03 2013-14 embedded systems project list - non ieee based embedded - electronics - electrical - power electronics - 2013-14

NCCT
Final Year Projects
Promise for the Best Projects
PROJECTS 2013-14
NCCT
Embedded System Projects
NCCT, 109, 2nd
Floor, Bombay Flats, Nungambakkam High Road,
Nungambakkam, Chennai – 600 034, Tamil Nadu. Next to ICICI Bank,
Above IOB, Near Taj Hotel
www.ncct.in, www.ieeeprojects.net, ncctchennai@gmail.com
044-2823 5816, 98411 93224, 89393 63501
NCCTPROMISE FOR THE BEST PROJECTS
FINAL YEAR PROJECTS
2013-2014
EMBEDDED SYSTEM PROJECTS
* MICROCONTROLLERS *
* VLSI * DSP * MATLAB *
109, 2n d
Floor, Bombay Flats, Nungambakkam High Road
Nungambakkam, Chennai – 34
Near Ganpat Hotel, Above IOB, Next to ICICI
www.ncct.in, www.ieeeprojects.net
ncctchennai@gmail.com, projects@ncct.in
044-28235816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
EMBEDDED SYSTEM
PROJECTS
PROJECT AREAS
 MICROCONTROLLER PROJECTS
 VLSI PROJECTS
 DSP PROJECTS
 MATLAB PROJECTS
 BIO MEDICAL PROJECTS
 POWER SYSTEM PROJECTS
 POWER ELECTRONICS PROJECTS
 ELECTRICAL PROJECTS
 TELE COMMUNICATION PROJECTS
 BIO METRICS PROJECTS
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
 DIGITAL SIGNAL CONTROLLER PROJECTS
 MOTORS, DRIVES & CONTROL PROJECTS
 COMMUNICATION PROJECTS
 INSTRUMENTATION PROJECTS
 MECHANICAL PROJECTS
 MEMS / MECHATRONICS PROJECTS
 THERMAL ENGINEERING PROJECTS
 AUTOMOBILE / AUTOMOTIVE PROJECTS
 CONTROL ENGINEERING PROJECTS
 APPLIED ELECTRONICS PROJECTS
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
FINAL YEAR PROJECTS
2013 - 2014
Why NCCT
Complete Guidance * On time
Completion * Excellent Support
Multi platform Training *
Flexibility
PROJECTS SUPPORTS & DELIVERABLES
• Project Abstracts & IEEE Paper
• Project Block Diagram & Circuit
Diagram
• Datasheets and Manuals
• PPT & Review Details Guidance
• Project Report Guidance
• Working Procedure & Screen Shots
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Materials & Reference Books in
DVD
• Project Completion Certificate
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
FINAL YEAR PROJECTS
• American Sign Language based Hand Gesture Recognition &
Performance
• Energy Consumption – Energy Meter with Automatic Usage Monitoring
and Alarm System - Extra Power Requisition System
• Driver Fatigue Accident Prevention using Eye Blink Sensor
• Three Dimensional Password Authentication in ATM Networks
• Library Robot - Path Guiding Robotic System with Artificial Intelligence
using Microcontroller
• GPS and GSM based Biomedical Wearable Device for Remote Monitoring of
Physiological Signals
• Zigbee enabled Pantry Updation - Wireless Network and Data
Synchronization using Hand Held Device - Zigbee enabled 2 Way
• Implementation of Automated Multi Story Car Parking
• Boatbot – Design & Implementation
• Automatic Touch Screen based Vehicle Driving System
• Staircase Climbing Robot – Implemented in Multi-Domain Approach
• Alternative Energy Sources - Foot Power Generation
• Helping Hand for Disabled Person - Hand Gripper Robot
• Robotic Vision and Color Identification System with Solenoid Arm for
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Colored Material Separation
•Soil Moisture Content based Automatic Motor Starter for Irrigation
Purpose using Solar Energy
•Intelligent Train Engines and Hi Jack Control System or RF – Vehicle Hi
Jack – Train
• Advanced Collision Avoidance Solar Powered Robot Car with Automatic
Charger - Seek for Sun Light and Charges when the Battery Goes Down
• ASSIST - Automated System for Surgical Instrument and Sponge
Tracking
• Providing Group Tour Guide by RFIDs and Wireless Sensor Networks
•Coin Operated Cell Phone Power Charger
• Rail Track Inspector
• Cockpit White Box
• Trivector Meter – Design & Implementation
• Power Failure Auto Announcement System at Customer Place from E.B
Station
• Eye Ball Controlled Automatic Wheel Chair
• A Security Framework in RFID based License Plate
• Voice Operated & Head Movement Control Intelli Robotic Wheel Chair
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
For Specialty Operations
• Density Traffic Analyzer - Traffic Control System for Ambulance Service
Design & Implementation
• Flying Robot with Search and Rescue Feature for an Accident Area or
Natural Disaster Area
• Botrobo – Tanker & Sound Detecting Robot
• Ultrasonic based Vehicle Parking Guidance System
• Medi Kit - Advanced Home Care System for Elderly Person Patients with
Remote & Auto Dialer with BP
• Advanced Helmet for Bikes for Security Measures
• Iglass for Visually Impaired People
• Robotic Assisted Operation Theatre with Voice Control
• Boarding School Students Monitoring Systems (E-Id) using RFID
• Intelligent Fuzzy Control Guided Vehicle with Collision Prevention –
Ultrasonic based Distance Monitoring and Fuzzy based Collision Avoidance
• I Protect – Integrated Vehicle Tracking and Communication System with
Vehicle Command Unit – An Ultimate tool for Tracking, Real Time
Monitoring
• Multisensor - Smoke, Fire, Temperature, Gas, Metal & Intruder based
Security Robot - Zigbee
•Wireless Based Railway Bridge Damage or Track Fault Notification with
Alarm Systems
• Intelligent Transport System using Wireless Technologies
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Ultrasonic based Path Planning for the Blind Person
•Intelligent System for Hazardous Gas, Human Detection and
Temperature Monitor Control Using GSM Technology
• Alcohol Breath Analyzer / Alcohol Sensing Vehicle Starter System
• Advanced Robotic Floor Cleaner with Wall Sensors and RF Remote
Controller for Systematic Cleaning
• Effective Solar Tracking System for Optimal Power Generation and Lift
Operating Through Solar Power
• Touch Screen based Wheel Chair Implementation
• Anti Collision System in Railway & Location Monitoring using GSM and
GPS – Intelligent Train System with GPS
• Smart Tanker Robot for Security Operations in the Protected Area with
Wireless Secured Communication
• Intelligent Train System – Automation, Collision Avoidance, Signal /
Unmanned Controlling, Moving Message Display, Voice Annunciation
• Voice Recognition for Controlling Color Television
• Wireless Remote Motor Starter with Acknowledgement using Solar
Energy Power for Agricultural Application
• IVRS based Electronics Televoting with Response & Feedback
• Intelli Robotic Wheel Chair for Specialty Operations with Key Operations
and Advanced Path Planning Routing System
• Fuzzy Elevators - Group Elevator Scheduling With Advance Information
for Normal and Emergency Modes in Building Management Systems
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Alive Human Being Detector in War Fields / Affected Areas using WAP
with Model & Camera
• Design and Implementation of a Multiplex Parking System and Toll
Collection based on Time Management Techniques for Identifying the
Parking Violation based on Expiry Time
• Distance Protection – Power Theft Identification & Location Detection
• Judo Coat – Design & Implementation
• Person Identification System – RF ID System used for Tracking &
Authentication Purposes Applying Back Scattering Technology
• Wireless AI based Fire Fighting Robot for Relief Operations with Two
Way Communication
• Advanced GSM based Theft Vehicle Identifying System using Remote PC
• Smart Solar Tracking System for Optimal Power Generation
• Smart Wind Mill based Power Generation System for Mobile Charging
• Zigbee – College / Industry – Wireless Network and Data
Synchronization using Hand Held Device
• Development of Smart Notice Board – Active Information Display
Systems
• Mobile Robot -- Wireless Ai based Intelli Mobile Robot for Multi Specialty
Operations
• Remote Controlled Water Splash Robot for Gardening
• Wireless Intrusion Detection, Electronic Security & Control System
using Central Monitoring System
• Design and Implementation of Railway Automation System with Sensors
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Network
• Fingerprint and RFID based Multi usage Card System - Design and
Implementation
• Microcontroller based Portable Computer Aided Drug Dispenser Robot
• Temple Security System -- Hi End Temple Security System with
Frequency Jammer
• RF based Code Modulation – Decryption & Encryption for Secured
Wireless Communication with OFDM
• Voice Controlled & Activated Wheel Chair Robot for Physically
Challenged
• Anesthesia Control System using Infusion Pump with Heart Beat
Monitoring System
• Intelligent Train System with Collision Avoidance & Route Tracking
• Cell Phone Jammer - Implementation of Highly Effective Mobile Cell
Phone Jammer
• Automated Car Parking System with Automatic Gate Opener
• Coach Location Monitoring and Identification
• Smart AI based Image Capturing Robot with Sensors Network
• Cell Phone Controlled Ai based Five Axis Robot for Multi Specialty
Operations
• IVRS based Robot Control with Response & Feed Back
• Multiple Starters with Over Load and Low High Voltage Protection with
Multi Parameter Monitoring
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• RF based Intelligent Handheld Multi-Parameter Monitoring System with
LCD Display and DAS
• Wireless Hybrid SCADA for Power Station Substation Monitoring &
Automation
• Dish Position Controlling and Monitoring System Used for Radar &
Other Telecommunication Applications
• Intelligent Power Sharing of Transformers with Auto Protection
• Prepaid Electricity Billing RF 2 Way Automation using Contact Less
EMPCR Card & Reader with Voice Annunciation - IVRS
• Energy Saving System using Thyristor Controllers
• Finger Print based Physical Access Control Vehicle Immobilizer
• RF enabled Energy Meter Digitization & Automation and Automatic
Utility Transfer with Two Way Communication
• Speed Control of a Linear Induction Motor V/F Technique
• Fuzzy based Speed Control of Induction Motor using Microcontroller
• Noise Less Speed Control of DC Motor using PWM Converter
• Natural Failure Protector
• PH Measurement
• Implementation of Secured Black Box in Aircraft
• Snake Robot – Serpentine Robot for Industrial Inspection and
Surveillance
• Blue Tooth Jammer for Security Application
• Artificial Intelligence based Security for Telephone Exchange with
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
SCADA
• Microwave Spy Camera Jammer
• IVRS based Students Mark Annunciation for their Parents
• GPS based Active Fleet Management- Featured Rich Automatic Vehicle
Location Tracking, Collision Avoidance with Dual Communication using RF
• Wireless Mouse Movement Recognition with VGA Display using Touch
Screen
• Self Path Identification and Navigation Robot using Touch Screen
• Infant Incubator Parameter Sensing & Monitoring through ZIGBEE
Wireless
• Sleep and Wake Categorization with ECG and Respiratory Effort Signals
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
EMBEDDED PROJECTS
DOMAIN WISE
BIOMEDICAL
PROJECTS
• ASSIST - Automated System for Surgical Instrument and Sponge
Tracking
• A Portable Wireless Eye Movement-Controlled Human-Computer
Interface for the Disabled
• ICU - Wearable Biomedical Sensors & Systems -- Wearable Body Sensor
Networks with BP
• ICU - Smart Medicare Patient Monitoring System
• Ultrasonic based Path Planning for the Blind Person
• Anesthesia Control System using Infusion Pump with Heart Beat
Monitoring System
• Heart Beat Rate Monitoring System - RF based Wireless Heart Beat Rate
Monitoring System
• Peritoneal Dialysis – Design and Implementation of Blood Purification
System
• Blood Pressure Analysis on Treadmill Environment
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Blind Stick with Audio & Video Interface
• Infant Monitoring System
• Smash – Smart Medical Automated System Handheld Device with
Wireless Technology
• Monitoring System for Premature Babies
• Eyeball Sensor for Automatic Wheel Chair Movement for Paralyzed
Patients
• Hand Talk – Assistive Technology for the Dumb
• Hospital Automation with Patient Monitoring
• Advanced Home Care System for Patients (Adhoc)
• Glucose Level Monitoring and Predicting System
• Intelligent “Prescription Drugs Abuse” and Addiction Control System
using RF / Proximity Cards
• A Wireless Bio-Implantable Device for Monitoring Vital Body Parameters
of Transgetic Mice with Mems Technology
• Advanced Remote Temperature and Heart Rate Monitoring System
• Artificial Hands for Physically Disabled
• Artificial Weaning Analyzer using Neural Network / Neural Network
based Vital Sign Monitor and Control
• Bed Side Patient Monitoring System with BP & RF
• Blind Identification and Equalization of FIR – Finite Impulse Response
• Complete Body Scanning System with BP & RF
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Defibrillator, External – ECG Monitoring Device While Transit
• IGlass for Visually Impaired
• Intelligent Mobile based Patient Monitoring System
• Measurement of Inhaled / Exhaled Respiratory System
• Medi Kit - Advanced Home Care System for Elderly Person Patients with
Remote & Auto Dialer with BP
• Monitoring Functional Arm Movement for Home based Therapy After
Stroke
• Wireless Telemetry for Line Data Transmission on a Mobile Unit
• Zigbee based Medi Care - Patient Monitoring System with WAP RF BP
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
INTELLIGENT
TRANSPORT SYTEM
• Vehicle Safety Speed Controller under Driver Fatigue using Eye Blink
Sensor
• Intelligent Transport System using Wireless Technologies
• Density Traffic Analyzer - Traffic Control System for Ambulance Service
• Rail Track Inspector
• Coach Location Monitoring and Identification
• Design and Implementation of Railway Automation System with Sensors
Network
• Cockpit White Box
• Parameters Checking Before Take Off
• Testing of Aircraft Box and Accessories before Take off
• Bidirectional Communication Aircraft Landing System – ALS
• Data Acquiring System for Airports
• Radio-Controlled Surveillance System for Borders and Restricted Areas
– Flying Helicopter Ariel View System
• Real Time Mid-Air Fight Collision Avoidance System with Auto Warning
& Flight Id, Position, Monitoring through Radio Frequency Link & PC
• Auto Flight Pilot Simulation Applied in Real Time & Remote Monitoring
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
using High Speed RF Data Link for UAV / Flight
• Wireless Sensor Network based Model for Secure Railway Operations –
Performance, Computing & Communication Conference
• Advanced Train Compartment Information Display System for Modern
Railways
• Automatic Railway Gate Signaling Simulator & Controller
• Automated & Unmanned Control System of Railway crossing using
Wireless IR Sensor
• Model Railroad Automated Track Inspection Car
• Blind Spot Location Identification - Bus Alert System for Vision Impaired
People
• Vehicle Emission -- Automated Vehicle Emission Testing (Co2) and
Issuing online Certificate
• Traffic Control System for Effective Ambulance Service – Design &
Implementation
• Ticket Dispenser & Entry Lane Control Tower for Parking System
• Intelli Public Transport System – Bus Status – Arriving / Leaving /
Breakdown indication System in the Bus Stop
• Intelligent E-Police & Traffic Violation Automatic Recorder System for
Modern City Traffic using most Advanced Wireless Sensor Technology in
Real Time
• Intelligent, Automatic & Modern Traffic Light Controller based On Traffic
Density
• Interactive Environmental Air Pollution Monitoring Automatic Phone
Dialing System
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Automated Accident Identification, Detection via Vibration Sensors
using RF Technology
• Automated Bus Ticket Tariff Calculation using Identification of
Destination Point
• Automated Car Parking System with Automatic Gate Opener
• Advanced Digital Wireless Entry / Exit Register System for Time Control
in Bus Stand with Remote Monitoring using PC
• An Enhanced Parking Lot Service Model using Wireless Sensor Network
• Application of Fuzzy Logic in Intelligent Traffic Control Systems
• Automatic Auto Head Lamp Dim - Dip, Bright Illumination, Brightness
Control System of A Vehicle
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
ROBOTICS
PROJECTS
Robotics & Communication Projects –
Wired & Unwired
ROBOTICS PROJECT WITH REAL TIME
MECHANICAL MODELS
• Staircase Climbing Robot – Implemented in Multi-Domain Approach
• Helping Hand for Disabled Person - Hand Gripper Robot
• BotRobo – Tanker & Sound Detecting Robot
• Advanced Collision Avoidance Solar Powered Robot Car with Automatic
Charger - Seek for Sun Light and Charges when the Battery Goes Down
• Mobile Robot -- Wireless Ai based Intelli Mobile Robot for Multi Specialty
Operations
• Smart Tanker Robot for Security Operations in the Protected Area with
Wireless Secured Communication
Security Robot – Zigbee
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Voice Controlled & Activated Wheel Chair Robot for Physically
Challenged
• Intelli Robotic Wheel Chair for Specialty Operations with Key Operations
and Advanced Path Planning Routing System
• Alive Human Being Detector in War Fields / Affected Areas using WAP
with Model & Camera
• An intelligent Mobile Robot Navigation Technique using RFID
Technology
• Robotic Vision and Color Identification System with Solenoid Arm for
Colored Material Separation
• Robot with Search and Rescue Feature for an Accident Area or Natural
Disaster Area
• Boatbot – Design & Implementation
• Advanced Robotic Vacuum Cleaner with Wall Sensors and RF Remote
Controller for Systematic Cleaning
• Snake Robot – Serpentine Robot for Industrial Inspection and
Surveillance
• SMS based Controller – Robot Control
• Remote Controlled Water Splash Robot for Gardening
• RF Remote based Fire Fighting Robot for Relief Operations with Auto
Dialer Facility
• Smart AI based Image Capturing Robot with Sensors Network
Operations
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• PC Controlled Advanced Wireless Robot Vehicle with Camera for Bomb
Detection / Human Surveillance Application for Dangerous Areas
• The OmniTread Serpentine Robot for Industrial Inspection and
Surveillance
• Design & Implementation of Grass Shredding Robot
• Autonomous Robot with Obstacle Avoidance, Drive Wheel
Synchronization and Line Tracking Capability
• Wall Follower Robot with the Help of Multiple Artificial Eyes
• Medical Robot – Design & Implementation
• PCB Drilling System using Robot Known as Cartesian Robot
• Remote Robot Control System based on DTMF of Mobile Phone
• Sensor Rich Tele-Operational Mode Robotic Bush Fire Fighting
• Robotics Assistance to Protection Services: Users Requirements
• Motion Detection, Robotics Guidance and Proximity Sensing using
Ultrasonic Technology
• Intelligent Escort Robot Moving Together with Human
• Towards the Autonomous Navigation of intelligent Robots for Risky
Interventions
• Testing Multi-Robot Systems for Operation in Risky Environments
• The Watchdog - Robot inspector for An Area That Is Prone to intruders
and Possible Fire Hazards
• Usability Analysis of a PDA-based User interface for Mobile Robot
Teleoperation
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Design and Development of Line Follower Robot using the Principle of
Reflection of Light Rays
• Dynamic Robot Networks for Search and Rescue Operations
• Communication Issues in Distributed Multisensory Robotics
• Walking Robot for Impaired Peoples – Muscle Weakness
• An Autonomous Assistant Robot for Book Manipulation in a Library
• Self Guided Pedestrain Crossing Robot for Blinds and Elderly Persons –
Walking Stick
• Electromagnetic Magnetic Type Pick and Place Robot for Materials
Handling
• A Robust Architecture for Autonomous Robot Navigation and Control
• A Mobile Platform for Nursing Robots
• Rescue Robotics for Biomedical and Life Saving with Artificial
Intelligence
• A Novel Robot System for Surface inspection and Diameter
Measurement of Large Size Pipes
• Advanced Human Detecting and Self-Guided Robotic Waiter for Hotels
• Self Guided Object Tracking & Following Mobile Robot for Factories &
Mining Areas
• Walking Robot with Hyper Line Tracker using IR Sensors for Uneven
Terrain
• Vision Guided Law Enforcement Robotic Helicopters – A Revolutionary
New Interface
• Advanced Miniature based Wireless Camera Monitoring System for
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Wildlife Application
• An Assistive Robotic Device that CAN Synchronize to the Pelvic Motion
During Human Gait Training
• Automatic Collision Avoidance and Real Time Distance Monitoring
• Automatic, Advanced Robotic Arm for Welding in Automated Assembly
Line
• Cell Phone based Materials Handling Robot
• Cell Phone based Robot Direction & Alive Human Detecting
• Cell Phone Controlled Fire Fighting Robot for Relief Operations
• Cell Phone Controlled Smart Image Capturing Robot
• Collision Avoidance By the Fusion of Different Beam-Width Ultrasonic
Sensors & Rescue Robot using PIR Sensor
• Design & Implementation of Real Time Security Guard Robot using GSM
CDMA Networking
• Design & Development of Obstacle Sensing and Object Guiding Robot
• Distance Monitoring & Object Detecting Robot By RF Technology
• Distributed Sensors Fusion for Object Position Estimation and
Approaching By Robotic System
• Drishti: An Integrated Navigation System for Visually Impaired
&Disabled
• Electronic Nose for Robotics
• Fire Ball for Fire Extinguishing with Robot Model
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Fire Sensing Robot with Auto Dial-Up Facility & No Extinguisher
• Gas Detection Robot for Atomic Power Station
• Human Step Rehabilitation using A Robot Attached to the Pelvis
• Hyper Line Tracking Control of Robotic Car using Track Sensors for
Industrial Application
• Intelligent Fire Sprinkler System
• Fire Fighting Robo using Ultrasonic Technology
• IVRS based Control of Alive Human Being Detector with Voice Feedback
• Motion Activated Wireless Video Capturing System for Security Wild Life
Application
• Path Guiding Robotic System with Artificial Intelligence
• PC Controlled Alive Human Being Detector in War Fields / Affected
Areas using WAP with Model & Camera – PIR Sensor for Rescue Operations
with 2 Way Communication
• Programmable Surface Cleaning Robot using Blowers
• SMS Controlled Intelli Robot Materials Handling
• Most Advanced Land Roever with Wireless Remote Control using PC
with Camera and Solar Cell Power
• Rescue Robot for Military Purpose with Voice Annunciation using PIR
Sensor and Metal Detection
• RF - Remote Location Controlled Alive Human Being Detector Model
• Robotic Exploration in Under Water with Remote RF Controller and 2.4
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Ghz Automatic IR Cameras for Night Vision and Remote Receiver
• Robotic Technology Integration for Army Ground Vehicles – Zigbee
• Automatic Human Seeker Robot with Human Body Heat Scanner
• SMS based Alive Human Detector in Affected Areas / War Fields
• SMS enabled towards Command & Control Networking of Cooperative
Autonomous Robotics for Military Applications
• The Guide CAN – Applying Mobile Robot Technologies to Assist the
Visually Impaired
• Ultra Sound Guided Collision Avoidance and Navigation Robotic System
for Multiple Applications
• Visual Surviving and Multi Directional Light Signature Sensing and
Approaching Robot with Edge Detector for Tunnel Application
• Climbing & Walking Robot for Uneven Terrain and Disaster Area
Application
• Voice based Path Control of Robot Via the PC using RF Communication
Technology
• Voice Control / Speech Recognition Alive Human Detector
• Voice Control / Speech Recognition Fire Fighting Robot for Relief
Operations
• Voice enabled Image Capturing and Transferring to PC using Robot
• Voice enabled Pyroelectric Infrared Sensor based Security Alert System
for the Safer Guarding
• Walking Robot with Infrared Sensors / Light Sensors / RF Sensor /
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Tactile Sensors
• Wireless AI based Fire Fighting Robot for Relief Operations with Two
Way Communication
• Zigbee enabled Alive Human Being Detector Model with Camra
• The development of intelligent home security robot
• SMS Based automatic vehicle accident information system
• Artificial Intelligent Based Automatic Path finding Cum Video Analyzing
Robot
FINGERPRINT
PROJECTS
• Finger Print Verification for Passport Checking
• Finger Print based ATM Authentication & Money Management System
• RF ID & Finger Print based Campus Access Control System
• RF ID & Finger Print based Electronic Passport – Multi Management
System
• Finger Print based Campus Management System
• Finger Print based Digital Locker Security
• Finger Print based Digital Voting Machine
• Finger Print based Physical Access Control Vehicle Immobilizer
• Finger Print Identification / Recognition based Equipment Control
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
System
• Enterprise Security using USB Finger print Scanner
• Bio-Finger Sensing Gate Opener for Security
• Finger Print Authenticated, Access Control & Automated Door Opening
System
• Finger Print based Authentication and Controlling System of Devices
• Finger Print based Authentication, Access Control, Time, Attendance
Management System
• Finger Print based Car Lock Security System
• Finger Print based Guard Alert System
• Finger Print based Inter Electromagnetic Door Locking System
• Finger Print based Time, Attendance & Library Management System
• Finger Print based Vehicle Access System
• Finger Print Recognition based Time Recorder with Weigh & Output
• Finger Print Identification based Home Automation with Advanced
Sensor
• Finger Print Based Medical Information Retrieval & Patient Information
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
RF-ID PROJECTS
Unwired Communication Projects
• The Electronic Passport & The Future of Government Issued RF ID
based Identification
• Providing Group Tour Guide by RFIDs and Wireless Sensor Network
• RF ID / Proximity based Multi Usage Card
• Person Identification System – RF ID System used for Tracking &
Authentication Purposes Applying Back Scattering Technology
• An RFID based Pilgrim Identification System
• RF ID Proximity based Checking & Detecting Expiry Date (S), Stock
Updation
• Advanced and Intelligent Distant Vehicle Identifying and Automatic
Entry System using Active RF ID
• Automatic Vehicle Toll Collection & Gate Entry Exit System using RFID
• RFID / Proximity based Pharma Health Card
• A New Concept for Vehicle Localization of Road Debiting System using
RF Id / Active RF System – Intelligent Vehicles
• Automated and Unmanned Parking System using RFID Technology
• Advanced Digital Wireless Automatic Vehicle Register System for
Highways
• Advanced Miniature Radio Collar Tracking System for Wild Life
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Application
• A Security Framework in RFID based License Plate
• GPS & RFID based Intelligent Guided Vehicle
• Automatic Locker Machine - Design & Implementation, using RFID &
Embedded Microcontroller
• Intelligent Retail Business: Location based Services for Mobile
Customers
• RFID based Animal Location Tracking and Identification System
• RFID / Active RF based Equipment/ Personnel Tracking in Hospitals
• RFID based Parking Lot Access and Control, Vehicle Tracking in Rental
Lots
• RFID based Virtual Gate Entry Control
• Security and Privacy in RFID and Applications in Telemedicine –
Communications
• RFID based Customer Loyalty Programs
• RFID Asset Tracking & Monitoring
• RFID Applications Strategy and Deployment in Bike Renting System
• RFID based Automated Airline Baggage Systems
• Security and Privacy in RFID and Applications in Telemedicine –
Communications
• RFID based Customer Loyalty Programs
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• RFID Asset Tracking & Monitoring
• RFID Applications Strategy and Deployment in Bike Renting System
• RFID based Student Tracking System
• Secure Voting Through ATM Booths
• RFID based Industrial Security System
• Automatic Shopping & Billing in Super Market
• A RFID System to Help Visually Impaired People in Mobility
• RFID based Canteen Automation
• A Mobile RFID -Tracking Security System
• An RFID Application for the Disabled: Path Finder
• Application Field of RFID in Health Safety and Environment
Management
• People / Visitors Tracking and Management with Area Localization /
Monitoring and Warning System using E-Ticket and Super RFID for
Amusement Park / Child Care / Play School in Real Time
• Performance Evaluation of Operational Parameters on RFID Controlled
Conveyor System
• Personnel and Equipment Locating System and Tracking for Mining
Solution using Super Active RFID Network Technology in Real Time
• In Amusement Park / Visitor using Super RFID with in/Out Time
• GIDS – A System for Combining RFID -based Site information and Web-
based Data for Virtually Displaying the Location on Hand Held Devices
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Super Active RFID and Remote Access through Telephone Line
• Location based Human Identification and Tracking System using RFID
• Contactless Electromagnetic Proximity based Campus Management
System
• Contactless Electromagnetic Proximity based Public Transport System
• Data Storage and Remote Data Access using Super RFID
• RFID based Parking Lot Access and Control, Vehicle Tracking in Rental
Lots
• RFID based Prescriptions in Automated Pharmaceutical Systems
• RFID based Unmanned Automated Electric Power Tariff Calculation by
the Remote EB Station
• RFID based intelligent Books Shelving System
• RFID based Car Security Systems
• RFID based Equipment/Personnel Tracking in Hospitals
• RFID based Multi Usage / Purpose Card System Design &
Implementation
• RFID based Valuable Objects Insurance Identification
• RFID based Vehicle Tracking and Monitoring System
• RFID Fare Verification - RFID Bus Pass System
• Industrial Container CARGO monitoring and management using RFID
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• RFID based Automatic Toll Tax Deduction System
• RFID based Blind man Stick
• RFID based Electronic Road Pricing for Controlling the Traffic
• RFID based Event Tracking System for Sports
• RFID based Inventory Tracking System
• RFID based Parts Tracking System for Manufacturing
• RFID based Prepaid Energy Meter with Recharge Option
• RFID based Railway Platform to Display Exact Position of Each Coach
• RFID based Railway Reservation
• Super Active RFID Applied in Cold Chain Logistics / Transportation
with Temperature Reading and Monitoring in Real Time
• Super Active RF Tag based Long Range Vehicle Data Access System for
Traffic Monitoring with Multi Direction, Speed and Id for Automatic Data
Access, Monitor and Analyzing
• Super RF Tag Applied in Hospital and Medical Care industry for Locating
Major Assets and Personnel in Real Time using Miniature Active RF
Network
• SIP-RLTS: An RFID Location Tracking System based On Sip
• Shopping Path Analysis and Transaction Mining based On RFID
Technology
• Shortest Travel Distance for Full Reads on Least RFID Friendly Carton
Stacking Configuration using Advance Doe Technique & Age
Reproducibility & Repeatability
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Super RFID Applied in Automatic Visitor / Tourist Guide information for
Personnel Announcement and Visitor Evaluation System Replacing
Conventional Guide
• Unmanned Automatic Target Approaching Vehicle Applied for Blind
using Super Active RFID
• Utilizing RFID Signaling Scheme for Localization of Stationary Objects &
Speed Estimation of Mobile Objects
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
GPS PROJECTS
GPS, GSM, TELECOMMUNICATION,
COMMUNICATION PROJECTS
WIRED AND UNWIRED
• GPS and GSM based Biomedical Wearable Device for Remote Monitoring
of Physiological Signals
• Anti Collision System in Railway & Location Monitoring using GSM and
GPS – Intelligent Train System with GPS
• I Protect – Integrated Vehicle Tracking and Communication System with
Vehicle Command Unit – An Ultimate tool for Tracking, Real Time
Monitoring
• Passenger Information System using GPS
•Intelligent System for Hazardous Gas, Human Detection and
• Zigbee based Smart Vehicle System – Track, GPS based Vehicle
Tracking, Protection & Security System
•An Automatic Collision Detection and Acceleration Control using Multi
Zone Transmission and Reception through RF Technology and GSM
Communication
• Anti Collision System in Railway using GSM and GPS
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• GPS – Design & Implementation of 2 Way Communication System with
Transmit & Reception of Data using RF
• GPS based Active Fleet Management- Featured Rich Automatic Vehicle
Location Tracking, Collision Avoidance with Dual Communication using RF
• GPS GSM based Aircraft Collision Detection & Avoidance
• GPS & GSM based Accident Alarm System
• Real Time GPS based Vehicle Parameter Monitoring with Intelligent Data
Analysis
• GPS based Substation Implementation
• GPS based Intelligent Guided Vehicle with Collision Mitigation -
Automatic Vehicle Location Tracking, Collision GPS - Route Tracking
System using PC with 2 Way Dual Channel Communication
• Embedded based GPS for Telephone Exchanges
• Advanced Automatic Vehicle Crash Notification using GSM Technology
• Automatic Vehicle Locator (AVL) using Global Positioning System (GPS)
• GPS based Highway Monitoring & Control
• GPS enabled PC based Geographic Information System (GIS) & Routing
Scheduling System
• GPS based automatic route announcement system for blind people
• GPS based automatic station announcement and display system for
trains/buses
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• GPS based bus or train collision avoiding system
• GSM and GPS based human tracking system
• Fabrication of GPS Robot
• Railway anti-collusion system using GPS
• GPS based Air Craft Collision Avoidance
• GPS & GSM based Real Time Vehicle Tracking System
• GPS and GSM based Real Time Bus/Train Location Finder and Display
on Earth's Map
• GSM and GPS based School Kids Tracking System.
• GSM based Automatic Irrigation Water Controller System
• GSM based Highway Road Traffic Monitoring System.
• GSM based Home Security System to get intrusion Alerts Like
Door/Windows Open Alerts onto Your Cell Phone
• GSM based Irrigation Control System
• Standalone GPS Coordinates (Latitude, Longitude) Locater
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
VOICE-HM2007
PROJECTS
• Voice Controlled Intelli Robot for Multi Specialty Operations
• Voice based Activation and Control of Equipments
• Voice based Elevator Movement and Display
• Voice Control based Speed Control of Dc Motor
• Voice Recognition for Controlling Color Television
• Voice Communication Over Zigbee Networks
• Voice Control / Speech Recognition Alive Human Detector
• Voice Control / Speech Recognition Car Security System
• Voice Control / Speech Recognition Home Automation
• Voice Control / Speech Recognition Locker Security
• Voice Control / Speech Recognition Rescue Robot for Military Purpose
using PIR Sensor and Metal Detection
• Voice Control / Speech Recognition Voting System
• Voice Operated Modern Restaurant System
• Voice Recognition based Access Control System for Door Opening &
Closing using Microcontroller & Voice Hm2007 IC
• Voice Recognition based Robotic Car
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
JAMMER PROJECTS
• GSM / CDMA / DCS Tri Band Jammer
• Cell Phone Jammer - Implementation of Highly Effective Mobile Cell
Phone Jammer
• Blue Tooth Jammer for Security Application
• Hi End Temple Security System with Frequency Jammer
• GPS Jammer
• Microwave Spy Camera Jammer
• Effective Signal / Frequency Jammer System for Security & Protection
• All Band Radio Jammer for Military Application
• Advanced Radar Jammer for Military Application
• Anti Bomb Explosion Frequency Jammer
• Cell Phone Booster / Repeater
• Practical Implementation of Full Band Radio Jammer for Security
Application
We can design and develop any Jammer Applications /
Repeaters / Boosters
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
ZIGBEE
PROJECTS
UNWIRED COMMUNICATION PROJECTS
• Zigbee enabled Pantry Updation - Wireless Network and Data
Synchronization using Hand Held Device - Zigbee enabled 2 Way
• Automatic Employee Tracking System using Zigbee Network and I2c
Memory Card Reader
• Zigbee based Wireless Weather Station
• Zigbee – College / Industry – Wireless Network and Data
Synchronization using Hand Held Device
• Zigbee enabled ICU Care Taker - Life Support System
• ZIGBEE based Infant Incubator Parameter Sensing & Monitoring
• Real Time Passenger information System (RTPIS) using Zigbee
Technology
• Development of Zigbee based Street Light Control System
• Development of Zigbee-based Electronics Ballast System
• Remote Power On/off Control and Current Measurement for Home
Electric Outlets based on a Low-Power Embedded Board and Zigbee
Communication
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Automated Roll Call with Palm based Device using Zigbee – SRD / ISM
Band
• Zigbee Data / Voice Communication System for Industrial Application
• Zigbee Device Detector for Safety Application
• Zigbee Enabled Speed Control of DC Motor
• Zigbee Voice Communication System for Industrial Application
• Hand Held Device - Restaurant Services Management & Attendance
Monitoring, Data Transfer, Updation
• Zigbee Enabled Miniaturized Mote Control
• A Wireless Network based on the Combination of Zigbee and GPRS
• A Zigbee based Power Monitoring System with Direct Load Control
Capabilities
• Bus Priority Control System based on Wireless Sensor Network (WSN)
and Zigbee
• Commercial Applications of Wireless Sensor Networks using Zigbee
• Custom Wireless Sensor Network based on Zigbee
• Design of Air Pollution Monitoring System using Zigbee Networks for
Ubiquitous City
• Development of Zigbee based Street Light Control System
• Patient Monitoring System using Sensor Network based on the Zigbee
• Remote Engine Performance Monitoring and Logger System using
Zigbee and I2c
• Remote Power on/off Control and Current Measurement for Home
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Electric Outlets based on A Low-Power Embedded Board and Zigbee
Communication
• Realization of Home Remote Control Network based on Zigbee
• System for Measuring Power Supply Parameters with Zigbee
Connectivity
• Tea: Transmission Error Approximation for Distance Estimation Between
Two Zigbee Devices
• The Implementation of Indoor Location System to Control Zigbee Home
Network
• Wireless Automation of Unmanned Railway Crossing Gate Alert System
using Zigbee
• Zigbee based Dynamic Control Scheme for Multiple Legacy IR
Controllable Digital Consumer Devices
• Zigbee based Gas Leak Detection and Data Monitoring System
• Zigbee based Money Transfer System
• Zigbee based Monitoring System using Auto-Dialer
• Zigbee based Wireless Sensor Networks and Its Applications in Industry
• Zigbee Device Access Control & Reliable Data Transmission based
Health Monitoring
• Zigbee for Building Control Wireless Sensor Networks
• Zigbee Source Route Technology in Home Application
• Zigbee Wireless Sensor in Industrial Applications
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Wireless - RF Tx Rx, GSM/GPRS, GPS, Bluetooth, IrDA,
RFID, Zigbee
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
TELECOMMUNICATION
PROJECTS
• Energy Consumption – Energy Meter with Automatic Usage Monitoring
and Alarm System - Extra Power Requisition System
• Three Dimensional Password Authentication in ATM Networks
• GPS and GSM based Biomedical Wearable Device for Remote Monitoring
of Physiological Signals
Station
• Temple Security System - Hi End Temple Security System with
Frequency Jammer
Operations
SCADA
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• IVRS based Smart Networked Home - Home Automation System
• Zigbee based Wireless Multi Channel Home Automation System with
IVRS
• Industrial Automation and Control System IVRS - Remote Location using
Remote Connection, with Immediate Voice Feedback
• Mobile to PC interface for Controlling of Devices using interactive Voice
Response System
• Intelligent & Automatic Fire Security System using Interactive Voice
Decoder and Telephone Line
• Categorized Alarm Annunciation with Voice Annunciation and Controls
• SMS based Remote Motor Starter for Irrigation in Agricultural
Application
• IVRS based Automatic E-Filing Tracking and Monitoring, Localization,
Tracking Applied in Modern Administration Automation
Systems using SMS based on Microcontroller
• Design and Implementation of Real Time Security Guard Robo using
GSM/CDMA Networking
• Automatic Taxi Trip Sensing and Indicating System through GSM
• Intelligent System for Hazardous Gas, Human Detection and
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• An Automatic Collision Detection and Acceleration Control using Multi
Zone Transmission and Reception through RF Technology and GSM
Communication
• Anti Collision System in Railway using GSM and GPS
IVRS PROJECTS
Interactive Voice Response System using APR
• Finger Gesture Recognition using Flex Sensors with Voice Output
• IVRS based Smart Networked Home - Home Automation System
• Zigbee based Wireless Multi Channel Home Automation System with
IVRS
• Industrial Automation and Control System IVRS - Remote Location using
Remote Connection, with Immediate Voice Feedback
• Mobile to PC interface for Controlling of Devices using interactive Voice
Response System
• Intelligent & Automatic Fire Security System using Interactive Voice
Decoder and Telephone Line
• Categorized Alarm Annunciation with Voice Annunciation and Controls
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• IVRS based Automatic E-Filing Tracking and Monitoring, Localization,
Tracking Applied in Modern Administration Automation
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
COMMUNICATION
PROJECTS
Wired – RS232, RS485 & Unwired –
RF, Zigbee, RFID
• A Vehicle-to-Vehicle communication Protocol for Cooperative Collision
Warning
• RF based Code Modulation – Decryption & Encryption for Secured
Wireless Communication with OFDM
Systems
• A Miniaturized Mote for Wireless Sensor Network
• Development of pedestrian-to-vehicle communication system prototype
for pedestrian safety using both wide-area and direct communication
• Car-to-Car Communication
• A Computerized Travel Aid for the Active Guidance of Blind Pedestrians
• A Design of A Prototypic Hand-Talk, Assistive Technology for the Deaf
• A Distributed, Adaptive Protocol for Handling Interference in Wireless
Communications
• Enabling / Disabling & Wireless Control of Appliances & Devices using
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
RF Technology
• Fully Automatic Intelligent Wireless Remote Railway Gate Controller &
Monitoring System with Remote Train Stopper for Railway using Active RF
Id System
• Machine-to-Machine Communication in Cellular Networks
• Reduction of Disturbance Effects and Sustained Oscillation using Multi-
Sensor Implementing Wireless Communication
• Remote Communication Devices for Electric Utility Applications, Electric
Power Conference
• Remote Mobile Phone Motor Starter for Irrigation Purpose
• Wireless Automatic Traffic Signaling System
• Wireless Intrusion Detection, Electronic Security & Control System
using Central Monitoring System
• Wireless Telemetry for Line Data Transmission on A Mobile Unit
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
SECURITY SYSTEM
PROJECTS
• Integrate Intelligent Security System for Industrial Surveillance with
WAP & Auto Dialer
• Intelli Home Security System with Auto Dialer, Peace Keeper – The Home
of Tomorrow
• Smart Room Controller using Human Presence Detector
• Wireless Voting System
• A Low-Cost Solution for an Integrated Multisensor Lane Departure
Warning System
• Intelligent Briefcase with Digital Code Lock and Shock Generator during
Unauthorized Access
• Secret Codes & Secured Messages Transmission System through
Telephone Line
• Smart Card based Human Identification & Personal Management System
• Spy Camera Detector for Safety Application
• Modern Wireless Entry / Exit Register & Alarm Display System for
Advanced Amusement Park
• Implementation of Wireless Surveillance / Emergency Rescue Monitoring
Vehicle with Wireless Camera using Microwave Frequency with Microwave
Audio / Video Transmission
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Advanced Digital Wireless Multi Point Security System for Fire Safety
with Alarm
• Advanced Wireless Bank Security System with Remote Alarm and
Sensor for Modern Security Application
• Aircraft Airbox Ground Tester with Aircraft Accessories
• Autonomous Helicopter System with Security System
• Combination Lock for Security Applications
• Design and Implementation of Mobile based Electrical Appliances
Control for Industrial Automation with High Security
• Embedded System based Inter Locking System of Electromagnetic
Doors
• Finger Print / Bio Metrics based Industrial Authentication & Access
Control System
• Industrial Security Robot with Multi Specialty Features
• Intelligent Car Security System using Dynamic Generation of Random
Security Codes
• Intelligent Information System for Police
• Interactive Earthquake Monitoring & Low Frequency Vibrations & Noise
Sensing System
• Mobile Device Security using Transient Authentication
• Multi - Zone Fire Alarming Control Panel with Zone Location, Auto Dialer
to Fire Station
• PC based Home Appliance Control System
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Safe – Secure Anti Frequency Eliminator
• Safe Street Crossing System for Vision Impaired People
• Secure Transmission of Sensitive Data using Multiple Channels
• Voice Control / Speech Recognition Car Security System
• Wireless Access Monitoring & Control System based on Digital Door
Lock
• Wireless Aircraft Automatic Landing System
• Wireless LAN with Mono Alphabetic Substitution
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
SENSOR BASED
PROJECTS
Sensors Network & Wireless
Sensors Network Projects
• Advanced Wireless Automatic Digital Pumping System for Agriculture
using Soil Sensor
• Advanced Wireless Earth Quake Alarm System for Early Warning
• Temple Security System -- Hi End Temple Security System with
Frequency Jammer
• Integrate Intelligent Security System for Industrial Surveillance with
WAP & Auto Dialer
• Driver Fatigue Accident Prevention using Eye Blink Sensor
• Eye Ball Controlled Automatic Wheel Chair
Security Robot - Zigbee
• RF Enabled ICU Care Taker – Life Support System
• American Sign Language based Hand Gesture Recognition &
Performance
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Advanced Wireless Bank Security System with Remote Alarm and
Sensor for Modern Security Application
• Design & Implementation of Railway Automation System with Sensors
Network
• Motion Detection, Robotics Guidance & Proximity Sensing using
Ultrasonic Technology
• Real Time Lane Detection for Autonomous Vehicles – Ultrasonic Sensor
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
MOTORS, DRIVES &
CONTROL PROJECTS
• Fuzzy Logic based Speed Control of AC Motor using Microcontroller
with Line Fault Identification
• Fuzzy Logic based Speed Control of DC Motor
• Speed Control of AC Motor with Multi Parameter Monitoring
• Speed Control of DC Motor with Field & Armature Control
• Cycloconverter Drive for AC Motors
• Digital PID Controller based Speed Control of DC Motor
• Speed Control of a Linear Induction Motor V/F Technique
• Noise Less Speed Control of DC Motor using PWM Converter
• Brushless Speed Control of DC Motor
• PWM based Bidirectional Speed Control of DC Motor
• Voltage Stresses On Stator Windings of Induction Motors Driven By
IGBT PWM Inverters
• Sensor less Speed Control of AC Induction Motor using Microcontroller
• Speed Control of DC Motor using FQ / TQ Chopper Drive
• Cell Phone based Motor Speed Control
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Closed Loop Dc Motor Speed Controller
• Frequency Locked Loop Dc Motor Speed Control
• IGBT based Dc Motor Drive Control System
• Slip Ring induction Motor Drive with Slip Recovery using IGBT
• Efficiency Detector for Relay & Circuit Breaker
• Single Phase Multilevel Inverter SPWM with PC Interface and OLM
• Wireless DC Motor Speed Control using Triac
• Single Phase Input to DC Output – DC Motor Drive-Armature Voltage
Control
• Single Phase Thyristorized Power Controller for Industrial Applications
• Microcontroller based Firing Circuit for Thyristor Converters
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
POWER
ELECTRONICS
PROJECTS
• Energy Consumption, Meter Reading and Additional Power Requisition
System
• Alternative Energy Sources - Foot Power Generation
• Soil Moisture Content based Automatic Motor Starter for Irrigation
Purpose
• Trivector Meter – Design & Implementation
Station
• Portable Power Analyzer for Energy Audit
• Design & Implementation of 3Phase Power Changer
Automation
• Distance Protection – Power Theft Identification & Location Detection
• RF based Intelligent Handheld Multi-Parameter Monitoring System with
LCD Display and DAS
• Multiple Starters with Over Load and Low High Voltage Protection with
Multi Parameter Monitoring
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Smart Wind Mill based Power Generation System for Mobile Charging
• Energy Saving System using Thyristor Controllers
• Multiplexing Control of EMU
• SCR DCR Circuit Breaker
• Energy Saving Systems for Railway Platforms
• Intelligent Power Sharing of Transformers with Auto Protection
• RF enabled Energy Meter Digitization & Automation and Automatic
Utility Transfer with Two Way Communication
• Inverter based Low - High Input Voltage Buck Booster Converter System
• Multi Power Utilizer - Maximum Demand Indicator and Power Factor
Indicator
• Natural Failure Protector
• Distributed Control System for Industrial Transducers Failure Location &
Annunciation
• Protective Relay V, I, V/F Protection & Impedance Relay
• Soft Switching PWM Three Level Converters
• Soft Switching PWM Three Level Inverters
• Development of Energy Management and Warning System for Resident:
An Energy Saving
• Energy Efficient Target Coverage in Wireless Sensor Networks
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Design and Digital Monitoring of Uninterrupted Power Supply
• Life Cycle Testing of Electrical Components
• Multi Channel Temperature Indicator
• Battery Voltage and Current Monitoring for 8 Batteries
• Wireless Transformer Failure Analysis
• 3 Phase Prepaid Electricity Billing Automation
• Advanced Wireless Electrical Appliance Control System using PC and
Coded RF Protocol for industrial Application
• Advanced Wireless Electrical Meter Reading System
• Detection and Security System of Illegal Wireless Transmission
• Diagnosis of Fault Distribution Transformer
• Intelligent & Dynamic Power Saver & Control System for Industrial
Electrical Equipments
• Design and Practical Implementation of Internet based Predictive
Control of A Servo System
• Digital Tachometer using IR Optical Encoder Sensor
• Electronic Switching System and Tackling Power Cut
• Fault Location using Remote Connection, with Immediate Voice
Feedback
• Industrial Power Management System
• Multi Channel Temperature Measurement and Controller
• Multichannel Voltage Scanner and Control using SCADA
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• PID based Temperature Controller
• Intelligent Power Factor Indicator & Correction with Multiple Capacitor
Banks
• Power Generation through Solar Photovoltaic with Light Level Indication
• Power Line Monitoring with Seven Segment Display
• Protection of Turbo Alternators - Generator Protection
• Quasi Resonant Converter Fed DC Drive
• Remote Mobile Phone based Motor Starter for Irrigation Purpose
• SCR based Equipment Protection for Power Monitoring
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
AUTOMOBILE /
CAN BASED
PROJECTS
• Over speed indication and Automatic accident Avoiding System for four-
wheeler
• Automatic temperature controller with cooling system for car
• SMS Based automatic vehicle accident information system
• Remote controlled material handling equipment
• Automatic reserve indication system
• SMS based automatic two-wheeler locking system
• GPS based vehicle route tracking system
• Fabrication of Automatic headlamp alignment system with Dim/Bright
Controller
• Automatic sensor based wall painting robot
• GPS based automatic vehicle accident information system
• Remote controlled tilting handicapped wheel chair
• SMS based vehicle Ignition controlling system
• Electrical Power Generation system using Railway track
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Automatic material handling Fire Fighting Robot
• Cell phone controlled Solar Vehicle
• Automatic Railways Signaling System
• Automatic Rain operated wiper and Head light Dim/Bright Controller
• Artificial Intelligent Based Automatic Path finding Cum Video Analyzing
vehicle
• CAN based Smart Car Security System
• CAN based Exteriors – Design & Implementation
• Complete Automation of Automobile Control System using CAN
• CAN based Collision Avoidance System for Automobiles
• Control of Process Parameters in Industries using CAN
• Speedometer Implementation using CAN
• CAN based Industrial Automation
• Implementation of Airbag System through CAN
• Intellect speed breaker system using CAN
• Automotive Network Diagnostics with Crash Data Retrieval System
• Automated Vehicle Security System with ZigBee Keyless Entry over CAN
• Adaptive Front lighting System using Fuzzy Logic over CAN - LIN
Multiplexed Network
• Automatic Head Light Dimmer and Speed Control for Automotive
Vehicles using CAN-LIN
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
FUZZY LOGIC BASED
PROJECTS
• Fuzzy Elevators - Group Elevator Scheduling With Advance Information
for Normal and Emergency Modes in Building Management Systems
• Intelligent Fuzzy Control Guided Vehicle with Collision Prevention –
Ultrasonic based Distance Monitoring and Fuzzy based Collision Avoidance
• Fuzzy Logic based Automated Train
• Fuzzy Logic based Speed Control of AC Motor using Microcontroller
with Line Fault Identification
• Fuzzy Logic based Lift Control & Management System
• Fuzzy Logic based Speed Control of DC Motor
• Application of Fuzzy Logic in Intelligent Traffic Control Systems
• Control of Boiler Turbine Unit based on Fuzzy Logic System
• Fuzzified Computer Automated Crane Control System
• Fuzzy Logic based Control of Level in A Non-Linear Tank
• Fuzzy Rule based Object Identification Methodology for Navy System
• Fuzzy Speed Control of AC Motor using Microcontroller
• Intelligent Application of Fuzzy Logic in Automated Train Speed Control
System
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
SCADA BASED
PROJECTS
Automation
• SCADA for Instrumentation
SCADA
• SCADA based Waste Water Treatment
• Optical Isolated Transparency SCADA - for Telephone Exchange
• SCADA for Local Distribution Network
• Development of Human Machine Interface using any SCADA Package
• Fault Prediction in Quasi-Steady System with SCADA for Pressure &
Flow
• SCADA based Temperature Measurement & Control System
• Remote Digital RPM Indicator using Proximity or Magnetic Pick Up -
SCADA
• Remote Frequency Indicator with SCADA
• Remote Terminal Unit (RTU) & PLC System
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
PLC / THERMAL
PROJECTS
• PLC based Bottle Filling Station with Conveyor Model
• PLC based Automatic Boiler Management
• PLC based Automatic Car Parking System
• PLC based Door Open and Closing System
• PLC based Irrigation Controller for Garden
• PLC based Traffic Density Control using Sensor
• PLC based Wireless Energy Meter
• PLC based Control of Advertisement Display
• PLC with Internal Locking System and Control
• Multi Channel Temperature Measurement and Controller
• Temperature Monitoring and Control System with Automatic Equipment
Control using Computers
• Thermal Overload Protection for Transformer
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
SMS BASED
PROJECTS
• SMS based Universal Motor Speed Controller
• SMS based Remote Motor Starter for Irrigation in Agricultural
Application
• SMS Controlled Home Automation System
Systems using SMS based on Microcontroller
• SMS based Appliance Control System
• SMS Controlled Intelli Robot Materials Handling
• SMS Controlled Load Monitoring System
• Design and Implementation of Real Time Security Guard Robo using
GSM/CDMA Networking
• Ferreting Out Peripatetic Device using GSM Technology
• SMS enabled towards Command & Control Networking of Cooperative
Autonomous Robotics for Military Applications
• Automatic Taxi Trip Sensing and Indicating System through GSM
• GSM based Message Moving Display
• SMS based Anti Theft System for Vehicles
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• SMS based Automatic Electricity Bill Information System
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
AUTOMATION
PROJECTS
• Automatic Vehicle Speed Management System
• Control of Process Parameters in Industries using CAN
• Monitoring of Engine Parameters
• Train Engine Automation System
• Wireless Crane Control System using PC
• Intelligent System for Vehicle Parking Guidance System
• Intelligent System for Aiding Public In Transportation and Stage
Announcement System
• Car Speed Monitor and Data Logger System
• Solar Car Automation
• GPS & GSM Interface for Tracking System
• Accident Prevention System for Railways Using GPS
• Driver Assist Co-Pilot System for Emergency Cruise Control using
Hybrid Sensor Network of Wired CAN and Wireless PAN
• Smart Automatic Windscreen Wiper Control System using Fuzzy Logic
and LIN
• Automated Highway Network for Traffic Analyzer and Vehicle Speed
Regulator over CAN
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Train Collision Prevention System using Automatic Block Signaling
Network over CAN
• Hospital Area Network for Multiple ECG Signal Acquisition over High
Speed CAN
• Autonomous Self Parking Vehicle using CAN
• Smart Room Controller using Human Presence Detector
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
INDUSTRIAL
APPLICATIONS
PROJECTS
• High Speed Object Counter
• Maximum Demand Indicator & Controller
• Multi Channel Temperature Measurement & Controller
• Multiple Industrial Timer
• PC based Multi Channel Temperature Controller & Logger and Data
Analyzer
• Single Channel Temperature Measurement & Controller
• Ultrasonic Distance Monitor & Range Finder
• Water Control System for Rolling Mill
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
INSTRUMENTATION & LEVEL
MEASUREMENT PROJECTS
• SCADA for Instrumentation
• SCADA based Waste Water Treatment
• PH Measurement / Controller
• Boiler and Burner Management & Controller System
• Multichannel Petrochemical Fire Sensor, Monitoring and Control System
with Automatic Telephone Dialing
• Liquid Level Remote Transmitter
• Digital Temperature Indicator & Controller with DAS & Analyzer
• Multi Channel Temperature Scanner using Current Loop Transmission
• De-Icing Temperature Controller System PC based Multi Channel
Temperature Controller & Logger and DAS Analyzer
• Temperature Measurement & Controller for Furnaces with Different Time
Period & Set Points
• PC based Programmable Temperature Controller for Furnaces
• Digital Ph Measurement & Controller Meter
• PC based Programmable Temperature Controller for Cement Plant
• Fluid Level Monitoring System
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
PROCESS CONTROL
PROJECTS
• An on-Line Distributed System for Improved Real-Time Process
Performance
• Design Criteria for Obstacle Avoidance in A Shared Control System
• Design Methodology for Modeling A Microcontroller – Teleload Switch
• Digital PID Controller for Multi Channel Temperature using Frequency
Response / Root Locus Technique
• Digital Temperature Indicator & Controller with DAS & Analyzer
• Fuzzy Logic based Traffic Light Controller
• Industrial Annunciator with Voice, Alarm
• Multi Burner Management & Controller with Auto Flame Detection &
Failure Indicator
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
MECHANICAL & MODEL
BASED PROJECTS
• Automated Weigh Load Cell
• Automatic Motorized Electromagnetic Glass Door Open / Close
Mechanism
• Batch Weighing & Automation System
• Commercial Weighing System
• Multi Axis Stepper Controller / Driver with Opto Isolation
• Multi Axis Stepper Robotics with Artificial Intelligence
• Stain Gauge Weighing System
• Tank – Hopper Weighing System
• Textile Industries based Programmable Label Cutting Machine
• Two Axis Stepper Controller / Driver with Opto Isolation
• Fabrication of Remote operated weapon system
• Fabrication of sewage water treatment plant
• Fabrication of water cooler cum air conditioner
• Fabrication of transformer heat reduction system
• Fabrication of Soar Air conditioner
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Solar Powered Auto charging grinding machine
• Remote controlled tilting wheel chair for physically disables
• Automatic paint spraying pick and place Equipment
• Automatic Car Parking System for apartment Building
• Sensor Based Automatic paint marking machine for sprocket Industries
• Conveyor Belt Sequential Timer Controller with Model for Bottling Plant
• Automatic Vehicle Speed Management System
• Design of Induction Furnace Control System
• Boiler and Burner Management & Controller System
• Computer Controlled Drilling Machine
• Crane & Lift Operation Controlling and information System
• Computerized Thread Mill Implementation
• Conveyer Belt Monitoring & Control System
• Flow Totalizer - Computerized Flow Totalizer for Juice Industries
• Textile Industries based Programmable Label Cutting Machine
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
SOLAR SYSTEM
PROJECTS
• Effective Solar Tracking System for Optimal Power Generation and Lift
Operating Through Solar Power
• Wireless Remote Motor Starter with Acknowledgement using Solar
Energy Power for Agricultural Application Smart Solar Powered Car
• Smart Solar Tracking System for Optimal Power Generation
• Solar based Computerized Irrigation System
• Solar based Energy Saver Controllers
• Solar Cell Voltage Generation with Auto Tracking System
• Solar Powered Bike, Solar Power based Two Wheeler Systems
• Solar Powered Car, Solar Power based Car Navigation System
• Solar Powered Fence - Electrified Perimeter Fencing Systems
• Solar Powered Traffic Signals
• Solar Water Heater Controller with Temperature Display
• A Novel Optimum Operating Point Tracker of the Solar Cell Power
Supply System
• Solar Energized Artificial Intelligent Embedded Line Tracking Follower
Robot
• Solar Power for Automatic Water Heating / Solar Energy for Electrical
Applications
• Solar Powered Wireless Weather Station
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
AGRICULTURAL
PROJECTS
• Fabrication of Solar powered tealeaf-cutting machine
• Electricity and Water Pumping System using Wind Mill
• Fabrication of solar irrigation System
• Solar Powered Agricultural Water Pumping System with Auto Tracking
• Fabrication of Solar Seeds Sprayer
• Automatic Water level Sensing Crane
• Fabrication of Solar seed Dryer with Auto Tracking
• Automatic Moisture and Light Controlling System for Garden
• Automatic Water Tape Controlling System
• Automatic Packing control Machine
• Fabrication of Agricultural Motor Pump Running using Solar Power
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
MEMS
(MICRO ELECTRO MECHANICAL
SYSTEM)/ ELECTRO MECHANICAL /
MECHATRONICS
• Motion Operated Scrolling Display using MEMS Accelerometer and I2c
Protocol
• Miniature Wireless Sensor, MEMS based, Application in Cold Chain
(Food/Medicine Process) Logistics with Real Time Temperature
• Advanced Parachute Deployment System using MEMS Free Fall Detector
and I2c Protocol
• Automotive Crash Detection and Airbag Deployment using MEMS
Accelerometer
• Electronic Speedometer using Inertial MEMS Sensor and I2c Protocol
• Measuring and Transmitting Vital Body Signs using MEMS Sensor
• Motion Activated Power Saving System using MEMS Accelerometer and
I2c Protocol
• Motion Controlled Password System for Compact Embedded Systems
using MEMS Sensor
• Anti Theft System for Electronic Equipments using Inertial MEMS Sensor
and ZigBee
• Automotive Airbag Deployment System with Crash Data Logger using
MEMS Accelerometer
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Human Fall Protection System using Wearable Airbags and MEMS
Accelerometer
• Wireless Pervasive Health Care Monitoring System using MEMS &
ZigBee
• Advanced Collision Avoidance Solar Powered Robo Car with Automatic
Charger
• Automatic Plant Irrigation Robot with Self-Guided Action for Agricultural
Application
• Automatic, Advanced Robotic Arm for Welding in Automated Assembly
Line
• Hyper Line Tracking Control of Robotic Car using Track Sensors for
Industrial Application
• Non GPS Navigation with the Personal Dead Reckoning- Pdr System
• Self Direction Detected and Guided Robotic Vehicle with Magnetic
Compass Navigation
• Visual Servoving and Multi Directional Light Signature Sensing and
Approaching Robot with Edge Detector for Tunnel Application
• Automatic Car Parking System for apartment Building
• Fabrication of Remote operated weapon System
• Cell phone controlled pick and place robot
• SMS based automatic pneumatic Punching and riveting machine
• Video Analyzing remote controlled vacuum Cleaner
• SMS based automatic vehicle accident information system
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Automatic Distance Measurement and Braking System By using
Ultrasonic Waves
• SMS based Bomb detecting robot
• Fabrication of Automatic Vehicle Over speed controlling system for
School Zone
• Remote controlled Aircraft (Flying Model)
• GPS based vehicle route tracking system
• Fabrication of Automatic temperature controller with cooling system
• Remote controlled material handling motorized crane
• GPS based blind people path announcement system
• Automatic sensor based wall painting robot
• GSM based two wheeler security systems
• Two Wheeler Automation with security System
• Automatic Power Saving Conveyor for Industrial Application
• Automatic Visitor Guided with Material Handling Vehicle
• Automatic Break Failure and Engine Over Heating Indication
• Sensor Based Material loading/unloading system for different section
• SMS based Automatic two-wheeler locking system
• Auto head-lamp Alignment system for automobile
• Railways accident Avoiding System – (Level crossing and Fire Alarm)
• SMS based automatic drilling machine
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Fabrication of Solar automatic cell phone charger with pay system
• PC based Automatic sheet cutting Machine
• Automatic Vehicle Accident Information System
• Automatic Paint Spraying Equipment
• Automatic drunken drive avoiding system for automobile
• Remote controlled Vacuum Cleaning Robot
• Automatic Scrap Collecting Vehicle
• Automatic Fire fighting cum material handling vehicle
• Sensor Based Automatic paint marking machine for sprocket Industries
• Automatic railway track crack detecting Vehicle
• Design & Fabrication of Conveyor Automation
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
MORE EMBEDDED PROJECTS
• Digital Counter using CMOS Technology
• Need of Ad Hoc type Networking for Modern Airports for Aircraft
Landing
• A Proposal for Design of Hybrid Multi Functional Implantable Biochip
using Bio-intelligent Expert System
• A Survey of Communication Network Paradigms for Substation
Automation
• A Wireless Escape System for Industrial Accidents using Adhoc
Positioning
• AC Generator Monitoring – Generating Voltage, Oil Level, Fuel Level, Etc
Through Wireless
• Adhoc – Advanced Home Care System for Elderly Patients
• Advanced Digital Remote Panic Alarm Button for Bank / industrial
Application
• Advanced Full Function Remote Home Automation System using
Encrypted RF Technology
• Artificial intelligent based Equipments Failure Detecting & Automatic
Dialing to the Concern Service Engineer Cell-Phone / Telephone
• Attendance Marker System with IRC Reader and Face Indicator
• Automatic Cell Phone Detector and Mute Switch for TV / DVD
• Automatic Controller for Elevator and Escalator with Sensor Network &
AI
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Automatic Intelligent Plant Watering System
• Automatic Load Sharing of Transformers with Protective Analysis
• Automatic Repeat Protocol for Distribution Automation System through
Power line Communication
• Automatic Rolling Shutter Opener with RF Remote Control
• Automatic Room Light / Cooling System Controller with Visitor Counter
• Automatic System for Measuring & Controlling the Length of a Moving
Product in Industries
• Automatic Vehicle Location Tracking, Collision Avoidance with Dual
Communication using RF
• Automobile Exterior Safety System
• Autonomous Stabilization System for a Coaxial Helicopter
• Cable Fault Finder for Electrical Transmission Lines
• Cell Phone based Remote Car Starter
• Biometric Bank Locker System for Manager and Customer
• Bio-On Chip (B-Chip) Micro Miniaturized Wearable / Body Area Network
for Wireless Patient Monitoring
• Cell Phone based Total Car Controlling System – Car Moving, Forward,
Reverse, Etc.,
• Cell Phone Detector for Security Application
• Cell Phone to Cell Phone Appliance Control System
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Computer based Wireless Control System of Devices
• Computer Keyboard Dual Controller for Switching Electrical Devices
• Control of Pc DTMF Technology via Mobile Phone
• Design a Wireless Sensor Network for Methane Monitoring System
• Design and Implementation of Home Automation using CAN
• Digital Steam, Pressure and Liquid Level Monitor
• Digital Surface Distance / Length Measurement using Microcontroller
• Distributed Multi Area Power System Load Flow Monitoring
• Dynamic & Automatic Programmable Temperature Control System for
industrial Machineries Safety Control System
• Dynamic Security and Access Control System for 5 independent Zones
• E- Seal Applied in Fragile Safety in Transport, Real Time
• E-Driving License and intelligent E-Police Applied in Modern Electronic
Travel Aids – ETA
• Embedded based Level Controller with Two Tanks with Transparent
Level Display
• Embedded Controller for Non Linear Partially Interacting Process (NlPIP)
• E-Ticket Applied in Monitoring and Management Evaluation
• Embedded Microcontroller based Transformer Oil Testing Machine
• Embedded Microcontroller based Weighing Analyzer using Load Cell
• Embedded Microcontroller based PH Controller for Sugar Industries
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Embedded System based Inter Locking System of Electromagnetic
Doors Chemical, Cement & Pharmaceutical Industries
• Feeder Protective Relay Monitoring and Data Logger
• Frequency Division Multiplexing for a Multi-Sensor Wireless Telemetry
System
• Fully Automatic E-Filing System with Location, Tracking Applied in Real
Time Single Window System for Modern Govt. / Document / File
Management
• Garment Conveyor Remote Controller
• Guardhouse Visitor Screening Security System
• Handheld Electronic Voting Machine & Data Retrieval System
• Highway Car Accident Identification & Auto Communication to Patrol or
Hospital
• Hi-Tech Car with Remote Camera for the Police
• Implementation of Device Status Monitoring and Controlling using
Telephone Lines
• Humidity Monitoring and Pump Controlling System
• Implementation of Global and Remote Positioning System for Defense
and other Purposes using Mobile Networks
• Implementing Process Control & Monitoring System using Can
• Intelligent & Advanced Digital Wireless Audience Polling System for
Quiz Program
• Internet-Enabled Calibration Services: Design of a Secure Calibration
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
System
• Microcontroller based intelligent Multi-Timer System for industrial
Automation
• Microcontroller based Moving Person Place Detecting System (MPP)
• Mosfet based Current Mode Control Buck / Boost Converter
• Most Advanced Digital Wireless Two Wheeler Security System with
Remote Starter
• Multi Boiler Management & Controller with Auto Failure Indicator – Pcs
• Multi Zone Fire Alarming Control Panel with Zone Location, Auto Dialer
to Fire Station
• Multiple Programmable Batch Event Counter with Conveyor Belt
Arrangement
• Neural Implementation of Energy Consumption in Power Distribution
• People / Patient Tracking and Management System for Hospital / Factory
using Wireless Network System
• Pressure Sensor and Trigger System for industrial Application
• Production Automation and Control, Innovative Future Manufacturing
• Public Address System Controller - Automated Timing & Music System
• Microcontroller to Microcontroller Communication with LCD
• Radio Frequency Foot Pressure Measuring System
• Remote Camera Controller for Security Application using Servo Motor
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Remote Wireless Wind Speed Meter for Modern Remote Weather
Monitoring Station with Digital Read Out
• Research of Remote Real Time Monitor System for Electromechanical
Equipments based on Internet
• Robust Environmental Sound Recognition for Home Automation
• Room Humidity Checking with Air Conditioner Cooling Effect Controlling
System
• Route Selection for Vehicle Navigation and Control
• Sea Navigation for Rescue Operations using Microcontroller
• Simultaneous Localization, Mapping and Moving Object Tracking
• Single Phase integral Cycle Inverter using Mosfet
• Thyristor Controlled Heating System with Model
• Towards a Unified Location Tracking System for Heterogeneous
Industrial Environments
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
DOMAINS COVERED
Power Quality and Harmonics filters | ZVS and ZCS
converters | Improved power quality converters and inverters
| Power factor corrected AC-DC converters | Switching mode
converters | Multilevel inverters | Fuel cell based converters |
Power system based converters | Active Power Filtering
Concept | Switched Mode Power Supplies - SMPS |
Uninterruptible Power Supply - UPS | Solar Photo Voltaic
Power Conversion System - Solar Energy | Soft Switching
converters - ZVS and ZCS Converters | Matrix Converter for
Frequency Changing Power Supply Application | DC to DC
Converters
• Chopper drive for DC motor - Two Quadrant operation / Four Quadrant
operation
• DC Motor drive (Armature voltage control) - Single phase input-DC
output
• Protective Relay - DF/DT protection
• Speed control by slip power recovery scheme
• Thyristorized power controller for industrial application
• Multi Level Inverter-Single phase
• Robust PID controller for DC motor
• PWM based DC drive for bi-directional speed control using single
potentiometer
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Resonant inverter
• Fuzzy controller design for DC Motor speed control system
• Protective relay-V, I, V / F protection
• Protective relay-Impedance relay
• Voltage regulation of alternator
• Modeling & Analysis of a fuzzy logic based unified Power Controller
• A Novel thyristor based BLDC
• Linear induction Motor with V/F drive
• Power converter using control circuits
• Electric drives Modeling and their control
• Speed Control of DC motor using PWM technique
• Speed synchronization of two DC motors
• TRIAC based Speed Control Of Induction Motor
• Automatic load sharing of transformers
• Electrical Apparatus Control System In A Plant Using RF Wireless
Communication
• Microcontroller based Zero Voltage switching resonant converter
• Microcontroller based quasi resonant converter
• Microcontroller based PWM converter with minimum Hardware
• PWM inverter with minimum Hardware
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Microcontroller based measurement of flow, color, position and level
• Energy saving in Single Phase induction motor using A.C Chopper
• Microcontroller based Generator protection
• Microcontroller based induction heating
• Microcontroller based Transformer Protection
• Microcontroller based Induction motor protection
• Microcontroller based Thyristor Controlled Reactor
• Microcontroller based measurement of current, voltage, power factor
and temperature etc
• Resonant inverter
• Thyristor Switched Capacitor scheme for fast changing industrial loads
• Harmonic Reduction using Diode Clamped Multilevel Inverter
• Noiseless speed control of AC Servo Motor using PWM Inverter
• Third Harmonic auxiliary commutated Current Source Inverter with
minimum hardware
• Solid state transfer switch for custom power system
• Harmonic reduction using Capacitor Clamped Multilevel Inverter
• L-type High Frequency Quasi Resonant Zero Current Switch
• M-type High Frequency Quasi Resonant Switch
• Soft starter and energy saver for 1-phase Induction Motor using
Bidirectional Voltage Regulator
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Static excitation for large Alternator with fast response to improve
Dynamic Stability
• Performance of DC motor fed from Quasi Resonant Converter
• Integral Cycle Controlled Inverter fed Induction Motor drive
• FC-TCR type Static VAR generator for FACTS
• High frequency Zero Voltage Switching Resonant Converter
• ZVS Multi-resonant Quasi Resonant Converter
• Noiseless speed control of PM DC motor using PWM Converter
• SCADA for large scale power system
• Data Acquisition System for large electrical drive
• Four switch inverter for 3-phase BLDC motor
• Two input full bridge DC TO DC Converter for selective Harmonic
elimination
• Severless DC to DC Boost Converter using Comparator
• Two input Full Bridge Inverter with improved output waveform
• A New Simplified Multilevel Inverter topology for DC-AC Conversion
• Boost DC-AC Inverter: A New Control Strategy
• Electrical Network Automation & Communication Systems
• Energy Saver for Auditoriums
• Fault Tolerant Neuro Controlled Level Processing Panel
• IGBT based PWM Inverter using Microcontroller
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Measurement of the Radio Frequency Signal of A Circuit-Breaker
• Programmable Temperature Control System
• Power Line Fault Analysis, Monitoring and Load Sharing System
• Remote Access Control and Automation System for Electrical
Appliances using Telephone Line
• Centralized Electricity Billing Through Telephone Line
• Electricity Billing System Automation with IRC Reader
• Fault Location using Remote Connection, with Immediate Voice
Feedback
• Energy Management System for Pulse Output Meters
• Programmable active power factor improvement scheme for single
phase switch mode boost rectifiers
• SVPWM Techniques and Applications in HTS PMSM Machines Control
• Space vector pulse width modulation of three level inverter extending
operation into over modulation region
• Impact of Reactive Power in Power Evacuation from Wind Turbines
• Transient Fault Response of Grid Connected Wind Electric Generators
• PMSM Speed Sensor less Direct Torque Control Based on EKF
• Zbus Transmission Network Cost Allocation
• Electromagnetic Interference with Electronic apparatus by switching
surges in GIS – Cable system
• Predictive Valley Current Control for Two Inductor Boost Converter
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• A Modular Fuel Cell, Modular DC–DC Converter Concept for High
Performance and Enhanced Reliability
• A Simple Control Scheme for Single-Phase Shunt Active Power Filter
with Fuzzy Logic Based DC Bus Voltage Controller
• A 24-pulse AC-DC converter employing a pulse doubling technique for
vector controlled induction motor drives
• Modeling of three levels converters used in Electric Traction
• Harmonic Current Reduction in Railway System
• Second Order Sliding Mode for Traction Control in Ride-by-Wire Sport
Motorcycles
• A Modular Strategy for Control and Voltage Balancing of Cascaded H-
Bridge Rectifiers
• Development of a Slip and Slide Simulator for Electric Locomotive
Based on Inverter Controlled Induction Motor
• Power Quality Analysis of Traction Supply Systems with High Speed
Train using Active Filters to Reduce THD in Traction Systems
• Direct torque with fuzzy logic ripple reduction based stator flux vector
control
• Optimized Discontinuous PWM Algorithm With Variable Load Power
Factor For Multilevel Inverters
• Novel Direct Power Control for Compensating Voltage Unbalance and
Load Fluctuations in PWM Rectifiers
• New DTC Control Scheme for Induction Motors fed with a Three-level
Inverter
• Sensor less Speed Estimation of Induction Motor in a Direct Torque
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Control System
• MRAS based Speed Control of sensorless Induction Motor Drives
• A Novel Technique for Distribution System Feeder reconfiguration
• Power Upgrading of Transmission Line by Combining AC–DC
Transmission
• A Single Phase Z-Source Cycloconverter (SPZC) Based on Single Phase
Matrix Converter (SPMC) Topology with Safe Commutation Strategy
• Simulation of a Space Vector PWM Controller for a Three-Level Voltage
Fed Inverter Motor Drive
• Optimal Intelligent Controller for Matrix Converter Induction Motor Drive
System
• 3-Phase Power Factor Correction, Using Vienna Rectifier Approach &
Modular Construction for Improved Overall Performance, Efficiency &
Reliability
• A Comparative Study between two Strategies for Four-Wire Shunt Active
Filter Control
• A Simple New Control Technique For Unified Power Quality Conditioner
(UPQC)
• Direct Power Control for three-phase PWM rectifier with active filtering
function
• Space Vector Control of 5-phase PMSM supplied by 5 H-bridge VSIs
• Simulation and Modeling of a Dynamic Voltage Restorer.
• Dynamic modeling, design and simulation of a wind/fuel cell/ultra-
capacitor-based hybrid power generation system
• Sensor less Control of Interior Permanent-Magnet Machine Drives With
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Zero Phase Lag Position Estimation
• Torque-Ripple Minimization in Switched Reluctance Machines Over a
Wide Speed Range
• Torque-Ripple Minimization in Switched Reluctance Motors Using
Adaptive Fuzzy Control
• Possibility of Power Tapping From Composite AC–DC Power
Transmission Lines
• Prediction-based ripple reduction in Direct Torque Control of an
induction machine
• Artificial Neural Network Controlled Shunt Active Power Filter
• Three-phase, power quality improvement ac/dc converters
• DTC-SVM Scheme for Induction Motors Fed with a Three-level Inverter
• Real and Reactive Power Coordination for a Unified Power Flow
Controller
• Control and Analysis of a Unified Power Flow Controller
• Performance Analysis of Fuzzy Logic Based Unified Power Flow
Controller
• Direct Power Control Strategies for Multilevel Inverter Based Custom
Power Devices
• Switching Losses and Harmonic Investigations in Multilevel Inverters
• Modeling and Control of a Fuel Cell Based Z-Source Converter
• Fuzzy Control of Fuel Cell Distributed Generation Systems
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Intelligent Control of Fuel Cell Distributed Generation Systems
• Modeling and Control of Fuel Cell Based Distributed Generation
Systems in a Standalone AC Power Supply
• A Low-Cost Inverter for Domestic Fuel Cell Applications
• Analysis and Design Considerations of Zero-Voltage and Zero-Current
Switching (ZVZCS) Full-Bridge PWM Converters
• A Fast Space-Vector Modulation Algorithm for Multilevel Three-Phase
Converters
• Fuzzy Logic Controller Based Three-phase Shunt Active Filter for Line
Harmonics Reduction
• A Fuzzy-Controlled Active Front-End Rectifier with Current Harmonic
Filtering Characteristics and Minimum Sensing Variables
• The use of Facts devices in disturbed Power Systems-Modeling,
Interface, and Case Study
• A Novel Maximum Power Point Tracker for PV Panels Using Switching
Frequency Modulation
• Single Phase Power Factor Correction: A Survey
• Modified SVPWM Algorithm for Three Levels VSI With Synchronized and
Symmetrical Waveforms
• A Closed Loop Observer for Rotor Flux Estimation in Induction
Machines
• Fuzzy Logic Speed Control of a DC Motor
• A New Topology for Unipolar Brushless DC Motor Drive with High Power
Factor
• The Discontinuous Conduction Mode Sepic and Cuk Power Factor
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
Preregulators: Analysis and Design
• Development of Low Cost Multi Phase Brushless DC (BLDC) Motors with
Unipolar Current Excitations
• Direct Torque Control of Five-Phase Induction Motor Using Space Vector
Modulation with Harmonics Elimination and Optimal Switching Sequence
• Optimal Placement of Shunt Connected Facts Device in a Series
Compensated Long Transmission Line
• PSCAD/EMTDC Simulation of Unified Series-Shunt Compensator for
Power Quality Improvement
• Effects of Power Oscillations Damping Controllers by UPFC Using
Different Fault Conditions
• Transient Stability Improvement of SMIB With Unified Power Flow
Controller
• Control of Grid-interfacing Inverters with Integrated Voltage Unbalance
Correction
• Three-Leg VSC and a Transformer Based Three-Phase Four-Wire
DSTATCOM for Distribution Systems
• Modeling of a DSTATCOM with Ultra Capacitor Energy Storage for Power
Distribution System Applications
• Control strategies for distribution static compensator for power quality
improvement
• Optimization of PI Coefficients in DSTATCOM Nonlinear Controller for
Regulating DC Voltage using Genetic Algorithm
• Operation and Control of Single Phase Micro Sources in a Utility
Connected Grid
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Voltage Flicker Compensation using STATCOM
• A Novel Voltage-Boosting Converter with Passive Voltage Clamping
• Pulse Width Modulated Buck-Boost Five-Level Current Source Inverters
• Wound Rotor Induction Generator With Sensor less Control and
Integrated Active Filter for Feeding Nonlinear Loads in a Stand-Alone Grid
• Optimum Control of Selective and Total Harmonic Distortion in Current
and Voltage Under Non sinusoidal Conditions
• Filter based non-invasive control of chaos in Buck converter
• Voltage and Energy Utilization Enhancement in a Stand-alone WECS
Using a Fuzzy Logic Controlled SPWM Converter Interface Scheme
• Hybrid Cascaded Multilevel Inverter with PWM Control Method
• Fuzzy Logic Based Control of Variable Speed Induction Machine wind
Generation System
• Control of Three Phase, Four-Wire PWM Rectifier
• Indirect Matrix Converter Based on Investigations of Field-oriented
control for Induction Motor
• Two-stage Matrix Converter Used in Wind Power Generation System
Application Research
• Development of a Grid – Connected WIND/PV/BESS Hybrid Distributed
Generation System
• Improvement of Voltage Stability and Reduce Power System Losses by
Optimal GA based Allocation of Multi-type FACTS Devices
• Impacts of AC Generators and DSTATCOM Devices on the Dynamic
Performance of Distribution Systems
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Digital Signal Controllers Improve Efficiency for Solar power Inverters
• The Use of Matrix Converters in Direct Torque Control of Induction
Machines
• Analysis of Different Schemes of Matrix Converter with Maximum
Voltage Conversion Ratio
• Power Flow Control with UPFC in Power Transmission System
• Wind driven self excited induction generator with voltage and frequency
regulated by a reduced rating voltage source inverter
• A new fuzzy color correlated impulse noise reduction method
• A unified three phase transformer model for distribution load flow
calculations
• Power flow control with UPFC in power transmission system
• Experiment on Fractional Frequency Transmission System
• A space Vector Modulation Scheme to Reduce Common Mode Voltage
for Cascade Multilevel Inverters
• Analysis, Design and Implementation of modified single phase inverter
• Switching Frequency Imposition and Ripple Reduction in DTC Drives by
Using Multilevel Converter
• Simultaneous Phase Balancing at Substations and Switches with Time-
Varying Load Patterns
• Consideration of Input Parameter Uncertainties in Load Flow Solution of
Three-Phase Unbalanced Radial Distribution System
• A Three-Phase Power Flow Method For Real-Time Distribution System
Analysis
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• Novel Method of Load Compensation under Unbalanced & Distorted
Voltages
• Development of Three-Phase Unbalanced Power Flow Using PV and PQ
Models for Distributed Generation and Study of the Impact of DG Models
• Position Control Design Project (PD Controller – Root – Locus Design)
• Multi-Input Inverter for Grid-Connected Hybrid PV/Wind Power System
• Unbalanced Three-Phase Distribution System Load-Flow Studies
Including Induction Machines
• Power Flow Control in a Distribution System Through an Inverter
Interfaced Distributed Generator
• A simple Circuit-Oriented model for predicting six-phase induction
machine performances
• Photovoltaic-Battery-Powered DC Bus System for Common Portable
Electronic Devices
• A Fast and Accurate Maximum Power Point Tracker for PV Systems
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
FINAL YEAR PROJECTS
2013 - 2014
Why NCCT
Complete Guidance * On time
Completion * Excellent Support
Multi platform Training * Flexibility
PROJECTS SUPPORTS & DELIVERABLES
• Projec t Abst rac ts & IEEE Paper
• Projec t Block Diagram & Circuit
Diagram
• Datasheets and Manuals
• PPT & Review Details Guidanc e
• Projec t Repo rt Guidanc e
• Working Proc edure & Screen Shots
• Materials & Referenc e Books in DVD
• Projec t Compl etion Certific ate
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
IEEE DOMAINS
IEEE TRANSACTIONS
PROJECTS ON
• AUTOMATIC CONTROL
• BIOMEDICAL ENGINEERING
• BROADCASTING
• COMMUNICATIONS
• CONSUMER ELECTRONICS
• CONTROL SYSTEMS
• ENERGY CONVERSION
• FUZZY SYSTEMS
• INDUSTRIAL ELECTRONICS
• INSTRUMENTATION AND MEASUREMENT
• INTELLIGENT TRANSPORTATION SYSTEMS
• POWER ELECTRONICS
• POWER SYSTEMS
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• ROBOTICS
• VLSI SYSTEMS
• WIRELESS COMMUNICATIONS
• MICROELECTROMECHANICAL SYSTEMS
• MECHATRONICS
We are offering Wide Range of
Projects in IEEE Domains including
Embedded Microcontroller Kits,
Models
Any IEEE & NON IEEE Projects in
any Domain / any Application can be
Implemented
Do you have any Innovative /
Challenging Projects or Concepts
needs to be Developed, We are here
to do it…
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
EMBEDDED PROJECT
DOMAINS
• BIO MEDICAL
• BIO METRICS - FINGER PRINT, RFID, VOICE
• ROBOTICS
• SECURITY SYSTEM
• TELE COMMUNICATION
• COMMUNICATION
• UNWIRED - ZIGBEE, RFID, GSM, RF, BLUETOOTH,
WIFI, GPS
• WIRED - RS232, RS485, USB, CAN
• ELECTRICAL
• JAMMERS
• MOTORS, DRIVES & CONTROLS
• NETWORKING
• POWER ELECTRONICS - DC TO DC, BUCK BOOST,
INVERTERS, POWER FACTOR, CONVERTERS,
HARMONICS & FILTERS, IMPEDANCE
• GPS
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• TOUCH SCREEN
• ULTRASONIC
• ACCESS CONTROL
• INTELLIGENT TRANSPORT SYSTEM
• SENSORS NETWORK - WIRELESS SENSORS NETWORK
• AUTOMATION AND CONTROL
• AUTOMOTIVE
• ENERGY MANAGEMENT
• POWER SYSTEMS
• CONSUMER ELECTRONICS
• INDUSTRIAL ELECTRONICS
• ENCRYPTION AND DECRYPTION
• CAN / DAS / DCS / PLC / SCADA
• ARTIFICIAL INTELLIGENCE / FUZZY LOGIC / NEURAL
NETWORKS
• IVRS / SMS
• INSTRUMENTATION
• LEVEL & ANALYTICAL INSTRUMENTATION
• MEASUREMENT AND CONTROL SYSTEM
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
• PROCESS CONTROL
• WEIGHING SYSTEM
• MECHANICAL
• MECHATRONICS
• MEMS
• WINDMILL
• SOLAR
• THERMAL
• AGRICULTURAL
Any IEEE & NON IEEE Projects in any
Domain / any Application can be
Implemented
Do you have any Innovative / Challenging
Projects or Concepts needs to be
Developed, We are here to do it…
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

NCCT
Final Year Projects
PROJECTS 2013-14
MICROCONTROLLERS - 8051 from Atmel / ARM - ARM7, ARM9 /
Microchip - PIC 16x, DSPIC / Atmel AVR
DSP - Texas Instruments - MSC1210xx, MSP430xx / Analog
Devices - ADSP, Blackfin
VLSI - Cypress – PsoC / Xilinx - FPGAs & CPLDs / Altera -
FPGAs & CPLDs
Peripheral Interface: CAN, USB, Ethernet, SPI, I2C, PS/2, RS232,
RS485
Wireless: RF Tx Rx, GSM/GPRS, GPS, Bluetooth, IrDA, RFID,
Zigbee
Server - Intel Pentium Dual Core Server Running Windows
Clients - Intel & AMD powered Client PC(s) running Windows
XP, Linux
Networking - Routers, Switches and Wireless Access Points
Telecommunication Modules & Devices, CAT 5 Cables, Cross
Over Cables, Modems
NCCT, 109, 2nd
044-2823 5816, 98411 93224, 89393 63501

03 2013-14 embedded systems project list - non ieee based embedded - electronics - electrical - power electronics - 2013-14

More Related Content

Viewers also liked (9)

Similar to 03 2013-14 embedded systems project list - non ieee based embedded - electronics - electrical - power electronics - 2013-14 (20)

More from ncctstudentprojects (14)

Recently uploaded (20)

03 2013-14 embedded systems project list - non ieee based embedded - electronics - electrical - power electronics - 2013-14