Vim Cheat Sheet.pdf

Vim Cheat Sheet
Global
:h[elp] keyword - open help for
keyword
:sav[eas] file - save file as
:clo[se] - close current pane
:ter[minal] - open a terminal
window
K - open man page for word under the
cursor
Cursor movement
h - move cursor left
j - move cursor down
k - move cursor up
l - move cursor right
H - move to top of screen
M - move to middle of screen
L - move to bottom of screen
w - jump forwards to the start of a word
W - jump forwards to the start of a word
(words can contain punctuation)
e - jump forwards to the end of a word
E - jump forwards to the end of a word
b - jump backwards to the start of a word
B - jump backwards to the start of a word
ge - jump backwards to the end of a word
gE - jump backwards to the end of a word
% - move to matching character (default
supported pairs: '()', '{}', '[]' - use :h
matchpairs in vim for more info)
0 - jump to the start of the line
^ - jump to the first non-blank character
of the line
$ - jump to the end of the line
Editing
r - replace a single character.
R - replace more than one character, until
ESC is pressed.
J - join line below to the current one with
one space in between
gJ - join line below to the current one
without space in between
gwip - reflow paragraph
g~ - switch case up to motion
gu - change to lowercase up to motion
gU - change to uppercase up to motion
cc - change (replace) entire line
C - change (replace) to the end of the line
c$ - change (replace) to the end of the
line
ciw - change (replace) entire word
cw or ce - change (replace) to the end of
the word
s - delete character and substitute text
S - delete line and substitute text (same as
cc)
xp - transpose two letters (delete and
paste)
u - undo
U - restore (undo) last changed line
Ctrl + r - redo
. - repeat last command
Marking text (visual mode)
v - start visual mode, mark lines, then do
a command (like y-yank)
V - start linewise visual mode
o - move to other end of marked area
Ctrl + v - start visual block mode
O - move to other corner of block
Macros
qa - record macro a
q - stop recording macro
@a - run macro a
@@ - rerun last run macro
Cut and paste
yy - yank (copy) a line
2yy - yank (copy) 2 lines
yw - yank (copy) the characters of the
word from the cursor position to the start
of the next word
yiw - yank (copy) word under the cursor
yaw - yank (copy) word under the cursor
and the space after or before it
y$ - yank (copy) to end of line
p - put (paste) the clipboard after cursor
P - put (paste) before cursor
dd - delete (cut) a line
2dd - delete (cut) 2 lines
dw - delete (cut) the characters of the
word from the cursor position to the start
of the next word
diw - delete (cut) word under the cursor
daw - delete (cut) word under the cursor
and the space after or before it
D - delete (cut) to the end of the line
d$ - delete (cut) to the end of the line
x - delete (cut) character
Indent text
>> - indent (move right) line one
shiftwidth
<< - de-indent (move left) line one
shiftwidth
>% - indent a block with () or {} (cursor
on brace)
>ib - indent inner block with ()
Working with multiple files
:e[dit] file - edit a file in a new buffer
:bn[ext] - go to the next buffer
:bp[revious] - go to the previous buffer
:bd[elete] - delete a buffer (close a file)
:b[uffer]# - go to a buffer by index #
:b[uffer] file - go to a buffer by file
:ls or :buffers - list all open buffers
:sp[lit] file - open a file in a new buffer and split window
:vs[plit] file - open a file in a new buffer and vertically split window
:vert[ical] ba[ll] - edit all buffers as vertical windows
:tab ba[ll] - edit all buffers as tabs
Ctrl + ws - split window
Ctrl + wv - split window vertically
Ctrl + ww - switch windows
Ctrl + wq - quit a window
Ctrl + wx - exchange current window with next one
Ctrl + w= - make all windows equal height & width
Ctrl + wh - move cursor to the left window (vertical split)
Ctrl + wl - move cursor to the right window (vertical split)
Ctrl + wj - move cursor to the window below (horizontal split)
Ctrl + wk - move cursor to the window above (horizontal split)
Ctrl + wH - make current window full height at far left (leftmost vertical
window)
Ctrl + wL - make current window full height at far right (rightmost vertical
window)
Ctrl + wJ - make current window full width at the very bottom (bottommost
horizontal window)
Ctrl + wK - make current window full width at the very top (topmost
horizontal window)
Diff
zf - manually define a fold up to motion
zd - delete fold under the cursor
Please consider sponsoring this project!
Vim Cheat Sheet https://vim.rtorr.com/
1 of 3 04/10/2021, 15:48

g_ - jump to the last non-blank character
of the line
gg - go to the first line of the document
G - go to the last line of the document
5gg or 5G - go to line 5
gd - move to local declaration
gD - move to global declaration
fx - jump to next occurrence of character
x
tx - jump to before next occurrence of
character x
Fx - jump to previous occurence of
character x
Tx - jump to after previous occurence of
character x
; - repeat previous f, t, F or T movement
, - repeat previous f, t, F or T movement,
backwards
} - jump to next paragraph (or
function/block, when editing code)
{ - jump to previous paragraph (or
function/block, when editing code)
zz - center cursor on screen
Ctrl + e - move screen down one line
(without moving cursor)
Ctrl + y - move screen up one line
(without moving cursor)
Ctrl + b - move back one full screen
Ctrl + f - move forward one full screen
Ctrl + d - move forward 1/2 a screen
Ctrl + u - move back 1/2 a screen
Insert mode - inserting/appending text
i - insert before the cursor
I - insert at the beginning of the line
a - insert (append) after the cursor
A - insert (append) at the end of the line
o - append (open) a new line below the
current line
O - append (open) a new line above the
current line
ea - insert (append) at the end of the
aw - mark a word
ab - a block with ()
aB - a block with {}
at - a block with <> tags
ib - inner block with ()
iB - inner block with {}
it - inner block with <> tags
Esc - exit visual mode
Visual commands
> - shift text right
< - shift text left
y - yank (copy) marked text
d - delete marked text
~ - switch case
u - change marked text to lowercase
U - change marked text to uppercase
Registers
:reg[isters] - show registers
content
"xy - yank into register x
"xp - paste contents of register x
"+y - yank into the system clipboard
register
"+p - paste from the system clipboard
register
Marks and positions
:marks - list of marks
ma - set current position for mark A
`a - jump to position of mark A
y`a - yank text to position of mark A
`0 - go to the position where Vim was
previously exited
`" - go to the position when last editing
this file
`. - go to the position of the last change
in this file
`` - go to the position before the last
jump
:ju[mps] - list of jumps
>at - indent a block with <> tags
3== - re-indent 3 lines
=% - re-indent a block with () or {}
(cursor on brace)
=iB - re-indent inner block with {}
gg=G - re-indent entire buffer
]p - paste and adjust indent to current
line
Exiting
:w - write (save) the file, but don't exit
:w !sudo tee % - write out the
current file using sudo
:wq or :x or ZZ - write (save) and quit
:q - quit (fails if there are unsaved
changes)
:q! or ZQ - quit and throw away
unsaved changes
:wqa - write (save) and quit on all tabs
Search and replace
/pattern - search for pattern
?pattern - search backward for
pattern
vpattern - 'very magic' pattern: non-
alphanumeric characters are interpreted
as special regex symbols (no escaping
needed)
n - repeat search in same direction
N - repeat search in opposite direction
:%s/old/new/g - replace all old with
new throughout file
:%s/old/new/gc - replace all old
with new throughout file with
confirmations
:noh[lsearch] - remove
highlighting of search matches
Search in multiple files
:vim[grep] /pattern/
{`{file}`} - search for pattern in
multiple files
:cn[ext] - jump to the next match
:cp[revious] - jump to the previous
match
:cope[n] - open a window containing
za - toggle fold under the cursor
zo - open fold under the cursor
zc - close fold under the cursor
zr - reduce (open) all folds by one level
zm - fold more (close) all folds by one level
zi - toggle folding functionality
]c - jump to start of next change
[c - jump to start of previous change
do or :diffg[et] - obtain (get) difference (from other buffer)
dp or :diffpu[t] - put difference (to other buffer)
:diffthis - make current window part of diff
:dif[fupdate] - update differences
:diffo[ff] - switch off diff mode for current window
2 of 3 04/10/2021, 15:48

word
Ctrl + h - delete the character before
the cursor during insert mode
Ctrl + w - delete word before the cursor
during insert mode
Ctrl + j - begin new line during insert
mode
Ctrl + t - indent (move right) line one
shiftwidth during insert mode
Ctrl + d - de-indent (move left) line
one shiftwidth during insert mode
Ctrl + n - insert (auto-complete) next
match before the cursor during insert
mode
Ctrl + p - insert (auto-complete)
previous match before the cursor during
insert mode
Ctrl + rx - insert the contents of
register x
Ctrl + ox - Temporarily enter normal
mode to issue one normal-mode
command x.
Esc - exit insert mode
Ctrl + i - go to newer position in jump
list
Ctrl + o - go to older position in jump
list
:changes - list of changes
g, - go to newer position in change list
g; - go to older position in change list
Ctrl + ] - jump to the tag under cursor
the list of matches
:ccl[ose] - close the quickfix window
Tabs
:tabnew or :tabnew
{page.words.file} - open a file
in a new tab
Ctrl + wT - move the current split
window into its own tab
gt or :tabn[ext] - move to the next
tab
gT or :tabp[revious] - move to
the previous tab
#gt - move to tab number #
:tabm[ove] # - move current tab to
the #th position (indexed from 0)
:tabc[lose] - close the current tab
and all its windows
:tabo[nly] - close all tabs except for
the current one
:tabdo command - run the command
on all tabs (e.g. :tabdo q - closes all
opened tabs)
3 of 3 04/10/2021, 15:48

Vim Cheat Sheet.pdf

More Related Content

Similar to Vim Cheat Sheet.pdf (20)

Recently uploaded (20)

Vim Cheat Sheet.pdf