WebHost Manager 1.01 User Guide

WebHost Manager 1.01
User Guide

DOCUMENTATION VERSION: 1.01

Table of contents

1 What is WebHost Manager? 10

2 How do I use WebHost Manager? 11
2.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.1.1 Logging on for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.1.2 Logging on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.1.3 News . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.2 Server Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.2.1 Editing your server setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.2.2 Tweaking settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.2.3 Tweaking FTP settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.2.4 Changing update preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.2.5 Changing your hostname . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.2.6 Modifying the resolver configuration file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.2.7 Setting the time on your server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.2.8 Reseller Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Removing reseller privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Editing reseller privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Viewing reseller statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Suspending and unsuspending a reseller’s accounts . . . . . . . . . . . . . . . . . . . . . . . 22
Terminating a reseller’s account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Managing a reseller’s IP delegation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Managing a reseller’s shared IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Changing ownership of an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.2.9 Assigning an IP for a new nameserver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.2.10 Enabling quotas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.2.11 Enabling nameservers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.2.12 Setting the MySQL root password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.2.13 Enabling or disable traceroute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.2.14 Changing your server’s root password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.2.15 Forwarding system mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

1

TABLE OF CONTENTS TABLE OF CONTENTS

2.2.16 Service Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2.2.17 Enabling or disabling SuExec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2.2.18 Wheel group (su) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Removing a user from the Wheel group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2.2.19 Enabling or disabling shell fork bomb protection . . . . . . . . . . . . . . . . . . . . . . . . 29
2.2.20 Remote access keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2.3 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.3.1 Using the Interactive Knowledgebase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.3.2 Submitting a support request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.4 Languages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2.4.1 Editing a language file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2.4.2 Cloning a language file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2.4.3 Uploading a language file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.4.4 Downloading a language file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.4.5 Modifying languages for other programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.5 Backups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.5.1 Configuring backups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.5.2 Restoring a backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
2.5.3 Restoring multiple backups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2.5.4 Rolling back files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2.6 System Reboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
2.7 Server Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
2.8 Account Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2.8.1 Listing accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2.8.2 Creating a new account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2.8.3 Skeleton directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
2.8.4 Terminating an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2.8.5 Modifying an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2.8.6 Upgrading or downgrading an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
2.8.7 Rearranging an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
2.8.8 Viewing bandwidth usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.8.9 Limiting bandwidth usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.8.10 Suspending or unsuspending an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
2.8.11 Listing suspended accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
2.8.12 Modifying the Suspended Account page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
2.8.13 Modifying quotas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
2.8.14 Modifying an account password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
2.8.15 Emailing all users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
2.8.16 Displaying all accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
2.8.17 Changing account ownership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

2


2.8.18 Enabling or disabling demo mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
2.8.19 Showing reseller accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
2.8.20 Downloading a raw Apache log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
2.8.21 Unsuspending all accounts that exceed bandwidth . . . . . . . . . . . . . . . . . . . . . . . 51
2.8.22 Fixing insecure CGI permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
2.8.23 Changing a site’s IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
2.8.24 Enabling or disabling shell access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
2.8.25 Listing subdomains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
2.9 Transfers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
2.9.1 Transferring one account from a WebHost Manager server with a password . . . . . . . . . 54
2.9.2 Transferring multiple account from another server . . . . . . . . . . . . . . . . . . . . . . . 55
2.9.3 Transferring multiple account from a Alab*nza server . . . . . . . . . . . . . . . . . . . . . 55
2.10 Themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
2.10.1 Changing the WebHost Manager theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
2.10.2 Adding a CPanel theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
2.10.3 Adding a WebHost Manager theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
2.10.4 Setting the default WebHost Manager theme . . . . . . . . . . . . . . . . . . . . . . . . . . 57
2.10.5 Listing installed themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
2.10.6 Installing a new theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2.10.7 Deleting a CPanel theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
2.10.8 Cloning a CPanel theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
2.10.9 Downloading a themeball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
2.10.10 Creating a new theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
2.11 Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
2.11.1 Deleting a package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
2.11.2 Editing a package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
2.12 DNS Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
2.12.1 Parking or pointing a domain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Unparking a domain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
2.12.2 Listing parked domains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
2.12.3 Adding an A entry for your hostname . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
2.12.4 Adding a DNS zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Editing a DNS zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Deleting a DNS zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
2.12.5 Editing an MX entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
2.12.6 Performing a DNS cleanup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
2.12.7 Establishing a trust relationship . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
2.12.8 Synchronizing DNS records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
2.12.9 Domain forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
2.13 FrontPage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

3


2.13.1 Installing FrontPage mail extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
2.14 MySQL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
2.14.1 Resetting the MySQL root password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
2.14.2 Adding a MySQL access host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
2.14.3 Setting up a remote MySQL server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
2.14.4 Repairing a database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
2.14.5 Changing passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
2.14.6 Showing MySQL processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
2.15 IP Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
2.15.1 Showing or deleting current IP addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
2.15.2 Adding a new IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
2.15.3 Rebuilding the IP address pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
2.15.4 Reserved IP addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
2.15.5 Showing IP address usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
2.16 Disk Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
2.16.1 Optimizing an EIDE hard drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
2.17 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
2.17.1 Installing an RPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
2.17.2 Rebuilding the RPM database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
2.17.3 Installing a Perl module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
2.17.4 Updating server or system software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
2.18 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
2.18.1 Running a quick security scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
2.18.2 Modifying Apache memory usage limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
2.18.3 Scanning for Trojan Horses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
2.19 Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
2.19.1 Using the Mail Troubleshooter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
2.19.2 Managing the mail queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
2.19.3 Viewing email statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
2.20 System Health . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
2.20.1 Killing background processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
2.21 CPanel 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
2.21.1 Resetting a Shopping Cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
2.21.2 Modifying CPanel / WHM news . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
2.21.3 Upgrading to the latest version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
2.21.4 Resetting a Mailman password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
2.21.5 Enabling or disabling Outlook Express autoconﬁguration . . . . . . . . . . . . . . . . . . . 88
2.21.6 Adding on scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
2.21.7 Synchronizing FTP passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
2.22 SSL/TLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

4


2.22.1 Changing a certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
2.22.2 Using the SSL Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
2.22.3 Purchasing and installing an SSL certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
2.22.4 Listing SSL hosts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
2.22.5 Deleting a SSL hosts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
2.22.6 Generating an SSL certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
2.22.7 Installing an SSL certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
2.23 Restart Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
2.24 Scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

3 FAQ 102
3.1 Using the Cpanel::Accounting Perl module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
3.2 Using the Cpanel Accounting php module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

5

List of figures

1.1 WebHost Manager logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.1 Editing your server setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.2 Logging on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.3 Editing your server setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.4 Tweaking settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.5 Tweaking FTP settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2.6 Changing update preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.7 Changing your hostname . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.8 Modifying the resolver configuration file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.9 Setting the time on your server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.10 Adding reseller privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.11 Removing reseller privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2.12 Editing reseller privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.13 Viewing reseller statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.14 Suspending and unsuspending a reseller’s accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2.15 Terminating a reseller’s account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.16 Restricting a reseller’s IP delegation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.17 Managing a reseller’s shared IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.18 Changing ownership of an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.19 Setting the MySQL root password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.20 Changing your server’s root password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.21 Forwarding system mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2.22 Using the Service Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2.23 Enabling SuExec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2.24 Adding a user to the Wheel group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2.25 Removing a user from the Wheel group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2.26 Disabling shell fork bomb protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2.27 Generating a remote access key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2.28 Using the Interactive Knowledgebase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.29 Submitting a support request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
2.30 Editing a language file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2.31 Cloning a language file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

6

LIST OF FIGURES LIST OF FIGURES

2.32 Uploading a language file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.33 Downloading a language file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.34 Modifying languages for other programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2.35 Configuring backups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.36 Restoring a backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
2.37 Rolling back a file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
2.38 Viewing server status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
2.39 Listing your accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
2.40 Creating a new account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
2.41 Displaying the skeleton directory path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2.42 Terminating an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
2.43 Modifying an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
2.44 Upgrading an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
2.45 Rearranging an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.46 Viewing bandwidth usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.47 Limiting the bandwidth on an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.48 Suspending an account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
2.49 Listing suspended accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
2.50 Modifying the Suspended Account page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
2.51 Altering an account’s disk space quota . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
2.52 Changing an account’s password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
2.53 mailing all users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
2.54 Displaying all accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
2.55 Changing account ownership . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
2.56 Enabling demo mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
2.57 Showing reseller accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
2.58 Downloading a raw Apache log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
2.59 Unsuspending all accounts that exceed bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
2.60 Fixing insecure CGI permissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
2.61 Disabling shell access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
2.62 Listing all subdomains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
2.63 Transferring one account from another server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
2.64 Transferring one account from a WebHost Manager server with a password . . . . . . . . . . . . . 55
2.65 Changing the WebHost Manager theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
2.66 Adding a CPanel theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
2.67 Adding a WebHost Manager theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
2.68 Setting the default WebHost Manager theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
2.69 Listing installed themes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2.70 Installing a new theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2.71 Deleting a CPanel theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

7


2.72 Cloning a CPanel theme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
2.73 Downloading a themeball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
2.74 Adding a package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
2.75 Deleting a package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
2.76 Editing a package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
2.77 Parking a domain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
2.78 Unparking a domain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
2.79 Listing parked domains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
2.80 Adding an A entry for your hostname . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
2.81 Adding a DNS zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
2.82 Editing a DNS zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
2.83 Deleting a DNS zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
2.84 Editing an MX entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
2.85 Establishing a trust relationship with a primary nameserver . . . . . . . . . . . . . . . . . . . . . . 67
2.86 Synchronizing DNS records with the primary nameserver . . . . . . . . . . . . . . . . . . . . . . . 68
2.87 Setting up a domain forwarder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
2.88 Installing FrontPage extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
2.89 Installing FrontPage mail extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
2.90 Resetting the MySQL root password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
2.91 Adding a MySQL access host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
2.92 Setting up a remote MySQL server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
2.93 Repairing a database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
2.94 Changing a database password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
2.95 Deleting a current IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
2.96 Adding a new IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
2.97 Rebuilding the IP address pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
2.98 Reserving an IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
2.99 Showing IP address usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
2.100Optimizing an EIDE hard drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
2.101Reinstalling an RPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
2.102Rebuilding the RPM database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
2.103Installing a Perl module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
2.104Modifying the Apache memory usage amount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
2.105Scanning for Trojan Horses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
2.106Using the Mail Troubleshooter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
2.107Deleting all email in the mail queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
2.108Viewing email statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
2.109Viewing current CPU usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
2.110Killing background processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
2.111Resetting a shopping cart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

8


2.112Modifying CPanel news . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
2.113Upgrading to the latest version of CPanel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
2.114Resetting a Mailman password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
2.115Enabling Outlook Express autoconfiguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
2.116Adding on scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
2.117Synchronizing FTP passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
2.118Changing a certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
2.119Using the SSL Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
2.120Purchasing an SSL certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
2.121Generating an SSL certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
2.122Installing an SSL certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

9

CHAPTER 1. WHAT IS WEBHOST MANAGER?

1 What is WebHost Manager?
WebHost Manager is the control center of the CPanel / WebHost Manager package. It is used to set up and
manage accounts, monitor bandwidth and services, and much more – all aspects of web hosting are covered
through WebHost Manager. You can keep track of the accounts on your server, their bandwidth, and disk space
usage, and more with only an Internet connection and the click of a button. Note: This help ﬁle assumes that
you have a good working knowledge of Linux commands and basic computer and networking procedures. Refer
to the following sites if you need more information about the terms or functions used in this help ﬁle:

• linuxnewbie.org
• Linux Documentation Project

Refer to page 11 for more information on how to WebHost Manager’s features.

Figure 1.1: WebHost Manager logo

10

CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2 How do I use WebHost Manager?
WebHost Manager is an extensive web application that provides a complete range of web hosting functionality.
The following areas of functionality are provided:

• Server Setup – The Server Setup area enables you to control the main setup of your server, including
nameservers, changing passwords, and enabling and disabling services and resellers.
• Support – The Support area contains the Interactive Knowledgebase, a database of common problems and
solutions. All of the fixes can be activated from the Knowledgebase area itself.
• Languages – The Languages area enables you to create, alter, and upload/download language configuration
files for CPanel.
• Backups – The Backups area deals with configuring and restoring backup files and versions of key files
(such as httpd.conf).
• System Reboot – The System Reboot area enables you to reboot your server in two separate ways.
• Server Status – The Server Status area displays a wide variety of server information, from your server’s
Apache status to CPU usage.
• Account Functions – The Account Functions area deals with all of the functions necessary to create
and manage web hosting accounts, from creating and editing accounts to mailing all user and listing all
subdomains.
• Transfers – The Transfers area enables you to transfer web accounts from other server to your own server.
• Themes – The Themes area deals with all aspects of the CPanel and WebHost Manager user interface,
from branding current themes to creating your own.
• Packages – The Packages area enables you to create your own custom web hosting packages.
• DNS Functions – The DNS Functions area manages all aspects of DNS, from parking a domain to adding
a DNS zone.
• FrontPage – The FrontPage area allows you to install and uninstall FrontPage extensions for your Microsoft
customers.
• MySQL – The MySQL area enables you to repair a database, change passwords, and show what MySQL
processes are in use.
• IP Functions – The IP Functions area enables you to add and manage IP addresses, including adding and
reserving addresses and displaying IP usage.
• Disk Drives – The Disk Drives area deals with formatting and mounting new hard drives and optimizing
hard drives for superior performance.
• Software – The Software area deals with installing and updating server and system software on your server.
• Security – The Security area deals with security issues, from scanning for security beaches and Trojan
Horses to modifying Apache’s memory usage limit.
• Email – The Email area allows you troubleshoot problematic email addresses and manage your mail queue.

• System Health – The System Health area displays a variety of information that indicates the health of
your system, including current disk and CPU usage.
• CPanel 5 – The CPanel 5 area contains a variety of miscellaneous features that help you to manage CPanel
accounts.

11

2.1. INSTALLATION CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

• SSL/TLS – The SSL/TLS area enables you to manage all areas of SSL certificates, from generating new
certificates to installing and changing them.
• Restart Services – The Restart Services area allows you to restart various system services.

2.1 Installation
WebHost Manager uses comprehensive installers that take most of the effort out of installing the complex WebHost
Manager software package. You will need the following to install WebHost Manager:

• RedHat Linux 6.2 (SERVER INSTALL) or newer (RedHat 7.0 is not supported due to compiler bugs) OR
• Mandrake Linux 7.2 (SERVER INSTALL) or newer
• A CPanel license (CPanel/WebHost Manager will not run without a license file). You can obtain a li-
cense from an authorized cpanel.net distributor or a test license by mailing beta@cpanel.net. For a list of
distributors, please see http://www.cpanel.net/

We recommend the following partition scheme:

• /boot 35 Meg
• /usr 2048+ Meg (If you have a 60 gig drive try 4096 for /usr, 5000 if you have an 80 gig drive, etc.)
• /var 1500+ Meg
• /tmp 1024 Meg
• / 1024 Meg
• /home grow to fill disk
• swap 2x memory size

Minimum CPU/RAM/HD:

• P266
• 256 Meg of ram

• 4 Gig of space

To install WebHost Manager

1. Make sure you are logged in as root.
2. # cd /home
3. # wget http://layer1.cpanel.net/lastest
Note: For FreeBSD, you need to download and untar the latest installer package from
http://www.cpanel.net/ .
4. # sh lastest
5. The installer has now started, and will take between 10 and 70 minutes depending on your machine. If you
are asked any questions just press enter, or q if there is no default. After the install completes, you need to
setup WebHost Manager – refer to page 13 for more information.

12


2.1.1 Logging on for the first time
When you log on to WebHost Manager for the first time you need to set up the basic settings on your server.
After you have completed these initial steps you can log into WebHost Manager normally – refer to page 14 for
more information. Note: You can change your initial server settings at any time – refer to page 15 for more
information.
To log on:

1. Enter the address of your WebHost Manager in your web browser. The address needs to be in the form of
http://www.yourdomain.com:2086/ or https://www.yourdomain.com:2087/.
2. Enter your user name and password in the User Name and Password fields.

3. Click on button.

4. Click on the button in the first page.

5. Read the legal agreement and click on the or button.
6. Enter the primary IP address, BIND version, and IP address of the master cluster server (optional) in the
Primary IP Address, BIND Version, and Master Cluster Server fields.
7. Enter your administrator’s contact details in the Server Contact’s AIM (AOL Instant Messenger), Server
Contact’s E-Mail Address, and Server Contact’s Pager Address fields.
Note: Entering ICQ contact details in the available field does not currently work due to changes in the
ICQ protocol.
8. Enter the name of the default CPanel theme that you want to use in the Default CPanel4 Theme field.
The two standard themes that are automatically installed with CPanel are default and iconic. Refer to
page 56 for more information about themes.
9. Enter the default home directory where new users accounts will be created and the prefix that matches
other user partitions in the Default Home Directory and Home Directory Prefix fields.
10. Enter the current hostname of your server in the Hostname field.
11. Enter the name of the type of Apache logs that you want to receive. Two options are available:

• combined – All information is logged, including referrers, user agents, and requested files.
• access – Only information about requested files is logged.

12. Enter up to four nameserver names in the Primary Nameserver, Secondary Nameserver, Third
Nameserver, or Fourth Nameserver fields. The Primary Nameserver and Secondary Nameserver
fields are mandatory.
13. Choose whether you want users to have CGI access in the CGI Script Alias field. y = Yes, n = no.
14. Enter the IP address of the master nameserver in the Master Nameserver field, if required.
Warning: This will turn your server into a slave server if this option is enabled. It is advisable to establish
a key rust relationship with the master nameserver after enabling this option – refer to page 67 for more
information.

13


15. Click on the button.

Figure 2.1: Editing your server setup



2.1.2 Logging on
You need to log on in order to use WebHost Manager to manage your web site.
To log on:

1. Enter the address of your WebHost Manager in your web browser. The address needs to be in the form of
http://www.yourdomain.com:2086/ or https://www.yourdomain.com:2087/.
2. Enter your user name and password in the User Name and Password ﬁelds.

3. Click on button. You will now be logged on to WebHost Manager.

Figure 2.2: Logging on

2.1.3 News
WebHost Manager includes a news page that lists the latest feature enhancements, releases, and bug ﬁxes. It is
a good idea to check the News page regularly for new information.
To read the latest CPanel and WebHost Manager news:

1. Click on the cPanel/WHM News at the top of the navigation menu.

14

2.2. SERVER SETUP CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.2 Server Setup
The Server Setup area enables you to control the main setup of your server, including nameservers, changing
passwords, and enabling and disabling services and resellers. Warning: Do not change your server settings
unless you are absolutely sure you know what you are doing. Altering these settings incorrectly can result in
CPanel and WebHost Manager functioning incorrectly.

2.2.1 Editing your server setup
The Edit Setup area enables you to edit your server configuration settings that you created during the installation
and initial logon process (refer to page 13 if you have not logged on yet). This includes editing your master IP
address, BIND version, contact details if problems occur, and related information. Warning: Do not change
your server settings unless you are absolutely sure you know what you are doing. Altering these settings incorrectly
can result in CPanel and WebHost Manager functioning incorrectly.
To edit your server setup:

1. Click on the Edit Setup link in the Server Setup menu.
2. Enter the hosting IP address, AIM (AOL Instant Messenger) username and password, BIND version, and
IP address of the master cluster server in the Main Shared Virtual Host IP, AIM Password, AIM
Username, BIND Version, and Master Cluster Server fields.
3. Enter your administrator’s contact details in the Server Contact AIM, Server Contact E-Mail Ad-
dress, Server Contact Pager Address, and Server Contact ICQ UIN fields.
4. Enter the name of the default CPanel theme that you want to use in the Default CPanel5 Theme field.
Refer to page 56 for more information about themes.
5. Enter the name of the ethernet device that you are using in the Alternate Main Ethernet Device field,
if required. You only need to do this if you are using an ethernet device that is not the first ethernet device
on the machine.
6. Enter the default home directory where new users accounts will be created and the prefix that matches
other user partitions in the Default Home Directory and Home Directory Prefix fields.
7. Enter the current hostname of your server in the Hostname field.
8. Enter the ICQ password and UIN for whomever deals with system alerts in the ICQ Password and ICQ
UIN fields.

9. Enter the name of the type of Apache logs that you want to receive. Two options are available:

• combined – All information is logged, including referrers, user agents, and requested files.
• access – Only information about requested files is logged.

10. Enter the lowest UID number to start from when creating accounts in the Minimum Uid field, if required.
11. Enter up to three nameserver names in the Primary Nameserver, Secondary Nameserver, and Third
Nameserver fields. The Primary Nameserver and Secondary Nameserver fields are mandatory.
12. Choose whether you want users to have CGI access in the CGI Script Alias field. y = Yes, n = no.

13. Enter the IP address of the master nameserver in the Master Nameserver field, if required.
Warning: This will turn your server into a slave server if this option is enabled. It is advisable to establish
a key rust relationship with the master nameserver after enabling this option – refer to page 67 for more
information.

15



Figure 2.3: Editing your server setup

2.2.2 Tweaking settings
You can change a large number of settings on your server, including enabling or disabling mail scripts and
SpamAssassin. These changes effect all users of the machine, including yourself, resellers, and reseller’s customers.
To tweak settings:

1. Click on the Tweak Settings link in the Server Setup menu.
2. A large number of functions are available. Click on the tick box or radio button next to the following items
to enable or disable the function.

• Allow Creation of Parked/Addon Domains that resolve to other servers – Allows customers
to create parked and addon domain names whose DNS settings resolve to remote servers.
• Allow Creation of Parked/Addon Domains that are not registered – Allows customers to
create parked and addon domain names that are not currently registered. No validation of the domain
name is performed.
• Allow users to Park/Addon Domains on top of domains owned by other users – Allows
customers to park and addon domain names onto any domain name. There is no restriction on what
domain names can be used.
• The load average above the number of cpus at which logs file processing should be sus-
pended – Suspends log file processing when the server load average, above the number of CPUs on
the server, is greater than the number entered in the adjacent field.
• Number of days between processing log files and bandwidth usage – Enter the number of days
between processing log files and bandwidth usage in the adjacent field. Decimal values are allowed.
• The load average that will cause the server status to appear red – Enter the load average
above which will cause the server status image to appear red to customers (refer to page 40 for more
information).
• Keep log files at the end of the month – Maintains old log files after the end of each month. If
not ticked, log files are deleted after each month.
• Analog Stats – Enables the Analog web statistics script if ticked.
• Webalizer Stats – Enables the Webalizer web statistics script if ticked.
• Awstats Stats – Enables the Awstats web statistics script if ticked.
• Horde Webmail – Enables the Horde webmail script if ticked.

16


• Neomail Stats – Enables the Neomail webmail script if ticked.
• Spamassassin – Enables the Spamassassin script if ticked.
• Delete each domain’s access logs after stats run – Deletes access logs for each domain name
after web statistics are calculated.
• Interchange Version to use – Indicates which version of the Interchange shopping cart to use, or
disables the script.

Note: New web statistics packages take 24-48 hours to generate enough statistics to display for users.


Figure 2.4: Tweaking settings

2.2.3 Tweaking FTP settings
You can alter FTP settings for your machine. You can change between two diﬀerent FTP servers, Proftpd and
Pure-ftpd, as required. The advantages and disadvantages of both servers are displayed in the displayed screen
capture. You can also enable or disable anonymous FTP for the entire machine, if required.
To alter your FTP settings:

1. Click on the Tweak Ftp Settings link in the Server Setup menu.


3. If you need to enable or disable anonymous FTP, click on the button.

Figure 2.5: Tweaking FTP settings

17


2.2.4 Changing update preferences
You can select which updates you would like to receive from DarkORB automatically, if any. There are three
package types available:

• CPanel Updates – Updates to CPanel.
• DarkOrb Package Updates – Updates to DarkOrb packages.
• Security Package Updates – Updates to security packages.

Each package update has the following options available:

• Automatic – Package is updated automatically as releases become available.
• Manual Updates Only – Package is updated manually. All updates are available for manual download
from the cpanel.net site.
• Never Update – Disables the automatic update function.

CPanel and WebHost Manager package updates contains one of the following build types:

• EDGE – A development release that has undergone the least amount of testing.

• RELEASE – A formal release that has undergone extensive testing.
• STABLE – A formal release that has shown no problems during use by DarkOrb customers.

To change update preferences:

1. Click on the Change Update Preferences link in the Server Setup menu.
2. Click on the required radio buttons for the CPanel, DarkORB, and Security packages.


Figure 2.6: Changing update preferences

2.2.5 Changing your hostname
The Change Hostname option enables you to change the hostname of your server. It is important to choose a
hostname that will not be used for any account, and the hostname must be socially acceptable, as it will appear
in all mail headers. The hostname must be a FQDN (Fully Qualiﬁed Domain Name). All valid hostnames must
have at least 2 dots in them, for example entropy.yourdomain.com. WebHost Manager automatically generates
10 random hostnames based on your current hostname as samples which you can use.
To change your hostname:

18


1. Click on the Change Hostname link in the Server Setup menu.
2. Enter your changed hostname in the New Hostname field.


Figure 2.7: Changing your hostname

2.2.6 Modifying the resolver configuration file
The resolver configuration file (resolv.conf) is a configuration file for name server routines that normally you do
not need to alter. Note: Do not modify the IP values unless you know what you are doing. If they are not
altered properly, your server will not function properly.
To modify the resolver configuration file:

1. Click on the Modify Resolver Configuration link in the Server Setup menu.

3. Read the information unless you are sure you know what you are doing. Enter your primary resolver’s IP
address in the Primary Resolver field.
4. Enter additional resolvers’ IP addresses in the Secondary Resolver and Tertiary Resolver fields, if
required.

Figure 2.8: Modifying the resolver configuration file


2.2.7 Setting the time on your server
The Server Time area enables you to set the time zone for your server clock. You can also synchronize your server
time with the displayed time in your browser.
To set the time on your server:

1. Click on the Server Time link in the Server Setup menu.
2. Click on the required time zone in the drop-down list.

4. If you need to synchronize your server time with the displayed time in your browser, click on the

button.

19


Figure 2.9: Setting the time on your server

2.2.8 Reseller Center
The Reseller Center enables you to control all aspects of reseller privileges. You can add or remove reseller
privileges, and edit those privileges. Adding reseller privileges gives the user account access to WebHost Manager
with a restricted subset of functionality, which you can then add to as required.
To add reseller privileges:

1. Click on the Reseller Center link in the Server Setup menu.
2. Click on the account to which you want to add reseller privileges from the Add Reseller Privileges
drop-down list, and click on the button.
You now need to edit the new reseller’s privileges, as the default setting is very restricted. Refer to page 21
for more information.

Figure 2.10: Adding reseller privileges

Removing reseller privileges
You can remove reseller privileges from an account at any time.
To remove reseller privileges:

2. Click on the account from which you want to remove reseller privileges from the Remove Reseller Priv-
ileges drop-down list, and click on the button.

Figure 2.11: Removing reseller privileges

20


Editing reseller privileges
You can edit the functionality that a reseller can access in their version of WebHost Manager at any time. You
can turn on or off almost all functionality, as the settings are highly configurable. Note: There are a number
of reseller settings that can potentially cause problems:

• All Features – This gives the reseller root access on this server.
• Account Modification – This enables the reseller to circumvent account creation limits, and allows shell
access and dedicated IPs.

• Edit DNS Entries – This enables the reseller to access all DNS zones.

To edit reseller privileges:

2. Click on the account whose privileges you want to edit from the Edit Reseller Privileges drop-down list,
and click on the button.
3. You can limit the amount of accounts that a reseller can create in a number of ways. All methods can be
used with each other and the effects are cumulative.

• If you want to limit the accounts that the reseller can create by account type, click on the first tick
box.
• If you want to limit the number of accounts that the reseller can creates, click on the second tick box
and enter the account limit amount in the amount field. You can also limit these by account type –
click on the indented tick box.
• f you want to limit the accounts that the reseller can create by resources used, disk space and/or
bandwidth, click on the third tick box. Enter the resource limits in the Disk Space and Bandwidth
fields.

4. Click on the feature tick boxes that the reseller requires.
5. Enter the primary and secondary nameserver names for the reseller in the Primary Nameserver and
Secondary Nameserver fields. You can enter third and fourth nameservers in the last two nameserver
fields, if required.


Figure 2.12: Editing reseller privileges

21


Viewing reseller statistics
You can view statistics for each reseller, listed by domain name, whether it is suspended or not, disk space used,
and bandwidth used.
To view reseller statistics:


2. Click on the required account from the View Reseller Usage/Stats drop-down list, and click on the
button.
3. View the reseller’s statistics as required. Refer to page 22 if you want to suspend or unsuspend a reseller’s
accounts.

Figure 2.13: Viewing reseller statistics

Suspending and unsuspending a reseller’s accounts
You can suspend all of a reseller’s accounts if the accounts are violating your AUP (Acceptable Usage Policy) or
otherwise causing problems. This should be used as a last resort – always contact the reseller ﬁrst to discuss the
problem, unless the situation is urgent.
To suspend or unsuspend a reseller’s accounts:


button.

3. Click on the or
button, as required.
Note: This will suspend or unsuspend all of the reseller’s accounts, but not the reseller’s own account.
Refer to page 46 for more information.

Figure 2.14: Suspending and unsuspending a reseller’s accounts

22


Terminating a reseller’s account
You can terminate a reseller’s account at any time. Note: This will delete all accounts that the reseller owns
as well, without chance of recovery.
To terminate a reseller’s account:


button.
3. Make sure the Terminate Reseller’s Main Account tick box is ticked and click on the Terminate
button.

Figure 2.15: Terminating a reseller’s account

Managing a reseller’s IP delegation
All accounts, when ﬁrst created, can use any available IP address. You can restrict the IP address(s) for the
account, if required.
To manage a reseller’s IP delegation:

2. Click on the required account from the Manage Reseller Ip Delegation drop-down list, and click on the
button.
3. Click on the Allow [reseller] to use any available ip address radio button or the Restrict ips [reseller]
can use for accounts radio button, as required.
4. If you clicked on the Restrict ips [reseller] can use for accounts radio button, click on the tick box(es)
next to the IP addresses that the reseller can use.

Figure 2.16: Restricting a reseller’s IP delegation


23


Managing a reseller’s shared IP address
All accounts, when ﬁrst created, use the same shared IP address for such things as FTP. You can change the
shared IP address for the account to another number, if required.
To manage a reseller’s shared IP:


2. Click on the required account from the Manage Reseller Main Shared/Ipless Ip drop-down list, and
click on the button.
3. Click on the required IP address from the drop-down list.


Figure 2.17: Managing a reseller’s shared IP address

Changing ownership of an account
You can change the ownership of an account from one reseller to another, or to yourself, as required.
To change ownership of an account:

2. Click on the Change Ownership of an account link.

3. Click on the required domain name and click on the button.

4. Click on the new owner from the drop-down list and click on the button.

Figure 2.18: Changing ownership of an account

2.2.9 Assigning an IP for a new nameserver
You can add the IP address for a new nameserver whenever required.
To assign an IP for a new nameserver:

1. Click on the Manage Nameserver IPs link in the Server Setup menu.
2. Enter the IP for the new nameserver in the Nameserver ﬁeld and click on the Assign button.

24


2.2.10 Enabling quotas
You can enable WebHost Manager to set disk space quotas for the accounts on your server. Note: If you have
compiled a custom kernel on your machine that does not have quota support, enabling quotas may result in an
unbootable system.
To enable quotas:

1. Click on the Initial Quota Setup link in the Server Setup menu.

2. Read the warning information and then click on the button.

2.2.11 Enabling nameservers
This function enables you to set up your own nameservers. Your nameserver information is already listed here If
you chose to add your own nameservers during the installation of WebHost Manager. Note: It is recommended
that you do not enable nameservers unless you are gong to use them. You can turn off a nameserver using Service
Manager – refer to page 27 for more information.
To enable nameservers:

1. Click on the Initial Nameserver Setup link in the Server Setup menu.

2. Read the warning information and then click on the button.

2.2.12 Setting the MySQL root password
You can set, and change, your MySQL root password at any time. It is recommended that you change your root
password often. Warning: Do not make the MySQL and server root passwords the same.
Note: Do not give out your root password to anyone that does not absolutely need it. If you are to give out your
route password to DarkORB, or other staff, please verify their email address before you give them the password.
To set the MySQL root password:

1. Click on the Set MySQL Root Password link in the Server Setup menu.

2. Enter the new MySQL password in the New Password field, and click on the button.

Figure 2.19: Setting the MySQL root password

2.2.13 Enabling or disable traceroute
The Traceroute Setup enables you to enable or disable traceroute on your server. This is most useful in allowing
you to track what path an email takes to isolate where problems are occurring in your mail system.
To enable or disable traceroute:

25


1. Click on the Enable/Disable Traceroute link in the Server Setup menu.

2. Click on the button to enable traceroute or click on the button to disable traceroute.

2.2.14 Changing your server’s root password
You can change your server’s root password at any time, and it is recommended that you change the password
often. Note: Do not give out your root password to anyone that does not absolutely need it. If you are to give
out your route password to DarkORB, or other staff, please verify their email address before you give them the
password.
To change the root password:

1. Click on the Change Root Password link in the Server Setup menu.

2. Enter the new root password in the New Password field, and click on the button.

Figure 2.20: Changing your server’s root password

2.2.15 Forwarding system mail
The Mail Manager area enables you to forward system mail to specific locations, if required. You can set
forwarding rules on three separate system users:

• root
• nobody
• mailman

To forward system mail:

1. Click on the Change where system mail goes link in the Server Setup menu.

2. Enter the forwarding mail address for a system user in the available field, and click on the
button.
3. Repeat the previous step for the other fields as required.

4. Remove the address in a field and click on the button to disable mail forwarding for that user.

26


Figure 2.21: Forwarding system mail

2.2.16 Service Manager
The Service Manager area enables you to start and stop available services on your server. The following services
are available:

• cppop – POP3 server
• entropychat – CPanel’s HTML-based chat server
• exim – SMTP server
• httpd – web server
• interchange – shopping cart server
• melange – Java-based chat server

• mysql – database server
• named – name server (BIND)
• proftpd – FTP server
• spamd – SpamAssassin server
Note: If you choose to disable this, you need to disable the SpamAssassin option from all customers as
well. Refer to page 16 for more information on disabling this setting.
• exim on another port – run another copy of exim on a diﬀerent port number, as some providers block
25, the standard port number

Refer to page 95 if you need to restart any services.
To start or stop a service

1. Click on the Service Manager link in the Server Setup menu.
2. Click on the tick boxes next to the required services to start or stop them.


27


Figure 2.22: Using the Service Manager

2.2.17 Enabling or disabling SuExec
SuExec is an Apache feature that gives users the ability to run CGI and SSI programs using user IDs that are
diﬀerent from the user ID of the calling web server. This eﬀectively means that CGI and SSI programs will not
have access to the root account or have root permissions. Refer to the SuExec support page for more information
about the advantages and risks of SuExec.
To enable or disable SuExec:

1. Click on the Enable/Disable SuExec link in the Server Setup menu.

2. Click on the button to enable SuExec or click on the button to disable SuExec.

Figure 2.23: Enabling SuExec

2.2.18 Wheel group (su)
The Wheel group is a user group that can gain access to root on your server by using the su command (create a
shell with the entered user id). You can add and remove users from that group as required.
To add a user to the Wheel group:

1. Click on the Add/Remove Users from the Wheel Group (allow su) link in the Server Setup menu.

2. Click on the required user in the displayed list and click on the button.

28


Figure 2.24: Adding a user to the Wheel group

Removing a user from the Wheel group
You can remove a user from the Wheel group at any time.
To remove a user from the Wheel group:

1. Click on the Add/Remove Users from the Wheel Group (allow su) link in the Server Setup menu.
2. Click on the button with the name of the user that you want to remove from the Wheel group.

Figure 2.25: Removing a user from the Wheel group

2.2.19 Enabling or disabling shell fork bomb protection
WebHost Manager is installed with shell fork bomb protection against Telnet/SSH users using all of the server
resources and causing a system crash. This protection can be disabled or re-enabled as required.
To enable or disable shell fork bomb protection:

1. Click on the Shell Fork Bomb Protection link in the Server Setup menu.

2. Click on the or the button as required.

Figure 2.26: Disabling shell fork bomb protection

2.2.20 Remote access keys
A remote access key is used for automatic account creation scripts, external billing software, and various other
applications that need to call WebHost Manager to create, remove, or modify accounts. Refer to the external
software provider for detailed instructions as to where and how the key needs to be inserted for their application.
Refer to page 107 for more information.
To view or generate a remote access key:

29


1. Click on the Setup Remote Access Key link in the Server Setup menu.
2. You can copy and paste the current key, if that is what you need. To generate a new key, click on the

button.

Figure 2.27: Generating a remote access key

30

2.3. SUPPORT CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.3 Support
The Support area contains a knowledgebase of problems and script solutions, as well as a support request form
for server owners.

2.3.1 Using the Interactive Knowledgebase
The Interactive Knowledgebase enables you to find solutions to many common problems you may encounter
when running WebHost Manager – simply search for related topics to your keywords, and the Knowledgebase
will present a list of solutions. All you need to do to use a solution is click on the available link.
To use the Interactive Knowledgebase

1. Click on the Interactive Knowledgebase link in the Support menu.
2. Enter a brief keyword description of the problem you are having in the Enter Issue field.
Example: If you have a problem with mailman after installing suexec, enter: suexec mailman
3. Enter the domain that has the problem in the Affected Domain field. This will customize any solutions
you find to that domain.

5. Click on the Click-to-fix! link next to the required solution. If you entered a domain as part of the search
criteria, the solution script will automatically run against that domain. If you did not enter any domain as
part of the search criteria, the solution script will run against your account.

Figure 2.28: Using the Interactive Knowledgebase

2.3.2 Submitting a support request
You can submit a support request to CPanel.net developers. There are alternate forms of help you should peruse
before you submit a support request:

1. Documentation – Please check the online CPanel and WebHost Manager documentation for help.
2. Support Forums – Search through the archives or ask a question at the CPanel.net support forums .

Note: This support request form is designed only for server owners. If you have a question about how to use
WebHost Manager or CPanel, please direct the question to the company from which you obtained your license.
CPanel support will not be able to answer questions about installing third party software (i.e. ImageMagick,
pdflib, etc.).
To submit a support request:

1. Click on the Submit a Support Request link in the Support menu.

31

2.3. SUPPORT CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2. Enter your name, email address, phone number, and IP address of your server in the Your Name, Your
Email Address, IP Address of Server, and Call Back # fields. The IP Address of Server field
should already have the correct IP address entered in the field.
3. Enter a brief, one line description of your problem in the Brief Description of Problem field.
4. Enter the name of the distributor from which you obtained a software license in the Distributor/Partner
NOC Name field.
5. Enter a detailed description of the problem in the Detailed Problem Description field. Add as much
detail as you can about the problem.

6. To the best of your ability, enter each action required to reproduce the problem in the Steps to Reproduce
the Problem field.

7. Click on the

Figure 2.29: Submitting a support request

32

2.4. LANGUAGES CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.4 Languages
The Languages area enables you to create, alter, and upload/download language configuration files for CPanel.
These configuration files accept HTML code and allow you to alter all words in CPanel to conform to the native
language of your customers.

2.4.1 Editing a language file
You can edit the words used in any language file. You can use this to make small changes in the currently
active language file or completely change a cloned language file for a new language (refer to page 33 for more
information). Note: Most third-party themes or skins do not have the ability to change based on language files.
Please contact the creator of your theme for more information.
To edit a language file:

1. Click on the Edit a Language File link in the Languages menu.
2. Click on the language file that you want to edit.
3. Alter the text in any of the available fields. You can use HTML code if required.

Figure 2.30: Editing a language file


2.4.2 Cloning a language file
In order to create a new language file you need to clone or copy one of the existing language files. You can then
download the file for manual editing (refer to page 34 ) or edit the file online (refer to page 33 ).
To clone a language file:

1. Click on the Clone/Create a New Language link in the Languages menu.
2. Click on the language file that you want to clone.
3. Enter the name for the language file in the Please enter a name for the new language field and click

on the button.

Figure 2.31: Cloning a language file

4. You can now download the file for manual editing (refer to page 34 ) or edit the file online (refer to page 33
).

33


2.4.3 Uploading a language file
You can upload a new language file once you have finished altering a downloaded file (refer to page 34 for more
information).
To upload a language file:

1. Click on the Upload a Language File link in the Languages menu.

2. Use the button to select the language file that you want to upload. This can be any plain
text file.


Figure 2.32: Uploading a language file

2.4.4 Downloading a language file
You can download a language file for offline editing. This is most useful when you have copied an existing file
which you are going to change to a new language (refer to page 33 for more information).
To download a language file:

1. Click on the Download a Language File link in the Languages menu.
2. Click on the language file that you want to download.
3. Copy and paste the displayed text to a text file for editing.

Figure 2.33: Downloading a language file

2.4.5 Modifying languages for other programs
Several of the existing scripts used by CPanel have pre-configured languages files already installed. You can
choose which language file you want to use for your customers at any time.
To modify languages for other programs:

1. Click on the Additional Program Language Configuration link in the Languages menu.
2. Click on the required language from the drop-down list for each script.

34


Figure 2.34: Modifying languages for other programs

3. button.

35

2.5. BACKUPS CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.5 Backups
The Backups area deals with configuring and restoring backup files and versions of key files (such as httpd.conf).

2.5.1 Configuring backups
You can specify how often backups occur and where backups are placed – either on the same server or on a
separate backup drive. You can also specify the specific parts of the backup process that are enabled. Note:
The backup interval options work in the following fashion:

• Daily – WebHost Manager performs separate daily, weekly, and monthly backups.
• Weekly – WebHost Manager performs separate weekly and monthly backups.
• Monthly – WebHost Manager performs only monthly backups.

To configure backups:

1. Click on the Configure Backup link in the Backup menu.
2. Click on the radio button next to the following items to enable or disable the specified functionality:
• Backup Status – Turns the automatic backup function on or off. The Restore Only radio button
allows site restoration from old backups to occur, but does not create new backups.
• Backup Interval – Specify the interval used by the backup process.
• Remount/Unmount backup drive – Mounts and unmounts the backup drive when a backup is
created. This requires a separate drive mount to operate.
• Incremental backup – Backup process only copies what has changed since the last backup. This
creates a much smaller backup file, but changes are piecemeal and the backup files are not compressed.
• Backup Accounts – Backup process copies all account information for your customers.
• Backup Config Files and Sql Databases – Includes config files and MySQL databases in the
backup process.
• Backup Destination – Enter the location of backups in the available field. This should be a
dir/nfs/coda mount with at least twice the space of all your /home* partitions.
Warning: Do not set this to your /home directory.


Figure 2.35: Configuring backups

36


2.5.2 Restoring a backup
You can restore all backup files that you have created using WebHost Manager. Note: WebHost Manager copies
over each previous backup with the latest backup. For example, each daily backup copies over the previous daily
backup, and each weekly backup copies over the previous weekly backup.
To restore a backup:

1. Click on the Restore Backups link in the Backup menu.
2. Click on one of the following buttons:

•

•

•

3. Click on the user name from the available list that you want to backup.
4. Click on the following tick boxes as required:

• Recreate account – Recreate the account entirely as part of the restore, rather than just overwriting
existing files.
• Give Ip address – Give the account an IP address as part of the restore.
• Restore Subdomain Entries – Restore the accounts subdomains as part of the restore.
• Restore Mail config – Restore the accounts mail configuration as part of the restore.
• Restore Mysql Dbs – Restore any MySQL databases as part of the restore.


Figure 2.36: Restoring a backup

37


2.5.3 Restoring multiple backups
You can restore multiple backups at one time. You can only restore multiple backups of the same type, daily,
weekly, or monthly.
To restore multiple backups:

1. Click on the Restore multiple backups link in the Backup menu.

2. Click on the , , or button to select the type of backup you want to restore.

3. Click on the tick boxes next to the backup files that you want to restore, or click on the
button.


2.5.4 Rolling back files
WebHost Manager automatically saves a backup version of the following three files whenever they are changed:

• httpd.conf
• named.conf
• proftpd.conf

You can revert to any of the previously saved versions whenever required. The restored version becomes the latest
version, and does not delete other versions.
To roll back a file:

1. Click on the Config File Rollback link in the Backup menu.
2. Click on one of the following buttons:

•

•

•

3. Click on the button to review previous versions. As you change files, the Date field will update and the
display area will update with the contents of the different file.

4. Click on the button to roll back to the displayed version of the file.

Figure 2.37: Rolling back a file

38

2.6. SYSTEM REBOOT CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.6 System Reboot
WebHost Manager has two reboot functions available:

• Graceful – A graceful server reboot attempts to shutdown all processes on your server and then reboot
the system. This is a similar process to the reboot command.
• Forceful – A forceful server reboot forces the system to restart and may not always shutdown all running
processes. This process should not be used unless a graceful server reboot does not work.

Note: Make sure you save information in open applications before you reboot, as unsaved information will be
lost.
Note: A forceful reboot may cause data loss. However, it is a better option than a hard reset.
To reboot your server:

1. Click on the Graceful Server Reboot or Forceful Server Reboot link in the System Reboot menu.


39

2.7. SERVER STATUS CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.7 Server Status
WebHost Manager can display a variety of server information:

• Service Status – Displays what services are running on your server, as well as server load, memory usage,
swap usage, and hard drive space usage. Running services have a green circle next to them, while failed
services have a red circle next to them.
• Server Information – Displays information about the hardware and software conﬁguration on your server.
This includes processor type, and speed, memory information, system software, drive information, memory
usage, and drive space usage.
• Apache Status – Displays information about Apache. Most of the information is displayed in a table with
a key to the symbols used underneath the table.
• CPU Usage - Displays a table of processes that use CPU, memory, and MySQL processes. The table
displays who is using the process, CPU usage %, Memory usage %, and MySQL usage.

More system information can be found in the page 84 section. Refer to page 72 for more information about
MySQL processes.
To display server information:

1. Click on the Service Status, Server Information, Apache Status, or Cpu/Memory/MySQL Usage
History link in the System Reboot menu.
2. View the displayed information.

Figure 2.38: Viewing server status

40

2.8. ACCOUNT FUNCTIONS CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.8 Account Functions
The Account Functions area deals with all of the functions necessary to create and manage web hosting accounts,
from creating and editing accounts to mailing all user and listing all subdomains. Refer to the many sub-topics
below for more information on using the account functions in WebHost Manager.

2.8.1 Listing accounts
The List Account function displays all of the accounts on your server. It displays a variety of detailed information
including the account’s domain name, IP number, user name, contact email, partition location, and disk space
quota. At the bottom of the list is the total number of accounts and a search function that enables you to search
for specific types of accounts.
To list your accounts:

1. Click on the List Accounts link in the Account Functions menu.
2. A detailed list of accounts on your server is displayed. If you need to find a subset of your accounts, click

on one of the listed radio buttons, enter the search criteria in the available field, and click on the
button.

Figure 2.39: Listing your accounts

2.8.2 Creating a new account
WebHost Manager enables you to quickly add new accounts – you simply fill in the fields to specify the account
details. Using packages will speed up this process considerably – refer to page 61 for more information. Note:
The CPanel / WebHost Manager package does not support domains or usernames that start with numbers. Do
not create accounts that start with numbers as you will not be able to use some functions on these accounts.
To create a new account:

1. Click on the Create a New Account link in the Account Functions menu.
2. If you want to use a predefined package for this account, click on the required option in the Package
drop-down list. This will fill in many of the fields automatically.
3. Enter the domain name and username of the account in the Domain and UserName fields. The User-
Name field will automatically populate with the first 8 characters of the domain name, but you can change
this to whatever you want.
4. Enter the password and disk space quota for the account in the Password and Quota fields.

41


5. Indicate whether this account is an IP address or not in the Ip tick box. If ticked, all accounts created with
this package can not use a domain name.
6. Indicate whether CGI access, Shell access, and Frontpage Extensions are allowed in the CGI Access, Shell
Access, and Frontpage Extentions tick boxes.
7. Enter the maximum number of items allowed in the Max Ftp Accounts, Max Email Accounts, Max
Email Lists, Max SQL Databases, Max Sub Domains, Max Park Domains, and Max Addon
Domains fields.
Note: Enter the text unlimited if you do not want to place a limit on any particular item.
8. Enter the maximum bandwidth in megabytes allowed by the account in the Bandwidth Limit field.
9. Click on the default CPanel theme for the account in the Cpanel Theme field.
10. If this is an IP account, you can choose what available IP address is used from the IP Address drop-down
list.


Figure 2.40: Creating a new account

2.8.3 Skeleton directory
The skeleton directory is the directory template that is used to create all new accounts - any files that are placed
in the skeleton directory are automatically copied into new accounts. For example, if you placed an index.html
file in the /public html folder in your skeleton directory, all new accounts will have that automatically include
that file.
To display the skeleton directory path:

1. Click on the Skeleton Directory link in the Account Functions menu.
2. The skeleton directory path is now displayed.

42


Figure 2.41: Displaying the skeleton directory path

2.8.4 Terminating an account
You can terminate old or problematic accounts at any time. Terminating a problematic account should be a
last resort – you can always suspend an account until the problems are resolved. Refer to page 46 for more
information.
To terminate an account:

1. Click on the Terminate an Account link in the Account Functions menu.

2. Click on the required domain or user name in the displayed list and click on the button.
Use the user name function if a user has several different accounts, all of which need to be terminated.

Figure 2.42: Terminating an account

2.8.5 Modifying an account
You can modify many account details at any time. You can modify the domain and user name, CPanel theme,
maximum email and FTP accounts, and other items. You can also modify an account’s details by changing
packages – refer to page 44 for more information.
To modify an account:

1. Click on the Modify an Account link in the Account Functions menu.

3. Edit the displayed fields as required. Refer to page 41 for a description of each field, if required.


43


Figure 2.43: Modifying an account

2.8.6 Upgrading or downgrading an account
You can modify an account by upgrading or downgrading the package used for the account. This enables you to
make wide-ranging changes quickly and consistently according to your pricing and package structure.
To upgrade or downgrade an account:

1. Click on the Upgrade / Downgrade an Account link in the Account Functions menu.

2. Click on the domain or user name in the displayed list and click on the button.

3. Click on the new plan in the displayed list and click on the button.
Note: Changing plans does not modify CGI access and does not aﬀect whether they have an IP or not.

Figure 2.44: Upgrading an account

2.8.7 Rearranging an account
WebHost Manager enables you to change the location of an account at any time. This is usually used when the
available disk space on a server is low and you need to move accounts to another partition or drive. Note: Refer
to page 54 if you need to move accounts from one server to another.
To rearrange an account:

1. Click on the ReArrange Accounts link in the Account Functions menu.

2. Click on the domain or user name in the displayed list and click on the button.
3. Click on the required drive to move the account to from the available drop-down list and click on the

button.

44


Figure 2.45: Rearranging an account

2.8.8 Viewing bandwidth usage
You can view the total bandwidth used, broken down by account, on your server per month. Note: Only
HTTP, POP mail, and FTP traﬃc statistics are currently monitored for bandwidth. You need to use a third-
party bandwidth management tool to track other types of bandwidth usage, such as mrtg .
To view bandwidth usage:

1. Click on the View Bandwidth Usage link in the Account Functions menu.
2. View the displayed bandwidth usage.

Figure 2.46: Viewing bandwidth usage

2.8.9 Limiting bandwidth usage
WebHost Manager enables you to limit the bandwidth usage of a particular domain or all the domains of a
particular user. Note: Bandwidth usage is only checked once a day, between midnight and 6am server time.
To limit bandwidth usage:

1. Click on the Limit Bandwidth Usage link in the Account Functions menu.


3. Enter the bandwidth limit for the account in the Bandwidth Limit ﬁeld and click on the
button.

Figure 2.47: Limiting the bandwidth on an account

45


2.8.10 Suspending or unsuspending an account
WebHost Manager enables you to suspend problematic accounts. Suspension simply means that no web site pages
are served to accounts, no FTP connections are accepted, and all email is blocked. Suspension is the ﬁrst step
in dealing with problematic accounts. If the problems can not be resolved, the account needs to be terminated –
refer to page 43 for more information.
To suspend or unsuspend an account:

1. Click on the Suspend or Unsuspend an Account link in the Account Functions menu.
2. Click on the required domain or user name in the displayed list.
3. Enter a brief description of why the account is being suspended in the Reason ﬁeld, if you are suspending
an account.
4. Click on the Disallow resellers from unsuspended tick box if you do not want the reseller who signed
up this account unsuspending it.

5. Click on the or button.

Figure 2.48: Suspending an account

2.8.11 Listing suspended accounts
You can list all of the suspended accounts on your server at any time.
To list suspended accounts:

1. Click on the List Suspended Accounts link in the Account Functions menu.
2. A list of suspended accounts is now displayed.

Figure 2.49: Listing suspended accounts

46


2.8.12 Modifying the Suspended Account page
The Suspended Account page is the HTML page that account holders will see when they attempt to log in to
their account. You can modify the default page to appear however you want.
To modify the Suspended Account page:

1. Create an HTML page that appears exactly how you want it to appear.

2. Click on the Modify Suspended Account Page link in the Account Functions menu.
3. Copy and paste the HTML code of your modified page over the content of the default Suspended Account

page and click on the button.

Figure 2.50: Modifying the Suspended Account page

2.8.13 Modifying quotas
You can alter how much disk space an account can use in the Quota Editor at any time. Note: If all of your
account’s quota amounts are listed as zero, which you know as incorrect, then your quota.user file is probably
corrupt. Run the script at /scripts/fixquotas.
To alter an account’s disk space quota:

1. Click on the Quota Modification link in the Account Functions menu.

2. Enter the new quota amount next to the required account in the Quota field and click on the
button.
3. Repeat the procedure for multiple accounts.

Figure 2.51: Altering an account’s disk space quota

47


2.8.14 Modifying an account password
You can change an account’s password at any time, usually when the account holder can not remember their
password.
To change an account’s password:

1. Click on the Password Modiﬁcation link in the Account Functions menu.


Figure 2.52: Changing an account’s password

2.8.15 Emailing all users
WebHost Manager enables you to send an email to all users on your server at any time. By default this email
only goes to direct account holders, but you can specify that the email should be sent to all reseller accounts as
well.
To email all users:

1. Click on the Email all users link in the Account Functions menu.
2. Click on the Click Here to Attempt to Guess... link at the top of the window to have WebHost Manager
guess the email addresses of accounts that have not entered an email address, if required.
3. Enter the name, email address, and subject of this email in the From Name, From Email, and Subject
ﬁelds.
4. Enter the email in the main display area.
5. Click on the Send Email to Reseller’s Customers tick box if you want to send this email to reseller’s
clients as well as your own clients, if required.


48


Figure 2.53: mailing all users

2.8.16 Displaying all accounts
WebHost Manager can display a summary list of active and inactive accounts at any time. Inactive accounts are
by definition suspended; active accounts are by definition not suspended.
To display all accounts:

1. Click on the Show Active and Inactive Accounts link in the Account Functions menu.
2. A list of all active and inactive accounts is now displayed.

Figure 2.54: Displaying all accounts

2.8.17 Changing account ownership
Occasionally an account may be listed as belonging to one reseller when it actually belongs to another. WebHost
Manager enables you to change the ownership of an account from one reseller to another at any time.
To change account ownership:

1. Click on the Change ownership of an account link in the Account Functions menu.


3. Click on the correct owner in the available drop-down list and click on the button.

Figure 2.55: Changing account ownership

2.8.18 Enabling or disabling demo mode
You can use WebHost Manager’s demo mode feature to turn any account into a demo account. A demo account
restricts a user’s ability to alter files and folders, but still appears to be fully functional. Demo mode is usually
used as a sales tool for prospective clients.
To enable or disable demo mode:

49


1. Click on the Disable or Enable Demo Mode on an Account link in the Account Functions menu.


3. Click on the button to enable demo mode or click on the button to disable demo
mode.

Figure 2.56: Enabling demo mode

2.8.19 Showing reseller accounts
The Show Reseller Accounts function displays a list of reseller and non-reseller accounts on your server.
To show reseller accounts:

1. Click on the Show Reseller Accounts link in the Account Functions menu.
2. A list of reseller (labeled Resold) and non-reseller (labeled Non-Resold) accounts is now displayed.

Figure 2.57: Showing reseller accounts

2.8.20 Downloading a raw Apache log
A raw Apache log is a server log that details every command that the Apache server processed over a specific time
period. This is a useful diagnostic tool when you are not quite sure what the problem is with a specific account.
To download a raw Apache log:

1. Click on the Download a Raw Apache Log link in the Account Functions menu.

2. Click on the required domain or user name from the displayed list and click on the
button.
3. Save the log file to disk.

50


Figure 2.58: Downloading a raw Apache log

2.8.21 Unsuspending all accounts that exceed bandwidth
All accounts that exceed their specified bandwidth maximum will receive a Bandwidth Exceeded message whenever
they try to log on to their account. You can unsuspend all accounts that exceed bandwidth until the next
bandwidth check (bandwidth checks occur once per day).
To unsuspend all accounts that exceed bandwidth:

1. Click on the Unsuspend all bandwidth exceeders link in the Account Functions menu.

2. Read the message and click on the button.

Figure 2.59: Unsuspending all accounts that exceed bandwidth

2.8.22 Fixing insecure CGI permissions
If you are having problems with SuExec and CGI permissions, you can use this function to fix the permissions
in suexec log for your cgi scripts. Note: You may need to use this function again after attempting to use an
insecure CGI script if the directory containing the scripts has insecure permissions.
To fix insecure CGI permissions:

1. Click on the Fix insecure permissions on cgi scripts. (requires suexec) link in the Account Functions
menu.
2. A status message is now displayed.

51


Figure 2.60: Fixing insecure CGI permissions

2.8.23 Changing a site’s IP address
You can change the IP address of a domain, if required.
To change a site’s IP address:

1. Click on the Change Site’s Ip Address link in the Account Functions menu.

2. Click on the domain name that you want to manage and click on the button.
3. Click on the new IP address from the New Address drop-down list.


2.8.24 Enabling or disabling shell access
You can enable or disable shell access for a particular account at any time.
To manage shell access:

1. Click on the Manage Shell Access link in the Account Functions menu.

2. Click on the or button next to the required account.

Figure 2.61: Disabling shell access

2.8.25 Listing subdomains
WebHost Manager enables you to list all subdomains on your server at any time. This function will display all
subdomains and parked domains, sorted by domain name.
To list all subdomains:

1. Click on the List SubDomains link in the Account Functions menu.

2. A list of subdomains and parked domains, sorted by domain name, is now displayed.

52


Figure 2.62: Listing all subdomains

53

2.9. TRANSFERS CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.9 Transfers
Assuming you are running WebHost Manager version 4.2 or newer on two servers, you can move domains from
one server to another. You can do this one account at a time using this procedure, or you can transfer multiple
domains at once – refer to page 55 for more information. Note: To transfer one account from a WebHost
Manager server with a username and password, refer to page 54 for more information.
To transfer one account from another server:

1. Click on the Copy an account from another server link in the Transfers menu.
2. Enter the IP address or domain name and server root password in the Server to copy from and Server
root password fields.
3. Enter the username of the account that you want to copy in the Username to copy field.
4. Click on the Give new account an ip address tick box if the account is using an IP address.
5. Click on the required radio button to indicate what type of control panel software the remote server is using.
6. If the SSH is disabled for the root user, you need to enter the user name and password of a user which is
part of the Wheel group (su) in the User with su access and User with su access password field.


Figure 2.63: Transferring one account from another server

2.9.1 Transferring one account from a WebHost Manager server with a password
You can quickly transfer one account from a WebHost Manager server if you have a username and password.
however, you can also transfer an account without the username and password (refer to page 54 for more infor-
mation).
To transfer one account from a WebHost Manager server with a password:

1. Click on the Copy an account from another server with account password link in the Transfers
menu.
2. Enter the IP address or domain name of the server to copy from in the Server to copy from field.
3. Enter the username and password for the account in the Username to copy and User’s password fields.
4. Click on the Give new account an ip address tick box to give the transferred account an IP address, if
required.


54

2.9. TRANSFERS CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

Figure 2.64: Transferring one account from a WebHost Manager server with a password

2.9.2 Transferring multiple account from another server
Assuming you are running WebHost Manager version 4.2 or newer on two servers, you can transfer multiple
domains from one server to another. You do not need to know the exact details of each account on the other
server as WebHost Manager will create a list of available accounts for you to transfer.
To transfer multiple account from another server:

1. Click on the Copy multiple accounts from another server link in the Transfers menu.
3. Click on the required radio button to indicate what type of control panel software the remote server is using.
4. If the SSH is disabled for the root user, you need to enter the user name and password of a user which is
part of the Wheel group (su) in the User with su access and User with su access password ﬁeld.


6. Click on the tick boxes next to the accounts that you want to copy or click on the button.


2.9.3 Transferring multiple account from a Alab*nza server
You can transfer multiple domains from a Alab*nza server to your server, if required. The access user must have
su access to root and the server must accept SSH connections from IP 216.118.116.107.
To transfer multiple account from a Alab*nza server:

1. Click on the Copy multiple accounts from an Alab*nza server link in the Transfers menu.

3. Enter the username and password for the server in the Access username and Access user’s password
ﬁelds.


5. Click on the tick boxes next to the accounts that you want to copy or click on the button.


55

2.10. THEMES CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.10 Themes
Themes are the GUI (Graphic User Interface) of WebHost Manager and CPanel – they control the ”look and
feel” of these applications. Both WebHost Manager and CPanel can have their own distinct themes, which can
range from a change of background color and logo (such as the default WebHost Manager themes) right through
to a complete re-write of what the application looks like and how to use it. Several companies have designed their
own custom themes for CPanel which are completely diﬀerent from the default and iconic themes that come with
the software. These changes are usually made for branding and usability purposes.

2.10.1 Changing the WebHost Manager theme
You can select a theme for WebHost Manager from the themes that you have installed. This theme only applies
to the user name with which you logged in.
To change the WebHost Manager theme:

1. Click on the Change WHM Theme link in the Themes menu.
2. Click on the required WebHost Manager theme.

Figure 2.65: Changing the WebHost Manager theme

2.10.2 Adding a CPanel theme
You can install and update CPanel themes provided directly by DarkOrb. These will automatically update each
time you update CPanel.
To add a CPanel theme:

1. Click on the Addon cPanel Themes link in the Themes menu.
2. Click on the Install and Keep Updated tick box next to the themes that you want to install.


Figure 2.66: Adding a CPanel theme

56


2.10.3 Adding a WebHost Manager theme
You can install and update WebHost Manager themes provided directly by DarkOrb. These will automatically
update each time you update WebHost Manager.
To add a WebHost Manager theme:

1. Click on the Addon WHM Themes link in the Themes menu.
2. Click on the Install and Keep Updated tick box next to the themes that you want to install.


Figure 2.67: Adding a WebHost Manager theme

2.10.4 Setting the default WebHost Manager theme
You can set the default WebHost Manager theme for all users who do have not chosen a speciﬁc WebHost Manager
theme.
To set the default WebHost Manager theme:

1. Click on the Set Default WHM Theme for All Users link in the Themes menu.
2. Click on the required WebHost Manager theme.

Figure 2.68: Setting the default WebHost Manager theme

2.10.5 Listing installed themes
You can view a list of all of your currently installed themes, divided into WebHost Manager and CPanel themes.
To list installed themes:

57


1. Click on the List Installed WHM Themes or List Installed Cpanel Themes link in the Themes
menu.
2. View the displayed list of themes. Refer to page 58 if you want to install a new theme.

Figure 2.69: Listing installed themes

2.10.6 Installing a new theme
WebHost Manager enables you to upload and install a new theme. This gives you the capability to create and
use your own themes on both WebHost Manager and CPanel. New themes need to be archived using tar, using
the directory structure shown in WebHost Manager, and have a ﬁle extension of .whmtheme or .cptheme. You
can see how currently installed themes work by downloading them – refer to page 59 for more information.
To install a new theme:

1. Click on the Install a New WHM Theme or Install a New Cpanel Theme link in the Themes menu.
2. Make sure your tarred theme conforms to the displayed directory structure.

3. Use the button to select the theme that you want to upload.


Figure 2.70: Installing a new theme

58


2.10.7 Deleting a CPanel theme
You can delete a CPanel theme when it is no longer required. Make sure that no users are using this theme before
you delete it. Note: If any users have themes that are automatically updated, they will reappear on this list.
To successfully delete these themes, you need to remove the following script: /scripts/postupcp.
To delete a CPanel theme:

1. Click on the Delete a Cpanel Theme link in the Themes menu.
2. Click on the link to the theme that you want to delete.

Figure 2.71: Deleting a CPanel theme

2.10.8 Cloning a CPanel theme
WebHost Manager enables you to clone an existing theme, which you can then download and alter as you require.
This is usually done for branding purposes – you only want to add your logo and do not want to create a new
theme from scratch.
To clone a CPanel theme:

1. Click on the Delete a Cpanel Theme link in the Themes menu.
2. Click on the link to the theme that you want to clone.

3. Enter the name for the new theme in the available field, and click on the button.

Figure 2.72: Cloning a CPanel theme

2.10.9 Downloading a themeball
You can download installed themes for WebHost Manager or CPanel as a themeball – a tarred group of all the
files required for a theme. You can use this to brand the downloaded theme with your company’s logo or use it
as an example of how to create a brand new theme.
To download a themeball:

1. Click on the Download a Cpanel Themeball or Download a WHM Themeball link in the Themes
menu.
2. Click on the link to the theme that you want to download.
3. Save the themeball to a specific location.

59


Figure 2.73: Downloading a themeball

2.10.10 Creating a new theme
You can create a CPanel or WebHost Manager theme from scratch, as long as you have the time. The best way
to create a theme is to download a themeball of one of the working themes to use as an example – refer to page
59 for more information. You can ﬁnd the API info in /usr/local/cpanel/*api.txt You can use PHP code in
CPanel themes. Example:

$varible = ’<cpanel print="$CPDATA{’DNS’}"textgreater’;

Perl scripts can also be included in theme pages. In the following example, ex.pl would contain perlapi.txt
commands as well as Perl code.

<perl /usr/local/cpanel/base/frontend/default/ex.pltextgreater

60

2.11. PACKAGES CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.11 Packages
Packages enables you to create your own custom web hosting packages and are a critical function in WebHost
Manager. These packages form the core service of your web hosting business, and your pricing structure needs
to be carefully thought out. WebHost Manager helps you in this process by allowing you to customize a large
number of parameters, from disk space and bandwidth to the number of sub-domains and MySQL databases, as
well as specifying whether CGI, shell access, and what CPanel default theme are provided.
To add a package:

1. Click on the Add a New Package link in the Packages menu.
2. Enter the name of the package and the maximum disk space the account can occupy in the Package Name
and Quota fields.
3. Indicate whether SSL access is allowed in the Shell Access tick box.
4. Enter the maximum number of items allowed in the Max Ftp Accounts, Max Email Accounts, Max
Email Lists, Max SQL Databases, Max Sub Domains, Max Park Domains, and Max Addon
Domains fields.
Note: Enter the text unlimited if you do not want to place a limit on any particular item.

5. Indicate whether this account is an IP address or not in the Ip tick box. If ticked, all accounts created with
this package can not use a domain name.
6. Indicate whether CGI access and Frontpage Extensions are allowed in the CGI Access and Frontpage
Extentions tick boxes.

7. Enter the maximum bandwidth in megabytes allowed by the account in the Bandwidth Limit field.
8. Click on the default CPanel theme for the account in the Cpanel Theme field.


Figure 2.74: Adding a package

61


2.11.1 Deleting a package
You can delete packages that are no longer necessary.
To delete a package:

1. Click on the Delete Packages link in the Packages menu.

2. Click on the package that you want to delete and click on the button.

Figure 2.75: Deleting a package

2.11.2 Editing a package
You can alter all aspects of a package whenever you need to change the package. These changes will not effect
accounts that were created with the changed package, however it will effect new accounts using this package.
To edit a package:

1. Click on the Edit Packages link in the Packages menu.

2. Click on the required package and click on the button.
3. Alter the fields as required. Refer to page 61 for a description of each field, if required.

4. Click on the button when you have finished editing the package.

62


Figure 2.76: Editing a package

63

2.12. DNS FUNCTIONS CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.12 DNS Functions
The DNS Functions area manages all aspects of DNS, from parking a domain to adding a DNS zone.

2.12.1 Parking or pointing a domain
WebHost Manager enables you to park a domain on top of another domain, which effectively points all HTTP
and email traffic from the parked domain to the domain it is parked on top of.
To park or point a domain:

1. Click on the Park or Point a Domain link in the Dns Functions menu.
2. Enter the domain that you want traffic pointed to in the Domain to park on top of field.
3. Enter the domain that you want to park in the Domain to park field.
Example: You want to point all HTTP and email traffic from innovation.co.nz to business.co.nz. Enter
business.co.nz in the Domain to park on top of field and innovation.co.nz in the Domain to park field.

Figure 2.77: Parking a domain

Unparking a domain
You can unpark a parked domain at any time.
To unpark a domain:

1. Click on the List Parked Domains link in the Dns Functions menu.
2. Click on the UnPark link next to the required domain.

Figure 2.78: Unparking a domain

2.12.2 Listing parked domains
You can list all domains that are parked on your server, sorted by the domains they are parked on top off. You
can use this list to add mail configuration to the primary domain’s CPanel, which adds the domain so the account

64


can modify forwarders and default address for that domain. You can also use this list to unpark domains – refer
to page 64 for more information.
To list parked domains:

1. Click on the List Parked Domains link in the Dns Functions menu.
2. A list of parked domains is displayed, sorted by domain.
3. Click on the Add Mail Config to user’s CPanel link to add mail configuration to the primary domain’s
CPanel, if required.

Figure 2.79: Listing parked domains

2.12.3 Adding an A entry for your hostname
An A entry is an Address entry, and can be entered at any time for your hostnames
To add an A entry for your hostname:

1. Click on the Add an A entry for your hostname link in the Dns Functions menu.

2. Click on the button if the displayed information looks correct.

Figure 2.80: Adding an A entry for your hostname

2.12.4 Adding a DNS zone
A DNS zone is a part of your domain name but it may contain different DNS information. For example, if
you added the DNS zone training.business.co.nz to business.co.nz, you could edit the properties of the train-
ing.business.co.nz DNS zone to be whatever you wanted. Refer to page 66 for more information about editing a
DNS zone. Note: You will need to wait a few hours for the DNS zone to propagate.
To add a DNS zone:

1. Click on the Add a DNS Zone link in the Dns Functions menu.
2. Enter the IP address or domain name of the DNS zone in the Ip or Domain field.


65


Figure 2.81: Adding a DNS zone

Editing a DNS zone
WebHost Manager enables you to change a wide variety of DNS information at any time. Refer to the ISC’s Bind
web page for more information about DNS zones.
To edit a DNS zone

1. Click on the Edit a DNS Zone link in the Dns Functions menu.

2. Enter the DNS zone that you want to edit in the Zone to Edit field and click on the button.

3. Alter the DNS fields as you require, and click on the button when you have finished.

Figure 2.82: Editing a DNS zone

Deleting a DNS zone
You can delete a DNS zone at any time.
To delete a DNS zone:

1. Click on the Delete a DNS Zone link in the Dns Functions menu.

2. Click on the required DNS zone from the displayed list and click on the button.

Figure 2.83: Deleting a DNS zone

66


2.12.5 Editing an MX entry
WebHost Manager enables you to alter MX (Mail Exchange Record) Entries at any time. By altering an MX
Entry you can point the email for a particular domain to another mail server, if required.
To edit an MX entry:

1. Click on the Edit an MX Entry link in the Dns Functions menu.

2. Click on the required domain in the list and click on the button.

3. Enter the new domain that email will be sent to and click on the button.

Figure 2.84: Editing an MX entry

2.12.6 Performing a DNS cleanup
WebHost Manager enables you to clean up your nameserver configuration file whenever required. Note: Make
sure you are not editing any nameserver configuration files during the clean up.
To perform a DNS cleanup:

1. Click on the Perform a DNS Cleanup link in the Dns Functions menu.

2. Read the warning. Click on the button when you are ready.

2.12.7 Establishing a trust relationship
You can establish a master/primary nameserver relationship at your server setup level – refer to page 15 for more
information. If you do set up a primary nameserver, you need to establish a trust relationship between the two
servers so that you can add all DNS entries from the primary nameserver. This saves you having to log on to
multiple servers to set up various DNS entries.
To establish a trust relationship with a primary nameserver:

1. Click on the Establish A Trust Relationship With a Primary Nameserver link in the Dns Functions
menu.
2. Enter the root password for the trusted nameserver in the Master Server Root Password field.


Figure 2.85: Establishing a trust relationship with a primary nameserver

67


2.12.8 Synchronizing DNS records
If you have established a trust relationship with a primary nameserver, you will need to synchronize the DNS
records between the primary and secondary nameservers after you have added new DNS entries.
To synchronize DNS records with the primary nameserver:

1. Click on the Synchronize DNS Records With Primary Nameserver link in the Dns Functions menu.

2. A status list is now displayed.

Figure 2.86: Synchronizing DNS records with the primary nameserver

2.12.9 Domain forwarding
WebHost Manager enables you to forward all traffic from your current domain to another domain. You can only
forward the top level domain to another location, not any specific folders of subdomains of the domain.
To setup a domain forwarder:

1. Click on the Setup/Edit Domain Forwarding link in the Dns Functions menu.
2. Enter the domain that you want to forward in the Domain field, and the forwarding URL address in the
Redirection URL field. Repeat as required.


Figure 2.87: Setting up a domain forwarder

68

2.13. FRONTPAGE CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.13 FrontPage
For better or worse, FrontPage is an extremely popular web site design tool. In order to support clients who
use FrontPage, you need to install FrontPage extensions on their site so that the Frontpage’s ”quirks” will work
correctly on a Linux server. If you need to reinstall FrontPage extensions for an account, uninstall the current
extensions ﬁrst before reinstalling.
Note: DarkOrb does not encourage the use of FrontPage nor does it take responsibility for any of the things
that FrontPage, or any other Microsoft product, does to your server.
To install or uninstall FrontPage extensions:

1. Click on the Install FrontPage Web Extentions or Uninstall FrontPage Web Extentions link in
the FrontPage menu.
2. Click on the required domain or user in the displayed lists.

3. Click on the or button.

Figure 2.88: Installing FrontPage extensions

2.13.1 Installing FrontPage mail extensions
Some clients may need FrontPage mail extensions installed. This function will ﬁnd all accounts that do not have
any mail extensions installed and will install FrontPage mail extensions.
To install FrontPage mail extensions:

1. Click on the Install FrontPage Mail Extentions link in the FrontPage menu.
2. A status list of the search and installation process is now displayed.

Figure 2.89: Installing FrontPage mail extensions

69

2.14. MYSQL CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.14 MySQL
The MySQL area enables you to repair a database, change passwords, and show what MySQL processes are in
use.

2.14.1 Resetting the MySQL root password
You can reset your MySQL root password using WebHost Manager. This function should only be used if you
are unable to change the password and have received a permission denied error. Try to reset the password
using the Set MySQL Root Password function ﬁrst before following this procedure. Refer to page 25 for more
information.
To reset the MySQL root password:

1. Click on the Reset MySQL Root Password link in the MySQL menu.

2. Enter the new password in the ﬁeld provided and click on the button.

Figure 2.90: Resetting the MySQL root password

2.14.2 Adding a MySQL access host
You can add additional hosts that are able to access MySQL databases on this server. You can also specify a
remote MySQL server, as long as you provide the proper user name and password.
To add one or more MySQL access hosts:

1. Click on the Modify Additional MySQL Access Hosts link in the MySQL menu.
2. Enter the additional host information, one per line. For example:
66.96.192.%

Note: These hosts will only become active on a user’s machine after they have logged on to CPanel and
entered the MySQL databases area. If you want all users to be updated automatically, click on the Click

Here! link (not the button).

70


Figure 2.91: Adding a MySQL access host

2.14.3 Setting up a remote MySQL server
You can change the MySQL server from the local server (”localhost”) to point to a remote server. This allows
MySQL functions to be performed by another computer.
To set up a remote MySQL server:

1. Click on the Setup Remote MySQL server link in the MySQL menu.
2. Enter the name of the remote server in the Remote Mysql Host field and its password in the Remote
Mysql Host’s Root Password field.
Note: Do not enter the root password for the remote MySQL server in the Remote Mysql Host’s Root
Password field.


Figure 2.92: Setting up a remote MySQL server

2.14.4 Repairing a database
You can attempt to repair a MySQL database using WebHost Manager. The function checks each table for errors
and attempts to fix them.
To repair a database:

1. Click on the Repair a DataBase link in the MySQL menu.

2. Click on the database that you want to repair in the displayed list and click on the
button.
3. A status list is displayed, stating which tables have been checked and the result.

71


Figure 2.93: Repairing a database

2.14.5 Changing passwords
You can use WebHost Manager to change the password of any MySQL user or database on your server.
To change a user or database password:

1. Click on the Change an User or Database Password link in the MySQL menu.
2. Click on the required database or user name in the list

3. Enter the new password in the New Password ﬁeld and click on the button.

Figure 2.94: Changing a database password

2.14.6 Showing MySQL processes
WebHost Manager can create a list of all of the currently active MySQL processes on your server, including the
user name, command being used, its state, and general information. Refer to page 40 for more information about
viewing general server and system processes.

72


To show MySQL processes:

1. Click on the Show MySQL Processes link in the MySQL menu.
2. A list of currently used processes is displayed.

73

2.15. IP FUNCTIONS CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.15 IP Functions
The IP Functions area enables you to add and manage IP addresses, including adding and reserving addresses
and displaying IP usage.

2.15.1 Showing or deleting current IP addresses
You can display a list of all of the IP addresses that are linked to your server. You can delete IP addresses from
this list, except for your server’s dedicated IP address.
To show or delete current IP addressed:

1. Click on the Show or Delete Current IP Addresses link in the Ip Functions menu.
2. A list of current IP addresses is displayed. Click on the Remove link to delete a particular IP address.

Figure 2.95: Deleting a current IP address

2.15.2 Adding a new IP address
WebHost Manager enables you to add a new IP address at any time, along with the addresses required subnet
mask. Note: You must use Class C CIDR format when adding multiple IP addresses. Refer to this Overview
of CIDR for more information.
To add a new IP address:

1. Click on the Add a New IP Address link in the Ip Functions menu.
2. Enter the IP address in the Ip(s) to add ﬁeld.
3. Alter the subnet mask default values for this IP address in the Subnet Mask ﬁeld, if required.


Figure 2.96: Adding a new IP address

74


2.15.3 Rebuilding the IP address pool
WebHost Manager enables you to rebuild the IP address pool at any time. Rebuilding the IP address pool frees
up IP addresses and updates /etc/ipaddrpool.
To rebuild the IP address pool:

1. Click on the Rebuild the IP Address Pool link in the Ip Functions menu.

2. A status list is now displayed.

Figure 2.97: Rebuilding the IP address pool

2.15.4 Reserved IP addresses
WebHost Manager enables you to reserve IP addresses so that they will not be used when automatically assigning
IP addresses to new accounts. (This only applies to new accounts that are created using the Ip tick box – refer
to page 41 for more information.)
To show or edit reserved IP addresses:

1. Click on the Show/Edit Reserved Ips link in the Ip Functions menu.
2. A list of current IP addresses is displayed. Reserved IP addresses have a tick in the tick box next to the
address.

3. Click on the tick box next to the address to reserve or unreserve the address and click on the
button.

Figure 2.98: Reserving an IP address

2.15.5 Showing IP address usage
You can display a list of all of the IP addresses on your server and what domain names they point to.
To show IP address usage:

1. Click on the Show IP Address Usage link in the Ip Functions menu.
2. A list of IP addresses and associated domains is now displayed.

75


Figure 2.99: Showing IP address usage

76

2.16. DISK DRIVES CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.16 Disk Drives
You can format or mount a new hard drive at any time using WebHost Manager. You can also optimize an EIDE
hard drive (refer to page 77 for more information). Note: Formatting a hard drive will delete all information
on that hard drive.
To format or mount a new hard drive:

1. Click on the Format/Mount a new Harddrive link in the Disk Drives menu.
2. Follow the displayed instructions.

2.16.1 Optimizing an EIDE hard drive
WebHost Manager allows you to optimize EIDE (Enhanced Integrated Drive Electronics) drives for signiﬁcant
performance speed and performance increases. Warning: This function may cause your server to lock up or
crash when performed on older chip sets. Use at your own risk.
To optimize an EIDE hard drive:

1. Click on the Optimize EIDE Harddrives link in the Disk Drives menu.

2. Read the displayed warning. Click on the button if you want to proceed.

Figure 2.100: Optimizing an EIDE hard drive

77

2.17. SOFTWARE CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.17 Software
The Software area deals with installing and updating server and system software on your server.

2.17.1 Installing an RPM
RPM (Red Hat Package Manager) is a common way of installing software. WebHost Manager enables you to
install a large number of diﬀerent packages, if and when required, and re-install them if a problem occurs.
To install an RPM:

1. Click on the Install a RPM link in the Software menu.
2. Click on the package that you want to (re)install.
3. Click on the Ignore Dependencies tick box if you want WebHost Manager to ignore any dependencies
that may occur during installation.
4. Click on the Force Install tick box if you are reinstalling a package.


Figure 2.101: Reinstalling an RPM

2.17.2 Rebuilding the RPM database
The database that keeps track of your RPM (Red Hat Package Manager) installations can become corrupt. You
should only perform this function when technical support advises you that it is the correct course of action.
To rebuild the RPM database:

1. Click on the Rebuild RPM Database link in the Software menu.

Note: This procedure may take 1-30 minutes, depending on the speed of your machine.

78

2.17. SOFTWARE CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

Figure 2.102: Rebuilding the RPM database

2.17.3 Installing a Perl module
Perl modules are a collection of Perl scripts that allow you to perform one or more functions. WebHost Manager
enables you to install a number of Perl modules if and when you require them.
To install a Perl module:

1. Click on the Install a Perl Module link in the Software menu.

2. Enter the name of the Perl module that you want to install in the available ﬁeld and click on the
button.
3. Click on the link to install the required Perl module.

Figure 2.103: Installing a Perl module

2.17.4 Updating server or system software
WebHost Manager provides you with the ability to update your server or system software or backend scripts at
any time. When activated, WebHost Manager will compare the current server and system software and backend
scripts against its list of upgrades kept on its upgrade server, and upgrades any older versions automatically.
To update your server software:

1. Click on the Update Server Software, Update System Software, or Update Backend Scripts link
in the Software menu.
2. A software status list is now displayed with any updates performed, if any.

79

2.18. SECURITY CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.18 Security
The Security area deals with security issues, from scanning for security beaches and Trojan Horses to modifying
Apache’s memory usage limit.

2.18.1 Running a quick security scan
WebHost Manager can perform a quick security scan of your server that attempts, in test mode, to shut down
various essential services. If any of these tests succeed, there has been a security breach of your server. Note:
You may see [FAILED] next to one or more tests when you run the scan. This usually indicates that the service
was shut down normally prior to the scan, and does not normally indicate that there has been a security breach.
To run a quick security scan:

1. Click on the Quick Security Scan link in the Security menu.
2. A list of results is now displayed.

2.18.2 Modifying Apache memory usage limit
WebHost Manager includes a function that automatically calculates the memory limit needed by Apache and
resets the memory used by Apache to that amount. This frees up your memory for other operations, and is useful
on full servers.
To modify the Apache memory usage amount:

1. Click on the Modify Apache Memory Usage Limit link in the Security menu.
2. A result list is now displayed.

Figure 2.104: Modifying the Apache memory usage amount

2.18.3 Scanning for Trojan Horses
WebHost Manager includes a function that enables you to scan your server for Trojan Horses. A Trojan Horse is
a malicious, security-breaking program that is disguised as something benign, such as a directory lister, archiver,
or game. Like all viruses Trojan Horses can hide inside files for long periods of time. Note: All files found
during this search are only suspected Trojan Horses. This scan only denotes the possibility of a virus in the file.
To scan for Trojan Horses:

1. Click on the Scan for Trojan Horses link in the Security menu.

2. A results list is now displayed.

80

2.18. SECURITY CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

Figure 2.105: Scanning for Trojan Horses

81

2.19. EMAIL CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.19 Email
The Email area allows you troubleshoot problematic email addresses, manage your mail queue, and view email
statistics for your server.

2.19.1 Using the Mail Troubleshooter
The Mail Troubleshooter function enables you to send a test email to a problematic address to determine what
is wrong. This process will track down the vast majority of email problems that can occur on your server.
To use the Mail Troubleshooter:

1. Click on the Mail Troubleshooter link in the Email menu.
2. Enter the problematic email address in the ﬁeld provided. Click on the Address is on this server tick
box if required.


Figure 2.106: Using the Mail Troubleshooter

2.19.2 Managing the mail queue
The Exim Mail Queue area enables you to view all waiting messages in the mail queue, as well as attempt to
deliver or delete all the messages in the queue.
To manage the mail queue:

1. Click on the Manage Mail Queue link in the Email menu.
2. View the email as required.
3. Click on the Delete all messages in Queue link if you need to delete the email that are currently in the
queue.
Click on the Attempt to Deliver all messages in Queue link if you need to send the email now. This
is a good method of testing if something is functioning incorrectly with exim.

Figure 2.107: Deleting all email in the mail queue

82

2.19. EMAIL CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.19.3 Viewing email statistics
The View Mail Stats function displays a wide variety of information about email on your server, including total
volumes, how many messages were sent and delivered per hour, the top 50 accounts in terms of mail sent and
received, and a list of error messages.
To view email statistics:

1. Click on the View Mail Stats link in the Email menu.
2. View the displayed statistics.

Figure 2.108: Viewing email statistics

83

2.20. SYSTEM HEALTH CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.20 System Health
WebHost Manager can display a variety of system information that indicates the current health of the system:

• Current Disk Usage – Displays the current amount of disk space being used on each hard drive and
partition.
• Current CPU Usage – Displays the current CPU usage divided by process. More information about each
process is available by clicking on each processes Pid.
• Current Running Processes – Displays all currently running processes and their location.

More server information can be found in the page 40 section. Refer to page 72 for more information about MySQL
processes.
To display system information:

1. Click on the Show Current Disk Usage, Show Current CPU Usage, or Show Current Running
Processes link in the System Health menu.
2. View the displayed information. If you clicked on the Show Current CPU Usage link, you can display
more detailed information about each process by clicking on the Pid column link entry.

Figure 2.109: Viewing current CPU usage

2.20.1 Killing background processes
You can set WebHost Manager to automatically detect, kill, and email you about any one of the following
processes:

• BitchX – BitchX
• bnc
• eggdrop – Eggdrop sites
• guardservices
• ircd – ircd server page

84

2.20. SYSTEM HEALTH CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

• psyBNC – psyBNC tutorial
• ptlink
• services

It is recommended that you do not allow any of these processes to run on your servers. You can also add trusted
users who will not have these processes killed.
To kill a background process:

1. Click on the Background Process Killer link in the System Health menu.
2. Click on the tick boxes next to the processes that you want to automatically kill. It is recommended that
you do not allow any of these processes to run on your servers.
3. Enter the name of any trusted users in the available ﬁeld, if required. Enter one user per line, and all users
with an uid of less than 99 (including root, mysql, named, and cpanel) are automatically trusted.


Figure 2.110: Killing background processes

85

2.21. CPANEL 5 CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.21 CPanel 5
The CPanel 5 area contains a variety of miscellaneous features that help you to manage CPanel accounts.

2.21.1 Resetting a Shopping Cart
You can refresh a shopping cart that is not resetting by itself. This command is only designed to be used with
the shopping cart scripts that come pre-installed with CPanel.
To reset a shopping cart:

1. Click on the Reset a Shopping Cart link in the CPanel 5 menu.

2. Click on the domain name with the problem shopping cart and click on the button.

Figure 2.111: Resetting a shopping cart

2.21.2 Modifying CPanel / WHM news
You can display a customized version of the CPanel or WebHost Manager news, rather than use the default news
script. You can modify the following areas:

• Global CPanel News – Displays on the home page of all CPanels that you can eﬀect, including your own,
your resellers’, and your resellers’ customers’ CPanels.
• Global WHM News – Displays in the News area of all resellers’ WebHost Managers.
• Resold Customer News – Displays on the home page of all your resellers’ customers’ CPanels.

• CPanel News – Displays on the home page of all your customers’ CPanels (not your resellers’ customers’).

The News page is coded in HTML so you need to use HTML code when creating your own news content.
To modify CPanel or WebHost Manager news:

1. Click on the Modify cPanel/WHM News link in the CPanel 5 menu.
2. Enter or copy and paste the HTML code that you want to use into the relevant work areas.


86


Figure 2.112: Modifying CPanel news

2.21.3 Upgrading to the latest version
Upgrading to the latest version of CPanel is as simple as clicking on a button.
To upgrade to the latest version of CPanel:

1. Click on the Upgrade To Latest Version link in the CPanel 5 menu.


Figure 2.113: Upgrading to the latest version of CPanel

2.21.4 Resetting a Mailman password
You can change the password for any Mailman mailing list on your server, usually when a user has forgotten their
own Mailman password.
To reset a Mailman password:

1. Click on the Reset a Mailman Password link in the CPanel 5 menu.
2. Click on the Mailman user from the available list.

3. Enter the new Mailman password in the New Password ﬁeld and click on the button.

87


Figure 2.114: Resetting a Mailman password

2.21.5 Enabling or disabling Outlook Express autoconfiguration
WebHost Manager can enable or disable Outlook Express autoconfiguration files. These allow CPanel users to
simply click on a link next to an email address and your server will install Outlook Express registry settings
on their computer. This function prevents a lot of support requests, as configuring email clients is a common
problem for users. Note: This feature only works for users who are using Microsoft Windows.
To enable or disable Outlook Express autoconfiguration files:

1. Click on the Enable/Disable Outlook (Express) AutoConfig link in the CPanel 5 menu.

2. Click on the button to enable Outlook Express autoconfiguration files or click on the
button to disable Outlook Express autoconfiguration files.

Figure 2.115: Enabling Outlook Express autoconfiguration

2.21.6 Adding on scripts
WebHost Manager provides a number of script packages that you can pass on to your CPanel customers. You
can quickly install and uninstall these addon scripts as required, and if installed each script will be automatically
updated as part of the WebHost Manager update (refer to page 18 for more information).
To add on scripts:

1. Click on the Addon Scripts link in the CPanel 5 menu.
2. Click on the Install and Keep Updated tick box next to the packages that you want to install.


88


Figure 2.116: Adding on scripts

2.21.7 Synchronizing FTP passwords
You can synchronize FTP password ﬁles at any time.
To synchronize FTP passwords:

1. Click on the Synchronize FTP Passwords link in the CPanel 5 menu.

Figure 2.117: Synchronizing FTP passwords

89

2.22. SSL/TLS CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.22 SSL/TLS
The SSL/TLS area enables you to manage all areas of SSL certificates, from generating new certificates to
installing and changing them.

2.22.1 Changing a certificate
WebHost Manager enables you to change your CPanel and WebHost Manager certificate automatically, without
having to manually find and replace the certificate files. Refer to page 92 for more information about generating
a certificate. Note: The CPanel certificate is used in the https://www.yourdomain.com:2083 address and the
WebHost Manager certificate is used in the https://www.yourdomain.com:2087 address.
To change a certificate:

1. Click on the Change cPanel/WHM Certificate link in the SSL/TLS menu.
2. Enter the domain for the certificate in the Domain this CRT is for field.

3. Click on the button to paste the .key and .crt files for the domain into the available display spaces,
if they are currently on your server. Otherwise, copy and paste the .key and .crt files into the available
display areas.
Note: If you generated the certificate using WebHost Manager, the certificate files will be available. Refer


Figure 2.118: Changing a certificate

2.22.2 Using the SSL Manager
The SSL Manager enables you to view and download currently available keys, certificates, and certificate request
files. This enables you to keep track of certificates that you have generated with WebHost Manager.
To use the SSL Manager:

1. Click on the SSL Manager link in the SSL/TLS menu.

90


2. Click on the button to view the text of a file or the button to view the binary form of the file.

Figure 2.119: Using the SSL Manager

2.22.3 Purchasing and installing an SSL certificate
You can purchase an SSL certificate from an online vendor through WebHost Manager.
To purchase and install an SSL certificate:

1. Click on the Purchase & Install a SSL Certificate link in the SSL/TLS menu.
2. Click on the graphic of the company from which you want to purchase an SSL certificate.
3. Enter the host’s domain name in the Certificate Hostname field.
4. Enter the principal contact’s first and last name and email address in the Full Name and Email Address
fields.
5. Enter the name of the company the certificate is for, the company division, and the company’s mailing
address in the Company Name, Company Division, and Mailing Address fields.
6. Enter the city, state, and country code in the City, State, and Country fields.

7. Enter the postal code and phone number for the contact in the Postal Code and Phone Number fields.
8. Click on the the type of certificate that you want to purchase from the Certificate Type drop-down list.
The current price list is available underneath the form.
9. Click on the Standard Trust Logo and/or Credit Card Trust Logo tick boxes, as required.

10. Click on the radio button for the number of servers you want and the number of years for which you want
the certificate to be valid.
11. Enter the password for the certificate owner in the Challenge Password field.

Figure 2.120: Purchasing an SSL certificate

91


13. Copy the RSA Private Key and Certificate Request values to a separate file for safe keeping.

15. Pay the online vendor for the certificate that you have ordered.

2.22.4 Listing SSL hosts
You can display a list of all the SSL hosts installed on your server at any time.
To list SSL hosts:

1. Click on the List SSL Hosts link in the SSL/TLS menu.
2. The list of installed SSL hosts is now displayed.

2.22.5 Deleting a SSL hosts
You can delete an installed SSL host at any time.
To delete a SSL hosts:

1. Click on the Delete a SSL Host link in the SSL/TLS menu.

2. Click on the tick box next to the SSL host that you want to delete and click on the button.

2.22.6 Generating an SSL certificate
You can generate an SSL certificate, consisting of an RSA private key and certificate, for any domain using
WebHost Manager. An SSL (Secure Sockets Layer) certificate is a public key which is verified by a trusted
organization (in this case RSA Data Security, Inc. , a recognized world leader in cryptography and the global
de facto standard for public key cryptography and digital signatures). This will allow viewers of an SSL site to
verify the identity of the web site by its public key.
To generate an SSL certificate:

1. Click on the Generate an SSL certificate and Signing Request link in the SSL/TLS menu.
2. Enter the email address to send the certificate to in the Email Address the Cert will be sent to field.
3. Enter the domain that the domain is being created for in the Host to make cert for field.
4. Enter the administration details of the certificate in the Country, State, City, Company Name, Com-
pany Division, and Email fields.
5. Enter the password for the certificate in the Password field.

92


Figure 2.121: Generating an SSL certificate

2.22.7 Installing an SSL certificate
Once you have generated or received an SSL certificate (refer to page 92 for more information), you can install
the certificate using WebHost Manager. You need both the certificate and key files to install the certificate.
To install an SSL certificate:

1. Click on the Install an SSL Certificate and Setup the Domain link in the SSL/TLS menu.
2. Enter the domain, user name, and IP address for the certificate in the Domain, User, and IP Address
fields.

3. Click on the button to paste the .key and .crt files for the domain into the available display spaces,
if they are currently on your server. Otherwise, copy and paste the .key and .crt files into the available
display areas.
Note: If you generated the certificate using WebHost Manager, the certificate files will be available. Refer
4. Paste the ca bundle for the certificate in the bottom display area, if required.


93


Figure 2.122: Installing an SSL certiﬁcate

94

2.23. RESTART SERVICES CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.23 Restart Services
You can restart any of the available services on the system at any time. You can restart the following services:

• Mail Server (Exim)
• DNS/Name Server (BIND)
• FTP Server (ProFTPd)
• SQL Server (MySQL)

• SSH Server (OpenSSH)
• HTTP/Web Server (Apache)
• POP3 Server (cppop)
• Imap Server (uwimap)
• E-Commerce Server (interchange)

Refer to page 27 if you need to start or stop a service.
To restart a service:

1. Click on the required link in the Restart Services menu. This immediately attempts to restart the service
and displays that service’s status.

95

2.24. SCRIPTS CHAPTER 2. HOW DO I USE WEBHOST MANAGER?

2.24 Scripts
WebHost Manager has a large number of predeﬁned scripts available in the /scripts folder. The available scripts
are as follows:

• adddns – Adds a DNS zone.
• addfpmail – Add frontpage mail exts to all domains without them.
• addnetmaskips – Add the netmask 255.255.255.0 to all ips that have no netmask.
• addpop – Add a Pop Account.
• addservlets – Add JSP support to an account (requires tomcat).
• addstatus – (Internal use never called by user).
• adduser – Add a user to the system.
• adduser.old – (OLD)
• admin – Run WHM Lite.
• apachelimits – Add rlimits to Apache.

• bandwidth – (OLD)
• builddomainaddr – (OLD)
• bupcp – (OLD)
• chcpass – (Internal use).

• checkinterchange – (Internal use).
• checklog – (OLD)
• chownpublichtmls – Change ownership of all users web space to them, which is useful for converting to
suexec. Files owned by nobody are deleted.

• chpass – Change password.
• cleandns – (OLD)
• cleandns8 – Clean up named.conf.
• cleanmd5 – Fix CPAN md5 problems.
• cleanopenwebmail – (OLD)
• conﬁgips – (OLD)
• *.cgi – (INTERNAL)

• *.c – (INTERNAL)
• cpbackup – Backup.
• dialog* – (NOT USED)
• dns setup – (OLD)

• dnstransfer – Only if the server has a DNS master (sync with DNS master).

96


• dotbuffer – (INTERNAL)
• editquota – Change a users quota.
• enablechkservdwebmail – Enable service checking of webmaild.
• exchange* – (INTERNAL)
• finddev – (INTERNAL)
• findhacks – Search for common Trojan Horses.
• findtrojans – Exhaustive Trojan Horse search.
• fixadmin – (OLD)
• fixcartwithsuexec – (INTERNAL) – Can be used to fix a cart with suexec.
• fixcgiwrap – (OLD)
• fixcommonproblems – Attempt to fix the most common problems.
• fixeverything – Common problems and quotas.
• fixfpwml – Fix for .wml errors with frontpage.
• fixheaders – Run if nothing compiles errors with .h files on compile.
• fixhome – (NOT USED) – Unsymlink items.
• fixinterchange – Reinstall interchange Perl modules.
• fixinterchangeperm – fix permissions on a users interchange cart.

• fixipsnm – Same as addnetmask ips, but Perl though.
• fixlibnet – Reinstall Bundle::libnet (Perl).
• fixlocalhostwithphp – Change /etc/hosts to work better with php 4.2.0 + mySQL.
• fixndc – Repair redhat’s broken named.conf on 7.2.

• fixoldlistswithsuexec – Run after enabling suexec on the server to change the urls that Mailman gives
out to ones that don’t give a 500 internal server error.
• fixperl – Symlink /usr/local/bin/perl /usr/bin/perl.
• fixpop – Fix a POP account and reset password.

• fixquotas – Fix quotas.
• fixrelayd – (OLD)
• fixrh72ndckey – (INTERNAL)

• fixsubdomainlogs – Run if subdomain logs don’t show up in CPanel.
• fixsuexeccgiscripts – Fix cgi scripts that are broken after suexec installed.
• fixtrojans – (NOT USED)
• fixvaliases – Fix permisions on valiases.

• fixwebalizer – Repair a Webalizer that has stopped updating.

97


• fixwebmail – (OLD)
• fixwwwdir – (OLD)
• fpbtr – (OLD)
• fpsuexec – (INTERNAL)
• fpsuexec2 – (INTERNAL)
• fpupgrade – (INTERNAL)
• gencrt – Generate a .crt and .csr file.
• gencrt2 – (NOT USED)
• gentomcatlist – (INTERNAL)
• gethomedir – (INTERNAL)
• getpasswd – (INTERNAL)
• getremotecpmove – (INTERNAL)
• grabemails – (INTERNAL)
• grabhttp* – (INTERNAL)
• hackcheck – (INTERNAL)
• hdparmify – Enable dma/irq/32bit hd access, which speeds up ide drives.
• HTTPreq.pm – (INTERNAL)
• icpanel – (OLD)
• initbyteslog – (INTERNAL)
• initfpsuexec – Enable FrontPage suexec support.
• initquotas – Turn on quota support on new drives.
• initsslhttpd – Make sure http starts with ssl.
• initsuexec – Turn on suexec support if suexec is installed.
• installaimicq – (INTERNAL)
• installdbi – Install Bundle::DBD::mysql.
• installipc – (INTERNAL)
• installrmmods – (OLD)
• installspam – Install SpamAssassin.
• installssl – Add a ssl vhost.
• installzendopt* – Install zend optimzer.
• ipcheck – (INTERNAL)
• ipusage – (INTERNAL)
• kernelcheck – (INTERNAL)

98


• killacct – Delete an account.
• killbadrpms – Secuirty script that kills insecure rpms from the server.
• killdns – Delete a DNS zone.
• killndbm - Remove the broken NDBM File module from 7.2.
• killvhost – Delete a vhost.
• listsubdomains – List subdomains.
• mailadmin – (DEAD, OLD)
• mailperm – Fix almost any mail permission problem.
• mailtroubleshoot – Guided mail fix.
• makesecondary – Part of DNS transfer.
• mkquotas – OLD
• mkwwwacctconf – (INTERNAL)
• mysqladduserdb – Create a mySQL databse and user.
• mysqldeluserdb – Delete a mySQL databse and user.
• mysqlinfo – (OLD)
• mysqlpass – Change mysql password.
• newdomains* – (OLD)
• newftpuser – Create a new virtual ftp users.
• newpop – Create a pop account.
• nofsck – Make fsck always use -y
• oopcheck – (INTERNAL)
• park – Park a domain.
• pedquota – (INTERNAL) – Part of editquota (for editting quota).
• phpini – Create a php.ini file.
• pkgacct* – (INTERNAL)
• popftpuse – (OLD)
• portsup – (FREEBSD BETA)
• pscan – (OLD)
• quicksecure – Quickly kill useless services.
• rasetup – (OLD)
• rawchpass – (INTERNAL)
• rebuildcpusers – Rebuild /var/cpanel/users.
• rebuildhttpdconffromproftpdconf – Rebuild httpd.conf from the proftpd.conf file.

99


• rebuildinterchangecfg – Used after moving a domain with Interchange to the server.
• rebuildippool – (INTERNAL)
• rebuildnamedconf – Restore named.conf from ﬁles in /var/named.
• rebuildproftpd – Restore proftpd.conf from httpd.conf.
• remdefssl – Remove default ssl vhost.
• resetquotas – Change quotas to what they should be .
• restartsrv – Restart a service.
• reswhostmgr – Restart whostmgr.
• rhlupdate – (OLD)
• rpmup – Upgrade redhat/mandrake errata/security.
• runlogsnow – (OLD)
• runweblogs – Run analog/webalizer/etc. for a user.
• ruserssscpcmd – (INTERNAL)
• scpcmd – (INTERNAL)
• searchreplace – (NOT USED)
• secureit – Remove unnecessary suid binaries.
• setupfp – Install FrontPage 3 on an account.
• setupfp4 – Install FrontPage 4 (2000) installer on an account
• setupfp5 – Install FrontPage 5 (2002) installer on an account
• simpleps – Display the process list.
• simplesshcmd – (INTERNAL)
• snarf – (INTERNAL)
• sscpcmd – (INTERNAL)
• ssh* – (INTERNAL)
• suspendacct – Suspend an account.
• sysup – update CPanel rpms.
• telentcrt – (OLD)
• testinf – (OLD)
• trustme – (INTERNAL)
• uf – (OLD)
• unlimitnamed – Install the latest version of bind patched to support greater than 512 ips on the server.
• unblockip – Unblock an ip blocked by portsentry.
• unpktacct – (INTERNAL)

100


• unsetupfp4 – Remove FrontPage 4 or 5 from an account.
• unslavenamedconf – If the user accidentally sets a DNS master as local server, this will repair named.conf
after the loop.

• unsuspendacct – Unsuspend an account.
• upcp – Update CPanel.
• updated – Update /scripts.
• updatedomainips – (INTERNAL)
• updatenow – Update /scripts NOW.
• updateuserdomains – (INTERNAL)
• userps – (OLD)
• userss* – (INTERNAL)
• verify – (OLD)
• whoowns – Find out who owns a domain.
• whostmgrkey – (OLD)
• wwwacct – Create an account.
• x* – (OLD)
• zoneexists – (INTERNAL)

101

CHAPTER 3. FAQ

3 FAQ
Q: I’m having server problems but the problem is not listed below. What should I do? A: There are two options.

1. You can search the Knowledgebase in WebHost Manager. The is explained in the support part of this
manual.
2. You can search the CPanel forums – http://support.cpanel.net/

Q: How do I login to Cpanel from a non-GUI?
A: Do the following:

1. /usr/local/cpanel startup
2. /etc/rc.d/init.d/cpanel3 restart – This will restart CPanel.

Q: I just got another server, what do I do?
A: If you would like to make your two servers work together, you will need to establish a trust relationship with
your primary nameserver – refer to page 64 for more information. If you would like to transfer your old server’s
files to your new server – refer to page 54 for more information.
Q: Proftp will not start it says, ’unable to determine the ip address of mydomainhere.com’. What do I do?
A: You need to change your hostname to a FQDN (Fully Qualified Domain Name). A FQDN has a host name,
and a domain name which includes a top-level domain, e.g. www.sub.domain.com.

1. #pico /etc/sysconfig/network
2. Type hostname www.sub.domain.com
3. Save changes and quit pico.
4. Now, add a DNS Zone for yourdomain.com in WebHost Manager.
5. Add an entry to /etc/hosts for your hostname.

Q: I have a CPanel license but when I login it says ’Invalid Lisc File’. What’s wrong?
A: There are a couple of possibilities. The date on your server could be improperly synced, your main ip could
have changed, or your files could have been corrupted.

1. First, try to resync your server’s date:
#rdate -s rdate.darkorb.net
2. If that does not work, try to update your CPanel license file:
#/usr/local/cpanel/cpkeyclt
3. If these do not work contact your distributor so they can update your license

Q: My install keeps saying ”waiting for updated to finish”. What should I do?

1. Open another Terminal window and run as root:
#rsync -av rsync://ftp.cpanel.net/scripts /scripts
2. /etc/rc.d/init.d/cpanel3 restart – This will restart CPanel.

102

CHAPTER 3. FAQ

Q: What types of traffic does the Bandwidth monitor show?
A: The bandwidth monitor watches http, ftp, and pop traffic.
Q: I’ve added accounts in WebHost Manager that aren’t showing up. What’s wrong?
A: Your domain database has not been updated, you need to run:
#/scripts/updateuserdomains
Q: What does Initial Nameserver Setup do?
A: This starts the name and adds it to the list of daemons to be checked.
Q: What should I do about partitioning my drive? What sizes do I need?
A: Refer to page 12 for more information.
Q: How do I upgrade using buildapache.sea?

1. SSH into your server.
2. SU and log in as root.
3. #wget http://layer1.cpanel.net/buildapache.sea
4. #chmod 755 buildapache.sea
5. #./buildapache.sea
6. Wait for the installer to complete.

7. Cleanup after the install with:
#rm -Rf buildapache/
#rm buildapache.sea

Q: How can I use Cpanel in a non-graphical environment?

1. #/sbin/chkconfig –add xfs
2. #/sbin/service xfs start

Q: Neomail keeps returning no MD5.so in @INC. What do I do?
A: #/scripts/cleanmd5
Q: How can I fix problems with mail that result from incorrect permissions?
A: #/scripts/mailperm
Q: I’m trying to add FrontPage extensions, or a new account, and I get sd(8,10) write failure, user limit block
reached. What do I do?
A: #/scripts/fixquotas
Q: What can fix many common problems?
A: #/scripts/fixcommonproblems
Q: I keep getting a 500 error when trying to use Mailman. What is wrong?
A: Your hostname is not being sent with your e-mail. Do the following:

1. #/scripts/fixoldlistswithsuexec

103

CHAPTER 3. FAQ

2. If that doesn’t work, try:
#/scripts/fixmailmanwithsuexec
#pico /usr/local/apache/conf/httpd.conf – move the last vhost to the first vhost in the file.

Q: What do I do when Mailman wants UID 99 but is getting -1?
A: #/scripts/upcp
Q: My subdomain logs are not being processed. What do I do?

1. #rm -f ˜username/tmp/lastrun
2. #killall -9 cpanellogd
3. #/usr/local/cpanel/cpanellogd

Q: How do I enable FrontPage on port 443 with ssl?

1. /usr/local/frontpage/version5.0/bin/owsadm.exe -o install -p 443 -m
2. $domain -t apache-fp -xuser $user -xgroup $group -servconf
3. ”/etc/httpd/conf/httpd.conf”

Q: Neomail complains of no MD5.so in @INC – what do I do?

1. Rebuild perl using installer from http://cpanel.net/
2. Just running /scripst/cleanmd5 should do it.

Q: When adding FrontPage, I get sd(8,10) write failure, user limit block reached. What do I do?
Run /scripts/fixquotas
Q: How do I fix general mail problems related to permissions?
A: /scripts/mailperm
Q: How do I fix the most common problems?
A: /scripts/fixcommonproblems
Q: How do I fix cgi scripts that are returning a 500 error because of permissions?

1. /scripts/fixsuexeccgiscripts
2. read /usr/local/apache/logs/suexec log for Mailman 500 Error.
3. /scripts/fixmailmanwithsuexec
4. edit /usr/local/apache/conf/htpd.conf and move the vhost it creates (almost always the last one in the file)
to be the first vhost.
5. Restart Apache: /etc/rc.d/init.d/httpd restart
6. run /scripts/fixoldlistswithsuexec

104

CHAPTER 3. FAQ

Q: What do I do when Mailman wants UID 99 when getting -1?

1. edit httpd.conf
2. Make sure Group is set to nobody.
3. run /scripts/upcp – that should rebuild mailman with the correct UID/GID.

/scripts/upcp should now detect this and fix it for you automatically.

1. Turn on SYN Cookies if built into the kernel.
2. echo 1 ¿/proc/sys/net/ipv4/tcp syncookies – at boot time after the /proc file system has been mounted.

Q: How do I troubleshoot Perl scripts?

1. edit perl / cgi script - at top of file #!/usr/bin/perl
2. Use CGI::Carp qw(fatalsToBrowser); – errors should be redirected to browser rather then getting a 500
error.
3. Also, check if the script runs on the command line – perl -w ./scriptname.cgi – and see if it gives you errors.

Q: What do I do if subdomain logs are not getting processed?

1. rm -f ˜username/tmp/lastrun
2. killall -9 cpanellogd
3. /usr/local/cpanel/cpanellogd

Q: How do I stop a crontab?
Add - ¿/dev/null 2¿&1 – after the entry in the crontab.
Q: What do I do when MySQL gives error of access denied for root@localhost?
A: Make sure root pass is in /root/.my.cnf , this is usually the first root password the box was given when CPanel
was installed.
Q: How do I set the /etc/my.cnf file for sites with vbb forums that don’t close connections, thus spawning 500
mysqld’s and hogging all the RAM?
A: Do the following to mysqld:

• set-variable = max connections=1500
• set-variable = max user connections=200
• set-variable = wait timeout=200
• set-variable = interactive timeout=800

Q: What do I do if SpamAssassin is taking up a lot of memory and CPU?
A: The chances are the dbm database has gotten corrupted. Try this:

105

CHAPTER 3. FAQ

1. Find out what user it’s running as with ’top’.
2. cd /home/user/
3. rm -rf .spamassasin
4. Then mail them a couple of times to see if it fixes the problem.

Q: What do I do if buildapache.sea bombs out with a lot of nasty looking errors?

1. Find out the version (cat /etc/redhat-release).
2. Find a server running the same version that works.
3. tar xzvf bits.tgz /usr/include/bits
4. Copy that to the broken server.
5. Backup /usr/include/bits somewhere.
6. tar xzvf bits.tgz from /

Q: What do I do when a Guestbook is not showing anything, I get a blank page when trying to view, and no
errors when submitting?
chown nobody /home/username/.guestbook
Make sure ’nobody’ can write to it.
Q: What do I do when all the Perl/CGI scripts that are not running as root (including Interchange) get the error
”getgrgid: invalid groupid XXXXX”? From Apache’s error log ...
[Tue Mar 26 09:13:16 2002] [error] [client x.x.x.x] (2)No such file or directory: getgrgid: invalid groupid 32015
[Tue Mar 26 09:13:16 2002] [error] (2)No such file or directory: exec of /home/username/public html/utility.cgi
failed
[Tue Mar 26 09:13:16 2002] [error] [client x.x.x.x] Premature end of script headers:
/home/username/public html/script.cgi
chmod 644 /etc/group
If that doesn’t fix it, check permissions on the passwd file and shadow file as well just for good measure.
Q: What are the default locations for Mailman, exim config, exim log, or the exim reject log?
A: The locations are:

• Mailman lists = /usr/local/cpanel/3rdparty/mailman/lists/
• Exim Config = /etc/exim.conf

• Exim Log = /var/log/exim mainlog
• Exim Reject Log = /var/log/exim rejectlog

Q: What do I do when setting up a trust relationship and I get errors about possible security threats and stuff
about SSH/known hosts?
A: Most likely the master server has changed it’s ssl info. The easiest way to remedy this is:

106

3.1. USING THE CPANEL::ACCOUNTING PERL MODULE CHAPTER 3. FAQ

1. cd /etc/
2. rm -rf .ssh

Then try setting up the trust relationship again.

3.1 Using the Cpanel::Accounting Perl module
The Cpanel::Accounting perl module is designed to give programs that need access to create/remove/modify
accounts an easy way to implement this in their perl program. For security reasons if you are connecting to a
remote server you should set the usessl varible to 1. You must have the Net::SSLeay perl module installed for
this to work.
Cpanel::Accounting supports the following methods:

• new – Create a new Cpanel::Accounting Object.
• showversion – Shows what version of WHM the remote server is running.
• listaccts – Lists currently active accounts.
• listpkgs – Lists packages avalible for creation.

• addpkg – Add a package.
• editpkg – Edit a package.
• createacct – Creates a new account on the server.
• killacct – Terminates an account on the server.

• suspend – Suspends an account on the server.
• unsuspend – Unsuspends an account on the server.

Please refer to the online version of this help for a sample Perl application.

107

3.2. USING THE CPANEL ACCOUNTING PHP MODULE CHAPTER 3. FAQ

3.2 Using the Cpanel Accounting php module
The Cpanel Accounting php module is designed to give programs that need access to create/remove/modify
accounts an easy way to implement this in their php program. For security reasons if you are connecting to a
remote server you should set the usessl argument to 1. You must have the curl+ssl module installed for this to
work.
Cpanel Accounting supports the following methods:

• showversion – Shows what version of WHM the remote server is running.
• listaccts – Lists currently active accounts.
• listpkgs – Lists packages avalible for creation.
• createacct – Creates a new account on the server.
• killacct – Terminates an account on the server.
• suspend – Suspends an account on the server.
• unsuspend – Unsuspends an account on the server.

Please refer to the online version of this help for a sample php application.

108

Index

access host, 70 backups, 36
account configuring, 36
changing ownership, 24 restoring, 37
Account Functions, 41 restoring multiple, 38
account ownership, 24 bandwidth
accounts exceeding, 51
changing ownership, 49 bandwidth usage, 45
creating, 41 limiting, 45
displaying all, 49 viewing, 45
downgrading, 44
listing, 41 certificates
listing suspended, 46 change SSL, 90
modifying, 43 generating SSL, 92
rearranging, 44 installing SSL, 91, 93
showing reseller, 50 purchasing SSL, 91
suspending, 46 CGI
suspending reseller, 22 fix insecure permissions, 51
terminating, 43 changing
transferring multiple, 55 account ownership, 24, 49
transferring one, 54 hostname, 18
transferring one with password, 54 IP address, 52
unsuspending, 46 MySQL user password, 72
unsuspending bandwidth exceeders, 51 SSL certificate, 90
unsuspending reseller, 22 WebHost Manager theme, 56
upgrading, 44 cleanup DNS, 67
adding cloning
CPanel theme, 56 CPanel theme, 59
DNS zone, 65 language file, 33
IP address, 74 configuring
packages, 61 backups, 36
reseller privileges, 20 copying
resetting MySQL access host, 70 language file, 33
user to Wheel group, 28 CPanel
WebHost Manager theme, 57 adding theme, 56
altering cloning theme, 59
FTP settings, 17 deleting theme, 59
settings, 16 upgrading, 87
anonymous FTP, 17 CPanel 5, 86
Apache creating
modify memory usage, 80 account, 41
Apache log, 50
downloading, 50 databases
assigning repairing MySQL, 71
IP for new nameserver, 24 deleting
CPanel theme, 59

109

INDEX INDEX

DNS zone, 66 viewing statistics, 83
IP address, 74 enabling
packages, 62 anonymous FTP, 17
SSL hosts, 92 demo mode, 49
demo mode, 49 nameservers, 25
disabling, 49 Outlook Express autoconfiguration, 88
enabling, 49 quotas, 25
disabling shell access, 52
anonymous FTP, 17 shell fork bomb protection, 29
demo mode, 49 SuExec, 28
Outlook Express autoconfiguration, 88 traceroute, 25
shell access, 52 establishing
shell fork bomb protection, 29 trust relationship, 67
SuExec, 28
traceroute, 25 FAQ, 102
disk drives, 77 fixing
formatting, 77 insecure CGI permissions, 51
mounting, 77 formatting hard drive, 77
optimizing EIDE, 77 forwarding
displaying domains, 68
all accounts, 49 system mail, 26
server information, 40 Frontpage extensions, 69
skeleton directory, 42 installing, 69
DNS installing mail, 69
adding zone, 65 uninstalling, 69
cleanup, 67 FTP
deleting zone, 66 altering settings, 17
editing zone, 66 synchronize passwords, 89
synchronize records, 68 tweaking settings, 17
DNS Functions, 64 FTP settings, 17
DNS zone, 65
domains generating
forwarding, 68 keys, 29
listing parked, 64 SSL certificate, 92
parking, 64 hostname, 18
pointing, 64 changing, 18
unparking, 64 httpd.conf, 38
downgrading
account, 44 insecure CGI permissions, 51
downloading installing
language file, 34 Frontpage extensions, 69
raw Apache log, 50 Frontpage mail extensions, 69
themeball, 59 Perl module, 79
RPM, 78
editing SSL certificate, 91, 93
DNS zone, 66 theme, 58
language file, 33 installing WebHost Manager, 12
MX entry, 67 Interactive Knowledgebase, 31
packages, 62 using, 31
reseller privileges, 21 IP address
reserved IP addresses, 75 changing, 52
server setup, 15 IP addresses, 74
email, 82 adding, 74
all users, 48 deleting, 74

110

INDEX INDEX

editing reserved, 75 MX entry, 67
rebuilding pool, 75 editing, 67
showing, 74 MySQL, 70
showing reserved, 75 adding access host, 70
showing usage, 75 repairing database, 71
IP delegation, 23 resetting root password, 70
IP Functions, 74 setting root password, 25
setting up remote server, 71
keys show processing, 72
generating remote access, 29
remote access, 29 named.conf, 38
viewing remote access, 29 nameservers, 25
killing background processes, 84 assigning IP, 24
enabling, 25
language file, 33 establishing trust relationship, 67
cloning, 33 news, 14
copying, 33 modifying, 86
downloading, 34
editing, 33 optimizing EIDE hard drives, 77
modifying other programs, 34 Outlook Express
uploading, 34 disable autoconfiguration, 88
Languages, 33 enable autoconfiguration, 88
limiting
bandwidth usage, 45 packages
listing adding, 61
account, 41 deleting, 62
installed themes, 57 editing, 62
parked domains, 64 parking
SSL hosts, 92 domain, 64
subdomains, 52 passwords
suspended accounts, 46 change MySQL user, 72
logging on, 14 modifying account, 48
resetting Mailman, 87
mail resetting MySQL root, 70
forwarding system, 26 setting MySQL root, 25
managing queue, 82 setting server root, 26
troubleshooter, 82 synchronize FTP, 89
Mail Exchange Record, 67 Perl
Mailman installing module, 79
resetting password, 87 permissions
managing fix insecure CGI, 51
mail queue, 82 pointing
reseller’s IP delegation, 23 domain, 64
reseller’s shared IP address, 24 preferences
memory hog protection, 29 update, 18
memory usage, 80 privileges
modifying adding reseller, 20
account, 43 editing reseller, 21
account password, 48 removing reseller, 20
account quota, 47 processes
news, 86 kill background, 84
resolver configuration file, 19 MySQL, 72
Suspended Account page, 47 proftpd.conf, 38
mounting hard drive, 77 purchasing

111

INDEX INDEX

SSL certificate, 91 quick security scan, 80

quick security scan, 80 security, 80
quotas, 25 modify memory usage, 80
enabling, 25 quick scan, 80
modifying account, 47 scan for Trojan Horses, 80
server setup, 15
raw Apache log, 50 Server Status, 40
rearranging servers
account, 44 displaying information, 40
rebooting editing setup, 15
forceful, 39 rebooting, 39
graceful, 39 setting root password, 26
server, 39 setting time, 19
rebuilding Service Manager, 27
RPM, 78 services
rebuilding IP address pool, 75 restarting, 95
Red Hat Package Manager, 78 starting, 27
remote access keys, 29 stopping, 27
remote MySQL server, 71 setting
removing default WebHost Manager theme, 57
reseller privileges, 20 MySQL root password, 25
user from Wheel group, 29 server root password, 26
repairing server time, 19
MySQL database, 71 setting up
Reseller Center, 20 remote MySQL server, 71
reseller’s IP delegation, 23 settings, 16
reseller’s shared IP address, 24 shared IP address, 24
resellers shell access
adding privileges, 20 disable autoconfiguration, 52
editing privileges, 21 enable auto configuration, 52
managing IP delegation, 23 shell fork bomb protection, 29
managing shared IP address, 24 disabling, 29
removing privileges, 20 enabling, 29
showing accounts, 50 shopping cart, 86
statistics, 22 showing
suspending account, 22 IP address, 74
terminating, 23 IP address usage, 75
unsuspending account, 22 MySQL processes, 72
resetting reseller accounts, 50
Mailman password, 87 reserved IP addresses, 75
shopping cart, 86 skeleton directory, 42
resolv.conf, 19 displaying, 42
resolver configuration file, 19 software, 78
restarting updating, 79
services, 95 SSL, 90
restoring change certificate, 90
backups, 37 generate certificate, 91, 92
multiple backups, 38 install certificate, 93
rolling back files, 38 purchase certificate, 91
RPM SSL certificate, 92
installing, 78 SSL hosts
rebuilding, 78 deleting, 92
running listing, 92

112

INDEX INDEX

SSL Manager, 90 FTP settings, 17
starting settings, 16
services, 27
statistics uninstalling
viewing email, 83 Frontpage extensions, 69
viewing resellers, 22 unparking
stopping domain, 64
services, 27 unsuspending
su command, 28 account, 46
subdomains accounts exceed bandwidth, 51
listing, 52 reseller account, 22
SuExec, 28 update preferences, 18
disabling, 28 updating
enabling, 28 server software, 79
Support, 31 system software, 79
Suspended Account page, 47 upgrading
modifying, 47 account, 44
suspending CPanel, 87
account, 46 uploading
reseller account, 22 language ﬁle, 34
synchronizing users
DNS records, 68 mailing all2, 48
passwords, 89 using
system Interactive Knowledgebase, 31
forwarding mail, 26 mail troubleshooter, 82
system health, 84 SSL Manager, 90

terminating viewing
account, 43 bandwidth usage, 45
reseller’s account, 23 email statistics, 83
themeballs, 59 keys, 29
downloading, 59 reseller statistics, 22
Themes, 56
themes WebHost Manager, 10
adding CPanel, 56 adding theme, 57
adding WebHost Manager, 57 changing theme, 56
changing WebHost Manager, 56 how to use, 11
cloning CPanel, 59 installing, 12
deleting CPanel, 59 logging on, 14
installing, 58 logging on ﬁrst time, 13
listing installed, 57 news, 14
setting default WebHost Manager, 57 setting default theme, 57
traceroute, 25 Wheel group, 28
disabling, 25 adding user, 28
enabling, 25 removing user, 29
transferring
multiple account, 55
one account, 54
one account with password, 54
Transfers, 54
Trojan Horses, 80
trust relationship, 67
establishing, 67
tweaking

113

WebHost Manager 1.01 User Guide

More Related Content

What's hot (17)

Viewers also liked (6)

Similar to WebHost Manager 1.01 User Guide (20)

More from webhostingguy (20)

WebHost Manager 1.01 User Guide