Assignment front sheet assignment 2
- 1. Assignment front sheet Learner name Assessor name Date issued Completion date Submitted on 01/10/2017 19/10/2017 Qualification Unit number and title BTEC Extended Certificate Level 2 Engineering Unit 1 : Working Safely and Effectively in Engineering Assignment title 1.2 Preparing for and carrying out an engineering activity In this assessment you will have opportunities to provide evidence against the following criteria. Indicate the page numbers where the evidence can be found. Criteria reference To achieve the criteria the evidence must show that the student is able to: Task no. Page numbers P5 Prepare for and carry out an engineering work activity 1 M1 Carry out a risk assessment on an engineering workplace to make recommendations on the safety of materials and equipment handling, use of personal protective equipment and the potential hazards in the area 2 M3 Identify how a work activity could be improved. 3 Learner declaration I certify that the work submitted for this assignment is my own and research sources are fully acknowledged. Learner signature: Date:
- 2. Assignment brief Unit number and title Unit 1 : Working Safely and Effectively in Engineering Qualification BTEC Extended certificate Level 2 Engineering Start date 01/10/2017 Deadline 19/10/2017 Assessor Assignment title 1.2 Preparing for and carrying out an engineering activity The purpose of this assignment is to: Be able to apply statutory regulations and organisational safety requirements Scenario The ability to work safely in an engineering environment is essential for the well-being of you and others. You are asked to prepare for and carry out two engineering activities from a given list. Preparation will entail carrying out a risk assessment of the selected work area or activity, identifying all safety procedures and any personal protective equipment (PPE) requirements. You are required to complete the documentation and report your findings with any suggested improvements. Task 1 Prepare for and carry out one of the following engineering activities. Identify PPE requirements and describe the safety procedures that must be observed when carrying out the selected engineering activities. (a) Manufacture a simple cast handled screwdriver (b) Drill holes in mild steel using a pedestal drill (c) Grind a point on a centre punch (d) Produce a welded joint (e) Use the lathe (f) Manual handling operation (g) Remove and refit an electrical or mechanical component. This provides evidence for P5 Task 2 Complete a risk assessment based on the Centre lathe in the workshop (prior to using the machine to face off the screwdriver handle). You may use the template design, which has been given to you. It should clearly state the following information. Your name and date of the risk assessment A description of the activity – How to use materials safely and handle equipment appropriately The hazards involved A hazard rating based on (i) the likelihood of a hazard occurring (ii) the severity of potential injury (iii) the identification of the risk factor This provides evidence for M1
- 3. Task 3 Once you have manufactured your chosen engineering activity submit a report using the template provided to include: • description of activity • PPE requirements • safety procedures • identification of what went well/wrong during the activity • suggested improvements. This provides evidence for M3 Sources of information This brief has been verified as being fit for purpose Assessor Signature Date Internal verifier Signature Date
- 4. Assessor's comments Qualification Assessor name Unit number and title Learner name Grading criteria Achieved? P5 Prepare for and carry out an engineering work activity M1 Carry out a risk assessment on an engineering workplace to make recommendations on the safety of materials and equipment handling, use of personal protective equipment and the potential hazards in the area M3 Identify how a work activity could be improved. Learner feedback Assessor feedback Action plan Assessor signature Date
- 5. Learner signature Date Observation record Learner name Qualification BTEC Extended certificate Level 2 Engineering Unit number and title Unit 1 : Working Safely and Effectively in Engineering Description of activity undertaken (please be as specific as possible) Candidate to identify PPE equipment and describe the safety procedures that must be observed when drilling a hole, using the pillar drill, into a piece of mild steel. An awareness of safety requiremnets in the workshop is needed. Assessment and grading criteria How the activity meets the requirements of the assessment and grading criteria DT workshop – Room 0.61 – Discussion/Practical. P5 – Identify the PPE requirements when drilling a hole in Mild Steel. Learner signature Date Assessor signature Date Assessor name Neil Owen
- 6. Witness statement Learner name Qualification BTEC Extended certificate Level 2 Engineering Unit number and title Unit 1 : Working Safely and Effectively in Engineering Description of activity undertaken (please be as specific as possible) Candidate to construct a Mild Steel Screwdriver using a pedestal drill to produce a hole in the handle. The whole must fit a 5mm rod of Mild Steel and must stay in place. Assessment and grading criteria How the activity meets the requirements of the assessment and grading criteria, including how and where the activity took place P5 – Prepared and carried out a hole in Mild Stee l using a Pedestall Drill (Pillar Drill). Witness name Job role Witness signature Date Learner signature Date Assessor name Neil Owen. Assessor signature Date
- 7. Witness statement Learner name Qualification BTEC Extended certificate Level 2 Engineering Unit number and title Unit 1 : Working Safely and Effectively in Engineering Description of activity undertaken (please be as specific as possible) Candidate to construct a Mild Steel Screwdriver using a pedestal drill to produce a hole in the handle. The whole must fit a 5mm rod of Mild Steel and must stay in place. Assessment and grading criteria How the activity meets the requirements of the assessment and grading criteria, including how and where the activity took place P5 – Prepared and carried out a hole in Mild Stee l using a Pedestall Drill (Pillar Drill). Witness name Job role Witness signature Date Learner signature Date Assessor name Neil Owen. Assessor signature Date