What's new in Femap 11.3 • FEA Analisten Stream
0 likes232 views
Femap 11.3 introduces significant enhancements in user interface, modeling, meshing, analysis, and post-processing features. Key updates include a new draw/erase toolbar, interactive mesh refinement tools, and improvements in quad meshing and contour plots. The version emphasizes user innovation and adapting to new functionalities for improved modeling efficiency.
What's new in Femap 11.3 • FEA Analisten Stream
- 1. Femap 11.3 What’s New? Part I 22-9-2016
- 2. WHAT’S NEW IN FEMAP 11.3 Rob ter Brugge
- 4. • Waarom ‘bij blijven’ met de software die je gebruikt? • Waarom zou gevestigde software als Femap blijven ontwikkelen? Waarom ‘What’s New sessie?
- 5. Workflow issues Enginia GTAC Femap Development New version “Innovatie werkwijze kan alleen door bij te blijven.” Innovatie Femap gebruik Siemens PLM Software Industry
- 6. Deel 1: • User interface • View • Modelling Inhoud Deel 2: • Meshing • Analysis and Results • Post-processing
- 7. USER INTERFACE What’s New in Femap 11.3 Deel 1: • User interface • View • Modelling Deel 2: • Meshing • Analysis and Results • Post-processing
- 8. Interface, toolbars Default View Simple Toolbar Draw/Erase toolbar User Tools
- 9. Intelligent Entity Availability Only Properties which are appropriate for current Element type are available
- 10. • Beam property • Cross section information • Send to clipboard • Compute all properties User Interface
- 11. • New toolbar for draw/erase • Fast access to mesh and geometry on/off • Choose entities to draw or erase • Toggle back and forth User interface
- 12. Demo Draw / Erase toolbar
- 13. User interface Modify, Renumber, All… Renumber All Entities
- 14. • New connection editor • Easier management and access to connections • Direct editing • Sorting & Filters User interface
- 15. VIEW What’s New in Femap 11.3 Deel 1: • User interface • View • Modelling Deel 2: • Meshing • Analysis and Results • Post-processing
- 16. Roll Thru (Through…) • ‘In het model’ kunnen kijken, zonder eerst iets uit te zetten. • Instellen Shift+Alt • Toggle met andere commando’s • Werkt icm 3D controller View, Roll Thru
- 17. New method for front picking • Turn on/off in File / Preferences / Graphics • If an entity is not represented by a pixel, it will not be picked • Works in single pick, box, circle, polygon, etc. Pick visible
- 18. • Rotate about View Center = Default • Rotate about Coordinate system • Rotate around Cursor location • Zoom arount Cursor location Rotate & Zoom
- 19. Demo Rotate, Zoom, Roll Thru
- 20. • View Simple Default • Show/Hide individual Elements • Double click MMB/Wheel to Autoscale (Fit) General enhancements
- 21. MODELING What’s New in Femap 11.3 Deel 1: • User interface • View • Modelling Deel 2: • Meshing • Analysis and Results • Post-processing
- 22. • New Element Type: Spring/Damper & DOF Spring to ground Spring to ground
- 23. Example Spring to Ground LxBxH= 1500 x 1250 x 1000 mm Kokers 80 x 80 x 4 mm • Frame supported in Y- direction, loaded with gravity. • Constraint by Spring/Damper • No extra nodes needed
- 24. Spring to ground (2) • Analysis without Warning • Small reactions at springs
- 25. • Nonzero constraints • Combineert enforced displacement met een constraint Modeling
- 26. MESHING What’s New in Femap 11.3 Deel 1: • User interface • View • Modelling Deel 2: • Meshing • Analysis and Results • Post-processing
- 27. Interactive update of shell/line mesh Interactive Mesh Refinement
- 28. • Elementen stuk voor stuk aanklikken? • Kans op verlies van eigenschappen, belastingen, randvoorwaarden? Interactive Mesh Refinement (2) Interactive Mesh Refinement: • Auto transition • Shrink/grow selection • Drag selection • Loads/constraints propagated automatically
- 30. New smoothing algorithm for highly curved surfaces Mesh Smoothing Improvements
- 31. Max Quads • Goal: all quad mesh through triangle removal • Will allow triangles when required • With an odd number of edges there will always be one triangle Quad Meshing Improvements
- 32. Example: default mesh contains 39 triangles – with Max Quads it’s just 1 Quad Meshing Improvements Default mesh Max Quads mesh
- 33. • Internal element growth now available with quad meshes • Max Quad combined with Quad Layers provides maximum mesh customization and flexibility >> Quad Meshing Improvements
- 35. ANALYSIS & RESULTS What’s New in Femap 11.3 Deel 1: • User interface • View • Modelling Deel 2: • Meshing • Analysis and Results • Post-processing
- 36. • Use active load/constraint set Analysis and Results
- 37. • Solver tab preferences Analysis and Results
- 38. • Advanced Nonlinear memory setting Analysis and Results
- 39. POST PROCESSING What’s New in Femap 11.3 Deel 1: • User interface • View • Modelling Deel 2: • Meshing • Analysis and Results • Post-processing
- 40. • Quick plots > • Select per study • Scale override Charting
- 41. • Contour Vector plots have been completely overhauled for v11.3 and have been renamed Contour Arrows Contour Arrows
- 42. Contour Arrows Plate principals Plate membrane Beam axial / shear
- 44. • Glue & contact forces Freebody
- 45. • Defaults in Preferences Freebody
- 46. • Default displaying only active part of Post Processing Toolbox • Max/Min in Post Titles • Legend: Reverse order • Export only Results from entities in active group General Enhancements
- 47. + gemak en snelheid van modelopbouw + Weergave model + mesh kwaliteit + Mogelijkheden Post processing Veel nieuwe functies en toolbars, gebruiker moet zich dit eigen maken. Femap 11.3
- 48. Workflow issues Enginia GTAC Femap Development New version “Innovatie werkwijze kan alleen door bij te blijven.” Innovatie Femap gebruik Siemens PLM Software
- 49. Nieuwe versie leren • Newfeat.pdf bij installatie files. • Siemens website
- 51. • Bekijk de Newfeat.pdf, geeft een goed beeld van wat er vernieuwd is. • Neem de tijd om wat nieuwe functionaliteiten met simpel model te testen. • Dwing jezelf nieuwe functies te gebruiken en geef ze een kans. • Kies na testen wat voor jou werkt. Nieuwe versie
- 52. • A modeling environment that’s dedicated to FEA • The in-depth, detailed functionality required to accurately model real-world parts and assemblies • Customer driven features and functionality Femap direction
- 53. • Ga mee met de ontwikkeling van de software • Innoveer door nieuwe functionaliteit te benutten. Tot Slot
- 54. Aan de slag! Doubleclick to start innovation Bedankt voor jullie aandacht!