Soil question by me
Download as DOCX, PDF1 like339 views
This document contains questions related to soil mechanics for preparation for a government job. It covers topics such as bearing capacity, factors affecting bearing capacity, types of piles, conditions requiring pile foundations, consistency limits, grain size distribution curves, compaction curves, compaction methods, standard penetration testing, settlement, slope failures, load distribution, and field and laboratory soil tests. Definitions and explanations are requested for key terms as well as sketches and drawings of concepts in soil mechanics.
Soil question by me
- 1. SOIL question for govt. job prepation 1) What do you mean by bearing capacity. How it can be improved. 2) Write down bearing capacity equation & also define different parameters in bearing capacity equation 3) What are the factor affecting the bearing capacity of foundation 4) What is pile & write down the different type of pile 5) What do you mean by end bearing pile & friction pile 6) In which condition pile foundation are needed? 7) What do you mean by block diagram? 8) What do you mean by consistency limit. Write down different type of consistency limit. 9) Draw the consistency limit curve. 10) What is GSD curve? Uses of GSD curve. 11) Different co-efficient of GSD curve. 12) Draw the qualitative GSD curve for following i) Pooly graded ii) Well graded iii) Gap graded iv) Uniform graded 13) Define compaction curve? What is zero air void line & OMC i) Draw different compaction curve for different soil ii) Draw compaction curve of a sandy soil clay on the effect of compaction energy 14) Write down difference between compaction & consolidation 15) Write down the different compaction methods & compaction equipment. 16) What are the factors affecting the compaction of soil 17) What do you mean by Relative compaction 18) Write down the notes about SPT 19) Write down the different correction to SPT value 20) Write down difference between SPT & MPT 21) What is N-value?how it can be corrected. 22) What do you mean by N.C.C and O.C.C 23) Draw e – log(p) curve 24) Write down the different types of settlement 25) Write down the different types of slope failure with sketch 26) Show load distribution on cohesive soil and cohesionless soil. 27) Write five field test & five laboratory test of soil 28) Wrte short note on i) Quick sand ii) Mat foundation iii) Wall foundation iv) Over consolidation ratio.