SenseTek Stratos Modulaser Data Sheet
0 likes517 views
Modulaser is an advanced aspirating smoke detection system featuring a modular design that simplifies installation and maintenance while enhancing performance over traditional detectors. It utilizes a patented technology for rapid air sampling and offers versatile connectivity options, making it suitable for a wide range of applications, even in challenging environments. With a focus on user-friendly interfaces and efficient operations, Modulaser provides reliable early warning detection through innovative features such as forward scattering optical detection and environmental compensation.
SenseTek Stratos Modulaser Data Sheet
- 1. Product Data Sheet ModuLaser-AirSense AirSense Stratos ModuLaser High Sensitivity Smoke Detector Description ModuLaser is a scalable aspirating smoke detection solution that makes installation easier, maintenance quicker, and takes applications further than traditional air sampling detectors. Two basic module types comprise the ModuLaser solution: a display module, and up to eight detector modules. Each detector module can accommodate up to 100 meters of pipe. Control modules and detector modules communicate by RS-485 interconnections. Display modules are available in three configurations: keypad with TFT display; LED display only; and, TFT display plus keypad with command controls. The patented ModuLaser design makes it possible for a single ModuLaser display module to serve as much as 800 meters of active sampling pipe among as many as eight discrete zones. This highly efficient layout also means the protected area can be served by shorter pipe runs, which makes response time faster when compared with traditional pipe configurations. But ModuLaser isn’t just about efficient system design. It’s also about easy connectivity, superb usability, and technology that now makes air aspirating detection a practical solution for nearly every application. Thanks to advanced features that make it virtually impervious to dust and dirt, ModuLaser is ideal for use in hostile environments that would disable other kinds of smoke detectors. Forward scattering optical detection adds early warning capability without the risk of nuisance alarms normally associated with high sensitivity smoke detection, while exclusive environmental compensation technology adds a high degree of reliability to an already solid detection solution. Applications ModuLaser is ideal anywhere active air sampling provides a more effective solution than beam detection or point detection, which rely on convection currents in order for air samples to reach the smoke sensor. Unlike traditional point detection, ModuLaser sampling points do not require electrical devices, power, wiring, or junction boxes. In fact, servicing and testing need only be carried out at the display and detector modules, and at the sampling point furthest from the detector module. In addition, ModuLaser modules can be installed so they remain within reach, regardless of how inaccessible the sampling points are. This permits maintenance to be carried out and electrical connections to be made in a convenient location away from the protected space. Because aspirated air sampling actively draws air into the detector instead of relying on convection currents, it tends to provide a quicker reaction to incipient (developing) indicators of combustion. This makes it particularly well-suited to areas where the air is highly filtered for contaminants. Standard Features E Patented Modular Design Separate centrally-controllable detector modules allow efficient piping and discrete zones with no overlap. E Zoned aspirating smoke detection Individual detector modules provide detection for individual areas or zones, specific zone alarm information can be transmitted to the main fire alarm panel via a common APIC address card in the display module or through dedicated alarm relays within each detector module. E Versatile connectivity USB and IP interfaces break through connectivity barriers to bring remote access and easy data transfer to hard-to-reach aspirated detection applications. E Simplified installation Ingenious docking station design allows detectors to be easily connected together as a group. Sensitive electronics are easily removed to ensure they will not be damaged during first fix installation. Aspirating pipework and cable entries can easily be made into either the top or the bottom of the unit.Intuitive user interface. E Intuitive user interface Bright easy-to-see color TFT screen and universal navigation and control buttons take the guesswork out of programming and diagnostics. E Easy pipe connection The patented quick fit pipe adaptor system locks down securely, yet leaves plenty of room for easy pipe connection and removal.
- 2. ModuLaser-AirSense AirSense Stratos ModuLaser High Sensitivity Smoke Detector Specifications Supply Voltage 18 to 30 Vdc Current Display Module (Normal and CM) 232 mA Current Display Module (Minimum) 204 mA Current Detector Module 236 mA at fan speed 1 340 mA at fan speed 6 (default speed) 815 mA at fan speed 16 Environmental Operating temperature -20ºC to +60ºC (EN54-20) Relative humidity 0 to 95% RH (non condensing) IP Rating Display Module IP30 IP Rating Detector Module IP30 (IP 50 with exhaust fitted) Mechanical Size (each module) 110mm (W) x 300mm (H) x 133mm (D) Weight display module 1.18Kg Weight detector module 1.57Kg Colour Cream Cable entries (per module) 2 x M20 / 1/2" at the top 2 x M20 / 1/2" at the bottom 2 at the rear Detector module orientation Vertical (0 deg or 180 deg) or horizontal Detection Detection principle Laser light scattering mass detection and particle evaluation Particle sensitivity range 0.003μ to 10μ Measurement range (% Obs/m) 0.0015% to 25% Alarm levels 4 (Aux, Pre-alarm, Alarm and Alarm 2) Sampling pipework Inlets 1 per detector module Lenght 100m per detector module Diameter 27mm or 25mm OD Holes up to 50 holes per detector module Exhaust 1 (optional) per detector module Filter Internal filter in each detector module Monitored with fault warning when filter is 80% blocked Inputs Per module 2 - Programmable Supervision Optional Supervision rating 15K ohm Outputs Per module 3 - Programmable Rating 2A @ 30V User interface Indicators LED (display and detector modules) LCD (Normal and CM display) Navigation Keypad Connectivity Display module IP and USB 4 Email accounts APIC support SenseNET networking BACnet and Modbus (CM display only) Event log Display module 20 000 events Detector module 20 000 events Chart recorder Sampling period Adjustable between 1s and 60 s Capacity 1 months @ 1s / Up to 5 years @ 60 s Values recorded Detector value, 4 alarm level values, flow value and temperature (all simultaneously) Ordering Information Part No. Description 9-30780 ModuLaser - Minimum Display Module 9-30781 ModuLaser - Standard Display Module 9-30782 ModuLaser - Command Module Display 9-30783-1 ModuLaser - Advanced Detector Module SenseTek Fire & Security Solutions Abberdaan 162 1046 AB AMSTERDAM www.sensetek.nl sales@sensetek.nl 020-6131611