SOLAR TREE technical seminar report doc

VISVESVARAYA TECHNOLOGICAL UNIVERSITY
"JnanaSangama", Belagavi: 590 018
A Technical Seminar on
“SOLAR TREE”
Submitted in partial fulfillment of the requirements of the degree of
BACHELOR OF ENGINEERING
In
ELECTRICAL AND ELECTRONICS ENGINEERING
For the academic year
2015-2016
By
MOHSIN KHAN(1AY13EE413)
Under the guidance of
Mr. KESARI HANUMANTHU
Assistant Professor
DEPARTMENT OFELECTRICAL AND ELECTRONICS
ENGINEERING
ACHARYA INSTITUTE OF TECHNOLOGY
Acharya Dr. SarvepalliRadhakrishnan Road, Acharya Post Office, Bengaluru,
Karnataka 560107

2
ACHARYA INSTITUTE OF TECHNOLOGY
Acharya Dr. SarvepalliRadhakrishnan Road, Acharya Post Office
Bengaluru,Karnataka 560107,
DEPARTMENT OF
ELECTRICAL AND ELECTRONICS ENGINEERING
Year 2015-2016
CERTIFICATE
This is to Certified that the Technical Seminar work entitled “SOLAR TREE” is a
bonafide work carried out by MOHSIN KHAN (1AY13EE413) in partial fulfillment for the
award of the degree of Bachelor of Engineering in Electrical and Electronics of the
Visvesvaraya Technological University, Belgaum during the academic year 2015-16. It is
certified that all corrections/suggestions indicated for the Internal Assessment have been
incorporated in the report deposited in the departmental library. The seminar report has been
approved as it satisfies the academic requirements in respect of technical seminar work
prescribed for Bachelor of Engineering Degree.
Signature of the Guide Signature of the HOD
Mr. Kesari Hanumanthu Prof. R. Vivekananda
Assistant Professor Head Of Department

3
ACKNOWLEDGEMENT
I am indebted to our Principal, Dr. H.D. Maheshappa, for facilitating a congenial academic
environment in the College.
Iamgrateful to our HOD, Prof.R.Vivekananda,, for his kind support, guidance and
motivation during the B.E Degree Course and especially during the Course of our Technical
seminar.
I thank our Guide Mr.KesariHanumanthu,for his valuable guidance, Suggestions and
Encouragement throughout our Technical Seminar.
I also thank all the staff members of the Department Electrical and Electronics
Engineeringand all those who have directly or indirectly helped us with their valuable
suggestions in the successful completion of this Technical Seminar.
Mohsin Khan
(1AY13EE413)

4
ABSTRACT
Now a days with the growing population and energy demand we should take a
renewable option of energy source and also we should keep in mind that energy should not
cause pollution and other natural hazards.
In this case the solar energy is the best option for us.
India is a highly populated country, so we should take the advantage of such an energy which
requires a very less space to produce energy efficiently. In this case solar tree could be the
best one for us.
We can also use the technique called “SPIRALLING PHYLLATAXY” to improve the
efficiency of the plant. It can be applied in street lightening system, industrial power supply
etc. It is much better than the traditional solar PV system in area point of view and also more
efficient. So this will be a very good option and should be implemented.
However the main problem associated with tapping solar energy is the requirement to install
large solar collectors requires a very big space. To avoid this problem we can install a solar
tree in spite of a no of solar panels which require a very small space.

5
CONTENTS
CHAPTER-1: Introduction 6-8
1.1What is a solar tree
1.2Spirallingphyllataxy
1.3 Introduction about solar cell
CHAPTER-2:WorkingPrinciple 9-11
2.1 How solar cell works
2.2 Impurity Silicon (Extrinsic): P-type and N-type Semiconductors
2,3Formation of Potential Barrier and Photoelectric Effect
CHAPTER-3:Manufacturing Technology 12-16
3.1 Purification of silicon8
3.2 Ingot and wafer preparation
3.3 Doping
3.4 Screen Printing
3.5 Stringing & Tabbing
3.6 Antireflective Coating
3.7 Module Manufacturing
CHAPTER-4:Advantages of solar panel 17
CHAPTER-5: Construction & Working 18-19
CHAPTER-6:Why it is better than a Traditional system 20
CHAPTER-7:Applications, advantages& disadvantages 23
Summary and Conclusion 22
References 23

6
CHAPTER 1
INTRODUCTION
It is a form of renewable energy resource that is some measure competitive with
fossil fuels. Hydro power is the force of energy of moving water. It provides about 96% of
the renewable energy in the united state. Hydro electric power plants do not use any
resources to create electricity or they do not pollute the air. The sun is a hydrodynamic
spherical body of extremely hot ionized gases(plasma), generating energy by the process
of the thermonuclear fusion. The temperature of interior of sun is estimated at 8*10^6 k to
40*10^6 k, where energy is released by fusion of hydrogen and helium.
Solar energy is available in abundance and considered as the easiest and cleanest means of
tapping the renewable energy. For direct conversion of solar radiation into usable form,
the routes are: solar thermal, solar photovoltaic and solar architecture. However the main
problem associated with tapping solar energy is the requirement to install large solar
collectors requires a very big space. To avoid this problem we can install a solar tree in
spite of a no of solar panels which require a very small space.
Solar tree is a revolutionary urban lighting concept that represents a perfect symbiosis
between pioneering design and cutting-edge eco-compatible technology. Solar Tree opens up
new prospects for urban lighting in that it satisfies today’s most pressing environmental,
social, cultural and aesthetic demands. The ability to combine innovative design with
advanced technology, along with an acute sensitivity to environmental concerns make
Artemide the ideal vehicle for the development of this project conceived by Ross
Lovegrovewith the collaboration of Sharp Solar, the world’s leading manufacturer of solar
cells.

7
1.1 WHAT IS A SOLAR TREE
A solar tree is a decorative means of producing solar energy and also electricity. It
uses multiple no of solar panels which forms the shape of a tree. The panels are arranged in a
tree fashion in a tall tower/pole.
TREE stands for
T= TREE GENERATING
R=RENEWABLE
E=ENERGY and
E=ELECTRICITY
This is like a tree in structure and the panels are like leaves of the tree which produces
energy.
1.2 SPIRALLING PHYLLATAXY
It is a technique used in designing of solar tree. It provides the way to help the
lower panels from the shadow of upper ones, so that it can track maximum power from
sun.
SOLAR TREES

8
1.3 INTRODUCTION ABOUT SOLAR CELL
A solar cell (photovoltaic cell or photoelectric cell) is a solid state electrical device
that converts the energy of light directly into electricity by the photovoltaic effect. The
energy of light is transmitted by photons-small packets or quantum of light. Electrical energy
is stored in electromagnetic fields, which in turn can make a current of electrons flow.
Assemblies of solar cells are used to make solar modules which are used to capture energy
from sunlight. When multiple modules are assembled together (such as prior to installation on
a pole-mounted tracker system), the resulting integrated group of modules all oriented in one
plane is referred as a solar panel. The electrical energy generated from solar modules, is an
example of solar energy. Photovoltaic is the field of technology and research related to the
practical application of photovoltaic cells in producing electricity from light, though it is
often used specifically to refer to the generation of electricity from sunlight. Cells are
described as photovoltaic cells when the light source is not necessarily sunlight. These are
used for detecting light or other electromagnetic radiation near the visible range

9
CHAPTER 2
WORKING PRINCIPLE
2.1 HOW SOLAR CELL WORKS
Solar cells, which largely are made from crystalline silicon work on the principle of
Photoelectric Effect that this semiconductor exhibits. Silicon in its purest form- Intrinsic
Silicon- is doped with a dopant impurity to yield Extrinsic Silicon of desired characteristic (p-
type or n-type Silicon).When p and n type silicon combine they result in formation of
potential barrier.
Working of Solar cells can thus be based on two crystalline structure
 Intrinsic Silicon
 Extrinsic Silicon
Pure Silicon (Intrinsic) Crystalline Structure
Silicon has some special chemical properties, especially in its crystalline form. An
atom of silicon has 14 electrons, arranged in three different shells. The first two shells-
which hold two and eight electrons respectively- are completely full. The outer shell,
however, is only half full with just four electrons (Valence electrons). A silicon atom will
always look for ways to fill up its last shell, and to do this, it will share electrons with four
nearby atoms. It's like each atom holds hands with its neighbours except that in this case,
each atom has four hands joined to four neighbours. That's what forms the crystalline
structure. The only problem is that pure crystalline silicon is a poor conductor of
electricity because none of its electrons are free to move about, unlike the electrons in
more optimum conductors like copper

10
2.2 Impurity Silicon (Extrinsic): P-type and N-type
Semiconductors
Extrinsic silicon in a solar cell has added impurity atoms purposefully mixed in with
the silicon atoms, maybe one for every million silicon atoms. Phosphorous has five electrons
in its outer shell. It bonds with its silicon neighbor atoms having valency of 4, but in a sense,
the phosphorous has one electron that doesn't have anyone to bond with. It doesn't form part
of a bond, but there is a positive proton in the phosphorous nucleus holding it in place. When
energy is added to pure silicon, in the form of heat, it causes a few electrons to break free of
their bonds and leave their atoms. A hole is left behind in each case. These electrons, called
free carriers, then wander randomly around the crystalline lattice looking for another hole to
fall into and carry an electrical current. In Phosphorous-doped Silicon, it takes a lot less
energy to knock loose one of "extra" phosphorous electrons because they aren't tied up in a
bond with any neighboring atoms. As a result, most of these electrons break free, and
release a lot more free carriers than in pure silicon. The process of adding impurities on
purpose is called doping, and when doped with phosphorous, the resulting silicon is called N-
type ("n" for negative) because of the prevalence of free electrons. N-type doped silicon is a
much better conductor than pure silicon. The other part of a typical solar cell is doped with
the element boron, which has only three electrons in its outer shell instead of four, to become
P-type silicon. Instead of having free electrons, P-type ("p" for positive) has free openings
and carries the opposite positive charge
2.3 Formation of Potential Barrier and Photoelectric Effect
The electric field is formed when the N-type and P-type silicon come into contact.
Suddenly, the free electrons on the N side combine the openings on the P side. Right at the
junction, they combine and form something of a barrier, making it harder and harder for
electrons on the N side to cross over to the P side (called POTENTIAL BARRIER).
Eventually, equilibrium is reached, and an electric field separating the two sides is set up.
This electric field acts as a diode, allowing (and even pushing) electrons to flow from the P
side to the N side, but not the other way around. It's like a hill -- electrons can easily go down
the hill (to the N side), but can't climb it (to the P side).

11
When light, in the form of photons, hits solar cell, its energy breaks apart electron-
hole pairs(Photoelectric effect). Each photon with enough energy will normally free exactly
one electron, resulting in a free hole as well. If this happens close enough to the electric field,
or if free electron and free hole happen to wander into its range of influence, the field will
send the electron to the N side and the hole to the P side. This causes further disruption of
electrical neutrality, and if an external current path is provided, electrons will flow through
the path to the P side to unite with holes that the electric field sent there, doing work for us
along the way. The electron flow provides the current, and the cell's electric field causes a
voltage.
The final step is to install something that will protect the cell from the external elements-
often a glass cover plate. PV modules are generally made by connecting several individual
cells together to achieve useful levels of voltage and current, and putting them in a sturdy
frame complete with positive and negative terminals.

12
CHAPTER 3
MANUFACTURING TECHNOLOGY & PROCESS
OF SLAR CELL
3.1 STEP 1 - PURIFICATION OF SILICON:
The basic component of a solar cell is intrinsic silicon, which is not pure in its natural
state. To make solar cells, the raw materials—silicon dioxide of either quartzite gravel or
crushed quartz—are first placed into an electric arc furnace, where a carbon arc is applied to
release the oxygen. A Graphite and Thermal insulator trap the heat and maintain the furnace
at required temperature for gangue (impurity) to form a slag. The products are carbon dioxide
and molten silicon. Silicon ingot is pulled down from the molten silicon using seed silicon
crystallization and floating zone technique. Passing impure silicon in same direction several
times that separates impurities- and impure end is later removed. This process yields silicon
with one percent impurity, useful in many industries but not the solar cell industry. At this
point, the silicon is stillnot pure enough to be used for solar cells and requires further

13
purification. Pure silicon is derived from such silicon dioxides as quartzite gravel (the purest
silica) or crushed quartz.
3.2 STEP 2- INGOT AND WAFER PREPARATION:
Solar cells are made from silicon boules, polycrystalline structures that have the
atomic structure of a single crystal. The most commonly used process for creating the boule
is called the Czochralski method. In this process, a seed crystal of silicon is dipped into
melted polycrystalline silicon. As the seed crystal is withdrawn and rotated, a cylindrical
ingot or "boule" of silicon is formed. The ingot withdrawn is unusually pure, because
impurities tend to remain in the liquid. From the boule, silicon wafers are sliced one at a time
using a circular saw whose inner diameter cuts into the rod, or many at once with a multi wire
saw. Only about one-half of the silicon is lost from the boule to the finished circular wafer—

14
more if the wafer is then cut to be rectangular or hexagonal. Rectangular or hexagonal wafers
are sometimes used in solar cells because they can be fitted together perfectly, thereby
utilizing all available space on the front surface of the solar cell. The wafers are then polished
to remove saw marks.
3.3STEP3 - DOPING:
The traditional way of doping silicon wafers with boron and phosphorous is to
introduce a small amount of boron during the Czochralski process. The wafers are then sealed
back to back and placed in a furnace to be heated to slightly below the melting point of
silicon (2,570 degrees Fahrenheit or 1,410 degrees Celsius) in the presence of phosphorous
gas. The phosphorous atoms "burrow" into the silicon, which is more porous because it is
close to becoming a liquid. The temperature and time given to the process is carefully
controlled to ensure a uniform junction of proper depth. These diffusion processes are usually
performed through the use of a batch tube furnace or an in-line continuous furnace.The basic
furnace construction and process are very similar to the process steps used by packaging
engineers.
3.4 STEP 4 - SCREEN PRINTING:
Electrical contacts are formed through squeezing a metal paste through mesh screens to
create a metal grid. This metal paste (usually Ag or Al) needs to be dried so that subsequent
layers can be screen-printed using the same method. As a last step, the wafer is heated in a

15
continuous firing furnace at temperatures ranging from 780 to 900°C. These grid- pattern
metal screens act as collector electrodes that carry electrons and complete the electrical
continuity in the circuit.
3.5 STEP 5 - STRINGING AND TABBING:
Electrical contacts connect each solar cell to another and to the receiver of produced
current. The contacts must be very thin (at least in the front) so as not to block sunlight to the
cell. Metals such as palladium/silver, nickel, or copper are vacuum-evaporated After the
contacts are in place, thin strips ("fingers") are placed between cells. The most commonly
used strips are tin-coated copper.
3.6 STEP 6 - ANTIREFLECTIVE COATING:

16
3.7 STEP 7 - MODULE MANUFACTURING
The finished solar cells are then encapsulated; that is, sealed into silicon rubber or
ethylene vinyl acetate. Solar module assembly usually involves soldering cells together to
produce a 36-cell string (or longer) and laminating it between toughened glass on the top and
a polymeric backing sheet on the bottom. The encapsulated solar cells are then placed into an
aluminum frame that has a Mylar or tedlarback sheet and a glass or plastic cover. Frames are
usually applied to allow for mounting in the field, or the laminates may be separately
integrated into a mounting system for a specific application such as integration into a
building.
Because pure silicon is shiny, it can reflect up to 35 percent of the sunlight. To reduce the
amount of sunlight lost, an anti-reflective coating is put on the silicon wafer- mostly titanium
dioxide, silicon oxide and some others are used. The material used for coating is either heated
until its molecules boil off and travel to the silicon and condense, or the material undergoes
sputtering. In this process, a high voltage knocks molecules off the material and deposits
them onto the silicon at the opposite electrode. Yet another method is to allow the silicon
itself to react with oxygen- or nitrogen-containing gases to form silicon dioxide or silicon
nitride. Commercial solar cell manufacturers use silicon nitride. Another method to make
silicon absorb more light is to make its top surface grained, i.e. pyramid shaped
nanostructures that yield 70% absorption that reaches the cell surface after passing through
anti-reflective coating.

17
CHAPTER 4
ADVANTAGE OF SOLAR PANELS
Private home owners are discovering the benefits to our environment and a way to live
happily off the grid or are considering installing a grid-tied solar power system to offset their
electric bill or due to a belief in reducing their carbon emissions. These are great reasons to
"go solar"...
 Ecologically Friendly - For obvious reasons, the use of solar panels is Eco-friendly
and considered one of the most "green" electricity resources. Because because they
operate by interacting with a renewable energy source, sunlight, there is no fear of
depleting yet another natural resource.
 Decreased Electrical Bill - By switching to solar energy, you will save money on
your electrical bills every month. Even if electricity bills continue raising in the next
few months you will have the peace of mind knowing that your energy source is
based on solar power.
 Low Maintenance - Solar panels have no moveable parts and are very simple to use.
After being set up properly, they do not need to be tinkered with and will continuing
working for many years. In fact, many manufacturers have 25 year warranties on their
panels.
 Efficiency - No matter where you live, the chances are that you can successfully use
solar panels for you electrical needs. They are rugged and are very adaptable to
climate conditions and the latest panel models are efficient enough to work well
without facing directly south and some will even produce electricity under cloud
cover.
Regardless of who you are or what type of home you have, solar power is one of the best
ways to provide you and your family with electricity without causing more damage to our
planet.
There are many ways to take advantage of the savings gained from solar panel systems. Not
only does it help you save by cutting your energy requirement from the utility company, it.

18
CHAPTER 5
CONSTRUCTION AND WORKING
The solar tree consists of some important parts in its design. They are as follows:
 Solar panels
 Long tower
 LDEs
 Batteries
 Stems for connecting the panels
WORKING:
 Batteries are charged during the day time.
 LEDs are automatically switched on
 These are used to indicate how much charge/energy remain left
 Batteries are also used to store the energy so that we can use it at night and in
cloudy days when no sunlight is there.
LEDs
5.1 Light Emitting Diode (LED)
Light Emitting Diode
A light-emitting diode (LED) is a semiconductor light source. LEDs are used as
indicator lamps in many devices and are increasingly used for other lighting. Appearing as
practical electronic components in 1962, early LEDs emitted low-intensity red light, but

19
modern versions are available across the visible, ultraviolet, and infrared wavelengths, with
very high brightness.
Internal Description of LED
When a light-emitting diode is forward-biased (switched on), electrons are able to
recombine with electron holes within the device, releasing energy in the form of photons.
This effect is called electroluminescence and the color of the light (corresponding to the
energy of the photon) is determined by the energy gap of the semiconductor. An LED is often
small in area (less than 1 mm2), and integrated optical components may be used to shape its
radiation pattern.
Internal description of LED
LEDs present many advantages over incandescent light sources including lower energy
consumption, longer lifetime, improved physical robustness, smaller size, and faster
switching. LEDs powerful enough for room lighting are relatively expensive and require
more precise current and heat management than compact fluorescent lamp sources of
comparable output.
Electronic Symbol of LED
Light-emitting diodes are used in applications as diverse as aviation lighting, automotive
lighting, advertising, general lighting, and traffic signals. LEDs have allowed new text, video
displays, and sensors to be developed, while their high switching rates are also useful in
really beadvanced communications technology.

20
CHAPTER 6
WHY IT IS BETTER THAN A TRADITIONAL SYSTEM
India is a highly populated country, so we should take the advantage of such an
energy which requires a very less space to produce energy efficiently. In this case solar tree
could be the best one for us. It is much better than the traditional solar PV system in area
point of view and also more efficient. So this will be a very good option and should be
implemented.
For the traditional system we require large size of land to generate a small amount of power.
It requires about 1% land as compare to the traditional system. Solar energy is available in
abundance and considered as the easiest and cleanest means of tapping the renewable energy.
For direct conversion of solar radiation into usable form, the routes are: solar thermal, solar
photovoltaic and solar architecture. However the main problem associated with tapping solar
energy is the requirement to install large solar collectors requires a very big space. To avoid
this problem we can install a solar tree in spite of a no of solar panels which require a very
small space.
Example – To generate 2 MW power from a pv module we requires 10 -12 acres of land
for housing of panels only but for the same amount of energy we require only 0.10-0.12
acres of land in case of solar tree.
Traditional PV solar System Solar Tree

21
CHAPTER-7
APPLICATIONS, ADVANTAGES&DISADVANTAGES
APPLICATION
 Street light
 House supply
 Industrial power supply
ADVANTAGES
 No air pollution
 We wouldn’t have to worry as much about future energy sources
 People in poor country would have access to electricity
 People can save money
 Land requirement is very less
DISADVANTAGES
 Cost is high
 May cause hazards to the birds and insects
 Hazards to eyesight from solar reflectors

22
SUMMARY AND CONCLUSION
 To fulfill the increasing energy demand the people and saving of land this project is very
successful one. This can provide electricity without any power cut problem. The extra
energy can be provided to the grid.
 Saving of land, this project is very successful one.
 Increases the efficiency of solar cell using nanowires
 The main aim of this project is uplifting the public opinionon R E S.
 The Strawberry Tree, invented by the Serbian company Strawberry Energy is a variation
of the Solar Tree in that it is specifically designed to recharge mobile devices. The
company won the Sustainable Energy Week 2011” competition for its revolutionary
contribution.
 There is a distinction to be made between organically inspired solar trees and structures
which have been adopted to create energy efficient parking lots. Companies such as
General Electric have installed solar panels in car parking lots to collect solar energy and
protect vehicles from sun damage. These car sheltering solar devices differ from artistic
Solar Trees in that they have no organic aesthetic. In contrast to the field of solar artwork,
they would more appropriately be dubbed elevated solar panels.

23
REFERENCES
1. Agrafiotis, C.; Roeb, M.; Konstandopoulos, A.G.; Nalbandian, L.; Zaspalis, V.T.; Sattler,
C.; Stobbe, P.; Steele, A.M. (2005). “Solar water splitting for hydrogen production
with monolithic reactors” IEEE Proc.,
2. vol. 81, pp. 1202–1213, 1993.
3. Anderson, Lorraine; Palkovic, Rick (1994). Cooking with Sunshine (The Complete Guide
to Solar Cuisine with 150 Easy Sun-Cooked Recipes).
4. Balcomb, J. Douglas (1992). Passive Solar Buildings. Massachusetts Institute of
Technology. ..
5. Bolton, James (1977). Solar Power and Fuels. Academic Press, Inc…
6. Bradford, Travis (2006). Solar Revolution: The Economic Transformation of the Global
Energy Industry..
7. Butti, Ken; Perlin, John (1981). A Golden Thread (2500 Years of Solar Architecture and
Technology).
8. Carr, Donald E. (1976). Energy & the Earth Machine. W. W. Norton & Company..
9. Daniels, Farrington (1964). Direct Use of the Sun’s Energy. Ballantine Books.
10. Projects. Solar Tree Foundation. N.p.Web. 20 Feb 2013. Solar Tree Foundation
Projects.
11. Solar Tree Foundation accessed: Feb 20, 2013 Solar Tree Foundation site
12. Solar Tree. Artemide. N.p. Web. 20 Feb 2013. Artemide Brochure.
13.TR Tooke CC Nicholas AV James et al "Tree structure influences on rooftop-received
solar radiation" Landsc Urban Plann., Vol. 102, no. 2, pp. 73-81, Aug. 2011.
14.J.A. Jakubiec, C. F. Reinhart, "A method for predicting city-wide electricity gains
from photovoltaic panels based on LiDAR and GIS data combined with hourly
Daysim simulations," Sol. Energ., Vol. 93, pp. 127-143, Jul. 2013.
15.R. Berry, S. J Livesley, & L. Aye, "Tree canopy shade impacts on solar irradiance
received by building walls and their surface temperature," Build. Environ, Vol. 69,
pp. 91-100, Nov. 2013.
16. http://en.wikipedia.org/wiki/Solar_tree
17. Solar World Article on the Rams' solar projects
18. http://envisionsolar.com/solar-tree-array/

SOLAR TREE technical seminar report doc

More Related Content

What's hot (20)

Viewers also liked (20)

Similar to SOLAR TREE technical seminar report doc (20)

Recently uploaded (20)

SOLAR TREE technical seminar report doc