Ys10 pad mounted distribution transformer technical support
- 1. Three Phase Pad-Mounted Distribution Transformer Product brochure 2015/1 Zhejiang Farady Electric Co., Ltd. ISO9001&ISO14001 Certificated Enterprise
- 2. ++++General Farady Electric is an ISO9001-2008 certified company that has been manufacturing exceptional distribution and power transformer for last 10 years, one of the reasons for our success over the last decade has been a rigid quality system supported by our quality assurance programs and ongoing research and development, all design undergo complete type testing and routine testing, as per the applicable standards Farady Electric's three phase pad mounted distribution transformers provide a reliable and affordable solution for clients who need to reduce their overall operating costs. they are low-profile, compartment-type transformers, which are generally used for step-down purposes from an underground primary cable supply suitable for mounting outdoors on pads without additional protective enclosures, and meet the following standard: IEC60076,ANSI/IEEEC57.12.00, C57.12.20,C57.12.38, C57.12.90, BS171, SABS 780 etc ++++ Structure Characteristics Cover Removal instructions
- 3. ++++Product Scope Type Three Phase 50 or 60 Hz, 65℃Rise Fluid Type Mineral oil meet IEC std Tank All bracing is interal removable cover Bushings Externally clamped with stainless steel studs and plated hardware Coil Configuration 2-winding or 4-winding or 3-winding (Low-High-Low), 3-winding (Low-Low-High) Capacity 45-3000kVA HV Taps:2-2-1/2% above and blow normal ,or 4-2-1/2% below normal Primary Voltage 2400-19920V Secondary Voltage 208Y/120V to 14400V ++++Service condition a) Both indoor or outdoor b)Air temperature: Maximum temperature: +40℃; Minimum temperature:-25℃ c) Humidity: Monthly average humidity 95%; Daily average humidity 90% . d) Altitude above sea level: Maximum installation altitude: 2000m. e) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc. ++++Application The transformers described herein are designed for the application conditions normally encountered on electric power distribution systems. As such, they are suitable for use under the “usual service conditions” described in IEEE Standard C57. 12.00 general requirements forliquid-immersed distribution, power and regulating transformers. ++++KVA and Standard Voltage Offerings
- 5. Accessories Loadbreak Elbows Loadbreak Bushing insert Bushing well Temperature indicator Liquid Level Gauges Pressure relief Drain valve Low voltage Bushing Bayonet fuse holder
- 6. Copyright 2014 Farady Electric Zhejiang Farady Electric Co.,Ltd TEL:0086-577-61722510/61777258 Fax:0086-577-61777257 Http://www.farady.cn Email:info@farady.cn Add:Su’ao,Liushi,Yueqing,Zhejiang,P.R.China, 325604