icmctt PPT Template (1).pptx

Third International Conference in Modern Computing trends
and Technology 2023
ICMCTT 2023
Organised by
Organized by Kristu Jyoti College of Management & Technology, Chethipuzha, Kerala, India &
RSP Conference Hub, KCT Tech Park, Saravanampatti, Coimbatore, Tamilnadu, India
Date : 26/07/2023 & 27/07/2023
Paper Title : Experimental Investigation of effect of size of the tool electrode on
Metal Removal Rate
Presented by
Mr.V.S.kumar,
Student - UG/ PG
JHK University,
Kolkatta
Authors Details
Mr.V.S.kumar,
Ms.H.Pooja
Student - UG/ PG
JHK University,
Kolkatta
Paper Id :
Presenter Category : UG / PG /Research Scholar / Faculty
Paper ID : 2208 Category : UG / PG / RS / Faculty

Key talking
points
• Abstract
• Introduction
• Literature Review
• Methodology
• Experiments / Analysis / Simulation etc
• Results & Discussion
• Conclusion
PRESENTATION FRAMEWORK

ABSTRACT
• Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem
Ipsum has been the industry's standard dummy.
• text ever since the 1500s, when an unknown printer took a galley of type and
scrambled it to make a type specimen book. It has survived not only five centuries,
but also the leap into electronic typesetting.
• remaining essentially unchanged. It was popularised in the 1960s with the release of
Letraset sheets containing Lorem Ipsum passages.
• and more recently with desktop publishing software like Aldus PageMaker including
versions of Lorem Ipsum.

Introduction
Ipsum has been the industry's standard dummy.
• text ever since the 1500s, when an unknown printer took a galley of type and
scrambled it to make a type specimen book. It has survived not only five centuries,
but also the leap into electronic typesetting.
• remaining essentially unchanged. It was popularised in the 1960s with the release of
Letraset sheets containing Lorem Ipsum passages.
• and more recently with desktop publishing software like Aldus PageMaker including

Literature
Review
Ipsum has been the industry's standard dummy text ever since the 1500s.
• when an unknown printer took a galley of type and scrambled it to make a type
specimen book. It has survived not only five centuries, but also the leap into
electronic typesetting, remaining essentially unchanged.
• It was popularised in the 1960s with the release of Letraset sheets containing
Lorem Ipsum passages, and more recently with desktop publishing software like
Aldus PageMaker including versions of Lorem Ipsum.
• It has survived not only five centuries, but also the leap into electronic
typesetting, remaining essentially unchanged. It was popularised in the 1960s
with the release of Letraset sheets containing Lorem Ipsum passages, and more
recently with desktop publishing software like Aldus PageMaker including

Methodology

GRAPHS / TABLES / ANALYSIS / SIMULATION ETC
Sales
1st Qtr 2nd Qtr 3rd Qtr 4th Qtr
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Category 1 Category 2 Category 3 Category 4
Chart Title
Series 1 Series 2 Series 3

Photographs / Simulation Pictures / Video Etc
relevant to the Experiment
Note : Don’t add Pictures from Internet source or from others work

REFERENCES
[1] Assael. M, Metaxa. I, Kakosimos. K, and Constantinou. D, "Thermal conductivity of nanofluids–
experimental and theoretical," International Journal of Thermophysics, vol. 27, pp. 999-1017, 2006.
[2] Asiltürk. I and Akkuş. H, "Determining the effect of cutting parameters on surface roughness in
hard turning using the Taguchi method," Measurement, vol. 44, pp. 1697- 1704, 2011.
[3] Bhattacharya. A, Das. S, Majumder. P, and Batish. A, "Estimating the effect of cutting parameters
on surface finish and power consumption during high speed machining of AISI 1045 steel using
Taguchi design and ANOVA," Production Engineering, vol. 3, pp. 31-40, 2009.
[4] Cus. F and Balic. J, "Optimization of cutting process by GA approach," Robotics and Computer-
Integrated Manufacturing, vol. 19, pp. 113-121,2003.
[5] Chien. W.-T and Tsai. C.-S, "The investigation on the prediction of tool wear and the
determination of optimum cutting conditions in machining 17-4PH stainless steel," Journal of
Materials Processing Technology, vol. 140, pp.340-345, 2003.

Thank you
Special Mentions (if any)

icmctt PPT Template (1).pptx

More Related Content

Similar to icmctt PPT Template (1).pptx (20)

More from Sanjay Kumar (7)

Recently uploaded (20)

icmctt PPT Template (1).pptx