Welded Joint (Theory)
Download as PPT, PDF1 like1,089 views
This document summarizes information about welded joints from an active learning assignment. It includes: 1) An introduction to welded joints, defining welding as a process of joining metallic parts through heating and fusion. 2) Advantages of welded joints like higher efficiency, lighter weight, and flexibility in welding procedures. 3) Limitations of welded joints including poorer vibration resistance and inability to join different materials. Examples of welded machine components are also given. 4) An overview of different types of welded joints like butt joints, fillet welds, corner welds, and T-welds.
Welded Joint (Theory)
- 1. Gandhinagar Institute OF Technology(012) Subject:- MDIT(2141907) Active Learning Assignment Topic Name:- Welded Joint(Theory) Branch:- Mechanical B-1 Prepared By:- Jani Parth U.(150120119051) Guided By:- Prof.Manthan Upadhyay
- 2. Content I. Introduction II. Advantages Of Welded Joints III. Limitations and example IV. Classification of welded joints V. About Different Type Of Weld Joints
- 3. I. Introduction Weld Joint Is Created By Process Of Welding What Is Welding? A Welding Is Process Of Joining Two Metallic Parts Together By Heating With The Use Of Application Of Pressure And Fusion. What Is Use OF Weld Of Joints? Welded Joints Can Be Used As An Alternative To Riveted Joints. While Welded Structures Can Be Used As An Alternative To Casting Or Forging.
- 4. II. Advantages OF Welded Joints Compared To Other Type Of Joints, The Welded Joint Has Higher Efficiency. An Efficiency > 95 % Is Easily Possible. Since The Added Material Is Minimum, The Joint Has Lighter Weight. Welded Joints Have Smooth Appearances. Due To Flexibility In The Welding Procedure, Alteration And Addition Are Possible. It Is Less Expensive. Forming A Joint In Difficult Locations Is Possible Through Welding.
- 5. III. Limitations And Example Limitations Welding Component Are Much Poor In Vibration. Welding Is Not Use In Different Type Of Material. Example Welding Suitable For Joining Components In Various Machines And Structures. Some Typically Welded Machine Components Are Listed Below. 1.Flanges Welded To Shafts And Axles. 2.Heavy Hydraulic Turbine Shafts. 3.Large Gears , Pulleys Flywheels 4.Machine Frames And Bases
- 6. IV. Classification of welded joints
- 7. V. About Different Type Of Weld 1. Butt Joints:- It Is Obtained By Placing Plates To Be Joined By Side With Their Edge. • Square Butt Weld If the thickness of the plates is less than 5mm,so edges of the plates do not bevelling, Then We Use S.B.W • Single V-butt or U-butt Weld If the thickness of plates is between 5mm and 12.5mm,so it is necessary to bevel, Then We Use S.V-B.W OR S.U-B.W
- 8. Double V-butt Or Double U-butt Weld: If The Thickness Of The Plates Is More Than 12.5 MM ,It Is Necessary To Bevel And Weld The Plates From Both The Sides. Double V-butt Weld Double U-butt Weld Single U-butt Weld
- 9. Fillet or lap weld:-it is obtained by over lapping the two plates It Is Classified Into Two Type 1.Parallel Fillet Weld If The Load Axis Is Parallel To The Axis Of The Fillet 2.Transverse Fillet Weld If The Load Is Perpendicular To The Axis Of The Fillet 1.Single Or Double Transverse Fillet Weld 2.Parallel Fillet Weld
- 10. Other Type Of Weld:- This Is Classified Into 3 Types: 1.Corner Weld 2.Edge Weld 3.T-weld
- 11. VI. Real life use of welds