (moving average).
Till this Section Material Master INFORMATION must be Verified, before moving to the transaction for the
Material.

2009
Purchase Order: GR IR: Goods Receipt Invoice Receipt.
The accounting data for a material is managed at company code level or plant level.
For view the individual purchase order
Go with T.Code: ME23N
Click on document overview on button in the bellow screen .
Select the purchase order following way

2009
We will get the list of purchase orders as shown bellow
In the above screen select the Purchase Order which we need to view. In the above screen 4500000044 PO is
selected. To select a PO just double click on that PO number.
As in the above screen we can view various information about the Purchase Order by choosing the relevant tab.
below is the Conditions TAB displayed.

2009
In the below screen we can see the Purchase Order History.
Click on Material Do. in the 105 movement document line in the above screen
Then the below screen will appear

2009
In the above screen select the DOC. INFO tab
Click on FI document button in the above screen

2009
If we select , we can see the GL view
Come back to previous screen
Click on excise invoice tab

2009
In the above screen click on more data button .

2009
Click the Number in the Accounting column in the above screen.
Excise entry can be seen as above.
Invoice verification(MIRO)
Enter the Invoice Date & relevant Business Place.
Put the cursor in the purchase order field as shown above and use F4 function.

2009
Provide our vendor as shown above click on execute button
In the above screen select the respective purchase order click on copy button.
Press enter, below screen will appear.

2009
Select Calculate Tax option box, and give the relevant Tax Type as in the below screen.
We need to ensure that the Balance is 0 and this must be green.
Click on simulate button
Purchase order report.
Go with T.Code: ME2N.

2009
Reversal of MIRO (MR8M)
Invoice documents in Invoice Verification are either invoices or credit memos. These documents can be cancelled.
There are two different cases:
If an invoice is cancelled, the system automatically creates a credit memo.
If a credit memo is cancelled, the system automatically creates an invoice.
The system takes the amount and quantity for the credit memo or invoice from the invoice or credit memo to be
cancelled, thus avoiding any differences between the invoice and the credit memo or the credit memo and the
invoice.
Provide the Invoice Document No ********* created at MIRO and Fiscal Year
Provide the Reversal Reason and the Posting Date
Click on
to view the MIRO and the follow on Accounting Documents .

2009
Prerequisites
An invoice document can only be cancelled if:
it was posted in Logistics Invoice Verification
It has not already been cancelled
It is not a cancellation document for another document
When we cancel documents in Logistics Invoice Verification, the document line items are not automatically
cleared in Financial Accounting. It is recommend that we periodically clear such items (using daily background
jobs, for example).
Procedure
To cancel an invoice document, proceed as follows:
1. Choose Logistics Invoice Verification -> Further Processing -> Cancel Invoice Document.
The initial screen for reversal appears.
2. In the fields Invoice doc. number and Fiscal year, enter the data for the invoice document you want to
cancel.
3. In the Reversal reason field, select the reason for cancelling the invoice. This allows you to differentiate
between different types of cancellations.
We can display the document to check. Choose Display document to do this. We can look at the items of
the document to be cancelled. Return to the initial screen by choosing back.
4. Choose Invoice document ->Post reversal doc

2009
Click on Save button on the screen of MR8M
Following message will appear
Result
The system automatically posts a credit memo or invoice. You receive a message.
The system checks an invoice created as a result of cancelling a credit memo for variances. If variances
occur, the invoice may be blocked for payment. If it is, a message appears.
When you cancel an invoice or a credit memo, the system creates an invoice or a credit memo from
information contained in the document to be cancelled. In the simplest form, the postings in the invoice
or credit memo are simply reversed.
However, this is not always possible. If, for example, an invoice is cancelled in which a material was
debited, the postings can only be reversed if there is enough stock when the invoice reversal is posted. If
there is not enough stock, the reversal posting is made proportionally: the part for which there is
sufficient stock coverage is posted to the stock account, the remainder to a price difference account.
When you cancel an invoice or credit memo referencing a purchase order, you cannot reverse the
account movements originally made if a further invoice with a different price was posted after the
invoice that is to be cancelled.
Release Blocked Invoices (MRBR)
Purpose
Before you can pay a blocked invoice, you must release it in a separate step. You do so by cancelling the blocking
indicator that was set when the invoice was posted.
Since the total invoice amount is to be paid and not individual invoice items, the blocking indicator is set in the
vendor line of the accounting document. As a result, all the items in an invoice can only be released at the same
time.
To specify when exactly an invoice is to be paid, you agree terms of payments with the vendor. These terms of
payment contain the baseline date from which your cash discount period applies. If an invoice was blocked for
payment for a long time, your cash discount deadline could expire. If you release this invoice, you can select the
field Move cash discount date on the initial screen of the invoice release transaction and retain the agreed cash
discount.

2009
Releasing Invoices
Use
When we release an invoice, the system reverses the blocking indicator in the accounting document for the
invoice. In the vendor line, the R in the field Payment block is deleted.
We can release invoices while processing a blocked invoice. This is useful in the following cases:
An invoice contains several blocking reasons. We have to investigate the reason for the block and resolved it. The
blocking reasons are no longer valid; therefore we can release the invoice.
One employee is responsible for releasing invoices in your company. Your system administrator can assign the
appropriate authorization.
If you have selected the field Move cash discount date, the agreed cash discount period is retained.
Procedure
1. Choose Logistics Invoice Verification -> Further Processing Release Invoices.
The selection screen for releasing invoices appears.

2009
2. Enter data as required. In the Processing screen area, select the field Release manually.
3. In the Blocking procedure screen area, select a procedure.
Blocked due to variances
Manual payment block
Stochastically blocked
If we manually set a payment block in the document header when entering the invoice and one of the invoice
items contains blocking reasons, this invoice is not displayed in the blocking procedure Manual payment block,
instead it is displayed in the blocking procedure Blocked due to variances.
4. Choose Execute.
The system issues a list of blocked invoices that meet the criteria entered.
5. Select the invoice document that you want to release.
The system automatically selects all other items in the invoice since you cannot release individual items.
6. Choose Release invoice.
Check your entries.
7. Choose Save changes.
The invoices selected are only released for payment when you save them.
Result

2009
The system releases the invoice. The following message appears:
If you want to release invoices that have price blocks at item level and a manual block at header level, the system
outputs the message:
nn invoices released, n still contain a manual block.
Reselect the invoices containing manual blocks using Manual Payment Block and Release Manually. Release the
relevant invoices manually.

2009
Chapter 10
Sales & Distribution
Process
For Comparison of Master Data from Sales & Distribution to Finance Accounting (OV50)
As a Finance Person we have to check whether all the information at the time of creation of Customer Master has been
properly updated in the Masters.
For integration between Sales and Distribution module Reconciliation A/c is must to be maintained at the time of Master
Creation. In Case person creating Customer Master forgets to put Reconciliation A/c . We can use the following application
to compare and finds out the accounts where recon A/c is missing.
Navigation is as follows

2009
We can have either Selection Parameters -
Click on Execute
Display Sales Order ( FV03)
Logistics Sales and Distribution Sales Order Dispaly

2009
Press Enter
Display the billing document (VF03)
Press Enter

2009
Click on button to view the Accounting document
Creation of excise invoice (J1IIN)
Indirect Taxes Sales or Outbound movement Excise Invoice Outgoing excise Create/change/display
Purpose
This transaction is used for creating excise invoice with reference to a billing document.
Prerequisite
The excise invoice has to be created with reference to a billing document
The billing document has to be released to FI
The posting date of the billing document

2009
Enter the billing document number and posting date and press Enter
Enter the Billing Document and press enter
The Invoice appears and if everything found correct. Click on Get Excise Invoice.
Click on the Get Excise Invoice .
After the Invoice had been generated we can view the details .

2009
Customer Analysis (FD11)
We can view the Customer analysis in various ways which are as follows

2009

2009
Chapter 11
Reversals & Editing Documents
Reset and Reversal of Documents (FBRA)
Incase if a document cannot be reversed through FB08 because of Clearing reasons, it can be Reset and optionally reversed
through FBRA. The original document then getsan Open status.
FBRA is available in GL, AR, and AP menu following is the navigation path
For general reversal following message appears.
We have two options either we can click on the Only clearing tab . It will not reverse the document but only open the
document for re- matching.
If we click on Resetting and Revers the matched document will be open and also get reversed . S
O we have to again
enter a new document or match with other document.
In case of clearing document related to Withholding Tax following message
appears

2009
Transfer Posting with Clearing (F-04)
Transfer posting can normally be used during Bank Reconciliation for transferring the balance from the Clearing account to
the Main Bank account.
In the initial line enter the account where the amounts need to be transferred and in the following screen choose the
option of Processopen items

2009
S
pecify the account code that needs to be cleared and click on Enter. All line items already posted to the relevant account
now getsdisplayed. By Double clicking on the same, it getsselected and cleared. Note that the valuesin Amount entered
and Assigned needsto match in order that the document can get posted.

2009
Simulate the entry and Post the same.

2009
Chapter 12
Reports & Balances
Report Code Description
FBL1/ FBL1N/ FBL2 / FBL2N DISPLAY Vendor Line Item
FBL3 /FBL3N/ FBL4/FBL4N DISPLAY GL Line Item
FBL5 /FBL5N/ FBL6/FBL6N DISPLAY Customer Line Item
FS10N DISPLAY General Ledger Balances
FK10N DISPLAY Vendor Ledger Balances
FD10N DISPLAY Customer Ledger Balances
FB03 DISPLAY Document Listing GL/AR/AP
FINANCIAL STATEMENT VERSION

2009
Designing of Balance Sheet

2009
Designing of Profit & Loss
For creating new item click on and provide the necessary information

2009
EXPECT PROFIT AND LOSS REMAINING ITEMS NEED TO BE MAINTAIN AS BELLOW

2009
Assigning of Accounts to FSV
For assigning General Ledger Accounts to an item
Provide the Single Accounts or the Range of Accounts to be clubbed under the same item Head.
In case we require any account to change location in case or Debit/ Credit we can use the D/C check box.
USE FSE2 FOR DISPLAY FSV

2009
General Ledger
Use T.Code. SAP 1
Printing of Profit & Loss Accounts and Balance Sheets along with all Financial statement of versions

2009
Groupings and information as Per Schedule VI Companies Act up to
the Profit Centre Level
Trial Balance up to the Profit Centre Level. Standard report . S_PL0_86000030
Comparative figures for the Last Same Period for Financial Year as
well as Tax Year TB, PL, BS, Cash Flow.
Standard report : F.01 for profit and loss, balance sheet.
Cash flow according to AS3 might not get full proof report. S_ALR_87012273
Actual Vs Planned Figures Comparison and Variance of the same Standard report : S_PL0_86000029
Segment Reporting Primary and Secondary Segment Standard report . S_PL0_86000030,
Standard report . S_PL0_86000029.
Accounts Receivable

2009
Accounts Payable
Fixed Assets

2009

2009
Bank & Cash

2009
Travel Management

2009
Chapter 13
Dunning Process
Correspondence (FB12 & F.64)
Correspondence types differ with respect to the contents and structure of the letters we can send to our
business partners.
An account statement and open item list are two types of correspondence. They differ with respect to the
information they contain and the way it is displayed. Unlike an open item list, an account statement displays
all items in a specified period along with the balance carried forward. The open item list merely displays the
open items for a certain key date.
This topic describes the different correspondence types that are delivered with the standard system.
We can define our own types of correspondence and allow users to choose the ones they require. Contact our system
administrator for more information on this.
Account Statement and Open Items List
The account statement can be created for our customers or vendors is an extract from the customer account which
enables him to check the items there or is merely for information purposes. The account statement displays the
balance carried forward, all items in the chosen period and the closing balance of the account.
The open items list is a special form of account statement. It is also sent to the customer for verification or
information purposes. Occasionally, the list is also used as a reminder letter. The open items up to the chosen key
date are displayed in this list.
Both letters contain the document number or reference document number, the document date, the document type,
the currency and the amount for every item as well as the balance of the open items at the key date. The account
statement may also contain the clearing document number. If branches were included in the letter of a head office,
their addresses are listed at the end of the letter.
The layout of the letter is determined via a form. Depending on the form used, the letter may also contain, for
example, the days in arrears per item at the key date or other information. The form must be defined and stored in
the system.
Document Extracts
We can use document extracts to inform our customer about specific line items (e.g. a credit memo). The line items
that we can select for this are defined in the system.
Individual and Standard Letters
We can use the individual letter to enter an individual text when we request correspondence. This text is stored
separately. Information on the customer such as the address is entered automatically by the system. We enter the
individual letter like an individual text.
There is a fixed text defined in the system for the standard letter . All we have to do is request the standard letter for
the customer account we are currently processing. Information on the customer such as the address is entered
automatically by the system. We would send a standard letter to customers if, for example, we have a new accounting
clerk.

2009
Statement of Bill of Exchange Charges
The system automatically creates a correspondence request for the statement of bill of exchange charges when we
post bill of exchange charges. Statements of bill of exchange charges are always document-related. Which company
codes we can specify should incur bill of exchange charges for entering a payment by bill of exchange depends on
how our system is configured. More information on entering payments by bill of exchange can be found in Bills of
Exchange Receivable
Payment Notices
We use payment notices to inform our business partners which open items have been cleared with received
payments. If payments have been made which we cannot allocate to open items, we ask our business partner to
specify for which item the payment was made.
In the standard system, we can select from two correspondence types for payment notices:
Notices without line items
Here, a payment notice is created for the total payment amount, without the line items. If residual items or
payments on account were posted during the clearing procedure, they are displayed separately.
Notices with line items
Here, the items cleared due to incoming payments and/or partial payments are listed individually.
If we want to allocate to open items payments on account or other non-allocated credit memos which were to be
posted during the clearing procedure, it is possible to also create a reply slip . This lists the open items of the
customer. He can indicate the open item to be settled and make further notes.
Restrictions for Payment Notices
The following restrictions apply to payment notices:
Only incoming payment postings made with the functions "Internal transfer posting with clearing",
"Incoming payment" and "Fast entry incoming payment" are supported.
A negative total amount to be paid is interpreted such that a clearing is carried out on another account to
account for the incoming payment. Standard payment notices do not make an exception for cases where
money has been paid to the customer. Thus, in this case, the customer would receive a payment notice.
Intercompany transactions are not supported.
Even for head offices with local processing, payment notices are sent to the head offices and not to the
branches.
Only business transactions for one customer may be posted in a document for payment notices to one-time
account customers.
For clearings between customers and vendors, if the appropriate fields are marked in the master records,
only one payment notice is created per pair of customers/vendors and sent to the customer.
Internal Documents
Internal documents are documents that we print out for our accounting department or another department. We can
print out either individual internal documents, for example when changing and displaying a document, or a whole
series of internal documents (for example, documents that are generated from recurring entry original documents).

2009
There are two steps involved in creating correspondence:
1. First we request the desired correspondence type. When we make a request, the system initially only notes
internally which correspondence types should be created. The correspondence types are then proposed to
we when we are processing the documents and the accounts online. For more information, read the topics
for requesting the individual correspondence types. Which correspondence types are offered in which
functions, depends on how wer system is configured.
2. In a second step, the requested correspondence types are printed. Printing is generally carried out
automatically at a certain frequency. This prints all requested correspondence types. In exceptional cases,
however, it is also possible to print certain correspondence types straight away by themselves.
3. Aprint order is put into the spool system for each company code and correspondence type. From the spool,
we can send the letters to whatever printer we want. For more information on this subject, read the topics
about printing the correspondence.
Go to FB12

2009

2009
Interest Calculation on MSMED
Prereqsites
For Getting the interest calculated for the MSMED Vendors we have to maintain the interest Indicator as M1
The system will only calculate interest for the vendors where the interest indicator is maintained .
As per the requirement we will be only calculating Interest on MSMED for provisioning so no need to pass the actual
entries in the Vendors Accounts
Calculate Interest on Arrears without Postings (F.4C)

2009
Provide the vendor Account Number We can give the range or the indivisual Vendor
Provide the Interest Indicator M1
For viewing the detail calculation

2009

2009
Interest Rate Maintaining (OB83)
For maintaining the rates of interest for the MSMED VENDORS we have to maintain the

2009

2009
Chapter -14
Controlling & Costing
Display BOM ( CS03)/ Multilevel BOM ( CS11)
For view the BOM (Bill of Material)
Go with T.Code: CS03
Provide the material code, plant, BOM usage is 1.
And press enter
Double click on line item

2009
Display Routing ( CA03)
For display routing
Go with T.Code: CA03
Provide the material and plant and click routing or operation button in the above screen
View cost of Final Product ( CK11N)
For view the cost after maintain BOM and Routing

2009
Go with T.Code: CK11N
Provide the costing variant and costing lot size and press enter again press enter
Don t save the above transaction, come back the original screen.
Display Production Order ( CS03)
For display production order
Go With T.code CO03

2009
Provide the order number in the above screen
Press enter
Production Order Confirmation ( CO11N)
Go with CO11N for production order confirmation

2009
Provide the order number and operation and click on save button
View Material Document (MB03)
For view the material document gowith T.Code:MB03
System will take last updated price for GR of FG
For getting actual price on product we need to settle the production order
To Get Actual Cost of Production Order Settlement (KO88)
Go with T.code:KO88
Provide the order number remove tick in test run check box
And click on execute button.

2009
Overheads Assessment Cycle (KSU5)
Else we can use the Following Navigation Path
For Allocating the Expenses of Cost centre to another Cost centre use T.Code: KSU5
Go to Extras Cycle Create in the menu.
Asyou click on Create following screen appears.
Provide the Cycle Name and the start date

2009
Press Enter followingscreen appears
Give the End Date and the Name of Cycle.
Note : Uncheck Iterative Indicators
Click on Attach Segment Icon at the Top of the screen.
As we click on Attach segment following screen appears. Provide the Segment Name and the Long Name.
Select the respective Assessment Cost Element to be used. We will be allocating the cost by the fixed percentage factor.

2009
Click on Senders/Receivers tab
Fill up the Senders Cost centre and the cost element and Receivers cost centre
Now Click on Receiver Tracing Factor
Provide the cost centre ratios in the percentage and save the same.

2009
Executing Assessment Cycle
We have to use the T.Code KS
U5
Provide the Cycle Code and the Start Date and click on .
As we click execute following screen appears.
Click on the Line and get the following report. Showing the distribution of Expenses from One Cost centre to another
costcentre.

2009
For viewing the Report we can go to following report
S_ALR_87013611 - Cost Centers: Actual/Plan/Variance
Provide the Controlling Area , fiscal year , from and to period
Plan version will be 0
Mention the cost centre group

2009
And click on for execution.
Following is the outcome where we can get the cost element wise details
Month end process WIP Calculation ( KKAO)
We can use the following navigation path

2009
The WIP calculation function valuates the unfinished products (work in process).
In the Product Cost by Order component, the work in process is valuated at actual cost. Work in process is the difference
between the debit and credit of an order that has not been fully delivered.
We can calculate WIP at actual costs for the following objects:
Production orders
Process orders
Provide the Controlling area as 1000
Provide the Plant, period and the Year
Provide the version as 0

2009
Run the report in Test Mode first to see the Out put or the WIP valuation
Execute the Report , following is the outcome.

2009
In this we can see the total number of open orders which has not been settled during the period. If the Production is
complete and the order isnot settled then it will come with 0 value.
Once we are satisfied with the results we can run the application the final mode so the system will evaluate the WIP
value.
Note : the system does not generate any accounting entry for WIP process while executing this application.
For Generating the Finance entry we have to settle the WIPmaterial trough CO88 / KO88 application
Settlement of orders which are in WIP (CO88/KO88)
For settling the order individually we can use KO88, it will process order wise.
For Plant wise masssettlement can de done through CO88 T.code.
Provide the Settlement period and the Fiscal Year
For verification purpose run in the Test Run Mode. And click on execute
After execution we can go to FB03 to see the documents accounting Entry.

2009
Changing the Cut-off Period(KKA0)
Procedure
To define the cut-off period:
1. Choose Accounting Controlling Product Cost Controlling Cost Object Controlling
2. Choose the component in which you want to define the cutoff period, such as Product Cost by Period Period-
End Closing Single Functions: Product Cost Collector or Single Functions: Cost Object Hierarchy Work in
Process or Results Analysis Cut-off Period Change.
In Product Cost by Period and Product Cost by Order, choose Work in Process.
In Product Cost by Sales Order, choose Single Functions Results Analysis.
In Product Cost by Period, choose whether you want to calculate WIP for product cost collectors or for objects
(product cost collectors or manufacturing orders) assigned to a cost object hierarchy.
The screen Change Cut-off Period: Initial Screen appears.
3. Enter the results analysis version for which you want to define the cutoff period, and choose ENTER.
The screen Change Cut-off Period appears.
4. Enter the cut-off period.
5. Save the cut-off period.
Result
The system changes the cut-off period in the results analysis version. You can view the results analysis version in
Customizing for Cost Object Controlling.
When it calculates the work in process, the system does not overwrite the results analysis data that proceeds the cut-off
period.

2009
T.Code. KKA0
Provide the version 0
We have to mention the period which we want to close and the Fiscal Year .
As we save the cut-off period, we cannot run the WIP program in the period preceding the closed period.

2009
Chapter -15
Month End Activities
The month end closing has to take into consideration the following activities:
1. Finalise Financial Accounting Postings
2. Automatic Posting of Exchange Rate Differences
3. Post Recurring Journal Entries
4. Run Assessment Cycles
5. Settlement of CWIP and Internal Orders
6. Open / Close Accounting periods
All entries to Financial Accounting should be finalised at this time. This includes:
GL journal entries in Financial Accounting
Accounts Payable postings and
Accounts Receivable postings
Automatic Posting of Exchange Rate Differences
At the end of the month, if we wish to convert any foreign currency balances at a rate other than the rate applied at the
date of the transaction, it is possible to re-valuate these foreign currency postings. For example, we may wish to revalue all
foreign currency items to a rate applicable at the end of the month.
Foreign currency balances for Accounts Payable accounts are re-valued via transaction code FAGL_FC_VAL or via menu
path:
All foreign currency itemsopen asof thisdate will be considered for re-valuation. Note that if we select the field Postings
Requested the document will be automatically posted at the time we hit the execute button (above). The above listing
illustrates the reason for the document posting and the amount posted.
The above program may also be run to revaluate foreign currency open items for general ledger accounts and accounts
receivable.

2009
Give the Vendor Codes / Customer Codes or GL Accounts Range we want to revaluate

2009
Postings will be carried out as follows:

2009
Chapter -16
Year End Activities
The year end closing has to take into consideration the following activities:
1. Fiscal Year Change : Financial Accounting
2. Fiscal Year Change : Asset Accounting
3. Year-End Close : Asset Accounting
4. Year-End Close : Accounts Receivable
5. Year-End Close : Accounts Payable
6. Year-End Close : General Ledger
Fiscal Year Change : Financial Accounting
To open up periods to allow postings in the following year, the procedure is similar to that described in the earlier slides on
Open/Close periods needs to be adhered to. However, please note that this step will only allow postings to the new
financial year the closingof the previousyear sprofit and loss balances to the Retained Earnings account and the transfer
of balance sheet values to the new fiscal year, only occurs by performing a Fiscal year close
Fiscal Year Change : Asset Accounting (AJRW)
As with GL account postings, to allow postings to the new financial year for asset accounting transactions, we need to
change the fiscal year. Note that this step will not carry-forward asset balances from the old-to-new year.
To change the fiscal year in Asset Accounting, goto transaction AJRW or via menu path:
Accounting Financial Accounting Fixed Assets Periodic processing Fiscal Year Change
If we run this in Test mode, we may hit the Test Run button .
If we run this in Production mode (Test run button is NOT selected) then choose from the menu:
Program Execute in Background

2009
Year-end closing of Asset Accounting is required to transfer Depreciation expense to Accumulated Depreciation and
recalculate book values for Assets in the Balance Sheet.
We use the year-end closing program to close the fiscal year for one or more company codes from an accounting
perspective. Once the fiscal year isclosed, we can no loger post or change valueswithin Asset Accounting (for example, by
recalculating depreciation). The fiscal year that is closed is always the year following the last closed fiscal year. We cannot
close the current fiscal year.
The system only closes a fiscal year in a company code if:
The system found no errors during the calculation of depreciation (such as, incorrectly defined calculation keys).
The planned depreciation from the automatic posting area has been completely posted to the general ledger.
The balances from depreciation areas that are posted periodically have been completely posted to the general
ledger.
All assets acquired in the fiscal year have already been capitalised. S
ince this check does not make sense for
assets under construction, we can prevent this check from being made for assets under construction by means of
the asset class.
All incomplete assets (master records) have been completed. The system lists any assets that do not meet the above
requirements in the log of the year-end closing. The log also shows the reason for the errors.
Capital WIP CLOSING (AJAB)
To perform a year-end close Asset Accounting, go to transaction AJAB or via menu path:
Accounting Financial Accounting Fixed Assets Periodic processing Year-end Closing Execute

2009
The program will now run in background.
The program for carry forward of balances can be used for Vendors as well as Customers as shown herein below.
Customer Vendor Balance Carry forward (F.07)

2009
Year-End Close : General Ledger (FAGLGVTR)
At the start of the new financial year it is necessary to close off all profit and loss account balances to the balance sheet
account of Retained Earnings. Also, it is necessary to carry-forward balance sheet account balances into the new fiscal year.
This process achieves these objectives. Note that if any subsequent postings to period 13 to 16 occur, they will
automatically update the opening balance (period 0) in the new financial year.
This function is performed via transaction FAGLGVTR or via menu path.

2009
Accounting Financial Accounting General Ledger Periodic processing Closing Carry forward FAGLGVTR -
Balance Carry forward (New)
Year-End Close : General Ledger
Each gl account, together with the balance brought-forward will now be displayed.
Note that if we subsequently back-post to this prior year after this run has been completed, we will need to re-run this
transaction. When re-running this transaction, only balances that have changed will be transferred.

2009

2009
Chapter -17
Planning
Planning At profit centre level (GP12N)
Provide the planner profile as SAPFAGL
Press enter

2009
Provide the summary table FAGLFLEXT
Press enter
Following Screen Appears .
There are six Layouts for maintaining planning Data
Give from Period and To Period For the period for which we want to plan for the Company.
Profit Centre Mention the Profit Centre we are planning for.
Company Code Mention the Company Code
Ledger - The Planning can be done one Ledger wise at a time we will be doing Planning
for SL in general.
Financial Year - Mention the Year of Planning
Currency - It will be Always the Company Currency (INR)
Account Number to Mention the Range of GL A/c for which Planning is to be done.
Form-Based Entry
Indicator showing whether the current planning session is performed with "Layout planning" (indicator is activated).
If we activate the "Form-based planning" indicator, all objects with valid master data are displayed, regardless of
whether the objects have been already planned or not. The same structure of characteristic values is displayed in
each planning session.
If we do not activate the indicator, only objects already planned are shown. We can plan new characteristics
here if we wish and insert them in the rows.
Free Entry of Unplanned Records

2009
Indicator showing whether the planning transaction in the "Free entry" mode was carried out (active indicator).
In "Free entry" mode only those characteristic values for which plan data already exists in the databank will be
displayed. New characteristic values can be entered here and inserted in the rows As a rule, all characteristic
values are shown in the header area.
In CO-PA, all characteristics with an interval or a * in the selection conditions also display only the planned
characteristic values in the header, in order to keep the processing load on the SAP System low.
In "Form-based entry" mode, all characterisic values with valid master data for characteristics will be displayed
in the rows. No new characteristic values can then be entered here.
For view the lay outs for input values . Use lay out 0FAGL-01 for profit center planning and use layout 0FAGL-06
cost center planning.
Provide the values as shown above and click on overview button .
Provide the plan values as shown above
Save.
Distribution key 1 for equal distribution and Distribution key 2 for respective period only and 0 for Manual Distribution .

2009
Now we can distribute the Expenses month wise. Select the account head and click on the Icon on the top of the
screen. Now we can provide the Expenses month wise equally distributed or manually distributed as shown below.
Uploading Plan Data from Excel Sheet (GLPLUP)

2009
Posting period 9 To 9
Profit Center 1102007
Company Code 1000
Ledger 0L
Record Type 1
Version 0
Fiscal Year 2008
Currency INR
Account Number Trans. Currency
210010 100000
210020 200000
210030 300000
210040 400000
210050 500000
210060 600000
210070 700000
210080 800000
210090 900000
The Data has to be created in Excel and it can be only uploaded in the Text( Tab delimited) format. You can create this
format by saving the
profitcenter1.txt

2009
.
For view the report
Go with T.Code: S_PL0_86000029
Or following navigation
Provide the values as shown above and click on execute button.

2009
Chapter -18
Travel Management
SAP Travel Management supports all processes involved in handling business trips. Its comprehensive functionality is
integrated with settlement, taxation, and payment processes. Travel Management enables us to request, plan, and book
trips, create travel expense reports, and transfer expense data to other functional areas.
Overall Process of Travel Management
Purpose
The goal of this process is the complete, integrated management of all processes involved in a business trip and the travel
expenses incurred. The process includes the entire procedure of requesting and planning a trip, accounting the travel
expenses and the correct taxation in Payroll Accounting (HR), correct posting of the travel expenses in Financial Accounting
(FI), and clearing in Controlling (CO) or Funds Management (FI-FM) according to the allocation-by-cause principle.
Process Flow
The overall process can last a relatively long time, with the actual trip representing the focal point in this process. The
following gives an example of the process flow in decentralized organization in which the traveler represents the central
figure. Other forms of organization are, of course, also conceivable.
Travel Request
1. The traveler uses the SAP system to submit a travel request to his or her manager. The travel request supplies the
superior with information such as the date, destination, and purpose of the trip, the transportation and accommodations
required, the requested advance and the estimated costs for the trip.
2. The manager can approve the request, send it back for corrections, or reject it.
3. If an advance is requested and approved, there are the following options for payment:
Cash payment by cash office
Check
Bank transfer to the employee's bank account (via DME)

2009
Forwarding of the amounts for payment to financial accounting
The paid amounts in the first three cases are, however, also forwarded for posting to financial accounting.
Travel Planning
4. After a travel request has been approved, the traveler determines the available travel services (flight, hotel, car
rental; in Germany also: train) in a travel plan and books them online in the SAP system. The reservation is made in an
external reservation system that must be connected to the SAP system. When the services are selected and booked, the
system checks to make sure they comply with the company's travel policies as defined in Customizing for Travel
Management. It also applies any existing company-specific rates and rebate agreements.
5. When the traveler has recorded the travel plan, the booking code (PNR) is entered in the processing queue of the
travel agency. The travel agency checks the correctness and consistency of the booking.
6. If changes are made to the booking outside the SAP system, they are transferred to the SAP system in a
synchronization process.
7. The travel plan is also transferred to the appropriate manager for approval. As soon as the manager has approved
the travel plan, the travel agency can issue the ticket and the trip documents and send them to the traveler.
Travel Expense Report
8. After the trip has been taken, the traveler completes his or her travel expense report, including all necessary
data and documents. The system applies all statutory and company-specific specifications stored in Customizing and
checks the consistency of the entries against these specifications.
9. The expenses department checks the travel expense report and the original documents and receipts. Now the
travel expense report is sent to the manager for approval, who can then release it for settlement.
10. As soon as the trip is approved, it is settled in the SAP system: On the basis of the trip provisions set for the
relevant traveler, the system determines the travel expense results, especially the amount for reimbursement. To
determine the reimbursement amount, you can choose between per diem/flat rate reimbursement and reimbursement
according to individual receipts for meals, accommodations and travel costs; for all other categories, reimbursement on
the basis of individual receipts must be used.
11. The travel expense results are prepared to suit the method of payment chosen and made available to the
corresponding components (Financial Accounting, Payroll Accounting, Controlling Funds Management) with the
appropriate additional information.
12. The payment of reimbursement amounts can now take place as follows:
By check
Through payroll accounting
Through financial accounting
By bank transfer to the employee's bank account (via DME)
The travel expense results are always transferred for posting to Financial Accounting. The amounts are transferred from
Financial Accounting to Controlling.
13. The traveler receives a travel expense statement with the relevant trip data and the accounting results.
Result
A single, complete record of the data of a business trip exists in the SAP system. The travel planning data was recorded in
the system for approval or reservation purposes. The documents were issued on the basis of the reserved travel services.

2009
The SAP system has settled the travel expenses incurred by the trip and forwarded them for further processing in Financial
Accounting, Controlling, Funds Management and (if necessary) Payroll Accounting.
Creating a Travel Request
Procedure
From the SAP Easy Access menu you create a travel request as follows:
1. Choose Accounting Financial Accounting Travel Management Travel Manager Create a Travel Request.
2. Enter the general trip data as required.
The following areas are options (you can expand the data entry areas by choosing (Expand):
i. Add. Destinations: Enter the destinations of any additional trip segments that follow the first
destination.
ii. Trip Advance: If you require a trip advance, enter this here. The advance amount is converted
into the expense amount directly. The entry for the required advance is used as information
for approval of the travel request at a later date and forms the basis for the payment.
iii. Alternative Cost Assignment for Entire Trip, if Different to Master CA: Here you can assign
100% of the costs for the entire trip to one account assignment object that is different to the
one specified in the travel expense assignment guidelines.
The system adjusts the second (and if necessary also the third) field according to the account
assignment object type: Field length, F4 input help, and F1 help. In the second (and if
necessary the third) field, enter the account assignment object values.
iv. Comments: In this user-defined text field, you can enter any additional comments for the trip.
This can also provide important additional information for the approving manager.
3. Expand the Request Transportation/Accommodation area by choosing (Expand).
4. In the overview table, where the trip destinations you specified in the previous section have been entered
automatically, you can request the required travel services by clicking the pushbutton for the appropriate
service.
Alternatively, you can select the line of the location you want to edit and expand the data area of the
corresponding travel service underneath the overview table directly.
5. In the data area that appears, enter the required data and choose Copy, with Quick info Copy to Request.
6. To save your completed travel request, choose Save.
From here you can also use the Overview button with Quick info Overview of Trip (F5), to go to an overview of your
booking information, or you can have your trip approved by choosing Approve with Quick info Approve (F8).

2009
Sending a Travel Request
Use
Once you have saved a travel request, you can send it to your superior for approval via the SAP Communications Interface.
If an approval of business trips is not required at your enterprise, you can use the travel request as a travel plan model and
send it to the person responsible for booking the requested flights, hotels or car rentals.
Procedure
1. In the Travel Management menu, choose Travel Manager.
2. Select the travel request from the overview area and choose Change.
3. Choose Send.
An overview of your trip data appears.
4. Choose .
5. Enter the recipient and choose Send again.
Result
The travel request was sent.
The recipient can then approve the travel request or book the travel services.
Approving a Travel Request
Use
You can approve travel requests individually using the Travel Manager.
So that an automatic transfer of the requested trip advance can be made via FI, the appropriate travel request must have
been approved.
Prerequisites
In order to approve travel requests you require a special authorization. The setting for this authorization is made in the
authorization concept of the role assigned to you.
In the standard delivery the approving manager (SAP_FI_TV_MANAGER_GENERIC) role has this authorization.
You can edit the roles from the SAP Easy Access menu via Tools Administration User maintenance Roles.
Procedure
1. From the Travel Management menu, call up the Travel Manager.

2009
2. Choose List of all Trips.
3. Select the travel request to be approved, and choose Change.
4. Choose Approve.
To approve travel requests using the approval program, proceed as follows:
1. In the menu, choose Travel Management Travel Expenses Periodical processing Approve trips.
2. On the tab page Status, enter in the Approval status field the value 1 (Request entered) as selection criteria.
3. To execute the program, choose .
4. Select all the trips to be approved.
5. Choose .
For more information about all the functions of the approval program for trips, see the SAP Library under Travel
Management Travel expenses Approve trips Approval program.
Result
Once the object Travel request from the Travel Manager has been approved the status of the corresponding travel expense
report for a trip also changes to Request approved / to be settled. The person responsible for processing the request (can
also be the traveler) can see from the overview of the trips that the request has been approved and can then carry out the
appropriate travel planning or travel expense statement.
If advances have been requested for a trip, the transfer via Financial Accounting (FI) can now be made.
Mass approval
You can approve a large number of travel requests using the approval program for trips. This type of travel request
approval refers to the status Request approved/to be settled for the object travel expense report and not to the object
travel request in the Travel Manager

2009
Chapter -19
Investment Accounting
We are planning to go through Assets Accounting Module for Investment Accounting
Create Mutual Fund Master(AS01)
Put quality as 1 unit of measure EA
Investment procurement(F-90)

2009

2009
Put balance quantity in the above screen (1qty maintained in the master+99 from trasaction=100QTY)
Transaction type 100 for asset procurement.
Sale of Investments
Asset retirement with revenue with customer
Partial clearing go with transaction type 260

2009
Press enter

2009
Chapter-20
Tips & Tricks for effective usage of SAP
Copy & Paste Data of SAP Screen
In general Ctrl+c isused for copyingany cell or dataand Ctrl+V isused for pasting cell at the
desired location .
But many timesay the S
APscreen Ctrl+c doesnot works. S
o we can use Ctrl+Y and + sign
appears in place of Cursor of the Mouse and then we can select the specified Data and then paste at
the desired location.
Table Settings
Use this function to change the settings of a table control. You can change the width and position of
a column (using drag and drop). You can save the display at any time as a variant by entering a
name and choosing 'Create'.
You can use any variant as your personal 'default setting' for the transation, or call it just for the
current transaction. ( Current setting ). The default setting applies from the next time you call the
transaction.Choose the required variants from teh list boxes. If the list box only contains the entry
'Basic setting', you must first create a display variant. You can also define a new variant as the
default when you create it by selecting the corresponding checkbox. The display defined in the
application program ("Basic setting") can always be used as the default or current setting.
The 'Delete' function allows you to delete any display variant that you have already created.
Step by step instructions:
o Configure the table control as you want it.
o Click the settings button at the top of the table control.
o Enter a name and choose "Create".
o If you want this variant to appear whenever the table control appears, set the "Use as default
setting" option.
o Choose "Copy" to close the dialog box.
o If you want to change how existing variants are used, or want to reactivate the basic setting,
choose the corresponding settings from the list boxes and choose 'Copy' to close the dialog box..
Notes

2009
As well as user-specific variants, there are also System variants, which are visible to all userse in
the current client (although user-defined variants, where they exist, override system variants). You
can edit them using the 'Administrator' function (see the help on the relevant screen).
Click on on any grid application
Creating your Own Favourite menu
What ever transaction we use often we can put those transactions in the favourite menu at the Top.
We have to select the desired T.Code and with the single click on the T.code drag the T.code to the
Favourite folder and drop on the folder .
Creation of Folders : RIGHT CLICK favourites and select Insert Folder
Following Pop up will appear. Give the Desired folder Name and Save .

2009
A demo can be viewed by clicking on the
menu.wmv
icon.
Reduction of Repetitive work
If we have to Execute a report in general for getting the Exact Output we have to fill up many criteria
which we require to execute frequently `

2009
Click on Save button another screen appears
We can provide the Variant Name and save the same .
Note : the Name should be saved starting with / and the name
So the next time when we run the same report all the fields which were saved, will come prefilled
and we can execute the report for the updated information.
Changing Layout of a Report
If in any report we find the above tool bar we can change layout of the reports as per our
requirement with the selected fields.
Click on ( Change Layout) and following pop up screen appears . we can select the fields as
per our requirement

2009
We can select the Col. Content and click on the suitable tab to move or delete from the layout
and click on
The New format will be applicable and the out will be in the new format.
Setting up the Printer for Each User ID
Go to S
ystems on the main screen select User Profile then select Own Data

2009
Go to the Detailstab
Spool Control
Provide the Output Device as ZGCL for laser printers.
Select Output immediately for the direct printout, else the print out will go to spool and we have
to take the print out separately.
If we want to delete spool Delete after Output
And save.
Sending Mail from the SAP System
If we require to send any report directly from SAP to external email ID, or to any other SAP user of
the same company. We can send it through following way .
Go to System -> List -> Send

2009
Note : many a times send may appear at different places so we can search the same at navigating
the top menu.
As we click on send the following screen appears
In the Document Contents we can write addressing letter.
And in the Recipient Tab we have to provide the Recipient Address and Recipient type to whom we
send the mail.
We have following Types of Recipient for sending the mail.
For sending internal mail from SAP to SAP we have to select B SAP Logon Name.
And for sending on email we have to select U Internet Address

2009
After selecting the recipient click on Send button or in case we are required to attach any
external file of Word or Excel then click on attach and select the file.
Once we send the file on the SAP ID the receiver will immediately receive a POP UP message as
follows . he can click on the execute button the see the mails and the attachments .
Else if the use is not online at that time then we can go to SAP Business Work Place. Click on the
icon or we can use T.Code S
BWP
A New as Business Workplace Appears
Where we have Inbox / Outbox/ Resubmission Folders which can be used for Receiving/ Sending and
creation mails and communications.

2009
From Inbox as normal mails you can see the mails and the attachments.

2009
Chapter-21
Solution Manager
The SAP Solution Manager supports us throughout the entire life-cycle of our solutions, from the
Business Blueprint to the configuration to production processing. It provides central access to tools,
methods and preconfigured contents which we can use during evaluation, implementation and
operational processing of our systems.
Logging a problem while working with SAP
Any where in S
APwhile workingif we are facingproblem we can go to help menu and select Create
S
upport Message
Following pop up screen appears

2009
In the Screen if we are creating the support message directly from the screen of Entry the
Component Field comes automatically.
In the Short text we have to describe the nature of problem. And then the priority of the problem
solving
Priority indicate the hierarchy for solving the Issues .
If Low Priority then the problem will go to the Core Team Members
If Medium Priority the Problem Goes to HO team.
If High Priority The Problem is escalated to Consultants .
In case of Very High Priority The Problem will be sent to SAP
Click on Send . You can attach the external files also viz. Word File with Error Screen shots.
Viewing the Issue Logs / Status /Solution / Confirmations
After Posting the Issue to the Solution manger. For Viewing these issues we have to logon to
Solution Manager.

2009
As we log on to Solution Manger Following Screen Appears
Click on S_SMC_47000017 - All open Support Notifications for viewingall issueslogged on and
their status.

2009
For Shorting all the Finance / Any other Module Wise Issues select the SAP Component column .
And Click on Filter button and provide the criteria of filtering
And click on to get filtered data

2009
For Viewing the Details of any single issue click on selected line.
A screen with various tab appearsfor viewingthe detailsof the logsselect Log from the drop down
list
and click on magnifying glass side by.

2009
For viewing the attachmentsif ant attached to the issue log. Click on Transaction Data
and go to first Document tab if any attachments are there
it will displayed in the display area. Double click on the Icon to open the attachment.
Escalating the Problem higher Level/ Changing the Status

2009
Click on Display / Change Icon
Now we can edit the Message.
Select the New status / Change the priority and we can specify the solution Processor code so that it
can direct addressed to the person and he can provide the solution specificly.

2009
And save the log.
Reports / Referring to Old Solutions
S
elect S
_SMC_47000016 - Find Support Notifications by the following navigation.
Select the Status as per our requirement .
And provide the SAP Component details in SAP Data Support Message Section

2009
Or we can S
earch with Wild Card like FI* in the SAP Component Field.

2009
Personalising the F4 Values
Many times when we press F4 value all the records are displayed out of which most then are not of
use of a particular user. So we can restrict the list by personalising the list
For personalising the list , click on the Data Line and click on the Icon Insert In Personal List
Go on clicking Insert In Personal List for addingthe value and then next time we call for F4 values
The selected values are only displayed.

2009
This way we can restrict our selection. This setting is based on the user ID and to done
manually on each user ID.

2009
Notes

2009
Index
(
(MR8M, 262
A
ABAA, 191
ABAON, 185
ABAVN, 187
ABAW, 189
ABUMN, 187
Account Groups, 1
AFAB, 179, 190, 192
AJAB, 321
AS01, 36, 173, 337
AS11, 39
AW01N, 40, 183, 186, 187
C
Chart of Accounts, 1, 2
Company, 1, 2, 5, 15, 16, 17, 18, 24, 28, 36, 46, 66, 73,
90, 128, 129, 131, 133, 141, 179, 183, 185
Controlling area, 2, 8
Cost Centre, 3, 7, 9
F
F.14, 63
F.64, 291
F.81, 55
F-01, 56
F-02, 49
F-04, 277
F-92, 183
FB03, 52, 280
FB08, 56, 276
FB12, 291, 293
FB50, 49, 51, 58
FB70, 89, 117
FBD1, 60
FBM3, 57
FBRA, 129, 276
FBS1, 53
FBZ5, 5, 74, 124
FCH5, 5, 126
FCHF, 6, 127
FCHI, 47, 48
FCHN, 5, 123
FD01, 28
FD11, 274
FI01, 42
FI12, 42, 45
Fiscal Year, 2
FK01, 23
FS00, 16
FS15, 18
FTXP, 209
FV03, 270
G
GLPLUP, 329
GP12N, 326
J
J1ID, 160, 225
J1IH, 226
J1IIN, 272
J1INBANK, 203
J1INCCREP, 207
J1INCERT, 204
J1INCHLN, 199
J1INQEFILE, 207
J2I5, 238, 239
J2I6, 238, 239
J2I9, 235
J2IER1, 7, 244
J2IUN, 241
K
KA01, 18, 19, 22
KE52, 3
KE53, 3
KKA0, 315
KKAO, 311
KO01, 34, 161
KO88, 172, 177, 305, 314
KSU5, 305, 306, 309
M
ME21N, 164
ME29N, 166

2009
MIGO, 83, 84, 167
MIRO, 79, 84, 86, 87, 170, 260, 262, 263
MM03, 250
MR8M, 264
MRBR, 265
O
OB83, 298
OV50, 269
P
Parallel Accounting, 2
Profit Centre, 3
V
VF03, 271
Z
ZFF67, 6, 153

This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.

SAP FICO_end user manual.pdf

More Related Content

What's hot (20)

Similar to SAP FICO_end user manual.pdf (20)

Recently uploaded (20)

SAP FICO_end user manual.pdf