The Origin And History Of Pi By Nikitha Reddy

The Origin and History of Pi

By Navya

Objectives

 Study the history of pi.
 Learn the meaning of pi.
 Examine the development of pi along with
the development of mathematics.
 Evaluate some of the different formulas
that pi is used in.
 Explore professions that use pi.

Intro to pi
 Ever wondered what that symbol means on your calculator. It
is the first Greek letter of the Greek work meaning “perimeter”. It turns
out that it is a very important symbol.

 Pi = 3.1459.

 Some of you may already know that pi is used in a lot of different
mathematical formulas.

 As you study pi keep in mind that for thousands of years people had
to calculate pi by hand. This took an incrediably long time.

What is pi? Pi=3.14159
Pi is the mathematical constant whose value is the ratio of a circle’s
circumference to its diameter.

Circumference = The distance around a circle

Diameter = The width of a circle.

How Pi was developed.

 The history of pi is complicated. No one “invented” pi. It was discovered rather than
made. The use of pi developed as the use of mathematics developed.

 Ancient Egyptians and Greeks knew the ratio of the circumference to the diameter of a
circle is the same for all circles and is slightly higher than 3.

 Though the estimate of ancient civilizations was close to pi it was not until Archimedes,
a Greek mathematician and physicist, who more accurately calculated pi.

How Pi was developed. (con’t)
 Archimedes found that if he drew circles in polygons and calculated the
inner and outer polygon’s perimeters and calculated the values that the
estimate of pi was 3.1419.

Polygon=geometric figure with
three or more sides or angles.

The second major advancement in understanding pi came with the
development of calculus.

How Pi was made. (con’t)
Isaac Newton was able to calculate 15 decimals in the pi series, it is said that
Newton spoke about his work with pi saying he was ashamed how long it took
him just to calculate the 15 digits without working on anything else.

 In 1706 John Machin developed a converging series for pi
that calculated up to 100 decimal places.

 By the year 1949 digital computers were invented and
could calculate 100’s of decimal places of pi in hours. In
1949 John von Nuemann calculated 2037 digits of pi in 70
hours.

 As you can tell, pi has been very difficult to calculate.

 It has taken 1000’s of years to estimate with 100’s of different algorithms (a set of
rules for solving problems in a finite number of steps) that made it possible for
mathematicians to more accurately define pi.

Using Pi

Pi has mathematical applications in most professions.

Can you think of situations where using pi might be important to
you?

As you probably already know you use pi for finding the
Area and Circumference of a circle.

Using Pi (con’t)
 Other applications of pi are finding the volume of something.

Volume = The amount of 3-D space an object takes up.

Everyone in the world at some time has used pi.

Agriculturalist, engineers, architects, and construction workers are just a few of the
professions that use pi extensively.

Area
 Area=pi x the radius squared.

 The radius of a circles is the distance from the
center most point to the edge of that circle.
<= radius

 For example. Tim the architect has to build a
circular column that has a radius of 5 feet. What
would be the area of the entire column?

 To calculate this Tim would take pi x 5 squared

 3.14 x 5 squared = 78.5

 Therefore the area of the circular column is 78.5
feet.

Circumference
 Circumference is the distance around the outside of the circle.

 To find distance we would use the formula circumference= pi x
diameter

 As you know diameter is the width of a circle.

 For example Jim the engineer needs to design a metal tube that has
a diameter of 15 feet.

 Jim needs to find the circumference of the circle in order to make a
metal tube to fit around it. Jim would use the formula c=pi x d

 Circumference = 3.14 x 8 = 25.12

 The circumference Jim is looking for is 25.12 feet.

Volume
 To find volume we would use the formula volume = pi x radius squared x height.

 Tom the agriculturist needs to know the volume of a dipping vat for his cows to safely
and comfortably fit in.

 Before he can calculate he needs to know the radius and the height of the structure
before he can begin building.

 Tom measures the radius at 5 feet and the height at 9 feet.

 Therefore Tom’s formula would look like Volume=3.14 x 5 squared x 9
 3.14 x 5 squared x 9 = 706.5 feet cubed

Pi in the Professions.

 Agricultural professionals may use pi to determine the area
covered by a pivot irrigation system or storage facility. The would
use the formula

Architects and construction works would both use the formula
for Area extensively. They also use the formula for volume
extensively to fill columns of concrete and to know the space
a building would take up.

Pi in the Professions. (con’t)
 Engineers use advance formulas that include pi.

These are just some of the
formulas an engineer would use.
Moving around structures such as
landmasses and buildings would
require the use of some of these
formulas.

Engineers would probably use pi more than other professions.

Summary

 Pi is the mathematical constant whose value is the ratio of a circle’s circumference to
its diameter.

 The use of pi dates back to 1900 BC with ancient Egypt and Greece.

 It has taken 100’s of different algorithms to help estimate pi’s number because it is a
repeating decimal.

 Pi has been developed along with the development of mathematics.

 There are many different applications for pi.

 Many different professionals such as engineers, agriculturalist, and construction
workers use pi.

 Pi day is celebrated on 3/14 of every year because pi = 3.14 

The Origin And History Of Pi By Nikitha Reddy

More Related Content

What's hot (20)

Viewers also liked (11)

Similar to The Origin And History Of Pi By Nikitha Reddy (20)

More from John Williams (20)

The Origin And History Of Pi By Nikitha Reddy