TPP-93
- 1. Specifications subject to change without notice. Chart dimensions rounded up to the next whole millimeter (inches rounded up to the next 1/8" ). ROUGH-IN DATA Model: TRUE EUROPE Project Name: Location: Item #: Qty: Model #: AIA # SIS #Field's End Road, Goldthorpe, Nr. Rotherham, South Yorkshire S63 9EU, UK www.truemfg.com • Tel +44 01709 888 080 • Fax +44 01709 880 838 Free Phone 0 800 783 2049 • Free Phone to U.S. 0 800 894 928 Printed in U.S.A. APPROVALS: AVAILABLE AT: TPP-93 TRUE REFRIGERATION MADE IN SINCE 1945 U.S.A. ® Food Prep Table: Solid Door Pizza Prep Table TPP-93 True’s pizza prep tables are designed with enduring quality that protects your long term investment. Oversized, environmentally friendly (R134A) forced-air refrigeration system holds 33°F to 41°F (.5°C to 5°C). Complies with and listed under ANSI/NSF-7-1997-6.3. All stainless steel front, top and ends. Matching aluminum finished back. Stainless steel, patented, foam insulated flat lids keep pan temperatures colder, lock in freshness, and minimize condensation. Extra-deep 191/2 (496 mm) full length removable cutting board included. Sanitary, high density, NSF approved white polyethylene provides tough preparation surface. Heavy duty PVC coated wire shelves. Foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Model Doors Shelves Pans (Top) Cabinet Dimensions (mm) HP Voltage Amps NEMA Config. Cord Length (total m) Crated Weight (kg)L D H TPP-93 3 6 12 2369 820 1068 1/2 230-240/50/1 4.2 ▲ 2.13 275 ** Length does not include 1/4 (7 mm) each side for cutting board brackets and thumb screws. † Depth does not include 26mm (1) for rear bumpers and 77mm (3) for cutting board. ▲Plug type varies by country. 5/14
- 2. STANDARD FEATURES Model: TRUE EUROPE Field's End Road, Goldthorpe, Nr. Rotherham, South Yorkshire S63 9EU, UK • +44 01709 888 080 • Fax +44 01709 880 838 • Free Phone 0 800 783 2049 • Free Phone to U.S. 0 800 894 928 • www.truemfg.com METRIC DIMENSIONS ROUNDED UP TO THE NEAREST WHOLE MILLIMETER SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PLAN VIEW KCL TPP-93 DESIGN • True’s commitment to using the highest quality materials and oversized refrigeration systems provides the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today’s food service marketplace. REFRIGERATION SYSTEM • Factory engineered, self-contained, capillary tube system using environmentally friendly (CFC free) 134A refrigerant. • Oversized, factory balanced refrigeration system with guided airflow to provide uniform temperature in food pan rail and cabinet interior. • Forced-air design holds 33°F to 41°F (.5°C to 5°C) product temperature in food pans and cabinet interior. Complies with and listed under ANSI/NSF-7-1997-6.3. • Condensing unit accessed from behind front removable panel, slides out for easy maintenance. CABINET CONSTRUCTION • Exterior - stainless steel front, top and ends. Matching aluminum finished back. • Interior - attractive, NSF approved, white aluminum liner. Stainless steel floor with coved corners. • Insulation - entire cabinet structure and solid doors are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). • 5 (127 mm) diameter stem castors. 36 (915 mm) work surface height. DOORS • Stainless steel exterior with white aluminum liner to match cabinet interior. • Each door fitted with 12 (305 mm) long recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment. • Positive seal doors swing within cabinet dimensions. • Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. SHELVING • Six (6) adjustable, heavy duty PVC coated wire shelves. Two (2) right and two (2) left section shelf dimensions are 235/8L x 28D (601 mm x 712 mm). Center door shelf dimensions are 251/2L x 28D (648 mm x 712 mm). Four (4) chrome plated shelf clips included per shelf. • Shelf support pilasters made of same material as cabinet interior; shelves are adjustable on 1/2 (13 mm) increments. MODEL FEATURES • Evaporator is epoxy coated to eliminate the potential of corrosion. • Extra-deep 191/2 (496 mm), full length removable cutting board included. Sanitary, high-density, NSF approved white polyethylene provides tough preparation surface. • Stainless steel, patented, foam insulated flat lids keep pan temperatures colder, lock in freshness, and minimize condensation. • Refrigerated pan rail comes standard with twelve (1/3size) 123/4L x 61/4”W x 6D (324 mm x 159 mm x 153 mm) NSF approved clear polycarbonate insert pans. • NSF-7 compliant for open food product. ELECTRICAL • Unit completely pre-wired at factory and ready for final connection to a 230-240/50/1 phase dedicated outlet. • Plug type varies by country. OPTIONAL FEATURES/ACCESSORIES Upcharge and lead times may apply. ❑❑ 230 - 240V / 50 Hz. ❑❑ 6 (153 mm) standard legs. ❑❑ 6 (153 mm) seismic/flanged legs. ❑❑ 4 (102 mm) diameter castors. ❑❑ 3 (85 mm) diameter castors. ❑❑ 21/2 (64 mm) diameter castors. ❑❑ Barrel locks (factory installed). Requires one per door. ❑❑ Garnish racks. ❑❑ Half bun tray rack. Each holds up to eleven 18L x 26D (458 mm x 661 mm) sheet pans (sold separately). ❑❑ 191/2 (496 mm) deep, 3/4 (19 mm) thick, white polyethylene cutting board. ❑❑ 191/2 (496 mm) deep, 1/2 (13 mm) thick, composite cutting board. ❑❑ Half bun tray racks. Holds up to eleven 18L x 26D (458 mm x 661 mm) sheet pans (sold separately). ❑❑ Exterior round digital temperature display (factory installed). ❑❑ Remote cabinets (condensing unit supplied by others; system comes standard with 404A expansion valve and requires R404A refrigerant). Consult factory technical service department for BTU information. All remote units must be hard wired during installation. Food Prep Table: Solid Door Pizza Prep Table Model Elevation Right Plan 3D Back TPP-93