Smart 3D
- 1. PRODUCT SHEET BOOST PRODUCTIVITY: The latest release of Smart 3D technol- ogy covers the products SmartPlant® 3D, SmartMarine® 3D, and SmartPlant 3D Materials Handling Edition. Smart 3D tech- nology delivers approximately 30 percent more productivity than any other system available today. Take advantage of the key components of the Smart 3D technology architecture to increase productivity, acceler- ate projects, and gain a competitive edge: • Rules – Capture engineering knowledge and push it into design with an extensive and customizable rule set. • Relationships – Capture and maintain design intent. • Automation – Drive actions through the system with minimal user input, which removes the mundane and enables a focus on value-added operations. WHAT’S NEW IN SMART 3D SMARTPLANT® 3D, SMARTMARINE® 3D, AND SMARTPLANT 3D MATERIALS HANDLING EDITION P&ID INTEGRATION Integration between Smart 3D and SmartPlant P&ID has been greatly enhanced in the new version, promoting better quality and higher productivity. With the new version of Smart 3D, it is possible to partition a single P&ID pipe run or pipeline into many physical pipe runs or pipelines in the Smart 3D realm and still maintain consis- tency between all of the entities through the “One to Many Correlation” functionality. In addition, the designer has granular control to turn off the propagation of desired properties from SmartPlant P&ID to Smart 3D using the “Selective Property Update” feature. If minor inconsistencies exist between the P&ID and the 3D model, they can be accepted with the “Approve Correlation Inconsistencies” feature. Plus, the “Automatic Correlation” functionality has been upgraded. User-configurable rules and the topologies of the P&ID and 3D pipe runs help you achieve a higher degree of cor- relation between the P&ID and 3D domains. 3D INTEROP Smart 3D continues to bolster its ability to bring external 3D data into projects through enhancements to its powerful 3D Interop functionality. Integrating the proven SmartPlant Review engine, this technology continues to expand its support for a wide array of 3D formats, including multiple versions of SmartMarine and SmartPlant 3D, PDS® 3D, PDMS, SAT, MicroStation, and AutoCAD® . New features in 3D Interop include the ability to clash externally generated 3D data- sets against one another in a single project. With this capability, datasets generated from multiple sites can be checked for interferences against one another in a single Smart 3D project. The latest version of Smart 3D also offers the ability to create and persist intelligent connections to referenced datasets. For example, designers can connect piping to equipment nozzles referenced from another 3D application so that the proper bolt sets and gaskets are assigned and reported via the appropriate MTO deliverables. DELIVERABLES The latest release offers improvements for generating project deliverables. Copy, move, and rotate views to speed up and simplify drawing composition and edits. Automatically display equipment centerlines to improve productivity. Take advantage of integration with Intergraph Batch Services for greater control and flexibility when submitting batch jobs. The batch server does not need to be logged in and the updating account does not need to be the administrator. MicroStation is no longer needed for batch processing, and the batch server is not restricted to a single site. Users can control which server performs the update. You can request email
- 2. ABOUT INTERGRAPH Intergraph is the leading global provider of engineering and geospatial software that enables customers to visualize complex data. Businesses and governments in more than 60 countries rely on Intergraph’s industry-specific software to organize vast amounts of data to make processes and infrastructure better, safer and smarter. The company’s software and services empower customers to build and operate more efficient plants and ships, create intelligent maps, and protect critical infrastructure and millions of people around the world. Intergraph operates through two divisions: Process, Power & Marine (PP&M) and Security, Government & Infrastructure (SG&I). Intergraph PP&M provides enterprise engineering software for the design, con- struction, operation and data management of plants, ships and offshore facilities. Intergraph SG&I provides geospatially powered solutions, including ERDAS technologies, to the public safety and security, defense and intelligence, government, transportation, photogrammetry, and utili- ties and communications industries. Intergraph Government Solutions (IGS) is a wholly owned subsidiary of Intergraph Corporation responsible for the SG&I U.S. federal business. Intergraph is part of Hexagon (Nordic exchange: HEXA B; www. hexagon.com), a leading global provider of design, measurement, and visualization technologies that enable customers to design, measure and position objects, and process and present data. For more information, visit www.intergraph.com. © 2010-13 Intergraph Corp. All rights reserved. Intergraph is part of Hexagon. Intergraph, the Intergraph logo, SmartPlant, and SmartMarine are registered trademarks of Intergraph Corp. or its subsidiaries in the United States and in other countries. Other products and brand names are trademarks of their respective owners. 05/13 PPM-US-0164B-ENG notifications which contain a summary of errors encountered with logs attached. Document revision improvements help users create custom revision marks to meet company and client standards. You can delete and bulk-edit revision records to improve productivity. OFFSHORE Smart 3D continues to extend its 3D modeling capabilities to address the needs of the offshore design and fabrication industry. Specialized Advanced Plate Systems (APS) can quickly and efficiently be created or modified to model complex nodal connections composed of ring plates, continuity plates, base plates, transition plates, cap plates, and more. Shape and position are driven topologically by one or more supporting members and a set of governing dimensional param- eters. Should the supporting members or parameters be modified in subsequent design operations, the advanced plates are automatically updated to reflect the changes. A rich set of APS macros are delivered with the out-of-the-box catalog, enabling new customers to get up to speed quickly with lower upfront implementation costs and shorter implementation schedules. This content can also serve as the basis for developing new content to address business-specific standards, if needed. Other enhancements have been aimed at enabling these Advanced Plates to be inserted into the flanges and/or webs of designed mem- bers, face plates reinforcing the edges of plates, and the flanges and/ or webs of standard, rolled members. These operations result in the creation of the proper geometry shape and the connections between the various structural objects so that features and welds are automati- cally created when the structural objects are detailed. Deliverable data such as drawings and reports and manufacturing output to drive shop- floor automation and robotic work cells are supported and generated automatically from the 3D model. New upgrades enable endcuts to be applied to the various configura- tions of member-to-member connections, typical in offshore projects. The underlying architectural framework was re-factored so that the sys- tem can apply the same endcuts designed, implemented, and delivered for shipbuilding stiffeners to be applied to topside members. Maximize content reuse and reduce implementation costs and schedules. SMARTPLANT 3D MATERIALS HANDLING EDITION The latest release of SmartPlant 3D Materials Handling Edition offers many new functionalities. There are updates to chute plate work for full detailing. Users can create a chute assembly as a single plate system. Using the split command, they can then split the single plate into real-life fabrication sections. Take advantage of the capability to bound plate work using single plate and refer- ence line. Industry updates to profile end treatment cover flat plate, angle, C section, and Z section. The software offers enhanced fastener placement. Through a simple form interface, chute flanges can be selected for layout of bolt hole penetration. Supplied reports detail the type of bolt and quantities for MTO reporting. With conveyor layout, updates to the chute shapes capability enable conveyor layout to any angle. Additional placement points promote curve truss and gantry placement. There are also updates to the internal 2D workflow. The new profile and data drawing template enables users to update bills of materials to reflect their company standards. Plus, take advantage of enhanced CIS/2 output. Chute profiles and flanges are exported to the detailing package through the CIS/2 standard interface. SMART 3D BUNDLE LICENSING Smart 3D bundle licensing is now available. You can choose to run SmartPlant 3D, SmartMarine 3D, or SmartPlant 3D Materials Handling Edition on SQL server. Take advantage of the benefits of Smart 3D bundle licensing, such as: • Reduced administrative costs. • Additional features for the plant market by running the marine product. • Built-up members. • Construction management.