Q.station concentrateur datalogger GANTNER INSTRUMENTS FRANCE

Q.station 101 Test Controller
Gantner Instruments Test & Measurement GmbH · www.gantner-instruments.com · office@gantner-instruments.com
Silvrettastraße 11-13 · A-6780 Schruns/Austria · Tel. +43 (0) 5556 77463-0 · Fax +43 (0) 5556 77463-300
Heidelberger Landstr. 74 · D-64297 Darmstadt/Germany · Tel. +49 (0) 6151 95136-0 · Fax +49 (0) 6151 95136-26
16 channels at 100 kHz
128 channels at 10 kHz
The Q.series has been designed for demanding measurements
found in today’s most industrial measuring and testing
environments. The range of applications starts from single
standalone solutions up to networked multi-channel applications
in the field of component testing, engine testing, process
performance testing and structural monitoring.
The range and flexibility of the modules allows an optimized
solution for each single task: Dynamic signal acquisition up to
100 kHz, in/outputs for all types of signals, galvanic isolation of
in/outputs, multi-channel solutions, high density packaging and
intelligent signal conditioning.
Data exchange between Test Controller and automation level is
communicated via Ethernet TCP/IP, CAN or fieldbus system
EtherCAT as well as master or slave. Further Ethernet based
industrial standards are in preparation.
Most important features:
Very high data rates up to 100 kHz each channel
100 kHz at 16 channels, 10 kHz at 128 channels
64 Q.bloxx modules connectable
Ethernet interface for configuration and data output
1 Gig-E, TCP/IP, UDP, up to 16 MB/s
Modbus TCP/IP, ASCII, High Speed Port
Web server, web client and e-mail
Fieldbus interface
EtherCAT-Slave, 1024 variables read and write at 10 kHz
1 x CAN, 2 x USB 2.0, 4 MB/s
Synchronization and time stamp of measurement values
IRIG 2 based master slave principle on RS485 standard
system synchronization ±1 µs applicable
Data buffer memory dyn. 500 MByte, stat. 4 GByte
expandable over USB (up to 1000000 measurements/s) and SD card
8 digital I/O
direct connection of encoder for fast angle measurement
frequency , PWM and counter measurements, state signals
Display (D versions)
3.5” full VGA 480 x 640 pixel
PAC functionality with extensive library (T versions)
fast PID controllers, process control, data logging, transfer functions,
mathematics, Boolean combinations, function generators
Versions
display, 3,5“ VGA, PAC graphical programming
480x640, touch screen test.con, incl. HMI designer
Q.station
Q.station T x
Q.station D x
Q.station DT x x

Micro Controller
Typ Atom Z530; 1,6 GHz
RAM 1 GByte, 500 MByte verfügbar für Datenspeicher
Flash 4 GByte
Real Time Clock (RTC) Battery buffered
Watchdog programmable
OS Real Time Linux
Ethernet Interface
Number of channels 2048 Byte Data (512 Variablen Lesen und 512 Variablen Schreiben)
Baud Rate 1 Gigabit/s (1-Gig-E)
Data rate Online and block transfer up to 16 MByte/s (32 Variablen at 100 kHz)
Protocolls TCP/IP, UDP, Modbus/TP/IP, ASCII, High Speed Port
Webserver and WebClient
Isolation voltage 500 V
EtherCAT Interface - Slave
Standard Ethernet
Number of channels 4096 Byte Data (1024 variables read and 1024 variables write)
Baud Rate 100 Mbps
Cycle time ≥100 µs
CAN Interface
Number 1
Kind pure CAN
Configuration per DBC files
Optional CANOpen
RS 485 Slave Interfaces
Number 4
Baud rate 9,6 kbps up to 48 Mbps (500.000 Messungen/s)
Connectable devices max. 16 modules at one UART

USB Interface
Number 2
Version USB 2.0
Data rate Up to 4 MByte/s (up to 1.000.000 measurements/s)
SD-Card Slot
Use Interface for data logging, Interface for firmware update
Logging without Limits
500 MByte RAM
4 GByte Flash
2 x USB; 4 MByte/s
SD Card
Digital Inputs
Number 8
Function configurable counter, frequency, PWM and state signals
digital encoders focusing with angle synchronous measurement
Input voltage / Input current max. 30 VDC / max. 1.5 mA
Upper switching threshold >3,5 V (high)
Lower switching threshold <1,0 V (low)
Digital Outputs
Number 4
Function configurable
watchdog and dead man function
Type of output Open Drain p-channel MOSFET
Output voltage / Output current max. 30 VDC / max. 100 mA
Synchronization of a Multi Test Controller System
Interface RS485 Standard
Mode Master Slave Prinzip, IRIG 2 Standard
Synch. master and slave
Accuracy System synchronization ±1 µs
Power Supply
Power supply 10 to 30 VDC, over voltage and overload protection
Power consumption approx. 12 W

Functional Diagram
Display (optional)
Display 3.5“ full VGA, 480 x 640 dots
Screen Capacitive touch screen behind real glass
Configurable Programmable display content by using test.con Studio
VNC support
external display
connection optionally
Full VGA (D version)
capacitive touch screen
programmable display content (DT version)
Environmental
Operating temperature -20°C to +60°C
Storage temperature -40°C to +85°C
Relative humidity 5 % to 95 % at 50°C, non condensing
Mechanical
Case Aluminium
Dimensions (W x H x D) (175 x 110 x 55) mm
Weight 900 g
Mounting DIN EN rail

Logging function
With Test Controller Q.station a very flexible and powerful data logging is possible.
Four data buffers (RAM) with different configurable data rates can be assigned to the measurement and I/O signals.
According to the configuration of up to 4 loggers occurs the logging of the buffer data at a selectable medium (intern. Flash, USB,
SD-Card) with selectable logging rates, storage duration, start and stop trigger (auto start, condition, touch) with or without pre-
and post-trigger.

Exemplary logger configuration with the software test.commander
Connections:
Top view:
Bottom view:

Graphical programming of real-time functions (T version) and additionally an individual display and touch
function (DT version) with test.con Studio
With test.con Studio it is possible to program graphically application-specific functions (control flow calculations, calculations,
controller, combinations etc), and to design an individual display and control panel (touch screen of the controllers or PC) and load
this package into the Controller Q.station T or Q.station DT.
Create functionality using a library of function blocks:
Designing the display of the Q.station or the PC screen, followed by combining the signals with visualization and operating
elements:

Downloading the application into the test controller Q.station and/or into the PC to run on the run time version of test.con Studio.
Operation and visualization over Q.station, PC or mobile device via VNC:
Due to the separation of real time and user tasks of the controller (real time kernel, user kernel) it is warranted that pretentious
high speed tasks like dynamic logging or fast PID will run stable and independent from the very flexible and individual tasks like
visualization and operation.
No influencing of the real time kernel by the user kernel – a firewall in the device.
Valid from Sept. 2012. Specification subject to change without notice
DB_Q.station_E_10.docx

Q.station concentrateur datalogger GANTNER INSTRUMENTS FRANCE

More Related Content

What's hot (20)

Viewers also liked (9)

Similar to Q.station concentrateur datalogger GANTNER INSTRUMENTS FRANCE (20)

More from EUROPAGES (20)

Recently uploaded (20)

Q.station concentrateur datalogger GANTNER INSTRUMENTS FRANCE