1. Increasing the Environmental Sustainability of an Over-Injection Line for the Automotive Component Industry. (2021). , Raul ; Ferreira, Luis P.
   In: Sustainability.
   RePEc:gam:jsusta:v:13:y:2021:i:22:p:12692-:d:680612.

   Full description at Econpapers || Download paper

1. Abdulhameed O.; Al-Ahmari A.; Ameen W.; Mian S.H. Additive manufacturing: Challenges, trends, and applications. Adv. Mech. Eng. 2019, 11, 1687814018822880.
   Paper not yet in RePEc: Add citation now
   

2. Achillas C.; Tzetzis D.; Raimondo M.O. Alternative production strategies based on the comparison of additive and traditional manufacturing technologies. Int. J. Prod. 2017, 55, 3497-3509.

3. Ainsley C.; Gong H.Q. Costs and performance of injection moulding tools produced using slip casting. Rapid Prototyp. J. 1999, 5, 35-44.
   Paper not yet in RePEc: Add citation now
   

4. Alfaify A.; Saleh M.; Abdullah F.M.; Al-Ahmari A.M. Design for Additive Manufacturing: A Systematic Review. Sustainability 2020, 12.

5. ASTM ISO/ASTM52900-15. Standard Terminology for Additive Manufacturing—General Principles—Terminology; ASTM International: West Conshohocken, PA, USA, 2015.
   Paper not yet in RePEc: Add citation now
   
6. Atzeni E.; Salmi A. Economics of additive manufacturing for end-usable metal parts. Int. J. Adv. Manuf. Technol. 2012, 62, 1147-1155.
   Paper not yet in RePEc: Add citation now
   

7. Baumers M.; Dickens P.; Tuck C.; Hague R. The cost of additive manufacturing: Machine productivity, economies of scale and technology-push. Technol. Forecast. Soc. Chang. 2016, 102, 193-201.

8. Berman B. 3-D printing: The new industrial revolution. Bus. Horiz. 2012, 55, 155-162.

9. Bikas H.; Lianos A.K.; Stavropoulos P. A design framework for additive manufacturing. Int. J. Adv. Manuf. Technol. 2019, 103, 3769-3783.
   Paper not yet in RePEc: Add citation now
   
10. Bourell D.; Kruth J.P.; Leu M.; Levy G.; Rosen D.; Beese A.M.; Clare A. Materials for additive manufacturing. CIRP Ann. Manuf. Technol. 2017, 66, 659-681.
    Paper not yet in RePEc: Add citation now
    
11. Brajlih T.; Valentan B.; Balic J.; Drstvensek I. Speed and accuracy evaluation of additive manufacturing machines. Rapid Prototyp. J. 2011, 17, 64-75.
    Paper not yet in RePEc: Add citation now
    
12. Castellion G.; Markham S.K. Perspective: New Product Failure Rates: Influence of Argumentum ad Populum and Self-Interest. J. Prod. Innov. 2013, 30, 976-979.
    Paper not yet in RePEc: Add citation now
    
13. Dimla D.E.; Camilotto M.; Miani F. Design and optimisation of conformal cooling channels in injection moulding tools. J. Mater. Process. Technol. 2005, 164, 1294-1300.
    Paper not yet in RePEc: Add citation now
    
14. Dowling L.; Kennedy J.; O’Shaughnessy S.; Trimble D. A review of critical repeatability and reproducibility issues in powder bed fusion. Mater. Des. 2020, 186, 108346.
    Paper not yet in RePEc: Add citation now
    
15. Equbal A.; Sood A.K.; Shamim M. Rapid tooling: A major shift in tooling practice. Manuf. Ind. Eng. 2015, 14, 3-4.
    Paper not yet in RePEc: Add citation now
    
16. Ford S.; Despeisse M. Additive manufacturing and sustainability: An exploratory study of the advantages and challenges. J. Clean Prod. 2016, 137, 1573-1587.
    Paper not yet in RePEc: Add citation now
    
17. Franchetti M.; Kress C. An economic analysis comparing the cost feasibility of replacing injection molding processes with emerging additive manufacturing techniques. Int. J. Adv. Manuf. Technol. 2017, 88, 2573-2579.
    Paper not yet in RePEc: Add citation now
    
18. Gao W.; Zhang Y.; Ramanujan D.; Ramani K.; Chen Y.; Williams C.B.; Wang C.C.; Shin Y.C.; Zhang S.; Zavattieri P.D. The status, challenges, and future of additive manufacturing in engineering. Comput. Aided Des. 2015, 69, 65-89.
    Paper not yet in RePEc: Add citation now
    
19. Gibson I.; Rosen D.; Stucker B. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing; Springer Science & Business Media: Heidelberg, Germany, 2015.
    Paper not yet in RePEc: Add citation now
    
20. Gokuldoss P.K.; Kolla S.; Eckert J. Additive manufacturing processes: Selective laser melting, electron beam melting and binder jetting—Selection guidelines. Materials 2017, 10.
    Paper not yet in RePEc: Add citation now
    
21. Goodship V. Practical Guide to Injection Moulding; Smithers Rapra: Shropshire, UK, 2017.
    Paper not yet in RePEc: Add citation now
    
22. Gupta N.; Weber C.; Newsome S. Additive Manufacturing: Status and Opportunities; Science and Technology Policy Institute: Washington, DC, USA, 2012.
    Paper not yet in RePEc: Add citation now
    
23. Hällgren S.; Pejryd L.; Ekengren J. (Re)Design for Additive Manufacturing. Procedia CIRP 2016, 50, 246-251.
    Paper not yet in RePEc: Add citation now
    
24. Hassen A.A.; Kirka M.M. Additive Manufacturing: The Rise of a Technology and the Need for Quality Control and Inspection Techniques. Mat. Eval. 2018, 76, 438-453.
    Paper not yet in RePEc: Add citation now
    
25. Holmström J.; Ketokivi M.; Hameri A.P. Bridging practice and theory: A design science approach. Decis. Sci. 2009, 40, 65-87.
    Paper not yet in RePEc: Add citation now
    
26. Holmström J.; Partanen J. Digital manufacturing-driven transformations of service supply chains for complex products. Supply Chain Manag. 2014, 19, 421-430.
    Paper not yet in RePEc: Add citation now
    
27. Islam M.N.; Boswell B.; Pramanik A. An investigation of dimensional accuracy of parts produced by three-dimensional printing. Proceedings of the World Congress on Engineering, London, UK, 3–5 July 2013, ; pp. 522-525.
    Paper not yet in RePEc: Add citation now
    
28. Ivanova O.; Williams C.; Campbell T. Additive manufacturing (AM) and nanotechnology: Promises and challenges. Rapid Prototyp. J. 2013, 19, 353-364.
    Paper not yet in RePEc: Add citation now
    
29. Jiang J. A novel fabrication strategy for additive manufacturing processes. J. Clean Prod. 2020, 272, 122916.
    Paper not yet in RePEc: Add citation now
    
30. Kadkhoda-Ahmadi S.; Hassan A.; Asadollahi-Yazdi E. Process and resource selection methodology in design for additive manufacturing. Int. J. Adv. Manuf. Technol. 2019, 104, 2013-2029.
    Paper not yet in RePEc: Add citation now
    
31. Khajavi S.H.; Partanen J.; Holmström J. Additive manufacturing in the spare parts supply chain. Comput. Ind. 2014, 65, 50-63.
    Paper not yet in RePEc: Add citation now
    

32. Khosravani M.R.; Nasiri S. Injection molding manufacturing process: Review of case-based reasoning applications. J. Intell. Manuf. 2020, 31, 847-864.

33. Khosravani M.R.; Nasiri S.; Weinberg K. Application of case-based reasoning in a fault detection system on production of drippers. Appl. Soft. Comput. 2014, 75, 227-232.
    Paper not yet in RePEc: Add citation now
    
34. Kim H.; Lin Y.; Tseng T.L.B. A review on quality control in additive manufacturing. Rapid Prototyp. J. 2018, 24, 645-669.
    Paper not yet in RePEc: Add citation now
    
35. Kok Y.; Tan X.P.; Wang P.; Nai M.L.S.; Loh N.H.; Liu E.; Tor S.B. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review. Mater. Des. 2018, 139, 565-586.
    Paper not yet in RePEc: Add citation now
    
36. Kumbhar N.N.; Mulay A.V. Post processing methods used to improve surface finish of products which are manufactured by additive manufacturing technologies: A review. J. Inst. Eng. (India) Ser. C 2018, 99, 481-487.
    Paper not yet in RePEc: Add citation now
    
37. Liu W.; Li L.; Kochhar A.K. A method for assessing geometrical errors in layered manufacturing. Part 1: Error interaction and transfer mechanisms. Int. J. Adv. Manuf. Tech. 1998, 14, 637-643.
    Paper not yet in RePEc: Add citation now
    
38. Mashhadi A.R.; Esmaeilian B.; Behdad S. Impact of additive manufacturing adoption on future of supply chains. Proceedings of the International Manufacturing Science and Engineering Conference, Charlotte, NC, USA, 8–12 June 2015, .
    Paper not yet in RePEc: Add citation now
    
39. Meisel N.A.; Williams C.B.; Druschitz A. Lightweight metal cellular structures via indirect 3D printing and casting. Proceedings of the 23rd Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, SFF, Austin, TX, USA, 6–8 August 2012, ; pp. 162-176.
    Paper not yet in RePEc: Add citation now
    

40. Mellor S.; Hao L.; Zhang D. Additive manufacturing: A framework for implementation. Int. J. Prod. Econ. 2014, 149, 194-201.

41. Mischkot M.; Davoudinejad A.; Charalambis A.; Hofstätter T.; Tosello G.; Pedersen D.B.; Hansen H.N. Dimensional accuracy of Acrylonitrile Butadiene Styrene injection molded parts produced in a pilot production with an additively manufactured insert. Proceedings of the 33rd Annual Meeting of the Polymer Processing Society, Cancun, Mexico, 10–14 December 2017, .
    Paper not yet in RePEc: Add citation now
    
42. Mischkot M.; Krexner G.; Soprunyuk V.; Schranz W.; Pedersen D.B.; Tosello G.; Hansen H.N. Influence of thermal ageing on the mechanical properties of an additively manufactured photopolymer used in soft tooling applications. Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, Venice, Italy, 4–8 June 2018, ; pp. 241-242.
    Paper not yet in RePEc: Add citation now
    
43. Ngo T.D.; Kashani A.; Imbalzano G.; Nguyen K.T.; Hui D. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Compos. B. Eng. 2018, 143, 172-196.
    Paper not yet in RePEc: Add citation now
    
44. Niaki M.K.; Nonino F. Impact of additive manufacturing on business competitiveness: A multiple case study. J. Manuf. Technol. Manag. 2017, 28, 56-74.
    Paper not yet in RePEc: Add citation now
    
45. Oettmeier K.; Hofmann E. Impact of additive manufacturing technology adoption on supply chain management processes and components. J. Manuf. Technol. Manag. 2016, 27, 944-968.
    Paper not yet in RePEc: Add citation now
    
46. Pan Y.; Zhou C.; Chen Y.; Partanen J. Multitool and multi-axis computer numerically controlled accumulation for fabricating conformal features on curved surfaces. J. Manuf. Sci. Eng. ASME 2014, 136, 031007.
    Paper not yet in RePEc: Add citation now
    
47. Petrovic V.; Vicente Haro Gonzalez J.; Jordá Ferrando O.; Delgado Gordillo J.; Ramón Blasco Puchades J.; Portolés Griñan L. Additive layered manufacturing: Sectors of industrial application shown through case studies. Int. J. Prod. Res. 2011, 49, 1061-1079.
    Paper not yet in RePEc: Add citation now
    
48. Renjith S.C.; Park K.; Kremer G.E.O. A Design Framework for Additive Manufacturing: Integration of Additive Manufacturing Capabilities in the Early Design Process. Int. J. Precis. 2020, 21, 329-345.
    Paper not yet in RePEc: Add citation now
    

49. Ribeiro I.; Matos F.; Jacinto C.; Salman H.; Cardeal G.; Carvalho H.; Godina R.; Peças P. Framework for Life Cycle Sustainability Assessment of Additive Manufacturing. Sustainability 2020, 12.

50. Rivera F.J.M.; Arciniegas A.J.R. Additive manufacturing methods: Techniques, materials, and closed-loop control applications. Int. J. Adv. Manuf. Technol. 2020, 109, 17-31.
    Paper not yet in RePEc: Add citation now
    
51. Rosato D.V.; Rosato M.G. Injection Molding Handbook; Springer Science & Business Media: Heidelberg, Germany, 2012.
    Paper not yet in RePEc: Add citation now
    
52. Rosochowski A.; Matuszak A. Rapid tooling: The state of the art. J. Mater. Process. Technol. 2000, 106, 191-198.
    Paper not yet in RePEc: Add citation now
    
53. Sharifi E.; Chaudhuri A.; Wæhrens B.V.; Staal L.G.; Davoudabadi Farahani S. Part Selection for Freeform Injection Molding: Framework for Development of a Unique Methodology. Proceedings of the IFIP International Conference on Advances in Production Management Systems, Novi Sad, Serbia, 30 August–3 September 2020, ; pp. 723-730.
    Paper not yet in RePEc: Add citation now
    
54. Simon H.A. The Sciences of the Artificial; MIT Press: Cambridge, MA, USA, 2019.
    Paper not yet in RePEc: Add citation now
    
55. Thomas D.S.; Gilbert S.W. Costs and cost effectiveness of additive manufacturing. NIST Spec. Publ. 2014, 1176, 12.
    Paper not yet in RePEc: Add citation now
    
56. Tofail S.A.M.; Koumoulos E.P.; Bandyopadhyay A.; Bose S.; O’Donoghue L.; Charitidis C. Additive manufacturing: Scientific and technological challenges, market uptake and opportunities. Mater. Today. 2018, 21, 22-37.
    Paper not yet in RePEc: Add citation now
    
57. Tosello G.; Charalambis A.; Kerbache L.; Mischkot M.; Pedersen D.B.; Calaon M.; Hansen H.N. Value chain and production cost optimization by integrating additive manufacturing in injection molding process chain. Int. J. Adv. Manuf. Technol. 2019, 100, 783-795.
    Paper not yet in RePEc: Add citation now
    
58. Venable J.R. The Role of Theory and Theorising in Design Science Research. Proceedings of the 1st International Conference on Design Science in Information Systems and Technology, Claremont, CA, USA, 24 February 2006, ; pp. 1-18.
    Paper not yet in RePEc: Add citation now
    
59. Yang S.; Tang Y.; Zhao Y.F. A new part consolidation method to embrace the design freedom of additive manufacturing. J. Manuf. Process. 2015, 20, 444-449.
    Paper not yet in RePEc: Add citation now
    
60. Yang S.; Zhao Y.F. Additive manufacturing-enabled design theory and methodology: A critical review. Int. J. Adv. Manuf. Technol. 2015, 80, 327-342.
    Paper not yet in RePEc: Add citation now
    
61. Yang Z.; Peng H.; Wang W.; Liu T. Effective properties of particle reinforced polymeric mould material towards reducing cooling time in soft tooling process. J. Appl. Polym. Sci. 2010, 116, 2658-2667.
    Paper not yet in RePEc: Add citation now
    
62. Ziemian C.; Sharma M.; Ziemian S. Anisotropic mechanical properties of ABS parts fabricated by fused deposition modelling. Mech. Eng. 2012, 23, 159-180.
    Paper not yet in RePEc: Add citation now
    

1. Customizing customization in a 3D printing-enabled hybrid manufacturing supply chain. (2024). Li, Wei ; Mustafee, Navonil ; Tong, Meng ; Koh, Lenny ; Sun, Hui.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:268:y:2024:i:c:s0925527323003353.

   Full description at Econpapers || Download paper

2. Advanced Manufacturing Management: A Systematic Literature Review. (2023). Katina, Polinpapilinho F ; Caldwell, Logan R ; Beck, Chrystopher M ; Cash, Casey T.
   In: Sustainability.
   RePEc:gam:jsusta:v:15:y:2023:i:6:p:4702-:d:1089648.

   Full description at Econpapers || Download paper

3. Analyzing Interdependencies among Influencing Factors in Smart Manufacturing. (2023). Anwar, Saqib ; Abdullah, Fawaz M ; Al-Ahmari, Abdulrahman M.
   In: Sustainability.
   RePEc:gam:jsusta:v:15:y:2023:i:4:p:3864-:d:1074836.

   Full description at Econpapers || Download paper

4. Innovation management of three-dimensional printing (3DP) technology: Disclosing insights from existing literature and determining future research streams. (2023). Dabic, Marina ; Opazo-Basaez, Marco ; Mari, Josip ; Vlai, Boidar.
   In: Technological Forecasting and Social Change.
   RePEc:eee:tefoso:v:193:y:2023:i:c:s0040162523002901.

   Full description at Econpapers || Download paper

5. Evaluating supply chain dynamics in the presence of product deletion. (2023). Hosseini, Seyed Hossein ; Golrizgashti, Seyedehfatemeh ; Zhu, Qingyun ; Sarkis, Joseph.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:255:y:2023:i:c:s0925527322003048.

   Full description at Econpapers || Download paper

6. Adoption of additive manufacturing: A survey of the role of knowledge networks and maturity in small and medium-sized Danish production firms. (2023). Philipsen, Kristian ; Wickstrom, Kent Adsboll ; Stentoft, Jan ; Haug, Anders.
   In: International Journal of Production Economics.
   RePEc:eee:proeco:v:255:y:2023:i:c:s0925527322002961.

   Full description at Econpapers || Download paper

7. Clarifying the scaling concept: A review, definition, and measure of scaling performance and an elaborate agenda for future research. (2023). Parida, Vinit ; Palmie, Maximilian ; Wincent, Joakim ; Mader, Anna.
   In: Journal of Business Research.
   RePEc:eee:jbrese:v:158:y:2023:i:c:s0148296322010955.

   Full description at Econpapers || Download paper

8. Investigating the interaction of factors for implementing additive manufacturing to build an antifragile supply chain: TISM-MICMAC approach. (2022). Bag, Surajit ; Mishra, Ruchi ; Kr, Rajesh ; Priyadarshini, Jaya.
   In: Operations Management Research.
   RePEc:spr:opmare:v:15:y:2022:i:1:d:10.1007_s12063-022-00259-7.

   Full description at Econpapers || Download paper

9. Economic and Environmental Potential of Wire-Arc Additive Manufacturing. (2022). Dias, Manuel ; Ribeiro, Ines ; Ferreira, Bruna.
   In: Sustainability.
   RePEc:gam:jsusta:v:14:y:2022:i:9:p:5197-:d:801994.

   Full description at Econpapers || Download paper

10. The First 3D-Printed Building in Spain: A Study on Its Acoustic, Thermal and Environmental Performance. (2022). Gomez-Lozano, Vicente ; Guillen-Guillamon, Ignacio ; Salandin, Andrea ; Quintana-Gallardo, Alberto.
    In: Sustainability.
    RePEc:gam:jsusta:v:14:y:2022:i:20:p:13204-:d:942270.

    Full description at Econpapers || Download paper

11. Assessing Adoption Factors for Additive Manufacturing: Insights from Case Studies. (2022). Boehme, Tillmann ; Handfield, Robert B ; Turner, Neil ; Aitken, James ; Bozarth, Cecil.
    In: Logistics.
    RePEc:gam:jlogis:v:6:y:2022:i:2:p:36-:d:835802.

    Full description at Econpapers || Download paper

12. Impact of Additive Manufacturing on the Supply Chain of Aerospace Spare Parts Industry—A Review. (2022). Adnan, Ziaul Haq ; Shakur, Md Shihab ; Tanjum, Fahmida ; Debnath, Binoy ; Rahman, Azizur M.
    In: Logistics.
    RePEc:gam:jlogis:v:6:y:2022:i:2:p:28-:d:803200.

    Full description at Econpapers || Download paper

13. Knowledge creation dynamics of technological forecasting and social change special issues. (2022). Bhatti, Zeeshan Ahmed ; Ashraf, Rohail ; Khuhro, Rafique Ahmed ; Khan, Muhammad Asif.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:180:y:2022:i:c:s0040162522001950.

    Full description at Econpapers || Download paper

14. Unveiling the knowledge structure of technological forecasting and social change (1969–2020) through an NMF-based hierarchical topic model. (2022). Cunningham, Scott W ; Zhu, Lin.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:174:y:2022:i:c:s0040162521007113.

    Full description at Econpapers || Download paper

15. Identification of aftermarket and legacy parts suitable for additive manufacturing: A knowledge management-based approach. (2022). Helo, Petri ; Soberg, Peder Veng ; Foshammer, Jeppe ; Ituarte, Iigo Flores.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:253:y:2022:i:c:s0925527322001657.

    Full description at Econpapers || Download paper

16. The collaborative batching problem in multi-site additive manufacturing. (2022). Gansterer, Margaretha ; Zehetner, Dominik.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:248:y:2022:i:c:s0925527322000251.

    Full description at Econpapers || Download paper

17. The implications of additive manufacturing technology adoption for supply chain resilience: A systematic search and review. (2022). Carvalho, Helena ; Naghshineh, Bardia.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:247:y:2022:i:c:s0925527321003637.

    Full description at Econpapers || Download paper

18. The impact of the risk of build failure on energy consumption in additive manufacturing. (2022). He, Yinfeng ; Basak, Shreeja ; Baumers, Martin ; Ashcroft, Ian ; Wang, Han.
    In: Journal of Industrial Ecology.
    RePEc:bla:inecol:v:26:y:2022:i:5:p:1771-1783.

    Full description at Econpapers || Download paper

19. Parametric selection of hybrid parts for additive manufacturing. (2021). Schoppe, Michael ; Fuehrer, Kaj.
    In: Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL).
    RePEc:zbw:hiclch:249610.

    Full description at Econpapers || Download paper

20. The impact of IoT and 3D printing on job quality and work organisation: a snapshot from Spain. (2021). Urzì Brancati, Maria Cesira ; Grande, Rafael ; Vallejo-Pea, Alberto.
    In: JRC Working Papers on Labour, Education and Technology.
    RePEc:ipt:laedte:202110.

    Full description at Econpapers || Download paper

21. Artificial Intelligence and Business Strategy towards Digital Transformation: A Research Agenda. (2021). Kamariotou, Maria ; Kitsios, Fotis.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:4:p:2025-:d:498801.

    Full description at Econpapers || Download paper

22. Assessing the Suitability of Freeform Injection Molding for Low Volume Injection Molded Parts: A Design Science Approach. (2021). Farahani, Saeed Davoudabadi ; Staal, Lasse Guldborg ; Sharifi, Elham ; Waehrens, Brian Vejrum ; Chaudhuri, Atanu.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:3:p:1313-:d:487841.

    Full description at Econpapers || Download paper

23. Technology Forgiveness: Why emerging technologies differ in their resilience to institutional instability. (2021). Vaishnav, Parth ; Mendona, Joana ; Roca, Jaime Bonnin ; Morgan, Granger M ; Fuchs, Erica.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:166:y:2021:i:c:s0040162521000317.

    Full description at Econpapers || Download paper

24. Sustainability orientation, the adoption of 3D printing technologies, and new product performance: A cross-institutional study of American and Indian firms. (2021). Zhao, Mengli ; Liu, Jinxin ; Yang, Jianjun ; Shu, Chengli.
    In: Technovation.
    RePEc:eee:techno:v:101:y:2021:i:c:s0166497220300699.

    Full description at Econpapers || Download paper

25. The economics of additive manufacturing: Towards a general cost model including process failure. (2021). Wildman, Ricky D ; Baumers, Martin ; Ding, Jin ; Clark, Elizabeth A.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:237:y:2021:i:c:s0925527321000633.

    Full description at Econpapers || Download paper

26. Benefiting from additive manufacturing for mass customization across the product life cycle. (2021). Seifert, Ralf W ; Lacroix, Rachel ; Timonina-Farkas, Anna.
    In: Operations Research Perspectives.
    RePEc:eee:oprepe:v:8:y:2021:i:c:s2214716021000208.

    Full description at Econpapers || Download paper

27. The influence of additive manufacturing on early internationalization: considerations into potential avenues of IE research. (2020). Hannibal, Martin.
    In: Journal of International Entrepreneurship.
    RePEc:kap:jinten:v:18:y:2020:i:4:d:10.1007_s10843-019-00267-y.

    Full description at Econpapers || Download paper

28. Cost Modeling and Evaluation of Direct Metal Laser Sintering with Integrated Dynamic Process Planning. (2020). Yang, Yiran ; Di, Lei.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2020:i:1:p:319-:d:473160.

    Full description at Econpapers || Download paper

29. New Business Models for Sustainable Spare Parts Logistics: A Case Study. (2020). Gonzalez-Varona, Jose M ; Pajares, Javier ; Acebes, Fernando ; Villafaez, Felix ; Poza, David ; Lopez-Paredes, Adolfo.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:8:p:3071-:d:344291.

    Full description at Econpapers || Download paper

30. Organic Growth Theory for Corporate Sustainability. (2020). Vinuesa, Ricardo ; Karnama, Ahmad.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:20:p:8523-:d:428685.

    Full description at Econpapers || Download paper

31. Impact Assessment of Additive Manufacturing on Sustainable Business Models in Industry 4.0 Context. (2020). Godina, Radu ; Peas, Paulo ; Ribeiro, Ines ; Carvalho, Helena ; Matos, Florinda ; Ferreira, Bruna T.
    In: Sustainability.
    RePEc:gam:jsusta:v:12:y:2020:i:17:p:7066-:d:406121.

    Full description at Econpapers || Download paper

32. Does Emission Trading Boost Carbon Productivity? Evidence from China’s Pilot Emission Trading Scheme. (2020). Zhou, YE ; Liang, Xiaoyu ; Tang, Kai.
    In: IJERPH.
    RePEc:gam:jijerp:v:17:y:2020:i:15:p:5522-:d:392389.

    Full description at Econpapers || Download paper

33. Mapping technological trajectories and exploring knowledge sources: A case study of 3D printing technologies. (2020). Wang, Lili ; Zhang, Shiyun ; Jiang, Shan.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:161:y:2020:i:c:s0040162520310775.

    Full description at Econpapers || Download paper

34. Business model design for novel technologies in nascent industries: An investigation of 3D printing service providers. (2020). Breitenecker, Robert J ; Holzmann, Patrick ; Gregori, Patrick ; Schwarz, Erich J.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:159:y:2020:i:c:s0040162520310192.

    Full description at Econpapers || Download paper

35. The future of manufacturing: A Delphi-based scenario analysis on Industry 4.0. (2020). Sartor, Marco ; Orzes, Guido ; Nassimbeni, Guido ; Culot, Giovanna.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:157:y:2020:i:c:s0040162520309185.

    Full description at Econpapers || Download paper

36. Make disruptive technological change happen - The case of additive manufacturing. (2020). Gartner, Johannes ; Maresch, Daniela.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:155:y:2020:i:c:s0040162517308302.

    Full description at Econpapers || Download paper

37. How to price 3D-printed products? Pricing strategy for 3D printing platforms. (2020). Wang, Yixiao ; Sun, Luoyi ; Hua, Guowei ; Cheng, T. C. E., .
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:226:y:2020:i:c:s0925527319304359.

    Full description at Econpapers || Download paper

38. The role of eco-innovation drivers in promoting additive manufacturing in supply chains. (2020). Jaber, Mohamad Y ; Afshari, Hamid ; Searcy, Cory.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:223:y:2020:i:c:s0925527319303652.

    Full description at Econpapers || Download paper

39. A cost model for the economic evaluation of in-situ monitoring tools in metal additive manufacturing. (2020). Cavalli, Simona ; Grasso, Marco ; Colosimo, Bianca Maria.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:223:y:2020:i:c:s0925527319303597.

    Full description at Econpapers || Download paper

40. The role of 3D printing and open design on adoption of socially sustainable supply chain innovation. (2020). Gold, Stefan ; Kunz, Nathan ; Beltagui, Ahmad.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:221:y:2020:i:c:s0925527319302725.

    Full description at Econpapers || Download paper

41. 3D printing, international trade, and FDI. (2020). Prettner, Klaus ; Martínez-Zarzoso, Inmaculada ; Abeliansky, Ana Lucia ; Martinez-Zarzoso, Inmaculada.
    In: Economic Modelling.
    RePEc:eee:ecmode:v:85:y:2020:i:c:p:288-306.

    Full description at Econpapers || Download paper

42. Decentralized Production: The Need for Social Norms-Based Intellectual Property?. (2019). Nyberg, Timo ; Pihlajarinne, Taina ; Poesche, Jurgen ; Kauranen, Ilkka ; Alen-Savikko, Anette.
    In: International Journal of Innovation and Technology Management (IJITM).
    RePEc:wsi:ijitmx:v:16:y:2019:i:02:n:s0219877019500214.

    Full description at Econpapers || Download paper

43. The New Manufacturing: In Search of the Origins of the Next Generation Manufacturing Start-Ups. (2019). Ferras-Hernandez, Xavier ; Arimany-Serrat, Nuria ; Tarrats-Pons, Elisenda ; Sabata-Alberich, Anna ; Armisen-Morell, Albert.
    In: International Journal of Innovation and Technology Management (IJITM).
    RePEc:wsi:ijitmx:v:16:y:2019:i:02:n:s0219877019500147.

    Full description at Econpapers || Download paper

44. Pricing Decisions and Competitive Conduct Across Manufacturing Sectors: Evidence from 19 European Union Manufacturing Industries. (2019). Amountzias, Chrysovalantis.
    In: Journal of Industry, Competition and Trade.
    RePEc:kap:jincot:v:19:y:2019:i:3:d:10.1007_s10842-019-00293-5.

    Full description at Econpapers || Download paper

45. Contextual Impacts on Industrial Processes Brought by the Digital Transformation of Manufacturing: A Systematic Review. (2019). Bellini, Francesco ; Amendola, Carlo ; Savastano, Marco ; Dascenzo, Fabrizio.
    In: Sustainability.
    RePEc:gam:jsusta:v:11:y:2019:i:3:p:891-:d:204465.

    Full description at Econpapers || Download paper

46. How aluminum changed the world: A metallurgical revolution through technological and cultural perspectives. (2019). Ashkenazi, Dana.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:143:y:2019:i:c:p:101-113.

    Full description at Econpapers || Download paper

47. Effective use of 3D printing in the innovation process. (2019). Candi, Marina ; Beltagui, Ahmad.
    In: Technovation.
    RePEc:eee:techno:v:80-81:y:2019:i::p:63-73.

    Full description at Econpapers || Download paper

48. Is 3D printing an inclusive innovation?: An examination of 3D printing in Brazil. (2019). Woodson, Thomas ; Do, Milena Silva ; Alcantara, Julia Torres.
    In: Technovation.
    RePEc:eee:techno:v:80-81:y:2019:i::p:54-62.

    Full description at Econpapers || Download paper

49. Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing. (2019). Kleer, Robin ; Piller, Frank T.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:216:y:2019:i:c:p:23-34.

    Full description at Econpapers || Download paper

50. A bibliometric analysis of the research dealing with the impact of additive manufacturing on industry, business and society. (2019). Caviggioli, Federico ; Ughetto, Elisa.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:208:y:2019:i:c:p:254-268.

    Full description at Econpapers || Download paper

51. Cost-driven build orientation and bin packing of parts in Selective Laser Melting (SLM). (2019). Griffiths, Valeriya ; Chinchapatnam, Phani ; Eres, Murat H ; Scanlan, James P ; Martinez-Sykora, Antonio.
    In: European Journal of Operational Research.
    RePEc:eee:ejores:v:273:y:2019:i:1:p:334-352.

    Full description at Econpapers || Download paper

52. The Effects of Competition, Liquidity and Exports on Markups: Evidence from the UK Food and Beverages Sector. (2018). Amountzias, Chrysovalantis.
    In: Journal of Industry, Competition and Trade.
    RePEc:kap:jincot:v:18:y:2018:i:2:d:10.1007_s10842-017-0260-5.

    Full description at Econpapers || Download paper

53. Complementary multiplatforms in the growing innovation ecosystem: Evidence from 3D printing technology. (2018). Kim, Wonjoon ; Park, Kyungbae ; Kwak, Kiho.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:136:y:2018:i:c:p:192-207.

    Full description at Econpapers || Download paper

54. Critical success factors for adoption of 3D printing. (2018). Chen, Yi-Fan ; Yeh, Ching-Chiang.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:132:y:2018:i:c:p:209-216.

    Full description at Econpapers || Download paper

55. Cost modeling and analysis for Mask Image Projection Stereolithography additive manufacturing: Simultaneous production with mixed geometries. (2018). Yang, Yiran ; Li, Lin.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:206:y:2018:i:c:p:146-158.

    Full description at Econpapers || Download paper

56. The barriers to the progression of additive manufacture: Perspectives from UK industry. (2018). Thomas-Seale, L. E. J., ; Shepherd, D. E. T., ; Attallah, M M ; Kirkman-Brown, J C ; Espino, D M.
    In: International Journal of Production Economics.
    RePEc:eee:proeco:v:198:y:2018:i:c:p:104-118.

    Full description at Econpapers || Download paper

57. 3D printing and the third mission: The university in the materialization of intellectual capital. (2017). Bhme, Tillmann ; Birtchnell, Thomas ; Gorkin, Robert.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:123:y:2017:i:c:p:240-249.

    Full description at Econpapers || Download paper

58. Predicting the future of additive manufacturing: A Delphi study on economic and societal implications of 3D printing for 2030. (2017). Jiang, Ruth ; Kleer, Robin ; Piller, Frank T.
    In: Technological Forecasting and Social Change.
    RePEc:eee:tefoso:v:117:y:2017:i:c:p:84-97.

    Full description at Econpapers || Download paper

59. Informing Additive Manufacturing technology adoption: total cost and the impact of capacity utilisation. (2017). Beltrametti, Luca ; Hague, Richard ; Baumers, Martin ; Gasparre, Angelo.
    In: Papers.
    RePEc:arx:papers:1706.02090.

    Full description at Econpapers || Download paper

60. Too much cocited documents. This list is not complete

Report date: 2025-10-05 06:56:09 || Missing content? Let us know