![AT
OK
AT+GMR0018000902-AI03
OK
AT+RST
OK
L.L_J~."B.@C..HzbgFZt(l`
[Vendor:www.ai-thinker.com Version:0.9.2.4]
ready
AT+CWMODE=1
OK
AT+CWLAP+CWLAP:(3,"GoldenGlory",-59,"90:94:e4:ef:76:10",1)
+CWLAP:(3,"MGTS_GPON_2813",-83,"cc:7b:35:82:8d:b0",1)
+CWLAP:(3,"MGTS_GPON_31F0",-88,"cc:7b:35:82:c8:de",2)
+CWLAP:(3,"Academy_guest",-66,"e2:43:f6:e1:0b:24",4)
+CWLAP:(2,"SB",-91,"d0:15:4a:ef:87:82",6)
+CWLAP:(0,"MTS/FON",-92,"d0:15:4a:ef:87:83",6)
+CWLAP:(4,"Eva",-93,"00:24:01:bb:fc:17",6)
+CWLAP:(4,"AKADO_WIFI",-79,"d4:bf:7f:06:2f:c0",9)
+CWLAP:(2,"UniversalRouterMTS_1F20",-92,"6c:2e:85:6e:1f:21",11)
+CWLAP:(3,"Academy_system",-52,"ec:43:f6:04:9c:e4",11)
+CWLAP:(3,"DrWeb_80",-83,"60:a4:4c:66:ff:cc",12)
+CWLAP:(4,"ZyXEL06113",-86,"cc:5d:4e:bb:e0:b8",13)
OK
AT+CWJAP="Academy_guest","cmitKIDS"
AT+CWJAP="Minion","thisguys"
OK
AT+CIFSR10.1.30.49
OK
AT+CIPMODE=0
OK
AT+CIPMUX=1
OK
AT+CIPSERVER=1,8888
OK
AT+CIPMODE=0
ERROR
AT+CIPMUX=1
OK
send commands (note: replace anything in {} below with real values):
AT+CIPSTART=”TCP”,”{domain}”, 80
AT+CIPSEND={length of GET request string below}
{wait for “>” string to be returned by ESP8266}
GET http://{domain + path} HTTP/1.0rnrn
AT+CIPSTART="TCP","192.168.0.100",53000
http://esp8266.ru/esp8266-at-commands-v019/](https://image.slidesharecdn.com/6i2cspi-150316124040-conversion-gate01/85/6-i2c-spi-4-320.jpg)
6 i2c spi шестое занятие
- 1. VCC, GND — питание платы (+3.3В); URXD,UTXD — выводы RS232 толерантны к 3.3В RST — Аппаратный сброс (reset) GPIO0, GPIO2 — выводы GPIO CH_PD — Chip enable, для работы должен быть подключен к +3.3В.
- 4. AT OK AT+GMR0018000902-AI03 OK AT+RST OK L.L_J~."B.@C..HzbgFZt(l` [Vendor:www.ai-thinker.com Version:0.9.2.4] ready AT+CWMODE=1 OK AT+CWLAP+CWLAP:(3,"GoldenGlory",-59,"90:94:e4:ef:76:10",1) +CWLAP:(3,"MGTS_GPON_2813",-83,"cc:7b:35:82:8d:b0",1) +CWLAP:(3,"MGTS_GPON_31F0",-88,"cc:7b:35:82:c8:de",2) +CWLAP:(3,"Academy_guest",-66,"e2:43:f6:e1:0b:24",4) +CWLAP:(2,"SB",-91,"d0:15:4a:ef:87:82",6) +CWLAP:(0,"MTS/FON",-92,"d0:15:4a:ef:87:83",6) +CWLAP:(4,"Eva",-93,"00:24:01:bb:fc:17",6) +CWLAP:(4,"AKADO_WIFI",-79,"d4:bf:7f:06:2f:c0",9) +CWLAP:(2,"UniversalRouterMTS_1F20",-92,"6c:2e:85:6e:1f:21",11) +CWLAP:(3,"Academy_system",-52,"ec:43:f6:04:9c:e4",11) +CWLAP:(3,"DrWeb_80",-83,"60:a4:4c:66:ff:cc",12) +CWLAP:(4,"ZyXEL06113",-86,"cc:5d:4e:bb:e0:b8",13) OK AT+CWJAP="Academy_guest","cmitKIDS" AT+CWJAP="Minion","thisguys" OK AT+CIFSR10.1.30.49 OK AT+CIPMODE=0 OK AT+CIPMUX=1 OK AT+CIPSERVER=1,8888 OK AT+CIPMODE=0 ERROR AT+CIPMUX=1 OK send commands (note: replace anything in {} below with real values): AT+CIPSTART=”TCP”,”{domain}”, 80 AT+CIPSEND={length of GET request string below} {wait for “>” string to be returned by ESP8266} GET http://{domain + path} HTTP/1.0rnrn AT+CIPSTART="TCP","192.168.0.100",53000 http://esp8266.ru/esp8266-at-commands-v019/