Summer training in NTPC ppt
Download as PPTX, PDF30 likes16,397 views
This document provides a summary of a seminar on summer vocational training at NTPC thermal power plants. It discusses the key components of a thermal power plant including coal handling, pulverizing, boilers, turbines, generators, condensers, and ash handling. It also describes various equipment like ball mills used in pulverizing coal and control and instrumentation labs that monitor critical parameters. Finally, it lists some major thermal power plants in Rajasthan and references used in preparing the seminar.
Summer training in NTPC ppt
- 1. A SEMINAR ON SUMMER VOCATIONAL TRAINING BY: DHEERAJ PATHAK 7 EC-29 1
- 2. List of content : 1. About NTPC 2. Coal to Electricity 3. Layout of Thermal Power Plant 4. Main Equipment of Power Plant 5. C&I Labs 6. Thermal Power Plant in Rajasthan 7. Conclusion 8. References 2
- 3. NTPC-The Power Giant Formally known as National Thermal Power Corporation Ltd. Established in Nov’1975. Arup Roy Choudhury is chairman and MD. Installed Capacity 43,128 MW. Projects 17coal based , 7 gas based & 9 in JVs. Planned capacity 75,000 MW by 2017. With only 19.24 % of the all India installed capacity, it generates about 26.7 % of power. Annual turnover of Rs. 73,904 cr. with profit of Rs. 13,834 Cr. for the year 2013- 14. 3
- 4. Coal to Electricity ….. Basics 4
- 5. 5 Why Coal? Share of Coal in Power Generation Advantages of Coal Fuel •Abundantly available in India •Low cost •Technology for Power Generation well developed. •Easy to handle, transport, store and use •India’s Coal Reserves are estimated to be 206 billion tones. Present consumption is about 450 million tones. •Cost of coal for producing 1 unit of electricity is Rs 0.75. •Cost of Gas for producing 1 unit of electricity is Rs 1.20. Coal 55% Gas 10% Diesel 1% Hydel 26% RES 5% Nuclear 3%
- 6. General Layout of Thermal Power Plant 6
- 7. Main Equipments of Power Plant 1. Coal handling plant 2. Pulverizing plant 4. Boiler 5. Turbine 6. Generator 7. Condenser 8. Ash handling plant 7
- 8. Coal handling plant 8 •The function of coal handling plant is automatic feeding of coal to the boiler • A thermal power plant burns enormous amounts of coal. •A 200MW plant may require around 2000 tons of coal daily.
- 9. Pulverizing plant In modern thermal power plant , coal is pulverized i.e. ground to dust like size and carried to the furnace in a stream of hot air. Pulverizing is done in pulverizing mill. Pulverizing mill is further classified in three parts: Contact mill Ball mill Impact mill 9
- 10. Boiler 10
- 11. Turbine A turbine is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work. It consists one moving part called a rotor assembly. Steam turbines are used for the generation of electricity in thermal power plants. In thermal power plant turbine is sub divided in three parts: HPT IPT LPT 11
- 12. Generator An electric generator is a device that converts mechanical energy to electrical energy. It is based upon the principle of electromagnetic induction. the magnitude of EMF generates by generator is given by: E=4.44φFN volts Generators provide nearly all of the power for electric power grids. 12
- 13. Condenser 13
- 14. Ash handling plant The percentage of ash in coal varies from 5% in good quality coal to about 40% in poor quality coal. Power plants generally use poor quality of coal , thus amount of ash produced by it is pretty large. A modern 2000MW plant produces about 5000 tons of ash daily. 14
- 15. C&I Labs Labs Monitored parameter 1. Manometry Lab 2. Protection and Interlocks Lab 3. Automation Lab 4. Electronics Lab 5. Water Treatment Lab 6. Furnaces Safety Supervisory System Lab 1. Speed 2. Temperature 3. Current 4. Voltage 5. Pressure 6. Flow of Gases 7. Vibration 15
- 16. Conclusion 16
- 17. Thermal power plants in RAJASTHAN Chhabra thermal power plant- 500MW Kota super thermal power plant- 1240MW Giral lignite power plant- 235MW Suratgarh super thermal power plant -1500MW 17
- 19. 19 Thank You!!