Technical data sheet rbt 2000 d-50hz 1.0
0 likes110 views
This document provides technical specifications for a 2000 kVA / 1600 kW uninterruptible power supply (UPS) system, including: 1) Electrical characteristics for both the mains input side and UPS output side, such as voltage, frequency, current, and tolerance levels. 2) General UPS characteristics such as efficiency, ventilation requirements, insulation class, operating temperature, noise level, and climatic conditions. 3) Physical dimensions, weights, and protection levels for the main power cabinet, control cabinet, and variable frequency drive cabinet.
Technical data sheet rbt 2000 d-50hz 1.0
- 1. REFERENCE : Standard RBT-2000D RBT 2000-50 ( For reference only ) 2000 kVA / 1600 kW Electrical characteristics - 'Mains' side Electrical characteristics - Critical Load (UPS) Voltage between phases (other upon request) 3 x 400 V + N Nominal apparent power 2000 kVA Neutral connection (other upon request) TNC Nominal active power 1600 kW Short-circuit capacity ≤ 65 kA Nominal cos ϕ 0.9 leading to 0.8 lagging Frequency 50 Hz Maximum capacitive load 640 kVAr Protection by upstream breaker ('DA' not included) 3200 A Nominal phase current 2887 A Cos ϕ in nominal conditions ~ 0.98 Maximum neutral current = 1 x phase current Steady state tolerance on mains voltage -12.5% … +12.5% Overload capacity +10 % : 1 hour Genset start delay time 1s (adjustable) +25% : 5 minutes Nominal autonomy ( Efficiency mode ) 10s (ajustable) +50% : 2 minutes Maximum autonomy at increased speed 10s Tolerance on output voltage Synchronisation time ≤ 2s Steady state ± 1% Full energy storage restoration time ~ 10 minutes Droop Adjustable 0 … 5% Tolerance on upstream frequency Dynamic ± 8% during max. 200ms On mains ± 1% < CBEMA curve On genset ± 5% Frequency tolerance during energy transfer ± 1% Upstream current distortion (THDI) ≤ 2% Downstream voltage distortion (THDU) ≤ 2% Filtration of harmonic currents (mains/load) ~ 10 Short-circuit current (substransient) 41,2 kA UPS General characteristics Dimensions, mass & protection Efficiency at nominal load Rotabloc Max power dissipation for ventilation design 100 kW W x D x H 3225 x 1200 x 1570 mm Rotabloc ventilation Net weight 9285 kg Accumulator intake 2 x 4000 m³/h Protection IP 23 Alternator intake 2 x 4700 m³/h Total outlet 2 x 8700 m³/h Power Cabinet Insulation class H W x D x H 4450 x 1050 x 2125 mm Operating temperature class F Net weight 4200 kg Noise level ≤ 95 dBA at 1 m Protection IP 43 Ambient temperature ≥ 0° C ≤ 45° C (higher Control Cabinet upon request) W x D x H 1250 x 650 x 2125 mm Climatic conditions Normal Net weight 325 kg Altitude ≤ 1000 m Protection IP 43 Humidity ≤ 90% without condensation VFD Cabinet Floor characteristics W x D x H 2 x (650 x 650 x 2125 mm) Flatness ≤ 2 mm Net weight 2 x (185 kg) Horizontality ≤ 3 mm/m Protection IP 43 MTBF ≥ 150 000 hours MTTR ≤ 8 hours Connections Cable entry in electrical cabinets from top (other upon request) 4651 BATTICE (BELGIUM) Email: info@iemps.eu TECHNICAL DATA SHEET 96,8% IEM POWER SYSTEMS SA Tel: +32 87 32 40 50 Cour Lemaire 16 www.iemps.eu All data in this document is for information only and is subjet to change.