smrf
0 likes308 views
This document is a special material request form listing various materials needed including thermal blocks, personnel doors, windows, flashing, fasteners, beams, coils, and insulation with notes on order lead times, required dimensions, and shipping addresses for the materials. It provides details on quantities, sizes, grades, and other specifications for the requested items. The form requires signatures and includes notes that orders must be received by purchasing within certain timeframes before scheduled shipping weeks.
smrf
- 1. SPECIAL MATERIAL REQUEST FORM Thermal Block (5/21/2015) Job No.: Fab Week: Detailer: Ext: EDDIE REYEZ Ext: CSC: Ext: N PRELIMINARY X FINAL REVISION Order request shipping to the plant MUST be received by Purchasing 2 weeks prior to fab week Nominal Insulation Thickness (over purlin) Nominal Insulation Thickness (over purlin) Nominal Insulation Thickness (over purlin) Thermal Block Size Required (T X W X L) Thermal Block Size Required (T X W X L) Thermal Block Size Required (T X W X L) Comments: JENNIFER HARKNESS CSC Loc.: Checker: EL PASO, IL 11/4/2015M15N0508A Date: 11/22/2015 Ship Week: SHIP TO ADDRESS COUNTRY FRESH MEATS 12/4/2015 9902 WESTON AVE WESTON, WI 54476 EL PASO, IL 1427DONGZE DI Det. Loc.: Contact: TROY SCHWABENLANDER EL PASO, IL 1403 Phone: (920)766-5795Chk. Loc.: Quantity Thickness 1524 Rev # BUY AMERICAN REQUIRED (This selection must be confirmed for SMRF to be accepted by the ABC Purchasing Department) R-19, 6 1/2 In. 354 1"3/8 3" 23"1/2 Standing Seam II / 360 Roof Panel 16" Wide Loc Seam Panel 12" Wide Loc Seam Panel Width Length Mark. No. (if applicable) R-10, 3 1/4 In. 1 1/4 X 3 X 23 1/2 (SMRF REQUIRED) TB2T (NO SMRF REQUIRED)
- 2. SPECIAL MATERIAL REQUEST FORM "Premium" Pre-assembled Personnel Door (8/31/2015) (PKDD Packages) Job No.: Fab Week: Detailer: Ext: Ext: CSC: Ext: N PRELIMINARY X FINAL REVISION Rev # All fire doors must have a closer to meet requirements. Ball-bearing hinges are standard. ** Notes: (1.) All doors are 18 GA., textured. (2.) Standard offerings are listed in the selection boxes - all other options must be noted at "Comments". (3.) Sub-jamb width = 8 1/4", length = 7'-0 5/8". Wire glass is available for fire doors only (note at "Comments" when required.) There Is a 2 week lead time prior to job shipping. S/S Hinge 1 A (LHO) No 2 3 4 5 6 7 8 9 10 Comments: Swing Chart No El Paso, IL Closer Unit Price Contact: M15E0419A Date: 10/14/2015 11/1/2015 Ship Week: 11/13/2015 SHIP TO ADDRESS EL PASO PLANT Size Latch Guard Qty. 1 Dongze Di Det. Loc.: 1427 Checker: Kristen Guisti Chk. Loc.: El Paso, IL 1407 Swing Panel L3P Lockset (Hardware) HM = Lever Handle Mortise Lockset All Doors to be Keyed Alike 3070 Color White BUY AMERICAN REQUIRED (This selection must be confirmed for SMRF to be accepted by the ABC Purchasing Department) Door Keys : Door Type Standard Builder Clarification Form Double click on picture to open up a .pdf Leaf SD = Solid (Flush) Phone: El Paso, IL 1528Chris Meller CSC Loc.: DI (RHI)(LHI) CIBI (RHI)(LHI) AI E (Both leaves Out) OUTSIDE OF BUILDING A (LHO) (RHO) B C (LHO) (RHO) D
- 3. SPECIAL MATERIAL REQUEST FORM Accessories, Roof Jax Flexible Flashing (x/x/2015) Job No.: Fab Week: Detailer: Ext: Ext: CSC: Ext: N PRELIMINARY X FINAL REVISION Orders requesting shipping to the plant MUST be received by Purchasing 2 weeks prior to fab week. Note: Each roll of Flexible Flashing contains 2 termination strips. Comments: #802 (2" to 7 1/4")#16 (16" to 24") #8 (7" to 13") #9 (10" to 13" BUY AMERICAN REQUIRED (This selection must be confirmed for SMRF to be accepted by the ABC Purchasing Department) #803 (3/4" to 10") #5 (4" to 7") #3 (1/4" to 4") Quantity 3 Regular High Temperature Red SizeQuantity Rev # QuantitySize Retrofit-Grey M15G0440A Date: 9/30/2015 10/4/2015 Ship Week: 1515Mike Zimmerman Contact: Phone:Checker: Jordan Marti Chk. Loc.: El Paso, IL 1416 10/23/2015 Dongze Di Det. Loc.: El Paso, IL 1427 SHIP TO ADDRESS EL PASO PLANT CSC Loc.: El Paso, IL #801 (3/4" to 2 3/4") Roof Jax: #9 (10" to 18") Size 18"x50' 7"x75' 9"x75' Flexible Flashing: Size Quantity
- 4. SPECIAL MATERIAL REQUEST FORM Fasteners (4/4/2014) Job No.: Fab Week: Detailer: Ext: Ext: CSC: Ext: N PRELIMINARY X FINAL REVISION Minimum order 250 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Dawn Davis CSC Loc.: M15P0383A Date: 8/16/2015 Ship Week: Dongze Di Det. Loc.: Checker: El Paso, IL SHIP TO ADDRESS 1519 BUY AMERICAN REQUIRED (This selection must be confirmed for SMRF to be accepted by the ABC Purchasing Department) 8/21/2015 Contact: Rev # EL PASO PLANT 9/18/2015 El Paso, IL 1427 Phone:Chk. Loc.: Orders requesting shipping to the plant MUST be received by Purchasing 2 weeks prior to fab week. Description Comments: Quantity 250 #12X1 1/2 SDHHT5 ColorType Wall Fastener POWH
- 5. SPECIAL MATERIAL REQUEST FORM Thermal Break Windows (x/xx/2014) (PKDN Packages) Job No.: Fab Week: Detailer: Ext: 1427 Contact: Checker: Ext: 130 Phone: CSC: Ext: 1519 N PRELIMINARY X FINAL REVISION Rev # 1. Windows ordered without subframes are "self-framing". Select the Long Span III or Architectural III/"V" Rib jamb fin to match the wall panel type or Flat fin for Insulated or Flat Wall Panels. Shadow Panel Walls Must use Universal jamb fin. Windows can also be ordered without jamb fins for MASONRY applications. 2. *Sub-Frames (by Window Manufacturer) are only available with the Universal Jamb Fin, which can accommodate any standard 1 1/4" wall panel type. 3. Windows ordered without sub-frames must be installed on 12" centers (Except Shadow Panel, 16" centers). Windows ordered with sub-frames (by Window Manufacturer) have the flexibility of being installed anywhere along the wall panel because of the Universal Jamb Fin. Shadow Panel windows DO NOT require the use of sub-frames. 4. If windows are to be installed at Insulated or Flat Wall Panels specify panel thickness. 5. Shadow Panel windows are 43.25" x 33.82", Universal Fin allows window out to out dimension to be 48". 6. There is a 3 week lead time prior to job shipping (Additional 2 week lead time for White). 8 White *Sub-Frames supplied by Window Manufacturer* Special Conditions: Sub-total: Discount: Sub-total: Tax: S&H: Total: 8/12/2015 9/4/2015 El Paso, IL Jamestown, OH El Paso, IL Sub-Frame Req'd Girt Spacing Lower Girt Height If Sub-Frame is required (Fill in boxes below) 3'6 7'6 0' Option A B C D Sill Height Wall Panel Architectural IIIYes Jambs attach to Finished Floor. SHIP TO ADDRESS Qty *Sub-Frame Dawn Davis 8/16/2015 Dongze Di Steve Dailey El PASO PLANT Universal CSC Loc.: Date: Color Jamb Fin Chk. Loc.: BUY AMERICAN REQUIRED (This selection must be confirmed for SMRF to be accepted by the ABC Purchasing Department) Size / Girt Depth Window Type Ship Week: Det. Loc.: M15G0328A 8" Insulated Wall Panel Thickness (If Req'd) Unit PriceSize 4' x 3'Horizontal Sliding Window Sub-Frame Spacing Info A
- 6. SPECIAL MATERIAL REQUEST FORM Angle, Tubing & Pipe (3/30/2012) Job No.: Fab Week: Detailer: Ext: Ext: CSC: Ext: N PRELIMINARY X FINAL REVISION Items must be delivered prior to "In Plant" date Order request shipping to the plant MUST be received by Purchasing 2 weeks prior to load week Angle: 1 X X X 2 X X X 3 X X X 4 X X X 5 X X X 6 X X X 7 X X X 8 X X X Tubing: 1 X X X 2 X X X 3 X X X 4 X X X 5 X X X 6 X X X 7 X X X 8 X X X Pipe: 1 X X 2 X X 3 X X 4 X X 5 X X 6 X X 7 X X 8 X X Comments: BUY AMERICAN REQUIRED (This selection must be confirmed for SMRF to be accepted by the ABC Purchasing Department) 1519 Rev # (in.) Grade Qty GradeGrade 46 Grade Phone: SHIP TO ADDRESS DAWN DAVIS CSC Loc.: EL PASO EL PASO 1427 Contact: Checker: SCOTT BAKER Chk. Loc.: EL PASO 1411 M15P0258A Date: 7/23/2015 8/2/2015 Ship Week: 9/4/2015 EL PASO PLANTDONGZE DI Det. Loc.: (ft.) Dim 1 8 23' Wall Thk. Qty (ft.) (in.)(ft.) (in.) Thk. Thk. Length: Qty Dim 2Dim 1Grade Length: (ft.) (in.) Dim 2 9 3/8 Qty Length: Dim 1 Dim 1 Dim 2 Wall Thk. Length: (ft.) (in.) Dim 2 Wall Thk. Length: Qty 6 1/4 1 (OD) Outside Diameter Wall Thk. Grade (OD) Outside Diameter Length: Qty (ft.) (in.)
- 7. Beam and Channel - W, S, C and MC (3/30/2012) Fab Week: Ext: 1427 Contact: Ext: 1422 Phone: Ext: 1519 N PRELIMINARY X FINAL REVISION Rev # Items must be delivered prior to "In Plant" date Order request shipping to the plant MUST be received by Purchasing 2 weeks prior to load week Weight Min. Yield Weight Min. Yield Per Ft. Strength (KSI) Ft. In. Per Ft. Strength (KSI) Ft. In. 1 W 10 X 12 50 X 24 8 2 2 W 10 X 12 50 X 39 11 1/4 3 W 10 X 12 50 X 34 4 X X 5 X X 6 X X 7 X X 8 X X 9 X X 10 X X 11 X X 12 X X 13 X X 14 X X 15 X X 16 X X 17 X X 18 X X 19 X X 20 X X 21 X X 22 X X 23 X X 24 X X 25 X X 26 X X 27 X X 28 X X 29 X X 30 X X 31 X X 32 X X 33 X X 34 X X 35 X X 36 X X 37 X X 38 X X 39 X X 40 X X 41 X X 42 X X 43 X X 44 X X 45 X X 46 X X Comments: El Paso LengthLength Qty Shape SPECIAL MATERIAL REQUEST FORM El Paso M15G0330A 8/2/2015 Dongze Di Det. Loc.: Ship Week: Date: 7/22/2015 8/21/2015 Beam and Channel: EL PASO PLANTDetailer: Job No.: Checker: Shape Depth Chk. Loc.: BUY AMERICAN REQUIRED (This selection must be confirmed for SMRF to be accepted by the ABC Purchasing Department) Depth El PasoCSC Loc.:Dawn Davis Lorie Snyder CSC: 2 Qty 2
- 8. SPECIAL MATERIAL REQUEST FORM Coil, Panel - Flashing (5/31/2013) Job No.: Fab Week: Detailer: Ext: Ext: CSC: Ext: N PRELIMINARY X FINAL REVISION There is a 3 to 4 week lead time for standard colors. There is a 4 to 5 week lead time for custom colors. Orders requesting shipping to the plant MUST be received by Purchasing 3 weeks / 5 weeks prior to load week. Comments: 20 3/4 20 3/4 CS Type B LTBZ 26 Ga. 500 CS Type B LTST 26 Ga. 1920 Flashing: Gauge Linear Feet Grade Color Color No.Coil Width Color LTST LTBZ80 KSI Gauge 26 Ga. Color No. 0014 0008 Panel Coil: A3P L3P Panel Type 1700 14026 Ga. Linear Feet Contact: Rev # Grade 80 KSI DONGZE DI Det. Loc.: JAMESTOWN,OH 127 Phone: 7/27/2015 EL PASO, IL 1427 6/2/2015 SHIP TO ADDRESS 1524 M15N0247A Date: 7/19/2015 Ship Week: EL PASO PLANT Checker: EL PASO, IL BUY AMERICAN REQUIRED (This selection must be confirmed for SMRF to be accepted by the ABC Purchasing Department) DAN PRICE Chk. Loc.: JENNIFER HARKNESS CSC Loc.:
- 9. SPECIAL MATERIAL REQUEST FORM Insulation (4/4/2014) Job No.: Fab Week: Detailer: Ext: Ext: CSC: Ext: N PRELIMINARY X FINAL REVISION Erection drawings MUST be included with material request to Purchasing. There is a 4 week lead time. Building Dimensions: Standard Blanket Insulation of OptiLiner - Banded Liner System Single Slope or Ridge: Tabs: M15B0198A Date: 5/24/2015 Ship Week: Dongze Di Det. Loc.: 6/5/2015 4148 Rockingham Circle 5/4/2015 SHIP TO ADDRESS RC Autobody Checker: Saint George, KS 66535 EL PASO, IL 1424 Scott Baker Chk. Loc.: 1411 EL PASO, IL Contact: Rick Dulaney Phone: 785 537 9789EL PASO, IL Comments: 60' Facing Type: (If Needed-See Job File) PSP Eave to Eave 4' Facing Color: Width: Roof Cut: 6' 4' Roof Pitch: (If Needed-See Job File) 6" Starter Roll Width: 4 to 12 Thickness: BUY AMERICAN REQUIRED (This selection must be confirmed for SMRF to be accepted by the ABC Purchasing Department) Rev # 1 1505 Width: David Baxter 12' Length: CSC Loc.: Building: 40' Eave Height: 1 Ridge 6' 4" Roof: Walls: White Thickness: Width: 1 Tab @ 6" (one side only) WMP-VR-R Plus® Poly Scrim Poly Starter Roll Width: Insulation Nomenclature