Advantage Base Z Data Sheet Print
- 1. advantage base z base Z laser fume extraction systems For use with the Epilog Zing Laser Engraver. advantage The Advantage Base Z has been designed specifically for the new Epilog Zing laser engraver. The dimensions of the unit allow the Zing to fit perfectly onto the extractor, effectively doubling it up as a work station. The distinctive blue finish has been matched with the blue ends of the laser to give a stylish installation. The unit is also offered with an onboard air compressor to provide the laser its air assist requirements. All units come complete with extraction hose kit and compressor link up on compressor models. • Noise Level less than 55dBa for use with the epilog Zing laser engraver • Low cost replacement filters • Stylish colour match with Zing • On Board compressor versions • Comes complete with extraction hose kit • Reverse flow filter technology part numbers Model Part Number VOC Monitoring Compressor AD Base Z 230v L1542A A2003 A2007 115v L1541A Other Hose Kits are available. All of the above units are fitted with our standard filter combinations. For specific applications please call us for details. replacement filters* Model Pre Filter Combined Filter AD Base Z A1030045 A1030050 * Other Filters are available. Please call us for details.
- 2. base Z technical data Model AD Base Z EC US Dimensions (hxwxd) 770 x 760 x 560mm 30.3 x 29.9 x 22” Weight 65kg 143lbs Cabinet Construction Powder coated mild steel Powder coated mild steel advantage Blower 200m3/hr 117cfm Electronics 230v 50/60Hz Full load current: 3.7 amps 115v 50/60Hz Full load current: 1.2 amps filter specifications pre filter combined filter Filter Media Glass Fibre Glass Fibre, Activated Carbon 9kg Surface Area 12m2 2m2 Construction 2 Stage Maxi Pleat Metal Case Housing MDPE Moulding Mild Streel Efficiency EU8 (95% @ 0.8 microns) H13 (99.997% @ 0.3 microns) Multiple Gas pre filter combined filter 320mm 320mm 320mm 230mm 75mm 610mm 320mm 340mm 340mm *Other Filters are available. Please call us for details. hose kit connection technical specification for use with the epilog Zing laser engraver 1. Unit/Filter Condition Display 2. On/Off Switch 3. Motor Cooling In/Out 4. Compressor Cooling Inlet 5. Exhaust Inlet Connection 75mm 6. Exhaust Outlet 7. Power Cable 8. Compressed Air Outlet 10. Filter Compartment Door Latches 11. Castors 12. Door Hinges 13. Machine Identification 2 1 5 7 4 8 3 6 COMBINED 10 12 PRE FILTER 13 11 FRONT BACK SIDE Part Number : A1020020 advantage base z 1 1. m 100mm Flexible Hose 5 2 head office Connection Cuffs usa office 21-22 balena close bofa americas authorised agent creekmoor 1395 south hackman street industrial estate staunton, poole, dorset, uk illinois, usa bh17 7dx 62088 t. +44 (0) 1202 699 444 t. (618)-635-4465 f +44 (0) 1202 699 446 . f (618)-635-2695 . e. sales@bofa.co.uk e. sales@bofaamericas.com w. www.bofa.co.uk w. www.bofaamericas.com bofa are dedicated to continuall improving our products. therefore specifications may change without notice. y