Weekly report 8
0 likes188 views
Weekly progress: The student learned programming with AVR Studio 4 and worked on writing code to control a 4-digit 7-segment display, sending each digit's data sequentially at 25 times per second. An experiment to read data from an IC DS1307 real-time clock was unsuccessful. Engineering analysis found that the circuit was simplified but programming was difficult. The next week's job is to write the microcontroller programming.
![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] March 22, 2012
Name-Surname Nattapon Kumpaing
Student ID. 53211811
Group Name Conthai
Engineering
Team Members
Golf(04),champ(19),Bank(30),June(31)
Product Design
Team Members
P’Duk-dik P’Friend P’Ake P’Elle
Weekly Progress
I learned Programming by AVR Studio 4.
Learning to write a programming Control 4-digit multiplexed seven-segment display. Work will then
send them one by one to one digit. It will be one digit 7 segment. However, the data must be transmitted at a
speed about 25 times in one second. And experimental programming reads the data from the ic ds 1307
(Real-Time Clock), But without success.
Figure 1. Display inc.2. Figure 2. The experimental circuit.
Engineering Analysis
Strong Point
-The circuit is reduced.
Week Point
- Hard programming.
Next Week Job
- I must write micro controller
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](https://image.slidesharecdn.com/weeklyreport8-120327235329-phpapp01/85/Weekly-report-8-1-320.jpg)
Weekly report 8
- 1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] March 22, 2012 Name-Surname Nattapon Kumpaing Student ID. 53211811 Group Name Conthai Engineering Team Members Golf(04),champ(19),Bank(30),June(31) Product Design Team Members P’Duk-dik P’Friend P’Ake P’Elle Weekly Progress I learned Programming by AVR Studio 4. Learning to write a programming Control 4-digit multiplexed seven-segment display. Work will then send them one by one to one digit. It will be one digit 7 segment. However, the data must be transmitted at a speed about 25 times in one second. And experimental programming reads the data from the ic ds 1307 (Real-Time Clock), But without success. Figure 1. Display inc.2. Figure 2. The experimental circuit. Engineering Analysis Strong Point -The circuit is reduced. Week Point - Hard programming. Next Week Job - I must write micro controller Department of Control System and Instrumentation Engineering KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI