GR820
Download as DOC, PDF0 likes451 views
The GR-820 is an advanced airborne gamma-ray spectrometer system that combines detector gain control and spectrometer functions into a single compact unit. It utilizes state-of-the-art signal processing to provide accurate analysis with ease of use. The system features automatic gain control for each detector crystal, high-resolution spectral analysis, and flexible output capabilities. It provides a fully integrated solution optimized for multi-detector airborne gamma-ray spectroscopy applications.
![D. MISCELLANEOUS
Regions Of Interest (R.O.I.):
- 8, selectable by keyboard with upper and
lower limits individually set over the entire
spectrum.
- First 4 R.O.I, available for digital and
analog output
- Second 4 R.O.I, available only for digital
output
System Resolution:
Detector Resolution is automatically
computed for each crystal (and summed
crystals) during peak analysis and
displayed for operator monitoring when
required. A user adjustable maximum level
automatically alarms if exceeded.
System Test:
At POWER ON a full system test of all
peripherals is performed including; Lithium
back-up battery: system RAM memory:
display handshaking: system configuration
(options installed): detectors selected
checked via ADC analysis: peripheral
handshaking response... etc.
Configuration Menu:
Allows selection of number of detectors in
use, confidence levels for gain analysis,
selectable output configuration for analog
and digital data and various special
display/monitoring functions.
Maintenance:
Full set of special menus allow user to test
and calibrate many system functions.
Remote Maintenance:
Optional unit permits connection of the
GR-820 directly from its remote location to
EXPLORANIUM's Service Department
computer via telephone link to allow
factory engineers to analyse system
problems and advise on correct solutions
[Future].
Mechanical:
19" wide x 5.25" high x 15" deep
weight - 18 lbs.
Power:
28V - 1 AMPS.
E. DETECTORS
• Specially designed hi-impact polystyrene
cases using low background material
formulated for minimum signal attenuation.
• Full thermal and internal shock protection
allows units to be directly mounted to
vehicle floor.
GPX-1024
• Crystals - 4 each 4" x 4" x 16"
• Total Volume - 1024 cu. ins - 16.7 L.
• Dimensions - 27.85" x 19.5" x 7.2 ins. -
70.7 x 49.5 x 18.3 cms
• Pack - weight - 175 Ibs. - 80 Kgs * Ship -
weight - 230 Ibs. - 105 Kgs
• Power - 28V 0.5A-3 pin connector
• Signal - 4 individual BNC outputs
• Very low noise High Voltage power
supply in EACH pack
• Preamplifier with special signal
processing for signal optimisation.
• Power to detectors ONLY 28V - All other
voltages are generated internally.](https://image.slidesharecdn.com/gr820-160824112111/85/GR820-4-320.jpg)
GR820
- 1. GR-820 Multichannel Gamma-Ray Spectrometer The GR-820 is the most advanced airborne spectrometer system available and employs state-of-the-art signal processing methods for accurate data analysis combined with ease of operation. Most previous systems separated the detector gain control function from the spectrometer function, but the GR- 820 uses advanced instrumentation to combine these essential functions into a single compact unit. The GR-820 utilises advanced signal processing/analysis methods previously available only in dedicated laboratory instruments, to solve many of the limitations inherent in previous airborne systems. The combination of automatic gain control, multichannel analysis, front panel visual display and multi-output capability, provide a fully integrated system specifically optimised for use with multi-detector systems. Features: Combined Spectrometer and Detector Controller based on multi microprocessor technology. Dual 256 channel analysers for UP and DOWN detectors. Optional 512 channel. Detector input capability - 16 crystals configured as UP or DOWN. Individual crystal Automatic gain control using any spectrum peak with simultaneous signal input analysis. Precise correction for system dead-time and pulse pile-up for all crystals. Front panel electroluminescent graphics display for easy data and spectrum monitoring. Multiple outputs allow flexible interfacing to external computers and data acquisition systems. Remote mode gives full control of ALL operating functions from an external computer. System may be linked via telephone to factory Service department computer to aid in troubleshooting. Gain Control: Gain control of multiple detectors in previous systems was accomplished by the use of Temperature or Artificial Isotope stabilisation methods. temperature based stabilisation systems create complex logistic problems due to the need to keep heating systems operative for 24 hours/day. Another major problem is that the Gain requires very precise operator adjustment to achieve correct detector balancing. Thus faulty operator settings cause major data errors and, during operation, any incorrect adjustments are magnified by small PMT drifts. Automatic gain control using artificial isotopes has long been out of favour due to greatly increased pulse pile-up and problems in automatic feed-back control causing signal distortion in highly radioactive areas.
- 2. The GR-820 uses a fully digital gain control method utilising Gaussian curve fitting of selected peaks. For most users, the peak of choice would be natural potassium which occurs in most geological environments with sufficient activity for analysis and control. One great advantage of Potassium is that since it occurs much higher in the spectrum than the commonly used Cesium peak, gain errors are minimised at the spectrum extremes. Some other systems have tried using sequential analysis of crystals for such types of gain control, but the GR- 820 uses simultaneous accumulation of spectra for each crystal, allowing frequent gain correction for maximum spectrum quality. The use of Gaussian curve fitting gives the most precise determination of the peak centroid, thus greatly increasing the accuracy of the gain control. This system enables the user to achieve fully automatic gain control using internal computer analysis, with reporting of system status and performance via the front panel display. Specifications: A. DETECTOR CONTROLLER • Maximum number of crystals 16. • Software selectable between UP and DOWN channels. • Each crystal has individual pole-zero cancellation, Semi-Gaussian shaping and an advanced base line restorer. • Continuous, individual-crystal, spectrum analysis ensures optimum system stabilisation and Resolution, achieved by the use of a sophisticated Gaussian curve fitting algorithm for centroid analysis of the selected stabilisation peak. • High energy cosmic pulse rejection. Accurate pile-up rejection for simultaneous pulses allows qualitative gamma-ray spectrum analysis almost independent of system count rate. Special circuitry analyses for pulse pile-up and permits only detector signals from single events to be analysed. Simultaneous events in adjacent crystals are summed to reduce the Compton effect. • Residual pulse pile-up at 100000 counts/sec. - less than 2%.
- 3. B. ANALOG TO DIGITAL CONVERTER (ADC) Type: Wilkinson ramp - 50 MHz Linearity: Integral: less than 0.2% Differential: less than 1 % Average System Dead Time: Less than 5 microseconds/pulse. Live Time Channel: Actual system live time output with digital data allowing post correction of system dead- time to an accuracy OF 0.1% Number Of Channels: - 256 for DOWN detector - 256 for UP detector - 512 channel optional Maximum Number of Counts/Channel: 65535 16 bit Lower Threshold: Software selectable from - channel 2-50 in 1 channel steps. Upper Threshold: 3 MeV Adc Offset: software selectable Cosmic Channel: All pulses above 3 MeV are summed and recorded in the Cosmic channel as a direct measure of cosmic ray activity. Maximum Input Countrate: 100000 counts/sec. C. SYSTEM OUTPUTS • Visual Display - Front panel 640x200 • Electroluminescent high contrast graphics display allows full spectrum display, system set-up and various parameter monitoring functions. In the Spectrum display mode, ROI selection and cursor in Channel Number or keV. • Automatic Channel Number to Energy Level conversion compensates for the non-linearity of the Sodium Iodide detector light output. • Keyboard - front panel 21 button keyboard for easy operator control. • Fully menu driven system operation. Digital Outputs: - RS-232C port - 1200 to 19200 BAUD - full handshaking - IEEE-488 interface-talk or talk/listen mode. Selectable address as unit 1 to 15. - 8 bit parallel - "Geometric GR-800" compatible - 8 bit parallel - CENTRONICS or INTEL 8255 compatible. Digital Data Output Formats: - Header with Serial #, Real Time Clock, Detector configuration, Sample Time, Live Time, Cosmic channel, Resolution (FWHM), CHECKSUM and 8 ROI's (Window data). - Header + 256 channels DOWN spectrum data. - Header + 256 DOWN + 256 UP spectrum data • Remote control of Sampling on any of the digital ports (RS-232/IEEE-488 or parallel). Analog Outputs - 4 channels of ROI data selectable from the keyboard. - 0 - 10V output (10 bit resolution) - Scaling set from the keyboard - Output data may be in raw or stripped counts using internally stored constants.
- 4. D. MISCELLANEOUS Regions Of Interest (R.O.I.): - 8, selectable by keyboard with upper and lower limits individually set over the entire spectrum. - First 4 R.O.I, available for digital and analog output - Second 4 R.O.I, available only for digital output System Resolution: Detector Resolution is automatically computed for each crystal (and summed crystals) during peak analysis and displayed for operator monitoring when required. A user adjustable maximum level automatically alarms if exceeded. System Test: At POWER ON a full system test of all peripherals is performed including; Lithium back-up battery: system RAM memory: display handshaking: system configuration (options installed): detectors selected checked via ADC analysis: peripheral handshaking response... etc. Configuration Menu: Allows selection of number of detectors in use, confidence levels for gain analysis, selectable output configuration for analog and digital data and various special display/monitoring functions. Maintenance: Full set of special menus allow user to test and calibrate many system functions. Remote Maintenance: Optional unit permits connection of the GR-820 directly from its remote location to EXPLORANIUM's Service Department computer via telephone link to allow factory engineers to analyse system problems and advise on correct solutions [Future]. Mechanical: 19" wide x 5.25" high x 15" deep weight - 18 lbs. Power: 28V - 1 AMPS. E. DETECTORS • Specially designed hi-impact polystyrene cases using low background material formulated for minimum signal attenuation. • Full thermal and internal shock protection allows units to be directly mounted to vehicle floor. GPX-1024 • Crystals - 4 each 4" x 4" x 16" • Total Volume - 1024 cu. ins - 16.7 L. • Dimensions - 27.85" x 19.5" x 7.2 ins. - 70.7 x 49.5 x 18.3 cms • Pack - weight - 175 Ibs. - 80 Kgs * Ship - weight - 230 Ibs. - 105 Kgs • Power - 28V 0.5A-3 pin connector • Signal - 4 individual BNC outputs • Very low noise High Voltage power supply in EACH pack • Preamplifier with special signal processing for signal optimisation. • Power to detectors ONLY 28V - All other voltages are generated internally.