Tk116 user mannual min gsp vehicle tracker

Shenzhen Diwei Machinery Co., Ltd. ——http://www.diweitrack.com
Shenzhen Diwei Machinery Co., Ltd. Diwei Machinery Co., Ltd.
——— http://www.diweitrack.com
Shenzhen
TK116 Min GPSTK116 Min GPS Vehicle Tracking Devices
For Vehicle Tracking Devices
Vehicle
<GPS+GSM+SMS/GPRS>S

User Manual
V1.0

Model：TK116

---------Appearance---------
- 1 -

Shenzhen Diwei Machinery Co., Ltd. http://www.diweitrack.com

Welcome to use our terminal ，
please read this manual carefully to
install and operate the terminal exactly.
This user manual is for reference only. If
some contents and operation steps
are inconsistent with those for the
actual product, the latter will prevail.

Using TK116 GPS tracker, we can
position 、 monitor and control the
vehicle on the position server via
GPRS、GPS and Internet. It can help
customers to manage
transparently、reduce cost、maintain
security and raise efficiency. Now it is
widely used in business traffic、logistics
distribution 、 automobile lease 、
intelligent transportation 、 shipping
market、army and police、rescuing、
Safety Supervision 、Intelligent city…

- 2 -

Catalog
一、Product Features ..................... 1
二、Components and Accessories . 2
三、Environment for use ............... 3
四、Technical Specifications ..... 4
五、Installation ............................. 5
5.1Before Installation.............. 5
5.2 Install the terminal ............ 9
5.3 Terminal wiring definition
................................................... 11
5.4 Terminal wiring diagram...... 13
六、Attentions for wiring ......... 16
6.1 Power cables................... 16
6.2 External MIC..................... 16
6.3 SOS cables ....................... 16
七、Set up the terminal ............. 17
八、Use the terminal ................... 17
8.1 Power on........................... 17
8.2 Inquiry position ................ 17
8.3 SOS alarm ......................... 18
- 3 -

8.4 Monitor .............................. 18
8.5 Cut off the fuel pump
connection............................. 18
8.6 Recover the fuel circuits19
九、Login the position server . 19
十、Trouble shooting ................... 19
10.1 Cannot connect to the
position server ........................ 19
10.2 Show offline status on
the position server................. 20
10.3 Cannot position for a
long time ................................. 21
10.4 Position drift is serious... 21
10.5 Instructions receiving
abnormally ............................. 22
十一、Warranty rules ................... 22
11.1 Special statement........ 22
11.2 Warranty period ........... 22
Customer’s Information ................ 24

- 4 -

一、Product Features
■ Supports quad bands, i.e.
850/900/1800/1900MHz, universal in
the world.
■Wide Input Voltage：6-36V DC.
■ Supports single positioning and feedbacks
position via GPRS at setting times.
■Supports vehicle positioning and tracking.
■Supports ACC status checking and vehicle status
notifying.
■Use relay to remote control the vehicle..
■Use SOS button for SOS call.
■Use external MIC to monitor remotely.

- 1 -

二、Components and Accessories
■ Components

-Top Front-

-Top Back-

- 2 -

■ Accessories（reference pictures）

Power Cables（Fault） MIC（Optional）

（（
Relay Optional） SOS Cables Optional）
三、Environment for use
1、 Limited working temperature：-20℃~80℃
2、 Storage temperature：-45℃~90℃
3、 Humidity：<95%
4、 Atmospheric pressure：86kPa~106kPa
5、 Make sure the terminal is installed in rainproof
and snow-proof places.

- 3 -

四、Technical Specifications
■Basic Specifications：
Voltage 12VDC/24VDC
Standby Current <3mA
Work current <30mA
GPS positioning
15m
accuracy
GSM positioning
100m
accuracy
GPS Frequency 1575MHz
GSM Frequency 850/900/1800/1900MHz
Hot/warm/cold start time <3s，<15s，<60s
L*W*H ：
Dimensions (mm)
79.5X38.5X10.5
Weight 45 g
■ LED Indicators

Blue LED/GPS

Red LED/GSM

- 4 -

1、Red LED(indicates GSM working state)
0.2s on and o.2s off Searching for GSM
(fast flicker) network
0.2s on, 3s off GSM/GPRS works
(intermittently flicker) normally
2、Blue LED(indicates GPS signal state)
0.2s on and o.2s off Searching GPS
(fast flicker) Satellites
0.2s on, 3s off
GPS works normally
(intermittently flicker)

五、Installation
5.1Before Installation
5.1.1 Open the packing case, then check if the
terminal is Ok and the accessories are intact, or
please contact your dealer;
5.1.2 Choosing a SIM card: You need a
suitable SIM card for using the terminal, please
contact your dealer if you have any question;
5.1.3 Install the SIM card: First use your
thumb to press the SIM card cover, then push it
outside to pull down the SIM card cover. Now you
can insert your SIM card to the SIM card connector
until you cannot move the card inside anymore.
5.1.4 Uninstall the SIM card：Lift up the edge
of the SIM card, next pull it out.

- 5 -

●Pull down the SIM cover(three steps)

- 6 -

●Install SIM Card（two steps）
First、Insert the SIM card until cannot move it inside
anymore;
Second、Pull the SIM card back a bit;

- 7 -

●Uninstall the SIM card
First、Lift up the edge of the SIM card;
Second、Pull out the SIM card.
5.1.4 Notice
●Please cut off the power before installing or
uninstalling the SIM card.
●The SIM card should support GPRS and the
GPRS should be opening.
●Inquiry by call needs the SIM card supporting the
calling line identification presentation.
●If you enable the PIN code of the SIM card,
please use your mobile phone to disable the PIN
code.

- 8 -

● Please make sure that the SIM card has
sufficient balance.
5.2 Install the terminal
5.2.1 Suggest to install the terminal concealed by
the dealer designated professional body.

Please make sure to install the terminal with this
side upward, and use wide strong double-sided
adhesive sponge to fix it.

Please make sure to install the terminal with this
side towards the ground, and use wide strong
double-sided adhesive sponge to fix it.
5.2.2 Notice
●Hide the terminal properly inside the car body in
- 9 -

order to avoid damages.
● Keep the terminal away from RF emission
sources such as backing radar、car burglar alarm
and other vehicle mounted communication devices.
● Suggest to use wide strong double-sided
adhesive sponge to fix it, or use cable ties and
other liable methods to fix it.
●Make sure the face upward as the terminal has
internal GPS and GSM antenna and without
metal blocks. Suggest to install the terminal in
the following places:
1） hiding place below the front windshield
The
trim panel;
2）The hiding place around the front dash(if
the surface is not made of metal);
3）The place under the rear windshield;
Notice: The GSM and GPS signal may be
weakened if there is metal thermal insulation layer
or heating layer on the front windshield, the terminal
may work abnormally, so please change the place
to install the terminal.

- 10 -

5.3 Terminal wiring definition

- 11 -

5.3.1 Power cables and other interface for remote
control

- 12 -

5.3.2 Other accessories’ interfaces

5.4 Terminal wiring diagram
Relay wiring diagram shows how to wire the
relay to control the fuel pump:
5.4.1 Connect the 85 terminal(with small white
cable) to the positive pole of the vehicle
power(+12V/+24V), connect the 86 terminal(with
small yellow cable) to the 4# cable of the terminal.
5.4.2 Cut off the positive pole of the fuel pump, next
serial connect the positive pole to the 87a
terminal(with think green cable) of the relay, and
connect another pole to 30 terminal(with think green

- 13 -

cable), showing as in the figure.
Notice: Be sure that the voltage of the vehicle
power should match up to the working voltage of
the relay, or the relay will be damaged.
Relay Wiring：

Bottom of the relay

- 14 -

-Wiring Diagram

- 15 -

六、Attentions for wiring
6.1 Power cables
6.1.1The standard input voltage of the terminal is
6V-36VD, so please choose the our original power
cables, the red cable is positive and the black
cable is negative; Please ground the positive pole
separately or ground it to ground connection, not
to any other ground.
6.1.2 Connect the ACC cable (orange cable) to
ACC switch of the vehicle, then the position server
can get the information about the vehicle power; the
ACC cable can also be connected directly to the
positive pole of the vehicle power, then the position
server think that the vehicle is always ignited.
6.1.3 Connect the 4# cable (yellow cable) to the 86
terminal(with small yellow cable) of the relay. Use
cable ties to fix the relay to waterproof place, or
use plastic bags to cover the relay..
6.2 External MIC
Using the external MIC cables we can have
remote voice monitoring; stick the MIC to some
places where we can make a call.
6.3 SOS cables
Using SOS cables we can make SOS call.
Please stick the SOS switch to the place where the
driver can touch.
- 16 -

七、Set up the terminal
Please refer to the 《 Operation
Commands》

八、Use the terminal
8.1 Power on
Power on: insert a valid SIM card and wire all
the cables, then the terminal power on itself.
8.2 LED indicators
The red LED flickers fast when the terminal is
searching for GSM network, it flickers
intermittently when the terminal has registered the
GSM network successfully.
The blue LED flickers fast when the terminal is
searching for the GPS satellite signal, it flickers
intermittently when the terminal when the
terminal has searched the satellites and can be
positioned.
8.2 Inquiry position
8.2.1 Inquiry by SMS
You can write a positioning SMS sending to the
terminal when inquiring position, the terminal will
reply position SMS or map link. The SMS
commands please refer to the 《 Operation
Commands》。
8.2.2 Inquiry by position server
- 17 -

Customer can login the position server to
check the position of the vehicle. Please ask your
dealer for the WWW address of the position server.
8.3 SOS alarm
Press the SOS button for 3 seconds when an
emergency situation need help, SOS alarm will be
triggered. The terminal will call the preset manager
numbers circularly until it is answered; and it will
send alarm SMS to the preset manager numbers, it
can also send alarm SMS to the position server.
Notice: SMS and SOS call need preset manager
numbers.
8.4 Monitor
When the preset manager numbers call the
terminal, the terminal will auto-answer after 8
seconds ringing, then you can monitor the voice in
the vehicle. When using the numbers which are not
belong to the managers, the terminal will not
auto-answer.
Notice: This function needs preset manager
numbers.
8.5 Cut off the fuel pump
connection
The position server or the managers can send
cut-off fuel commands when needed. The fuel
of the vehicle will be cut off on the premise of
- 18 -

safety, and the vehicle will not be powered on.
To make sure the safety of the vehicle, the
fuel of the vehicle will be cut off only if the terminal
has positioned by GPS and the speed of the vehicle
is less than 20KM/h or the vehicle is not moving.
8.6 Recover the fuel circuits
The position server or the managers can send
recover-fuel-circuit commands to the terminal
when needed, the terminal will recover the
fuel circuits of the vehicle.

九、Login the position server
If you have a legal ID on the position server,
you can login the position server using browser.
If not, please contact your dealer. Ask your
dealer to provide an ID and the password.
Now open the web site, use your ID and
password to enter the position server.
Notice: Please get the instructions
about the position server from your
dealers.

十、Trouble shooting
10.1 Cannot connect to the
position server
The terminal is never online on the position
- 19 -

server when installed at the first time. Please check
the terminal:
1）If the power cables are wired correctly? Pay
attention to not connect them to the controlling
cables of the vehicle.
2） the SIM card is installed correctly? Please refer
If
to the installation instructions.
3）Check the status of the LED indicators. If the
terminal is OK, the red LED and the blue LED will
intermittently flick.
4） Inquiry the parameters of terminal via commands
and check the accuracy of the parameters.
10.2 Show offline status on the
position server
First check if the LED indicators are OK, if
cannot check them, you can check the SIM card
following next steps:
1） the SIM card of the terminal and check if you
call
can hear the connect ring.
2）Check if the vehicle is in the area where there is
no GSM signal.
3）Check if one terminal or all terminals are offline
in the area where terminal is offline. If all
terminals are offline, you should ask the network
operator. If the network is OK.
4）Check if the SIM card has enough balance.

- 20 -

5）If the terminal becomes offline on the last day of
one month, please check if GPRS is close.
6）Inquiry the parameters of terminal via commands
and check the accuracy of the parameters.
10.3 Cannot position for a long
time
If the GPS is active, but the terminal cannot
be positioned for long time, please check the
terminal:
1）If the vehicle is in the place where there is no
GPS signal.
2）The upside of the terminal should be installed
with face toward the sky.
3）The GSM and GPS signal may be weakened if
the terminal is installed in the place with
electromagnetic wave absorption material(such as
metal blocks), special attention should be paid if
there is metal thermal insulation layer or heating
layer on the front windshield, so that the position
accuracy will decline, and the severe ones will not
be positioned.
10.4 Position drift is serious
Serious position drift will be found in places
where GPS signal is poor. Please drive the vehicle
to the open places.

- 21 -

10.5 Instructions receiving
abnormally
1）Check the instructions format.
2）Check if the vehicle is in the places where there
is GSM signal.
3）Check if the SIM card is properly installed.

十一、Warranty rules
11.1 Special statement
1）Technology change, without notice.
2) If the color and appearance are
inconsistent with those for the actual
product, the latter will prevail.
3）Warranty card is only valid for the
terminals with the following IMEI.
4）Please take care of the warranty
card and show it with the original
purchase receipts when enjoying the
warranty service.
11.2 Warranty period
Since the date of purchase,
passive waste host has one year
warranty.
- 22 -

11.3 After sales
Any of the following circumstances
not covered by the warranty, but
may be appropriate to pay repair:
（一）More than the warranty period.
（二）Unauthorized removal or repair
damaged.
（三） Damage caused by improper
installation, use, maintenance,
custody.
（四）The IMEI label is torn or Obscure.
（五）Warranty certificate and product
models do not match or warranty
certificate be altered.
（六） Damage caused by force
majeure.

- 23 -

Customer’s Information

Name:

Tel:

Add:

Product Model:

IMEI Number：

Selling Unit:

Purchase Date: YY MM DD

- 24 -

Maintenance records
Completion
Date Description Records Engineer
Date

- 25 -

Tk116 user mannual min gsp vehicle tracker

More Related Content

What's hot (18)

Similar to Tk116 user mannual min gsp vehicle tracker (20)

Recently uploaded (20)

Tk116 user mannual min gsp vehicle tracker