14 touch panel controlled motor speed and direction control system
- 1. VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874 VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874 Touch panel Controlled Motor Speed and Direction Control System Abstract: The present project deals embedded technology in industrial management area. The present system working is very tedious process to control the motor speed by selecting mentioned path in touch panel. This total procedure will be build up by using embedded system with embedded technology. By using embedded technology we can control the device. Here we developed one touch technology, it is very useful in industrial management by touch particular mention place of the touch pad, touch specified place then enter to control the motor speed. Motor speed and direction control through touch panel by selecting the specified mentioned path in touch panel. By using this technology we can protect from short circuit in heavy machines operating process. The system uses a compact circuitry built around Flash version of Atmel microcontroller with a non-volatile memory capable of retaining the password data for over ten years. Programs are developed in embedded C. ISP is used to dump the code into the microcontroller This project uses regulated 5v, 750ma power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/18v step down transformer.
- 2. VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874 VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874 Block Diagram: POWER SUPPLY: Controller Touch panel Motor driver Motor POWER SUPPLY RegulatorStep down transformer Rectifier Filter Reset LCD DISPLAY
- 3. VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874 VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874 Hardware Requirements: Transmitter: 1. Microcontroller 2. Power supply 3. Touch panel 4. Max232 5. Lcd module 6. Motor driver 7. Motor Software Requirements: 1. KEIL Software 2. RIDE Software
- 4. VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874 VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874 Advantages: 1. Low cost, 2. automated operation, 3. Low Power consumption. Applications: 1. Industrial management 2. Home applications