signal propagation.pptx basics of signal propagation
- 1. Signal Propagation Basics EECS 4215 September 11, 2024
- 2. 2 Signal Propagation Ranges • Transmission range – communication possible – low error rate • Detection range – detection of the signal possible – communication not possible • Interference range – signals may not be detected – signals add to the background noise distance sender transmission detection interference Note: These are not perfect spheres in real life!
- 3. 3 Signal Propagation • Propagation in free space is always like light (straight line). • Receiving power proportional to 1/d² in vacuum – much more in real environments (d = distance between sender and receiver) • Receiving power additionally influenced by – fading (frequency dependent) – Shadowing (blocking) – reflection at large obstacles – refraction depending on the density of a medium – scattering at small obstacles – diffraction at edges reflection scattering diffraction shadowing refraction
- 4. 4 Propagation Modes • Ground-wave (< 2MHz) propagation • Sky-wave (2 – 30 MHz) propagation • Line-of-sight (> 30 MHz) propagation
- 6. 6 Ground Wave Propagation • Follows the contour of the earth • Can propagate considerable distances • Frequencies up to 2 MHz • Example – AM radio – submarine communication (long waves)
- 8. 8 Sky Wave Propagation • Signal reflected from ionized layer of atmosphere back down to earth • Signal can travel a number of hops, back and forth between ionosphere and the earth surface • Reflection effect caused by refraction • Examples – amateur radio – International broadcasts
- 10. 10 Line-of-Sight Propagation • Transmitting and receiving antennas must be within line of sight – Satellite communication – signal above 30 MHz not reflected by ionosphere – Ground communication – antennas within effective line of sight due to refraction • Refraction – bending of microwaves by the atmosphere – Velocity of an electromagnetic wave is a function of the density of the medium – When wave changes medium, speed changes – Wave bends at the boundary between mediums • Mobile phone systems, satellite systems, cordless phones, etc.
- 11. 11 Line-of-Sight Equations • Optical line of sight • Effective, or radio, line of sight • d = distance between antenna and horizon (km) • h = antenna height (m) (altitude relative to a receiver at the sea level) • K = adjustment factor to account for refraction caused by atmospherics layers; rule of thumb K = 4/3 h d 57 . 3 h d 57 . 3
- 12. 12 Line-of-Sight Equations • Maximum distance between two antennas for LOS propagation: • h1 = height of antenna one • h2 = height of antenna two 2 1 57 . 3 h h
- 13. 13 LOS Wireless Transmission Impairments • Attenuation and attenuation distortion • Free space loss • Atmospheric absorption • Multipath (diffraction, reflection, refraction…) • Noise • Thermal noise
- 14. 14 Attenuation • Strength of signal falls off with distance over transmission medium • Attenuation factors for unguided media: – Received signal must have sufficient strength so that circuitry in the receiver can interpret the signal – Signal must maintain a level sufficiently higher than noise to be received without error – Attenuation is greater at higher frequencies, causing distortion (attenuation distortion)
- 15. 15 Free Space Path Loss • Free space path loss, ideal isotropic antenna • Pt = signal power at transmitting antenna • Pr = signal power at receiving antenna • = carrier wavelength • d = propagation distance between antennas • c = speed of light (» 3 ´ 10 8 m/s) where d and are in the same units (e.g., meters) 2 2 2 2 4 4 c fd d P P r t
- 16. 16 Free Space Path Loss in dB • Free space path loss equation can be recast (decibel version): d P P L r t dB 4 log 20 log 10 dB 98 . 21 log 20 log 20 d dB 56 . 147 log 20 log 20 4 log 20 d f c fd
- 18. 18 Multi-path Propagation • Signal can take many different paths between sender and receiver due to reflection, scattering, diffraction • Time dispersion: signal is dispersed over time – interference with “neighbor” symbols, Inter Symbol Interference (ISI) • The signal reaches a receiver directly and phase shifted – distorted signal depending on the phases of the different parts signal at sender signal at receiver LOS pulses multipath pulses
- 19. 19 Atmospheric Absorption • Water vapor and oxygen contribute most • Water vapor: peak attenuation near 22GHz, low below 15Ghz • Oxygen: absorption peak near 60GHz, lower below 30 GHz. • Rain and fog may scatter (thus attenuate) radio waves. • Low frequency band usage helps.
- 20. 20 Effects of Mobility • Channel characteristics change over time and location – signal paths change – different delay variations of different signal parts – different phases of signal parts – quick changes in the power received (short term fading) • Additional changes in – distance to sender – obstacles further away – slow changes in the average power received (long term fading) short term fading long term fading t power
- 21. 21 Fading Channels • Fading: Time variation of received signal power • Mobility makes the problem of modeling fading difficult • Multipath propagation is a key reason • Most challenging technical problem for mobile communications
- 22. 22 Types of Fading • Short term (fast) fading • Long term (slow) fading • Flat fading – across all frequencies • Selective fading – only in some frequencies • Rayleigh fading – no LOS path, many other paths • Rician fading – LOS path plus many other paths
- 23. 23 Dealing with Fading Channels • Error correction • Adaptive equalization – attempts to increase signal power as needed – can be done with analog circuits or DSP (digital signal processor)
- 24. Reading • Mobile Communications (Jochen Schiller), section 2.4 • Stallings, chapter 3 24