Types of Resistor
- 2. Resistors can be classified on various types based on various factors. Some of the classification of resistors are: • Based on conductive properties of resistor. • Based on resistor’s value. • Based on composition.
- 3. BASED ON CONDUCTIVE PROPERTIES OF RESISTOR: • Linear Resistor A linear resistor is the type of resistor whose resistance remains constant with increase in the potential difference or voltage applied to it. The Resistance or Current passed through the resistor does not changes as the applied voltage ( P.D ) changes. The V-I characteristics of such resistor is a straight line as shown on the figure below or in other words these types of resistors follows Ohm’s Law very strictly.
- 4. R V-I Characteristics of Resistor
- 5. • Non-linear Resistor Non-Linear Resistor are those types of resistors in which the Current passed through it is not exactly directly proportional to the Potential Difference applied to it. These types of resistors have non-liner V-I characteristics and does not strictly follows ohm’s Law.
- 7. BASED ON RESISTOR’S VALUE • Fixed Value Resistor Fixed value resistors are those types of resistors whose value is fixed already while manufacturing and cannot be changed during it’s usage.
- 8. • Variable Resistor or Potentiometer Variable Resistors or Potentiometers are those types of resistors whose Value can be changed during it’s usage.
- 9. These types of resistor usually contains a shaft which can be rotated or moved by hand or a screw driver to change it’s value in between a fixed range for ex. 0 Kilo Ohms to 20 Kilo Ohms.
- 10. • Package Resistor These types of resistor is a resistor which contains a package which contains two or more resistors inside it It have many terminals and the resistor’s resistance can be chosen by using any two terminals among the available terminals or can also be used as an resistor array for various purposes.
- 11. BASED ON COMPOSITION • Carbon Composition These types of resistors are made by a composition of Carbon Particles which are hold together by a binding resign. The proportion of carbon particles and resign used determines the value of the resistor. At both ends of the composition a Metal Cap with a small rod of tin is attached to solder it or use it in circuits , then the whole package is enclosed in a plastic case to prevent moisture and reaction with air.
- 12. These types of resistors normally produces noise in circuit due to electron passing through one carbon particle to another , thus these types or resistors are not used in critical circuits although they are cheap.
- 13. • Carbon Deposition The resistor which is made by depositing a thin layer of carbon around a ceramic rod is called Carbon Deposition resistor. They are made by heating a ceramic rod inside a flask of methane and depositing the carbon around it by using Glass Cracking process. The value of resistor is determined by the amount of carbon deposited around the ceramic rod.
- 14. • High Voltage Ink Film These types of resistors are made by coating a special resistive ink in a helical band above a ceramic base. These resistors can withstand very high voltage of up to one thousands of kilo voltages and usually have high resistance too ranging from on kilo ohms to one hundred thousand mega ohms.
- 15. • Metal Film Metal film resistors are made by depositing vaporized metal in vacuum on a ceramic core rod. these types of resistors are very reliable , have high tolerance and also have high temperature coefficient. These types of resistors are costlier compared to other but are used in critical systems.
- 16. • Metal Glaze Metal Glaze resistors are made up of glass and metal which is mixed and applied as a thick films to a ceramic substrate and then fired to form a film.
- 17. • Wire Wound Wire wound resistor are made by winding a metal wire around a ceramic core. The metal wire is an alloy of various metals based on the characteristics and resistance of the resistor required. These types of resistor have high stability and can also withstand high powers but are usually bulkier compared to other types of resistors.
- 18. • Ceramic Metal These types of resistor are made by firing certain metals blended with ceramics on a ceramic substrate. The proportion of the mixture in the blended ceramic and metal determines the value of the resistor. These type of resistors are very stable and also have accurate resistance. These types of resistors are mostly used as Surface Mount type resistor for using in SMD PCB.