Slide Presentation on coating not cracking
Download as PPTX, PDF0 likes160 views
This document discusses how to prevent cracking when applying dispersion coatings. It notes that cracking can occur if the temperature is too high or the coating speed or quantity is too low. It provides tips for operators to ensure a uniform coating, such as using a viscometer to check flow time, following manufacturer guidelines carefully, optimizing the gap between rollers, allowing proper drying time using the right infrared radiation and hot air combination, and checking the pile temperature difference between the feed and delivery. The document encourages contacting the provided representative or visiting the company website for more information.
Slide Presentation on coating not cracking
- 2. Cracking “Cracking” with a web-like pattern of fine cracks mostly occurs if the temperature is too high and the speed or quantity of coating is too low.
- 3. Continue… Several precautions need to be taken to ensure a dispersion coating does not end up looking like cracked, leathery skin.
- 4. Dispersion coatings Dispersion coatings are mostly made up of water. After water come styrene acrylates which are responsible for producing the intended effect. Then other components that ensure dispersion is stable and define properties such as surface tension and rub resistance.
- 5. Film Once the water has dried off, the remaining components meld together to form a film. This film is practically resistant to yellowing, ideal for coating everything from luxury print products to packaging for frozen foods and ensures rub resistance.
- 6. Operators Press operators can also cut powder consumption. Operators who want to make the most of these benefits must keep a close eye on how much coating is applied.
- 7. Continue… To do this, they can use a DIN viscometer (ISO 2431) to check the coating's flow time. To ensure accurate results, it is crucial that the coating manufacturer's guidelines (warehousing, usage, processing temperature, emulsification, etc.) are followed to the letter.
- 8. Continue… Operators using the chambered blade system are at an advantage, as a laser-engraved screen roller ensures that a largely consistent quantity of coating is applied.
- 9. Continue… To achieve application levels that are as uniform as possible, it is advisable when using the two-roller system to optimally adjust the gap between the water pan and metering rollers along their entire length.
- 10. Continue… To ensure the perfect coating result, it is also important that dispersion coatings are allowed to dry properly. Because they dry through evaporation only, exactly the right combination of infrared radiation and hot air needs to be used.
- 11. Continue… As a rule of thumb, the pile temperature at the delivery should be 8-10 degrees Celsius higher than at the feeder when processing paper and 10-15 degrees warmer when working with card.
- 12. Continue… One of the best ways of checking this is with a portable moisture meter that has a temperature readout.
- 13. Contact Us Mr. Rajendra Prasad Rajendra.prasad@heidelberg.com www.heidelberg.com Copyright 2014 Heidelberg India, all Right Reserved. Heidelberg India keeps member Printing industry informed about its latest development and attractive offers.
- 14. THANK YOU…