1. Thermal Insulation of Agricultural Buildings Using Different Biomass Materials. (2025). Wardal, Witold Jan ; Barwicki, Jan ; Mazur, Kamila Ewelina ; Tseyko, Mikhail.
   In: Energies.
   RePEc:gam:jeners:v:18:y:2025:i:3:p:636-:d:1580329.

   Full description at Econpapers || Download paper

1. Šadauskiene, J.; Monstvilas, E.; Stankevicius, V. The impact of exterior finish vapour resistance on the moisture state of building walls. Technol. Econ. Dev. Econ. 2007, 13, 73–82. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
2. Abadie, M.O.; Mendonça, K.C. Moisture performance of building materials: From material characterization to building simulation using the Moisture Buffer Value concept. Build. Environ. 2009, 44, 388–401. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
3. Abu-Jdayil, B.; Mourad, A.-H.; Hittini, W.; Hassan, M.; Hameedi, S. Traditional, state-of-the-art and renewable thermal building insulation materials: An overview. Constr. Build. Mater. 2019, 214, 709–735. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
4. Aegerter, M.A.; Leventis, N.; Koebel, M.M. (Eds.) Aerogels Handbook; Springer: New York, NY, USA, 2011. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
5. Alves, S.; Ferreira, C.; de Freitas, V.P.; Guimarães, A. Existing Buildings—Improvement Measures of Energy Performance and Indoor Air Quality; 2011.
   Paper not yet in RePEc: Add citation now
   
6. Ansell, M.P.; Ball, R.J.; Lawrence, M.; Maskell, D.; Shea, A.; Walker, P. Green composites for the built environment. In Green Composites; Elsevier: Amsterdam, The Netherlands, 2017; pp. 123–148. [CrossRef]
   Paper not yet in RePEc: Add citation now
   
7. Appleton, J. Old Buildings Rehabilitation (In Portuguese), 2nd ed.; Editora ORION: Lisboa, Portugal, 2011.
   Paper not yet in RePEc: Add citation now
   
8. Applied Precision Ltd. Isomet 2114 Thermal Properties Analyzer User’s Guide; Version 120712; Applied Precision Ltd.: Bratislava, Slovakia, 2019.
   Paper not yet in RePEc: Add citation now
   
9. Ashby, M.; Jones, D. Engineering Materials: An Introduction to Their Properties and Applications, 2nd ed.; Pergamon Press: Cambridge, UK, 1982.
   Paper not yet in RePEc: Add citation now
   
10. ASHRAE ANSI/ASHRAE 160-2016; Criteria for Moisture-Control Design Analysis in Buildings (ANSI Approved). ANSI/ASHRAE: Peachtree Corners, GA, USA, 2016.
    Paper not yet in RePEc: Add citation now
    
11. ASHRAE ANSI/ASHRAE 55; Thermal Environmental Conditions for Human Occupancy. ANSI/ASHRAE: Peachtree Corners, GA, USA, 2017.
    Paper not yet in RePEc: Add citation now
    
12. Assembleia da República, Statute 379-A/2015—1st Alteration to Statute 349-B/2013, Presenting the Thermal Insulation Requisites for Buildings; Diário da República: Portugal, 2015; Volume 207. (In Portuguese)
    Paper not yet in RePEc: Add citation now
    
13. ASTM D5334-14; Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure, USA. American Society for Testing and Materials: West Conshohocken, PA, USA, 2014. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
14. ASTM D5930-17; Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique, USA. American Society for Testing and Materials: West Conshohocken, PA, USA, 2009.
    Paper not yet in RePEc: Add citation now
    
15. Baetens, R.; Jelle, B.P.; Gustavsen, A. Aerogel insulation for building applications: A state-of-the-art review. Energy Build. 2010, 43, 761–769. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
16. Barclay, M.; Holcroft, N.; Shea, A.D. Methods to determine whole building hygrothermal performance of hemp–lime buildings. Build. Environ. 2014, 80, 204–212. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
17. Barreira, E.; de Freitas, V.P. External Thermal Insulation Composite Systems (ETICS); Springer International Publishing: Cham, Switzerland, 2016. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
18. Barreira, E.; de Freitas, V.P. External Thermal Insulation Composite Systems: Critical Parameters for Surface Hygrothermal Behaviour. Adv. Mater. Sci. Eng. 2014, 2014, 650752. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
19. Beck, H.E.; Zimmermann, N.E.; McVicar, T.R.; Vergopolan, N.; Berg, A.; Wood, E.F. Present and future Köppen-Geiger climate classification maps at 1-km resolution. Sci. Data 2018, 5, 180214. [CrossRef] [PubMed]
    Paper not yet in RePEc: Add citation now
    

20. Berardi, U. A cross-country comparison of the building energy consumptions and their trends. Resour. Conserv. Recycl. 2017, 123, 230–241. [CrossRef]

21. Berardi, U. Aerogel-enhanced systems for building energy retrofits: Insights from a case study. Energy Build. 2018, 159, 370–381. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
22. Broda, J. Application of Polypropylene Fibrillated Fibres for Reinforcement of Concrete and Cement Mortars. In High Performance Concrete Technology and Applications, 1st ed.; Yilmaz, S., Ozmen, H., Eds.; InTechOpen: London, UK, 2016; pp. 189–204. [CrossRef] Energies 2023, 16, 3048 32 of 33
    Paper not yet in RePEc: Add citation now
    
23. Bui, R.; Labat, M.; Lorente, S. Impact of the occupancy scenario on the hygrothermal performance of a room. Build. Environ. 2019, 160, 106178. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
24. Buratti, C.; Belloni, E.; Merli, F. Water vapour permeability of innovative building materials from different waste. Mater. Lett. 2020, 265, 127459. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
25. CCE. Energy Rehabilitation Methodology for Buildings Located in Urban Areas—A SAVE II Programme Action; CCE: Amadora, Portugal, 2000.
    Paper not yet in RePEc: Add citation now
    
26. CEN EN 1015-18; Methods of test for mortar for masonry—Part 18: Determination of Water Absorption Coefficient Due to Capillary Action of Hardened Mortar. Comité Européen de Normalisation: Brussels, Belgium, 2002.
    Paper not yet in RePEc: Add citation now
    
27. CEN EN 15026; Hygrothermal Performance of Building Components and Building Elements—Assessment of Moisture Transfer by Numerical Simulation. Comité Européen de Normalisation: Brussels, Belgium, 2007.
    Paper not yet in RePEc: Add citation now
    
28. CEN EN 998-1: 2010; Specification for Mortar for Masonry–Part 1: Rendering and Plastering Mortar. Comité Européen de Normalisation: Brussels, Belgium, 2010.
    Paper not yet in RePEc: Add citation now
    
29. CEN EN ISO 12570:2000+A1; Hygrothermal Performance of Building Materials and Products–Determination of Moisture Content by Drying at Elevated Temperature. Comité Européen de Normalisation: Brussels, Belgium, 2013.
    Paper not yet in RePEc: Add citation now
    
30. CEN EN ISO 12571; Hygrothermal Performance of Building Materials and Products—Determination of Hygroscopic Sorption Properties. Comité Européen de Normalisation: Brussels, Belgium, 2013.
    Paper not yet in RePEc: Add citation now
    
31. Cerolini, S.; D’Orazio, M.; Di Perna, C.; Stazi, A. Moisture buffering capacity of highly absorbing materials. Energy Build. 2009, 41, 164–168. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
32. Cho, H.M.; Park, J.H.; Wi, S.; Chang, S.J.; Yun, G.Y.; Kim, S. Energy retrofit analysis of cross-laminated timber residential buildings in Seoul, Korea: Insights from a case study of packages. Energy Build. 2019, 202, 109329. [CrossRef] Energies 2023, 16, 3048 33 of 33
    Paper not yet in RePEc: Add citation now
    
33. Collet, F.; Chamoin, J.; Pretot, S.; Lanos, C. Comparison of the hygric behaviour of three hemp concretes. Energy Build. 2013, 62, 294–303. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
34. Crawford, C.B. Frost durability of clay bricks—Evaluation criteria and quality control. In CBAC/DBR Manufacturers’ Symposium; NRC of Canada: Ottawa, ON, Canada, 1984.
    Paper not yet in RePEc: Add citation now
    
35. Dams, B.; Amornrattanasereegul, N.; Shepherd, P.; Ball, R.J. Cement-fibre composites for additive building manufacturing. In 39th Cement and Concrete Science Conference; Ball, R.J., Dams, B., Ferrandiz-Mas, V., Ke, X., Paine, K., Tyrer, M., Walker, P., Eds.; University of Bath: Bath, UK, 2019; pp. 14–18.
    Paper not yet in RePEc: Add citation now
    
36. de Fátima Júlio, M.; Soares, A.; Ilharco, L.M.; Flores-Colen, I.; de Brito, J. Aerogel-based renders with lightweight aggregates: Correlation between molecular/pore structure and performance. Constr. Build. Mater. 2016, 124, 485–495. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
37. de Freitas, V.P. (Ed.) Support Manual for the Rehabilitation Project of Old Buildings, 1st ed.; Ordem dos Engenheiros da Região Norte: Porto, Portugal, 2012. (In Portuguese)
    Paper not yet in RePEc: Add citation now
    
38. de Freitas, V.P.; Krus, M.; Kunzel, H.; Quenard, D. Determination of the water diffusivity of porous materials by gamma-ray attenuations and nmr. In Proceedings of the International Symposium On Moisture Problems In Building Walls, Porto, Portugal, 11–13 September 1995; pp. 445–460.
    Paper not yet in RePEc: Add citation now
    
39. Decree-Law 118/2013; Energy Certification of Buildings (SCE), Regulation of Energy Performance of Residential Buildings (REH) and Regulation of Energy Performance of Buildings Trade and Services (RECS). Diário da República 2013. Volume 159, pp. 4988–5005. (In Portuguese)
    Paper not yet in RePEc: Add citation now
    
40. Delgado, J.M.P.Q.; Barreira, E.; Ramos, N.M.M.; de Freitas, V.P. Inputs for Hygrothermal Simulation Tools. In Hygrothermal Numerical Simulation Tools Applied to Building Physics, 1st ed.; Delgado, J., Barreira, E., Ramos, N.M.M., de Freitas, V.P., Eds.; Springer: Dordrecht, The Netherlands, 2013; pp. 7–20. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
41. Dhakal, U.; Berardi, U.; Gorgolewski, M.; Richman, R. Hygrothermal performance of hempcrete for Ontario (Canada) buildings. J. Clean. Prod. 2017, 142, 3655–3664. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
42. Ducoulombier, L.; Lafhaj, Z. Comparative study of hygrothermal properties of five thermal insulation materials. Case Stud. Therm. Eng. 2017, 10, 628–640. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
43. Ebert, H.-P. Thermal Properties of Aerogels. In Aerogels Handb, 1st ed.; Aegerter, M., Leventis, N., Koebel, M.M., Eds.; Springer: New York, NY, USA, 2011; pp. 537–564. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
44. Enersens, Product Data Sheet: Aerogel Kwark. 2019. Available online: http://enersens.fr/en/home/ (accessed on 7 January 2020).
    Paper not yet in RePEc: Add citation now
    
45. European Commission. HOMES Key INsulating Material-HOMESKIN. 2019. Available online: http://cordis.europa.eu/project/ rcn/193413_en.html (accessed on 27 December 2019).
    Paper not yet in RePEc: Add citation now
    
46. Evrard, A.; De Herde, A. Hygrothermal Performance of Lime-Hemp Wall Assemblies. J. Build. Phys. 2010, 34, 5–25. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
47. Fantucci, S.; Fenoglio, E.; Grosso, G.; Serra, V.; Perino, M.; Marino, V.; Dutto, M. Development of an aerogel-based thermal coating for the energy retrofit and the prevention of condensation risk in existing buildings. Sci. Technol. Built Environ. 2019, 25, 1178–1186. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
48. Fantucci, S.; Fenoglio, E.; Serra, V.; Perino, M.; Dutto, M.; Marino, V. Hygrothermal Characterization of High-Performance Aerogel-Based Internal Plaster. In Sustainability in Energy and Buildings. Smart Innovation, Systems and Technologies, 1st ed.; Littlewood, J., Howlett, R., Capozzoli, A., Jain, L., Eds.; Springer: Singapore, 2020; pp. 259–268. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
49. Fenoglio, E.; Fantucci, S.; Serra, V.; Carbonaro, C.; Pollo, R. Hygrothermal and environmental performance of a perlite-based insulating plaster for the energy retrofit of buildings. Energy Build. 2018, 179, 26–38. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
50. Filho, R.D.T.; Ghavami, K.; England, G.L.; Scrivener, K. Development of vegetable fibre–mortar composites of improved durability. Cem. Concr. Compos. 2003, 25, 185–196. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
51. Freitas, A.M.; de Freitas, V.P. Miranda, Main Pathologies Associated with External Thermal Insulation Composite Systems (ETICS)—LFCIC -282A-2014; APFAC: Porto, Portugal, 2014. (In Portuguese) Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
    Paper not yet in RePEc: Add citation now
    
52. Ganobjak, M.; Brunner, S.; Wernery, J. Aerogel materials for heritage buildings: Materials, properties and case studies. J. Cult. Herit. 2020, 42, 81–98. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
53. Garrido, R.; Silvestre, J.D.; Flores-Colen, I.; de Fátima Júlio, M.; Pedroso, M. Economic assessment of the production of subcritically dried silica-based aerogels. J. Non-Cryst. Solids 2019, 516, 26–34. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
54. Gomes, M.G.; Flores-Colen, I.; da Silva, F.; Pedroso, M. Thermal conductivity measurement of thermal insulating mortars with EPS and silica aerogel by steady-state and transient methods. Constr. Build. Mater. 2018, 172, 696–705. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
55. Gomes, M.G.; Flores-Colen, I.; Manga, L.M.; Soares, A.; de Brito, J. The influence of moisture content on the thermal conductivity of external thermal mortars. Constr. Build. Mater. 2017, 135, 279–286. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
56. Graham, J.; Berardi, U.; Turnbull, G.; McKaye, R. Microclimate Analysis as a Design Driver of Architecture. Climate 2020, 8, 72. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
57. Guyer, E.; Brownell, D. (Eds.) Handbook of Applied Thermal Design, 1st ed.; Taylor & Francis: Philadelphia, PA, USA, 1999.
    Paper not yet in RePEc: Add citation now
    
58. Hamid, A.A.; Wallentén, P. Hygrothermal assessment of internally added thermal insulation on external brick walls in Swedish multifamily buildings. Build. Environ. 2017, 123, 351–362. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
59. Hansen, E. RIBuild—Internal Insulation in Historic Buildings—Horizon 2020 Project. 2020. Available online: https://www. ribuild.eu/ (accessed on 28 September 2020).
    Paper not yet in RePEc: Add citation now
    
60. Hipin, Hipin Project—High Performance Insulation Based on Nanostructure Encapsulation of Air. 2019. Available online: http://www.hipin.eu/ (accessed on 29 December 2019).
    Paper not yet in RePEc: Add citation now
    
61. Ibrahim, M. Improving the Buildings Envelopes Energy Performance Using Aerogel-Based Insulating Mineral Rendering. Ph.D. Thesis, Ecole Nationale Supérieure des Mines de Paris, Paris, Frnace, 2014.
    Paper not yet in RePEc: Add citation now
    
62. ISO/TC 163/SC 2, ISO 10456: 2007; Building Materials and Products—Hygrothermal Properties—Tabulated Design Values and Procedures for Determining Declared and Design Thermal Values. ISO: Geneva, Switzerland, 2007.
    Paper not yet in RePEc: Add citation now
    
63. ISO/TC 61/SC 5, ISO 22007-2: 2015; Plastics—Determination of Thermal Conductivity and Thermal Diffusivity—Part 2: Transient Plane Heat Source (Hot Disc) Method. ISO: Geneva, Switzerland, 2015.
    Paper not yet in RePEc: Add citation now
    
64. Künzel, H.M. Simultaneous Heat and Moisture Transport in Building Components. In One- and Two-Dimensional Calculation Using Simple Parameters; IRB-Verlag Stuttgart: Stuttgart, Germany, 1995.
    Paper not yet in RePEc: Add citation now
    
65. Künzel, H.M.; Kiessl, K. Calculation of heat and moisture transfer in exposed building components. Int. J. Heat Mass Transf. 1996, 40, 159–167. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
66. Kehrer, M. Determination of Material Properties for Hygrothermal Calculation with WUFI; Munich, Germany, 2019. Available online: https://wufi.de/img_wufiforum/WUFI-Materialmessung_EN.pdf (accessed on 12 March 2023). Energies 2023, 16, 3048 31 of 33
    Paper not yet in RePEc: Add citation now
    
67. Kehrer, M.; Schmidt, T. Radiation effects on exterior surfaces. In Proceedings of the 8th Symposium on Building Physics in the Nordic Countries, Copenhagen, Denmark, 16–18 June 2008; DTU: Copenhagen, Denmark, 2008; pp. 207–212.
    Paper not yet in RePEc: Add citation now
    
68. Koebel, M.M.; Wernery, J.; Malfait, W.J. Energy in buildings—Policy, materials and solutions. MRS Energy Sustain. 2017, 4, E12. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
69. Krus, M. Moisture transport and storage coefficients of porous mineral building materials. In Theoretical Principles and New Test Methods; IRB-Verlag Stuttgart: Stuttgart, Germany, 1996.
    Paper not yet in RePEc: Add citation now
    
70. Krus, M.; Holm, A. Simple methods to approximate the liquid transport coefficients describing the absorption and drying process. In Proceedings of the Symposium on Building Physics in the Nordic Countries 1999, Göteborg, Sweden, 24–26 August 1999; pp. 241–248. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
71. Kumaran, M.K. Heat, Air, and Moisture Transfer in Insulated Envelope Parts: Final Report; Task 3: Material Properties; National Research Council Canada: Ottawa, ON, Canada, 1996.
    Paper not yet in RePEc: Add citation now
    
72. Latif, E.; Lawrence, M.; Shea, A.; Walker, P. Moisture buffer potential of experimental wall assemblies incorporating formulated hemp-lime. Build. Environ. 2015, 93, 199–209. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
73. Le, Q.X.; Dao, V.T.; Torero, J.L.; Maluk, C.; Bisby, L. Effects of temperature and temperature gradient on concrete performance at elevated temperatures. Adv. Struct. Eng. 2018, 21, 1223–1233. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
74. Lee, J.; Wi, S.; Chang, S.J.; Choi, J.; Kim, S. Prediction evaluating of moisture problems in light-weight wood structure: Perspectives on regional climates and building materials. Build. Environ. 2020, 168, 106521. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
75. Maia, J.; Ramos, N.M.M.; Veiga, R. A new durability assessment methodology of thermal mortars applied in multilayer rendering systems. Constr. Build. Mater. 2019, 222, 654–663. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
76. Maia, J.F. Durability of Thermal Rendering and Plastering Systems. Ph.D. Thesis, University of Porto, Porto, Portugal, 2019.
    Paper not yet in RePEc: Add citation now
    
77. Marwan, M. The effect of wall material on energy cost reduction in building. Case Stud. Therm. Eng. 2020, 17, 100573. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
78. Mendes, N.; Chhay, M.; Berger, J.; Dutykh, D. Numerical Methods for Diffusion Phenomena in Building Physics: A Practical Introduction; PUCPress: Curitiba, Brazil, 2016. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
79. Mensinga, P. Determining the Critical Degree of Saturation of Brick Using Frost Dilatometry. Master’s thesis, University of Waterloo, Waterloo, ON, Canada, 2009.
    Paper not yet in RePEc: Add citation now
    
80. Mňahončáková, E.; Jiřičková, M.; Pavlík, Z.; Fiala, L.; Rovnaníková, P.; Bayer, P.; Černý, R. Effect of Moisture on the Thermal Conductivity of a Cementitious Composite. Int. J. Thermophys. 2006, 27, 1228–1240. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
81. Nosrati, R.H.; Berardi, U. Hygrothermal characteristics of aerogel-enhanced insulating materials under different humidity and temperature conditions. Energy Build. 2018, 158, 698–711. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
82. Ojanen, T.; Viitanen, H.; Peuhkuri, R. Modelling of Mould Growth in Building Envelopes—Existing Models, Discussion on Improvement Aspects, Sensibility Analysis. In Proceedings of the Annex 41 ST4, Porto, Portugal, 22–24 October 2007.
    Paper not yet in RePEc: Add citation now
    
83. Palumbo, M.; Lacasta, A.M.; Giraldo, M.P.; Haurie, L.; Correal, E. Bio-based insulation materials and their hygrothermal performance in a building envelope system (ETICS). Energy Build. 2018, 174, 147–155. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
84. Park, J.H.; Kang, Y.; Lee, J.; Wi, S.; Chang, J.D.; Kim, S. Analysis of walls of functional gypsum board added with porous material and phase change material to improve hygrothermal performance. Energy Build. 2019, 183, 803–816. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
85. Pedroso, M. Eco-Efficient and Multifunctional Thermal Renders Based on Silica Aerogel and Fibres. Ph.D. Thesis, University of Lisbon, Lisbon, Portugal, 2021.
    Paper not yet in RePEc: Add citation now
    
86. Pedroso, M.; Flores-Colen, I.; Silvestre, J.D.; Gomes, M.G. Study on the thermal conductivity performance of cement-based composites incorporating natural organic fibres. In 39 th Cement and Concrete Science Conference 2019; Ball, R., Dams, B., FerrandizMas, V., Ke, X., Paine, K., Tyrer, M., Walker, P., Eds.; University of Bath: Bath, UK, 2019; pp. 112–115.
    Paper not yet in RePEc: Add citation now
    
87. Pedroso, M.; Flores-Colen, I.; Silvestre, J.D.; Gomes, M.G.; Silva, L.; Ilharco, L. Physical, mechanical, and microstructural characterisation of an innovative thermal insulating render incorporating silica aerogel. Energy Build. Energy Build. 2020, 211,
    Paper not yet in RePEc: Add citation now
    
88. Pedroso, M.; Flores-Colen, I.; Silvestre, J.D.; Gomes, M.G.; Silva, L.; Sequeira, P.; de Brito, J. Characterisation of a multilayer external wall thermal insulation system. Application in a Mediterranean climate. J. Build. Eng. 2020, 30, 101265. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
89. Peel, M.C.; Finlayson, B.L.; McMahon, T.A. Updated world map of the Köppen-Geiger climate classification. Hydrol. Earth Syst. Sci. 2007, 11, 1633–1644. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
90. Pina dos Santos, C.; Matias, L. ITE50—Thermal Transmittance of Building Envelope Elements, 1st ed.; LNEC: Lisbon, Portugal, 2006. (In Portuguese)
    Paper not yet in RePEc: Add citation now
    
91. Ramos, N.M.M.; Delgado, J.M.P.Q.; de Freitas, V.P. Influence of finishing coatings on hygroscopic moisture buffering in building elements. Constr. Build. Mater. 2010, 24, 2590–2597. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
92. Reuge, N.; Collet, F.; Pretot, S.; Moisette, S.; Bart, M.; Style, O.; Shea, A.; Lanos, C. Hygrothermal effects and moisture kinetics in a bio-based multi-layered wall: Experimental and numerical studies. Constr. Build. Mater. 2019, 240, 117928. [CrossRef] Energies 2023, 16, 3048 30 of 33
    Paper not yet in RePEc: Add citation now
    
93. Richardson, A.E. Freeze/thaw durability in concrete with fibre additions. Struct. Surv. 2003, 21, 225–233. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
94. Rode, C. Moisture Buffering of Building Materials—DTU BYG-Rapporter; No. R-126; Technical University of Denmark: Lyngby, Denmark, 2006.
    Paper not yet in RePEc: Add citation now
    
95. Rode, C.; Peuhkuri, R.; Time, B.; Svennberg, K.; Ojanen, T. Moisture Buffer Value of Building Materials. In Heat-Air-Moisture Transport: Measurements on Building Materials; ASTM International: West Conshohocken, PA, USA, 2009; p. 33-33-12. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
96. Rubel, F.; Kottek, M. Observed and projected climate shifts 1901-2100 depicted by world maps of the Köppen-Geiger climate classification. Meteorol. Zeitschrift. 2010, 19, 135–141. [CrossRef]
    Paper not yet in RePEc: Add citation now
    
97. Sedlbauer, K. Prediction of Mould Fungus Formation on the Surface of/and Inside Building Components; Universität Stuttgart: Stuttgart, Germany, 2001.
    Paper not yet in RePEc: Add citation now
    
98. Sedlbauer, K.; Krus, M. A new model for mould prediction and its application in practice. In 2nd International Building Physics Conference; Carmeliet, J., Hens, H., Vermeir, G., Eds.; CRC Press: Leuven, Belgium, 2003; pp. 276–282.
    Paper not yet in RePEc: Add citation now
    
99. SIA 180; Protection Thermique, Protection Contre L’humidité et Climat Intérieur Dans les Bâtiments. SIA: Zürich, Switzerland, 2014.
    Paper not yet in RePEc: Add citation now
    
100. Stahl, T.; Brunner, S.; Zimmermann, M.; Wakili, K.G. Thermo-hygric properties of a newly developed aerogel based insulation rendering for both exterior and interior applications. Energy Build. 2012, 44, 114–117. [CrossRef]
     Paper not yet in RePEc: Add citation now
     
101. Stahl, T.; Wakili, K.G.; Hartmeier, S.; Franov, E.; Niederberger, W.; Zimmermann, M. Temperature and moisture evolution beneath an aerogel based rendering applied to a historic building. J. Build. Eng. 2017, 12, 140–146. [CrossRef]
     Paper not yet in RePEc: Add citation now
     
102. Trechsel, H.R.; Bomberg, M.T. Moisture Control in Buildings: The Key Factor in Mold Prevention, 2nd ed.; ASTM International: Baltimore, MD, USA, 2009.
     Paper not yet in RePEc: Add citation now
     
103. Uidhir, T.M.; Rogan, F.; Collins, M.; Curtis, J.; Gallachóir, B.P.Ó. Improving energy savings from a residential retrofit policy: A new model to inform better retrofit decisions. Energy Build. 2020, 209, 109656. [CrossRef]
     Paper not yet in RePEc: Add citation now
     
104. Vajtai, R. (Ed.) Springer Handbook of Nanomaterials; Springer: Berlin/Heidelberg, Germany, 2013. [CrossRef]
     Paper not yet in RePEc: Add citation now
     
105. Wan, H.; Sun, Z.; Huang, G.; Xu, X.; Yu, J. Calculation of the maximum moisture buffering thickness of building wall layer of hygroscopic material. Build. Environ. 2019, 160, 106173. [CrossRef]
     Paper not yet in RePEc: Add citation now
     
106. Weber, S.-G. Technical Datasheet: Weberplast Decor Plus; 2019. (In Portuguese)
     Paper not yet in RePEc: Add citation now
     
107. Westgate, P.; Paine, K.; Ball, R.J. Physical and mechanical properties of plasters incorporating aerogel granules and polypropylene monofilament fibres. Constr. Build. Mater. 2018, 158, 472–480. [CrossRef]
     Paper not yet in RePEc: Add citation now
     
108. WTA. WTA-Merkblatt E 6-5-12/D: Innendämmung nach WTA II—Nachweis von Innendämmsystemen Mittels Numerischer Berechnungsverfahren, Germany; WTA: London, UK, 2012.
     Paper not yet in RePEc: Add citation now
     
109. Wu, Y.; Gong, G.; Yu, C.W.; Huang, Z. Proposing ultimate moisture buffering value (UMBV) for characterization of composite porous mortars. Constr. Build. Mater. 2015, 82, 81–88. [CrossRef]
     Paper not yet in RePEc: Add citation now
     
110. Yang, J.; Fu, H.; Qin, M. Evaluation of Different Thermal Models in EnergyPlus for Calculating Moisture Effects on Building Energy Consumption in Different Climate Conditions. Procedia Eng. 2015, 121, 1635–1641. [CrossRef]
     Paper not yet in RePEc: Add citation now
     

111. Yu, S.; Cui, Y.; Shao, Y.; Han, F. Research on the Comprehensive Performance of Hygroscopic Materials in an Office Building Based on EnergyPlus. Energies 2019, 12, 191. [CrossRef]

112. Zhang, H.; Yoshino, H.; Hasegawa, K. Assessing the moisture buffering performance of hygroscopic material by using experimental method. Build. Environ. 2012, 48, 27–34. [CrossRef]
     Paper not yet in RePEc: Add citation now
     
113. Zhang, M.; Qin, M.; Chen, Z. Moisture Buffer Effect and its Impact on Indoor Environment. Procedia Eng. 2017, 205, 1123–1129. [CrossRef]
     Paper not yet in RePEc: Add citation now
     
114. Zheng, R.; Janssens, A.; Carmeliet, J.; Bogaerts, W.; Hens, H. An evaluation of highly insulated cold zinc roofs in a moderate humid region—Part I: Hygrothermal performance. Constr. Build. Mater. 2004, 18, 49–59. [CrossRef]
     Paper not yet in RePEc: Add citation now
     

1. A Review of Phase-Change Material-Based Thermal Batteries for Sustainable Energy Storage of Solar Photovoltaic Systems Coupled to Heat Pumps in the Building Sector. (2025). Pearce, Joshua ; Rana, Shafquat.
   In: Energies.
   RePEc:gam:jeners:v:18:y:2025:i:13:p:3265-:d:1684849.

   Full description at Econpapers || Download paper

2. Implementing Seouls greenhouse gas management in buildings: Insights from the SICE model. (2025). Hwang, In Chang ; Baek, Jong-Rak ; Lee, Hyun-Jung ; Yi, Yoonhye.
   In: Energy Policy.
   RePEc:eee:enepol:v:198:y:2025:i:c:s0301421525000187.

   Full description at Econpapers || Download paper

3. Emergy analysis of applying a multi-generation system for building based on renewable energies for various weather conditions. (2024). Deymi-Dashtebayaz, Mahdi ; Tambulatova, Ekaterina ; Asadi, Mostafa ; Norani, Marziye ; Asach, Aleksei.
   In: Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development.
   RePEc:spr:endesu:v:26:y:2024:i:11:d:10.1007_s10668-023-03796-8.

   Full description at Econpapers || Download paper

4. Toward Prediction of Energy Consumption Peaks and Timestamping in Commercial Supermarkets Using Deep Learning. (2024). Gomez-Rosero, Santiago ; Zhao, Mengchen ; Nouraei, Hooman ; Zych, Craig ; Sadhu, Ayan.
   In: Energies.
   RePEc:gam:jeners:v:17:y:2024:i:7:p:1672-:d:1368282.

   Full description at Econpapers || Download paper

5. Interpretable Data-Driven Methods for Building Energy Modelling—A Review of Critical Connections and Gaps. (2024). , Patrick ; Manfren, Massimiliano ; Gonzalez-Carreon, Karla M.
   In: Energies.
   RePEc:gam:jeners:v:17:y:2024:i:4:p:881-:d:1338711.

   Full description at Econpapers || Download paper

6. Consequences of Non-Compliance with Technological Procedures in the Realisation of Construction Objects from the Point of View of Heat Consumption for Heating—A Case Study on Selected Construction Sites in the Slovak Republic. (2024). Mak, Peter ; Hlina, JN ; Astn, Patrik ; Pauloviov, Lucia.
   In: Energies.
   RePEc:gam:jeners:v:17:y:2024:i:23:p:5843-:d:1526594.

   Full description at Econpapers || Download paper

7. Experimental study on thermal performances of a solar chimney with and without PCM under different system inclination angles. (2024). Wang, Zhihao ; Li, Yongcai ; Huang, Sheng ; Zhu, Shaohui ; Lu, Jun.
   In: Energy.
   RePEc:eee:energy:v:290:y:2024:i:c:s036054422303548x.

   Full description at Econpapers || Download paper

8. Solar analysis for an urban context from GIS to block-scale evaluations. (2024). Berardi, Umberto ; Vecchi, Francesca.
   In: Energy Policy.
   RePEc:eee:enepol:v:184:y:2024:i:c:s030142152300469x.

   Full description at Econpapers || Download paper

9. Boosting green technology innovation in Chinas construction industry: The power of energy-consuming rights trading policy. (2024). Yang, Jie ; Li, Xingwei ; Shen, Qiong ; Yin, Wenjun ; Hao, Jiekuo ; Ding, Zuoyi ; Yao, Yuhong.
   In: Economic Analysis and Policy.
   RePEc:eee:ecanpo:v:84:y:2024:i:c:p:410-423.

   Full description at Econpapers || Download paper

10. Risk management in green building: a review of the current state of research and future directions. (2023). MacChion, Laura ; Nguyen, Hung Duy.
    In: Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development.
    RePEc:spr:endesu:v:25:y:2023:i:3:d:10.1007_s10668-022-02168-y.

    Full description at Econpapers || Download paper

11. Solutions for an Ecological and Healthy Retrofitting of Buildings on the Campus of the University of Oradea, Romania, Built Starting from 1911 to 1913. (2023). Bungau, Tudor ; Toadere, Mihaela Teodora ; Prada, Marcela Florina ; Prada-Hanga, Ioana Francesca ; Popescu, Daniela Elena.
    In: Sustainability.
    RePEc:gam:jsusta:v:15:y:2023:i:8:p:6541-:d:1121932.

    Full description at Econpapers || Download paper

12. Pro-Environmental Behaviors and Well-Being in Adolescence: The Mediating Role of Place Attachment. (2023). Servidio, Rocco ; Nappa, Maria Rosaria ; Bartolo, Maria Giuseppina ; Palermiti, Anna Lisa ; Costabile, Angela.
    In: IJERPH.
    RePEc:gam:jijerp:v:20:y:2023:i:10:p:5759-:d:1142442.

    Full description at Econpapers || Download paper

13. Thermophysical Parameters and Hygrothermal Simulation of Aerogel-Based Fibre-Enhanced Thermal Insulating Renders Applied on Exterior Walls. (2023). da Gloria, Maria ; Pedroso, Marco ; Silvestre, Jose Dinis ; Flores-Colen, Ines ; Hawreen, Ahmed.
    In: Energies.
    RePEc:gam:jeners:v:16:y:2023:i:7:p:3048-:d:1108633.

    Full description at Econpapers || Download paper

14. Improving the Energy Performance and Economic Benefits of Aged Residential Buildings by Retrofitting in Hot–Humid Regions of China. (2023). Chen, Zhuoxi ; Zou, Yukai ; Yang, Xiaolin ; Wan, Fengdeng.
    In: Energies.
    RePEc:gam:jeners:v:16:y:2023:i:13:p:4981-:d:1180503.

    Full description at Econpapers || Download paper

15. High-resolution estimation of building energy consumption at the city level. (2023). Huang, Zhou ; Liu, YU ; Zhou, Xiao ; Wang, Han ; Scheuer, Bronte.
    In: Energy.
    RePEc:eee:energy:v:275:y:2023:i:c:s0360544223008708.

    Full description at Econpapers || Download paper

16. Will informal environmental regulation induce residents to form a green lifestyle? Evidence from China. (2023). Wang, Shanyong ; Zheng, Qiaoqiao ; Song, Malin ; Li, Jun ; Wu, Jie ; Chen, Zexian.
    In: Energy Economics.
    RePEc:eee:eneeco:v:125:y:2023:i:c:s014098832300333x.

    Full description at Econpapers || Download paper

17. Hydroponic Green Roof Systems as an Alternative to Traditional Pond and Green Roofs: A Literature Review. (2022). Costanzo, Vincenzo ; Caponetto, Rosa ; Rapisarda, Renata ; Sciuto, Gaetano ; Nocera, Francesco.
    In: Energies.
    RePEc:gam:jeners:v:15:y:2022:i:6:p:2190-:d:772988.

    Full description at Econpapers || Download paper

18. Towards a Rigorous Consideration of Occupant Behaviours of Residential Households for Effective Electrical Energy Savings: An Overview. (2022). Lazarova-Molnar, Sanja ; Bouktif, Salah ; Ouni, Ali.
    In: Energies.
    RePEc:gam:jeners:v:15:y:2022:i:5:p:1741-:d:759035.

    Full description at Econpapers || Download paper

19. Energy-saving potential prediction models for large-scale building: A state-of-the-art review. (2022). Han, Xiaojing ; Ji, Wenjie ; Liu, Shuli ; Zhang, Shaoliang ; Ahmed, Abdullahi ; Zou, Yuliang ; Shen, Yongliang ; Yang, Xiu'e, .
    In: Renewable and Sustainable Energy Reviews.
    RePEc:eee:rensus:v:156:y:2022:i:c:s1364032121012557.

    Full description at Econpapers || Download paper

20. Tetra-Fish-Inspired aesthetic thermochromic windows toward Energy-Saving buildings. (2022). Xu, Qiyang ; Lu, QI ; Peng, Jinqing ; Liu, Hai ; Chen, Cong ; Feng, Chengchen ; Tan, Yutong ; Ke, Yujie ; Long, YI ; Wang, Tao.
    In: Applied Energy.
    RePEc:eee:appene:v:315:y:2022:i:c:s0306261922004512.

    Full description at Econpapers || Download paper

21. Limited Demand or Unreliable Supply? A Bibliometric Review and Computational Text Analysis of Research on Energy Policy in India. (2021). Goyal, Nihit.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:23:p:13421-:d:694856.

    Full description at Econpapers || Download paper

22. Impact of Tourist’s Environmental Awareness on Pro-Environmental Behavior with the Mediating Effect of Tourist’s Environmental Concern and Moderating Effect of Tourist’s Environmental Attachment. (2021). Ahmad, Zeeshan ; Hassan, Nadir Munir ; Khattak, Mohammad Nisar ; Moustafa, Mohamed A ; Fakhri, Mahendra.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:23:p:12998-:d:686662.

    Full description at Econpapers || Download paper

23. Factors Influencing the Sustainability of Wood-Based Constructions’ Use from the Perspective of Users. (2021). Kozlovska, Maria ; Vajlenka, Jozef.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:23:p:12950-:d:685789.

    Full description at Econpapers || Download paper

24. Retrofitting Building Envelope Using Phase Change Materials and Aerogel Render for Adaptation to Extreme Heatwave: A Multi-Objective Analysis Considering Heat Stress, Energy, Environment, and Cost. (2021). Alam, Morshed ; Sanjayan, Jay G ; Kumar, Dileep.
    In: Sustainability.
    RePEc:gam:jsusta:v:13:y:2021:i:19:p:10716-:d:644068.

    Full description at Econpapers || Download paper

25. Life Cycle Sustainability Assessment of a Novel Bio-Based Multilayer Panel for Construction Applications. (2021). Wietschel, Lars ; Francisco, Fernando Burgoa ; Thorenz, Andrea ; Leoncini, Andrea ; Barrio, Aitor.
    In: Resources.
    RePEc:gam:jresou:v:10:y:2021:i:10:p:98-:d:646411.

    Full description at Econpapers || Download paper

26. Social Network Analysis of Factors Influencing Green Building Development in China. (2018). Du, Qiang ; Huang, Ning ; Shao, Long ; Bai, Libiao ; Li, Jingtao ; Wang, Hailing.
    In: IJERPH.
    RePEc:gam:jijerp:v:15:y:2018:i:12:p:2684-:d:186244.

    Full description at Econpapers || Download paper

27. Will green building development take off? An exploratory study of barriers to green building in Vietnam. (2017). Zhang, Xiaoling ; Gray, Matthew ; Skitmore, Martin ; Nguyen, Hong-Trang ; Olanipekun, Ayokunle Olubunmi.
    In: Resources, Conservation & Recycling.
    RePEc:eee:recore:v:127:y:2017:i:c:p:8-20.

    Full description at Econpapers || Download paper

Report date: 2025-10-03 23:26:22 || Missing content? Let us know