Uv flame detector
1 like198 views
The UV/IR Flame Detector uses digital multi-processing technology to combine UV and IR sensing to detect fires from hydrocarbon fuels up to 98 feet away. It features a solid 100 degree field of vision and provides standard fire and fault relay outputs as well as 4-20mA current output and RS485 communication. The compact detector is easy to install and suitable for a wide range of industrial and commercial applications involving fire hazards.
Uv flame detector
- 1. Administrative & Sales Office: 25/N, Laxmi Industrial Estate, New Link Road, Andheri (W), Mumbai - 400 053, India. Tel: +91 22 4295 2180 / 81. Webstie: | Email:www.hnlsystems.com sales@hnlsystems.com UV/IR FLAME DETECTOR A S Odvanced ensor & ptics UV/IR Flame Detector D ES C R IP TIO N DESCRIPTION The UV/IR Flame Detector is the new flame detector using digital multi-processing technology. The detector combines the technologiesused to provide immunity to extraneous source. The UV/IR flame detector senses radiation energy in the narrow wave-band of both the ultraviolet and the infrared portions of the electromagnetic spectrum. The US sensor incorporates a special algorithm that prevents false alarm caused by solar radiation. TheIR sensor is sensitive to the radiation of 4.3㎛. UV/IR flame detector has a solid cone of vision for n-Heptane of 98 feet. The detector features standard fire and fault relay, 4 to 20mA current output, RS485 communication. The detector has applications in a wide range of industrial and commercial facilities,where the threat of accidental fire involves hydrocarbon fuels, such as gasoline, kerosene, diesel fuel, aviation jet fuels like JP-4, JP-5, JP-8, hydraulic fluids, paints and solvents, hydrocarbon gases like ethylene and polyethylene,naturalgas(LNG),towngas, liquefied petroleum gas (LPG), methane, ethane, propane, etc. Sensing Path Test (SPT) is also provided. The compact design (1/4 of the conventional detector) makes the new sensor very easy to be installed on the all types of facilities and machines where impossible before.
- 2. Administrative & Sales Office: 25/N, Laxmi Industrial Estate, New Link Road, Andheri (W), Mumbai - 400 053, India. Tel: +91 22 4295 2180 / 81. Webstie: | Email:www.hnlsystems.com sales@hnlsystems.com 2 TECHNICAL DATA SPECIFICATION Spectral Response Detection Range Field of View Response Characteristics Temperature RangeOperating Storage Humidity Range Ultraviolet and Infrared 30m for n-Heptane fire 100° solid cone of vision Typical 3 sec 40℃ to +75℃. 50℃ to +90℃. 0 to 95% relative humidity The above Parameters and Ranges are only indicative. HNL will build up and supply the analyzer with Parameters, range and features to any Practical Configuration. Note : Specifications and Features will vary with application. The above are established and validated during design, but are not to be construed as test criteria for every product. Due to hnl’s commitment to research, design and product improvement, specifications are subject to change without notice. Operating Voltage Power Consumption Writing Electromagnetic Compatibility 17 to 32 vdc. 2.3W minimum , 5.8W Maximum at 30 VDC 16 AWG(1.22 mm 2) to 26 AWG(0.15 mm2) shielded cable recommended. EMI protected RelaysFire Alarm Fault Alarm Form A (NO contacts) - normally de-energized - latching/non-latching. - Contacts rated 1A at 30 vdc. From A or B Selectable - Contacts rated 1A at 30 vdc 4-20mA RS-485 a maximum loop resistance of 500 ohms Fault: 0 +0.5mA Normal : 4mA ±5% Alarm: 20mA ±5% Proprietary communication protocol link Dimensions Enclosure Material Shipping Weight Conduit Entry Size 64 x 64 x 75 mm Aluminum 0.53 kg 1/2 inch PF. Performance Flame Proof Water Tight KOFEIC Exd IIC ,T6 KGS, IP66 Fire Simulator Bracket TL205 BK-1