1. Disentangling the socio-technical impacts of digitalization: What changes for shop-floor decision-makers?. (2024). Berbegal-Mirabent, Jasmina ; Neirotti, Paolo ; Colombari, Ruggero.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:276:y:2024:i:c:s0925527324002342.

   Full description at Econpapers || Download paper

2. Additive manufacturing service bureau selection: A Bayesian network integrated framework. (2024). Akarte, Milind ; Ghuge, Sagar.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:276:y:2024:i:c:s0925527324002056.

   Full description at Econpapers || Download paper

3. Special Issue: Rethinking operations and supply chain management in light of the 3D printing revolution. (2023). Gold, Stefan ; Kunz, Nathan ; Reiner, Gerald ; Beltagui, Ahmad.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:255:y:2023:i:c:s0925527322002596.

   Full description at Econpapers || Download paper

1. Åhlström, P. ; Danese, P. ; Hines, P. ; Netland, T.H. ; Powell, D. ; Shah, R. ; Thürer, M. ; Van Dun, D.H. Is lean a theory? Viewpoints and outlook. 2021 Int. J. Oper. Prod. Manag.. 41 1852-1878
   Paper not yet in RePEc: Add citation now
   
2. Andersen, P.H. ; Drejer, I. ; Østergaard, C.R. ; Søberg, P.V. ; Wæhrens, B.V. Supplier value creation configurations in high-cost countries. 2019 J. Global Oper. Strat. Sourc.. 12 429-448
   Paper not yet in RePEc: Add citation now
   
3. Ballardini, R.M. ; Flores Ituarte, I. ; Pei, E. Printing spare parts through additive manufacturing: legal and digital business challenges. 2018 J. Manuf. Technol. Manag.. 29 958-982
   Paper not yet in RePEc: Add citation now
   
4. Banaś, A. ; Olejarczyk, M. ; Wojtuszewski, R. . 2019 Vertical Flight Society: Philadelphia, Pennsylvania, USA
   Paper not yet in RePEc: Add citation now
   

5. Baumers, M. ; Dickens, P. ; Tuck, C. ; Hague, R. The cost of additive manufacturing: machine productivity, economies of scale and technology-push. 2016 Technol. Forecast. Soc. Change. 102 193-201

6. Beltagui, A. ; Rosli, A. ; Candi, M. Exaptation in a digital innovation ecosystem: the disruptive impacts of 3D printing. 2020 Res. Pol.. 49 -

7. Boisot, M. ; Child, J. Organizations as adaptive systems in complex environments: the case of China. 1999 Organ. Sci.. 10 237-252

8. Bracken, J. ; Pomorski, T. ; Armstrong, C. ; Prabhu, R. ; Simpson, T.W. ; Jablokow, K. ; Cleary, W. ; Meisel, N.A. Design for metal powder bed fusion: the geometry for additive part selection (GAPS) worksheet. 2020 Addit. Manuf.. 35 -
   Paper not yet in RePEc: Add citation now
   
9. Chaudhuri, A. ; Gerlich, H.A. ; Jayaram, J. ; Ghadge, A. ; Shack, J. ; Brix, B.H. ; Hoffbeck, L.H. ; Ulriksen, N. Selecting spare parts suitable for additive manufacturing: a design science approach. 2021 Prod. Plann. Control. 32 670-687
   Paper not yet in RePEc: Add citation now
   
10. Chaudhuri, A. ; Naseraldin, H. ; Søberg, P.V. ; Kroll, E. ; Librus, M. Should hospitals invest in customised on-demand 3D printing for surgeries?. 2020 Int. J. Oper. Prod. Manag.. 41 55-62
    Paper not yet in RePEc: Add citation now
    
11. Chaudhuri, A. ; Rogers, H. ; Soberg, P. ; Pawar, K.S. The role of service providers in 3D printing adoption. 2019 Ind. Manag. Data Syst.. 119 1189-1205
    Paper not yet in RePEc: Add citation now
    
12. Chekurov, S. Categorization of design for additive manufacturing concepts. 2019 En : ASME International Mechanical Engineering Congress and Exposition, 2019. American Society of Mechanical Engineers: Salt Lake City, UT, USA
    Paper not yet in RePEc: Add citation now
    

13. Chekurov, S. ; Metsä-Kortelainen, S. ; Salmi, M. ; Roda, I. ; Jussila, A. The perceived value of additively manufactured digital spare parts in industry: an empirical investigation. 2018 Int. J. Prod. Econ.. 205 87-97

14. Chen, J. ; Gusikhin, O. ; Finkenstaedt, W. ; Liu, Y.-N. Maintenance, repair, and operations parts inventory management in the era of industry 4.0. 9th IFAC Conference on Manufacturing, Modelling, Management and Control, 2019, Berlin, Germany. 2019 IFAC-PapersOnLine. 52 171-176
    Paper not yet in RePEc: Add citation now
    
15. Coatanéa, E. ; Nagarajan, H.P. ; Panicker, S. ; Prod’hon, R. ; Mokhtarian, H. ; Chakraborti, A. ; Paris, H. ; Ituarte, I.F. ; Haapala, K.R. Systematic manufacturability evaluation using dimensionless metrics and singular value decomposition: a case study for additive manufacturing. 2021 Int. J. Adv. Manuf. Technol.. 115 715-731
    Paper not yet in RePEc: Add citation now
    

16. Delic, M. ; Eyers, D.R. The effect of additive manufacturing adoption on supply chain flexibility and performance: an empirical analysis from the automotive industry. 2020 Int. J. Prod. Econ.. 228 -

17. Dubois, A. ; Gadde, L.-E. “Systematic combining”—a decade later. 2014 J. Bus. Res.. 67 1277-1284
    Paper not yet in RePEc: Add citation now
    

18. Dubois, A. ; Gadde, L.-E. Systematic combining: an abductive approach to case research. 2002 J. Bus. Res.. 55 553-560

19. Eyers, D.R. ; Potter, A.T. ; Gosling, J. ; Naim, M.M. The flexibility of industrial additive manufacturing systems. 2018 Int. J. Oper. Prod. Manag.. 38 2313-2343
    Paper not yet in RePEc: Add citation now
    

20. Ferdows, K. POM Forum: transfer of changing production know‐how. 2006 Prod. Oper. Manag.. 15 1-9

21. Flores Ituarte, I. ; Kretzschmar, N. ; Azman, A.H. ; Chekurov, S. ; Pedersen, D.B. ; Chaudhuri, A. Implications of lattice structures on economics and productivity of metal powder bed fusion. 2020 Addit. Manuf.. 31 -
    Paper not yet in RePEc: Add citation now
    

22. Frandsen, C.S. ; Nielsen, M.M. ; Chaudhuri, A. ; Jayaram, J. ; Govindan, K. In search for classification and selection of spare parts suitable for additive manufacturing: a literature review. 2020 Int. J. Prod. Res.. 58 970-996

23. Gardan, J. Additive manufacturing technologies: state of the art and trends. 2017 Int. J. Prod. Res.. 54 149-168
    Paper not yet in RePEc: Add citation now
    

24. Gourlay, S. Conceptualizing knowledge creation: a critique of Nonaka's theory. 2006 J. Manag. Stud.. 43 1415-1436

25. Hansen, M.T. The search-transfer problem: the role of weak ties in sharing knowledge across organization subunits. 1999 Adm. Sci. Q.. 44 82-111
    Paper not yet in RePEc: Add citation now
    
26. Holmström, J. ; Partanen, J. ; Tuomi, J. ; Walter, M. Rapid manufacturing in the spare parts supply chain: alternative approaches to capacity deployment. 2010 J. Manuf. Technol. Manag.. 21 687-697
    Paper not yet in RePEc: Add citation now
    
27. Kalling, T. Organization‐internal transfer of knowledge and the role of motivation: a qualitative case study. 2003 Knowl. Process Manag.. 10 115-126
    Paper not yet in RePEc: Add citation now
    
28. Khajavi, S.H. ; Partanen, J. ; Holmström, J. Additive manufacturing in the spare parts supply chain. 2014 Comput. Ind.. 65 50-63
    Paper not yet in RePEc: Add citation now
    
29. Klahn, C. ; Leutenecker, B. ; Meboldt, M. Design for additive manufacturing–supporting the substitution of components in series products. 2014 En : . Procedia Cirp: Milano, Italy
    Paper not yet in RePEc: Add citation now
    

30. Kleer, R. ; Piller, F.T. Local manufacturing and structural shifts in competition: market dynamics of additive manufacturing. 2019 Int. J. Prod. Econ.. 216 23-34

31. Knofius, N. ; Van Der Heijden, M.C. ; Zijm, W.H. Consolidating spare parts for asset maintenance with additive manufacturing. 2019 Int. J. Prod. Econ.. 208 269-280

32. Knofius, N. ; Van Der Heijden, M.C. ; Zijm, W.H. Selecting parts for additive manufacturing in service logistics. 2016 J. Manuf. Technol. Manag.. 27 915-931
    Paper not yet in RePEc: Add citation now
    
33. Kretzschmar, N. ; Chekurov, S. ; Salmi, M. ; Tuomi, J. Evaluating the readiness level of additively manufactured digital spare parts: an industrial perspective. 2018 Appl. Sci.. 8 1837-
    Paper not yet in RePEc: Add citation now
    
34. Lindemann, C. ; Reiher, T. ; Jahnke, U. ; Koch, R. Towards a sustainable and economic selection of part candidates for additive manufacturing. 2015 Rapid Prototyp. J.. 21 216-227
    Paper not yet in RePEc: Add citation now
    
35. Louis, M.J. ; Seymour, T. ; Joyce, J. 3d Opportunity for the Department of Defense: Additive Manufacturing Fires up. 2014 Deloitte University Press:
    Paper not yet in RePEc: Add citation now
    
36. Maccarthy, B.L. ; Blome, C. ; Olhager, J. ; Srai, J.S. ; Zhao, X. Supply chain evolution–theory, concepts and science. 2016 Int. J. Oper. Prod. Manag.. 36 1696-1718
    Paper not yet in RePEc: Add citation now
    

37. Mellor, S. ; Hao, L. ; Zhang, D. Additive manufacturing: a framework for implementation. 2014 Int. J. Prod. Econ.. 149 194-201

38. Merriam, S.B. Qualitative Research and Case Study Applications in Education. 1998 Jossey-Bass Publishers: San Francisco, CA
    Paper not yet in RePEc: Add citation now
    
39. Nonaka, I. ; Konno, N. The concept of “Ba”: building a foundation for knowledge creation. 1998 Calif. Manag. Rev.. 40 40-54
    Paper not yet in RePEc: Add citation now
    
40. Ott, K. ; Pascher, H. ; Sihn, W. Improving sustainability and cost efficiency for spare part allocation strategies by utilisation of additive manufacturing technologies. 16th Global Conference on Sustainable Manufacturing - sustainable Manufacturing for Global Circular Economy, 2018, Lexington, Kentucky, USA. 2019 Procedia Manuf.. 33 123-130
    Paper not yet in RePEc: Add citation now
    
41. Polanyi, M. The Tacit Dimension. 1966 Doubleday: Garden City, NY
    Paper not yet in RePEc: Add citation now
    
42. Reddy, K.V.P. ; Mirzana, I.M. ; Reddy, A.K. Application of additive manufacturing technology to an aerospace component for better trade-off's. 7th international conference of materials processing and characterization, 2017, Hyderabad, India. 2018 Mater. Today Proc.. 5 3895-3902
    Paper not yet in RePEc: Add citation now
    

43. Schniederjans, D.G. Adoption of 3D-printing technologies in manufacturing: a survey analysis. 2017 Int. J. Prod. Econ.. 183 287-298

44. Schniederjans, D.G. ; Curado, C. ; Khalajhedayati, M. Supply chain digitisation trends: an integration of knowledge management. 2020 Int. J. Prod. Econ.. 220 -

45. Schulze, A. ; Hoegl, M. Organizational knowledge creation and the generation of new product ideas: a behavioral approach. 2008 Res. Pol.. 37 1742-1750

46. Sgarbossa, F. ; Peron, M. ; Lolli, F. ; Balugani, E. Conventional or additive manufacturing for spare parts management: an extensive comparison for Poisson demand. 2021 Int. J. Prod. Econ.. 233 -

47. Søberg, P.V. Industrial influences on R&D transfer to China. 2010 Chin. Manag. Stud.. 4 322-338
    Paper not yet in RePEc: Add citation now
    
48. Søberg, P.V. The transfer and creation of knowledge within foreign invested R&D in emerging markets. 2011 J. Technol. Manag. China. 6 203-215
    Paper not yet in RePEc: Add citation now
    
49. Søberg, P.V. ; Chaudhuri, A. Technical knowledge creation: enabling tacit knowledge use. 2018 Knowl. Process Manag.. 25 88-96
    Paper not yet in RePEc: Add citation now
    
50. Steenhuis, H.-J. ; Pretorius, L. The additive manufacturing innovation: a range of implications. 2017 J. Manuf. Technol. Manag.. 28 122-143
    Paper not yet in RePEc: Add citation now
    

51. Thomas-Seale, L.E. ; Kirkman-Brown, J.C. ; Attallah, M.M. ; Espino, D.M. ; Shepherd, D.E. The barriers to the progression of additive manufacture: perspectives from UK industry. 2018 Int. J. Prod. Econ.. 198 104-118

52. Weller, C. ; Kleer, R. ; Piller, F.T. Economic implications of 3D printing: market structure models in light of additive manufacturing revisited. 2015 Int. J. Prod. Econ.. 164 43-56

53. Wohlers, T.T. ; Campbell, Ian . 2017 Wohlers Associates, Inc:
    Paper not yet in RePEc: Add citation now
    

54. Yang, S. ; Page, T. ; Zhang, Y. ; Zhao, Y.F. Towards an automated decision support system for the identification of additive manufacturing part candidates. 2020 J. Intell. Manuf.. 31 1917-1933

55. Yang, S. ; Santoro, F. ; Zhao, Y.F. Towards a numerical approach of finding candidates for additive manufacturing-enabled part consolidation. 2018 J. Mech. Des.. 140 -
    Paper not yet in RePEc: Add citation now
    
56. Yao, X. ; Moon, S.K. ; Bi, G. A hybrid machine learning approach for additive manufacturing design feature recommendation. 2017 Rapid Prototyp. J.. 23 983-997
    Paper not yet in RePEc: Add citation now
    
57. Yin, R.K. Case Study Research: Design and Methods. 2009 SAGE Publication: Thousand Oaks, CA
    Paper not yet in RePEc: Add citation now
    

1. Evaluating supply chain dynamics in the presence of product deletion. (2023). Hosseini, Seyed Hossein ; Golrizgashti, Seyedehfatemeh ; Zhu, Qingyun ; Sarkis, Joseph.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:255:y:2023:i:c:s0925527322003048.

   Full description at Econpapers || Download paper

2. Adoption of additive manufacturing: A survey of the role of knowledge networks and maturity in small and medium-sized Danish production firms. (2023). Philipsen, Kristian ; Wickstrom, Kent Adsboll ; Stentoft, Jan ; Haug, Anders.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:255:y:2023:i:c:s0925527322002961.

   Full description at Econpapers || Download paper

3. Clarifying the scaling concept: A review, definition, and measure of scaling performance and an elaborate agenda for future research. (2023). Parida, Vinit ; Palmie, Maximilian ; Wincent, Joakim ; Mader, Anna.
   In: Journal of Business Research.
   RePEc:eee:jbrese:v:158:y:2023:i:c:s0148296322010955.

   Full description at Econpapers || Download paper

4. Impact of Additive Manufacturing on the Supply Chain of Aerospace Spare Parts Industry—A Review. (2022). Adnan, Ziaul Haq ; Shakur, Md Shihab ; Tanjum, Fahmida ; Debnath, Binoy ; Rahman, Azizur M.
   In: Logistics.
   RePEc:gam:jlogis:v:6:y:2022:i:2:p:28-:d:803200.

   Full description at Econpapers || Download paper

5. Knowledge creation dynamics of technological forecasting and social change special issues. (2022). Bhatti, Zeeshan Ahmed ; Ashraf, Rohail ; Khuhro, Rafique Ahmed ; Khan, Muhammad Asif.
   In: Technological Forecasting and Social Change.
   RePEc:eee:tefoso:v:180:y:2022:i:c:s0040162522001950.

   Full description at Econpapers || Download paper

6. Unveiling the knowledge structure of technological forecasting and social change (1969–2020) through an NMF-based hierarchical topic model. (2022). Cunningham, Scott W ; Zhu, Lin.
   In: Technological Forecasting and Social Change.
   RePEc:eee:tefoso:v:174:y:2022:i:c:s0040162521007113.

   Full description at Econpapers || Download paper

7. Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach. (2022). Helo, Petri ; Soberg, Peder Veng ; Foshammer, Jeppe ; Ituarte, Iigo Flores.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:253:y:2022:i:c:s0925527322001657.

   Full description at Econpapers || Download paper

8. The collaborative batching problem in multi-site additive manufacturing. (2022). Gansterer, Margaretha ; Zehetner, Dominik.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:248:y:2022:i:c:s0925527322000251.

   Full description at Econpapers || Download paper

9. The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review. (2022). Carvalho, Helena ; Naghshineh, Bardia.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:247:y:2022:i:c:s0925527321003637.

   Full description at Econpapers || Download paper

10. The impact of the risk of build failure on energy consumption in additive manufacturing. (2022). He, Yinfeng ; Basak, Shreeja ; Baumers, Martin ; Ashcroft, Ian ; Wang, Han.
    In: Journal of Industrial Ecology.
    RePEc:bla:inecol:v:26:y:2022:i:5:p:1771-1783.

    Full description at Econpapers || Download paper

11. Parametric selection of hybrid parts for additive manufacturing. (2021). Schoppe, Michael ; Fuehrer, Kaj.
    In: Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL).
    RePEc:zbw:hiclch:249610.

    Full description at Econpapers || Download paper

12. The impact of IoT and 3D printing on job quality and work organisation: a snapshot from Spain. (2021). Urzì Brancati, Maria Cesira ; Grande, Rafael ; Vallejo-Pea, Alberto.
    In: JRC Working Papers on Labour, Education and Technology.
    RePEc:ipt:laedte:202110.

    Full description at Econpapers || Download paper

13. Assessing the Suitability of Freeform Injection Molding for Low Volume Injection Molded Parts: A Design Science Approach. (2021). Farahani, Saeed Davoudabadi ; Staal, Lasse Guldborg ; Sharifi, Elham ; Waehrens, Brian Vejrum ; Chaudhuri, Atanu.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:3:p:1313-:d:487841.

    Full description at Econpapers || Download paper

14. Technology Forgiveness: Why emerging technologies differ in their resilience to institutional instability. (2021). Vaishnav, Parth ; Mendona, Joana ; Roca, Jaime Bonnin ; Morgan, Granger M ; Fuchs, Erica.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:166:y:2021:i:c:s0040162521000317.

    Full description at Econpapers || Download paper

15. Sustainability orientation, the adoption of 3D printing technologies, and new product performance: A cross-institutional study of American and Indian firms. (2021). Zhao, Mengli ; Liu, Jinxin ; Yang, Jianjun ; Shu, Chengli.
    In: Technovation.
    RePEc:eee:techno:v:101:y:2021:i:c:s0166497220300699.

    Full description at Econpapers || Download paper

16. The economics of additive manufacturing: Towards a general cost model including process failure. (2021). Wildman, Ricky D ; Baumers, Martin ; Ding, Jin ; Clark, Elizabeth A.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:237:y:2021:i:c:s0925527321000633.

    Full description at Econpapers || Download paper

17. Benefiting from additive manufacturing for mass customization across the product life cycle. (2021). Seifert, Ralf W ; Lacroix, Rachel ; Timonina-Farkas, Anna.
    In: Operations Research Perspectives.
    RePEc:eee:oprepe:v:8:y:2021:i:c:s2214716021000208.

    Full description at Econpapers || Download paper

18. The influence of additive manufacturing on early internationalization: considerations into potential avenues of IE research. (2020). Hannibal, Martin.
    In: Journal of International Entrepreneurship.
    RePEc:kap:jinten:v:18:y:2020:i:4:d:10.1007_s10843-019-00267-y.

    Full description at Econpapers || Download paper

19. Cost Modeling and Evaluation of Direct Metal Laser Sintering with Integrated Dynamic Process Planning. (2020). Yang, Yiran ; Di, Lei.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2020:i:1:p:319-:d:473160.

    Full description at Econpapers || Download paper

20. New Business Models for Sustainable Spare Parts Logistics: A Case Study. (2020). Gonzalez-Varona, Jose M ; Pajares, Javier ; Acebes, Fernando ; Villafaez, Felix ; Poza, David ; Lopez-Paredes, Adolfo.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:8:p:3071-:d:344291.

    Full description at Econpapers || Download paper

21. Organic Growth Theory for Corporate Sustainability. (2020). Vinuesa, Ricardo ; Karnama, Ahmad.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:20:p:8523-:d:428685.

    Full description at Econpapers || Download paper

22. Impact Assessment of Additive Manufacturing on Sustainable Business Models in Industry 4.0 Context. (2020). Godina, Radu ; Peas, Paulo ; Ribeiro, Ines ; Carvalho, Helena ; Matos, Florinda ; Ferreira, Bruna T.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:17:p:7066-:d:406121.

    Full description at Econpapers || Download paper

23. Does Emission Trading Boost Carbon Productivity? Evidence from China’s Pilot Emission Trading Scheme. (2020). Zhou, YE ; Liang, Xiaoyu ; Tang, Kai.
    In: IJERPH.
    RePEc:gam:jijerp:v:17:y:2020:i:15:p:5522-:d:392389.

    Full description at Econpapers || Download paper

24. Mapping technological trajectories and exploring knowledge sources: A case study of 3D printing technologies. (2020). Wang, Lili ; Zhang, Shiyun ; Jiang, Shan.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:161:y:2020:i:c:s0040162520310775.

    Full description at Econpapers || Download paper

25. Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers. (2020). Breitenecker, Robert J ; Holzmann, Patrick ; Gregori, Patrick ; Schwarz, Erich J.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:159:y:2020:i:c:s0040162520310192.

    Full description at Econpapers || Download paper

26. The future of manufacturing: A Delphi-based scenario analysis on Industry 4.0. (2020). Sartor, Marco ; Orzes, Guido ; Nassimbeni, Guido ; Culot, Giovanna.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:157:y:2020:i:c:s0040162520309185.

    Full description at Econpapers || Download paper

27. Make disruptive technological change happen - The case of additive manufacturing. (2020). Gartner, Johannes ; Maresch, Daniela.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:155:y:2020:i:c:s0040162517308302.

    Full description at Econpapers || Download paper

28. How to price 3D-printed products? Pricing strategy for 3D printing platforms. (2020). Wang, Yixiao ; Sun, Luoyi ; Hua, Guowei ; Cheng, T. C. E., .
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:226:y:2020:i:c:s0925527319304359.

    Full description at Econpapers || Download paper

29. The role of eco-innovation drivers in promoting additive manufacturing in supply chains. (2020). Jaber, Mohamad Y ; Afshari, Hamid ; Searcy, Cory.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:223:y:2020:i:c:s0925527319303652.

    Full description at Econpapers || Download paper

30. A cost model for the economic evaluation of in-situ monitoring tools in metal additive manufacturing. (2020). Cavalli, Simona ; Grasso, Marco ; Colosimo, Bianca Maria.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:223:y:2020:i:c:s0925527319303597.

    Full description at Econpapers || Download paper

31. The role of 3D printing and open design on adoption of socially sustainable supply chain innovation. (2020). Gold, Stefan ; Kunz, Nathan ; Beltagui, Ahmad.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:221:y:2020:i:c:s0925527319302725.

    Full description at Econpapers || Download paper

32. 3D printing, international trade, and FDI. (2020). Prettner, Klaus ; Martínez-Zarzoso, Inmaculada ; Abeliansky, Ana Lucia ; Martinez-Zarzoso, Inmaculada.
    In: Economic Modelling.
    RePEc:eee:ecmode:v:85:y:2020:i:c:p:288-306.

    Full description at Econpapers || Download paper

33. Decentralized Production: The Need for Social Norms-Based Intellectual Property?. (2019). Nyberg, Timo ; Pihlajarinne, Taina ; Poesche, Jurgen ; Kauranen, Ilkka ; Alen-Savikko, Anette.
    In: International Journal of Innovation and Technology Management (IJITM).
    RePEc:wsi:ijitmx:v:16:y:2019:i:02:n:s0219877019500214.

    Full description at Econpapers || Download paper

34. The New Manufacturing: In Search of the Origins of the Next Generation Manufacturing Start-Ups. (2019). Ferras-Hernandez, Xavier ; Arimany-Serrat, Nuria ; Tarrats-Pons, Elisenda ; Sabata-Alberich, Anna ; Armisen-Morell, Albert.
    In: International Journal of Innovation and Technology Management (IJITM).
    RePEc:wsi:ijitmx:v:16:y:2019:i:02:n:s0219877019500147.

    Full description at Econpapers || Download paper

35. Pricing Decisions and Competitive Conduct Across Manufacturing Sectors: Evidence from 19 European Union Manufacturing Industries. (2019). Amountzias, Chrysovalantis.
    In: Journal of Industry, Competition and Trade.
    RePEc:kap:jincot:v:19:y:2019:i:3:d:10.1007_s10842-019-00293-5.

    Full description at Econpapers || Download paper

36. Contextual Impacts on Industrial Processes Brought by the Digital Transformation of Manufacturing: A Systematic Review. (2019). Bellini, Francesco ; Amendola, Carlo ; Savastano, Marco ; Dascenzo, Fabrizio.
    In: Sustainability.
    RePEc:gam:jsusta:v:11:y:2019:i:3:p:891-:d:204465.

    Full description at Econpapers || Download paper

37. How aluminum changed the world: A metallurgical revolution through technological and cultural perspectives. (2019). Ashkenazi, Dana.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:143:y:2019:i:c:p:101-113.

    Full description at Econpapers || Download paper

38. Effective use of 3D printing in the innovation process. (2019). Candi, Marina ; Beltagui, Ahmad.
    In: Technovation.
    RePEc:eee:techno:v:80-81:y:2019:i::p:63-73.

    Full description at Econpapers || Download paper

39. Is 3D printing an inclusive innovation?: An examination of 3D printing in Brazil. (2019). Woodson, Thomas ; Do, Milena Silva ; Alcantara, Julia Torres.
    In: Technovation.
    RePEc:eee:techno:v:80-81:y:2019:i::p:54-62.

    Full description at Econpapers || Download paper

40. Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing. (2019). Kleer, Robin ; Piller, Frank T.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:216:y:2019:i:c:p:23-34.

    Full description at Econpapers || Download paper

41. A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society. (2019). Caviggioli, Federico ; Ughetto, Elisa.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:208:y:2019:i:c:p:254-268.

    Full description at Econpapers || Download paper

42. Cost-driven build orientation and bin packing of parts in Selective Laser Melting (SLM). (2019). Griffiths, Valeriya ; Chinchapatnam, Phani ; Eres, Murat H ; Scanlan, James P ; Martinez-Sykora, Antonio.
    In: European Journal of Operational Research.
    RePEc:eee:ejores:v:273:y:2019:i:1:p:334-352.

    Full description at Econpapers || Download paper

43. The Effects of Competition, Liquidity and Exports on Markups: Evidence from the UK Food and Beverages Sector. (2018). Amountzias, Chrysovalantis.
    In: Journal of Industry, Competition and Trade.
    RePEc:kap:jincot:v:18:y:2018:i:2:d:10.1007_s10842-017-0260-5.

    Full description at Econpapers || Download paper

44. Complementary multiplatforms in the growing innovation ecosystem: Evidence from 3D printing technology. (2018). Kim, Wonjoon ; Park, Kyungbae ; Kwak, Kiho.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:136:y:2018:i:c:p:192-207.

    Full description at Econpapers || Download paper

45. Critical success factors for adoption of 3D printing. (2018). Chen, Yi-Fan ; Yeh, Ching-Chiang.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:132:y:2018:i:c:p:209-216.

    Full description at Econpapers || Download paper

46. Cost modeling and analysis for Mask Image Projection Stereolithography additive manufacturing: Simultaneous production with mixed geometries. (2018). Yang, Yiran ; Li, Lin.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:206:y:2018:i:c:p:146-158.

    Full description at Econpapers || Download paper

47. The barriers to the progression of additive manufacture: Perspectives from UK industry. (2018). Thomas-Seale, L. E. J., ; Shepherd, D. E. T., ; Attallah, M M ; Kirkman-Brown, J C ; Espino, D M.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:198:y:2018:i:c:p:104-118.

    Full description at Econpapers || Download paper

48. 3D printing and the third mission: The university in the materialization of intellectual capital. (2017). Bhme, Tillmann ; Birtchnell, Thomas ; Gorkin, Robert.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:123:y:2017:i:c:p:240-249.

    Full description at Econpapers || Download paper

49. Predicting the future of additive manufacturing: A Delphi study on economic and societal implications of 3D printing for 2030. (2017). Jiang, Ruth ; Kleer, Robin ; Piller, Frank T.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:117:y:2017:i:c:p:84-97.

    Full description at Econpapers || Download paper

50. Informing Additive Manufacturing technology adoption: total cost and the impact of capacity utilisation. (2017). Beltrametti, Luca ; Hague, Richard ; Baumers, Martin ; Gasparre, Angelo.
    In: Papers.
    RePEc:arx:papers:1706.02090.

    Full description at Econpapers || Download paper

Report date: 2025-10-05 06:48:35 || Missing content? Let us know