Ste db esp65_rgb_en
0 likes161 views
ESP 65 is a steel bar product produced in diameters between 6-80mm. It has a carbon content between 0.14-0.19% and can be processed via drawing, peeling, or grinding with tolerances of h9, h11, or ≥IT6 respectively. Standard bar lengths are 3m but can be between 3-6m with chamfered and tapered ends as the standard finish for diameters ≤65mm. Special tolerances and end finishes are available upon request.
Ste db esp65_rgb_en
- 1. Process Size range mm Tolerance drawn +C 6 – 80 h9 peeled +SH 18 – 80 h11 ground +SL 6 – 80 ≥ IT6 » Colour coding ESP 65: brown end face » Bar lengths: standard 3 m, production lengths: 3 – 6 m » End finish: standard finish Ø ≤ 65 mm is chamfered on one side and tapered on the other side. The ends can be machined to special requirements upon request Product range ESP 65 is produced in the form of bars in a size range of 6 to 80 mm diameter. Steeltec ESP 65 Special tolerances upon request Element C Si Mn P S Cr Pb min. 0,14 0,15 1,00 0,020 0,80 0,15 max. 0,19 0,40 1,30 0,035 0,035 1,10 0,30 Chemical analysis melt analysis % by weight (EN 10277) Piece analysis and melt analysis may vary according to EN 10277-4. Mechanical properties State +C +SH Proof stress Rp0,2 N/mm2 ≥ 300 ≥ 300 Tensile strength Rm N/mm2 500 – 740 500 – 630 Ultimate elongation A5 % ≥ 12 ≥ 13 1