Working Safely while saving time & cost
0 likes231 views
The document discusses optimizing foundation projects by addressing four key factors: 1) Optimising piling speed for different drilling depths and soil strata. 2) Piling fast and cost effectively. 3) Choosing the most cost effective deep shoring system. 4) Building basements waterproof while minimizing dewatering. It provides information on different piling and foundation techniques and emphasizes the importance of choosing the right drilling and cutting tools to pile fast and cost effectively depending on the soil strata.
Working Safely while saving time & cost
- 1. 10/29/14 1 Ηοw important to you is working safely, whilst saving 6me & cost on your founda6ons projects? 4 key factors to consider for your next founda7ons project: 1. How do you op7mise piling speed for differing drilling depths & strata? 2. How do you pile fast & cost effec7vely? 3. How do you choose the most cost effec7ve deep shoring system? 4. How do you build basements waterproof minimising de-‐watering? Total Founda7on Solu7ons FZCO Equipment & Exper7se in Founda7ons & Piling GCC Distributors of CFA Piling Machines Rotary Bored Piling Machines Mini Piling Machines Anchoring, Grou7ng, Soil Inves7ga7on & Water Well Drilling Machines Grou7ng Jet Grou7ng Pumps & Mixers Toa-‐Tone Diaphragm Wall Trenchers Vibratory Hammers & Power Packs PACKINGLIST Hycos B.V.Hycos B.V.Hycos B.V.Hycos B.V. Lissenveld 69, 4941 VL Raamsdonksveer, The Netherlands Tel.: +31 (0) 162 58 23 23 Fax: +31 (0) 162 58 23 29 E-mail: info@hycos.com Internet: www.hycos.com ING bank: 67.00.63.665 IBAN: NL02 ING 0670.0636.65 K.v.K.: 32104181 Op al onze offertes, op alle opdrachten aan ons en op alle met ons gesloten overeenkomsten zijn toepasselijk de METAALUNIEVOORWAARDEN, gedeponeerd ter Griffie van de Rechtbank te Rotterdam, zoals deze luiden volgens de laatstelijk aldaar neergelegde tekst. De leveringsvoorwaarden worden u op verzoek toegezonden. All our quotations, all orders placed with us and all contracts concluded with us are subject to the METAALCONDITIONS, filed with the Register of the District Court of Rotterdam, as stipulated in the latest text lodged with the said Court. The General conditions of Delivery and Payment will be provided at your request. Total Foundation Solutions FZCO Att: Mr. P. Titus LB 11 007, Jafza 11 (PO Box 18458) Jebel Ali Free Zone Dubai UAE Tel : +971 4 880 8460 Fax: +971 4 880 8461 CONCERNS DELIVERY OF: Items:: • Vibratory hammer 52CE / 44CE: 5647 kilo • Beam: 1000 kilo • 2 x 142BH clamp: 1600 kilo • Showstand: 400 kilo • Total weight: 8647 kilo Dimensions (HxLxW): • 52CE / 44CE vibratory hammer: 2134mm x 2485 mm x 530 mm • Showstand / beam / 2 x 142BH clamp: 1500mm x 3300 mm x 2300 mm Cemented Carbide Founda7on Drilling Tools & Wear Parts Work safely, saving 6me & cost on your founda6ons projects How do you op7mise piling speed for differing drilling depths & strata? Driven Piles Sheet Piles Casings Concrete Piles One How do you optimise piling speed for differing drilling depths & strata? Kelly Bored Piles 110m max depth / 4m max dia One How do you op7mise piling speed for differing drilling depths & strata? CFA Piles 41m max depth / 1.5m max dia / very fast & cost efficient One How do you op7mise piling speed for differing drilling depths & strata? Jet Grou7ng Columns / 60m max depth / 3m max dia / Very Cost Effec7ve for large no’s One How do you pile fast & cost effec7vely? Drilling Tools • Use different tools for different strata – Kelly & CFA Soil Strata Kelly Drilling Tools CFA Tools Sand /Clay Double Bodom Bucket Flat Auger Flat head auger Sand Stone/ Rock Double Bodom Bucket Conical Auger Conical head auger Core Barrel Two How do you pile fast & cost effec7vely? Drilling Cueng Tools • Asian prices 50% of European but Asian quality very variable & quality supply is inconsistent • TFS has tested Carbide of 9 Asian vs. 2 Europeans mfrs • In laboratories in USA, UK & Switzerland – Abrasion Wear Resistance to ASTM G133 & E18 – Transverse Rupture Strength to ASTM B406 – Resistance to chipping to ASTM B276 & E3/E407 – Cueng Ability to ASTM G133 • Buy best price for durability Two CSM Instruments SA Rue de la Gare 4 CH-2034 Peseux (Switzerland) T +41 32 557 5600 F +41 32 557 56 10 info@csm-instruments.com www.csm-instruments.com //// Results > Friction Curve The curve below shows an example of the evolution of friction coefficient as a function of time. Friction curve in this application seems not to be a key factor of analysis compared to wear describe in the following chart. Sample S1 - Curves Average friction coefficient : 0.72. The average value of friction coefficient varies between 0.68 and 0.75 and is stable for all samples. > Sample wear and wear track profile of ceramic tile Shank chisels wear has been defined as the lost weight during the test. Shank chisels were weighted before and after testing. The percentage of weight loss has been calculated and is presented in the following chart. Wear of the tile has been measured using the profile of the wear track in 4 places around the wearing track.. Example of wear track on Sample 3: Average on 4 wears tracks taken along track of sample 3: 26’203 um2 Rue de la Gare 4 CH-2034 Peseux (Switzerland) T +41 32 557 5600 F +41 32 557 56 10 info@csm-instruments.com www.csm-instruments.com Test study on Shank Chisel The principle of tribology testing is to simulate to material in contact to investigate friction and wear. Therefore any type of surface modification (painting, coating etc.) will influence the contact. The painting will be removed with acetone. Moreover, norm ASTM G133 that is defined to test these samples represent a Linearly Reciprocating Ball-on-Flat Sliding Wear based on the following drawing. In the current shape, the sample cannot be fixed correctly to test the tip. Usually, the specimen to be investigated is at the bottom part and the ball specimen is provided by CSM Instruments. In your case, the “ball specimen” can be the tip. The flat specimen needs to be defined (materials ideally in contact in the real application) because it isn’t specified in the norm. In order to use the tip as the ball specimen, 2 solutions can be imagined. Either you can provide us the tip without “surrounding” or we will have to cut the shank chisel to keep mainly the tip. In this second solution, we would need you support. Could you provide us the length of the tip or better the drawing with internal dimensions of the tip, so that we would be able to saw the sample on the correct place? Ball Specimen Flat specimen at bottom: to be defined « Surrounding » « Internal dimension of the tip » CSM Instruments SA Rue de la Gare 4 CH-2034 Peseux (Switzerland) T +41 32 557 5600 F +41 32 557 56 10 info@csm-instruments.com www.csm-instruments.com APPENDIX 1 //// TRB Instrument > Picture > Principle of the TRB A flat or a sphere shaped static partner is loaded on to the test sample with a precisely known force. The static partner, (a pin or a ball), is mounted on a stiff lever, designed as a frictionless force transducer. As the disk is rotating, resulting frictional forces acting between the pin and the disk are measured by very small deflections of the lever using an LVDT sensor. Wear coefficients for both the pin and sample are calculated from the volume of material lost during a specific friction run. This simple method facilitates the determination and study of friction and wear behavior of almost every solid state material combination, with varying time, contact pressure, velocity, temperature, humidity, lubrication, etc. How do you pile fast & cost effec7vely? Drilling Cueng Tools Cueng & Abrasion Wear -‐ Tribology Test CSM Instruments SA Rue de la Gare 4 CH-2034 Peseux (Switzerland) T +41 32 557 5600 F +41 32 557 56 10 info@csm-instruments.com www.csm-instruments.com > Sample wear and wear track profile of ceramic tile Shank chisels wear has been defined as the lost weight during the test. Shank chisels were weighted before and after testing. The percentage of weight loss has been calculated and is presented in the following chart. Wear of the tile has been measured using the profile of the wear track in 4 places around the wearing track. Example of wear track: Average on 4 wears tracks taken along track > Chart of results Benchmark 50.351 50.349 0.002 0.004% 21'804 um2 0.726 TFS 62.074 62.072 0.002 0.0032% 22'740 um2 0.731 Two
- 2. 10/29/14 2 How do you choose the most cost effec7ve deep shoring system? Diaphragm Walls for Retaining Three How do you choose the most cost effec7ve deep shoring system? Secant Retaining Walls Three Three How do you choose the most cost effec7ve deep shoring system? Sheet Piles for Retaining How do you choose the most cost effec7ve deep shoring system? H-‐Beam Piles for Retaining Three How do you choose the most cost effec7ve deep shoring system? Soldier Pile Retaining Walls Three How do you choose the most cost effec7ve deep shoring system? Anchoring & Slope Reten7on Three How do you build basements waterproof without de-‐watering? • Tradi7on is to build bodom up – Create walls from surface • Diaphragm, secant or jet grout side walls – Excavate/shore & build up from lowest basement – Excava7on below water table means de-‐watering whilst basement is excavated & bodom slab is cast Four How do you build basements waterproof without de-‐watering? • Jet Grout Bodom Slab from surface • Excavate down with minimal de-‐watering Four Total Founda7on Solu7ons FZCO Solving the GCC’s geotechnical challenges using the global experience, exper7se & equipment of CFA Piling Machines Rotary Bored Piling Machines Mini Piling Machines Anchoring, Grou7ng, Soil Inves7ga7on & Water Well Drilling Machines Grou7ng Jet Grou7ng Pumps & Mixers Toa-‐Tone Diaphragm Wall Trenchers Vibratory Hammers & Power Packs PACKINGLIST Hycos B.V.Hycos B.V.Hycos B.V.Hycos B.V. Lissenveld 69, 4941 VL Raamsdonksveer, The Netherlands Tel.: +31 (0) 162 58 23 23 Fax: +31 (0) 162 58 23 29 E-mail: info@hycos.com Internet: www.hycos.com ING bank: 67.00.63.665 IBAN: NL02 ING 0670.0636.65 K.v.K.: 32104181 Op al onze offertes, op alle opdrachten aan ons en op alle met ons gesloten overeenkomsten zijn toepasselijk de METAALUNIEVOORWAARDEN, gedeponeerd ter Griffie van de Rechtbank te Rotterdam, zoals deze luiden volgens de laatstelijk aldaar neergelegde tekst. De leveringsvoorwaarden worden u op verzoek toegezonden. All our quotations, all orders placed with us and all contracts concluded with us are subject to the METAALCONDITIONS, filed with the Register of the District Court of Rotterdam, as stipulated in the latest text lodged with the said Court. The General conditions of Delivery and Payment will be provided at your request. Total Foundation Solutions FZCO Att: Mr. P. Titus LB 11 007, Jafza 11 (PO Box 18458) Jebel Ali Free Zone Dubai UAE Tel : +971 4 880 8460 Fax: +971 4 880 8461 CONCERNS DELIVERY OF: Items:: • Vibratory hammer 52CE / 44CE: 5647 kilo • Beam: 1000 kilo • 2 x 142BH clamp: 1600 kilo • Showstand: 400 kilo • Total weight: 8647 kilo Dimensions (HxLxW): • 52CE / 44CE vibratory hammer: 2134mm x 2485 mm x 530 mm • Showstand / beam / 2 x 142BH clamp: 1500mm x 3300 mm x 2300 mm Cemented Carbide Founda7on Drilling Tools & Wear Parts Work safely, saving 6me & cost on your founda6ons projects