Teaching Design Strategies in Higher Education

International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 3 Issue 5, August 2019 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
@ IJTSRD | Unique Paper ID – IJTSRD26602 | Volume – 3 | Issue – 5 | July - August 2019 Page 1227
Teaching Design Strategies in Higher Education
Moe Moe Thu1, Reenu1, Su Wityi Aung2
1Faculty of Computer Science, University of Computer Studies, Pathein, Myanmar
2Faculty of Computer Science, University of Computer Studies, Thahton, Myanmar
How to cite this paper: Moe Moe Thu |
Reenu | Su Wityi Aung "Teaching Design
Strategies in Higher Education" Published
in International
Journal of Trend in
Scientific Research
and Development
(ijtsrd), ISSN: 2456-
6470, Volume-3 |
Issue-5, August
2019,pp.1227-1232,
https://doi.org/10.31142/ijtsrd26602
Copyright © 2019 by author(s) and
International Journal ofTrend inScientific
Research and Development Journal. This
is an Open Access article distributed
under the terms of
the Creative
Commons Attribution
License (CC BY 4.0)
(http://creativecommons.org/licenses/by
/4.0)
ABSTRACT
Higher education is one such activity which can convert population into
human resource. Country’s strength in the world today is itsyoungpopulation
and will determine its future progress. Education not only improves the
facilities and skills of people but also dramaticallycontributes totheirphysical
well-being. The new teaching pedagogylays emphasis on applyinghigherlevel
thinking skills through relevant design projects, improving team-working
skills and awareness of issues relating to ethics and professionalism.Outcome
based educational experience to the students at all levels. Teaching design
technology in the classroom can combine a personalized learning experience
for each student, based on each student’s strengths. But active learning
technologies also reduce the teaching workload in higherlevel education.This
paper starts with nature of higher education statement and the motivationfor
this study. Next, teaching design strategies, learning paradigm, theories,
evaluation performance are described. Analysis of teaching techniques and
conclusion are followed in the last section.
KEYWORDS: Education, Learning, Teaching, Assessment, Teaching Techniques
1. INTRODUCTION
We have entered an era where higher education in
engineering may have to undergo fundamental changes, not
only to benefit from pedagogical and technological
innovations, but also to align with the attitudes and
capabilities of today’s students, and better prepare the
graduates for the increasing and different demands of the
new world of work. It is better to envision the changes,
forecast the capabilities needed by tomorrow’s engineers
and make choices about what type of engineer we want to
educate. Education and technology are two basic elements
that play an important role in rendering individual life
effective and efficient. Educational technology is the study
and ethical practice of facilitating learning and improving
performance by creating, using, and managing appropriate
technological processes and resources. Successful
implementation of the national educational technology
strategic plan ultimately depends on the teacher’s ability to
integrate technology into his or her content areas, using
pedagogical analysis that qualitatively improve student
learning [3].
Teachers and instructional designers need to pay closer
attention to the perspective of students’ experiences and
their abilities to be critical thinkers. Teaching design active
learning activities and encouragestudentsto participateand
engage with classmates will enrich theirlearning experience
and make learning more meaningful.Therapiddevelopment
of technologies has made a big impact in personal life of
individuals but also significantly influences the dynamic of
learning. Without doubt, acquiring, sharing, and processing
knowledge are all essential activities of learning. Students
also expect themselves to give and receive feedback to feel
that they are part of learning and by sharing knowledge and
arguing with others can enforce them to think critically.
Based on the study results, instructors focused on more of
content delivery features than collaborative learning
activities in courses and to fulfill the learner’s needs.
The nature of work is becoming more service-oriented as
employees are dealing with a variety of people and needs.
Recent graduates largely learn theory in school and need
more practical application and experience. Employers cite
higher level thinking skills as critical andfindthemlackingin
new employees. A well-managed classroom increases
learning because students spend more time on task. Both
instruction and learning are easier in a well-managed
classroom where students are expected to succeed.
Many of today’s IT engineering tasks and curricula in higher
education in engineering still focus on typical 20th-century
how-to-do-it activities, associated with product and service
design, manufacturing and support. In the coming decennia
leaps in scientific discovery and innovations will be
necessary in social, political, economic and technological
fields. They will result in a transformation of life, business
and global economy as we know it today. Technology, the
domain of IT engineers and engineering scientists,willbean
essential component in making such innovations possible.
2. TEACHING STYLES
Teaching style refers to the manner in which a teacher
manages instruction and the classroom environment. There
IJTSRD26602

International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
are three majorteachingstylespermissive,authoritarian and
democratic. Permissive teachers establish few rules and
tend to be inconsistent in enforcing rules or applying
consequences for misbehavior. Authoritarian teachers
establish the classroom rules, learning is teacher centered,
the student's role is to comply with the rules and complete
all work satisfactorily. Democratic teachers establish a
classroom environment that includes input on nearly all
issues of management, voting privileges for students, and
generally positive reactions to studentdesires and needs [5].
Most of instructors have a teachingstylethatis dominantbut
display characteristics that include some aspects of each of
the other styles. The teaching style that identifies the
personality in the classroom controls most aspects of the
instruction, classroom management strategies and
techniques. The teachingstyledetermines howtoimplement
classroom management tasks.Authoritariananddemocratic
teaching styles tend to be most effective becausedisruptions
in the classroom are kept to a minimum.
3. LEARNING STYLES
Individuals have preferred ways of learning throughout the
different stages of learning.Learningstyles address theways
we perceive and process. Perceiving relates to the way we
notice the world and the way we see reality. Processing
relates to the way we internalize an experience and make it
our own. Some people prefer to perceive the world through
concrete experience. These peopleperceivebysensingand
feeling, and prefer to solve the problems of a given task.
Other people prefer abstract conceptualization. They like
to think things through, analyze and intellectualize [5].
They function well in structured situations. Some people
prefer to process new information by active
experimentation. They look for practical ways of applying
what they learn and are results oriented. Other people
process through reflective observation. They likely see
tasks from several points of view. They value patience and
judgment. These are four general learning styles.
Of course, learning styles are only one characteristic of
students. They have different capabilities, interests,
personalities and racial or gender characteristics. Students
mature at different rates. Students without much discipline
or stability in their home life need discipline and stability in
their school life and teaching methods.
3.1. Online Learning
The use of online learning is becoming more common and
that e-learning gives ample opportunitytoaccommodatethe
different cognitive levels and preferences of learners. If
programs are developing for teaching and learning where e-
learning is incorporated, then knowledge of the learning
paradigms and the application thereof is necessary. When
teaching Computer Science, lecturers are faced with the
difficulties of balancing practice and theory in classes. We
should adapt our teaching methods to possible changes.
Online technologies provide change in the engagement of
higher education institutions in lifelong learning and
continuing professional development. Online discussions
involved students with the topics so that all of the students
who participated in the discussions correctly answered the
questions and share the knowledge.
3.2. Active Learning
Learning makes real and teaching should involve
professionals and connect the real-world outside to the
classroom. Active Learning is a process where in students
are actively engaged in building understanding of facts,
ideas, and skills through the completion of instructor
directed tasks and activities. Essentially, all activities are
student centered and require the learner to be actively
involved in construction of knowledge and understanding.
Active learning not only emphasizes the development of
students’ skills but also their exploration of their own
attitudes and values [2].
Graduate student learning can be benefit from active
learning with its features of positive interdependence and
structured individual and group accountability. The active
learning consists of three factors, which are interrelated.
These are: basic elements; learning strategies; and teaching
resources. The basic elements of active learning are
speaking, listening, reading, writing and reflecting. These
five elements involve cognitive activities that allowstudents
to clarify the question, consolidate and appropriate the new
knowledge. The second factor of active learning is the
learning strategies that incorporate the above fiveelements.
These are small groups, cooperative work, case studies,
simulation, discussion, problem solving and mini thesis
writing. Third factor of active learning is teaching resources
that teacher uses to encourage students to interact and
participate actively in the activities [2].
3.3. Student-centered Learning
This learning is a move from teaching to learning. Education
should be seen as a constructive and collaborative process
between teachers and students as well as between students
themselves. The issue of student-centered learning is often
seen as a competence of faculties or higher education
institutions. The activity was for each student to facilitate
each learning activity and participate in the activities based
on learning objectives. In this learning, teachers (we) center
their planning, teaching and assessment on the needs and
abilities of our students. Teachers should emphasize
students to do meaningful learningactivities andthink about
what they are doing [4].
3.4. Collaborative Learning
The core element of collaborative learning is working in
groups rather than working individually. It can refer to any
instructional method in which students work together in
small groups toward a common goal. Students feel more
connected, particularlywith theirclassmates,and they noted
the positive effects of learning space on their collaborative
projects. Round tables inherently created a collaborative
environment for learning and forced studentstolook ateach
other and thus changing the relationship. Collaboration can
help to ensure that students share responsibilityand seek to
support each other [1].
3.5. Cooperative Learning
Cooperative learning can be defined as a structured form of
group work where students pursue common goals while
being assessed individually. The coreelementofcooperative
learning is cooperation rather than competition and
provides a natural environment to promote interpersonal
skills. It is based on the premise that cooperation is more
effective than competition among students for producing
positive learning outcomes [1].

3.6. Problem-based Learning
This is an instructional method and used to provide the
context and motivation for the learning. It is always active
and usually using collaborative or cooperative. Problem
based learning does provide a more challenging, motivating
and enjoyable approach to education. Universities adopting
Problem based learning are likely to positively influence
student attitudes and study habits. Students will retain
information longer and perhaps develop enhanced critical
thinking, problem-solving skills and life-long learning skills
in a natural environment [5].
3.7. Project Oriented Learning
Project-oriented learning helps learners develop skills to
work in a knowledge-based, highly technological world. By
bringing real-life context and technology to the curriculum
through a project-oriented learning approach, learners are
encouraged to become independent workers, critical
thinkers, and lifelong learners. Project-oriented learning is
like learner-centered instruction, so the focus is on learner
activities. The process of project oriented learning –issue
(prompts action), organizing statement (telllearners how to
address issue) and solution process (find a solution)
Figure1. Process of Project-oriented Learning
The above figure shows the process of project-oriented
learning. It is an instructional method in which learners gain
knowledge and skills by working for an extended period of
time. The project-oriented learning canbedivided intothree
processes. First, thelearners havetoinvestigateandrespond
to an engaging and complex question, problem, orchallenge.
Second, learners have to address the issue for real-life
application of both technical and work readiness skills to
solve a problem by taking part of each assigned topic. In the
final process, learners are solving the workplace problem to
simulate in the classroom setting through an activity that
allows learners to practice their skills and reached to the
solution. This design process of the project-oriented activity
and the way learners work together to address the issue can
deepen content knowledge and develop learners work
readiness skills.
4. CURRICULUM DESIGN
Curriculum design is a planning framework to guide
curriculum, instruction, and assessment. It is the systematic
development of instructional specifications that follow
learning and instructional theory to ensure the quality of
instruction in higher education.
The curriculum design strategies practiced in the courses,
such as content analysis, chunking, realistic objectives,
learning engagement, feedback for students and evaluation
throughout the process are important factors for learningto
take place. There are numerous types of instructionaldesign
methods. It is the process of analysis of learner’s needs and
learning goals and the development of a delivery system to
meet those needs. In this module, we use a specific
instructional design method calledUnderstanding by Design
or Backward Design [1].
4.1. Backward Curriculum Design
Backward Design is an instructional design method that
begins with the end in mind and works backward to design
assessment and instruction based on these learning
outcomes.
Figure2. Backward Curriculum Design
Backward curriculum Design has three steps:
 The instructor identifies the desired results or goals
 The instructor determines the acceptable evidence
 The instructor plans the learning experiences and
instruction
Backward Design is goal oriented. In designing a lesson or
curriculum unit, the instructor focuses on teaching and
assessing for learner understanding and transfer of
knowledge. The instructor also focuses on designing the
curriculum—backward from those ends [1].
5. TEACHING ENVIRONMENT
New teaching environments create different ways of using
learning theories in order to achieve maximum learning
ability. New generations and new learning theories add to
the problem. Understanding the way learning takes place is
difficult, and this is complicated by changes in the students’
environment as well as changing learning styles.
Instructors usually have big classes and each student has
their own psychological profile. The norm in higher level
educational institutes is an hour-long lecture, but studies
have found that the attention span and learning ability of
students decline after 20 minutes. This results in students
only recording about 500 words out ofa lectureconsistingof
5000. New environments create different ways of using
learning theories in order to achieve maximum learning
ability. Engineering students areevenmoreenrapturedwith
the latest technological tools availableduetotheirinterestin
the field. Using technology to construct a visually attractive
lecture, the educator has ample opportunity to demonstrate
behavior that will be effective in the field of Engineering,
both in the practical and theoretical arena.
6. EVALUATION PERFORMANCE
Evaluation performance is any activity that measures what
learners know and provides this informationtoaninstructor
so he/she can change instruction, reteach a lesson, provide
support to a learner, or evaluate the learner’s level of
learning. The teachers uses to obtain, quantify, and describe
information about learner knowledge or performance as an
assessment. There are many different types of assessment.
Exams, projects, essays, observation of learners, and
questioning learners are a few examples. Eachassessment is
like a tool—it serves a different purpose [1].

Diagnostic assessment (before instruction): Instructor
assesses learners have the pre-requisite knowledge and
skills to successfully complete the unit of study. In terms of
pre-requisite knowledge, in what areas do students appear
to have some weaknesses and how students address thesein
the unit of study.
Formative assessment (during instruction): Instructors
check learners seem to understand the material and having
difficulties. Which learners really understand and how can
instructor get to help the learners who are struggling? What
strategies or examples should instructor use to help
struggling learners?
Summative assessment (after instruction): In this
assessment, how much have my learners learned? What
should I do next? Should I go back and review and reteach
material or move on? How can I improve how I instruct so
more learners will do better in the next unit of study?
7. ANALYSIS OF TEACHING TECHNIQUES
Active learning is playing an increasing role in higher
educational teaching to achieve the desired effect on the
students’ learning outcomes. Teachers need to explore and
determine the most effective classroom techniques and
practices. The goal is thattherecommendationsmayserveto
improve classroom management skills forbeginning,as well
as for veteran teachers in order to promoteongoinglearning
for all students. With the diverse population of students,
changes in cultural behaviors and social and emotional
pressure students had in their lives. As teachers learned
more about a variety of instructional design approaches,
they would be able to sample techniques that would fit their
needs, will have more success in maintaining positive
student behavior, to guide students toward successful rule
compliance in the classroom, on the job, and in the
community. Table 1 shows the mapping of the teaching
techniques.
Table1. Mapping of Teaching Techniques
Techniques
Learner-Centered
Instruction
Higher-Level
Thinking
Facilitation Employability
Work Readiness Skills √ √ √
Linking Curriculum to Industry Needs √ √ √
Facilitation Skills √ √ √
Participatory Learning √ √ √
Instructional Design √ √ √ √
Project-Oriented Learning √ √ √ √
Learner-Centered Assessment √ √
Blended Learning √ √ √ √
Finding and using Online Resources √ √ √
Teachers should have need to get the experiences of
instructional teaching design strategies and learning in
higher education and share these practices to other
instructors. In mapping of techniques and learners’ skills in
transforming to learner-centered approach, the following
facts are analyzed.
Higher Level Thinking Skills
Higher Level Thinking skills are developed when the
instructor through leads activities that are rigorous and
challenging and that focus on developing higher-level
thinking. If leadership positions are promoted then
employees need strong work readiness skills. Adaptability,
collaboration, diligence, problem solving, time management
and communication skills can beaddressed throughlearner-
centered instructional approaches.
As teachers design activities, teachers have to consider the
activity encourages learners to be adaptable and the
activity requires flexible thinking and need to balance
diverse viewpoints to come to a workable solution.
Collaboration is fostered and learners need each other to
complete the task. The activity challengingis enoughthatthe
solution doesn’t come quickly and requires diligence.
Facilitators
Many faculty members (teachers)assumethattheirroleis to
teach. Instead, think: Teacher role is to help students learn.
Facilitators, collaborators,leaders,and organizersarehaving
great success in helping students prepare for lifelong
learning and making them more capable to work in fields
where they must acquire new skills and knowledge
regularly.
Participatory Learning
Several newer teaching models stress active student
participation, in which students process material presented
in class via discussionwiththeinstructorand peers,problem
solving, and group activities interspersed with periods of
listening and note-taking. In our approach, teachers present
knowledge in a lecture format and the students passively
gather that information by listening and taking notes. When
an instructor can query and collect responses from every
individual in the classroom, the instructor can gauge
instantaneously what students understand, and which
concepts they are failing to grasp.
Peer-teaching Technique
When peer-instruction techniques are used, students
became involved in the teaching process.Theywereeager to
argue over possible answers with each other as well as with
the instructor. The approach used in the classroom is often
helps students is to teach them to quickly sketch out a
response to a question in their notes. Another method is to
give some thinking questions or calculations at the end of
class and tell students the next class will beginwithstudents
being called on to respond to those items. Writing also helps
students learn to express their thoughts more clearly and
focuses their attention on important elements of the course.
It also provides valuable feedback to us as a collection of
possible test questions.
Project-Oriented Learning
In current state, our class size is a little big, over 50.
Instructor creates small groups with 4 or5people;there will
be at least 10 groups. So there will be free rider although we

collect feedback at the end of the class and instructors
observed every group activities.Instructors havetofacilitate
by ourselves, and don’t have any other assistance in our
class. So, teachers overcome to the occurring of free rider in
our teaching higher education environment.
The size of groups are made into small. Teachers have to
take time to explain to class that students’ role is a “job” and
like a real job they have to perform in thatrole.Students owe
it to their team and themselves. Teachers make roles
meaningful—they have to do andproducesomethingunique
to that role.
Teachers monitor students to keep an eye on them, walk
around, and make sure everyone is working. If we see or
hear that someone is not working, take them outside and
talk with them. We ask students that what the problem is
and figure out a way together to resolve it so they do their
work. At the end of the day we must do an exit ticket where
we ask specifically about student’steamfunctioning,is going
well and having problem. Look through exit slips and
identify problems and teams who are having problems and
talk with the team.
Student-centered Assessment
Students can assess themselves and each other. As their
instructor, we can assess learners through actual
performance-based tasks and rubrics. When assigning a
team project, how well did the team members collaborate
and contribute their individual pieces to the greateractivity.
The assessments match with the learning task to be
measured by using an essay to assess a student’s thinking
and using a multiple-choice or short answer test to assess
student’s ability to identify or recall information [6].
Using student-centered assessment, teachers can assess
different levels of learner knowledge: Levels range from
basic knowledge to more high-level learning (the ability to
apply, analyze, synthesize, and evaluate information).
Assessments measure not just students learn,butwhat, how,
why, and under what conditions they learn best. It also
measures their progress as students. In my class, I used
checklists to assess the student performance. After I had
learned the rubric from training and started to use rubric,
found that standardized and faired. I used rubric for group
assignment and POL activity in the class room. Rubrics have
benefited the students toincrease responsibility oftheir own
work, was a tool for assessment measure and student-
centered assessment.
Blended Learning
Blended learning is about finding better ways to support
learners in achieving the learning objectives and providing
them with the best possible learning and teaching
experiences. Blended learning is any instruction that blends
some digital content or instruction and some face-to-face
content or instruction.
Learning objects such as audio, multimedia, and video can
supplement textbooks and lectures. In the case of flipped
learning, they can replace textbooks and lectures. Blended
learning can be used to facilitate discussion and
participation. Some learners are more comfortable
participating in online discussions than in classroom
discussions. Writing, versus speaking, gives learners time to
formulate and organize their thoughts [6].
As teachers plan lessons thatincorporateInternet resources,
teachers keep in our mind that the reliability and strength of
Internet access in the classroom and in computer labs.
Applying Online Resources in Classrooms
The author used a learning-management system (LMS) to
embed videos and set up online quizzes and student forums.
The aim was to engage students with the subject, and draw
their attention to the content through innovative learning
strategies such as interaction in the forums. By using the
LMS, the author managed to significantly reduce student-
accessibility problems, as now students could access the
notes and assessments and participate from anywhere and
at any time. In doing so, instructors could teach online
course in offline in parallel and learners can learn more
detail and understand.
At the heart of the ICT engineer in higher education lie
defining and enabling capabilities. ICT Engineeringstudents
are not only students of the subject matter of engineering,
but also of problems and solutions that may very well go
beyond their own expert domain.Intheir educationteachers
have to prepare them for basically three different roles that
they may play in their future careers [3]. Firstly, teachers
have to enable our graduate students to develop into a
technical expert of world-class standing. Secondly, graduate
students should be able to develop as an integrator who can
synthesize, operate and manage across boundaries, be they
technical or organizational, in a complex environment.
Thirdly, the graduate students should be able to take on the
role of the creativity, innovation, and leadership that is
needed to guide research and industry toa successful future.
During their study they must learn how to link science and
engineering to the needs of society, and communicatethatto
the public.
8. CONCLUSION
Teaching design strategies in higher education have been
recommended to help teachers meet the needs of the full
spectrum of learning styles. It induces students to adopt a
deep approach to learning, and promote students’
intellectual development. The better students understand
the strengths and weaknesses associatedwith theirattitudes
and preferences based on their education level, the more
likely they will be to learn effectively while they are in
university and throughout their careers. So, teachers should
apply the instructional toolkits in their class room coming
academic semester and ready to transform from traditional
learning to student-centered learning.
Students become active participants in the learningprocess,
is an important means for development of student skills. In
the process of active learning, students move from being
passive recipients of knowledge to being participants in
activities that encompass analysis, synthesis.Activelearning
can allow for greater communication betweenstudents to do
meaningful learning activities and think aboutwhattheyare
doing. Adoption ofstudents-centered approaches is essential
to improving learning outcomes, better recruitment and
retention in engineering. It also helps meet accreditation
requirements. The best practice on teaching design
strategies and learning in higher education such as project-
oriented learning, learner-centered instruction and blended
learning for not only the instructors but also for their
students thinking in order to practice higher-level thinking

skills. Higher education has no alternative but to follow and
take advantage of these teaching strategies to benefit the
quality of students to offer. This is a major shift infocus from
the current teacher-oriented imparting of engineering
education to a project-based and student-oriented
educational experience.
References:
[1] “Instructional Design and Learner centered
Assessment”, MekongSkills2Work Sourcebook: A
Guide for Administrators and Instructors.
[2] Aimee Whiteside, Ph.D. and Steve Fitzgerald,
“DesigningSpacesforActiveLearning”,A Newsletter
by Informed Design, vol 7, issue 01.
[3] Ann Kovalchick and Kara Dawson, “Education and
Technology”, an Encyclopedia, Oxford, England.
[4] Michael Prince, “Does Active Learning Works?”, A
Review of the Research, Journal of Engineering
Education, July 2004.
[5] Orhan Karamustafaoglu, “Active learning strategies
in physics teaching”, Energy Education Science and
Technology Part B: Social and Educational Studies,
2009 Volume (issue) 1(1): 27-50.
[6] Reenu, “ED 102 EducationTechnologies”,Diploma in
Vocational Education and Training, April, 2016.

Teaching Design Strategies in Higher Education

More Related Content

What's hot (19)

Similar to Teaching Design Strategies in Higher Education (20)

More from ijtsrd (20)

Recently uploaded (20)

Teaching Design Strategies in Higher Education