Understanding of Material Property : Theory, Principle and Application March 2013
1 like454 views
The document details a training course on engineering materials and their properties, scheduled for March 7-8, 2013, at Universiti Sains Malaysia, Penang. The course, aimed at personnel in the semiconductor and electronics industries, covers various material properties, and is coordinated by Associate Professor Dr. Cheong Kuan Yew. Registration fees are MYR 2,250 per participant, with a group discount available, and the training includes theoretical concepts as well as practical applications.
![REGISTRATION FORM
UNDERSTANDING OF MATERIAL PROPERTY : THEORY, PRINCIPLE AND APPLICATION –
MARCH 2013
Send registration form to :
Att: Khairol Anuar, USAINS Holding Sdn. Bhd., Ground Floor, Kompleks EUREKA,
Universiti Sains Malaysia, 11800 USM, PENANG.
Fax : +604-657 2210
Email : khairol@usainsgroup.com / khairol_usains@yahoo.com / usains.holding@hotmail.com
NO. PARTICIPANT NAME POSITION & EMAIL
1.
2.
3.
4.
5.
Company:
Address:
Postcode:
Contact Person: Mobile Phone:
Telephone No.: Fax No.: E-mail:
Mode of Payment Number Bank No. of Participants:
I enclose Crossed Cheque
Bank Draft Group Discount:
Money Order
LO/PO Total Sum (MYR)
Cheque / Bank Draft / Money Order / LO / PO must be made payable to ‘USAINS HOLDING SDN. BHD.’.
1. Bank Transfer [Please fax your Bank-in Slip (Print your name & details on the slip)].
Payee Name: USAINS Holding Sdn. Bhd.
Details: UNDERSTANDING OF MATERIAL PROPERTY – MARCH 2013
Name of Bank: CIMB Bank Berhad (USM Branch), Universiti Sains Malaysia, 11800 USM Penang.
Account Number: 0709-0006708-05-7
2. A Local Order (LO) or Purchase Order (PO) must be presented before the event.
The Organizer reserves the right to refrain a registered participant from taking part in the event if no proof of payment can
be presented. This only applies to registered participants who have NOT paid the registration fee PRIOR to the event date.
3. Cancellation / Substitution
A full refund less administration fee of MYR250.00 will be given for cancellation received not later than 10 working days
before the course. No refund will be made after this period. However, substitute participants are welcomed at no extra
charge provided written notice of at least 5 working days before the event is given to the Organizer.](https://image.slidesharecdn.com/understandingmaterialspropertiesmarch2013-121226072900-phpapp01/85/Understanding-of-Material-Property-Theory-Principle-and-Application-March-2013-4-320.jpg)
Understanding of Material Property : Theory, Principle and Application March 2013
- 1. PUSAT PENGAJIAN KEJURUTERAAN BAHAN & SUMBER MINERAL SCHOOL OF MATERIALS & MINERAL RESOURCES ENGINEERING Dates : 7 & 8 March 2013 (Thursday & Friday) Time : 9:00 a.m. – 5:00 p.m. Venue : Kompleks ЄUREKA, Universiti Sains Malaysia, Penang. WHO SHOULD ATTEND? Technical and non-technical personnel (technicians, engineers, managers, and decision makers) who are working in semiconductor, electrical and electronic industries as well as industries involve in design, research and development of electronic materials. REGISTRATION FEE in collaboration with: (Covers course material, refreshment including lunch and Certificate of Attendance) Normal : MYR 2,250.00 per participant (wholly-owned by Universiti Sains Malaysia) Group : MYR 2,025.00 per participant (minimum 3 participants from the same organisation/company) HRDF Claimable* *Subject to HRDF Approval
- 2. INTRODUCTION COURSE CO-ORDINATOR Engineering appliances and gadgets are ASSOC. PROF. DR. IR. CHEONG KUAN YEW dominating the life of human being. Kuan Yew Cheong was born in Ipoh, Perak Therefore, it is a need to understand the (1972) and received the B. Eng (1st Hons.) in Materials Engineering from Universiti characteristics of engineering materials being Sains Malaysia (USM), Malaysia in 1997. used to produce these products. The After graduation, he worked for two years as materials that are being selected must fulfil a project engineer and quality assurance some of the basic requirements. To design, engineer in a project management company and a semiconductor-device manufacturing engineered, improve, and develop any of factory in Malaysia. these products, it is essential to understand End of 1999, he decided to pursue his postgraduate study (M.Sc.) the properties of materials. In this “easy-to- after being awarded a Fellowship under the Academic Staff Training follow” and “easy-to-understand” training Scheme from USM. After completion his M.Sc. in Materials course, engineering materials properties will Engineering (Thin Film Technology) in 2001, he continued his Ph.D. be elaborate in detail. in the School of Microelectronic Engineering, Griffith University, Australia and the degree was awarded in 2004. This study was fully sponsored by Australian Research Council, USM, and Griffith University Postgraduate Research Scholarship. In 2005, he was awarded a Certificate of Teaching and Learning from USM. COURSE OBJECTIVES Now he is serving as an Associate Professor at the School of Upon completion of this training course, Materials & Mineral Resources Engineering, USM. He is teaching under- and post-graduate courses related to fabrication and participants should be able: characterization of engineering & electronic materials and devices 1. To explain concepts related to electrical, for more than 8 years. Dr. Cheong’s main research area is on thermal, optical, magnetic, dielectric, semiconductor device fabrication, electronic packaging, and characterization. The outcomes of his research have been published superconductivity properties. in more than 100 high-impact-factor journals and 3 book chapters. 2. To correlate theory and principle of solid Due to his expertise in wide-bandgap semiconductor-based device state materials with their engineering fabrication technology, for the past six years, he has been invited applications. three times as a Visiting Scientist to Korea Electrotechnology Research Institute (KERI), Korea. He has also being invited as an 3. To suggest engineering materials for Invited Speaker and Keynote Speaker in International Conference certain engineering applications. on Electronic Materials 2010 (ICEM 2010) - International Union of Materials Research Societies (IUMRS), Korea, CIE & IEM International Seminar on Electrical, Electronic and Energy Saving 2010, Taiwan, and Infineon Technologies (Kulim) Sdn Bhd (IFKM) ENQUIRIES Technical Symposium 2010, Malaysia, Surface Engineering 2011 at Bangkok, Thailand, and Collaborative Conference on Crystal Growth on Dec 2012 at Florida USA. Dr Cheong has served as a reviewer Technical Details: for numerous referred journals and theses examiner. He has reviewed more than 350 manuscripts and now serving as an Advisory Editorial Board Member of Materials Science in Assoc. Prof. Dr. Ir. Cheong Kuan Yew Semiconductor Processing published by Elsevier Science B.V and School of Materials & Mineral Resources Associate Editor of Physics Express published by Simplex Engineering, Universiti Sains Malaysia. Academic. He is also a Professional Engineers in Material 04-653 3888 EXT 5259 Engineering discipline under Board of Engineers, Malaysia. cheong@eng.usm.my Outside university, he is very active in professional and community activities. He is a member of Materials Research Society (USA). He was the honorary treasurer for Electron Microscopy Society, Malaysia for year 2005/2006. Since 2005, he has been elected as Registration and others: one of the Ex-comms of the Institute of Electrical, Electronic Engineers (IEEE) – Component, Package, and Manufacturing Khairol Anuar Hazir Mohammed Technology (CPMT) Society and Electron Device Society (EDS), USAINS Holding Sdn Bhd Malaysia Chapter. In addition, he was the Chairman of the electronic engineering technical division (eETD) under The Institution of (D) 04-653 4372 / (M) 012-286 9048 Engineers Malaysia (IEM) from 2009 to 2012 and now is the Advisor (F) 04-657 2210 of the technical division. He has been appointed as a Council khairol@usainsgroup.com / Member of IEM and a Standing Committee on Qualification/Admission and Examination/Training. khairol_usains@yahoo.com For the past years, he has involved in organizing a number of local and international conferences and being invited to chair a few technical sessions in those conferences. Dr Cheong, who is a METHODOLOGY certified PSMB Trainer, has been delivering technical training courses for local and multinational electronics industries for the past 5 years and more than 400 engineers and researchers have 1. Face-to-face lecture – 75%, benefited from those courses. 2. Pair-share discussion – 10%, 3. Group activities – 5%, 4. Open discussion – 10%
- 3. UNDERSTANDING OF MATERIAL PROPERTY COURSE OUTLINE DAY 1 • Introduction to Engineering Materials and Electronic Materials • Fundamental of Solid State • Electrical Property and its Applications • Thermal Property and its Applications • Dielectric Property and its Applications • Magnetic Property and its Applications DAY 2 • Optical Property and its Applications • Superconductivity and its Applications • Ferroelectricity and its Applications • Piezoelectricity and its Applications • Pyroelectricity and its Applications Disclaimer The Organizer reserves the right to reschedule or cancel any part of its published programme or venue due to unforeseen circumstances and will not accept liability for costs incurred by participants or their organizations for the cancellation of travel arrangements and/or accommodation reservations as a result of the course being cancelled or postponed. Advance notice will be given if there is such changes or cancellation. Previous Participants: Previous Participants: Industry University ► Motorola Technology Sdn. Bhd. ► Universiti Teknologi Mara (UiTM), Penang Campus ► Avago Technologies (Malaysia) Sdn. Bhd. ► Universiti Pertahanan Nasional Malaysia (UPNM) ► Philips Lumileds Lighting Company Sdn. Bhd. ► Universiti Sains Malaysia (USM) ► KOBE Precision Technology Sdn. Bhd. ► Western Digital Media (Malaysia) Sdn. Bhd. ► Oryx Advanced Materials Sdn. Bhd. ► B. Braun Medical Industries Sdn. Bhd.
- 4. REGISTRATION FORM UNDERSTANDING OF MATERIAL PROPERTY : THEORY, PRINCIPLE AND APPLICATION – MARCH 2013 Send registration form to : Att: Khairol Anuar, USAINS Holding Sdn. Bhd., Ground Floor, Kompleks EUREKA, Universiti Sains Malaysia, 11800 USM, PENANG. Fax : +604-657 2210 Email : khairol@usainsgroup.com / khairol_usains@yahoo.com / usains.holding@hotmail.com NO. PARTICIPANT NAME POSITION & EMAIL 1. 2. 3. 4. 5. Company: Address: Postcode: Contact Person: Mobile Phone: Telephone No.: Fax No.: E-mail: Mode of Payment Number Bank No. of Participants: I enclose Crossed Cheque Bank Draft Group Discount: Money Order LO/PO Total Sum (MYR) Cheque / Bank Draft / Money Order / LO / PO must be made payable to ‘USAINS HOLDING SDN. BHD.’. 1. Bank Transfer [Please fax your Bank-in Slip (Print your name & details on the slip)]. Payee Name: USAINS Holding Sdn. Bhd. Details: UNDERSTANDING OF MATERIAL PROPERTY – MARCH 2013 Name of Bank: CIMB Bank Berhad (USM Branch), Universiti Sains Malaysia, 11800 USM Penang. Account Number: 0709-0006708-05-7 2. A Local Order (LO) or Purchase Order (PO) must be presented before the event. The Organizer reserves the right to refrain a registered participant from taking part in the event if no proof of payment can be presented. This only applies to registered participants who have NOT paid the registration fee PRIOR to the event date. 3. Cancellation / Substitution A full refund less administration fee of MYR250.00 will be given for cancellation received not later than 10 working days before the course. No refund will be made after this period. However, substitute participants are welcomed at no extra charge provided written notice of at least 5 working days before the event is given to the Organizer.