Thomson Linear RoundRail 1CA Specs
1 like98 views
The document provides specifications for Thomson RoundRail linear guides and components, including dimensions, load ratings, and part numbers for single continuously supported linear guides with pillow blocks or twin pillow blocks. It also provides specifications for replacement component dimensions and load capacity matrices for different linear guide assemblies.
Thomson Linear RoundRail 1CA Specs
- 1. www.danahermotion.com 225 Thomson RoundRail Linear Guides and Components RoundRailLinearGuides Dimensions (Inch) Single Continuously Supported Linear Guide with 2 Pillow Blocks Single Continuously Supported Linear Guide with 1 Twin Pillow Block Type SSUPBO Open Type Super Smart and SPB-OPN Open Type Ball Bushing Pillow Blocks Type SSUTWN Open Type Super Smart and TWN-OPN Open Type Ball Bushing Twin Pillow Blocks Load Rating and Limit by Direction Fc Ft Fs Dynamic Load Rating Load Limit Fc C C Ft 0.5C 0.5C Fs C 0.5C Dynamic Load Rating: Load value used in life calculation. Load Limit: Maximum allowable load applied to bearing. Type SRA LinearRace Shaft Support Rail Assembly ‡ Size .500 inch has oil lubricant fitting. Sizes .625 and above have 1⁄4-28 access for lubrication. Continuous Support 1CA Fully Supported, Highest Performance, Industry Standard Dimension Inch Features • Requires only one part number to specify the entire linear guide • Used as a load support, transport, and guidance solution • Used in continuously supported applications when rigidity is required Components • 2 Super Smart Ball Bushing opentype pillow blocks or 1 Super Smart Ball Bushing open twin pillow blocks • 1 60 Case LinearRace shaft support rail assembly Specifying this Thomson Linear Guide 1. Determine the proper Linear Guide for your load and life requirements. 2. Select the part number. 3. Add the letter “L” followed by the overall length in inches, as a suffix to the part number. Part Numbering System Linear Guide Designation Nominal Diameter 1CA-12-FAO L24 Linear Guide Length Type of Bearing Block B9 3 H8 H5 H9 L1 2 J1 J F B9 B8 B6Access for Lubrication † X L1 B9 Br H L L2 r L J3 H5 L2 H5 Br H1 B9 H8 H7 H9 J F G B8 B6Access for Lubrication ‡ RoundRail Linear Guides ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold Serviced By:
- 2. www.danahermotion.com226 Continuously Supported Linear Guide 1CA Single with 2 Pillow Blocks (Dimensions in inches) Part Number Nominal Diameter L1 H Br B9 Pillow Block Shaft Support Rail Assembly 1CA-08-FHO .500 1.50 1.812 1.50 2.00 SPB-8-OPN-XS SRA-8-XS 1CA-12-FHO .750 1.88 2.437 1.75 2.75 SSUPBO-12-XS SRA-12-XS 1CA-16-FHO 1.000 2.63 2.937 2.13 3.25 SSUPBO-16-XS SRA-16-XS 1CA-20-FHO 1.250 3.38 3.625 2.50 4.00 SSUPBO-20-XS SRA-20-XS 1CA-24-FHO 1.500 3.75 4.250 3.00 4.75 SSUPBO-24-XS SRA-24-XS Continuously Supported Linear Guide 1CA Single with 1 Twin Pillow Block (Dimensions in inches) Part Number Nominal Diameter L2 H Br B9 Maximum Stroke Length Pillow Block Shaft Support Rail Assembly 1CA-08-HAO .50 3.5 1.812 1.50 2.00 L-(3.5) TWN-8-OPN-XS SRA-8-XS 1CA-12-HAO .75 4.5 2.437 1.75 2.75 L-(4.5) SSUTWNO-12-XS SRA-12-XS 1CA-16-HAO 1.00 6.0 2.937 2.13 3.25 L-(6.0) SSUTWNO-16-XS SRA-16-XS 1CA-20-HAO 1.25 7.5 3.625 2.50 4.00 L-(7.5) SSUTWNO-20-XS SRA-20-XS 1CA-24-HAO 1.50 9.0 4.250 3.00 4.75 L-(9.0) SSUTWNO-24-XS SRA-24-XS Dynamic Load Capacity Matrix (4 million inches travel) Dynamic Load Capacity Matrix (4 million inches travel) Linear Guide Assembly Part Number Dynamic Load Capacity (lbf ) (Even Distribution) Pillow Block Part Number Pillow Block Dynamic Load Capacity (lbf ) Linear Guide Assembly Part Number Dynamic Load Capacity (lbf ) (Even Distribution) Pillow Block Part Number Pillow Block Dynamic Load Capacity (lbf ) 1CA-08-FHO 290 SPB-8-OPN-XS 400 1CA-08-HAO 290 TWN-8-OPN-XS 800 1CA-12-FHO 1800 SSUPBO-12-XS 900 1CA-12-HAO 1800 SSUTWNO-12-XS 1800 1CA-16-FHO 3000 SSUPBO-16-XS 1500 1CA-16-HAO 3000 SSUTWNO-16-XS 3000 1CA-20-FHO 3730 SSUPBO-20-XS 1865 1CA-20-HAO 3730 SSUTWNO-20-XS 3730 1CA-24-FHO 6160 SSUPBO-24-XS 3080 1CA-24-HAO 6160 SSUTWNO-24-XS 6160 † Super Ball Bushing Bearings are used in .500 inch size pillow blocks. Replacement Component Dimensions Type TWN-OPN and SSUTWNO Type SPB-OPN and SSUPBO Pillow Blocks (Dimensions in inches) Pillow Blocks (Dimensions in inches) Part Number Nom. Dia. L1 H9 H8 H5 B9 B8 B6 J J1 F Wt. (lb) Part Number Nom. Dia. L2 J3 Wt. (lb)Bolt Hole SPB-8-OPN-XS .500 1.69 1.25 .687 .25 2.00 .75 .69 1.69 1.00 #6 .16 .20 TWN-8-OPN-XS .500 3.50 2.50 .40 SSUPBO-12-XS .750 2.06 1.75 .937 .31 2.75 1.00 .94 2.38 1.25 #8 .19 .62 SSUTWNO-12-XS .750 4.50 3.50 1.24 SSUPBO-16-XS 1.000 2.81 2.19 1.187 .38 3.25 1.25 1.19 2.88 1.75 #10 .22 1.24 SSUTWNO-16-XS 1.000 6.00 4.50 2.48 SSUPBO-20-XS 1.250 3.63 2.81 1.500 .43 4.00 1.63 1.50 3.50 2.00 #10 .22 2.57 SSUTWNO-20-XS 1.250 7.50 5.50 5.14 SSUPBO-24-XS 1.500 4.00 3.25 1.750 .50 4.75 1.88 1.75 4.12 2.50 1/4 .28 3.94 SSUTWNO-24-XS 1.500 9.00 6.50 8.08 Top plates are sold separately. Please refer to page 243 under Accessories for P/N and dimensions. Housing Material: Aluminum Alloy Black Anodized Type SRA LinearRace Shaft Support Rail Assembly (Dimensions in inches) Part Number Nom. Dia. H1 H7 Br K X Y G Wt. (lb/ft)Bolt Hole SRA-8-XS .500 1.125 .19 1.50 1.00 4 2 #8 .17 1.26 SRA-12-XS .750 1.500 .25 1.75 1.25 6 3 #10 .22 2.50 SRA-16-XS 1.000 1.750 .25 2.13 1.50 6 3 1/4 .28 4.06 SRA-20-XS 1.250 2.125 .31 2.50 1.88 6 3 5/16 .34 6.30 SRA-24-XS 1.500 2.500 .38 3.00 2.25 8 4 5/16 .34 8.60 LinearRace Shaft Support Rail Material: Aluminum Alloy Black Anodized Support rails are supplied in 24 inch lengths unless quoted otherwise. Maximum length of LinearRace Shaft Support Rail is 72 inches. If longer continuous one-piece LinearRace Shaft Support Rails are required, contact the Thomson Linear Guides Application Engineering department. RoundRail Linear Guides ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold Serviced By: