ENHANCING CYBER SECURITY OF ONLINE ACCOUNTS VIA A NOVEL PROTOCOL AND NEW TECHNIQUES

International Journal of Network Security & Its Applications (IJNSA) Vol.9, No.3, May 2017
DOI: 10.5121/ijnsa.2017.9302 11
ENHANCING CYBER SECURITY OF ONLINE
ACCOUNTS VIA A NOVEL PROTOCOL AND NEW
TECHNIQUES
Mehrdad Nourai and Haim Levkowitz
Computer Science Department, University of Massachusetts Lowell, Lowell, MA, USA
ABSTRACT
The financial world has gotten more sophisticated. People need to make informed financial decisions, so
they seek out efficient tools to help them manage their finances. Traditionally, money management software
has been available for individuals to use in their homes on their personal computers. These tools were a
local install, often expensive, and required a learning curve to use them effectively. With a paradigm shift
to cloud computing and storage, users are looking for inexpensive alternatives that are accessible at home
or on their mobile devices. As a result, third-party companies have been forming over the last few years to
meet this need. However, to access the functionality of these online resources, users are required to divulge
their personal financial account login credentials. While third-party companies claim that subscribers’
private information is safely stored on their servers, one cannot ignore the fact that hackers may be able to
break into their system to steal users’ information. Once hackers manage to compromise users’ login
credentials, they have complete control over their accounts. Therefore, there is a need to have a holistic
approach that incorporates security elements to protect users’ accounts from hackers.
We present a novel, holistic model with a new handshake protocol and online account access control,
which authenticate account access and form a sandbox around third-party access to users’ accounts. When
utilizing these novel techniques, users’ login credentials can remain private, providing safeguards against
unauthorized transactions on their accounts.
KEYWORDS
Cyber Security, Network Protocols, SSL, Cryptography, PKI
1. INTRODUCTION
In today’s fast-paced world, personal financial accounts are accessible online, and often they tend
to be with a different institution. When one needs to figure out their net worth or track what is
happening with their money, they start by logging into each of their accounts individually. The
user must be able to remember their login credentials for each account. Ideally, for good security
practices, each account should have unique login credentials. However, as a convenience, users’
may use one set of credentials for most (if not all) of their accounts. Once the user logs into their
account, they need to download account information in the proper format and import it to local
install financial software (e.g., Intuit Quicken). Although the use of these tools is an improvement
over tracking financial details by hand, this process can be tedious, time-consuming, and may
become overwhelming for users that are not familiar with the world of finances or computers.
There are usability issues and inconveniences with locally installed applications. For instance,
software localized to one computer requires maintenance and updating to avoid security
vulnerabilities. The lack of mobile accessibility is also prohibitive for today’s world where
everyone is in a state of perpetual motion. Also, frequent redesign of the software creates
confusion and frustration over new interfaces and functionality for new editions of the software.
This model has a steep learning curve, and although it may have been a sufficient form of
financial aggregation years ago, it is no longer the case. Thus, it is not surprising that users are
migrating to online tools for managing their personal finances.

12
New independent online companies are emerging that have no relationship with financial
institutions to offer their financial aggregation tools to users. In this paper, we refer to such
enterprises as “third-party companies.” The idea behind these businesses is to provide a set of
budgeting features that were previously offered by the locally installed financial software, but
with the added advantage of the third-party doing all the work for little to no cost. For third-party
companies to provide these services, they need to login to users’ online accounts to read and
collect information. These third-party companies utilize algorithms when they critically examine
account transactions, net worth, and other details. As a result, they create an aggregate report that
presents an analysis of accounts’ information in a graphical or a textual manner. Users prefer the
method of automatically gathering and aggregating account information rather than the old
practices, which required them to perform all the work themselves.
Although an online budgeting tool is a convenient and affordable tool, some users may shy away
from using it. Users have security concerns or feel vulnerable when they sign up for such a
service. The vulnerability begins when users give their private accounts’ login credentials to
third-party companies. If an attacker manages to compromise a third-party’s network, they have
the entire financial lives of all users in their hands. This security vulnerability is due to the fact
that when someone logs into an account, they are able to do everything that the owner of the
account can do there. That is, the breach extends past viewing personal information to the ability
to perform transactions on the account as well. The main idea of this paper is to introduce a novel
and holistic login architecture and a new sandboxing technique for securing online accounts by
providing an entirely new separate set of login credentials with lower permissions for third-party
utilizations. We explain precisely the proposed techniques, which can protect online accounts
from potential fraudulent activity when users utilize services offered by third-party companies.
The main contributions of this paper are:
• To introduce a new handshake protocol for use by third-party companies to authenticate
access to users’ online accounts (discussed in Section 4.2).
• To introduce a new granular access control layer sandbox techniques for fine-grained
access to users’ online accounts (discussed in Section 7.4).
2. EXISTING PRACTICES AND INFRASTRUCTURE SHORTCOMINGS
We now discuss the present practices and their weaknesses, which create cyber security
vulnerability for users.
2.1. USER AUTHENTICATION VIA USERNAME AND PASSWORD
For financial institutions to provide a secure online mechanism for their customers to access their
accounts, financial institutions utilize the HTTPS (HTTP over SSL) protocol, which can be used
via a web browser to access their account. The current process is as follows: the user opens a web
browser on their computer, types in “https://” followed by the website address of their financial
institution. Once the user hits the Enter key, the communication between the user’s computer (the
client) and the financial institution’s computer (the server) starts. The communication first
establishes a secure channel between the client and the server by utilizing encryption techniques
and the SSL handshake protocol, and then HTTP commands can flow in the secure channel. The
server can now send the home page to the client, which may contain an area within the page to
obtain the customer’s login credentials or may have a sign-in link to open a login page. The
mechanism used for inputting the account credentials utilizes HTML FORM INPUT tags via the
POST method.

13
When the home or login page opens in the browser, it provides two textboxes, one for the
username and one for the password plus a sign-in button (e.g., Figure 1). Once the user inputs
the necessary fields and clicks the sign-in button, the server starts the user authentication process.
Figure 1. An example of a financial institution’s home page
The financial institutions’ server converts the customer’s password into a custom hash value
using the same algorithms they used at sign-up to create the original hash value. The server then
checks the hash values for a match. If the hash values are matched, the server allows access to the
customers’ account; otherwise, the server is likely to display an error message after a failed login
attempt. Based on the financial institution’s policy, the server may allow a few more attempts
before locking the account to protect it from attackers.
2.2. DEVICE VERIFICATION
In addition to the process of checking users’ password as a means of authentication, financial
intuitions often ask for other forms of verification. Especially when the user is attempting to log
into their account from a device that they have not used before with their account. The extra
authentication step involves one or more security questions that the user had already provided
answers to when they first set up their account’s credentials. The extra verification is an added
security measure to ensure that even if an attacker has obtained the password, the attacker has to
overcome another layer of security before being able to gain access to the account.
The technology often used for the user’s device verification is via the browser’s cookies (e.g.,
Figure 2). Cookies are small text files that are stored on the user’s computer to save specific
information related to the use of a particular website. This is because the web is a stateless
medium; hence, cookies are the most popular way to keep track of information while users

14
browse a website. Financial institutions utilize cookies and use them to save specific information
on users’ devices to verify that the access is coming from the account’s real owner rather than an
attacker trying to gain access to someone’s account.
Figure 2. An example of a new device verification
2.3. VARIATIONS IN AUTHENTICATION
With the current practices, there are variations to the authentication steps, and not all financial
institutions follow a standard mechanism for authenticating their users’ access. For instance,
some may display a predefined image for identification of the legitimate versus a fake website
that was made to look like their financial intuition’s website. Others may ask for the username on
the home page but not password at first, until the user clicks the Sign-in, Continue, or Next
button. There is also a second authentication process utilizing a code that is delivered via email,
text message, or a mobile app. In general, the extra authentication steps may consist of some other
information that the owner of the account knows in addition to their password, which enables
financial institutions to perform additional security measures before allowing access to an
account. Therefore, a hacker would have to break down at least two barriers to gain access to the
account. While this process works well in practice, developers designed it for humans’
capabilities, not for machines. Hence, financial institutions had to make their interfaces easy
enough for human use, while appealing to the masses that use online services. That is, current
login credentials are safe enough but not too cumbersome to become an inconvenience for users
to circumvent the intended security.

15
2.4. CURRENT INFRASTRUCTURE SHORTCOMINGS
The present infrastructure of online accounts lacks the mechanisms to support a different form of
account authentication with restrictive access. As a result, users are giving their personal access
credentials to third-party companies to utilize the financial services they provide. Ever-increasing
cyber security threats, coupled with existing industry practices make users vulnerable to cyber
criminals. Current practices have created a challenging and engaging problem that needs to be
solved to keep users safe from potential cyber-attacks.
The following is a list of possible problems with the current infrastructure:
• Users are making themselves vulnerable by giving their complete credentials in the form
of username/password plus security questions and answers to third-party companies.
• Users’ credentials are designed to be private and not shared with others.
• Once users’ credentials are given to a third-party company, they are stored on their
server, which may be exposed to an attacker.
• Users may use the same username/password for other accounts and in other places and, as
a result, hacked or stolen credentials can be used to access multiple accounts.
• Current bank accounts are full access accounts and, as a result, once a third-party
company has access to these accounts, they can perform transactions on that account.
• Financial institutions are not the only companies that always allow full access to online
account once users enter their security credentials. Therefore, other online accounts that
users share with third-party companies may be at risk to cyber-attacks.
3. NETWORKING INFRASTRUCTURE
In this section, we discuss the foundation of the networking infrastructure that our new protocol
utilizes to deliver the needed security.
3.1. SECURE CHANNEL
Secure channels between two parties are required when the transmitted information is sensitive
and private while traveling over an insecure medium (e.g., the Internet). In the next section, we
discuss the current practice referred to as SSL, which secure a channel for private
communications.
3.2. SECURE SOCKETS LAYER
The SSL (Secure Sockets Layer) protocol is a secure connection technology used on the Internet
for securing communications between a client and a server. SSL has been updated and renamed
TLS (Transport Layer Security). Although TLS is the next generation of its predecessor, SSL, the
term SSL is prevalent, and therefore it is used throughout this document.
The SSL protocol was originally developed by Netscape Communications in 1994 to address
security issues of communicating via the Internet [1]. The protocol was a revolutionary
technology for securing Internet traffic that carried personal or sensitive information. SSL is over
two decades old and has evolved over time to be more secure. The SSL architecture continues to
change over time as new SSL vulnerabilities are found, computers become faster, and demands
for tighter security increases. The workings of SSL depend on trust models provided by
Certificate Authorities (CA) and public key infrastructure that is based on cryptography. The SSL
underlying mechanisms protect the transmitted information’s integrity and security by providing

16
authentication of the server to the client, and optional authentication of the client to the server.
Although SSL has several security features built-in, it is not immune to cyber-attacks (discussed
in Section 8.2). The new proposed protocol leverages SSL and its ability to secure the
communications between the client and the server without any changes to this layer.
3.3. TRANSPORT LAYER
The Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) are located in the
transport layer. TCP is a connection-oriented protocol and has three-way handshakes (Figure 3) to
establish a connection between the client (Initiator) and the server (Receiver). TCP is the most
reliable and prevalent protocol on the Internet because it guarantees packet delivery, ordering, and
congestion control. UDP is a connection-less protocol that does not guarantee packet delivery or
ordering; it is typically used for streaming applications. TCP, along with the IP layer, make up the
TCP/IP protocol, which we use as our transport layer protocol. The only change in this layer is a
minor one, where TCP flags might be set to flush out the packets.
Figure 3. TCP/IP Three-Way Handshake
3.4. SECURE VERSUS INSECURE NETWORK PORTS
The TCP and UDP transport layer protocols have 65535 ports each. The Internet Assigned
Numbers Authority (IANA) assigns the ports for specific protocols and general use [2]. Although
some ports are used for secure protocols, there are no “secure” or “insecure” port numbers. The
traffic that flows through any network port can be encrypted or in clear text. Hence, it is up to the
underlying protocol to use them as “secure” or “insecure” ports. Nevertheless, there are benefits
in standardizing assignments of default ports for “secure” or “insecure” traffic. The assignment
can reduce the confusion or errors in using certain common ports for secure communications
while setting up firewall rules.

17
4. APPLICATION LAYER PROTOCOLS
In this section, we discuss the current HTTPS and its issues and then present our new HTTPAS
protocol, which addresses security concerns of current practices when used with third-party
companies.
4.1. HTTPS PROTOCOL
The Internet is an open and insecure medium for communication. When a connection between a
client machine and a server is established, all the information transferred over the Internet is
traveling over an insecure connection. This information can be intercepted and be seen by others.
Therefore, sensitive information (e.g., username/password, bank account information, medical
records) must be protected while the information is in transit. The Hypertext Transfer Protocol
(HTTP) that is primarily used for accessing information via the web moves data in clear text,
which makes it vulnerable to an attacker. To protect data going between a client and a web server,
a protocol called HTTPS is used. HTTPS consists of HTTP over the SSL protocol, which
encrypts and secures the communication to protect it while in transit [3]. The HTTPS protocol
works flawlessly behind the scene, and it performs its tasks without user intervention unless
something goes wrong with the connection. When HTTPS finds an issue with the connection, it
alerts the user and allows the user to decide on the next step. When a user accesses a website
using HTTPS with their browser, and if it supports the HTTPS protocol, a green lock icon is
shown as part of the link in the browser. Once the lock is clicked, information about the security
and connection are displayed. For instance, details can show the connection information as TLS
1.2 AES_256_GCM RSA (2048), which is the version and cryptography specifications of the
connection. The HTTPS protocol was designed for human-to-computer interactions to secure
sensitive online web activity while users are accessing their online account. The HTTPS protocol
can be kept as is, and still be used when humans need to access their accounts. In the next section,
we introduce a new, novel protocol, which is suited for computer-to-computer communications.
4.2. INTRODUCING THE NEW HTTP AS PROTOCOL
While HTTPS was designed for human-to-computer interactions, for greater cyber security
another protocol is needed for computer-to-computer interactions. We have designed a new,
novel Application Layer Protocol called HTTPAS for computer-to-computer interactions.
HTTPAS’s architecture consists of HTTP with a new Authentication Handshake Protocol (AHP)
over SSL. This new protocol utilizes SSL to secure the communication channel between a third-
party’s computer and a financial institution’s web server. The novel protocol uses the new AHP
for the two computers to negotiate and authenticate secure access to users’ accounts. The
motivations for a new protocol are flexibility, extra security, and custom enhancements that the
current HTTPS does not offer. The HTTPS protocol was designed to be a general multipurpose
protocol for providing secure communication channel on the web. This protocol is often used for
human-to-computer communications, which require more conveniences for a human user.
Therefore, security versus convenience for the human user was the compromising factor.
The new, novel HTTPAS protocol closes this gap by offering a feature set that is well suited for
computer-to-computer communications. This protocol can also be adapted for human-to-
computer communication, however, due to extra security steps, it would require more efforts on
the human side. Our new approach increases the security to another dimension, which utilizes a
public key infrastructure (PKI) framework to enhance and improve the security of the protocol.

18
This method can eliminate the need for third-party companies to request and use a user’s
username and password combination plus other login credentials while offering extra and better
security not found in current practices. We explain components of this new protocol (discussed in
Section 5) in details later in the paper.
Figure 4. The TCP/IP stack with the new HTTPAS and the new authentication handshake protocol
The diagram in Figure 4 shows HTTPAS within the realm of the TCP/IP network stack. The new
protocol consists of new Authentication Handshake Protocol (AHP) (discussed in detail in
Section 5). The AHP protocol authorizes the client’s computer and authenticates access to users’
accounts. Like HTTPS, the new HTTPAS protocol uses SSL as its foundation for a secure
communication channel. Using existing SSL protocol reduces or minimizes the risk of
introducing new vulnerabilities. Utilizing existing proven technology as the foundation of the new
protocol is consistent with security practices and philosophy of some researchers that may argue
that creating new cryptography may introduce new vulnerabilities.
The following are the benefits of using HTTPAS for third-party access:
• The solution we are envisioning would result in better security practices that address
concerns of existing and potential new users. The existing users get the better security.
The new users that were hesitant to sign-up with a third-party due to security issues of
such services can now be sure that the third-party cannot perform any transactions on
their accounts. Having better cyber security can potentially increase the size of the user
base utilizing third-party services, which can benefit all parties involved, i.e., users,
banks, and third-party companies.
• Users’ don’t have to give their banking credentials, which can be in the form of
username/password plus security questions and answers to a third-party site, i.e., their
credentials which are meant to be private, can stay private and not shared. Instead, the

19
third-party can utilize the new handshake protocol and access control for accessing users’
accounts.
• Often users have the same username/password for more than one online account. As a
result, once an attacker steals their credentials from a third-party’s server, then the
attacker can get access to those accounts in other places, which can become a major
security issue for the users.
• The solution is not limited to banking websites, as it can be adapted for online accounts,
such as email, which utilizes usernames/passwords for their authentication. A third-party
company can access these accounts on a read-only basis.
• If an attacker compromises a third-party’s server and access information is stolen, the
attacker cannot perform transactions on the account. Also, the bank and the owner of the
account can easily revoke the access and generate a new access protocol, which can be
safer and more convenient than with current practices.
4.3. PORT NUMBERS
To place the separation of traffic between the current and the new protocol, as well as minimize
or eliminate any changes to the existing protocols, HTTPAS uses a different TCP/IP port number
than HTTPS. The current application layer TCP/IP protocol port assignments for existing
application protocols have been designated by IANA, which are as follows: port 80 for HTTP and
port 443 for HTTPS. The new HTTPAS protocol does not currently have a designated port
assignment. Hence, in the interim, we use default port 10443 which according to the IANA online
registry search tool, has not officially been assigned to any protocol.
5. NEW AUTHENTICATION HANDSHAKE PROTOCOL
The new Authentication Handshake Protocol (AHP) utilizes public key infrastructure (PKI)
framework, TCP/IP as its transport layer and SSL as its transport layer security for its underlying
mechanisms. AHP is the main component and workhorse behind the new HTTPAS protocol and
is responsible for authorizing and authenticating the access to users’ accounts. In this section, we
now describe the precise details of the new protocol.
5.1. CIPHER SPECIFICATION
As mentioned in the last section, we use the secure communication channel that SSL provides as
the foundation of a secure connection. SSL negotiates Cipher Spec between client and server.
Therefore, for performance reasons, we leverage the negotiated Cipher Spec to minimize
unnecessary handshakes between the client and the server.
5.2. SEQUENCE OF EVENTS
AHP is responsible for the following sequence of Events:
• Negotiate AHP version to use for the handshake
• Obtain user account id that the client is requesting access for
• Obtain the client’s computer certificate and public key
• Verify the client’s computer certificate with certificate authorities
• Verify the user account has been authorized for access from the client’s computer
• Authenticate the access utilizing challenge/response and pass-phrase
• Grant or deny access to user’s account

20
Figure 5. Authentication Handshake Protocol (AHP) Sequence Diagram
5.3. SEQUENCE DIAGRAM
The diagram in Figure 5 shows the new AHP handshake protocol between the client and the
server. It also shows its placement within the timeline of the TCP and SSL handshake protocols
which are needed for healthy and secure connection. The new handshake consists of several
command components as follows:
• AuthRequest
• AuthAck
• AuthAccount
• AuthChallenge
• AuthResponse
• AuthComplete
We now describe each of the new handshake’s elements in detail.
5.3.1. AUTHREQUEST
The first step of the new AHP handshake protocol is AuthRequest command. This action occurs
right after completion of SSL handshake protocol, which secures the channel for communication.
The client starts by sending a request for authentication by providing a list of AHP protocol
version numbers it supports in a string (listed in order of preferred version numbers). The line
must contain a comma separated displayable characters, with two zeros as terminating character.
The purpose of exchanging version numbers between the client and the server is that in case

21
either of the party does not support the latest version of the protocol, they can negotiate on which
version to use for a successful handshake.
5.3.2. AUTHACK
The server checks to make sure the version numbers are acceptable and respond to the client with
a version number string of its own (similar string format as client’s string). The client adjusts the
protocol to the server required version number. Note that, for security reasons, only the server can
decide on what AHP protocol version number to use. If the server does not support or agree on
the client’s desired version number, the server terminates the connection.
5.3.3. AUTHACCOUNT
The client provides user account id along with its CA certified digital certificate and public key.
Once the server receives the necessary information, it checks the client’s certificate with
certificate authorities for authenticity and extracts domain information. Now, the server must
check to ensure that the user account id exists and that the client has the prior authorization to
access the account. The server terminates the connection if any of these steps fail to complete
successfully. Note that although SSL provides an optional client verification, we perform the
client verification as a mandatory step here. This extra step ensures that even if the user account’s
private key has been compromised, the key would not be accepted from an unauthorized client.
5.3.4. AUTHCHALLENGE
The server creates a challenge string made up of an arbitrary length of random numbers, encrypts
it with the user id’s public key and sends the challenge string to the client. The random number
can prevent a forward attack, as the challenge string cannot be reused for future authentication.
5.3.5. AUTHRESPONSE
The client must first decrypt the user account’s private key utilizing a pass-phrase, then decrypt
the challenge string and send it to the server.
5.3.6. AUTHCOMPLETE
This AuthComplete is the final step in the AHP handshake protocol. The server checks the
decrypted string for a match. When there is a match, the server returns AHP_SUCCESS code.
Otherwise, returns AHP_FAILED code to the client and terminates the connection. Once the
authentication is successful, the HTTP request/response commands can be sent between the client
and the server.
6. TRUST MODEL
To identify a server or a client machine that we want to communicate with, a trusted source is
needed to verify the identity of either of the party. We now discuss that next.
6.1. CERTIFICATE AUTHORITY
Certificate Authority (CA) is a trusted entity (e.g., VeriSign, GeoTrust, Comodo, DigiCert) that
issues digital certificates for authentication of computer systems on the Internet. CA validates the
originator of the request for a digital certificate before issuing the certificate. The concept of
using a CA is similar to trusting government institutions that issue driver’s licenses that are often
used in verifying the identity of individuals.

22
6.2. CERTIFICATE
Certificates are based on X.509 standard [4] and are digital documents which are generated and
issued by a CA. Certificates are made utilizing the public-key cryptography (PKI) which enables
parties communicating over the Internet/network to validate the identity for establishing a secure
connection [5]. Digital certificates can be purchased from CAs for an annual fee or through other
purchase plans offered by a particular CA. Certificates can also be locally generated (i.e., self-
signed certificate) which are typically used for development and testing purposes. We require that
third-party companies purchase digital certificates from their desired CA and deploy them on
their computers for using the AHP handshake protocol.
6.3. CERTIFICATE REVOCATION LISTS
To identify the validity and status of a digital certificate (e.g., revoked or expired), CA keeps a
record of those certificates in a list called the Certificate Revocation Lists (CRL) [6]. The AHP
protocol checks the CRL list to ensure the validity of the digital certificate. This is a critical step
in the AHP protocol authentication process to ensure that the client or server meets the identity
requirements of the CA.
7. ACCESS CONTROL
The term access control defines the system protection mechanism for granting or denying access
to the available resources. The access control ensures that persons or services that request access
to a resource have prior authorization for using the resource. The resource can have (but not
limited to) the protection attributes such as read, write or modify, and delete. The design of
protection mechanism needs to accommodate each type of system that requires protection, and it
can vary widely from system to system. [7]
7.1. PRINCIPLES OF LEAST PRIVILEGE
The best approach to giving authorization to a resource is to use the concept of giving the least
privilege, i.e., giving what is needed to use a resource and restricting everything else [8]. Utilizing
this principle can limit what action can take place on a resource, which can minimize data leaks
or misuse.
7.2. ACCESS MODELS
Access control security can be designed for infrastructure protection via one or more of the
following security models [9] (listed in alphabetical order):
• Access Matrix Model
• Bell-LaPadula Confidentiality Model
• Clark-Wilson Integrity Model
• Discretionary Access Control (DAC)
• Mandatory Access Control (MAC)
• Role-Based Access Control (RBAC)
These security models provide an array of protection and access control for a variety of real-
world applications, such as operating systems, databases, and web systems. This paper is
interested in the Role-Based Access Control (RBAC) model since it provides the necessary

23
granular access for securing online accounts. The RBAC has been used for protecting a variety of
domains for government and commercial infrastructure [10]. We utilize the RBAC model to
define new roles and types of access for particular web objects to provide added security for
online accounts.
7.3. CURRENT ACCESS STRUCTURE
With the current account access paradigm, when a third-party company logs into users’ online
account at their financial institutions, they get the same privileges as the account’s owner, i.e., full
privilege access to users’ accounts. The third-party having the same access level as the owner of
the account is the by-product of using the same authentication mechanism for logging into a user
account, which makes it difficult to distinguish access made by a third-party company versus the
account’s owner. As a result, financial institutions may not be able to offer any account access
control for their users, unless they can differentiate between accesses made by each of the parties.
We believe that no one other than the designated account’s owner should have full privileges to
users’ accounts, even after successful login to the account. Therefore, the third-party access must
be limited and sandboxed to allow the display of account information or authenticate the account
access, without any other privileges afforded to the account owner.
7.4. GRANULAR ACCESS CONTROL VIA RBAC MODEL
The new online account security model we are envisioning here would make the granular access
control for online accounts feasible. Hence, due to using a separate protocol, it would be possible
to distinguish third-party accesses from the account’s owner access. Utilizing a granular access
control with the role-based scheme of the RBAC model enables fine-grained access to form
sandbox around third-party companies’ login. When a third-party uses the new protocol to access
the users’ accounts, the source login by definition becomes distinguishable (e.g., based on which
protocol used), and account sandbox becomes feasible. That is, financial institutions can detect
the alternative form of account access, when it is initiated using the new protocol versus current
protocol, and then allow the access according to the initiator’s role. We define the architecture of
the access control structure with the user role and access pair as access sequence Role (Object,
Attribute), and discuss that next.
7.4.1. ROLES
We define the following three roles to address the security of the accounts and enable each role to
perform their authorized access:
• ROLE_ADMIN - This role performs account administration tasks. It offers full privileges
that can allow an account manager at a financial institution to make changes to users’
accounts.
• ROLE_OWNER - This role gives privileges to the owner of the account, which includes
reading the contents of the account and performing transactions on the account.
• ROLE_THIRDPARTY - The third-party companies that are authorized by users to read
the contents of their accounts use this role. No transactions can be performed on the
account via this role.

24
7.4.2. OBJECT
The Object is the entity that needs to have granular access protection, which for instance can
apply to the whole page, individual accounts, or any components within a page. For example,
objects can be a Checking Account, a Savings Account, or a Certificate of Deposit.
7.4.3. ATTRIBUTE
The Attribute is a word length, which consists of fine-grained privileges allowed for a particular
object. We define four Attribute flags in a hexadecimal nibble format and present it as binary
numbers as shown in Table 1:
Table 1. List of Attribute flags and their values.
The binary numbers can be used with the logical OR operator to build a hexadecimal nibble
representing an access configuration for a particular role. There is a dedicated hexadecimal nibble
for each role to specify the privileges for that role. Note that, for the majority of objects, the first
three privileges should cover most of the permission cases. However, a “custom” attribute has
been added in case there are particular circumstances where an extra permission is needed.
7.4.4. ROLE MASK
The least significant hexadecimal nibble of an Attribute word is assigned to ROLE_ADMIN, then
moving toward to the most significant bit. The next nibble is assigned to ROLE_OWNER, and
the next is assigned to ROLE_THIRDPARTY. We define role mask for the Attribute word in
hexadecimal number as shown in Table 2:
Table 2. List of Role masks and their values.
When new roles are needed, it can be directly added to the Attribute word after the last role
moving toward the most significant digit. For example, access pair (Checking Account, 0x8EC)
has the following meaning:
• The third-party can read, but cannot perform transactions or modify the account.
• The owner of the account can read, modify, and transact on the account.
• An administrator (e.g., manager) can read and modify, but cannot perform transactions on
the account.

25
8. SHORTCOMINGS
In this section, we discuss security and performance shortcomings of a novel protocol and new
techniques that we have introduced in this paper.
8.1. PERFORMANCE SHORTCOMINGS
The new HTTPAS protocol was designed to be more secure when used for computer-to-computer
communications than what is being employed in current practices. However, this new security
enhancement comes at the cost of performance. The loss of performance is due to the primary
security steps of verifying client’s certificate and public key infrastructure using asymmetric
cryptography. The asymmetric encryption and decryption utilize larger bits to avoid brute-force
or other forms of attacks. As a result, the runtime may be slower than a simpler method that
utilizes lower security for its cryptography.
8.2. SECURITY SHORTCOMINGS
We now discuss security considerations and vulnerability that can affect the protection and
integrity of secure communications over the Internet and networks.
8.2.1. CYBER-ATTACKS
In today’s modern connected world, with many types of devices connecting us all together,
security has never been more important. During our research and writing of this paper, cyber-
attacks often made news in the media and on the web. For instance, there were two major cyber-
attacks involving two big companies:
• It was announced that there was cyber-attack on Yahoo email in which data from one
billion accounts were stolen [11] and Yahoo data being sold on the “dark web” [12].
• There was a cyber-attack on Dyn, a major provider of domain name service. The
attackers used Distributed-Denial-Of-Service (DDOS) causing interruption of services to
the popular websites [13].
The attackers often use any vulnerabilities they can exploit to achieve their objectives. In the case
of Dyn, the attackers were exploiting the IoT (Internet of Things) vulnerabilities. The IoT devices
such as webcams and digital video recorders (DVRs) are by nature less secure than mainstream
devices. In the new era of computing, more and more IoT devices are becoming accessible online
via the Internet. Therefore, creating an opportunity for attackers to utilize them to create and
operate bots (i.e., applications that perform automated instructions), to overwhelm specific system
or network of their choosing. [14] The concept of bots is a known technique, which was used in
the past on systems that were compromised by malware to take down victim’s website using
heavy traffic.
The number and the types of devices (Figure 6) being accessible on the Internet is on the rise
[15]. Therefore, creating even a bigger number of systems that attackers can exploit and take
advantage of if those devices have security flaws or weaknesses. Manufacturers need to create
more secure IoT devices with automatic updates built-in, which can update the device’s firmware
when security vulnerabilities are found. The login security for IoT devices should have double
layer security to create another barrier for the attackers to overcome. If attackers manage to

26
compromise the first layer of security, they would still have one more security layer to overcome
before gaining access to the device.
Figure 6. Number of devices on the Internet are on the rise
8.2.2. SSL PROTOCOL VULNERABILITY
Although SSL design and architecture has built-in mechanisms for preventing attacks (e.g.,
Eavesdropping and Man-In-The-Middle attack prevention features), it is not immune to attackers
[16]. The vulnerability may come from flaws in SSL protocol, SSL libraries, hacked digital
certificates, and cipher negotiations, to name a few. These flaws are often discussed at security
conferences such as Black Hat. Our protocol may be vulnerable to attackers if the infrastructures
that we utilize as a foundation for our protocol becomes vulnerable.
8.2.3. CA ENTITIES VULNERABILITY
The CAs are the basis for the trust models of verifying digital certifications on the Internet today.
If a vulnerability exists in a CA infrastructure and attackers can exploit it to their advantage, it
breaks the trust model that we rely on for identification. The CA security breach may have a
profound effect on the reputation of the CA, which may result in the ceasing of the operation of
the CA. Nevertheless, if the CA or certificates are hacked, it makes our protocol vulnerable to an
attacker. An example of attack is DigiNotar, which was hacked by an attacker in 2011. The attack
on DigiNotar had a catastrophic effect, and as a result, they were not able to recover from the
attack, and filed for bankruptcy [17], [18].

27
8.2.4. CRYPTOGRAPHY VULNERABILITY
Mathematicians have proven that encryption algorithms are mathematically sound; however, as
computer systems are getting more powerful over time, the number of bits used in calculations of
the encryption mechanism must also increase. For example, RFC7935 states that the RSA key
pairs for use in public key infrastructure (which is a framework for a one-way function) must be
using at least 2048-bit [19]. Therefore, the strength of encryption algorithms for a one-way
function relies on the computing power and time required to decrypt the message.
8.3. INITIAL BURDEN FOR ALL PARTIES INVOLVED
All the stakeholders (e.g., financial institutions, third-party companies, end-users) would need to
make changes to their current processes, practices, and habits. For instance, financial institutions
would need to modify their online accounts and systems to support the new protocol and account
access. Third-party companies must make changes to their current informational retrieval
processes, as well as follow the specification of the new protocol for user authentication. Account
owners would need to request the new access credentials from their financial institutions, and
provide the third-party vendor information they want to use for their account. Also, users need to
change their full access login credentials if they have already given that to any third-party
companies.
9. RELATED WORK
In this section, we discuss related work in the area of authenticating users’ access to online
services.
9.1. OAUTH
A related work to our research is the OAuth authorization framework. OAuth allows
authentication of a user without exposing their account credentials to a third-party provider over
HTTP protocol [20]. The concept behind OAuth is that, when a user is trying to login to a third-
party website, they can use their accounts’ username/password from one of the major companies
(e.g., Facebook, Twitter, LinkedIn) to authenticate themselves with a third-party company. With
this method, users no longer have to reveal their login credentials to the third-party companies.
Currently, the deployments of OAuth framework have had limited exposure. This model has not
been widely accepted as the alternative to hiding and protecting account credentials from third-
party companies. As a result, OAuth currently suffers from penetration and adoption challenges,
as well as privacy and security concerns.
9.2. APPLICATION PROGRAMMING INTERFACE
Authentication via Application Programming Interface (API) is an example of related work, at
which companies provide mechanisms for information retrieval and manipulation from their
systems. This type of access is performed via application permission model [21] given by their
API (e.g., Twitter API) [22]. This method is used to read, write, perform information retrieval and
data mining to access and harvest data from companies (e.g., Twitter, Google) which support the
APIs. The API may use OAuth technology as its underlying authorization mechanism to
authenticate the request. Due to the nature and exposure of information provided with this model,
it has its limit where sensitive information, security, and privacy are concerned.

28
10. CONCLUSIONS
The ubiquity of the Internet has increased the potential exploitation of security weaknesses and
vulnerabilities of our financial institutions. Users are sharing their full access accounts’
credentials with third-party companies and need to be wary of sharing this sensitive information
with others. Consequently, others can use those credentials to execute transactions on their
account. Meanwhile, users’ need of financial aggregation services provided by the third-party
companies are growing. The increase in using these services, coupled with the lack of an alternate
mechanism for account authentication with limited access, can make users vulnerable to
attackers.
In this research paper, we have introduced and prescribed a novel and holistic model with a new
protocol for online account architecture to be used by third-party companies. This model works
on the notion of two security components: 1) Authentication mechanism utilizing new handshake
protocol, which enables verification of users’ credentials that is more secure than a
username/password combination, 2) User access sandboxing technique via role-based granular
access control that protects the account against unwanted transactions. Utilizing the new
architecture, design, and novel techniques we have presented in this paper, users no longer need
to give out their full access account credentials to third-party companies. Instead, users can
provide a limited and alternate access account credentials for third-party use. Consequently, when
attackers compromise the third-party’s computer and steal users’ access information, they cannot
perform transactions on the account. In the case of a security breach, users can revoke the third-
party login credentials with no impact on the existing full access account credentials.
Furthermore, the novel and holistic new techniques we have prescribed are universal and can be
adapted for other domains (e.g., medical records, airline ticket system, online stores, and emails)
with little or no modifications to the architecture we have presented in this paper.
REFERENCES
[1] I. Jinwoo Hwang, “The Secure Sockets Layer and Transport Layer Security,” Jun. 2012. [Online].
Available: http://www.ibm.com/developerworks/library/ws-ssl-security/index.html
[2] “Service Name and Transport Protocol Port Number Registry,” 00017. [Online]. Available:
http://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml
[3] E. Rescorla, “HTTP Over TLS,” Internet Requests for Comments, RFC Editor, RFC 2818, May
2000. [Online]. Available: http://www.rfc-editor.org/rfc/rfc2818.txt
[4] “ITU-T The Directory: Public-key and attribute certificate frameworks.” [Online]. Available:
http://www.itu.int/itu-t/recommendations/rec.aspx?rec=13031
[5] S. Chokhani, W. Ford, R. Sabett, C. Merrill, and S. Wu, “Internet X.509 Public Key Infrastructure
Certificate Policy and Certification Practices Framework,” Internet Requests for Comments, RFC
Editor, RFC 3647, November 2003.
[6] D. Cooper, S. Santesson, S. Farrell, S. Boeyen, R. Housley, and W. Polk, “Internet X.509 Public
Key Infrastructure Certificate and Certificate Revocation List (CRL) profile,” Internet Requests
for Comments, RFC Editor, RFC 5280, May 2008, http://www.rfc-editor.org/rfc/rfc5280.txt.
[Online]. Available: http://www.rfc-editor.org/rfc/rfc5280.txt
[7] A. Silberschatz, P. B. Galvin, and G. Gagne, Operating system concepts, 9th. Addison-Wesley
Reading, 2013.
[8] G. S. Graham and P. J. Denning, “Protection: Principles and practice,” in Proceedings of the May
16-18, 1972, Spring Joint Computer Conference, ser. AFIPS ‘72 (Spring). New York, NY, USA:
ACM, 1972, pp. 417–429. [Online]. Available: http://doi.acm.org/10.1145/1478873.1478928

29
[9] M. G. Solomon and M. Chapple, Information security illuminated. Jones & Bartlett Publishers,
2009.
[10] D. F. Ferraiolo, R. Sandhu, S. Gavrila, D. R. Kuhn, and R. Chandramouli, “Proposed NIST
Standard for Role-based Access Control,” ACM Trans. Inf. Syst. Secur., vol. 4, no. 3, pp. 224–274,
Aug. 2001. [Online]. Available: http://doi.acm.org/10.1145/501978.501980
[11] S. Fiegerman, “Yahoo says data stolen from 1 billion accounts,” Dec. 2016. [Online]. Available:
http://money.cnn.com/2016/12/14/technology/yahoo-breach-billion-users/index.html
[12] S. Larson, “Hackers are selling Yahoo data on the dark web,” Dec. 2016. [Online]. Available:
http://money.cnn.com/2016/12/16/technology/yahoo-for-sale-data-dark-web/index.html
[13] “Hacked home devices caused massive Internet outage.” [Online]. Available:
http://www.usatoday.com/story/tech/2016/10/21/cyber-attack-takes-down-east-coast-netflix-
spotify-twitter/92507806/
[14] M. Pittenger, “Dyn DDoS Attack: IoT Vulnerabilities,” Oct. 2016. [Online]. Available: http:
//blog.blackducksoftware.com/ddos-attack-dyn-iot-vulnerabilities
[15] J. Greenough “The Internet of Everything,” 2015. [Online]. Available:
http://www.businessinsider.com/internet-of-everything-2015-bi-2014-12
[16] “Logjam: the latest TLS vulnerability explained,” May 2015. [Online]. Available:
http://blog.cloudflare.com/logjam-the-latest-tls-vulnerability-explained/
[17] J. Prins and B. U. Cybercrime, “DigiNotar certificate authority breach Operation Black Tulip,”
2011.
[18] K. Zetter, “DigiNotar files for bankruptcy in wake of devastating hack,” Wired magazine,
September 2011.
[19] G. Huston and G. Michaelson, “The profile for algorithms and key sizes for use in the resource
public key infrastructure,” Internet Requests for Comments, RFC Editor, RFC 7935, August 2016.
[20] “OAuth Community Site.” [Online]. Available: https://oauth.net/
[21] “Application Permission Model - Twitter Developers.” [Online]. Available:
https://dev.twitter.com/oauth/overview/application-permission-model
[22] “Twitter Developer Documentation - Twitter Developers.” [Online]. Available:
https://dev.twitter.com/docs
AUTHORS
Mehrdad M. Nourai received a B.S. degree in Electrical Engineering from
Northeastern University, Boston Massachusetts in 1982, and an M.S. degree in
Computer Science from Boston University, Boston Massachusetts in 2000. He is
currently a Ph.D. degree candidate in Computer Science at the University of
Massachusetts Lowell, Lowell Massachusetts. He has over three decades of
professional experience in computer industry and academics. His industry
experience consists of architect, design, and development of software for all kinds of
computer systems including embedded systems and systems with standard,
proprietary, and real-time operating systems. He has been teaching computer science
courses as an adjunct faculty for the MET Computer Science Department at Boston University since 2000.
Also, he has been teaching courses as an adjunct faculty for the Computer Science Department at Salem
State University since 2008. His research and areas of interests include Computer Networks and Security,
Data Communications, Human-Computer-Interaction, Database, and Mobile Apps Development.

30
Haim Levkowitz is the Chair of the Computer Science Department at the
University of Massachusetts Lowell, in Lowell, MA, USA, where he has been a
Faculty member since 1989. He was a twice recipient of a US Fulbright Scholar
Award to Brazil (August – December 2012 and August 2004 – January 2005).
He was a Visiting Professor at ICMC — Instituto de Ciencias Matematicas e de
Computacao (The Institute of Mathematics and Computer Sciences)—at the
University of Sao Paul, Sao Carlos – SP, Brazil (August 2004 - August 2005;
August 2012 to August 2013). He co-founded and was Co-Director of the
Institute for Visualization and Perception Research (through 2012), and is now
Director of the Human-Information Interaction Research Group. He is a world-
renowned authority on visualization, perception, color, and their application in data mining and information
retrieval. He is the author of “Color Theory and Modeling for Computer Graphics, Visualization, and
Multimedia Applications” (Springer 1997) and co-editor of “Perceptual Issues in Visualization” (Springer
1995), as well as many papers on these subjects. He is also co-author/co-editor of "Writing Scientific
Papers in English Successfully: Your Complete Roadmap," (E. Schuster, H. Levkowitz, and O.N. Oliveira
Jr., eds., Paperback: ISBN: 978-8588533974; Kindle: ISBN: 8588533979, available now on Amazon.com:
http://www.amazon.com/Writing- Scientific-Papers-English- Successfully/dp/8588533979). He has more
than 44 years of experience teaching and lecturing and has taught many tutorials and short courses, in
addition to regular academic courses. In addition to his academic career, Professor Levkowitz has had an
active entrepreneurial career as Founder or Co-Founder, Chief Technology Officer, Scientific and Strategic
Advisor, Director, and venture investor at a number of high-tech startups.

ENHANCING CYBER SECURITY OF ONLINE ACCOUNTS VIA A NOVEL PROTOCOL AND NEW TECHNIQUES

More Related Content

What's hot (18)

Similar to ENHANCING CYBER SECURITY OF ONLINE ACCOUNTS VIA A NOVEL PROTOCOL AND NEW TECHNIQUES (20)

Recently uploaded (20)

ENHANCING CYBER SECURITY OF ONLINE ACCOUNTS VIA A NOVEL PROTOCOL AND NEW TECHNIQUES