TApp Web training material_rev4

Editor's Notes

• #3: Floating SmartArt bullet list (Basic) To reproduce the SmartArt on this slide, do the following: On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Bullet List (second row, first option from the left), and then click OK to insert the graphic into the slide. To create another row, select the bottom first-level (color-filled rectangle), and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click the arrow next to Add Shape, and select Add Shape After. Select the first-level (color-filled rectangle) that you just added, and then under SmartArt Tools, on the Design tab, in the Create Graphic group, click Add Bullet. To enter text, select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each level. (Note: In the example slide, the first-level text are the “Topic One,” “Topic Two,” and “Topic Three.” The second-level text are the “Supporting Text” lines.) Select the border of the SmartArt graphic. Drag the left center sizing handle to the left edge of the slide to resize the width of the SmartArt graphic. To reproduce the rectangle effects on this slide, do the following: Press and hold CTRL, and select the three color-filled rectangles (in the example slide, these are the “Topic One,” “Topic Two,” and “Topic Three”), and do the following: Under SmartArt Tools, on the Format tab, in the Shapes group, click Change Shape, and under Rectangles select Round Diagonal Corner Rectangle (ninth option from the left). Under SmartArt Tools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Presets and select Preset 7 (second row, third option from the left). On the Home tab, in the Font group do the following: In the Font list, select Franklin Gothic Demi Cond. In the Font Size box, enter 32 pt. Click Text Shadow. On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Text Box in the left pane, and in the Text Box pane, under Internal margin, in the Left box enter 3”. Select the first color-filled rectangle from the top (in the example slide, “Topic One”) and do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane do the following: Click Gradient fill. In the Type list, select Linear. Click the button next to Direction, and then click Linear Right (first row, fourth option from the left). Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Then customize the gradient stops that you added as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select Olive Green, Accent 3 (first row, seventh option from the left). In the Transparency box, enter 90% Select the last stop on the list, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select Olive Green, Accent 3 (first row, seventh option from the left). In the Transparency box, enter 0%. Select the second color-filled rectangle from the top (in the example slide, “Topic Two”) and do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane do the following: Click Gradient fill. In the Type list, select Linear. Click the button next to Direction, and then click Linear Right (first row, fourth option from the left). Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Then customize the gradient stops that you added as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select Blue, Accent 1 (first row, the fifth option from the left). In the Transparency box, enter 90% Select the last stop on the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select Blue, Accent 1 (first row, the fifth option from the left). In the Transparency box, enter 0%. Select the third color-filled rectangle from the top (in the example slide, “Topic Three”) and do the following: On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane do the following: Click Gradient fill. In the Type list, select Linear. Click the button next to Direction, and then click Linear Right (first row, fourth option from the left). Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Then customize the gradient stops that you added as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 0%. Click the button next to Color, and then under Theme Colors select Orange, Accent 6 (first row, tenth option from the left). In the Transparency box, enter 90% Select the last stop on the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select Orange, Accent 6 (first row, tenth option from the left). In the Transparency box, enter 0%. To reproduce the bulleted text on this slide, do the following: Press and hold CTRL, and select the three second-level, bulleted text boxes. On the Home tab, in the Font group do the following: In the Font list, select Franklin Gothic Med Cond. In the Font Size box, enter 22 pt. In the Font Color list, select White, Background 1, Darker 25% (fourth row, the first option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box, in the left pane select Text Box, and in the Text Box pane do the following: Under Text layout, in the Vertical alignment list select Middle. Under Internal margin, do the following: In the Left box enter 3.8”. In the Top box enter 0.2”. In the Right box enter 0.17”. In the Bottom box enter 0.2”. Expand the vertical size of the SmartArt graphic as needed, by dragging the top or bottom sizing handle. To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Animations group, click Animation Pane. Select the SmartArt graphic on the slide, and then on the Animations tab, in the Animation group, click the More arrow on the Effects Gallery and click More Entrance Effects. In the Add Entrance Effect dialog box, under Moderate select Float In, and then press OK. In the Animation group, click Effect Options and do the following: Under Direction, click Float Up. Under Sequence, click One by one. In the Timing group, in the Duration list, select 01.00. In the Animation Pane, do the following: Click the double arrow below the effect to show all the effects. Press and hold CTRL, and select all the effects. On the Animations tab, in the Timing group, in the Start list select After Previous. Press and hold CTRL, and select the second, fourth, and sixth effects (bullet float in entrance effects). On the Animations tab, in the Animation group, click the More arrow and click More Entrance Effects. In the Change Entrance Effect dialog box, under Basic select Peek In, and then click OK. On the Animations tab, in the Animation group, click Effect Options and under Direction, click From Left. On the Animations tab, in the Timing group, in the Duration list, select 01.00. To reproduce the background effects on this slide, do the following: Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following: In the Type list, select Linear. Click the button next to Direction, and then click Linear Left (first row, fifth option from the left). Also Under Gradient stops, click Add gradient stop or Remove gradient stop until three stops appear on the slider, then customize the gradient stops as follows: Select the first stop on the slider, and then do the following: In the Position box, enter 60%. Click the button next to Color, and then under Theme Colors select White, Background 1 (first row, first option from the left). Select the next stop on the slider, and then do the following: In the Position box, enter 90%. Click the button next to Color, and then under Theme Colors select White, Background 1, Darker 25% (fourth row, first option from the left). Select the last stop on the slider, and then do the following: In the Position box, enter 100%. Click the button next to Color, and then under Theme Colors select Black, Text 1, Lighter 50% (second row, second option from the left).
• #4: Web and Mobile automated tests using Selenium. Test script creation and management through a Java-based UI; no coding skills necessary. (a) Non-redundant test object and data repositories using a normalized MySQL database; This allows multiple users to work on a single application. (b) User access limited to assigned projects only as a security feature. Can run tests locally or through a remote server for headless execution. Multi-browser support with simultaneous execution. Allows for importing of Gherkin scenarios through JIRA. Simplified command line execution for Bamboo integration. Auto-generates the Test Documentation (with screenshots) as well as summarized reports of Test execution and Performance details.