Single phase i.m.
- 1. KALOL INSTITUTE OF TECHNOLOGY& RESEARCH CENTER PRESENTATION ON SINGLE PHASE INDUCTION MOTOR SUBJECT:-A.C. MACHINE ENROLLMENT NO:-130260109039
- 2. ●Topics to be covered…… •Working Principle & Construction of single phase induction motor •Double field revolving theory •Types of single phase induction motor(or Method of starting) •Equivalent circuit of single phase induction motor
- 3. ●Working principle:- • The single-phase induction motor operation can be described by two methods: 1)Double revolving field theory 2)Cross-field theory. •Double revolving theory is perhaps the easier of the two explanations to understand
- 4. ●Double revolving field theory:- •A single-phase ac current supplies the main winding that produces a pulsating magnetic field. •Mathematically, the pulsating field could be divided into two fields, which are rotating in opposite directions. •The interaction between the fields and the current induced in the rotor bars generates opposing torque .
- 5. ●Double revolving field theory:- •The interaction between the fields and the current induced in the rotor bars generates opposing torque. •Under these conditions, with only the main field energized the motor will not start. •However, if an external torque moves the motor in any direction, the motor will begin to rotate.
- 6. ●Double revolving field theory:- •The pulsating filed is divided a forward and reverse rotating field •Motor is started in the direction of forward rotating field this generates small (5%) positive slip Sr= Ns-Nr/Ns ● Reverse rotating field generates a larger (1.95%) negative slip Sb= Ns+Nr/Ns
- 7. ●Construction of single phase induction motor:- Construction of a single phase IM is similar to 3- phase squirrel cage induction motor. The rotor used here is same as that used in 3 phase squirrel cage Induction motor and it is very simple in design, robust in construction. The rotor is not insulated from the core. The slots on rotor are either semi-closed type or totally closed type. Rotor windings are perfectly symmetrical and short circuited with each other. An uniform air gap is there in the between stator an rotor .
- 8. ●Construction of single phase induction motor:- Single phase motor can be wound for any even number of poles i.e two, four, six, etc. This type of motor normally have two Stator windings. In motors that operate with both windings energized ,the winding with more wire (more turns) is known as main winding and the other is called auxiliary winding. In case of this motor synchronous speed equation is (Ns = 120f / P) also applicable like three phase motors . This is mainly because the poles have opposite magnetic polarity.
- 9. ●Construction of single phase induction motor:-
- 10. ●Types of single phase induction motor:- According to the method used for it’s starting single phase I.M. can be classified into following types:- 1)Split phase motor/ Resistance start motor 2)Capacitor start motor 3)Capacitor start-Capacitor run motor 4)Two value capacitor motor 5)Shaded pole motor
- 11. ●Split phase motor:- A split phase induction motor consist of two main parts:- 1) Stator 2) Rotor The stator is provided with single phase windings a)Main winding b)Auxiliary winding The two winding are placed 90 degree electrical apart & are connected in parallel across the single phase AC supply. Whereas the auxiliary winding has a high resistance & low reactance.
- 13. ●Capacitor Start Motor:- •In these motors, a capacitor is connected in series with the starting winding , which takes leading current & hence produce high starting torque. •The capacitor motor can be classified as :- 1. capacitor start 2. capacitor start & capacitor run 3. Two value capacitor motor
- 14. ●Capacitor start motor:- •In this motor the capacitor is connected in series with the starting winding which takes leading current. •As the capacitor is used only at start , it is rated for intermittent duty & the cost of which decreases. •A relatively small ac electrolytic type capacitor is used. •This motor has high starting torque, about 1.5 times the full-load torque.
- 16. ●Capacitor start & Capacitor run motor:- •In this motor there is no centrifugal switch, so the capacitor remains in the circuit & helps to improve the power factor under running condition. •The power factor of this motor under running condition is high. •The operation is also quiet & smooth. •The torque under running condition is also higher than the capacitor start & split phase type motor.
- 18. ●Two value capacitor type motor:- This types of motor employs two capacitor 1)Start capacitor(Cs) 2)Run Capacitor(Cr) The Start capacitor is rated for short rating & is used for starting. The Run capacitor is rated for continuous duty as it is used under running condition also.
- 19. ●Two value capacitor type motor:- A centrifugal switch is used to disconnect the start capacitor when the motor has reached about 70 to 80% of its full load speed. This motor is useful where the motor has start against heavy loads. The starting torque is about 2 to 2.5 times its full load torque.
- 21. ●Shaded pole motor:- •A shaded pole motor has a stator consisting of salient poles & a squirrel cage rotor. •The main winding is wound on the entire pole section. •When the ac supply is given to the stator winding of shaded pole motor , due to shading provided on the salient poles, a rotating magnetic field is produced.
- 23. ●Equivalent circuit of single phase induction motor
- 24. ●Equivalent circuit of single phase induction motor