Yeastar MyPBX-Basic configuration
2 likes2,294 views
The document provides instructions for basic configuration of a Yeastar MyPBX phone system. It includes the following steps: 1. Set up the network connections and configure the MyPBX's IP address, password, date and time. 2. Create extensions for the phones and trunks to handle incoming and outgoing calls. 3. Set inbound and outbound call routes to determine how calls are directed between the trunks and extensions based on numbers and schedules. 4. Configure other settings like voicemail, feature codes and security before backing up the configuration.
![Outbound call control (Cont.)
• Dial pattern
Dial pattern will match from the beginning to the end
We can choose different trunks for different calls
For 110, we can choose PSTN
For Local 7 digits calls, we might choose PRI or GSM
For Long Distance calls, we can choose VoIP trunk
X : Any Digit from 0-9
Z : Any Digit from 1-9
N : Any Digit from 2-9
[12345-9] : Any digits in the brackets (in this example, 1,2,3,4,5,6,7,8,9)
The ‘.’ character will match any remaining digits. For example, 9011. will
match any phone number that starts with 9011, excluding 9011 itself.](https://image.slidesharecdn.com/mypbx-basicconfiguration-160727043528/85/Yeastar-MyPBX-Basic-configuration-45-320.jpg)
Yeastar MyPBX-Basic configuration
- 3. High end enterprise level hybrid IPPBX to facilitate your communication with its rich function, powerful performance, wide interoperability, great customizability, and easy administration. All you need in one device !!! MyPBX Series 3
- 4. SOHO 32 SIP users, 15 concurrent calls, small and comprehensive Standard 100 SIP users, 25 concurrent calls, meet the highest standards 100 SIP users, 25 concurrent calls, professional business solution U100 U200 U300 U5XX 200 SIP users, 50 concurrent calls, all you need in one system 300 SIP users, 50 concurrent calls, more features with least cost 500 SIP users, 80 concurrent calls, powerful solution for enterprises 4
- 5. TEXT HERE Items MyPBX SOHO MyPBX Standard MyPBX U100 MyPBX U200 MyPBX U300 MyPBX U500/U510/U520 Users 32 100 100 200 300 500 Concurrent Calls 15 25 25 50 50 80 VoIP Trunks 32 64 64 64 64 128 IVR 32 32 32 32 32 64 Conference Rooms 16 16 16 16 16 32 Ring Group 16 16 16 16 16 32 Ring Group Members 20 20 25 50 50 60 Paging group 16 16 16 16 16 32 Paging Group Members 20 20 25 50 50 60
- 6. 6
- 7. Port status indicator RJ11 ports USB port for external storage Network Interface LED lights for Corresponding port MyPBX SOHO Up to 4 Analog ports( FXO/FXS) 7
- 8. MyPBX Standard Port status indicator RJ11 ports LED lights for Corresponding port USB port for external storage Network Interface Up to 16 Analog ports( FXO/FXS) Up to 8 GSM/CDMA/WCDMA channels 8
- 9. MyPBX U100 Up to 16 Analog ports( FXO/FXS) Up to 8 GSM/CDMA/WCDMA channels LED lights for Corresponding port Network Interface USB port for external storage Port status indicator RJ11 ports Console port Audio in/ out 9
- 10. MyPBX U200 Up to 16 Analog ports( FXO/FXS) Up to 8 GSM/CDMA/WCDMA channels LED lights for Corresponding port Network Interface USB port for external storage Port status indicator RJ11 ports Console port Audio in/ out 10
- 11. MyPBX U300 2 FXS Ports 1 E1 Port E1 port Console port Audio in/ out Network Interface FXS Ports 11
- 12. MyPBX U500 Up to 16 Analog ports( FXO/FXS) Up to 8 GSM/CDMA/WCDMA channels LED lights for Corresponding port Network Interface USB port for external storage Port status indicator RJ11 ports Console port 12
- 13. MyPBX U510 Up to 16 Analog ports( FXO/FXS) Up to 8 GSM/CDMA/WCDMA channels LED lights for Corresponding port Network Interface USB port for external storage Port status indicator RJ11 ports Console port E1 port 1 E1 Port 13
- 14. MyPBX U520 Up to 16 Analog ports( FXO/FXS) Up to 8 GSM/CDMA/WCDMA channels LED lights for Corresponding port Network Interface USB port for external storage Port status indicator RJ11 ports Console port E1 ports 2 E1 Ports 14
- 15. • Call Transfer • Call Forwarding • Call Pickup • Call Waiting • Call Back • Call Detail Records • Queues • Ring Group • IVR • Call Holding • Music on Hold • Caller ID • Three-way Calling • Voicemail • Speed Dial • Do Not Disturb (DND) • Call Blacklist • BLF Basic Features
- 16. CallParking IPPhonesAutoProvision Conferencing DISA TimeConditionRouting MWI Voicemail to Email T.38 Fax Fax to Email Dial by name PIN Users Distinctive Caller ID One Touch Record Inbound/Outbound Routes DNIS Custom Prompts Interoperable with Lync DID DOD Intercom Distinctive Ringtone Spy Mobility Extension MyPBX Advanced Features
- 17. VoIP Service Provider LAN Primary Server Secondary Server Heartbeat detection VoIP Service Provider LAN Primary Server Secondary Server × HOT STANDBY • Automatic Detection Secondary Server detect the system automatically. Keep track on the system status. • Auto Switch In case of the system broke down, the secondary server will automatically take over as the SIP server. • Fast and flexible installation Simple connection, realize all configuration through web browser. • Email and SMS alert Once system break down happen, a email or SMS will be sent to the adimistrator. Auto Switch
- 19. Basic Configuration System and network settings Configure and Register extensions Configure Trunks Outbound call control Inbound call control Other Basic Settings Security and Backup
- 20. Warming Up Part1. MyPBX Connection Let’s see how to connect Switch, IP phones, router and MyPBX in the same network
- 21. Warming Up (cont.) Part2. Login MyPBX’s web interface 1. Power on your Laptop/PC and log in 2. Set the NIC (Ethernet Port) of your Laptop/PC to match MyPBX’s subnet. Example: Set the NIC IP Address to 192.168.5.XXX and set the Subnet Mask to 255.255.255.0. Turn on the MyPBX and wait until the system initializes properly. This may take a few minutes. Once the RUN LED blinks green, it means the system is working normally. 3. Open your browser and go to http://192.168.5.150
- 22. Warming Up (cont.) Log into web GUI and change a new IP address Factory default IP address: 192.168.5.150 Default username: admin Password: password
- 23. Logic Steps
- 24. System and network settings Step 1 Set a new IP address for MyPBX Step 2 Set a new password for the web GUI Step 3 Set the Date and Time for MyPBX Step 4 Download the system prompts for MyPBX
- 25. System and network setting (Cont.) • Set a new IP address for MyPBX
- 26. System and network setting (Cont.) • Set a new password for the Web GUI
- 27. System and network setting (Cont.) • Date and Time for MyPBX
- 28. System and network setting (Cont.) • Download the system prompts for MyPBX
- 29. Extensions Step 5 Define the extension preferences Step 6 Set up analog and SIP extensions Step 7 Register the extension in IP phone side
- 30. Extensions (Cont.) • Define the extension preferences
- 31. Extensions (Cont.) • Set up analog and SIP extensions
- 32. Extensions (Cont.) • Register the extension in IP phone side manually
- 33. Extensions (Cont.) • Register the extension via phone provisioning Get configurations files from MyPBX
- 34. Trunks Step 8 Configure the trunks well in MyPBX Multiply trunks are supported in MyPBX, you need configure that depends on the trunk you got.
- 35. Trunks (Cont.) • Configure the trunks in MyPBX
- 36. Trunks (Cont.) • Trunks-E1/T1 trunk
- 37. Trunks (Cont.) • Trunks-PSTN trunk
- 38. Trunks (Cont.) • Trunks- GSM trunk
- 39. Trunks (Cont.) • Trunks- VoIP Trunk
- 40. Trunks (Cont.) • Trunks- VoIP trunk
- 41. Trunks (Cont.) • Trunks- Service Provider trunk
- 42. Outbound call control Step 9 Create outbound route which allows you to dial out through trunk we configured.
- 43. Outbound call control (Cont.) • Logic Input numbers—The numbers dialed through phones Match dial Pattern — Special characters have special meanings Transform digits—Copy from input/Remove/Insert digits Send to destinations—Send to different trunks/branch offices phone number Match the Dial pattern Check the next route Transform digits Send to destination trunk Yes No
- 44. Outbound call control (Cont.) • Outbound route page
- 45. Outbound call control (Cont.) • Dial pattern Dial pattern will match from the beginning to the end We can choose different trunks for different calls For 110, we can choose PSTN For Local 7 digits calls, we might choose PRI or GSM For Long Distance calls, we can choose VoIP trunk X : Any Digit from 0-9 Z : Any Digit from 1-9 N : Any Digit from 2-9 [12345-9] : Any digits in the brackets (in this example, 1,2,3,4,5,6,7,8,9) The ‘.’ character will match any remaining digits. For example, 9011. will match any phone number that starts with 9011, excluding 9011 itself.
- 46. Inbound call control Step 10. Define the business hours for company Step 11. Set the inbound route with the destination pre- configured
- 47. Inbound call control (Cont.) • Business hours
- 48. Inbound call control (Cont.) • inbound call control
- 49. Inbound call control (Cont.) Input Is it in the blacklist Give Dial Tone Go to configured destination Yes Yes No Go to holiday destination Yes Go to non-office destination No No Match Resource trunk? Yes Check Next rules No No Yes • Logic Reject the call Match DID/CID Mobile Extension Match Business hours Match Holiday Yes
- 50. Inbound call control (Cont.) Play IVR prompt and wait for key Key Press? Reach Repeat count? Wait for Key time out Valid key? Time out destination Key event destination Invalid destination Yes Yes Yes No No No • IVR
- 51. Inbound call control (Cont.) • Queue
- 52. Inbound call control (Cont.) • Conference Room
- 53. Other basic settings Step 12. Check the feature code for daily use Step 13. Set Voicemail settings to send voicemail to mailbox
- 54. Other basic settings (Cont.) • Check the feature code
- 55. Other basic settings (Cont.) • Voicemail settings
- 56. Security & Backup Step 14. Check basic Security settings Step 15. Do backup when all finished
- 57. Security & Backup (Cont.) • Check basic Security settings
- 58. Security & Backup (Cont.) • Check basic Security settings
- 59. Security & Backup (Cont.) • Check basic Security settings
- 60. Security & Backup (Cont.) • Check basic Security settings Hacker Firewall Sip attack packets MyPBX can detect if an abnormal amount of SIP packets is sent to a SIP station, within a short period of time. MyPBX will then add the IP address of the “guilty” host, to be blacklisted automatically. Once an IP has been added to the blacklist, the host will no longer be able to send any packets to MyPBX, unless the administrator deletes the IP from the blacklist manually.
- 61. Security & Backup (Cont.) • Do backup when all finished Backup the configurations when all tests work fine, you can download it to local pc for storage as well.