Tplo Tibial Plateau Leveling Osteotomy) surgical instruments
1 like958 views
The document provides information on GerVetUSA's return and warranty policy, TPLO surgery technique, and TPLO procedure steps and equipment. GerVetUSA guarantees surgical instruments for life against defects and will repair or replace defective items. TPLO surgery results in rapid recovery, improved range of motion, less arthritis, and return to activity. The procedure involves removing torn ligaments and meniscus and realigning the tibia bone using an osteotomy and plate.
Tplo Tibial Plateau Leveling Osteotomy) surgical instruments
- 2. Returns / Warranty : Stainless Steel Instruments All GerVetUSA surgical instruments are guaranteed for life against manufacturing defects, provided that the instrument is used for its intended surgical purpose. GerVetUSA will either repair or replace the instrument without charge at our discretion*. Our liability under this guarantee shall be limited to repair or replacement of defective merchandise. Our guarantee is unqualified because our own quality control inspectors check GerVetUSA surgical instruments. * Our instruments are carefully examined by our surgical instrument experts. * No instrument is shipped unless it meets our standards. * Tungsten carbide instruments are included except for jaw inserts and Gold handles by a separate warranty. Tibial Plateau Leveling Osteotomy The TPLO surgery techniques results in: Rapid recovery Better range of motion of the joint Less arthritis Return to athletic or working activity TPLO surgery involves removing the torn ends of the cruciate ligament and examining the medial and lateral meniscus cartilages. The meniscus is concurrently torn in about 40 to 50% of dogs that have a torn cruciate ligament. When the femur bone shifts backwards the femur bone pinches the medial meniscus, causing it to tear from the back part of the stifle joint and flip forward. A torn meniscus will make a patient much more painful than a cranial cruciate ligament tear alone. As the patient walks the torn part of the meniscus may flip back and forth resulting in a audible popping or clicking noise. An attempt is made to save as much of the normal meniscus as possible and only trim out the damaged portions of this structure. This is called a partial menisectomy. Which is believed to reduce arthritis. © www.gervetusa.com 2005-2012. All Rights Reserved. 2417 JERICHO TURNPIKE, #333, GARDEN CITY PARK, NY 11040 (USA) TEL: 800.330.1322 | 516.358.2180 FAX: 800.260.7177 | 516.358.2182 eMAIL: sales@GerMedUSA.com
- 3. TibialPlateauLevelingOsteotomy TPLO PROCEDURE 1st step – PROXIMAL “REFERENCE” DRILL BIT PLACEMENT SOFT TISSUE APROACH MEDIAL MENICSUS RELEASE • Locate the joint space on the medial side with a 1 ½“ 22ga. Needle. Walk the needle up the tibia following the medial collateral ligament until the needle drops into the joint space between the femur and the tibia. • Locate the joint space on the lateral side with a 1 ½“ 22ga. Needle. Walk the needle up the tibia directly across from the needle on the medial side. • Drill a hole through the proximal tibia with a 7/64” drill bit. Start at the cranial edge of the medial collateral about 6 mm distal from the needle on the medial side. Drill through the proximal tibia taking care to stay as perpendicular to the sagittal plane of the tibiaas possible. Aim the drill bit to exit the tibia on the lateral side about 6mm distal to the needle on the lateral side. OUTLINE FOR THE ORTHOPEDIC PORTION OF THE TPLO; 1st step – PROXIMAL “REFERENCE” DRILL BIT PLACEMENT 2nd step – MEASURE THE BLADE SIZE 3rd step – ESTABLISH THE DRILL GUIDE STARTING POSITION 4th step - ESTABLISH THE DESIRED AMOUNT OF ROTATION 5th step – OSTEOTOMY 7th step –DRILL FOUR OF THE HOLES TO FASTEN THE PLATE 8th step-REMOVE THE DRILLGUIDE AND FINISH FASTENING THE BONE PLATE CLOSE THE SOFT TISSUE 2nd step – MEASURE THE BLADE SIZE • With the proximal “REFERENCE” drill bit in place, slide a mandrel and blade onto the drill bit. Try different blade sizes. Choose the blade that fits just caudal to the patellar ligament at its attachment to the tibia. • Manually make a mark in the tibia with the chosen saw blade. • Choose the desired tibial plateau angle correction hole and place that hole on a short drill bit placed in the distal hole that was drilled in the tibia in the previous step NOTE; THE NUMBERS ON THE ANGLE GAUGE REFERS TO THE TIBIAL PLAUTEAU ANGLE MEASURED FROM THE PRESURGICAL RADIOGRAPH. A 40 CORRECTION HAS ALREADY BEEN INCLUDED. • Drill a hole in the proximal tibia just distal to the original “REFERENCE “ drill bit using the hole in the drill guide 3rd step – ESTABLISH THE 4th step - ESTABLISH THE that corresponds to the DRILL GUIDE STARTING DESIRED AMOUNT OF blade size that was chosen POSITION ROTATION in the 2nd step. • Place on end of the drill • With the drill guide on the NOTE; YOU MAY HAVE TO guide onto the proximal proximal “REFERENCE “ drill FLIP THE DRILL GUIDE END FOR END TO GET THE “REFERENCE “ drill bit bit, rotate the drill guide CORRECT HOLE OF THE • Using the farthest hole on forward (cranial) DRILL GUIDE ORIENTED ON the other end of the drill • Place the starting point THE PROXIMAL END guide, drill a hole through hole on the angle gauge CLOSE TO THE REFERENCE the tibia centered on the (either the straight version DRILL BIT. bone cranial to caudal. or the round version) on a short drill bit at the distal end of the drill guide 3 © www.gervetusa.com 2005-2012. All Rights Reserved.
- 4. TibialPlateauLevelingOsteotomy 6th step – ROTATE THE PROXIMAL SEGMENT • Place drill bits in the two holes in the proximal segment. • Place the plate on the drill bit that is close to the “REFERENCE “ drill bit NOT ON THE “REFERENCE “ DRILL BIT ITSELF • Place the grill guide back onto these two drill bits in the proximal segment • Using the drill guide as a handle rotate the proximal segment until the distal hole in the drill guide lines up with the distal hole in the tibia • Place a drill bit through the distal drill guide hole and into the distal tibial hole NOTE; IF THE PLATE NEEDS TO BE RESHAPED REMOVE EVERYTHING, RESHAPE THE PLATE AND REPEAT THE 6TH STEP 5th step – OSTEOTOMY • Using the saw blade size chosen in the 2nd step. Make the osteotomy of the proximal tibia with the mandrel of the saw blade on the on the proximal “REFERENCE “drill using the drill bit as a guide. Push the drill bit through the tibia as the saw blade cuts through the bone 7th step –DRILL FOUR OF THE HOLES TO FASTEN THE PLATE • The drill guide will act as a “jig” to hold the proximal segment in the desired orientation while the pone plate if fastened • Use a point to point bone holding forceps to hold the proximal segment tight to the tibial crest. • Drill the two holes in the tibia at the distal ends of the two compression slots of the bone plate • Place screws into the two hole to hold the plate in place. DO NOT TIGHTEN THESE SCREWS YET. • Use the locking screw drill guide and drill the two holes in the proximal segment of the tibia for the two locking screws used on the proximal portion of the bone plate • Fasten the proximal portion of the bone plate to the proximal segment of the tibia using the two locking screws 4 © www.gervetusa.com 2005-2012. All Rights Reserved. 8th step-REMOVE THE DRILLGUIDE AND FINISH FASTENING THE BONE PLATE • Remove the drill guide • Tighten the two screws in the compression slots in the “stem” of the plate to compress the proximal segment of the tibia and the larger distal segment of the tibia together • Place and tighten the last screw on the proximal portion of the plate. (using the hole that drill bit that was holding the drill guide was in) • Use the locking screw drill guide to drill the final hole at the center of the “stem’ of the bone screw. • Place and tighten the final screw • Retighten all of the screws CLOSE THE SOFT TISSUE
- 5. TibialPlateauLevelingOsteotomy GV100-015-06 GV100-015-07 GV100-015-08 GV100-015-09 TPLO Cortex Screw 1.5mm Length 6mm Hex head TPLO Cortex Screw 1.5mm Length 7mm Hex head TPLO Cortex Screw 1.5mm Length 8mm Hex head TPLO Cortex Screw 1.5mm Length 9mm Hex head GV100-015-10 GV100-015-11 GV100-015-12 GV100-015-14 TPLO Cortex Screw 1.5mm Length 10mm Hex head TPLO Cortex Screw 1.5mm Length 11mm Hex head TPLO Cortex Screw 1.5mm Length 12mm Hex head TPLO Cortex Screw 1.5mm Length 14mm Hex head GV100-015-16 GV100-015-18 GV100-015-20 TPLO Cortex Screw 1.5mm Length 16mm Hex head TPLO Cortex Screw 1.5mm Length 18mm Hex head TPLO Cortex Screw 1.5mm Length 20mm Hex head GV101-015-06 TPLO Cortex Screw, Self Tapping 1.5mm Length 6mm Hex head GV101-015-10 TPLO Cortex Screw, Self Tapping 1.5mm Length 10mm Hex head GV100-015-16 TPLO Cortex Screw, Self Tapping 1.5mm Length 16mm Hex head GV101-015-07 TPLO Cortex Screw, Self Tapping 1.5mm Length 7mm Hex head GV101-015-11 TPLO Cortex Screw, Self Tapping 1.5mm Length 11mm Hex head GV100-015-18 TPLO Cortex Screw, Self Tapping 1.5mm Length 18mm Hex head GV101-015-08 TPLO Cortex Screw, Self Tapping 1.5mm Length 8mm Hex head GV101-015-12 TPLO Cortex Screw, Self Tapping 1.5mm Length 12mm Hex head GV100-015-20 TPLO Cortex Screw, Self Tapping 1.5mm Length 20mm Hex head GV101-015-09 TPLO Cortex Screw, Self Tapping 1.5mm Length 9mm Hex head GV100-015-14 TPLO Cortex Screw, Self Tapping 1.5mm Length 14mm Hex head GV100-020-06 TPLO Cortex Screw, 2.0mm Length 6mm Hex head GV100-020-08 TPLO Cortex Screw, 2.0mm TPLO Cortex Screw, 2.0mm Length 16mm Hex head GV100-020-18 TPLO Cortex Screw, 2.0mm Length 18mm Hex head GV100-020-20 TPLO Cortex Screw, 2.0mm Length 20mm Hex head GV100-020-22 TPLO Cortex Screw, 2.0mm Length 22mm Hex head GV100-020-24 TPLO Cortex Screw, 2.0mm GV101-020-08 TPLO Cortex Screw, Self Tapping 2.0mm Length 8mm Hex head GV101-020-16 TPLO Cortex Screw, Self Tapping 2.0mm Length 16mm Hex head GV101-020-24 TPLO Cortex Screw, Self Tapping 2.0mm Length 24mm Hex head GV101-020-10 TPLO Cortex Screw, Self Tapping 2.0mm Length 10mm Hex head GV101-020-18 TPLO Cortex Screw, Self Tapping 2.0mm Length 18mm Hex head GV101-020-26 TPLO Cortex Screw, Self Tapping 2.0mm Length 26mm Hex head GV101-020-12 TPLO Cortex Screw, Self Tapping 2.0mm Length 12mm Hex head GV101-020-20 TPLO Cortex Screw, Self Tapping 2.0mm Length 20mm Hex head GV101-020-28 TPLO Cortex Screw, Self Tapping 2.0mm Length 28mm Hex head GV101-020-14 TPLO Cortex Screw, Self Tapping 2.0mm Length 14mm Hex head GV101-020-22 TPLO Cortex Screw, Self Tapping 2.0mm Length 22mm Hex head GV101-020-30 TPLO Cortex Screw, Self Tapping 2.0mm Length 30mm Hex head Length 8mm Hex head TPLO Cortex Screw, 2.0mm Length 10mm Hex head GV100-020-12 TPLO Cortex Screw, 2.0mm Length 12mm Hex head GV100-020-14 TPLO Cortex Screw, 2.0mm Length 14mm Hex head GV100-020-10 GV100-020-16 Length 24mm Hex head GV100-020-26 TPLO Cortex Screw, 2.0mm Length 26mm Hex head GV100-020-28 TPLO Cortex Screw, 2.0mm Length 28mm Hex head GV100-020-30 TPLO Cortex Screw, 2.0mm Length 30mm Hex head GV101-020-06 TPLO Cortex Screw, Self Tapping 2.0mm Length 6mm Hex head 5 © www.gervetusa.com 2005-2012. All Rights Reserved.
- 6. TibialPlateauLevelingOsteotomy GV102-020-18 GV102-020-10 TPLO 2.0 mm Cancellous Screws - Fully Threaded 10mm Hex Head GV102-020-12 TPLO 2.0 mm Cancellous Screws - Fully Threaded 12mm Hex Head GV102-020-14 TPLO 2.0 mm Cancellous Screws - Fully Threaded 14mm Hex Head GV102-020-16 TPLO 2.0 mm Cancellous Screws - Fully Threaded 16mm Hex Head TPLO 2.0 mm Cancellous Screws - Fully Threaded 18mm Hex Head GV102-020-20 TPLO 2.0 mm Cancellous Screws - Fully Threaded 20mm Hex Head GV102-020-22 TPLO 2.0 mm Cancellous Screws - Fully Threaded 22mm Hex Head GV102-020-24 TPLO 2.0 mm Cancellous Screws - Fully Threaded 24mm Hex Head GV100-024-26 TPLO Cortex Screw 2.4mm, 26mm Length, Self-Tapping, Hex Head GV100-024-28 TPLO Cortex Screw 2.4mm, 28mm Length, Self-Tapping, Hex Head GV100-024-30 TPLO Cortex Screw 2.4mm, 30mm Length, Self-Tapping, Hex Head GV100-024-06 TPLO Cortex Screw 2.4mm, 6mm Length, Self-Tapping, Hex Head GV100-024-16 TPLO Cortex Screw 2.4mm, 16mm Length, Self-Tapping, Hex Head GV100-024-32 TPLO Cortex Screw 2.4mm, 32mm GV100-024-08 TPLO Cortex Screw 2.4mm, 8mm Length, Self-Tapping ,Hex Head GV100-024-18 TPLO Cortex Screw 2.4mm, 18mm GV100-024-34 TPLO Cortex Screw 2.4mm, 34mm GV100-024-10 TPLO Cortex Screw 2.4mm, 10mm GV100-024-20 TPLO Cortex Screw 2.4mm, 20mm GV100-024-36 TPLO Cortex Screw 2.4mm, 36mm GV100-024-22 TPLO Cortex Screw 2.4mm, 22mm GV100-024-38 TPLO Cortex Screw 2.4mm, 38mm GV100-024-24 TPLO Cortex Screw 2.4mm, 24mm GV100-024-40 TPLO Cortex Screw 2.4mm, 40mm Length, Self-Tapping , Hex Head GV100-024-12 TPLO Cortex Screw 2.4mm, 12mm Length, Self-Tapping, Hex Head GV100-024-14 TPLO Cortex Screw 2.4mm, 14mm Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head GV101-027-30 TPLO Cortex Screw 2.7mm, 30mm Length, Hex Head GV101-027-06 TPLO Cortex Screw 2.7mm, 6mm Length, Hex Head GV101-027-08 TPLO Cortex Screw 2.7mm, 8mm Length, Hex Head GV101-027-10 TPLO Cortex Screw 2.7mm, 10mm Length, Hex Head GV101-027-12 TPLO Cortex Screw 2.7mm, 12mm Length, Hex Head GV101-027-14 TPLO Cortex Screw 2.7mm, 14mm Length, Hex Head GV101-027-16 TPLO Cortex Screw 2.7mm, 16mm Length, Hex Head GV101-027-18 TPLO Cortex Screw 2.7mm, 18mm Length, Hex Head GV101-027-20 TPLO Cortex Screw 2.7mm, 20mm Length, Hex Head GV101-027-22 TPLO Cortex Screw 2.7mm, 22mm Length, Hex Head GV101-027-24 TPLO Cortex Screw 2.7mm, 24mm Length, Hex Head GV101-027-26 TPLO Cortex Screw 2.7mm, 26mm Length, Hex Head GV101-027-28 TPLO Cortex Screw 2.7mm, 28mm Length, Hex Head GV101-027-32 TPLO Cortex Screw 2.7mm, 32mm Length, Hex Head GV101-027-34 TPLO Cortex Screw 2.7mm, 34mm Length, Hex Head GV101-027-36 TPLO Cortex Screw 2.7mm, 36mm Length, Hex Head GV101-027-38 TPLO Cortex Screw 2.7mm, 38mm Length, Hex Head GV101-027-40 TPLO Cortex Screw 2.7mm, 40mm Length, Hex Head GV102-027-26 TPLO Cortex Screw 2.7mm, 26mm Length, Self-Tapping, Hex Head GV102-027-28 TPLO Cortex Screw 2.7mm, 28mm Length, Self-Tapping, Hex Head GV102-027-06 TPLO Cortex Screw 2.7mm, 6mm Length, Self-Tapping ,Hex Head GV102-027-16 TPLO Cortex Screw 2.7mm, 16mm GV102-027-08 TPLO Cortex Screw 2.7mm, 8mm Length, Self-Tapping, Hex Head GV102-027-18 TPLO Cortex Screw 2.7mm, 18mm GV102-027-10 TPLO Cortex Screw 2.7mm, 10mm GV102-027-20 TPLO Cortex Screw 2.7mm, 20mm GV102-027-12 TPLO Cortex Screw 2.7mm, 12mm GV102-027-22 TPLO Cortex Screw 2.7mm, 22mm GV102-027-14 TPLO Cortex Screw 2.7mm, 14mm GV102-027-24 TPLO Cortex Screw 2.7mm, 24mm Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head Length, Self-Tapping, Hex Head 6 © www.gervetusa.com 2005-2012. All Rights Reserved. GV102-027-30 TPLO Cortex Screw 2.7mm, 30mm Length, Self-Tapping, Hex Head GV102-027-32 TPLO Cortex Screw 2.7mm, 32mm Length, Self-Tapping, Hex Head GV102-027-34 TPLO Cortex Screw 2.7mm, 34mm Length, Self-Tapping, Hex Head GV102-027-36 TPLO Cortex Screw 2.7mm, 36mm Length, Self-Tapping, Hex Head GV102-027-38 TPLO Cortex Screw 2.7mm, 38mm Length, Self-Tapping, Hex Head GV102-027-40 TPLO Cortex Screw 2.7mm, 40mm Length, Self-Tapping, Hex Head
- 7. TibialPlateauLevelingOsteotomy GV101-030-22 TPLO 3.0 mm Cancellous Screws Fully Threaded, 22mm Length GV101-030-24 TPLO 3.0 mm Cancellous Screws Fully Threaded, 24mm Length GV101-030-26 TPLO 3.0 mm Cancellous Screws Fully Threaded, 26mm Length GV101-030-28 TPLO 3.0 mm Cancellous Screws Fully Threaded, 28mm Length GV101-030-30 TPLO 3.0 mm Cancellous Screws Fully Threaded, 30mm Length GV101-030-32 TPLO 3.0 mm Cancellous Screws Fully Threaded, 32mm Length GV101-030-34 TPLO 3.0 mm Cancellous Screws Fully Threaded, 34mm Length GV101-030-36 TPLO 3.0 mm Cancellous Screws Fully Threaded, 36mm Length GV101-030-10 TPLO 3.0 mm Cancellous Screws Fully Threaded, 10mm Length GV101-030-16 TPLO 3.0 mm Cancellous Screws - GV101-030-12 TPLO 3.0 mm Cancellous Screws Fully Threaded, 12mm Length GV101-030-18 TPLO 3.0 mm Cancellous Screws - GV101-030-14 TPLO 3.0 mm Cancellous Screws - GV101-030-20 TPLO 3.0 mm Cancellous Screws - Fully Threaded, 14mm Length Fully Threaded, 16mm Length GV101-030-38 TPLO 3.0 mm Cancellous Screws Fully Threaded, 38mm Length Fully Threaded, 18mm Length Fully Threaded, 20mm Length GV101-030-40 TPLO 3.0 mm Cancellous Screws Fully Threaded, 40mm Length GV101-035-26 TPLO Cortex Screw 3.5mm, 26mm Length, Hex Head GV101-035-28 TPLO Cortex Screw 3.5mm, 28mm Length, Hex Head GV101-035-30 TPLO Cortex Screw 3.5mm, 30mm Length, Hex Head GV101-035-32 TPLO Cortex Screw 3.5mm, 32mm Length, Hex Head GV101-035-34 TPLO Cortex Screw 3.5mm, 34mm Length, Hex Head GV101-035-36 TPLO Cortex Screw 3.5mm, 36mm Length, Hex Head GV101-035-38 TPLO Cortex Screw 3.5mm, 38mm Length, Hex Head GV101-035-40 TPLO Cortex Screw 3.5mm, 40mm Length, Hex Head GV101-035-42 TPLO Cortex Screw 3.5mm, 42mm Length, Hex Head GV101-035-44 TPLO Cortex Screw 3.5mm, 44mm Length, Hex Head GV101-035-10 TPLO Cortex Screw 3.5mm, 10mm Length, Hex Head GV101-035-18 TPLO Cortex Screw 3.5mm, 18mm GV101-035-45 TPLO Cortex Screw 3.5mm, 45mm GV101-035-12 TPLO Cortex Screw 3.5mm, 12mm Length, Hex Head GV101-035-20 TPLO Cortex Screw 3.5mm, 20mm Length, Hex Head GV101-035-46 TPLO Cortex Screw 3.5mm, 46mm GV101-035-14 TPLO Cortex Screw 3.5mm, 14mm Length, Hex Head GV101-035-22 TPLO Cortex Screw 3.5mm, 22mm Length, Hex Head GV101-035-48 TPLO Cortex Screw 3.5mm, 48mm GV101-035-16 TPLO Cortex Screw 3.5mm, 16mm Length, Hex Head GV101-035-24 TPLO Cortex Screw 3.5mm, 24mm Length, Hex Head GV101-035-50 TPLO Cortex Screw 3.5mm, 50mm Length, Hex Head Length, Hex Head 7 © www.gervetusa.com 2005-2012. All Rights Reserved. Length, Hex Head Length, Hex Head Length, Hex Head
- 8. TibialPlateauLevelingOsteotomy GV102-035-26 TPLO Cortex Screw, Self Tapping 3.5mm, 26mm Length, Hex Head GV102-035-28 TPLO Cortex Screw, Self Tapping 3.5mm, 28mm Length, Hex Head GV102-035-30 TPLO Cortex Screw, Self Tapping 3.5mm, 30mm Length, Hex Head GV102-035-32 TPLO Cortex Screw, Self Tapping 3.5mm, 32mm Length, Hex Head GV102-035-34 TPLO Cortex Screw, Self Tapping 3.5mm, 34mm Length, Hex Head GV102-035-36 TPLO Cortex Screw, Self Tapping 3.5mm, 36mm Length, Hex Head GV102-035-38 TPLO Cortex Screw, Self Tapping 3.5mm, 38mm Length, Hex Head GV102-035-40 TPLO Cortex Screw, Self Tapping 3.5mm, 40mm Length, Hex Head GV102-035-42 TPLO Cortex Screw, Self Tapping 3.5mm, 42mm Length, Hex Head GV102-035-44 TPLO Cortex Screw, Self Tapping 3.5mm, 44mm Length, Hex Head GV102-035-10 TPLO Cortex Screw, Self Tapping 3.5mm, 10mm Length, Hex Head GV102-035-18 TPLO Cortex Screw, Self Tapping GV102-035-45 TPLO Cortex Screw, Self Tapping GV102-035-12 TPLO Cortex Screw, Self Tapping 3.5mm, 12mm Length, Hex Head GV102-035-20 TPLO Cortex Screw, Self Tapping GV102-035-46 TPLO Cortex Screw, Self Tapping GV102-035-14 TPLO Cortex Screw, Self Tapping 3.5mm, 14mm Length, Hex Head GV102-035-22 TPLO Cortex Screw, Self Tapping GV102-035-48 TPLO Cortex Screw, Self Tapping GV102-035-16 TPLO Cortex Screw, Self Tapping GV102-035-24 TPLO Cortex Screw, Self Tapping GV102-035-50 TPLO Cortex Screw, Self Tapping GV101-040-12 TPLO 4.0 mm Cancellous Screws GV101-040-35 TPLO 4.0 mm Cancellous Screws GV101-040-14 TPLO 4.0 mm Cancellous Screws GV101-040-36 TPLO 4.0 mm Cancellous Screws GV101-040-16 TPLO 4.0 mm Cancellous Screws GV101-040-40 TPLO 4.0 mm Cancellous Screws GV101-040-18 TPLO 4.0 mm Cancellous Screws GV101-040-42 TPLO 4.0 mm Cancellous Screws GV101-040-20 TPLO 4.0 mm Cancellous Screws GV101-040-44 TPLO 4.0 mm Cancellous Screws GV101-040-22 TPLO 4.0 mm Cancellous Screws GV101-040-45 TPLO 4.0 mm Cancellous Screws GV101-040-24 TPLO 4.0 mm Cancellous Screws GV101-040-46 TPLO 4.0 mm Cancellous Screws GV101-040-26 TPLO 4.0 mm Cancellous Screws GV101-040-48 TPLO 4.0 mm Cancellous Screws GV101-040-28 TPLO 4.0 mm Cancellous Screws GV101-040-50 TPLO 4.0 mm Cancellous Screws GV101-040-30 TPLO 4.0 mm Cancellous Screws GV101-040-52 TPLO 4.0 mm Cancellous Screws GV101-040-32 TPLO 4.0 mm Cancellous Screws GV101-040-55 TPLO 4.0 mm Cancellous Screws GV101-040-34 TPLO 4.0 mm Cancellous Screws GV101-040-60 TPLO 4.0 mm Cancellous Screws 3.5mm, 16mm Length, Hex Head 3.5mm, 18mm Length, Hex Head 3.5mm, 20mm Length, Hex Head 3.5mm, 22mm Length, Hex Head 3.5mm, 24mm Length, Hex Head - Fully Threaded 12mm Length, Hex Head - Fully Threaded 14mm Length, Hex Head - Fully Threaded 16mm Length, Hex Head - Fully Threaded 18mm Length, Hex Head - Fully Threaded 20mm Length, Hex Head - Fully Threaded 22mm Length, Hex Head - Fully Threaded 24mm Length, Hex Head - Fully Threaded 26mm Length, Hex Head - Fully Threaded 28mm Length, Hex Head - Fully Threaded 30mm Length, Hex Head - Fully Threaded 32mm Length, Hex Head GV101-040-10 TPLO 4.0 mm Cancellous Screws - Fully Threaded 10mm Length, Hex Head - Fully Threaded 34mm Length, Hex Head 8 © www.gervetusa.com 2005-2012. All Rights Reserved. 3.5mm, 45mm Length, Hex Head 3.5mm, 46mm Length, Hex Head 3.5mm, 48mm Length, Hex Head 3.5mm, 50mm Length, Hex Head - Fully Threaded 35mm Length, Hex Head - Fully Threaded 36mm Length, Hex Head - Fully Threaded 40mm Length, Hex Head - Fully Threaded 42mm Length, Hex Head - Fully Threaded 44mm Length, Hex Head - Fully Threaded 45mm Length, Hex Head - Fully Threaded 46mm Length, Hex Head - Fully Threaded 48mm Length, Hex Head - Fully Threaded 50mm Length, Hex Head - Fully Threaded 52mm Length, Hex Head - Fully Threaded 55mm Length, Hex Head - Fully Threaded 60mm Length, Hex Head
- 9. TibialPlateauLevelingOsteotomy GV102-040-12 TPLO 4.0 mm Cancellous Screws - GV102-040-35 TPLO 4.0 mm Cancellous Screws - GV102-040-14 TPLO 4.0 mm Cancellous Screws - GV102-040-36 TPLO 4.0 mm Cancellous Screws - GV102-040-16 TPLO 4.0 mm Cancellous Screws - GV102-040-40 TPLO 4.0 mm Cancellous Screws - GV102-040-18 TPLO 4.0 mm Cancellous Screws - GV102-040-42 TPLO 4.0 mm Cancellous Screws GV102-040-20 TPLO 4.0 mm Cancellous Screws - GV102-040-44 TPLO 4.0 mm Cancellous Screws - GV102-040-22 TPLO 4.0 mm Cancellous Screws - GV102-040-45 TPLO 4.0 mm Cancellous Screws - GV102-040-24 TPLO 4.0 mm Cancellous Screws - GV102-040-46 TPLO 4.0 mm Cancellous Screws - GV102-040-26 TPLO 4.0 mm Cancellous Screws - GV102-040-48 TPLO 4.0 mm Cancellous Screws - GV102-040-28 TPLO 4.0 mm Cancellous Screws - GV102-040-50 TPLO 4.0 mm Cancellous Screws - GV102-040-30 TPLO 4.0 mm Cancellous Screws - GV102-040-52 TPLO 4.0 mm Cancellous Screws - GV102-040-32 TPLO 4.0 mm Cancellous Screws - GV102-040-55 TPLO 4.0 mm Cancellous Screws - GV102-040-34 TPLO 4.0 mm Cancellous Screws - GV102-040-60 TPLO 4.0 mm Cancellous Screws - GV101-045-18 TPLO Cortical Screw 4.5mm L= 18mm Hex Head GV101-045-46 TPLO Cortical Screw 4.5mm L= 46mm Hex Head GV101-045-20 TPLO Cortical Screw 4.5mm L= 20mm Hex Head GV101-045-48 TPLO Cortical Screw 4.5mm L= 48mm Hex Head GV101-045-22 TPLO Cortical Screw 4.5mm L= 22mm Hex Head GV101-045-52 TPLO Cortical Screw 4.5mm L= 52mm Hex Head GV101-045-24 TPLO Cortical Screw 4.5mm L= 24mm Hex Head GV101-045-50 TPLO Cortical Screw 4.5mm L= 50mm Hex Head GV101-045-26 TPLO Cortical Screw 4.5mm L= 26mm Hex Head GV101-045-56 TPLO Screw 4.5mm L= 56mm Hex Head GV101-045-28 TPLO Cortical Screw 4.5mm L= 28mm Hex Head GV101-045-60 TPLO Cortical Screw 4.5mm L= 60mm Hex Head GV101-045-30 TPLO Cortical Screw 4.5mm L= 30mm Hex Head GV101-045-65 TPLO Cortical Screw 4.5mm L= 65mm Hex Head GV101-045-32 TPLO Cortical Screw 4.5mm L= 32mm Hex Head GV101-045-70 TPLO Cortical Screw 4.5mm L= 70mm Hex Head GV101-045-34 TPLO Cortical Screw 4.5mm L= 34mm Hex Head GV101-045-75 TPLO Cortical Screw 4.5mm L= 75mm Hex Head GV101-045-36 TPLO Cortical Screw 4.5mm L= 36mm Hex Head GV101-045-80 TPLO Cortical Screw 4.5mm L= 80mm Hex Head GV101-045-38 TPLO Cortical Screw 4.5mm L= 38mm Hex Head GV101-045-85 TPLO Cortical Screw 4.5mm L= 85mm Hex Head GV101-045-12 TPLO Cortical Screw 4.5mm L= 12mm Hex Head GV101-045-40 TPLO Cortical Screw 4.5mm L= 40mm Hex Head GV101-045-90 TPLO Cortical Screw 4.5mm L= 90mm Hex Head GV101-045-14 TPLO Cortical Screw 4.5mm L= 14mm Hex Head GV101-045-42 TPLO Cortical Screw 4.5mm L= 42mm Hex Head GV101-045-100 TPLO Cortical Screw 4.5mm GV101-045-16 TPLO Cortical Screw 4.5mm L= 16mm Hex Head GV101-045-44 TPLO Cortical Screw 4.5mm L= 44mm Hex Head GV101-045-110 TPLO Cortical Screw 4.5mm Partially Threaded 12mm Length, Hex Head Partially Threaded 14mm Length, Hex Head Partially Threaded 16mm Length, Hex Head Partially Threaded 18mm Length, Hex Head Partially Threaded 20mm Length, Hex Head Partially Threaded 22mm Length, Hex Head Partially Threaded 24mm Length, Hex Head Partially Threaded 26mm Length, Hex Head Partially Threaded 28mm Length, Hex Head Partially Threaded 30mm Length, Hex Head Partially Threaded 32mm Length, Hex Head GV102-040-10 TPLO 4.0 mm Cancellous Screws - Partially Threaded 10mm Length, Hex Head Partially Threaded 34mm Length, Hex Head 9 © www.gervetusa.com 2005-2012. All Rights Reserved. Partially Threaded 35mm Length, Hex Head Partially Threaded 36mm Length, Hex Head Partially Threaded 40mm Length, Hex Head -Partially Threaded 42mm Length, Hex Head Partially Threaded 44mm Length, Hex Head Partially Threaded 45mm Length, Hex Head Partially Threaded 46mm Length, Hex Head Partially Threaded 48mm Length, Hex Head Partially Threaded 50mm Length, Hex Head Partially Threaded 52mm Length, Hex Head Partially Threaded 55mm Length, Hex Head Partially Threaded 60mm Length, Hex Head L= 100mm Hex Head L= 110mm Hex Head
- 10. TibialPlateauLevelingOsteotomy GV102-045-18 TPLO Cortical Screw 4.5 mm - Self- GV102-045-46 TPLO Cortical Screw 4.5mm - Self- GV102-045-20 TPLO Cortical Screw 4.5 mm - Self- GV102-045-48 TPLO Cortical Screw 4.5mm- Self- GV102-045-22 TPLO Cortical Screw 4.5 mm - Self- GV102-045-52 TPLO Cortical Screw 4.5mm - Self- GV102-045-24 TPLO Cortical Screw 4.5 mm - Self- GV102-045-50 TPLO Cortical Screw 4.5mm - Self- GV102-045-26 TPLO Cortical Screw 4.5 mm - SelfTapping L= 26mm Hex Head GV102-045-56 TPLO Cortical Screw 4.5mm- Self- GV102-045-28 TPLO Cortical Screw 4.5 mm - Self- GV102-045-60 TPLO Cortical Screw 4.5mm - Self- GV102-045-30 TPLO Cortical Screw 4.5 mm - Self- GV102-045-65 TPLO Cortical Screw 4.5mm- Self- GV102-045-32 TPLO Cortical Screw 4.5 mm - Self- GV102-045-70 TPLO Cortical Screw 4.5mm- Self- GV102-045-34 TPLO Cortical Screw 4.5mm - Self- GV102-045-75 TPLO Cortical Screw 4.5mm - Self- GV102-045-36 TPLO Cortical Screw 4.5mm - Self- GV102-045-80 TPLO Cortical Screw 4.5mm - Self- GV102-045-38 TPLO Cortical Screw 4.5mm- Self- GV102-045-85 TPLO Cortical Screw 4.5mm - Self- GV102-045-12 TPLO Cortical Screw 4.5 mm - Self- GV102-045-40 TPLO Cortical Screw 4.5mm- Self- GV102-045-90 TPLO Cortical Screw 4.5mm - Self- GV102-045-14 TPLO Cortical Screw 4.5 mm - Self- GV102-045-42 TPLO Cortical Screw 4.5mm - Self- GV102-045-100 TPLO Cortical Screw 4.5mm - SelfTapping L= 100mm Hex Head GV102-045-44 TPLO Cortical Screw 4.5mm - Self- GV102-045-110 TPLO Cortical Screw 4.5mm - Self- Tapping L= 18mm Hex Head Tapping L= 20mm Hex Head Tapping L= 22mm Hex Head Tapping L= 24mm Hex Head Tapping L= 28mm Hex Head Tapping L= 30mm Hex Head Tapping L= 32mm Hex Head Tapping L= 34mm Hex Head Tapping L= 36mm Hex Head Tapping L= 38mm Hex Head Tapping L= 12mm Hex Head Tapping L= 14mm Hex Head Tapping L= 40mm Hex Head Tapping L= 42mm Hex Head Tapping L= 44mm Hex Head Tapping L= 46mm Hex Head Tapping L= 48mm Hex Head Tapping L= 52mm Hex Head Tapping L= 50mm Hex Head Tapping L= 56mm Hex Head Tapping L= 60mm Hex Head Tapping L= 65mm Hex Head Tapping L= 70mm Hex Head Tapping L= 75mm Hex Head Tapping L= 80mm Hex Head Tapping L= 85mm Hex Head Tapping L= 90mm Hex Head Tapping L= 110mm Hex Head GV100-15 TPLO Saw Blade 15mm GV100-21 TPLO Saw Blade 21mm GV100-27 TPLO Saw Blade 27mm GV100-18 TPLO Saw Blade 18mm GV100-24 TPLO Saw Blade 24mm GV100-30 TPLO Saw Blade 30mm 10 © www.gervetusa.com 2005-2012. All Rights Reserved.
- 11. TibialPlateauLevelingOsteotomy GV200-21 TPLO Mandrel (Hub Assembly) 15/18mm GV200-27 TPLO Mandrel (Hub Assembly) 21/27mm GV200-30 TPLO Mandrel (Hub Assembly) 24/30mm GV300-07-L GV300-07-R Small T Plate Oblique 3.5mm, 3x4 Hole, 12mm Left Small T Plate Oblique 3.5mm, 3x4 Hole, 12mm Right GV300-09-L Small T Plate Oblique 2.7mm, 3x3 Hole, 8mm Left GV300-09-R Small T Plate Oblique 2.7mm, 3x3 Hole, 8mm Right GV300-08-L Small T Plate Oblique 3.5mm, 3x3 Hole, 11mm Left GV300-10 TPLO Angled Plate 15 Left/Right GV300-08-R Small T Plate Oblique 3.5mm, 3x3 Hole, 11mm Right 11 © www.gervetusa.com 2005-2012. All Rights Reserved.
- 12. TibialPlateauLevelingOsteotomy GV700-01 GV500-00 TPLO Drill Guide Drill hole markings, 21/27, 24/30 TPLO box for cortical screws 2.4mm GV700-02 TPLO Drill Guide, Drill hole markings 15/18 GV500-01 GV400-02 TPLO box for cortical screws 2.7mm 12 © www.gervetusa.com 2005-2012. All Rights Reserved. TPLO Angled Drill Guide GV500-02 TPLO box for cortical screws 3.5mm